CENTROIDTM CNC Touch ProbeDP-4
Accurate & Reliable alternative to expensive CNC Touch Probes
• UnidirectionalRepeatability.00004”(1micron)• PartProbing,FixtureOffsets,&Digitizing• StateoftheartKinematicdesign•Mountstoany1/2”toolholder•Customizablemountforspecialapplications• Smalldiameterbody1.25”(31.8mm)•Cablecommunicationforreliability• InterchangeableStyli•WorkswithmostanyCNCcontrolorDROwithaprobeinputandprobesoftware
Forusewith:MachiningCenters,TurningCenters,Routers,CMMs,Horizontals,Gantries,BedMills,KneeMills&more.
CENTROID159 Gates Road • Howard, PA 16841Sales: (814) 353-9256 • Fax: (814) 353-9265www.centroidcnc.com
© Copyright 2012 CENTROID 3-12-13 rev 8
• Copyandreproducecomplex3Dpartsfromoriginals• AutomaticJob&WorkCoordinateSystemsetup• Measurepartsbeforetheyareremovedfromthemachine• Eliminatetheneedforexpensiveindicatorsandfixtures• Moreaccurateandrepeatablethanmanualpartsetup• Increasethroughputonthemachine• Reducereworkandscrap,shortenleadtimes
Probing directions X +/- , Y +/- , Z -
Unidirectional repeatability 0.00004” (1 um)
Probe deflection force (X,Y) 3 ounce w/ 1.693” L (43mm) stylus
Probe deflection force (Z) 9 ounce minimum
Probe body diameter and length D=1.25” (31.8mm), L=2.2” (56.4mm)
Mounting shank diameter D=0.5” (12.7mm), L=1.47” (37.2mm)
Stylus thread mount M3
Over travel limit angle (X,Y) +/- 10 degrees from vertical
Over travel limit (Z-) 0.15 inch (3.8mm) maximum
U.S Patent # 6553682
DP-4Specifications
TheCENTROIDDP-4CNCTouchprobeisdesignedforProbing(partsetup,zerolocationsetup,andCMMtypelocationandmea-surementofpartgeometry),component/fixture/workpiecesetup,inspectionand3Dor2Ddigitizing/surfacing.TheDP-4CNCTouchprobeismadeintheUSAwithpatentedtechnology.ManufacturedofstainlesssteeltheDP-4’smechanismrequiresonlyafeatherstouchtotrigger.TheDP-4’slowtriggerforceallowstheuseofsmallstyliformaximumdetailandaccuracy.CommonlyusedonMill-ingMachines,Machiningcenters,RoutersandTurningcenters.TheDP-4isastateoftheartmechanicaldesignandiscompatiblewithmostCNCcontrolsandDRO’sthathaveaPLCinputforprobesandprobesoftware.TheCENTROIDDP-4isreliableandisanaffordablealternativetoRenishaworMarposstouchprobes.PreviouslysoldexclusivelyforusewithaCENTROIDCNCcontrol,nowtheDP-4isavailableforusewithotherCNCcontrolsandDRO’ssuchasFagor,Haas,Fanuc,Fadal,Mazak,Mach3andmanymore.
• Increasemachinetoolautomationandreducehumanerror• AutomaticVise/Fixturesetup,noalignmentneeded• WorksinconjunctionwithCoordinateSystemRotation.• Findsdiameters,locations,angles&features• Automaticpartfeaturelocationandsetup,greatforrepairs• Muchfasterthansettinguppartsmanually• Nobatteries,nolightingrestrictions,noRFcrosstalk,forreliableeasyplug-and-playoperation
Kitcontains:DP-4probe,manual,externalprobecable,internalcontrolcable*,2.5mmstylus,5mmstylus,tools,1”standardboregauge,MoldMagicsoftware.
Renishaw is a registered trademark of Renishaw plc UK, Marposs is a registered trademark of Marposs S.p.A ItalyAll other trademarks and registered trademarks are the property of their respective owners.
Top Related