Make a Card 1. Fold the card in half 2. Glue the backs together 3. Cut along the dashed line
Animate a Name
Try these cards in any order:
• Change Color • Grow and Shrink • Draw a Letter • Spin • Bounce • Wave • Bounce Everywhere • New Backdrop • Say Something • Add Background Music • Sprite Dance • Play a Beat
Based on scratch.mit.edu/name, developed by Natalie Rusk of the Scratch Team
Animate a Name
Animate the letters of a name, sport, hobby or anything you like!
Make a Card 1. Fold the card in half 2. Glue the backs together 3. Cut along the dashed line
ADD THIS CODE
Try different numbers.
TRY ITClick the sprite.
Change Color
GET READY
Add or select a sprite.
Change Color
Change the color of a letter when it’s clicked.
1Animate a Name
Change Colorg.co/csfirst/nysdcard
Make a Card 1. Fold the card in half 2. Glue the backs together 3. Cut along the dashed line
Spin
Add a letter and rotate the sprite when it’s clicked.
2Animate a Name
GET READY
ADD THIS CODE
Try different number combination to change the spin.
TRY ITClick the sprite.
TIPClick this block to reset the sprite’s direction.
Add or select a sprite.
Sping.co/csfirst/nysdcard
Make a Card 1. Fold the card in half 2. Glue the backs together 3. Cut along the dashed line
GET READY
ADD THIS CODE
Type a positive number to get bigger.
Type a negative number to get smaller.
TRY ITClick the sprite.
TIP
Add or select a sprite.
Add this block to play a sound when the sprite is clicked.
Select different sounds to try.
Grow and Shrinkg.co/csfirst/nysdcard
Grow and Shrink
Change the size of a letter when it’s clicked and add a sound to match
the animation.
3Animate a Name
Make a Card 1. Fold the card in half 2. Glue the backs together 3. Cut along the dashed line
GET READY
TIP
TRY ITClick the sprite.
Select paint tool and draw a new letter.
Click the tab.
Draw a Letterg.co/csfirst/nysdcard
Draw a Letter
Draw your own letter and make it move.
4Animate a Name
Add movementto bring the sprite to life.
Make a Card 1. Fold the card in half 2. Glue the backs together 3. Cut along the dashed line
GET READY
ADD THIS CODE
TIPAdd sound to the bouncing sprite.
Type a positive number to move up.
Add or select a sprite.
Type a negative number to move down.
Bounceg.co/csfirst/nysdcard
Bounce
Move the sprite up and down and add sound as it bounces.
5Animate a Name
TRY ITClick the sprite.
Make a Card 1. Fold the card in half 2. Glue the backs together 3. Cut along the dashed line
GET READY
Choose or customize a new sprite.
Waveg.co/csfirst/nysdcard
Wave
Create and change to different costumes.
6Animate a Name
Add or make several costumesfor the sprite.
ADD THIS CODE
Add a “wait” block if you want more time between switching costumes.
TRY ITClick the sprite.
Make a Card 1. Fold the card in half 2. Glue the backs together 3. Cut along the dashed line
ADD THIS CODE
TRY IT
TIP
Click the sprite.
GET READY
Insert the pick random operator block.
When you drag a sprite, its x and y position will update in the blocks.
Type different numbers to change the x and y position.
Bounce Everywhereg.co/csfirst/nysdcard
Bounce Everywhere
Move the sprite all around the stage, then make it return to a specific point.
7Animate a Name
Add or select a sprite.
Make a Card 1. Fold the card in half 2. Glue the backs together 3. Cut along the dashed line
New Backdrop
Switch to a different backdrop by clicking the sprite.
8Animate a Name
ADD THIS CODE
TRY ITClick the sprite.
GET READY
Create, select or add several backdrops to your project.
Add or select a sprite.
Switch the backdropwith this code block.
New Backdropg.co/csfirst/nysdcard
Make a Card 1. Fold the card in half 2. Glue the backs together 3. Cut along the dashed line
Say Something
Make the letters talk to each other when the green flag is clicked.
9Animate a Name
ADD THIS CODE
TRY IT
TIP
Click the green flag to start.
GET READY
Select two or more sprites to begin talking.
Add separate blocks for each sprite you want to say something.
Say Somethingg.co/csfirst/nysdcard
Make a Card 1. Fold the card in half 2. Glue the backs together 3. Cut along the dashed line
Add Background Music
When you click a sprite, play a song and change the background.
10Animate a Name
ADD THIS CODE
TRY IT
TIP
Click the sprite.
GET READY
Add or select a sprite.
Add this block to switch the backdrop with the music.
Choose a sound.
Click the tab.
Add Background Musicg.co/csfirst/nysdcard
Select the sound you chose.
Make a Card 1. Fold the card in half 2. Glue the backs together 3. Cut along the dashed line
Sprite Dance
Make a sprite dance when the sprite is clicked.
11Animate a Name
ADD THIS CODE
TRY IT
TIP
Click the sprite.
GET READY
Add or select a sprite.
Change the effect to try different movements with your sprite.
Make your sprite whirlback and forth by usingdifferent positive and negative numbers.
Sprite Danceg.co/csfirst/nysdcard
Make a Card 1. Fold the card in half 2. Glue the backs together 3. Cut along the dashed line
Play a Beat
Play a drum when the sprite is clicked.
12Animate a Name
ADD THIS CODE
TRY IT
TIP
Click the sprite.
GET READY
Add or select a sprite.
Add other “sound” code blocks for different instruments.
Change the numberand pace of beatsby adjusting these numbers.
Play a Beatg.co/csfirst/nysdcard
Hacer una tarjeta 1. Dobla la tarjeta en la mitad
2. Pega las 2 mitades posteriores entre sí
3. Realiza un corte siguiendo la línea con rayas
Prueba estas tarjetas en cualquier orden:
• Cambiar Color • Crecer y Encoger • Dibujar una Letra • Girar • Rebotar • Saludar • Rebotar en Todos Lados • Nuevo Fondo • Decir Algo • Baile de Objetos • Agregar Música de Fondo • Reproducir Ritmo
Basado en scratch.mit.edu/name, desarrollado por Natalie Rusk del equipo de Scratch
Animar un nombreAnima las letras de un nombre, un deporte,
un pasatiempo o lo que te guste.
Animar un nombre
Hacer una tarjeta 1. Dobla la tarjeta en la mitad
2. Pega las 2 mitades posteriores entre sí
3. Realiza un corte siguiendo la línea con rayas
AGREGAR ESTE CÓDIGO
PROBARLOHaz clic en el objeto.
Change Color
PREPÁRATE
Agrega o selecciona un objeto.
Cambiar Color
Cuando haces clic en una letra, cambia el color.
1
Animar un nombre
Cambiar Colorg.co/csfirst/nombre
Prueba diferentes números.
Hacer una tarjeta 1. Dobla la tarjeta en la mitad
2. Pega las 2 mitades posteriores entre sí
3. Realiza un corte siguiendo la línea con rayas
Girar
Haz clic en una letra para hacerla girar.
Prueba diferentes combinaciones de número para cambiar el giro.
Girarg.co/csfirst/nombre
PREPÁRATE
AGREGAR ESTE CÓDIGO
Agrega o selecciona un objeto.
PROBARLOHaz clic en el objeto.
2
Animar un nombre
Haz clic en este bloque para restablecer la dirección del objeto.CONSEJO
Hacer una tarjeta 1. Dobla la tarjeta en la mitad
2. Pega las 2 mitades posteriores entre sí
3. Realiza un corte siguiendo la línea con rayas
Escribe un número positivo para que se crece.
Escribe un número negativo para que se encoge.
Crecer y Encogerg.co/csfirst/nombre
Crecer y Encoger
Haz clic en el objeto para que cambie su tamaño y agrega un sonido para que
coincida con la animación.
PREPÁRATE
AGREGAR ESTE CÓDIGO
Agrega o selecciona un objeto.
PROBARLOHaz clic en el objeto.
3
Animar un nombre
Agrega este bloque para reproducir un sonido cuando haces clic en el objeto.CONSEJO
Selecciona diferentes sonidos para probarlos.
Hacer una tarjeta 1. Dobla la tarjeta en la mitad
2. Pega las 2 mitades posteriores entre sí
3. Realiza un corte siguiendo la línea con rayas
Selecciona la herramienta de pintura para dibujar una letra nueva.
Dibujar una Letrag.co/csfirst/nombre
Dibujar una Letra
Dibuja tu propia letra y haz que se mueva.PREPÁRATE
PROBARLOHaz clic en el objeto.
4
Animar un nombre
Agrega movimiento para darle vida al objeto.
CONSEJO
Hacer una tarjeta 1. Dobla la tarjeta en la mitad
2. Pega las 2 mitades posteriores entre sí
3. Realiza un corte siguiendo la línea con rayas
Rebotarg.co/csfirst/nombre
Rebotar
Mueve el objeto hacia abajo y arriba, y agrega un sonido mientras rebota.
PREPÁRATE
AGREGAR ESTE CÓDIGO
Agrega o selecciona un objeto.
PROBARLOHaz clic en el objeto.
5
Animar un nombre
Escribe un número positivo para que se mueva hacia arriba.
Escribe un número negativo para que se mueva hacia abajo.
Agrega sonido al objeto que rebota.CONSEJO
Hacer una tarjeta 1. Dobla la tarjeta en la mitad
2. Pega las 2 mitades posteriores entre sí
3. Realiza un corte siguiendo la línea con rayas
Elige o personaliza un objeto nuevo.
Saludarg.co/csfirst/nombre
Saludar
Crea diferentes disfraces y cambia entre ellos.
Agrega o crea varios disfraces para el objeto.
PREPÁRATE
PROBARLOHaz clic en el objeto.
6
Animar un nombre
AGREGAR ESTE CÓDIGO
Agrega un bloque “esperar” si deseas que pase más tiempo entre los cambios de disfraces.
Hacer una tarjeta 1. Dobla la tarjeta en la mitad
2. Pega las 2 mitades posteriores entre sí
3. Realiza un corte siguiendo la línea con rayas
CONSEJO
Inserta un bloque del menú operadores“Número el azar.”
Cuando arrastras un sprite, se actualizará su posición en “x” y “y” en los bloques.
Prueba diferentes números para cambiar la posición X, Y.
Rebotar en Todos Ladosg.co/csfirst/nombre
Rebotar en Todos Lados
Mueve el objeto por todo el escenario.PREPÁRATE
AGREGAR ESTE CÓDIGO
Agrega o selecciona un objeto.
PROBARLOHaz clic en el objeto.
7
Animar un nombre
Hacer una tarjeta 1. Dobla la tarjeta en la mitad
2. Pega las 2 mitades posteriores entre sí
3. Realiza un corte siguiendo la línea con rayas
Nuevo Fondo
Cuando haces clic en el objeto, cambia el fondo.
Crea, selecciona o agrega varios fondos al proyecto.
Cambia el fondo con este bloque de código.
Nuevo Fondog.co/csfirst/nombre
PREPÁRATE
AGREGAR ESTE CÓDIGO
PROBARLOHaz clic en el objeto.
8
Animar un nombre
Agrega o selecciona un objeto.
Hacer una tarjeta 1. Dobla la tarjeta en la mitad
2. Pega las 2 mitades posteriores entre sí
3. Realiza un corte siguiendo la línea con rayas
Decir Algo
Cuando haces clic en la bandera verde, haz que los objetos hablan entre sí.
CONSEJO
Haz clic en la bandera verde para comenzar.
Selecciona dos o más objetos para que hablen.
Agrega bloques separados en cada objeto que quieres que diga algo.
Decir Algog.co/csfirst/nombre
PREPÁRATE
AGREGAR ESTE CÓDIGO
PROBARLO
9
Animar un nombre
Hacer una tarjeta 1. Dobla la tarjeta en la mitad
2. Pega las 2 mitades posteriores entre sí
3. Realiza un corte siguiendo la línea con rayas
Agregar Música de Fondo
Cuando haces clic en un objeto, reproduce un sonido y cambia el fondo.
Elige un sonido.
Haz clic en la ventana sonidos.
Agregar Música de Fondog.co/csfirst/nombre
Selecciona el sonido que eliges.
PREPÁRATE
AGREGAR ESTE CÓDIGO
Agrega o selecciona un objeto.
PROBARLOHaz clic en el objeto.
10
Animar un nombre
Agrega este bloque para cambiar el fondo con la música.
Hacer una tarjeta 1. Dobla la tarjeta en la mitad
2. Pega las 2 mitades posteriores entre sí
3. Realiza un corte siguiendo la línea con rayas
Baile de Objetos
Cuando haces clic en el objeto, baila.
CONSEJOCambia el efecto para probar varios movimientos con el objeto.
Baile de Objetosg.co/csfirst/nombre
PREPÁRATE
AGREGAR ESTE CÓDIGO
Agrega o selecciona un objeto.
PROBARLOHaz clic en el objeto.
11
Animar un nombre
Para hacer que el objeto remolino hacia atrás y adelante, usa diferentes números positivos y negativos.
Hacer una tarjeta 1. Dobla la tarjeta en la mitad
2. Pega las 2 mitades posteriores entre sí
3. Realiza un corte siguiendo la línea con rayas
Reproducir Ritmo
Cuando haces clic en el objeto, reproduce un redoble de tambor.
CONSEJOAgrega otros bloques de “tocar sonido” para sumar otros instrumentos.
Ajusta estos números para cambiar la cantidad y el ritmo de los golpes.
Reproducir Ritmog.co/csfirst/nombre
PREPÁRATE
AGREGAR ESTE CÓDIGO
Agrega o selecciona un objeto.
PROBARLOHaz clic en el objeto.
12
Animar un nombre
Top Related