L.E.D Hitch Step BBS-1104L

INSTALLATION INSTRUCTIONS

1

2

3

1. INSERT THE HITCH STEP AND PLACE YOURHITCH PIN IN POSITION. PUSH THE ANTI-RATTLEHITCH STABILIZER INTO THE HITCH RECEIVERTIGHTLY TO FILL UP THE GAP ON THE TOP OFTHE BAR.

2. MARK THE EXACT POSITION AND REMOVE THEHITCH STEP FROM YOUR RECEIVER. REMOVE THE3M TAPE BACKING ON THE ANTI-RATTLE HITCH STABILIZER AND REPOSITION THE SHIM 1/16” INFRONT OF YOUR MARKED POSITION. PRESS DOWNON THE SHIM FIRMLY TO ENSURE A SECURE MOUNT.

3. NOW YOU ARE READY TO RE-INSERT YOUR HITCHSTEP BACK INTO THE HITCH RECEIVER AND SECUREIT WITH A BULLY HITCH PIN LOCK (#CR-094)

THE ANTI RATTLE HITH STABILIZER WILL ELIMINATE ANNOYING HITCH BOXAND HITCH MOUNT CHATTERING RATTLES WHILE YOU DRIVE.

ANTI-RATTLE

L.E.D Hitch StepBBS-1104L

WIRING INSTRUCTIONS