Owner's Manual.MINI Countryman.MINI Paceman.
ContentsA-Z
Online Edition for Part no. 01 40 2 911 521 - VI/13
COOPERCOOPER S
JOHN COOPERWORKS
Owner's Manual for VehicleThank you for choosing a MINI.The more familiar you are with your vehicle, the better controlyou will have on the road. We therefore strongly suggest:Read this Owner's Manual before starting off in your new MINI. Itcontains important information on vehicle operation that willhelp you make full use of the technical features available in yourMINI. The manual also contains information designed to en‐hance operating reliability and road safety, and to contribute tomaintaining the value of your MINI.Supplementary information can be found in the additional bro‐chures in the onboard literature.Set off now and have fun with your MINI.The MINI Team of BMW AG
Online Edition for Part no. 01 40 2 911 521 - VI/13
© 2013 Bayerische Motoren WerkeAktiengesellschaftMunich, GermanyReprinting, including excerpts, only with the writtenconsent of BMW AG, Munich.US English VI/13, 07 13 500Printed on environmentally friendly paper, bleachedwithout chlorine, suitable for recycling.
Online Edition for Part no. 01 40 2 911 521 - VI/13
ContentsThe fastest way to find information on a partic‐ular topic or item is by using the index, refer topage 208.
6 Notes
At a glance14 Cockpit
Controls22 Opening and closing36 Adjusting44 Transporting children safely49 Driving59 Displays67 Lamps72 Safety81 Driving stability control systems84 Driving comfort87 Climate92 Interior equipment102 Storage compartments
Driving tips110 Things to remember when driving114 Loading118 Saving fuel
Entertainment122 Radio MINI Boost CD
Communication136 Telephone
Mobility148 Refueling150 Fuel152 Wheels and tires164 Engine compartment166 Engine oil168 Coolant169 Maintenance171 Replacing components180 Breakdown assistance186 Care190 Indicator/warning lamps
Reference204 Technical data208 Everything from A to Z
Online Edition for Part no. 01 40 2 911 521 - VI/13
NotesUsing this Owner'sManualThe fastest way to find information on a partic‐ular topic is by using the index.An initial overview of the vehicle is provided inthe first chapter.
Additional sources of informationShould you have any questions, your servicecenter will be glad to advise you at any time.Information on MINI, e.g., on technology, isavailable on the Internet: www.mini.com
Symbols Indicates precautions that must be followed
precisely in order to avoid the possibility of per‐sonal injury and serious damage to the vehicle.◄ Marks the end of a specific item of informa‐tion."..." Identifies radio display texts used to selectindividual functions.›...‹ Verbal instructions to use with the voice op‐eration system.››...‹‹ Identifies the answers generated by thevoice operation system.
Refers to measures that can be taken tohelp protect the environment.
Symbols on vehicle components Indicates that you should consult the rele‐
vant section of this Owner's Manual for infor‐mation on a particular part or assembly.
Vehicle equipmentThe manufacturer of your MINI is the Bayeri‐sche Motoren Werke Aktiengesellschaft, BMWAG.This Owner's Manual describes all models, allseries equipment, as well as country-specificand special equipment offered in the modelseries. Therefore, this Owner's Manual also de‐scribes and depicts equipment that may not becontained in your vehicle because of the se‐lected special equipment or country version, forexample.This also applies to safety-related functions andsystems.For options and equipment not described inthis Owner's Manual, please refer to the Sup‐plementary Owner's Manuals.On right-hand drive vehicles, some controls arearranged differently than shown in the illustra‐tions.
Status of this Owner'sManual at time of print‐ingThe manufacturer of your vehicle pursues apolicy of constant development that is con‐ceived to ensure that our vehicles continue toembody the highest quality and safety stan‐dards. In rare cases, therefore, the features de‐scribed in this Owner's Manual may differ fromthose in your vehicle.
Seite 6
Notes
6 Online Edition for Part no. 01 40 2 911 521 - VI/13
For your own safetyWarrantyYour vehicle is technically configured for theoperating conditions and registration require‐ments applying in the country of first delivery— homologation. If your vehicle is to be oper‐ated in a different country it might be neces‐sary to adapt your vehicle to potentially differ‐ing operating conditions and permitrequirements. If your vehicle does not complywith the homologation requirements in a cer‐tain country you cannot lodge warranty claimsfor your vehicle there. Further information canbe obtained from your Service Centre.
Maintenance and repairsAdvanced technology, e.g., the use of modernmaterials and high-performance electronics,requires suitable maintenance and repairmethods.Therefore, have this work performed only by aMINI service center or a workshop that worksaccording to MINI repair procedures with ap‐propriately trained personnel.
If this work is not carried out properly, there isthe danger of subsequent damage and relatedsafety hazards.
Parts and accessoriesFor your own safety, use genuine parts and ac‐cessories approved by the manufacturer of theMINI. When you purchase accessories testedand approved by the manufacturer of the MINIand Original MINI Parts, you simultaneously ac‐quire the assurance that they have been thor‐oughly tested by the manufacturer of the MINIto ensure optimum performance when instal‐led on your vehicle. The manufacturer of theMINI warrants these parts to be free from de‐fects in material and workmanship. The manu‐facturer of the MINI will not accept any liabilityfor damage resulting from installation of partsand accessories not approved by the manufac‐
turer of the MINI. The manufacturer of the MINIcannot test every product made by other man‐ufacturers to verify if it can be used on a MINIsafely and without risk to either the vehicle, itsoperation, or its occupants. Original MINI Parts,MINI Accessories and other products approvedby the manufacturer of the MINI, together withprofessional advice on using these items, areavailable from all MINI Dealers. Installation andoperation of non-MINI approved accessoriessuch as alarms, radios, amplifiers, radar detec‐tors, wheels, suspension components, brakedust shields, telephones, including operation ofany mobile phone from within the vehicle with‐out using an externally mounted antenna, ortransceiver equipment, for instance, CBs,walkie-talkies, ham radios or similar accesso‐ries, may cause extensive damage to the vehi‐cle, compromise its safety, interfere with thevehicle's electrical system or affect the validityof the MINI Limited Warranty. See your MINIDealer for additional information. Maintenance,replacement, or repair of the emission controldevices and systems may be performed by anyautomotive repair establishment or individualusing any certified automotive part.
California Proposition 65 WarningCalifornia laws require us to state the followingwarning:Engine exhaust and a wide variety of automo‐bile components and parts, including compo‐nents found in the interior furnishings in a vehi‐cle, contain or emit chemicals known to theState of California to cause cancer and birth de‐fects and reproductive harm. In addition, cer‐tain fluids contained in vehicles and certainproducts of component wear contain or emitchemicals known to the State of California tocause cancer and birth defects or other repro‐ductive harm. Battery posts, terminals and re‐lated accessories contain lead and lead com‐pounds. Wash your hands after handling. Usedengine oil contains chemicals that have causedcancer in laboratory animals. Always protect
Seite 7
Notes
7Online Edition for Part no. 01 40 2 911 521 - VI/13
your skin by washing thoroughly with soap andwater.
Service and warrantyWe recommend that you read this publicationthoroughly. Your vehicle is covered by the fol‐lowing warranties:▷ New Vehicle Limited Warranty.▷ Rust Perforation Limited Warranty.▷ Federal Emissions System Defect Warranty.▷ Federal Emissions Performance Warranty.▷ California Emission Control System Limited
Warranty.Detailed information about these warranties islisted in the Service and Warranty InformationBooklet for US models or in the Warranty andService Guide Booklet for Canadian models.Your vehicle has been specifically adapted anddesigned to meet the particular operating con‐ditions and homologation requirements in yourcountry and continental region in order to de‐liver the full driving pleasure while the vehicle isoperated under those conditions. If you wish tooperate your vehicle in another country or re‐gion, you may be required to adapt your vehi‐cle to meet different prevailing operating con‐ditions and homologation requirements. Youshould also be aware of any applicable war‐ranty limitations or exclusions for such countryor region. In such case, please contact Cus‐tomer Relations for further information.
MaintenanceMaintain the vehicle regularly to sustain theroad safety, operational reliability and the NewVehicle Limited Warranty.Specifications for required maintenance meas‐ures:▷ MINI Maintenance system▷ Service and Warranty Information Booklet
for US models▷ Warranty and Service Guide Booklet for
Canadian models
If the vehicle is not maintained according tothese specifications, this could result in seriousdamage to the vehicle. Such damage is notcovered by the MINI New Vehicle Limited War‐ranty.
Data memoryNumerous electronic components in your vehi‐cle contain data memories that store technicalinformation on the vehicle condition, eventsand faults, either temporarily or permanently.This technical information generally documentsthe state of a component, a module, a systemor the environment.▷ Operating conditions of system compo‐
nents, such as filling levels.▷ Status messages from the vehicle and its in‐
dividual components, such as wheel rpm/speed, motion delay, transverse accelera‐tion.
▷ Malfunctions and defects in important sys‐tem components, such as lights and brakes.
▷ Vehicle responses to special driving situa‐tions, such as airbag deployment, use ofthe stability control systems.
▷ Ambient conditions, such as the tempera‐ture.
These data are of a technical nature only andare used to detect and eliminate faults and tooptimize vehicle functions. Travel profiles ofroutes driven with the vehicle cannot be cre‐ated from these data. If services are used, forinstance in the event of repairs, service proc‐esses, warranty cases, quality assurance, etc.,this technical information can be read out fromthe event and fault data memories by servicepersonnel, including the manufacturer, usingspecial diagnosis tools. This service personnelcan provide you with more information ifneeded. After troubleshooting, the informationin the fault memory is cleared or overwrittencontinuously.
Seite 8
Notes
8 Online Edition for Part no. 01 40 2 911 521 - VI/13
Situations are conceivable during the use of thevehicle in which these technical data could be‐come associated with a specific person in com‐bination with other information, such as an ac‐cident report, damage to the vehicle, witnessaccounts, etc., possibly with the involvement ofan authorized expert.Additional functions that are contractuallyagreed with the customer, such as vehicle lo‐calization in the event of an emergency, permitthe transfer of certain vehicle data out of thevehicle.
Event Data Recorder EDRThis vehicle is equipped with an event data re‐corder EDR. The main purpose of an EDR is torecord, in certain crash or near crash-like situa‐tions, such as an air bag deployment or hittinga road obstacle, data that will assist in under‐standing how a vehicle's systems performed.The EDR is designed to record data related tovehicle dynamics and safety systems for a shortperiod of time, typically 30 seconds or less.The EDR in this vehicle is designed to recordsuch data as:▷ How various systems in your vehicle were
operating.▷ Whether or not the driver and passenger
safety belts were fastened.▷ How far, if at all, the driver was depressing
the accelerator and/or brake pedal.▷ How fast the vehicle was traveling.These data can help provide a better under‐standing of the circumstances in which crashesand injuries occur.EDR data are recorded by your vehicle only if anontrivial crash situation occurs; no data are re‐corded by the EDR under normal driving condi‐tions and no personal data, e.g., name, gender,age, and crash location, are recorded.However, other parties, such as law enforce‐ment, could combine the EDR data with the
type of personally identifying data routinely ac‐quired during a crash investigation.To read data recorded by an EDR, specialequipment is required, and access to the vehi‐cle or the EDR is needed. In addition to the ve‐hicle manufacturer, other parties, such as lawenforcement, that have the special equipment,can read the information if they have access tothe vehicle or the EDR.
Reporting safety defectsFor US customersThe following only applies to vehicles ownedand operated in the US.If you believe that your vehicle has a defectwhich could cause a crash or could cause injuryor death, you should immediately inform theNational Highway Traffic Safety AdministrationNHTSA, in addition to notifying BMW of NorthAmerica, LLC, P.O. Box 1227, Westwood, NewJersey 07675-1227, Telephone1-800-831-1117.If NHTSA receives similar complaints, it mayopen an investigation, and if it finds that asafety defect exists in a group of vehicles, itmay order a recall and remedy campaign.However, NHTSA cannot become involved inindividual problems between you, your dealer,or BMW of North America, LLC.To contact NHTSA, you may call the VehicleSafety Hotline toll-free at 1-888-327-4236(TTY: 1-800-424-9153); go to http://www.safe‐rcar.gov; or write to: Administrator, NHTSA, 400Seventh Street, SW., Washington, DC 20590.You can also obtain other information aboutmotor vehicle safety from http://www.safe‐rcar.gov
For Canadian customersCanadian customers who wish to report asafety- related defect to Transport Canada, De‐fect Investigations and Recalls, may telephone
Seite 9
Notes
9Online Edition for Part no. 01 40 2 911 521 - VI/13
the toll-free hotline 1-800-333-0510. You canalso obtain other information about motor ve‐hicle safety from http://www.tc.gc.ca/roadsaf‐ety.
Seite 10
Notes
10 Online Edition for Part no. 01 40 2 911 521 - VI/13
At a glance
Controls
Driving tips
Entertainment
Communication
Mobility
Reference
Online Edition for Part no. 01 40 2 911 521 - VI/13
CockpitVehicle equipmentThis chapter describes all series equipment aswell as country-specific and special equipmentoffered for this model series.Therefore, it also
describes equipment that may not be found inyour vehicle, for instance due to the selectedspecial equipment or the country version. Thisalso applies to safety-related functions and sys‐tems.
All around the steering wheel
1 Setting the exterior mirror, folding it in andout 42
Power windows, front 34
MINI Countryman: power win‐dows, rear 34
MINI Countryman: safety switchfor rear power windows 35
2 Parking lamps 67
Low beams 67
Automatic headlamp con‐trol 67Adaptive Light Control 69Turn signal 52
High beams 52Headlamp flasher 52
Seite 14
At a glance Cockpit
14 Online Edition for Part no. 01 40 2 911 521 - VI/13
Roadside parking lamps 68
Computer 60
3 Tachometer 60Instrument lighting 70
Resetting the trip odometer 59
4 Washer/wiper system 53
5 Start/stop the engine and switchthe ignition on/off 49
6 Ignition lock 497 Steering wheel buttons, right
Resuming cruise control 85
Storing the speed and accelerat‐ing or slowing down 85
Activating/deactivating cruisecontrol 84
Steering wheel buttons, leftVolume
Telephone 136
Change the radio stationSelect a music trackScroll through the redial list
8 Horn, the entire surface9 Adjust the steering wheel 4310 Releasing the hood 165
Seite 15
Cockpit At a glance
15Online Edition for Part no. 01 40 2 911 521 - VI/13
Displays
1 Tachometer 60with indicator and warning lamps 17
2 Display for▷ Current speed 59▷ Indicator/warning lamps 17
3 Resetting the trip odometer 594 Display for
▷ Automatic transmission position 56▷ Computer 60▷ Service requirements 64▷ Odometer and trip odometer 59
▷ Flat Tire Monitor 75▷ Tire Pressure Monitor 75▷ Settings and information 61▷ Personal Profile settings 22
5 Instrument lighting 706 Speedometer with indicator and warning
lamps 177 Fuel gauge 608 Radio display9 RadioRadio MINI Boost CD 122
Seite 16
At a glance Cockpit
16 Online Edition for Part no. 01 40 2 911 521 - VI/13
Indicator/warning lampsThe concept
The indicator and warning lamps can light up ina variety of combinations and colors in displayarea 1 or 2.
Several of the lamps are checked for properfunctioning when the engine is started or theignition is switched on, and light up briefly.
What to do in case of a malfunctionA list of all indicator and warning lamps, as wellas notes on possible causes of malfunctionsand on how to respond, refer to page 190.
All around the center console
1 Hazard warning system2 Speedometer with
Radio MINI Boost CD 1223 CD drive
4 Air conditioning, automatic climate con‐trol 87
5 Buttons on the center console
Seite 17
Cockpit At a glance
17Online Edition for Part no. 01 40 2 911 521 - VI/13
Seat heating 38
Central locking, inside 27
Front fog lamps 70
Sport button 83
Driving stability control systemsDSC Dynamic Stability Con‐trol 81DTC Dynamic Traction Con‐trol 82
6 Storage compartment
All around the head‐liner
1 Indicator/warning lamps for the front pas‐senger airbags 74
2 Reading lamps 71
Ambient lighting color 71
Glass sunroof, electrical 32
Interior lamps 70
All around the shift/selector lever
1 AUX-IN port 130USB audio interface 131
Seite 18
At a glance Cockpit
18 Online Edition for Part no. 01 40 2 911 521 - VI/13
At a glance
Controls
Driving tips
Entertainment
Communication
Mobility
Reference
Online Edition for Part no. 01 40 2 911 521 - VI/13
Opening and closingVehicle equipmentThis chapter describes all series equipment aswell as country-specific and special equipmentoffered for this model series.Therefore, it alsodescribes equipment that may not be found inyour vehicle, for instance due to the selectedspecial equipment or the country version. Thisalso applies to safety-related functions and sys‐tems.
Remote control/keyButtons on the remote control
1 Opening tailgate2 Unlocking3 Locking
General informationEach remote control contains a rechargeablebattery that is automatically recharged when itis in the ignition lock while the car is beingdriven. Use each remote control at least twice ayear for longer road trips in order to maintainthe batteries' charge status. In vehicles equip‐ped with Comfort Access, the remote controlcontains a replaceable battery, refer topage 32.The settings called up and implemented whenthe vehicle is unlocked depend on which re‐
mote control is used to unlock the vehicle, Per‐sonal Profile, refer to page 22.In addition, information about service require‐ments is stored in the remote control, Servicedata in the remote control, refer to page 169.
Integrated key
Press button 1 to unlock the key.
The integrated key fits the following locks:▷ Driver's door, refer to page 26.
New remote controlsYou can obtain new remote controls from yourservice center.
Loss of the remote controlsLost remote controls can be blocked by yourservice center.
Personal ProfileThe conceptYou can set several of your vehicle's functionsto suit your personal needs and preferences.▷ Through Personal Profile, most of these set‐
tings are stored for the remote control cur‐rently in use.
▷ While the vehicle is being unlocked, the re‐mote control is recognized and the settings
Seite 22
Controls Opening and closing
22 Online Edition for Part no. 01 40 2 911 521 - VI/13
stored with it are called up and imple‐mented.
▷ Your personal settings will be recognizedand called up again even if the vehicle hasbeen used in the meantime by someoneelse with another remote control.
▷ The individual settings are stored for nomore than three remote controls.
Personal Profile settingsThe following functions and settings can bestored in a profile.More information on the settings can be foundunder:▷ Response of the central locking system
when the car is being unlocked, refer topage 24.
▷ Automatic locking of the vehicle, refer topage 28.
▷ Triple turn signal activation, refer topage 52.
▷ Settings for the displays in the speedometerand tachometer:▷ 12h/24h clock format, refer to
page 62.▷ Date format, refer to page 62.▷ Units of measure for fuel consumption,
distance covered/remaining distances,and temperature, refer to page 62.
▷ Light settings:▷ Headlamp courtesy delay feature, refer
to page 69.▷ Daytime running lights, refer to
page 68.▷ Automatic climate control, refer to
page 89: AUTO program, activating/deac‐tivating the cooling function, setting thetemperature, air volume, and air distribu‐tion.
▷ Entertainment:▷ Last entertainment source.
▷ Radio MINI Boost CD:Tone settings, refer to page 124.Volume, refer to page 124.
Central locking systemThe conceptThe central locking system becomes activewhen the driver's door is closed.The system simultaneously engages and re‐leases the locks on the following:▷ Doors.▷ Tailgate.▷ Fuel filler flap.
Operating from the outside▷ Via the remote control.▷ Via the door lock.▷ In cars with Comfort Access, via the door
handles on the driver's and front passengersides.
The following takes place simultaneously whenlocking/unlocking the vehicle via the remotecontrol:▷ Depending on the vehicle equipment, the
anti-theft protection is switched on and offas well. The anti-theft protection makes itimpossible to unlock the doors using thelock buttons or door handles.
▷ The welcome lamps, interior lamps, andambient lighting are switched on and off.
▷ The alarm system is armed or disarmed, re‐fer to page 32.
Operating from the insideVia the switch/button for the central lockingsystem, refer to page 27.In an accident of the necessary severity, thecentral locking system unlocks automatically.
Seite 23
Opening and closing Controls
23Online Edition for Part no. 01 40 2 911 521 - VI/13
The hazard warning system and interior lampscome on.
Opening and closing:from the outsideUsing the remote control
General informationTake the remote control with youPeople or animals left unattended in a
parked vehicle can lock the doors from the in‐side. Always take the remote control with youwhen leaving the vehicle so that the vehiclecan then be opened from the outside.◀
Unlocking
Press the button. The vehicle is un‐locked.The welcome lamps and interior lamps areswitched on.You can set how the vehicle is to be unlocked.The setting is stored for the remote control cur‐rently in use.
1. Switch on the ignition, refer to page 49.2. Press the button on the turn indicator lever
repeatedly until "SET/INFO" is displayed.
3. Press and hold the button until the displaychanges.
4. Press the button repeatedly until the sym‐bol and "SET" are displayed.
5. Press and hold the button until the displaychanges.
6. Press the button repeatedly until the sym‐bol shown is displayed, arrow.
7. Press and hold the button until the displaychanges.
8. Press the button to select:▷
Pressing the button once un‐locks only the driver's door and the fuelfiller flap. Pressing twice unlocks theentire vehicle.
▷
Pressing the button once un‐locks the entire vehicle.
9. Press and hold the button until the displaychanges. The setting is stored for the re‐mote control currently in use.
Seite 24
Controls Opening and closing
24 Online Edition for Part no. 01 40 2 911 521 - VI/13
Convenient opening
Press and hold the button on the re‐mote control.The power windows are opened and the glasssunroof is raised.Convenient closing with the remote control isnot possible.
Locking
Press the button.Locking from the outsideDo not lock the vehicle from the outside if
there are people in it, as the vehicle cannot beunlocked from inside without special knowl‐edge.◀
Setting the confirmation signalsHave unlocking or locking of the vehicle con‐firmed.
1. Switch on the ignition, refer to page 49.2. Press the button on the turn indicator lever
repeatedly until "SET/INFO" is displayed.
3. Press and hold the button until the displaychanges.
4. Press the button repeatedly until the sym‐bol and "SET" are displayed.
5. Press and hold the button until the displaychanges.
6. Press the button to select, arrow:▷ Confirmation signal during unlock‐
ing▷ Confirmation signal during locking
7. Press and hold the button until the displaychanges.
8. Press the button to select:▷
The hazard warning system flashes dur‐ing unlocking/locking.
▷ An acoustic signal sounds during un‐locking/locking.
▷ The hazard warning system lights upand an acoustic signal sounds duringunlocking/locking.
▷
Seite 25
Opening and closing Controls
25Online Edition for Part no. 01 40 2 911 521 - VI/13
The function is deactivated.9. Press and hold the button until the display
changes. The setting is stored.
Switching on the interior lampsWhen the vehicle is locked:
Press the button.You can also use this function to locate your ve‐hicle in parking garages, etc.
Unlocking the tailgate
Press the button for approx. 1 secondand then release it.The tailgate pivots back and up when it opens.Ensure that adequate clearance is available be‐fore opening.
MalfunctionsThe function of the remote control may be im‐paired by local radio waves. If this occurs, un‐lock and lock the vehicle at the door lock withthe integrated key.If it should become impossible to lock the vehi‐cle with a remote control, the battery in the re‐mote control is discharged. Use this remotecontrol on an extended trip to recharge thebattery, refer to page 22.
For US owners onlyThe transmitter and receiver units comply withpart 15 of the FCC/Federal CommunicationCommission regulations. Operation is governedby the following:FCC ID:LX8766SLX8766ELX8CASCompliance statement:This device complies with part 15 of the FCCRules. Operation is subject to the following twoconditions:
▷ This device may not cause harmful interfer‐ence, and
▷ this device must accept any interference re‐ceived, including interference that maycause undesired operation.
Any unauthorized modifications or changes tothese devices could void the user's authority tooperate this equipment.
Using the door lock
Sets how the vehicle is to be unlocked, refer topage 24.
In some vehicle equipment versions, only thedriver's door can be unlocked and locked viathe door lock.
Locking from the outsideDo not lock the vehicle from the outside if
there are people in it, as the vehicle cannot beunlocked from inside without special knowl‐edge.◀
Locking the doors and tailgate at onceTo lock all doors, the fuel filler flap, and the tail‐gate at once:
1. With the doors closed, lock the vehicle us‐ing the button for the central locking sys‐tem in the interior, refer to page 27.
2. Unlock and open the driver's or front pas‐senger door, refer to page 27.
3. To lock the vehicle:▷ Lock the driver's door using the
integrated key in the door lock, or
Seite 26
Controls Opening and closing
26 Online Edition for Part no. 01 40 2 911 521 - VI/13
▷ Press down the lock button of the frontpassenger door and close the doorfrom the outside.
Convenient opening and closingIn vehicles with an alarm system or Comfort Ac‐cess, the windows and the glass sunroof can beoperated via the door lock.
Opening/closingTurn the key to the unlock or lock position andhold it there.
Keep the closing area clearWatch during the opening and closing
process to be sure that no one becomes trap‐ped. Releasing the key stops the motion.◀
Manual operationIf an electrical malfunction occurs, the driver'sdoor can be unlocked or locked by turning theintegrated key to the end positions of the doorlock.
Opening and closing:from the insideOperation via▷ Switch in the center console:
▷ Button in the driver's or front passengerdoor:
The graphic shows the button in the MINI Pace‐man as an example.The switch or the buttons can be used to lockor unlock the doors and tailgate when thedoors are closed, but they are not theft-pro‐tected. The fuel filler flap remains unlocked.
Unlocking and opening doors▷ Using the switch or the buttons for the cen‐
tral locking system, unlock all of the doorsat once and then pull the door openerabove the armrest, or
▷ Pull the door handle on each door twice:the door is unlocked the first time andopened the second time.
Locking▷ Press the switch/button or▷ Push down the lock button of a door. To
avoid locking yourself out by accident, thedriver's door cannot be locked at the lockbutton while the door is open.
Seite 27
Opening and closing Controls
27Online Edition for Part no. 01 40 2 911 521 - VI/13
Automatic lockingIn addition, it is possible to set the situations inwhich the vehicle locks. The setting is stored forthe remote control in use.
1. Switch on the ignition, refer to page 49.2. Press the button on the turn indicator lever
repeatedly until "SET/INFO" is displayed.
3. Press and hold the button until the displaychanges.
4. Press the button repeatedly until the sym‐bol and "SET" are displayed.
5. Press and hold the button until the displaychanges.
6. Press the button repeatedly until the sym‐bol shown is displayed, arrow.
7. Press and hold the button until the displaychanges.
8. Press the button to select:▷
The central locking system locks auto‐matically after some time if no door isopened.
▷ The vehicle locks automatically afteryou drive away.
▷ The vehicle locks automatically after ashort period of time if a door is notopened or after you drive away.
▷ The central locking system remains un‐locked.
9. Press and hold the button until the displaychanges. The setting is stored.
TailgateOpeningThe tailgate pivots back and up when it opens.Ensure that adequate clearance is available be‐fore opening.
Provide edge protectionSharp or angular objects can hit the rear
window while driving and damage the heatingwires of the rear window. Provide edge protec‐tion.◀
Only drive with the tailgate fully closed; other‐wise, the tail lamps will be hidden from viewand driving safety will be compromised.In some market-specific versions, the tailgatecan only be unlocked using the remote controlif the vehicle was unlocked first.
Seite 28
Controls Opening and closing
28 Online Edition for Part no. 01 40 2 911 521 - VI/13
Opening from the inside
Press the button on the driver's footwell.
MINI Countryman
Press the top half of the MINI emblem, arrow,or
Press the button on the remote controlfor approx. 1 second and release. The tailgate isunlocked.
MINI Paceman
Press the top half of the MINI emblem, arrow,or
Press the button on the remote controlfor approx. 1 second and release. The tailgate isunlocked.
ClosingKeep the closing area clearMake sure that the closing area of the
tailgate is clear; otherwise, injuries or damagemay result.◀
Take the remote control with youAlways take the remote control with you
when leaving the vehicle and do not place it inthe cargo area; otherwise, the remote controlmay be locked into the vehicle when the tail‐gate is closed.◀
MINI Countryman
Recessed grips on the inside trim of the tailgatecan be used to conveniently pull down the tail‐gate.
Seite 29
Opening and closing Controls
29Online Edition for Part no. 01 40 2 911 521 - VI/13
MINI Paceman
Recessed grips on the inside trim of the tailgatecan be used to conveniently pull down the tail‐gate.
Comfort AccessThe conceptThe vehicle can be accessed without activatingthe remote control. All you need to do is tohave the remote control with you, e.g., in yourjacket pocket. The vehicle automatically de‐tects the remote control when it is nearby or inthe passenger compartment.Comfort Access supports the following func‐tions:▷ Unlocking/locking of the vehicle.▷ Unlocking of the tailgate separately.▷ Starting the engine.
Functional requirements▷ There are no external sources of interfer‐
ence in the vicinity.▷ To lock the vehicle, the remote control
must be located outside of the vehicle.▷ The next unlocking and locking cycle is not
possible until after approx. 2 seconds.▷ The engine can only be started if the re‐
mote control is inside the vehicle.▷ The doors and tailgate must be closed to
operate the windows.
Comparison with ordinary remotecontrolThe functions can be controlled by pressing thebuttons or via Comfort Access.Notes on opening and closing, refer to page 22.If you notice a brief delay while opening orclosing the windows or glass sunroof, the sys‐tem is checking whether a remote control is in‐side the vehicle. Repeat the opening or closingprocedure, if necessary.
Unlocking
Press button 1.
Depending on the setting, either only the driv‐er's door or the entire vehicle is unlocked, referto page 24.Pressing the button again locks the entire vehi‐cle again.Convenient opening with the remote control,refer to page 25.
LockingPress button 1.For Convenient closing, press and hold but‐ton 1.The windows and glass sunroof are closed inaddition.
Unlocking the tailgate separatelyPress the top half of the MINI emblem.This corresponds to pressing the following but‐
ton on the remote control: .
Seite 30
Controls Opening and closing
30 Online Edition for Part no. 01 40 2 911 521 - VI/13
If a remote control accidentally left in the cargoarea is detected in the locked vehicle after thetailgate is closed, the tailgate opens againslightly. The hazard warning system flashes andan acoustic signal sounds.
Power windows and electrical glasssunroofWhen the engine is switched off, the windowsand the sunroof can be operated as long asneither the doors nor the tailgate are opened.When the door and tailgate are closed againand the remote control is detected inside thevehicle, the windows and the sunroof can beoperated again.Insert the remote control into the ignition lockto be able to operate the windows and the sun‐roof while the engine is switched off and thedoors are open.
Switching on the radio ready statePress the Start/Stop button to switch on theradio ready state, refer to page 49.Do not depress the brake or the clutch; other‐wise, the engine will start.
Starting the engineThe engine can be started or the ignition canbe switched on, refer to page 49, when a re‐mote control is inside the vehicle. It is not nec‐essary to insert a remote control into the igni‐tion lock.
Switching off the engine in cars withautomatic transmissionThe engine can only be switched off with theselector lever in position P, refer to page 56.To switch off the engine with the selector leverin position N, the remote control must be in‐serted in the ignition lock.
Before driving a vehicle with automatictransmission into a car wash1. Insert the remote control into the ignition
switch.2. Depress the brake pedal.3. Move the selector lever to position N.4. Switch the engine off.The vehicle can roll.
MalfunctionThe Comfort Access functions can be disturbedby local radio waves, such as by a mobilephone in the immediate vicinity of the remotecontrol or when a mobile phone is beingcharged in the vehicle.If this occurs, open or close the vehicle usingthe buttons on the remote control or use theintegrated key in the door lock.To start the engine afterward, insert the remotecontrol into the ignition switch.
Warning lampsThe warning lamp in the instrumentcluster lights up when you attempt tostart the engine: the engine cannot be
started.The remote control is not in the vehicle or has amalfunction. Take the remote control with youinside the vehicle or have it checked. If neces‐sary, insert another remote control into the ig‐nition switch.
The warning lamp in the instrumentcluster lights up while the engine is run‐ning: the remote control is no longer in‐
side the vehicle.After switching off the engine, the engine canonly be started again within approx. 10 sec‐onds if no door has been opened.
The indicator lamp lights up: replacethe remote control battery.
Seite 31
Opening and closing Controls
31Online Edition for Part no. 01 40 2 911 521 - VI/13
Replacing the batteryThe remote control for Comfort Access containsa battery that will need to be replaced fromtime to time.
1. Remove the cover.
2. Insert a new battery with the positive sidefacing upwards.
3. Press the cover closed.Return used battery to a recycling centeror to your service center.
Alarm systemThe conceptThe enabled alarm system reacts to the follow‐ing:▷ Opening of a door, the hood or the tailgate.▷ Movements inside the vehicle.▷ Changes in the vehicle tilt, e.g., during at‐
tempts to steal a wheel or tow the car.▷ Interruptions in battery voltage.Depending on the market-specific version, thealarm system briefly signals unauthorized entryattempts by:▷ By sounding an acoustic alarm.▷ By switching on the hazard warning system.
Tilt alarm sensorThe tilt of the vehicle is monitored.
The alarm system responds in situations such asattempts to steal a wheel or tow the car.
Interior motion sensorFor the interior motion sensor to function prop‐erly, the windows and the glass sunroof mustbe closed.
Avoiding unintentional alarmsThe tilt alarm sensor and interior motion sensorcan be switched off together, such as in the fol‐lowing situations:▷ In duplex garages.▷ During transport on car-carrying trains, at
sea or on a trailer.▷ When animals are to remain in the vehicle.
Switching off the tilt alarm sensor andinterior motion sensor
▷ Press the button on the remotecontrol twice in succession.
▷ Lock the vehicle twice with the integratedkey.
The LEDs flash in short succession for approx.2 seconds. The tilt alarm sensor and interiormotion sensor remain switched off until the ve‐hicle is unlocked and locked again.
Glass sunroof, electricalGeneral information
Danger of pinchingMonitor the closing process and make
sure that the closing path of the glass sunroof isclear; otherwise, injuries may result.◀
Take the remote control with youTake the remote control with you when
leaving the vehicle so that children, for exam‐ple, cannot operate the roof and injure them‐selves.◀
Seite 32
Controls Opening and closing
32 Online Edition for Part no. 01 40 2 911 521 - VI/13
Convenient operation via:▷ Door lock, refer to page 26▷ Comfort Access, refer to page 30
Tilting the glass sunroofMINI Countryman:▷ Press the switch back to the resistance
point and hold.Both glass sunroofs are raised.Releasing stops the motion.
▷ With the ignition switched on, press theswitch back past the resistance point.Both closed glass sunroofs are raised fully.Pressing again stops the motion.
MINI Paceman:▷ Press the switch back to the resistance
point and hold.The front glass sunroof is raised.Releasing stops the motion.
▷ With the ignition switched on, press theswitch back past the resistance point.The front glass sunroof is fully raised.Pressing again stops the motion.
Opening, closingMINI Countryman:▷ In the raised position with the ignition
switched on, press the switch back andhold.The front glass sunroof is opened. The rearglass sunroof is closed.
Releasing stops the motion.The same method is used to close the glasssunroof, in this case by pressing the switch for‐ward.The front glass sunroof remains in the raisedposition. The rear glass sunroof is raised. Press‐ing again closes both sunroofs completely.MINI Paceman:▷ In the raised position with the ignition
switched on, press the switch back andhold.The front glass sunroof is opened.Releasing stops the motion.
The same method is used to close the glasssunroof, in this case by pressing the switch for‐ward.The front glass sunroof remains in the raisedposition. Pressing again closes the roof com‐pletely.
Roller sunblindThe roller sunblind can be opened and closedseparately from the glass sunroof.
After a power failureAfter a power failure, it could happen that thesunroof can only be raised. In this case, havethe system initialized. The manufacturer of yourMINI recommends having this work performedby the service center.
Power windowsGeneral information
Danger of pinchingMonitor the closing process and make
sure that the closing path of the window isclear; otherwise, injuries may result.◀
Seite 33
Opening and closing Controls
33Online Edition for Part no. 01 40 2 911 521 - VI/13
Take the remote control with youTake the remote control with you when
leaving the vehicle so that children, for exam‐ple, cannot operate the power windows and in‐jure themselves.◀
If, after having been opened and closed a num‐ber of times in close succession, a window canonly be closed, the system is overheated. Letthe system cool down for several minutes withthe ignition switched on or the engine running.
Opening, closing
Front windows
To open:▷ Press the switch to the resistance point. The
window opens while the switch is held.▷ Press the switch beyond the resistance
point. The window opens automatically inthe radio ready state and higher.Press again briefly to stop the opening pro‐cedure.
To close:▷ Pull the switch to the resistance point. The
window closes while the switch is held.▷ Pull the switch beyond the resistance point.
The window closes automatically.Pressing the switch stops the motion.
MINI Countryman: rear windows
To open:▷ Press the switch to the resistance point. The
window opens while the switch is held.▷ Press the switch beyond the resistance
point. The window opens automatically inthe radio ready state and higher.
To close:▷ Pull the switch to the resistance point. The
window closes while the switch is held.▷ Pull the switch beyond the resistance point.
The window closes automatically.Pressing the switch stops the motion.
After the ignition is switched offThe windows can be operated for approx. 1 mi‐nute after the remote control is removed or theignition is switched off.
Take the remote control with youTake the remote control with you when
leaving the vehicle so that children, for exam‐ple, cannot operate the power windows and in‐jure themselves.◀
Pinch protection systemIf the closing force exceeds a specific value as awindow closes, the closing action is inter‐rupted.The window reopens slightly.
Seite 34
Controls Opening and closing
34 Online Edition for Part no. 01 40 2 911 521 - VI/13
Danger of pinching even with pinch pro‐tection
Even with the pinch protection system, checkthat the window's closing path is clear; other‐wise, the closing action may not stop in certainsituations, e.g., if thin objects are present.◀
Do not use window accessoriesDo not install any accessories in the range
of movement of the windows; otherwise, thepinch protection system will be impaired.◀
Closing without the pinch protectionsystem
Danger of pinchingMonitor the closing process and make
sure that the closing path of the window isclear; otherwise, injuries may result.◀
If there is an external danger or, for example, ifice on the windows prevents a window fromclosing normally, the window can be closedmanually.
1. Pull the switch past the resistance point andhold it there. Pinch protection is limited andthe window reopens slightly if the closingforce exceeds a certain value.
2. Pull the switch past the resistance pointagain within approx. 4 seconds and hold itthere.The window closes without pinch protec‐tion.
MINI Countryman: safety switch
With the safety switch, the rear windows areprevented from being opened or closed via theswitches in the rear passenger area, such as bychildren.Press the button. The LED lights up if the safetyfunction is switched on.
Safety switch for rear operationPress the safety switch when transporting
children in the rear; otherwise, injury may resultif the windows are closed without supervi‐sion.◀
Seite 35
Opening and closing Controls
35Online Edition for Part no. 01 40 2 911 521 - VI/13
AdjustingVehicle equipmentThis chapter describes all series equipment aswell as country-specific and special equipmentoffered for this model series.Therefore, it alsodescribes equipment that may not be found inyour vehicle, for instance due to the selectedspecial equipment or the country version. Thisalso applies to safety-related functions and sys‐tems.
Sitting safelyThe ideal seating position can make a vital con‐tribution to relaxed, fatigue-free driving.The seating position plays an important role inan accident in combination with:▷ Safety belts, refer to page 38▷ Head restraints, refer to page 41.▷ Airbags, refer to page 72.
SeatsNote before adjusting
Do not adjust the seat while drivingNever attempt to adjust the driver's seat
while driving. The seat could respond with un‐expected movement and the ensuing loss ofvehicle control could lead to an accident.◀
Do not incline the backrest too far to therear
Do not incline the backrest on the front passen‐ger side too far to the rear during driving. Oth‐erwise, there is the danger of sliding under thesafety belt in an accident. This would eliminatethe protection normally provided by the belt.◀
Front seat adjustment
Forward/backward
Pull the lever, arrow 1, and slide the seat intothe desired position, arrows 2.After releasing the lever, move the seat forwardor back slightly to make sure it engages prop‐erly.
Height
Pull the lever up or push it down repeatedly, ar‐rows 1, until the desired height is reached, ar‐rows .
BackrestMINI Countryman
Seite 36
Controls Adjusting
36 Online Edition for Part no. 01 40 2 911 521 - VI/13
Pull the lever, arrow 1, and apply your weightto the backrest or lift it off, as necessary.
MINI Paceman
Pull the lever, arrow 1, and apply your weightto the backrest or lift it off, as necessary, ar‐rows 2.
Lumbar supportYou can also adjust the contour of the backrestto obtain additional support in the lumbar re‐gion.The upper hips and spinal column receive sup‐plementary support to help you maintain a re‐laxed, upright sitting position.
The graphic shows the MINI Countryman as anexample.Turn the wheel to increase or decrease the cur‐vature.
MINI Countryman: rear seat adjustmentObserve the following when adjustingDo not adjust the rear seats during a trip;
otherwise, there is a risk of passenger injury.Make sure that the locking mechanisms of therear seats engage properly. Otherwise the re‐straining effect of the safety belts during an ac‐cident could be reduced.◀
Forward/backward
Pull the lever and slide the seat into the desiredposition.Release the lever and move the seat slightlyforward or back so that it engages properly.
BackrestAdjust the backrest tilt, refer to page 98.
Seite 37
Adjusting Controls
37Online Edition for Part no. 01 40 2 911 521 - VI/13
MINI Paceman: entry in the rear
1. Pull the lever on the back of the seat up‐ward, arrow 1.The backrest folds forward.
2. Push against the backrest to move the seatforward, arrow 2.
To make it easier to enter the car in the rear,push back the safety belt on the lower beltguide rail if necessary.
Restoring the original seat positionThe driver's seat has a mechanical memoryfunction for the forward/backward seat settingand the backrest setting.
1. Push the seat back to the original position.Do not fold back the backrest until the seatis in its original position; otherwise, the seatwill engage in its current position. If thishappens, adjust the forward/backward po‐sition manually, refer to page 36.
2. Fold back the backrest to lock the seat.Note the following when moving back theseat
When moving back the seat, ensure that per‐sons cannot be injured and objects cannot bedamaged. Lock the front seats and front back‐rests before driving away; otherwise, there isthe risk of an accident if the seat or backrestmoves unexpectedly.◀
Seat heating
Switching onThe temperature setting progresses one stepthrough its control sequence each time youpress the button. The maximum temperature isreached when three LEDs are lit.If the trip is continued within approx. 15 mi‐nutes, the seat heating is activated automati‐cally with the temperature set last.The temperature is reduced, if need be, downto no heat in order to reduce the load on thebattery. The LEDs remain lit.
Switching offPress the button longer.
Safety beltsNumber of safety beltsYour vehicle has been fitted with four or fivesafety belts for the safety of you and your pas‐sengers.However, they can only offer protection whenadjusted correctly.
NotesAlways make sure that safety belts are beingworn by all occupants before driving away.Although airbags enhance safety by providingadded protection, they are not a substitute forsafety belts.
Seite 38
Controls Adjusting
38 Online Edition for Part no. 01 40 2 911 521 - VI/13
The shoulder strap's anchorage point will becorrect for adult seat occupants of every build ifthe seat is correctly adjusted.
One person per safety beltNever allow more than one person to
wear a single safety belt. Never allow infants orsmall children to ride on a passenger's lap.◀
Putting on the beltLay the belt, without twisting, snugly
across the lap and shoulders, as close to thebody as possible. Make sure that the belt lieslow around the hips in the lap area and doesnot press on the abdomen. Otherwise, the beltcan slip over the hips in the lap area in a frontalimpact and injure the abdomen.The safety belt must not lie across the neck, rubon sharp edges, be routed over solid or breaka‐ble objects, or be pinched.◀
Reduction of restraining effectAvoid wearing clothing that prevents the
belt from fitting properly, and pull the shoulderbelt periodically to readjust the tension acrossyour lap; otherwise, the retention effect of thesafety belt may be reduced.◀
Buckling the beltMINI Countryman:
MINI Paceman:
Make sure you hear the latch plate engage inthe belt buckle.The shoulder strap's anchorage point will becorrect for adult seat occupants of every build ifthe seat is correctly adjusted, refer to page 36.
Unbuckling the belt1. Hold the belt firmly.2. Press the red button in the belt buckle.3. Guide the belt back into its reel.
Fastening the rear buckle tonguesWhen the outer rear seats are not occupied, thebuckle tongues of the rear seats can be slid upto the cargo area trim with the clip.This helps avoid annoying noises when driving.
MINI Countryman: center safety belt ofrear seatThe belt buckle embossed with the word CEN‐TER is intended exclusively for use by passen‐gers riding in the center position.If the center safety belt in the rear is used, thebackrests must be locked, refer to page 99.The safety belt will not have a restraining effectif the backrest is not locked.
Belt holder in the headlinerThe holder for the safety belt is located in theheadliner.
Seite 39
Adjusting Controls
39Online Edition for Part no. 01 40 2 911 521 - VI/13
1 Opening for the safety belt2 Holder for the small buckle tongue
Take the small buckle tongue out of the holder.Move both buckle tongues downward.
Closing
Insert the small buckle tongue 2 of the safetybelt into the small belt buckle 3.
OpeningPress the red button on the small belt buckle 3with buckle tongue 1.When the center safety belt is locked:Press the red button 3 with the buckle tongueof the outer left safety belt.
Putting on the belt
1 Large buckle tongue2 Small buckle tongue3 Small belt buckle4 Large belt buckle
Buckle tongue 1 must be inserted in beltbuckle 4. Make sure you hear the buckletongue engage in the belt buckle.Insert the buckle tongue into the belt buckle insuch a way that the belt lies smoothly againstthe body of the buckled person and is nottwisted.
Stowing the center safety beltIf the center seat is not occupied, insert the beltbuckles 3 and 4 into the respective holders, ar‐rows.
Move the buckle tongues to the belt holder onthe headliner, refer to page 39, and insert theminto the provided holders.
Seite 40
Controls Adjusting
40 Online Edition for Part no. 01 40 2 911 521 - VI/13
Safety belt reminder for driver's seatand front passenger seat
The indicator lamps light up and a sig‐nal sounds. Check whether the safetybelt has been fastened correctly.
Damage to safety beltsIn the case of strain caused by accidents ordamage:Have the safety belts, including the safety belttensioners, replaced and have the belt anchorschecked.
Checking and replacing safety beltsHave the work performed only by your
service center; otherwise, it cannot be ensuredthat this safety feature will function properly.◀
Head restraintsCorrectly set head restraintA correctly adjusted head restraint reduces therisk of spinal injury in the event of an accident.
Adjusting the head restraintCorrectly adjust the head restraints of all
occupied seats; otherwise, there is an increasedrisk of injury in an accident.◀
HeightAdjust the head restraint so that its center isapprox. at ear level.
Height adjustment
To raise: pull.To lower: press the button, arrow 1, and pushthe head restraint down.
RemovingOnly remove the head restraint if no one will besitting in the seat in question.
Before transporting passengersReinstall the head restraint before trans‐
porting anyone in the seat; otherwise, the pro‐tective function of the head restraint is unavail‐able.◀
Front1. Pull upward as far as possible.2. Fold the backrest back slightly.3. Press button 1 and pull out the head re‐
straint all the way to the stop.4. MINI Countryman: press the additional but‐
ton 2 using a suitable tool.5. Pull out the head restraint.6. Fold back the backrest.
Seite 41
Adjusting Controls
41Online Edition for Part no. 01 40 2 911 521 - VI/13
Rear1. Pull upward as far as possible.2. Fold the backrest forward slightly.3. Press button 1 and pull out the head re‐
straint all the way to the stop.4. Press the additional button 2 using a suita‐
ble tool.5. Pull out the head restraint completely.6. Fold back the rear seat backrest.
MirrorsExterior mirrors
General informationThe mirror on the passenger side is morecurved than the driver's mirror.
Estimating distances correctlyObjects reflected in the mirror are closer
than they appear. Do not estimate the distanceto the traffic behind you based on what you seein the mirror, as this will increase your risk of anaccident.◀
At a glance
1 Adjusting2 Selecting the left/right mirror3 Folding the mirror in and out
Selecting a mirrorTo change to the other mirror: slide themirror switch over.
Adjusting electricallyThe setting corresponds to the directionin which the button is pressed.
Adjusting manuallyIf an electrical malfunction occurs, for example,press the edges of the mirror glass.
Folding the mirror in and outPress button 3.The mirror can be folded in up to a vehiclespeed of approx. 20 mph/30 km/h.For example, this is advantageous▷ In car washes.▷ In narrow streets.▷ For folding back mirrors that were folded
away manually.Fold in the mirror in a car washBefore entering an automatic car wash,
fold in the exterior mirrors by hand or with thebutton; otherwise, they could be damaged, de‐pending on the width of the vehicle.◀
Automatic heatingBoth exterior mirrors are heated automaticallywhile the engine is running or the ignition isswitched on when the external temperature isbelow a certain value.
Seite 42
Controls Adjusting
42 Online Edition for Part no. 01 40 2 911 521 - VI/13
Interior rearview mirror
To reduce the blinding effect from the rearwhen driving at night: turn the knob.
Interior rearview and exterior mirrors,automatic dimming feature
Two photocells are used for control:▷ In the mirror frame, see arrow.▷ On the back of the mirror.
For proper operation:▷ Keep the photocells clean.▷ Do not cover the area between the inside
rearview mirror and the windshield.▷ Do not apply stickers to the windshield in
front of the mirror.
Steering wheelAdjusting
Do not adjust while drivingDo not adjust the steering wheel while
driving; otherwise, an unexpected movementcould result in an accident.◀
1. Fold the lever down.
2. Move the steering wheel to the preferredheight and angle to suit your seating posi‐tion.
3. Fold the lever back.Do not use force to swing the lever back.Do not use force to swing the lever back
up; otherwise, the mechanism will be dam‐aged.◀
Seite 43
Adjusting Controls
43Online Edition for Part no. 01 40 2 911 521 - VI/13
Transporting children safelyVehicle equipmentThis chapter describes all series equipment aswell as country-specific and special equipmentoffered for this model series.Therefore, it alsodescribes equipment that may not be found inyour vehicle, for instance due to the selectedspecial equipment or the country version. Thisalso applies to safety-related functions and sys‐tems.
The right place for chil‐drenNotes
Children in the vehicleDo not leave children unattended in the
vehicle; otherwise, they could endanger them‐selves and other persons, e.g., by opening thedoors.◀
Children should always be in the rearAccident research shows that the safest placefor children is on the rear seat.
Transporting children in the rearTransport children younger than 13 years
of age or shorter than 5 ft/150 cm in the rearonly, using child restraint fixing systems suita‐ble for the age, weight, and height of the child;otherwise, there is an increased risk of injury inan accident.Children 13 years of age or older must wear asafety belt as soon as a suitable child restraintfixing system can no longer be used, due totheir age, weight and size.◀
Installing child seatsOnly install child seats in the rear when
the rear seat backrest is folded all the way backand engaged; otherwise, there is an increasedrisk of injury in an accident.◀
Children on the front passenger seat
Front passenger airbagsShould it be necessary to use a child restraintfixing system on the front passenger seat,make sure that the front and side airbags onthe front passenger side are deactivated, referto page 73.
Deactivating the front passenger airbagsIf a child restraint fixing system is used in
the front passenger seat, the front passengerairbags must be deactivated; otherwise, thereis an increased risk of injury to the child whenthe airbags are triggered, even with a child re‐straint fixing system.◀
Installing child re‐straint fixing systemsBefore mountingMINI Countryman: before mounting a child re‐straint fixing system on the rear seats, movethe seats into the rearmost positions.Adjust the inclination of the center backrest tothat of the respective outer backrest.After mounting the child restraint fixing systemon the respective outer rear seat, adjust thebackrest forward, if necessary, to ensure thatthe backrest is in contact with the child re‐straint fixing system. Rear seat backrests, referto page 98.
Seite 44
Controls Transporting children safely
44 Online Edition for Part no. 01 40 2 911 521 - VI/13
NotesManufacturer's information for child re‐straint fixing systems
To select, mount and use child restraint fixingsystems, observe the information provided bythe system manufacturer; otherwise, the pro‐tective effect can be impaired.◀
On the front passenger seat
Deactivating the airbagsAfter installing a child restraint fixing system onthe front passenger seat, ensure that the front,side, and knee airbags on the front passengerside are deactivated.
Deactivating the front passenger airbagsIf a child restraint fixing system is used in
the front passenger seat, the front passengerairbags must be deactivated; otherwise, thereis an increased risk of injury to the child whenthe airbags are triggered, even with a child re‐straint fixing system.◀
Seat position and heightBefore installing a child restraint fixing system,move the front passenger seat as far back aspossible and adjust its height to the highest po‐sition to obtain the best possible position forthe belt and to offer optimal protection in theevent of an accident.Do not change this seat position once it hasbeen set.
Child seat security
The graphic shows the MINI Countryman as anexample.The rear safety belts and the safety belt for thefront passenger can be locked to prevent ex‐tension in order to permit attachment of childrestraint fixing systems.
To lock the safety belt1. Secure the child restraint fixing system with
the belt.2. Pull out the belt webbing completely.3. Allow the belt webbing to be pulled in and
pull it taut against the child restraint fixingsystem.
The safety belt is locked.
To unlock the safety belt1. Open the belt buckle.2. Remove the child restraint fixing system.3. Allow the belt webbing to be pulled in com‐
pletely.Center safety belt: unlock belt buckle 3 inaddition, refer to page 40.Guide the safety belt to the holder on theheadliner.
LATCH child restraint fix‐ing systemLATCH: Lower Anchors and Tethers for Children.
Seite 45
Transporting children safely Controls
45Online Edition for Part no. 01 40 2 911 521 - VI/13
NotesManufacturer's information for LATCHchild restraint fixing systems
To mount and use the LATCH child restraint fix‐ing systems, observe the operating and safetyinformation from the system manufacturer;otherwise, the level of protection may be re‐duced.◀
Mounts for the lower LATCH anchorsThe lower anchors may be used to attach theCRS to the vehicle seat up to a combined childand CRS weight of 65 lb/30 kg when the child isrestrained by the internal harnesses.
Correctly engage the lower LATCH an‐chors
Make sure that the lower LATCH anchors haveproperly engaged and that the child restraintfixing system is resting snugly against the back‐rest; otherwise, the degree of protection of‐fered may be reduced.◀
Before installing the child seat, pull the belt outof the area for the child restraint fixing system.
MINI Countryman
The mounts for the lower LATCH anchors arelocated at the points indicated by the arrows.
MINI Paceman
The mounts for the lower LATCH anchors arelocated at the points indicated by the arrows.
Mounting LATCH child restraint fixingsystems1. Mount the child restraint fixing system; re‐
fer to the operating instructions of the sys‐tem.
2. Ensure that both LATCH anchors are prop‐erly connected.
Child restraint fixingsystems with an upper re‐taining strapMounting points
LATCH mounting eyesOnly use the mounting eyes for the upper
LATCH retaining strap to secure child restraintfixing systems; otherwise, the mounting eyescould be damaged.◀
There are two additional mounting points forchild restraint fixing systems with an upper re‐taining strap, arrows.
Seite 46
Controls Transporting children safely
46 Online Edition for Part no. 01 40 2 911 521 - VI/13
MINI Countryman
There are two additional mounting points forchild restraint fixing systems with an upper re‐taining strap, arrows.
MINI Paceman
There are two additional mounting points forchild restraint fixing systems with an upper re‐taining strap, arrows.
Guide of the upper LATCH retainingstrap
Retaining strapMake sure the upper retaining strap does
not run over sharp edges and is not twisted asit passes to the top anchor. Otherwise, thestrap will not properly secure the child restraintfixing system in the event of an accident.◀
Outer seats:
1 Direction of travel2 Head restraint3 Cargo area floor4 Hook for upper retaining strap5 Mounting point6 Backrest7 Upper retaining strap of child restraint fix‐
ing system
MINI Countryman, center seat
1 Direction of travel2 Head restraint3 Hook for upper retaining strap4 Mounting point5 Cargo area floor6 Backrest7 Upper retaining strap of child restraint fix‐
ing system
Seite 47
Transporting children safely Controls
47Online Edition for Part no. 01 40 2 911 521 - VI/13
Attaching the upper retaining strap tothe mounting point1. Slide the head restraint upward.2. Center seat: fold the cargo area floor for‐
ward.3. Guide the upper retaining strap between
the supports of the head restraint.4. Attach the upper retaining strap to the
mounting point with the hook.5. Slide the head restraint into the bottom po‐
sition.6. Pull the upper retaining strap taut.
MINI Countryman: lock‐ing doors and windowsRear doors
Push the locking lever on the rear doors down.The door can now be opened from the outsideonly.
Safety switch for power windowThis locks the rear window switches so that thewindows cannot be operated from the rear.Press the safety switch, refer to page 35.
Seite 48
Controls Transporting children safely
48 Online Edition for Part no. 01 40 2 911 521 - VI/13
DrivingVehicle equipmentThis chapter describes all series equipment aswell as country-specific and special equipmentoffered for this model series.Therefore, it alsodescribes equipment that may not be found inyour vehicle, for instance due to the selectedspecial equipment or the country version. Thisalso applies to safety-related functions and sys‐tems.
Ignition lockInsert the remote control into theignition lock
Insert the remote control all the way into theignition lock.
Radio ready state is switched on. Individualelectrical consumers can operate.
Removing the remote control from theignition lock
Do not forcibly pull the remote controlout of the ignition lock
Do not forcibly pull the remote control out ofthe ignition lock as this may cause damage.◀
Before removing the remote control, push it allthe way in to release the locking mechanism.The ignition is switched off if it was on.
Automatic transmissionYou can only take out the remote control iftransmission position P is engaged: interlock.
Start/Stop button
Pressing the Start/Stop button switches the ig‐nition on or off and starts the engine.
The engine starts when the Start/Stop button ispressed and:▷ Manual transmission: the clutch is de‐
pressed.▷ Automatic transmission: the brake is de‐
pressed.
Radio ready stateIndividual electrical consumers can operate.Radio ready state is switched off automatically:▷ When the remote control is removed from
the ignition lock.▷ With Comfort Access, refer to page 30, by
pressing the button on the door handle or
the button on the remote control.▷ After a certain period of time.
Ignition onAll electrical consumers can operate. Most indi‐cator and warning lamps light up for differentlengths of time.
Seite 49
Driving Controls
49Online Edition for Part no. 01 40 2 911 521 - VI/13
To save battery power when the engine is off,switch off the ignition and any unnecessaryelectronic systems/power consumers.
Radio ready state and ignition offAll indicator and warning lamps in the displaysgo out.The ignition switches off automatically whenthe driver's door is opened. Pressing the Start/Stop button again switches the ignition backon.For example, the ignition is not switched off inthe following situations:▷ Depress the clutch or brake pedal.▷ The low beams are switched on
Starting the engineGeneral information
Enclosed areasDo not let the engine run in enclosed
areas; otherwise, breathing of exhaust fumesmay lead to loss of consciousness and death.The exhaust gases contain carbon monoxide,an odorless and colorless but highly toxic gas.◀
Unattended vehicleDo not leave the car unattended with the
engine running; otherwise, it presents a poten‐tial source of danger.Before leaving the car with the engine running,shift to neutral or engage transmission posi‐tion P and set the handbrake firmly; otherwise,the vehicle may begin to roll.◀
Frequent starting in quick successionAvoid repeated futile attempts at starting
the car and avoid starting the car frequently inquick succession. Otherwise, the fuel is notburned or is inadequately burned, and there isthe danger of overheating and damaging thecatalytic converter.◀
Do not wait for the engine to warm-up whilethe vehicle remains stationary; start drivingright away, but at moderate engine speeds.Do not depress the accelerator when startingthe engine.
Starting the engine
Manual transmissionRemote control in the ignition lock or, withComfort Access, inside the vehicle, refer topage 30.
1. Depress the brake pedal.2. Depress the clutch pedal.3. Press the Start/Stop button.The ignition is activated automatically for a cer‐tain time and is stopped as soon as the enginestarts.
Automatic transmissionRemote control in the ignition lock or, withComfort Access, inside the vehicle, refer topage 30.
1. Depress the brake pedal.2. Move the selector lever to position P or N.3. Press the Start/Stop button.The ignition is activated automatically for a cer‐tain time and is stopped as soon as the enginestarts.
Seite 50
Controls Driving
50 Online Edition for Part no. 01 40 2 911 521 - VI/13
Engine stopGeneral information
Take the remote control with youTake the remote control with you when
leaving the vehicle so that children, for exam‐ple, cannot operate the windows and injurethemselves.◀
Set the handbrake and further secure thevehicle as required
Set the handbrake firmly when parking; other‐wise, the vehicle may roll. On steep upwardand downward inclines, further secure the ve‐hicle, for example, by turning the steeringwheel in the direction of the curb.◀
Before driving into a car washTo make it possible for the vehicle to roll in anautomatic car wash, follow the information onWashing in automatic car washes, refer topage 186.
Switching off the engine
Manual transmission1. With the vehicle at a standstill, press the
Start/Stop button.2. Shift into first gear or reverse.3. Set the handbrake firmly.4. Remove the remote control from the igni‐
tion lock.
Automatic transmission1. Engage transmission position P with the ve‐
hicle stopped.2. Press the Start/Stop button.3. Set the handbrake firmly.4. Remove the remote control from the igni‐
tion lock.
HandbrakeThe conceptThe handbrake is primarily intended to preventthe vehicle from rolling while parked; it brakesthe rear wheels.Also follow the instructions under Switching offthe engine, refer to page 51.
SettingThe lever engages automatically.
Releasing
Pull up slightly, press the button, and lower thelever.
NotesUsing the handbrake while drivingIf it should become necessary to use the
handbrake while driving, do not pull the hand‐brake too forcefully. Keep the button on thehandbrake lever pressed at all times.Excessive application of the handbrake canblock the rear wheels and lead to fishtailing ofthe vehicle.◀
The brake lamps do not light up when thehandbrake is pulled.
Seite 51
Driving Controls
51Online Edition for Part no. 01 40 2 911 521 - VI/13
Turn signal, high beams,headlamp flasher
1 Turn signal2 Switching on the high beams3 Switching off the high beams/headlamp
flasher
Turn signalPress the lever beyond the resistance point.To switch off manually, press the lever to theresistance point.Unusually rapid flashing of the indicator lampindicates that a turn signal bulb has failed.
Signaling a turn brieflyPress the lever to the resistance point and holdit there for as long as you want the turn signalto flash.
Triple turn signal activationPress the lever to the resistance point.The turn signal flashes three times.
This function can be activated or deactivated:
1. Switch on the ignition, refer to page 49.2. Press the button on the turn indicator lever
repeatedly until "SET/INFO" is displayed.
3. Press and hold the button until the displaychanges.
4. Press the button repeatedly until the sym‐bol and "SET" are displayed.
5. Press and hold the button until the displaychanges.
6. Press the button repeatedly until the sym‐bol shown is displayed, arrow.
7. Press and hold the button until the displaychanges.
8. Press the button to select:
Seite 52
Controls Driving
52 Online Edition for Part no. 01 40 2 911 521 - VI/13
▷ Turn signal flashes once.
▷ Triple turn signal.
9. Press and hold the button until the displaychanges.
The setting is stored for the remote control cur‐rently in use.
Washer/wiper systemNotes
Do not switch on the wipers if frozenDo not switch on the wipers if they are
frozen onto the windshield; otherwise, thewiper blades and the windshield wiper motormay be damaged.◀
Do not use the wipers on a dry windshieldDo not use the wipers on a dry wind‐
shield; otherwise, the wiper blades may wearmore rapidly or become damaged.◀
At a glance
1 Switching on wipers2 Switching off wipers or brief wipe3 Activating/deactivating intermittent wipe or
the rain sensor4 Cleaning the windshield and headlamps
Switching on wipersPress the wiper lever upward, arrow 1.The lever automatically returns to its initial po‐sition when released.
Normal wiper speedPress up once.The system switches to operation in the inter‐mittent mode when the vehicle is stationary.
Fast wiper speedPress up twice or press once beyond the resist‐ance point.The system switches to normal speed when thevehicle is stationary.
Switching off wipers or brief wipePress the wiper lever down, arrow 2.The lever automatically returns to its initial po‐sition when released.▷ Brief wipe: press down once.▷ To switch off normal wipe: press down
once.▷ To switch off fast wipe: press down twice.
Intermittent wipe or rain sensorIf the car is not equipped with a rain sensor, theintermittent-wipe time is a preset.If the car is equipped with a rain sensor, thetime between wipes is controlled automaticallyand depends on the intensity of the rainfall.The rain sensor is mounted on the windshield,directly in front of the interior rearview mirror.
Deactivate the rain sensor in car washesDeactivate the rain sensor when passing
through an automatic car wash; otherwise,damage could be caused by undesired wiperactivation.◀
Seite 53
Driving Controls
53Online Edition for Part no. 01 40 2 911 521 - VI/13
Activating intermittent wipe or rainsensorPress the button, arrow 3.
The symbol is shown in the tachometer.
Setting the sensitivity of the rain sensor1. Switch on the ignition, refer to page 49.2. Press the button on the turn indicator lever
repeatedly until "SET/INFO" is displayed.
3. Press and hold the button until the displaychanges.
4. Press the button repeatedly until the sym‐bol and "SET" are displayed.
5. Press and hold the button until the displaychanges.
6. Press the button to select the desired sensi‐tivity.
7. Wait or hold the button until the displaychanges.The settings were stored.
Deactivating intermittent wipe or rainsensorPress the button again, arrow 3.
Cleaning the windshield and headlampsPull the lever, arrow 4.The system sprays washer fluid on the wind‐shield and activates the wipers briefly.When the vehicle lighting system is switchedon, the headlamps are cleaned at regular andappropriate intervals.
Do not use the washer system at freezingtemperatures
Do not use the washers if there is any dangerthat the fluid will freeze on the windshield; oth‐erwise, your vision could be obscured. For thisreason, use antifreeze.Avoid using the washer when the reservoir isempty; otherwise, you could damage thepump.◀
Seite 54
Controls Driving
54 Online Edition for Part no. 01 40 2 911 521 - VI/13
Do not use the washing facilities whenthe hood is open
Only use the washing facilities when the hoodis fully locked; otherwise, the headlamp washersystem may become damaged.◀
Windshield washer nozzlesThe windshield washer nozzles are heated au‐tomatically while the engine is running or theignition is switched on.
Rear window wiper
0 Resting position1 Switching on intermittent wipe
Turn the cap to level 1.When reverse gear is engaged, the systemswitches to continuous operation.
2 Cleaning the rear window with intermittentwipeTurn the cap further to level 2 and hold.
3 Cleaning the rear window in the resting po‐sitionTurn the cap to level 3 and hold.
The rear window wiper does not move if thecap is in position 1 before the ignition isswitched on.To switch on the rear window wiper:
1. Move the cap to its basic position.2. Select the required position again.
Do not use the washing mechanismswhen the washer fluid reservoir is empty
Do not use washing mechanisms when thewasher fluid reservoir is empty, otherwise youwill damage the washer pump.◀
Washer fluidGeneral information
Antifreeze for washer fluidAntifreeze is flammable and can cause in‐
juries if used improperly.Therefore, keep it away from sources of igni‐tion.Only keep it in the closed original container andinaccessible to children.Follow the notes and instructions on the con‐tainer.United States: The washer fluid mixture ratio isregulated by the U.S. EPA and many individualstates; do not exceed the allowable washerfluid dilution ratios limits that apply. Follow theusage instructions on the washer fluid con‐tainer. Use BMW's Windshield Washer Concen‐trate or the equivalent.◀
Washer fluid reservoirAdding washer fluidOnly add washer fluid when the engine is
cool, and then close the cover completely toavoid contact between the washer fluid andhot engine parts.Otherwise, there is the danger of fire and a riskto personal safety if the fluid is spilled.◀
Seite 55
Driving Controls
55Online Edition for Part no. 01 40 2 911 521 - VI/13
All washer nozzles are supplied from one reser‐voir.
The recommended minimum filling quantity is0.2 US gal/1 liter.Fill with a mixture of window washing concen‐trate and water; if needed, add antifreeze ac‐cording to the manufacturer instructions.Mix the washer fluid before adding to maintainthe correct mixing ratio.Do not fill in undiluted window washing con‐centrate and do not fill in pure water; this coulddamage the washer system.Do not mix window washing concentrate fromdifferent manufacturers; this could cause thewasher nozzles to clog.
Manual transmission
Pay attention to the shift planeWhen shifting into 5th or 6th gear, push
the gearshift lever to the right; otherwise inad‐vertent shifting into the 3rd or 4th gear couldlead to engine damage.◀
Reverse gearSelect only when the vehicle is stationary. Whenthe gearshift lever is pressed to the left, a slightresistance needs to be overcome.
Automatic transmissionwith SteptronicIn addition to the fully automatic mode, gearscan also be shifted manually using Steptronic,refer to page 57.
Parking the vehicleSecure the vehicleBefore leaving the vehicle with the en‐
gine running, move the selector lever to posi‐tion P and set the handbrake; otherwise, thevehicle will begin moving.◀
Disengaging the remote controlTo remove the remote control from the ignitionlock, first move the selector lever to position Pand switch off the engine: interlock. Removethe remote control from the ignition lock, referto page 49.
Selector lever positionsP R N D M/S + –
Displays in the tachometer
The selector lever position is displayed and theengaged gear, such as M4, is displayed inmanual mode.
Seite 56
Controls Driving
56 Online Edition for Part no. 01 40 2 911 521 - VI/13
Changing selector lever positions▷ With the ignition switched on or the engine
running, the selector lever can be movedout of position P.
▷ When the vehicle is stationary, step on thebrake before shifting out of P or N; other‐wise, the selector lever is locked: shiftlock.
Press on the brake pedal until youstart driving
To prevent the vehicle from creeping afteryou select a driving position, maintain pres‐sure on the brake pedal until you are readyto start.◀
A lock prevents accidental shifting into selectorlever positions R and P.To override the lock, press the button on thefront of the selector lever, see arrow.
P ParkSelect only when the vehicle is stationary. Thefront wheels are blocked.
R is ReverseSelect only when the vehicle is stationary.
N is NeutralFor example, engage this position in a carwash. The vehicle can roll.
D Drive, automatic positionPosition for normal vehicle operation. All for‐ward gears are selected automatically.
Under normal operating conditions, fuel con‐sumption is lowest when you are driving in po‐sition D.
KickdownKickdown is used to achieve maximum drivingperformance. Press on the accelerator beyondthe resistance point at the full throttle position.
Sport program and manual mode M/S
Activating the Sport program
Move the selector lever from position D towardthe left into the M/S shifting slot.
The Sport program is activated and DS is dis‐played. This position is recommended for a per‐formance-oriented driving style.To deactivate the Sport program or manualmode M/S, move the selector lever to the rightinto position D.
Activating the M/S manual modeMove the selector lever from position D towardthe left into the M/S shifting slot.Push the selector lever forward or backward.Manual mode becomes active and the gear ischanged.The tachometer displays the engaged gear,e. g. M1.▷ To shift up: press the selector lever back‐
ward.▷ To shift down: press the selector lever for‐
ward.
Seite 57
Driving Controls
57Online Edition for Part no. 01 40 2 911 521 - VI/13
The vehicle only shifts up or down at appropri‐ate engine and road speeds, e.g., it does notshift down if the engine speed is too high. Theselected gear is briefly displayed in the instru‐ment panel, followed by the current gear.
Shifting gears using the shift paddleson the steering wheelThe shift paddles on the steering wheel allowyou to shift gears quickly while keeping bothhands on the steering wheel.▷ When the shift paddles on the steering
wheel are used to shift gears while in auto‐matic mode, the transmission switches tomanual mode.
▷ If the shift paddles are not used to acceler‐ate or shift gears for a certain amount oftime, the transmission switches back to au‐tomatic mode.
If the selector lever is in the M/S gear plane,manual mode remains active.
▷ Pull one of the two shift paddles:The transmission shifts up.
▷ Press one of the two shift paddles:The transmission shifts down.
The vehicle only shifts up or down at appropri‐ate engine and road speeds, e.g., it does notshift down if the engine speed is too high. Theselected gear is briefly displayed in the instru‐ment panel, followed by the current gear.
Manually unlocking the selector leverlockIf the selector lever is locked in position P al‐though the ignition is switched on, the brake isdepressed, and the button on the selector leveris pressed, the selector lever lock can be over‐ridden:
1. Switch off the ignition.2. Unclip the sleeve of the selector lever.3. Pull the sleeve up over the selector lever
until the sleeve is inside out.Pull off the plug-in cable connector if nec‐essary.
4. Insert the pulling hook 1 into the loop onthe passenger side.The pulling hook is found in the vehicledocument portfolio or in the pouch of thewheel change set, refer to page 177.
5. Pull the loop upward.6. Move the selector lever into the desired po‐
sition, pressing the button on the front ofthe selector lever.
Set the handbrakeBefore manually unlocking the selector
lever lock, pull the handbrake firmly; otherwise,the vehicle may roll away and cause personalinjury or property damage.◀
Seite 58
Controls Driving
58 Online Edition for Part no. 01 40 2 911 521 - VI/13
DisplaysVehicle equipmentThis chapter describes all series equipment aswell as country-specific and special equipmentoffered for this model series.Therefore, it alsodescribes equipment that may not be found inyour vehicle, for instance due to the selectedspecial equipment or the country version. Thisalso applies to safety-related functions and sys‐tems.
Odometer, external tem‐perature display, clockAt a glance
1 Current speed2 Odometer, trip odometer, external temper‐
ature, time3 Resetting the trip odometer
Press the button on the turn indicator lever toopen information in display area 2.The following information is displayed consecu‐tively:▷ Trip odometer▷ Time▷ External temperature
Trip odometerTo display the trip odometer: briefly pressknob 3.To reset the trip odometer: press knob 3 whilethe trip odometer is being displayed and the ig‐nition is switched on.
TimeSet the time, refer to page 63.
External temperature, externaltemperature warningIf the display drops to +37 ℉/+3 ℃, a signalsounds and a warning lamp lights up. There isthe increased danger of ice.
Ice on roadsEven at temperatures above
+37 ℉/+3 ℃, there can be a risk of ice onroads.Therefore, drive carefully on bridges and shadyroads, for example, to avoid the increased dan‐ger of an accident.◀
Units of measureTo set the respective units of measure, miles orkm for the odometer and ℃ or ℉ for the exter‐nal temperature, refer to page 62.
Seite 59
Displays Controls
59Online Edition for Part no. 01 40 2 911 521 - VI/13
Tachometer
It is imperative that you avoid engine speeds inthe red warning field. In this range, the fuelsupply is interrupted to protect the engine.
Coolant temperatureA warning lamp will come on if the coolant, andtherefore the engine, becomes too hot.Check the coolant level, refer to page 168.
Fuel gauge
The arrow next to the fuel pump symbol on thefuel gauge indicates the side of the vehicle withthe fuel filler flap.The vehicle inclination may cause the display tovary.
Notes on refueling, refer to page 148.Filling capacities, refer to page 207.
RangeAfter the reserve range is reached:
▷ The remaining LEDs change from orange tored, arrow.
▷ The remaining range is shown on the tach‐ometer.
▷ When a dynamic driving style is used, suchas when corners are taken rapidly, enginefunctions are not ensured.
A warning lamp lights up below a range of ap‐prox. 30 miles/50 km.
Refuel promptlyAt the latest, refuel at a range below
30 miles/50 km; otherwise, the engine functionis not ensured and damage may occur.◀
ComputerOpening information in the tachometer
Press the button on the turn indicator lever.
Overview of the informationThe following information is displayed consecu‐tively by repeatedly pressing the button on theturn indicator lever:▷ Range.▷ Average fuel consumption.▷ Current fuel consumption.▷ Average speed.To set the corresponding units of measure, re‐fer to page 62.
Seite 60
Controls Displays
60 Online Edition for Part no. 01 40 2 911 521 - VI/13
Information in detail
RangeDisplays the estimated cruising range availablewith the remaining fuel.It is calculated based on your driving style overthe last 18 miles/30 km.
Average fuel consumptionThis is calculated for the period during whichthe engine is running.To reset the average consumption: press thebutton on the turn indicator lever for ap‐prox. 2 seconds.
Current fuel consumptionDisplays the current fuel consumption. You cancheck whether you are currently driving in anefficient and environmentally-friendly manner.
Average speedPeriods in which the vehicle was parked andthe engine was switched off manually are notincluded in the average speed calculations.To reset the average speed: press the buttonon the turn indicator lever for approx. 2 sec‐onds.
Radio MINI Boost CD: displays on theradioSome computer functions can also be shownon the radio display, refer to page 125.
Settings and informationOperating conceptSome settings and information can only be cre‐ated or opened while the ignition is switchedon, the vehicle is standing, and the doors areclosed.
1 Button for:▷ Selecting the display.▷ Setting values.▷ Confirming the selected display or set
values.▷ Calling up computer information 60.
Symbol Function
Set the rain sensor, refer topage 53.
Open Check-Control, refer topage 65.
View service requirement dis‐play, refer to page 64
Initialize the Flat Tire Monitor,refer to page 75.Resetting the Tire PressureMonitor, refer to page 78.
Set the formats and units ofmeasure, reset to the factorysettings, refer to page 62.
Seite 61
Displays Controls
61Online Edition for Part no. 01 40 2 911 521 - VI/13
Symbol Function
Personal Profile settings, referto page 22.
Exit the menu.
Exiting displays
1. Press the button on the turn indicator leverrepeatedly until "HOME" is displayed.
2. Hold the button down.The current speed is displayed again.Displays are also exited if no entries are madewithin approx. 8 seconds.
Next setting or information
1. Within a setting or information display,press the button on the turn indicator leverrepeatedly until "NEXT" is displayed.
2. Hold the button down.Direct change to the next setting or piece of in‐formation.
Formats and units ofmeasureThe formats and units of measure can be set.The settings are stored for the remote controlin use.
1. Switch on the ignition, refer to page 49.2. Press the button on the turn indicator lever
repeatedly until "SET/INFO" is displayed.
3. Press and hold the button until the displaychanges.
4. Press the button repeatedly until the sym‐bol and "SET" are displayed.
5. Press and hold the button until the displaychanges.
6. Press the button repeatedly until the sym‐bol shown is displayed, arrow.▷ Fuel consumption: l/100 km, mpg,
km/l
Seite 62
Controls Displays
62 Online Edition for Part no. 01 40 2 911 521 - VI/13
▷ Distance: km, mi.▷ Temperature: ℃, ℉
7. Press and hold the button until the displaychanges.
8. Press the button to change the format orthe unit of measure.
9. Press and hold the button until the displaychanges.The settings are stored.
Resetting to factory settingsThe settings for formats and units of measurecan be reset to the factory settings. The settingsare stored for the remote control in use.
1. Press the button on the turn indicator leverrepeatedly until "SET/INFO" is displayed.
2. Press and hold the button until the displaychanges.
3. Press the button repeatedly until the sym‐bol and "SET" are displayed.
4. Press and hold the button until the displaychanges.
5. Press the button repeatedly until "RESET"appears on the display.
6. Press and hold the button until the displaychanges to the first setting option.The settings are reset.
ClockSetting the timeRadio MINI Boost CD: setting the time, refer topage 124.
DateSetting the dateRadio MINI Boost CD: set the date, refer topage 124.
Seite 63
Displays Controls
63Online Edition for Part no. 01 40 2 911 521 - VI/13
Service requirements
The remaining driving distance and the date ofthe next scheduled service are displayed brieflyimmediately after you start the engine orswitch on the ignition.
The current service requirements can be readout from the remote control by the service spe‐cialist.
Displaying the vehicle checkFor certain maintenance operations, you canview the distance remaining or the due date forthat operation in the tachometer.
1. Switch on the ignition, refer to page 49.2. Press the button on the turn indicator lever
repeatedly until "SET/INFO" is displayed.
3. Press and hold the button until the displaychanges.
4. Press the button repeatedly until the corre‐sponding symbol and "SERVICE-INFO" aredisplayed.
5. Press and hold the button until the displaychanges.
6. Press the button to display the individualservice requirement items.
Possible displays
1 Button for selecting the information.
Symbol Function
Service requirements
Engine oil
Seite 64
Controls Displays
64 Online Edition for Part no. 01 40 2 911 521 - VI/13
Symbol Function
Roadworthiness test
Front brake pads
Rear brake pads
Brake fluid
Exit the display, refer topage 62
Next setting or information, re‐fer to page 62
Check ControlThe conceptThe Check Control monitors vehicle functionsand alerts you to any malfunctions in the sys‐tems being monitored.A Check Control message consists of indicatorand warning lamps in the instrument clusterand, in some circumstances, an acoustic signal.
Indicator/warning lamps
The indicator and warning lamps can light up ina variety of combinations and colors in displayarea 1 or 2.
Several of the lamps are checked for properfunctioning and light up temporarily when theengine is started or the ignition is switched on.
The symbol indicates that Check Controlmessages have been stored. The Check Controlmessages can be displayed later.
What to do in case of a malfunctionThe meaning of each lamp in the event of amalfunction and tips on how to respond areprovided in the list, refer to page 190.
Seite 65
Displays Controls
65Online Edition for Part no. 01 40 2 911 521 - VI/13
Hiding Check Control messages
Press the button on the turn indicator lever.
Some Check Control messages are displayedcontinuously and are not cleared until the mal‐function is eliminated. If several malfunctionsoccur at once, the messages are displayed con‐secutively.Other Check Control messages are hidden au‐tomatically after approx. 20 seconds. However,they are stored and can be displayed againlater.
Viewing stored Check Control messagesThe stored Check Control messages can only bedisplayed while the driver's door is closed.
1. Press the button on the turn indicator leverrepeatedly until "SET/INFO" is displayed.
2. Press and hold the button until the displaychanges.
3. Press the button repeatedly until the corre‐sponding symbol and "CHECK INFO" ap‐pear on the display.
4. Press and hold the button.If there is no Check Control message, this isindicated by "CHECK OK“.If a Check Control message has beenstored, the corresponding message is dis‐played.
5. Press the button to check for other mes‐sages.
Seite 66
Controls Displays
66 Online Edition for Part no. 01 40 2 911 521 - VI/13
LampsVehicle equipmentThis chapter describes all series equipment aswell as country-specific and special equipmentoffered for this model series.Therefore, it alsodescribes equipment that may not be found inyour vehicle, for instance due to the selectedspecial equipment or the country version. Thisalso applies to safety-related functions and sys‐tems.
At a glance
0 Lamps off / daytime running lights1 Parking lamps and daytime running lights2 Low-beam headlamps and welcome lamps3 Automatic headlamp control, Adaptive
Light Control, daytime running lights, andwelcome lamps
Parking lamps/lowbeams, headlamp con‐trolGeneral informationWhen the driver's door is opened with the igni‐tion switched off, the exterior lighting is auto‐matically switched off when the light switch isin position 0, 2, or 3.
Switch on the parking lamps if necessary,switch position 1.
Parking lampsSwitch position 1: the vehicle lamps light up onall sides.Do not use the parking lamps for extended pe‐riods; otherwise, the battery may become dis‐charged and it would then be impossible tostart the engine.When parking, it is preferable to switch on theone-sided roadside parking lamps, refer topage 68.
Low beamsSwitch position 2: the low beams are lit whenthe ignition is switched on.
Automatic headlamp controlSwitch position 3: the low beams are switchedon and off automatically depending on the am‐bient light, e.g., in tunnels, in twilight, or ifthere is precipitation. Adaptive Light Control isactive.A blue sky with the sun low on the horizon cancause the lights to be switched on.The low beams remain switched on independ‐ent of the ambient lighting conditions whenyou switch on the front fog lamps.
Personal responsibilityThe automatic headlamp control cannot
serve as a substitute for your personal judg‐ment in determining when the lamps should beswitched on in response to ambient lightingconditions.For example, the sensors are unable to detectfog or hazy weather. To avoid safety risks, youshould always switch on the lamps manuallyunder these conditions.◀
Seite 67
Lamps Controls
67Online Edition for Part no. 01 40 2 911 521 - VI/13
When the daytime running lights are activated,the low beams are always switched on inswitch position 3 when the ignition is switchedon.The exterior lighting goes out automatically af‐ter the vehicle is switched off.
High beams/roadside parking lamps
1 Turn signal/roadside parking lamp2 Switching on the high beams3 Switching off the high beams/headlamp
flasher
To assist in parking, the vehicle can be illumi‐nated on one side; note the country-specificregulations.The roadside parking lamps drain the battery.Therefore, do not leave them on for undulylong periods of time; otherwise, the batterymight not have enough power to start the en‐gine.
Switching on the roadside parking lampTo switch on the roadside parking lamp on theleft or right, press the turn indicator lever up ordown after switching off the vehicle, arrow 1.
Switching off the roadside parking lampPress the lever up or down to the resistancepoint.
Daytime running lightsThe daytime running lights light up in switchposition 0, 1, or 3 when the ignition is switchedon.
The exterior lighting goes out automatically af‐ter the vehicle is switched off.In switch position 1, the parking lamps light upafter the ignition is switched off.
Activating/deactivating1. Switch on the ignition, refer to page 49.2. Press the button on the turn indicator lever
repeatedly until "SET/INFO" is displayed.
3. Press and hold the button until the displaychanges.
4. Press the button repeatedly until the sym‐bol and "SET" are displayed.
5. Press and hold the button until the displaychanges.
Seite 68
Controls Lamps
68 Online Edition for Part no. 01 40 2 911 521 - VI/13
6. Press the button repeatedly until the sym‐bol shown is displayed, arrow.
7. Press and hold the button until the displaychanges.
8. Press the button to select:▷
Daytime running lights are activated.▷
Daytime running lights are deactivated.9. Hold the button down.The setting is stored for the remote control cur‐rently in use.
Welcome lampsIf the light switch stays in switch position 2 or 3after the vehicle is switched off, the parkinglamps and the interior lamps light up for a cer‐tain period when the vehicle is unlocked.
Headlamp courtesy delay featureThe low beams stay lit for a short while afterthe ignition is switched off, if the lamps areswitched off and the headlamp flasher isswitched on.
Setting the duration1. Switch on the ignition.2. Press the button on the turn indicator lever
repeatedly until "SET/INFO" is displayed.3. Press and hold the button until the display
changes.
4. Press the button repeatedly until the sym‐bol and "SET" are displayed.
5. Press and hold the button until the displaychanges.
6. Press the button repeatedly until the sym‐bol shown is displayed, arrow.
7. Press and hold the button until the displaychanges.
8. Press the button to select:▷
The function is deactivated.▷ ...
Select the duration, e.g. 40 seconds.9. Hold the button down.The setting is stored for the remote control cur‐rently in use.
Adaptive Light ControlThe conceptAdaptive Light Control is a variable headlampcontrol system that enables dynamic illumina‐tion of the road surface.
Seite 69
Lamps Controls
69Online Edition for Part no. 01 40 2 911 521 - VI/13
Depending on the steering angle and other pa‐rameters, the light from the headlamp followsthe course of the road.
ActivatingWith the ignition switch on, turn the light switchto position 3, refer to page 67.To avoid blinding oncoming traffic, the Adap‐tive Light Control does not swivel to the driver'sside when the vehicle is at a standstill.When driving in reverse, Adaptive Light Controlis not active.
MalfunctionThe warning lamp lights up. AdaptiveLight Control is malfunctioning or hasfailed. Have the system checked as
soon as possible.More information, refer to page 190.
Fog lampsAt a glance
To switch on the front fog lamps: press theswitch.To switch off, press the respective switch up‐ward or downward again.
Fog lampsThe parking lamps or low beams must beswitched on. The green indicator lamp lights upwhen the front fog lamps are switched on.
Depending on the vehicle equipment, the frontfog lamps are switched off when the headlampflasher or the high beams are activated.If the automatic headlamp control is activated,refer to page 67, the low beams are switchedon automatically when the front fog lamps areswitched on.
Instrument lightingThe parking lamps or low beams must beswitched on to adjust the brightness. Thebrightness is increased to a certain limit and isthen reduced again.
▷ Press the button briefly: the brightnesschanges in stages.
▷ Press and hold the button: the brightnesschanges continuously.
Interior lampsThe interior lamps, the footwell lamps and thecargo area lamp are controlled automatically.To avoid draining the battery, all lamps insidethe vehicle are switched off some time after theignition is switched off.
Seite 70
Controls Lamps
70 Online Edition for Part no. 01 40 2 911 521 - VI/13
Switching interior lamps on/offmanually
To switch the interior lamps on/off: press theswitch.
If the interior lamps are to remain switched off,press the switch for approx. 3 seconds.
Reading lampsReading lamps are located in the front next tothe interior lamp and in the rear.
Switching the reading lamps on/offFront: press the switch.Rear: press the button.
Ambient lightingThe color and brightness of the ambient light‐ing can be changed.
Press the switch forward: the color changes insteps.Press the switch back: the brightness changesin steps.
Intermediate settings and intermediate colorsare possible.For continuously changing colors of the ambi‐ent lighting, press the switch forward for morethan 10 seconds.
Seite 71
Lamps Controls
71Online Edition for Part no. 01 40 2 911 521 - VI/13
SafetyVehicle equipmentThis chapter describes all series equipment aswell as country-specific and special equipmentoffered for this model series.Therefore, it alsodescribes equipment that may not be found inyour vehicle, for instance due to the selectedspecial equipment or the country version. This
also applies to safety-related functions and sys‐tems.
AirbagsThe graphic shows the MINI Paceman as an ex‐ample.
1 Front airbags2 Knee airbag
3 Side airbag4 Head airbags
Front airbagsFront airbags help protect the driver and frontpassenger by responding to frontal impacts inwhich safety belts alone cannot provide ade‐quate restraint.
Side airbagsIn a lateral impact, the side airbag supports theside of the body in the chest and lap area.
Head airbagsIn a lateral impact, the head airbag supportsthe head.
Knee airbagThe knee airbag supports the legs in a frontalimpact.
Seite 72
Controls Safety
72 Online Edition for Part no. 01 40 2 911 521 - VI/13
Protective actionAirbags are not triggered in every impact situa‐tion, e.g., in less severe accidents or rear-endcollisions.
Information on how to ensure the opti‐mal protective effect of the airbags
▷ Keep at a distance from the airbags.▷ Always grasp the steering wheel on the
steering wheel rim, holding your hands atthe 3 o'clock and 9 o'clock positions, tokeep the danger of injury to your hands orarms as low as possible if the airbag is trig‐gered.
▷ There should be no people, animals, or ob‐jects between an airbag and a person.
▷ Do not use the cover of the front airbag onthe front passenger side as a storage area.
▷ Keep the dashboard and window on thefront passenger side clear, i.e., do not coverwith adhesive labels or coverings, and donot attach holders such as for navigation in‐struments and mobile phones.
▷ Make sure that the front passenger is sittingcorrectly, i.e., keeps his or her feet and legsin the footwell; otherwise, leg injuries canoccur if the front airbag is triggered.
▷ Do not place slip covers, seat cushions orother objects on the front passenger seatthat are not approved specifically for seatswith integrated side airbags.
▷ Do not hang pieces of clothing, such asjackets, over the backrests.
▷ Make sure that occupants keep their headsaway from the side airbag and do not restagainst the head airbag; otherwise, injuriescan occur if the airbags are triggered.
▷ Do not remove the airbag restraint system.▷ Do not remove the steering wheel.▷ Do not apply adhesive materials to the air‐
bag cover panels, cover them or modifythem in any way.
▷ Never modify either the individual compo‐nents or the wiring in the airbag system.This also applies to steering wheel covers,the dashboard, the seats, the roof pillarsand the sides of the headliner.◀
Even when all instructions are followed closely,injury from contact with the airbags cannot beruled out in certain situations.The ignition and inflation noise may lead toshort-term and, in most cases, temporary hear‐ing impairment in sensitive individuals.
In the case of a malfunction, deactivationand after triggering of the airbags
Do not touch the individual components imme‐diately after the system has been triggered;otherwise, there is the danger of burns.Only have the airbags checked, repaired or dis‐mantled and the airbag generator scrapped byyour service center or a workshop that has thenecessary authorization for handling explo‐sives.Non-professional attempts to service the sys‐tem could lead to failure in an emergency orundesired triggering of the airbag, either ofwhich could result in injury.◀
Warning notices and information about the air‐bags can also be found on the sun visors.
Automatic deactivation of the frontpassenger airbagsThe system determines whether the front pas‐senger seat is occupied by measuring the elec‐trical resistance of the human body.The front, side, and knee airbags on the frontpassenger side are activated or deactivated ac‐cordingly by the system.The indicator lamp above the interior rearviewmirror, refer to page 74, shows the currentstatus of the front passenger airbags, deacti‐vated or activated.
Seite 73
Safety Controls
73Online Edition for Part no. 01 40 2 911 521 - VI/13
Leave feet in the footwellMake sure that the front passenger keeps
his or her feet in the footwell; otherwise, thefront passenger airbags may not function prop‐erly.◀
Child restraint fixing system in the frontpassenger seat
Before transporting a child on the front passen‐ger seat, read the safety and operating instruc‐tions under Transporting children safely, referto page 44.◀
Malfunction of the automaticdeactivation systemWhen transporting older children and adults,the front passenger airbags may be deactivatedin certain sitting positions. In this case, the indi‐cator lamp for the front passenger airbagslights up.In this case, change the sitting position so thatthe front passenger airbags are activated andthe indicator lamp goes out.If it is not possible to activate the airbags, havethe person sit in the rear.To make sure that occupation of the seat cush‐ion can be detected correctly:▷ Do not attach seat covers, seat cushion
padding, ball mats, or other items to thefront passenger seat unless they are specifi‐cally recommended by the manufacturer ofyour MINI.
▷ Do not place electronic devices on the pas‐senger seat if a child restraint fixing systemis mounted on the seat.
▷ Do not place objects under the seat thatcould press against the seat from below.
Indicator lamp for the front passengerairbags
The indicator lamp for the front passenger air‐bags indicates the operating state of the frontpassenger airbags.The lamp indicates whether the airbags are ac‐tivated or deactivated.
▷ The indicator lamp lights upwhen a child who is properlyseated in a child restraint fix‐ing system intended for thatpurpose is detected on theseat or the seat is empty. Theairbags on the front passen‐ger side are not activated.
▷ The indicator lamp does not light up when,for example, a correctly seated person ofsufficient size is detected on the seat. Theairbags on the front passenger side are ac‐tivated.
Most child seats are detected by the system,Especially the child seats required by NHTSA atthe time that the vehicle was manufactured.After installing a child seat, make sure that theindicator lamp for the front passenger airbagslights up. This indicates that the child seat hasbeen detected and the front passenger airbagsare not activated.
Seite 74
Controls Safety
74 Online Edition for Part no. 01 40 2 911 521 - VI/13
Operational readiness of airbag system
In the radio ready state and beyond, re‐fer to page 49, the warning lamp lightsup briefly to indicate that the entire air‐
bag system and the belt tensioners are opera‐tional.
Airbag system malfunction▷ Warning lamp does not light up in the radio
ready state.▷ Warning lamp remains permanently on.
Have the airbag system checked withoutdelay if there is a malfunction
In the event of a malfunction in the airbag sys‐tem, have it checked without delay; otherwise,there is the risk that the system will not func‐tion as intended even if a sufficiently severe ac‐cident occurs.◀
FTM Flat Tire MonitorThe conceptThe system does not measure the actual infla‐tion pressure in the tires.The system detects a pressure loss in a tire bycomparing the rotational speeds of the individ‐ual wheels while moving.In the event of a pressure loss, the diameterand therefore the rotational speed of the corre‐sponding wheel change. This is detected andreported as a flat tire.
Functional requirementsThe system must have been initialized whenthe tire inflation pressure was correct; other‐wise, reliable signaling of a flat tire is not en‐sured.Initialize the system after each correction of thetire inflation pressure and after every tire orwheel change.
System limitsSudden tire damageSudden serious tire damage caused by
external influences cannot be indicated in ad‐vance.◀
A natural, even pressure loss in all four tirescannot be detected. Therefore, check the tireinflation pressure regularly.The system could be delayed or malfunction inthe following situations:▷ When the system has not been initialized.▷ When driving on a snowy or slippery road
surface.▷ Sporty driving style: slip in the drive wheels,
high lateral acceleration.▷ When driving with snow chains.
InitializationThe initialization process adopts the set infla‐tion tire pressures as reference values for thedetection of a flat tire. Initialization is started byconfirming the inflation pressures.
Seite 75
Safety Controls
75Online Edition for Part no. 01 40 2 911 521 - VI/13
Do not initialize the system when driving withsnow chains.
1. Start the engine, but do not start driving.2. Press the button on the turn indicator lever
repeatedly until "SET/INFO" is displayed.
3. Press and hold the button until the displaychanges.
4. Press the button repeatedly until the corre‐sponding symbol and "RESET" are dis‐played.
5. Press and hold the button until the displaychanges.
6. Drive away.Initialization is completed while the car istraveling without feedback being given.
Indication of a flat tireThe warning lamps come on in yellowand red. In addition, a signal sounds.
There is a flat tire or a major loss in tire inflationpressure.
1. Reduce your speed and stop cautiously.Avoid sudden braking and steering maneu‐vers.
2. Check whether the vehicle is fitted withregular tires or run-flat tires.Run-flat tires, refer to page 160, are la‐beled with a circular symbol containing theletters RSC marked on the tire sidewall.
Do not continue driving without run-flattires
Do not continue driving if the vehicle is notequipped with run-flat tires; continued drivingmay result in serious accidents.◀
When a flat tire is indicated, DSC Dynamic Sta‐bility Control is switched on if necessary.
Actions in the event of a flat tire
Normal tires1. Identify the damaged tire.
Do this by checking the inflation pressure inall four tires.The tire pressure gauge of the Mobility Sys‐tem, refer to page 161, can be used for thispurpose.If the tire inflation pressure in all four tires iscorrect, the Flat Tire Monitor may not havebeen initialized. In this case, initialize thesystem.If an identification is not possible, pleasecontact the service center.
2. Rectify the flat tire using the Mobility Sys‐tem, refer to page 161.
Run-flat tiresYou can continue driving with a damaged tireat speeds up to 50 mph/80 km/h.
Seite 76
Controls Safety
76 Online Edition for Part no. 01 40 2 911 521 - VI/13
Continued driving with a flat tireIf continuing to drive with a damaged tire:
1. Avoid sudden braking and steering maneu‐vers.
2. Do not exceed a speed of 50 mph/80 km/h.3. At the next opportunity, check the inflation
pressure in all four tires.If the tire inflation pressure in all four tires iscorrect, the Flat Tire Monitor may not havebeen initialized. In this case, initialize thesystem.
Possible driving distance with complete loss oftire inflation pressure:The possible driving distance after a loss of tireinflation pressure depends on the cargo loadand the driving style and conditions.For a vehicle containing an average load, thepossible driving distance is ap‐prox. 50 miles/80 km.When the vehicle is driven with a damaged tire,its handling characteristics change, e.g., re‐duced lane stability during braking, a longerbraking distance, and altered self-steeringproperties. Adjust your driving style accord‐ingly. Avoid abrupt steering maneuvers or driv‐ing over obstacles, e. g., curbs, potholes, etc.Because the possible driving distance dependson how the vehicle is used during the trip, theactual distance may be smaller or greater de‐pending on the driving speed, road conditions,external temperature, cargo load, etc.
Continued driving with a flat tireDrive moderately and do not exceed a
speed of 50 mph/80 km/h.A loss of tire inflation pressure results in achange in the handling characteristics, e.g., re‐duced lane stability during braking, a longerbraking distance and altered self-steering prop‐erties.◀
Final tire failureVibrations or loud noises while driving
can indicate the final failure of the tire. Reducespeed and stop; otherwise, pieces of the tirecould come loose and cause an accident. Donot continue driving, and contact your servicecenter.◀
Tire Pressure MonitorTPMThe conceptThe tire inflation pressure is measured in thefour mounted tires. The system notifies you ifthere is a significant loss of pressure in one ormore tires.
Functional requirementsThe system must have been reset while the in‐flation pressure was correct; otherwise, reliablesignaling of a flat tire is not ensured.Always use wheels with TPM electronics to en‐sure that the system will operate properly.Reset the system after each correction of thetire inflation pressure and after every tire orwheel change.
System limitsSudden tire damageSudden serious tire damage caused by
external influences cannot be indicated in ad‐vance.◀
The system does not operate correctly if it hasnot been reset. For example, a flat tire may beindicated despite correct tire inflation pres‐sures.The system is inactive and cannot indicate a flattire:▷ For a mounted wheel without TPM elec‐
tronics.
Seite 77
Safety Controls
77Online Edition for Part no. 01 40 2 911 521 - VI/13
▷ When the TPM is disturbed by other sys‐tems or devices with the same radio fre‐quency.
Resetting the systemReset the system after each correction of thetire inflation pressure and after every tire orwheel change.
1. Start the engine, but do not start driving.2. Press the button on the turn indicator lever
repeatedly until "SET/INFO" is displayed.
3. Press and hold the button until the displaychanges.
4. Press the button repeatedly until the sym‐bol for the Tire Pressure Monitor and "AC‐TIVE" are displayed. The Tire Pressure Mon‐itor can be reset with "RESET".
5. Press and hold the button until "RESET‐TING" is displayed.
6. Drive away.After driving a few minutes, the set inflationpressures in the tires are accepted as thetarget values to be monitored. The systemreset is completed during your drive, andcan be interrupted at any time. When driv‐ing resumes, the reset is continued auto‐matically. The indicator lamp goes out afterthe system reset is completed.
Low tire pressure messageThe warning lamps come on in yellowand red. In addition, a signal sounds.
▷ There is a flat tire or substantial loss of infla‐tion pressure on the indicated wheel.
▷ The system was not reset after a wheelchange and thus issues warnings based onthe inflation pressures initialized last.
1. Reduce your speed and stop cautiously.Avoid sudden braking and steering maneu‐vers.
2. Check whether the vehicle is fitted withregular tires or run-flat tires.Run-flat tires, refer to page 160, are la‐beled with a circular symbol containing theletters RSC marked on the tire sidewall.
Seite 78
Controls Safety
78 Online Edition for Part no. 01 40 2 911 521 - VI/13
Do not continue driving without run-flattires
Do not continue driving if the vehicle is notequipped with run-flat tires; continued drivingmay result in serious accidents.◀
When a low inflation pressure is indicated, DSCDynamic Stability Control is switched on if nec‐essary.
Actions in the event of a flat tire
Normal tires1. Identify the damaged tire.
Do this by checking the air pressure in allfour tires. The tire pressure gauge of theMobility System, refer to page 161, can beused for this purpose.If the tire inflation pressure in all four tires iscorrect, the Tire Pressure Monitor may nothave been reset. Reset the system.If an identification is not possible, pleasecontact the service center.
2. Rectify the flat tire using the Mobility Sys‐tem, refer to page 161.Use of tire sealant, e.g., the Mobility Sys‐tem, may damage the TPM wheel electron‐ics. In this case, have the electronicschecked at the next opportunity and havethem replaced if necessary.
Run-flat tiresYou can continue driving with a damaged tireat speeds up to 50 mph/80 km/h.
Do not continue driving without run-flattires
Do not continue driving if the vehicle is notequipped with run-flat tires; continued drivingmay result in serious accidents.◀
Continued driving with a flat tireIf continuing to drive with a damaged tire:
1. Avoid sudden braking and steering maneu‐vers.
2. Do not exceed a speed of 50 mph/80 km/h.3. Check the air pressure in all four tires at the
next opportunity.If the tire inflation pressure in all four tires iscorrect, the Tire Pressure Monitor may nothave been reset. Reset the system.
Possible driving distance with complete loss oftire inflation pressure:The possible driving distance after a loss of tireinflation pressure depends on the cargo loadand the driving style and conditions.For a vehicle containing an average load, thepossible driving distance is ap‐prox. 50 miles/80 km.When the vehicle is driven with a damaged tire,its handling characteristics change, e.g., re‐duced lane stability during braking, a longerbraking distance, and altered self-steeringproperties. Adjust your driving style accord‐ingly. Avoid abrupt steering maneuvers or driv‐ing over obstacles, e. g., curbs, potholes, etc.Because the possible driving distance dependson how the vehicle is used during the trip, theactual distance may be smaller or greater de‐pending on the driving speed, road conditions,external temperature, cargo load, etc.
Continued driving with a flat tireDrive moderately and do not exceed a
speed of 50 mph/80 km/h.A loss of tire inflation pressure results in achange in the handling characteristics, e.g., re‐duced lane stability during braking, a longerbraking distance and altered self-steering prop‐erties.◀
Seite 79
Safety Controls
79Online Edition for Part no. 01 40 2 911 521 - VI/13
Final tire failureVibrations or loud noises while driving
can indicate the final failure of the tire. Reducespeed and stop; otherwise, pieces of the tirecould come loose and cause an accident. Donot continue driving, and contact your servicecenter.◀
MalfunctionThe small warning lamp flashes in yel‐low and then lights up continuously; thelarger warning lamp comes on in yel‐low.
No flat tire can be detected.Display in the following situations:▷ A wheel without TPM electronics is
mounted:Have the system checked by the servicecenter if necessary.
▷ Malfunction:Have the system checked.
▷ TPM could not be fully reset; reset the sys‐tem again.
The small warning lamp flashes in yel‐low and then lights up continuously; thelarger warning lamp comes on in yel‐low.
No flat tire can be detected.Display in the following situation:▷ Disturbance by other systems or devices
with the same radio frequencyAfter leaving the area of the disturbance,the system automatically becomes activeagain.
Declaration according to NHTSA/FMVSS138 Tire Pressure Monitoring SystemsEach tire, including the spare (if provided)should be checked monthly when cold and in‐flated to the inflation pressure recommendedby the vehicle manufacturer on the vehicle
placard or tire inflation pressure label (If yourvehicle has tires of a different size than the sizeindicated on the vehicle placard or tire inflationpressure label, you should determine theproper tire inflation pressure for those tires.).As an added safety feature, your vehicle hasbeen equipped with a tire pressure monitoringsystem (TPMS) that illuminates a low tire pres‐sure telltale when one or more of your tires issignificantly under-inflated. Accordingly, whenthe low tire pressure telltale illuminates, youshould stop and check your tires as soon aspossible, and inflate them to the proper pres‐sure. Driving on a significantly under-inflatedtire causes the tire to overheat and can lead totire failure. Under-inflation also reduces fuel ef‐ficiency and tire tread life, and may affect thevehicle's handling and stopping ability.Please note that the TPMS is not a substitute forproper tire maintenance, and it is the driver'sresponsibility to maintain correct tire pressure,even if under-inflation has not reached thelevel to trigger illumination of the TPMS low tirepressure telltale.Your vehicle has also been equipped with aTPMS malfunction indicator to indicate whenthe system is not operating properly. The TPMSmalfunction indicator is combined with the lowtire pressure telltale. When the system detectsa malfunction, the telltale will flash for approxi‐mately one minute and then remain continu‐ously illuminated. This sequence will continueupon subsequent vehicle startups as long asthe malfunction exists. When the malfunctionindicator is illuminated, the system may not beable to detect or signal low tire pressure as in‐tended. TPMS malfunctions may occur for a va‐riety of reasons, including the installation of re‐placement or alternate tires or wheels on thevehicle that prevent the TPMS from functioningproperly. Always check the TPMS malfunctiontelltale after replacing one or more tires orwheels on your vehicle to ensure that the re‐placement or alternate tires and wheels allowthe TPMS to continue to function properly.
Seite 80
Controls Safety
80 Online Edition for Part no. 01 40 2 911 521 - VI/13
Driving stability control systemsVehicle equipmentThis chapter describes all series equipment aswell as country-specific and special equipmentoffered for this model series.Therefore, it alsodescribes equipment that may not be found inyour vehicle, for instance due to the selectedspecial equipment or the country version. Thisalso applies to safety-related functions and sys‐tems.
Antilock Brake SystemABSABS prevents locking of the wheels duringbraking.Steerability is maintained even during full brak‐ing. This increases active driving safety.ABS is operational every time you start the en‐gine.
Electronic brake-force distribution EBVThe system controls the brake pressure in therear wheels to ensure stable braking behavior.
CBC Cornering Brake ControlWhen braking in curves or during a lanechange, driving stability and steering responseare improved further.
Brake assistantWhen the brakes are applied rapidly, this sys‐tem automatically produces the maximumbraking force boost. In this way, the systemhelps keep the braking distance as short aspossible. This system utilizes all of the benefitsprovided by ABS.
Do not reduce the pressure on the brake pedalfor the duration of full braking.
Dynamic Stability Con‐trol DSCThe conceptDSC prevents traction loss in the driving wheelswhen driving away and accelerating.DSC also recognizes unstable vehicle condi‐tions, such as fishtailing or nose-diving. Subjectto physical limits, DSC helps to keep the vehicleon a steady course by reducing engine speedand by applying brakes to the individualwheels.DSC is operational every time you start the en‐gine.
Adjust your driving style to the situationAn appropriate driving style is always the
responsibility of the driver.The laws of physics cannot be repealed, evenwith DSC.Do not reduce the additional safety marginwith a risky driving style, as otherwise there is arisk of an accident.◀
Deactivating DSC
Press the switch until the DSC OFF indicatorlamp lights up in the speedometer and DSC OFF
Seite 81
Driving stability control systems Controls
81Online Edition for Part no. 01 40 2 911 521 - VI/13
appears in the tachometer. DSC is deactivated.Intervening measures to stabilize the vehicleand give it forward momentum are no longerexecuted.
When driving with snow chains or to rock thevehicle free of snow, it may be useful to deacti‐vate DSC temporarily.To increase vehicle stability, activate DSC againas soon as possible.
Activating DSCPress the switch again; the DSC indicator lampsin the display elements go out.
Indicator/warning lampsThe indicator lamp in the tachometerflashes: DSC is controlling the driveforces and brake forces.
The indicator lamp lights up: DSC and DTC hasfailed.
The indicator lamp in the speedometerlights up and DSC OFF appears in thetachometer.
DSC and DTC deactivated.
Dynamic Traction Con‐trol DTCThe conceptThe DTC system is a version of the DSC in whichforward momentum is optimized.
The system ensures maximum forward mo‐mentum on special road conditions, e.g., unp‐lowed snowy roads, but driving stability is lim‐ited.It is therefore necessary to drive with appropri‐ate caution.You may find it useful to briefly activate DTCunder the following special circumstances:▷ When driving in sand, on snowy inclines, in
slush, or on unplowed, snow-covered roadsurfaces
▷ When rocking a vehicle free or starting offin deep snow, sand, or on loose ground
▷ When driving with snow chains.
Activating DTC
Press the switch; the DSC OFF indicator lamplights up in the speedometer and TRACTIONappears in the tachometer. Dynamic StabilityControl DSC is deactivated, Dynamic TractionControl DTC is activated.
Deactivating DTCPress the switch again; the DSC OFF indicatorlamp in the speedometer and TRACTION in thetachometer go out.
Indicator/warning lampsThe indicator lamp in the tachometerflashes: DTC is controlling the driveforces and brake forces.
The indicator lamp lights up: DSC and DTC hasfailed.
Seite 82
Controls Driving stability control systems
82 Online Edition for Part no. 01 40 2 911 521 - VI/13
The indicator lamp in the speedometerlights up and TRACTION appears in thetachometer.
DTC is activated.
Hill drive-off assistantThis system supports driving away on gradients.The handbrake is not required.
1. Hold the vehicle in place with the footbrake.
2. Release the foot brake and drive awaywithout delay.
Driving off without delayAfter releasing the foot brake, start driv‐
ing without delay, since the drive-off assistantwill not hold the vehicle in place for more thanapprox. 2 seconds and the vehicle will beginrolling back.◀
ALL4 all-wheel systemALL4 is the all-wheel system of your MINI. Thecombined effects of ALL4 and DSC further opti‐mize the traction and dynamic driving charac‐teristics. The ALL4 all-wheel system variablydistributes the drive forces to the front and rearaxles depending on the driving situation andprevailing road conditions.
Sport buttonWhen this button is pressed, the vehicle re‐sponds in an even sportier manner.▷ The engine responds more spontaneously
to accelerator movements.▷ The steering responds more directly.▷ Cooper S, John Cooper Works: the engine
sounds sportier when coasting.▷ For automatic transmissions: more rapid
gear changes in the Sport program.
Activating the system
Press the switch; the LED in the button lights upand SPORT is displayed briefly in the tachome‐ter.
Deactivating the system▷ Press the switch again.▷ Switch the engine off.
Seite 83
Driving stability control systems Controls
83Online Edition for Part no. 01 40 2 911 521 - VI/13
Driving comfortVehicle equipmentThis chapter describes all series equipment aswell as country-specific and special equipmentoffered for this model series.Therefore, it alsodescribes equipment that may not be found inyour vehicle, for instance due to the selectedspecial equipment or the country version. Thisalso applies to safety-related functions and sys‐tems.
Cruise controlThe conceptThe system is functional at speeds beginning atapprox. 20 mph/30 km/h.The vehicle stores and maintains the speedspecified using the controls on the steeringwheel.
Do not use cruise controlDo not use the system if unfavorable con‐
ditions make it impossible to drive at a constantspeed, for instance:▷ On curvy roads.▷ In heavy traffic.▷ On slippery roads, in fog, snow or rain, or
on a loose road surface.Otherwise, you could lose control of the vehicleand cause an accident.◀
Controls
At a glance
1 Maintaining, storing, and increasing thespeed
2 Activating/deactivating cruise control3 Maintaining, storing, and reducing the
speed4 Resuming cruise control
Switching onPress button 2.
The indicator lamp lights up in thespeedometer. Cruise control is ready tooperate and can be activated.
Switching offPress button 2.▷ When activated: press twice.▷ When interrupted: press once.The displays go out. The stored target speed iscleared.
InterruptingPress button 2.The system is interrupted automatically if▷ The brakes are applied.▷ The clutch pedal is depressed.
Seite 84
Controls Driving comfort
84 Online Edition for Part no. 01 40 2 911 521 - VI/13
▷ The transmission position D is disengaged.▷ DSC intervenes.
Maintaining, storing the current speedPress button 1 or button 3.The current speed is maintained and stored. Itis displayed briefly in the tachometer.On downhill gradients, it may prove impossibleto maintain the set speed if the engine brakingpower is insufficient. On uphill gradients, it mayprove impossible to maintain the set speed ifthe engine power output is insufficient.
Increasing speed▷ Press button 1 repeatedly until the desired
speed is reached.Each time the button is pressed, the speedincreases by approx. 1 mph/1 km/h.
▷ Press and hold button 1 until the desiredspeed is reached.The vehicle accelerates without pressure onthe accelerator pedal. After the button isreleased, the achieved speed is maintainedand stored.
Decreasing speedPress button 3 repeatedly or hold it until thedesired speed is reached.The functions are the same those when thespeed is increased, only that the speed is re‐duced.
Resuming a speed stored beforehandPress button 4.The last stored speed is resumed and main‐tained.The stored speed is cleared when the ignition isswitched off.
Display in the tachometer
The selected speed is displayed briefly.
If the display --- mph or --- km/h appearsbriefly, conditions may not be adequate to op‐erate the system.
For better controlThe indicator lamp lights up in thespeedometer. Cruise control is ready tooperate and can be activated.
MalfunctionThe warning lamp in the tachometerlights up. The system is malfunctioningor has failed.
Park Distance ControlPDCThe conceptPDC provides support when parking in reverse.Signal tones indicate that the vehicle is ap‐proaching an object behind it. Measurementsare made by four ultrasound sensors in thebumpers.The range of these sensors is approx. 6 ft/2 m.An acoustic warning is first given:▷ By the two corner sensors at ap‐
prox. 24 in/60 cm.▷ By the rear middle sensors at approx.
5 ft/1.50 m.
Seite 85
Driving comfort Controls
85Online Edition for Part no. 01 40 2 911 521 - VI/13
Avoid driving quickly with PDCPDC is a parking aid that can display ob‐
jects when the vehicle approaches them slowly,as is the case during parking maneuvers. Avoiddriving toward an object quickly as the systemmay then be too late in issuing a warning fortechnical reasons.◀
Automatic operationThe system is activated after approx. one sec‐ond when reverse gear or selector lever posi‐tion R is engaged while the engine is running orthe ignition is switched on. Await this short pe‐riod before setting the vehicle into motion.
Signal tonesThe closer the vehicle is to the object, theshorter the intervals become. If the distance toa detected object is less than approx.12 in/30 cm, a continuous tone is sounded.If the distance remains constant, for examplewhen driving parallel to a wall, the signal toneis stopped after approx. 3 seconds.
VolumeThe signal tone volume can be adjusted.Radio MINI Boost CD, refer to page 124.
System limitsCheck the traffic situation as wellPDC cannot serve as a substitute for the
driver's personal judgment of the traffic situa‐tion. Check the traffic situation around the ve‐hicle with your own eyes. Otherwise, an acci‐dent could result from road users or objectslocated outside of the PDC detection range.Loud noises from outside and inside the vehiclemay prevent you from hearing the PDC's signaltone.◀
MalfunctionThe warning lamp lights up. PDC is mal‐functioning or has failed. Have the sys‐tem checked.
To ensure full functionality of the sensors, keepthe sensors clean and free of ice. When usinghigh-pressure washers, do not spray the sen‐sors for long periods and maintain a distance ofat least 12 in/30 cm.
Seite 86
Controls Driving comfort
86 Online Edition for Part no. 01 40 2 911 521 - VI/13
ClimateVehicle equipmentThis chapter describes all series equipment aswell as country-specific and special equipmentoffered for this model series.Therefore, it also
describes equipment that may not be found inyour vehicle, for instance due to the selectedspecial equipment or the country version. Thisalso applies to safety-related functions and sys‐tems.
Air conditioning
1 Air volume2 Cooling function3 Recirculated air mode4 Temperature
5 Rear window defroster6 Vent settings7 Windshield heating
Air volumeVary the air volume. The higherthe rate, the more effective theheating or cooling will be.The air flow rate may be reducedor the blower may be switched
off entirely to save on battery power.
Switching the system on/offTurn the rotary switch for the air volume to 0.The blower and air conditioner are completelyswitched off and the air supply is cut off.Set any air volume to switch on the air condi‐tioning.
Seite 87
Climate Controls
87Online Edition for Part no. 01 40 2 911 521 - VI/13
Cooling functionThe passenger compartment canonly be cooled with the enginerunning.The cooling function cools anddehumidifies the incoming air
before reheating it as required, according tothe temperature setting.The cooling function helps to prevent conden‐sation on the windows or to remove it quickly.
Depending on the weather, the windshield mayfog up briefly when the engine is started.To cool the air faster and more intensivelywhen external temperatures are high, switchon the recirculated air mode.
Recirculated air modeIf the air outside the car has anunpleasant odor or contains pol‐lutants, shut off the supply to theinterior of the car temporarily.The system then recirculates the
air currently within the vehicle.
Should the windows fog up in the recirculated-air mode, press the AUTO button or switch offthe recirculated-air mode and increase the airvolume if necessary. Make sure that air canflow onto the windshield.Recirculated air mode is automatically deacti‐vated at low external temperatures.
Only use recirculated air mode for a lim‐ited period
The recirculated air mode should not be usedcontinuously for lengthy periods; otherwise, thequality of the air inside the car will graduallydeteriorate.◀
TemperatureTurn upward, red, to raise thetemperature.Turn downward, blue, to lowerthe temperature.
Rear window defrosterThe rear window defrosterswitches off automatically after acertain period of time.The rear window defrosterpower may be lowered or even
switched off entirely to save on battery power.
Vent settingsDirect the flow of air to the win‐dows , to the upper bodyarea , or to the footwell .Intermediate positions are possi‐ble.
Windshield heatingThe windshield heating switchesoff automatically after sometime.The windshield heating may bereduced or even switched off en‐
tirely to save on battery power.
Defrosting and defogging windows1. Set the maximum air volume.2. Air distribution in position .
By switching on the cooling function, thewindows are defogged more rapidly.
3. Set the highest temperature, red.4. Deactivate recirculated air mode.5. Switch on the windshield heating if neces‐
sary.6. Switch on the rear window defroster if nec‐
essary.
Seite 88
Controls Climate
88 Online Edition for Part no. 01 40 2 911 521 - VI/13
MicrofilterThe microfilter traps dust and pollen. The mi‐crofilter is changed by the service center duringroutine maintenance work.
Microfilter/activated-charcoal filterThe microfilter traps dust and pollen. The acti‐vated-charcoal filter provides additional protec‐
tion by filtering gaseous pollutants from theoutside air. The service center replaces thiscombined filter during routine maintenance.
Automatic climate control
1 Air volume, manual2 AUTO program3 Recirculated air mode4 Maximum cooling5 Manual air distribution6 Temperature
7 Defrosting windows and removing conden‐sation
8 Cooling function9 Rear window defroster10 Windshield heating
Comfortable interior climateThe AUTO program offers the optimum air dis‐tribution and air volume for virtually all condi‐tions, refer to AUTO program below. Select acomfortable interior temperature only.
The following sections contain more detailedinformation on the available setting options.Most of these settings are stored for the remotecontrol in use, Personal Profile settings, refer topage 23.
Seite 89
Climate Controls
89Online Edition for Part no. 01 40 2 911 521 - VI/13
Air volume, manualPress the – button to reduce theair volume. Press the + button toincrease the air volume.The automatic mode for the airvolume can be switched on
again using the AUTO button.
The air flow rate may be reduced or the blowermay be switched off entirely to save on batterypower. The display remains the same.
Switching the system on/offReduce the air volume by pressing the – buttonuntil the system is switched off. All displays goout.Press the AUTO button to switch the automaticclimate control back on.
AUTO programThe AUTO program automati‐cally adjusts the air distributionto the windshield and side win‐dows, toward the upper bodyarea, and into the footwell. The
air volume and your specifications for the tem‐perature are adjusted to outside influences dueto the seasons, e. g., solar radiation.The cooling function is switched on automati‐cally with the AUTO program.The program is switched off if the air distribu‐tion is manually adjusted or the button ispressed again.
Recirculated air modeIf the air outside the car has anunpleasant odor or contains pol‐lutants, shut off the supply to theinterior of the car temporarily.The system then recirculates the
air currently within the vehicle.
Should the windows fog up in the recirculated-air mode, press the AUTO button or switch off
the recirculated-air mode and increase the airvolume if necessary. Make sure that air canflow onto the windshield.Recirculated air mode is automatically deacti‐vated at low external temperatures.
Only use recirculated air mode for a lim‐ited period
The recirculated air mode should not be usedcontinuously for lengthy periods; otherwise, thequality of the air inside the car will graduallydeteriorate.◀
Maximum coolingAutomatic climate controlswitches to the lowest tempera‐ture, a high air volume, and re‐circulated air mode.For maximum cooling, open the
vents for the upper body area.
The air is cooled as quickly as possible:▷ At an external temperature above
32 ℉/0 ℃.▷ When the engine is running.
Manual air distributionThe flow of air is directed, as se‐lected, to the windows, to theupper body area, or to the foot‐well.The automatic mode for the air
distribution can be switched back on using theAUTO button.
TemperatureSet the desired temperature in‐dividually.The automatic climate controlachieves this temperature asquickly as possible regardless of
the season, using maximum cooling or heatingpower if necessary, and then maintains it.
Seite 90
Controls Climate
90 Online Edition for Part no. 01 40 2 911 521 - VI/13
When switching between different temperaturesettings in rapid succession, the automatic cli‐mate control does not have sufficient time toadjust the set temperature.
Rear window defrosterThe rear window defrosterswitches off automatically after acertain period of time.
Depending on the vehicle equipment, upperwires are used as an antenna and are not partof the rear window defroster.
Defrosting and defogging windowsQuickly removes ice and con‐densation from the windshieldand front side windows. For thispurpose, also switch on the cool‐ing function.
The windshield heating switches on automati‐cally.
Windshield heatingThe windshield heating switchesoff automatically after sometime.
Cooling functionThe cooling function cools anddehumidifies the incoming airbefore reheating it as required,according to the temperaturesetting. The passenger compart‐
ment can only be cooled with the engine run‐ning.
The cooling function helps to prevent conden‐sation on the windows or to remove it quickly.
Depending on the weather, the windshield mayfog up briefly when the engine is started. Recir‐culated air mode is switched on automatically ifnecessary.The cooling function is switched on automati‐cally when the AUTO button is pressed.
Microfilter/activated-charcoal filterThe microfilter traps dust and pollen. The acti‐vated-charcoal filter provides additional protec‐tion by filtering gaseous pollutants from theoutside air. The service center replaces thiscombined filter during routine maintenance.
Ventilation
1 Knob for continuous opening and closing2 Nozzle for direction of air flow
Opening/closingTurn the knob.
Direction of air flowPivot the entire nozzle.
Seite 91
Climate Controls
91Online Edition for Part no. 01 40 2 911 521 - VI/13
Interior equipmentVehicle equipmentThis chapter describes all series equipment aswell as country-specific and special equipmentoffered for this model series.Therefore, it alsodescribes equipment that may not be found inyour vehicle, for instance due to the selectedspecial equipment or the country version. Thisalso applies to safety-related functions and sys‐tems.
Universal garage dooropenerThe conceptThe universal garage door opener can be usedto operate up to 3 functions in remote-control‐led systems, such as garage door drives orlighting systems. The universal garage dooropener replaces up to 3 different hand-heldtransmitters. To operate it, the buttons on theinterior rearview mirror must be programmedfor the desired functions. The hand-held trans‐mitter for the system is needed for the pro‐gramming procedure.
During programmingDuring programming and before activat‐
ing a device using the Universal Garage DoorOpener, ensure that there are no people, ani‐mals, or objects in the range of movement ofthe remote-controlled device; otherwise, thereis a risk of injury or damage.Also follow the safety instructions of the hand-held transmitter.◀
Before selling the vehicle, delete the storedfunctions for security reasons.
CompatibilityIf this symbol is printed on the packag‐ing or in the operating instructions ofthe system being operated, the system
is generally compatible with the universal ga‐rage door opener.If you have any questions, please contact:▷ Your service center.▷ www.homelink.com on the Internet.HomeLink is a registered trademark of JohnsonControls, Inc.
Controls on the interior rearview mirror
1 LED2 Buttons3 Hand-held transmitter, required for pro‐
gramming.
Programming
General information1. Switch on the ignition.2. Initial setup:
Press the right and left buttons on the inte‐rior rearview mirror simultaneously for ap‐prox. 20 seconds until the LED on the inte‐rior rearview mirror begins to flash. Allprogrammed settings of the buttons on theinterior rearview mirror are deleted.
Seite 92
Controls Interior equipment
92 Online Edition for Part no. 01 40 2 911 521 - VI/13
3. Hold the hand-held transmitter of the sys‐tem to be operated a distance of approx. 1to 3 in/2.5 to 8 cm away from the buttonson the interior rearview mirror. The re‐quired distance depends on the particularhand-held transmitter.
4. Press the button of the desired function onthe hand-held transmitter and the buttonbeing programmed on the interior rearviewmirror simultaneously and hold. The LED onthe interior rearview mirror flashes slowly atfirst.
5. When the LED flashes more rapidly, releaseboth buttons. Rapid flashing indicates thatthe button on the interior rearview mirrorhas been programmed.If the LED does not flash faster after 60 sec‐onds, change the distance between the in‐terior rearview mirror and the hand-heldtransmitter and repeat the step. Multipletrials at different distances may be neces‐sary. Wait at least 15 seconds between tri‐als.
6. To program additional functions on otherbuttons, repeat steps 3 to 5.
The systems can be operated with the buttonson the interior rearview mirror.
Special characteristics of alternating-code radio systemsIf the system cannot be operated after re‐peated programming, check whether the sys‐tem to be operated uses an alternating-codesystem.Read the operating instructions of the systemor press and hold the programmed button onthe interior rearview mirror. If the LED on theinterior rearview mirror flashes rapidly at firstand then lights up continuously for 2 seconds,the system is equipped with an alternating-code system. This flashing LED pattern repeatsitself for approx. 20 seconds.
In systems with an alternating-code system, theuniversal garage door opener and the systemmust be additionally synchronized.Please obtain additional information on syn‐chronization in the operating instructions of thesystem being set up.The systems will be easier to synchronize withthe aid of a second person.Synchronization:
1. Park the vehicle within range of the re‐mote-controlled system.
2. Program the corresponding button on theinterior rearview mirror as described.
3. Identify and press the synchronization but‐ton on the system being set up. You haveapprox. 30 seconds for the next step.
4. Press and hold the button on the interiorrearview mirror for approx. 3 seconds andthen release it. Repeat this step up to threetimes if necessary to complete the synchro‐nization procedure. When synchronizationis completed, the programmed function isexecuted.
Reprogramming individual buttons1. Switch on the ignition.2. Hold the hand-held transmitter at a dis‐
tance of approx. 1 to 3 in/2.5 to 8 cm fromthe memory buttons.The required distance depends on the par‐ticular hand-held transmitter.
3. Press the memory button of the universalgarage door opener.
4. If the LED flashes slowly after approx.20 seconds, press the transmit button onthe hand-held transmitter.
5. Release both buttons when the LED flashesrapidly.If the LED does not flash rapidly after ap‐prox. 60 seconds, change the distance andrepeat the step.
Seite 93
Interior equipment Controls
93Online Edition for Part no. 01 40 2 911 521 - VI/13
Canada: if the LED does not flash rapidly af‐ter approx. 60 seconds, change the dis‐tance and repeat the step. If programmingwas aborted by the hand-held transmitter,hold down the memory button and pressand release the button on the hand-heldtransmitter several times for 2 seconds.
ControlsPrior to operationBefore operating a unit with the Universal
Garage Door Opener, ensure that there are nopeople, animals, or objects in the range ofmovement of the system; otherwise, there is arisk of injury or damage.Also follow the safety instructions of the hand-held transmitter.◀
The system, such as the garage door, can beoperated using the button on the interior rear‐view mirror with the engine running or the igni‐tion switched on. When you are within the re‐ception range of the system, press and hold thebutton until the function is initiated. The LED onthe interior rearview mirror lights up continu‐ously while the radio signal is being transmit‐ted.
Deleting stored functionsPress the right and left buttons on the interiorrearview mirror simultaneously for approx.20 seconds until the LED flashes rapidly. Allstored functions are deleted. The functions can‐not be deleted individually.
Digital compass
1 Adjustment button on the back of the mir‐ror
2 Display
The display shows the main or secondary com‐pass direction in which the vehicle is traveling.
Operating conceptVarious functions can be called up by pressingthe adjustment button with a pointed objectsuch as a pen. The following adjustment op‐tions are displayed one after the other, de‐pending on how long the adjustment button ispressed:▷ Press briefly: switch the display on/off.▷ 3 to 6 seconds: set the compass zone.▷ 6 to 9 seconds: calibrate the compass.▷ 9 to 12 seconds: set left-hand/right hand
steering.▷ 12 to 15 seconds: set the language.
Setting compass zonesSet the compass zone corresponding to the ve‐hicle's geographic location so that the compasscan function correctly; refer to the world mapwith compass zones.
Seite 94
Controls Interior equipment
94 Online Edition for Part no. 01 40 2 911 521 - VI/13
Press the adjustment button for 3‑4 seconds.The number of the compass zone set is shownin the display.To change the zone setting, briefly press theadjustment button repeatedly until the displayshows the number of the compass zone corre‐sponding to the current location.The compass is operational again after approx.10 seconds.
Calibrating the digital compassThe digital compass must be calibrated in thefollowing situations:▷ An incorrect compass direction is shown.▷ The cardinal direction displayed does not
change even if the direction of travelchanges.
▷ Not all compass directions are shown.
Procedure1. Make sure that there are no large metal ob‐
jects or overhead power lines in the vicinityof the vehicle and that there is enoughspace to drive in a circle.
2. Set the currently valid compass zone.3. Press the adjustment button for 6‑7 sec‐
onds to call up C. Then drive at least one fullcircle at a maximum speed of4 mph/7 km/h. When the system is cali‐brated, the C is replaced by the compass di‐rections.
Right-hand/left-hand steeringThe digital compass is set for right-hand or left-hand steering at the factory.
Setting the languagePress the adjustment button for 12‑13 seconds.Briefly press the adjustment button again toswitch between English "E" and German "O".The setting is automatically saved after approx.10 seconds.
Seite 95
Interior equipment Controls
95Online Edition for Part no. 01 40 2 911 521 - VI/13
Cupholders and ashtray/lighter
CupholdersTwo cupholders are located in the center con‐sole in the front.MINI Countryman: two additional cupholdersare located at the end of the center console inthe rear. Additional cupholders can be installedon the center rail.
MINI Paceman: additional cupholders are lo‐cated in the console between the rear seats.
Depending on the equipment, additional cu‐pholders can be installed on the center rail.
Shatter-proof containers and no hotdrinks
Use light and shatter-proof containers and donot transport hot drinks. Otherwise, there is theincreased danger of injury in an accident.◀
Unsuitable containersDo not forcefully push unsuitable contain‐
ers into the cupholders. This may result in dam‐age.◀
AshtrayThe ashtray is located in one of the cupholdersin the center console at the front.
EmptyingTake out the entire ashtray, arrow.When installing, ensure that the ashtray is in‐serted in the cupholder with the adapter.
Lighter
With the engine running or the ignitionswitched on, press in the cigarette lighter.The lighter can be removed as soon as it popsback out.
Danger of burnsOnly hold the hot lighter by its head; oth‐
erwise, there is the danger of getting burned.Switch off the ignition and take the remotecontrol with you when leaving the vehicle sothat children cannot use the lighter and burnthemselves.◀
Seite 96
Controls Interior equipment
96 Online Edition for Part no. 01 40 2 911 521 - VI/13
Connecting electrical de‐vicesThe lighter socket can be used as a socket forelectrical equipment while the engine is run‐ning or when the ignition is switched on. Thetotal load of all sockets must not exceed140 watts at 12 volt.Avoid damaging the sockets by attempting toinsert plugs of unsuitable shape or size.
Do not connect the charger to the socketDo not connect the battery charger to the
socket installed in the vehicle at the factory asthis could damage the battery.◀
Replace the cover after useReplace the lighter or socket cover after
use; otherwise, objects that fall into the lightersocket or power socket could cause a short cir‐cuit.◀
Socket in the center consoleRemove the cover or lighter, refer to page 96,from the socket.
Socket in the rear
MINI Countryman
Take out the cover.
MINI Paceman
Take out the cover.
Socket in the cargo area
MINI Countryman
Take out the cover.
MINI Paceman
Take out the cover.
Seite 97
Interior equipment Controls
97Online Edition for Part no. 01 40 2 911 521 - VI/13
Cargo areaCargo cover
Do not place objects on the coversDo not place objects on the cover; if you
do so, they may pose a danger to vehicle occu‐pants during braking or evasive maneuvers ordamage the cover.◀
When the tailgate is opened, the cargo cover israised.To load bulky luggage, the cover can be re‐moved.
1. Detach the securing straps from the tail‐gate.
2. Lift the cover slightly, arrow 1, and pull itback and out of the bracket, arrow 2.
MINI Countryman:
MINI Paceman:
MINI Countryman: rear seat backrestsDanger of pinchingBefore folding down the rear seat back‐
rests, ensure that path of movement of thebackrests is clear. Especially when the middlesection is folded down, ensure that no one islocated in or reaches into the path of move‐ment of the rear seat backrests. Otherwise, in‐juries or damage may result.◀
Observe the instructions concerning thesafety belt
Observe the instructions concerning the safetybelt, refer to page 38. Otherwise, personal pro‐tection may be compromised.◀
The rear seat backrest is divided at a ratio of40-20-40.When the outer rear seat backrests are foldeddown, it is not permissible for a person to travelon the center seat.Remove the third head restraint, refer topage 41, if necessary.Open the center safety belt and insert it in thebelt holder on the headliner, refer to page 39.Enlarge the cargo area by adjusting the rearseat backrests to a more upright position.The backrests can be adjusted to 10 differentpositions between the comfort and transportpositions and they can be folded down.In the comfort position, the backrests are tiltedback to the greatest possible angle and in thetransport position they are nearly vertical.
Seite 98
Controls Interior equipment
98 Online Edition for Part no. 01 40 2 911 521 - VI/13
Before beginning with the mounting of a childrestraint fixing system, note the instructions,refer to page 44.
1. Hold the top of the backrest, for examplethe head restraint, and pull on the loop, ar‐row.
2. Engage the backrest in the desired positionor fold it down.
Folding the backrests back upLocking the backrestWhen folding back, ensure that the locks
engage properly; otherwise, cargo could becatapulted forward into the passenger com‐partment during braking maneuvers andswerving, endangering the occupants.◀
No child restraint fixing systemsDo not mount child restraint fixing sys‐
tems in the rear when the rear seat backrestsare adjusted to a more vertical position; other‐wise, the protection provided by these systemsmay be reduced.◀
When the backrests are folded back up, theyengage in the transport position.To set the desired backrest inclination or com‐fort position, hold the backrest, pull the loopforward, and adjust the backrest.
MINI Paceman: rear seat backrestsDanger of pinchingBefore folding down the rear seat back‐
rests, ensure that path of movement of thebackrests is clear; otherwise, injuries or damagemay result.◀
1. Pull on the respective loop, arrow.The backrest is unlocked.
2. Fold the backrest forward.
Folding the backrests back upHold the top of the backrest, for example thehead restraint, and fold it back.
Locking the backrestWhen folding back, ensure that the locks
engage properly; otherwise, cargo could becatapulted forward into the passenger com‐partment during braking maneuvers andswerving, endangering the occupants.◀
Flat loading floorMaximum loadDo not exceed the maximum load of
330 lbs, 150 kg, on the loading floor; otherwise,damage may result.◀
Access to storage areaA storage area for items like the partition net isfound under the loading floor.
1. Reach into the recess, arrow 1, on the rearedge of the loading floor.
Seite 99
Interior equipment Controls
99Online Edition for Part no. 01 40 2 911 521 - VI/13
2. Lift the loading floor at the rear, arrow 1,and fold it forward, arrow 2.
MINI Countryman:
MINI Paceman:
Before closing the tailgate, lower the loadingfloor back onto the cargo area floor.
RemovingThe loading floor can be removed if necessary.
1. Fold up the loading floor.2. Pull it back slightly and out of the holders.3. Then remove it upward.The folded loading floor can be stored in thecargo area.
MINI Countryman: partition netFirmly attach the partition netMake sure that the partition net is firmly
attached; otherwise, injuries may result.◀
Before installing1. Remove the pouch with the partition net
from the storage compartment under theloading floor in the cargo area.
2. Take the partition net out of the pouch, un‐roll it, and unfold it.After use, fold and roll up the partition netin the same manner and place it in thepouch so that it can be stowed back underthe cargo floor panel. Ensure that hooksand tensioning buckles do not rest on therod elements.
3. Unfold the partition net to the point wherethe rod elements engage.
Installation behind the front seats
1. Take out the cargo cover if necessary.2. Fold down the rear seat backrests, refer to
Enlarging the cargo area.3. Insert the retaining pins of the partition net
all the way into the front holders in theheadliner, arrow 1, and push forward.
4. Attach the hooks, arrow 2, at the bottom ofthe retaining straps on both sides to theeyelets on the vehicle floor.
5. Lash the partition net tightly. To do this,tighten the retaining straps using the ten‐sioning buckles.
RemovingTo remove and stow the partition net, proceedin reverse order.
Seite 100
Controls Interior equipment
100 Online Edition for Part no. 01 40 2 911 521 - VI/13
To fold up, press the release button, arrow.
MINI Countryman: multi-function hook
Hooks designed for hanging shopping bags andtotes, for example, are located on the left andright sides of the cargo cover support, arrow.
Do not hang heavy items from the hooksOnly hang light bags or suitable objects
from the holders. Otherwise, there is a dangerof objects flying about during braking and eva‐sive maneuvers.Only transport heavy luggage in the trunk if ithas been appropriately secured.◀
Seite 101
Interior equipment Controls
101Online Edition for Part no. 01 40 2 911 521 - VI/13
Storage compartmentsVehicle equipmentThis chapter describes all series equipment aswell as country-specific and special equipmentoffered for this model series.Therefore, it alsodescribes equipment that may not be found inyour vehicle, for instance due to the selectedspecial equipment or the country version. Thisalso applies to safety-related functions and sys‐tems.
NotesNo loose objects in the passenger com‐partment
Do not stow any objects in the passenger com‐partment without securing them; otherwise,they may present a danger to occupants for in‐stance during braking and avoidance maneu‐vers.◀
No non-slip mats on the dashboardDo not use non-slip materials, such as
non-slip mats, on the dashboard, or it could bedamaged by the substances in the materials.◀
Storage compartmentsInterior▷ Glove compartment, refer to page 102.▷ Center armrest, refer to page 103.▷ Center rail, refer to page 104.▷ Compartments in the center console.▷ Compartments in the doors.▷ Pockets on the back of the front seat back‐
rests.▷ Cupholder, refer to page 96.▷ Clothes hooks, refer to page 105.
Cargo area▷ Lashing eyes, refer to page 115.▷ Storage compartment under the flat load‐
ing floor, refer to page 99.▷ Multi-function hook on the cargo cover
support, refer to page 101.
Glove compartmentOpening
Pull the handle to open the lid.The light in the glove compartment switcheson.
ClosingFold up the cover.
Close the glove compartment again im‐mediately
Close the glove compartment immediately afteruse while driving; otherwise, injury may occurduring accidents.◀
VentilationDepending on the vehicle's equipment, theglove compartment can be ventilated and, ifthe cooling function is switched on, cooled.
Seite 102
Controls Storage compartments
102 Online Edition for Part no. 01 40 2 911 521 - VI/13
Opening
Turn the switch in the direction of the arrow.
ClosingMove the switch to the vertical position byturning it in the opposite direction of the arrow.Depending on the temperature setting of theair conditioning or automatic climate control,high temperatures may occur in the glove com‐partment.
Center armrestThe center armrest between the front seatscontains a storage compartment or a cover forthe snap-in adapter, refer to page 143, de‐pending on the equipment.The center armrest between the rear seats con‐tains a storage compartment.Do not position tall accessory parts directly onthe center rail of the center armrest; otherwise,they may be damaged when the center arm‐rest is opened or closed.
Center armrest front
OpeningPress the button, arrow, and pull up the lid.
MINI Paceman: center armrest, rear
RemovingThe rear center armrest can be removed to en‐large the loading area.
1. Turn the handwheel counterclockwise allthe way to open it, arrow 1.
2. Push the center armrest back slightly in thebase plate, arrow 2.
3. Lift the center armrest at the front andpivot it out.
Seite 103
Storage compartments Controls
103Online Edition for Part no. 01 40 2 911 521 - VI/13
Installing1. Insert the center armrest into the rear re‐
cess of the base plate, arrow 1.2. Push it back and pivot it down at the front,
arrow 2.
3. Push the center armrest forward in the baseplate.
4. Tighten the handwheel by turning it clock‐wise.
Ensure that the center armrest engages prop‐erly when installed; otherwise, it could becomedamaged during braking maneuvers, for exam‐ple.
Center railVarious accessory parts can be mounted on thecenter rail and moved to different positions.Do not use accessory parts in the area of thehandbrake; otherwise, they may become dam‐aged when the handbrake lever is activated.
Smartphone cradleThe upper part of the smartphone cradle canbe rotated by 360°.When installing it at the front of the rail, ensurethat it is surrounded by adequate clearance,such as toward the seat; otherwise, damagemay result when it is rotated.
1. Pull up the lever 1 to unlock the holders.
2. Insert the smartphone cradle into the cen‐ter rail with the holders 2 first.
3. To fix, push the lever 1 downward. Ensurethat the lever is properly engaged.
When connecting a smartphone to the USB au‐dio interface, refer to page 131, pass the con‐nection cable under the smartphone cradle.In addition, the connection cable can be at‐tached inside the rail.
1. Twist the rail segment, arrow 1, to removeit.
2. Insert the connection cable centrally intothe recess, arrow 2.
3. Fix the rail segment in the rail.
Base plateVarious accessory parts such as cupholders,eyeglass holders, and mobile phone cradles canbe mounted on the base plate.
Inserting the base plateThe lever 3 can be engaged in three positions.
Seite 104
Controls Storage compartments
104 Online Edition for Part no. 01 40 2 911 521 - VI/13
0 Setting1 Adjusting the position on the rail2 Inserting the base plate
To insert, move the lever to position 2.
Adjusting the position and fixing1. Push lever 3 into position 1.2. Adjust the position of the base plate.3. Push lever 3 downward into position 0.
Do not apply excessive pressure to thelever.
The base plate is fixed.Fix the base plateFix the base plate before driving away;
otherwise, injuries may result during an acci‐dent.◀
An example: eyeglass holderAttach the eyeglass holder and adjust the posi‐tion.
Mounting the eyeglass holder1. If necessary, fix the base plate, refer to Ad‐
justing the position and fixing.2. Pull up lever 6 to unlock the holders.
3. First engage the eyeglass holder in thefront holders 4 and then in the rear hold‐ers 5.
Ensure that lever 6 is across from holder 4.
Clothes hooksClothes hooks are located on the grab handlesin the rear.
Do not obstruct viewWhen suspending clothing from the
hooks, ensure that it will not obstruct the driv‐er's vision.◀
No heavy objectsDo not hang heavy objects from the
hooks; otherwise, they may present a dangerto passengers during braking and evasive ma‐neuvers.◀
Seite 105
Storage compartments Controls
105Online Edition for Part no. 01 40 2 911 521 - VI/13
Connection for an exter‐nal audio device
This can be used to connect an external audiodevice, such as a CD or MP3 player.
Radio MINI Boost CD, refer to page 130.
Seite 106
Controls Storage compartments
106 Online Edition for Part no. 01 40 2 911 521 - VI/13
At a glance
Controls
Driving tips
Entertainment
Communication
Mobility
Reference
Online Edition for Part no. 01 40 2 911 521 - VI/13
Things to remember when drivingVehicle equipmentThis chapter describes all series equipment aswell as country-specific and special equipmentoffered for this model series.Therefore, it alsodescribes equipment that may not be found inyour vehicle, for instance due to the selectedspecial equipment or the country version. Thisalso applies to safety-related functions and sys‐tems.
Breaking-in periodGeneral informationMoving parts need to be broken in to adjust toeach other.The following instructions will help achieve along vehicle life and good economy.
Engine and differentialAlways obey all official speed limits.
Up to 1,200 miles/2,000 kmDrive at various engine and vehicle speeds, butdo not exceed:▷ For a gasoline engine, 4,500 rpm and
100 mph/160 km/h.Avoid full-throttle operation and use of thetransmission's kickdown mode for the initialmiles.
From 1,200 miles/2,000 kmThe engine and vehicle speed can gradually beincreased.
TiresDue to technical factors associated with theirmanufacture, tires do not achieve their full trac‐
tion potential until after an initial breaking-inperiod.Drive conservatively for the first200 miles/300 km.
Brake systemBrakes require an initial break-in period of ap‐prox. 300 miles/500 km to achieve optimizedcontact and wear patterns between brake padsand discs. Drive cautiously during this break-inperiod.
ClutchThe clutch requires an initial break-in period ofapprox. 300 miles/500 km to function at an op‐timal level.During this break-in period, engage the clutchgently.
Following part replacementThe same breaking in procedures should be ob‐served if any of the components mentionedabove have to be renewed in the course of thevehicle's operating life.
General driving notesGround clearance
Ensure adequate ground clearanceEnsure adequate ground clearance, e.g.,
when driving into underground garages, whendriving over curbs, or when driving in winter;otherwise, damage may occur to the vehicle.◀
Seite 110
Driving tips Things to remember when driving
110 Online Edition for Part no. 01 40 2 911 521 - VI/13
Closing the tailgateDrive with the tailgate closedOnly drive with the tailgate closed; other‐
wise, passengers and other road users may beendangered or the vehicle may be damaged ifan accident occurs or during braking or swerv‐ing. In addition, exhaust fumes may enter thepassenger compartment.◀
If, despite this, the vehicle must be driven withthe tailgate open:▷ Drive moderately.▷ Close all windows and the glass sunroof.▷ Switch off recirculated air mode and greatly
increase the blower speed.
Hot exhaust systemHot exhaust systemHigh temperatures are generated in the
exhaust system.Do not remove the heat shields installed andnever apply undercoating to them. Make surethat flammable materials, e. g. hay, leaves,grass, etc. do not come in contact with the hotexhaust system during driving, while in idle po‐sition mode, or when parked. Such contactcould lead to a fire, and with it the risk of seri‐ous personal injury as well as property damage.Do not touch hot exhaust pipes; otherwise,there is the danger of getting burned.◀
Mobile communication devices in thevehicle
Mobile communication devices in the ve‐hicle
It is not recommended to use mobile phones,such as mobile phones without a direct con‐nection to an external aerial in the vehicle'spassenger compartment. Otherwise, the vehi‐cle electronics and mobile communication de‐vices can interfere with each other. In addition,there is no assurance that the radiation gener‐
ated during transmission will be dischargedfrom the vehicle interior.◀
HydroplaningOn wet or slushy roads, a wedge of water canform between the tires and road surface.This phenomenon is referred to as hydroplan‐ing. It is characterized by a partial or completeloss of contact between the tires and the roadsurface, ultimately undermining your ability tosteer and brake the vehicle.
HydroplaningWhen driving on wet or slushy roads, re‐
duce your speed to prevent hydroplaning.◀
The risk of hydroplaning increases as the tiretread depth decreases. Minimum tread depth,refer to page 158.
Driving through waterDrive though calm water only if it is not deeperthan 12 inches/30 cm and at this height, nofaster than walking speed, up to6 mph/10 km/h.
Using the handbrake on inclinesUsing the handbrakeOn inclines, do not hold the vehicle sta‐
tionary with a slipping clutch for extended pe‐riod; use the handbrake instead. Otherwise, theclutch will be subject to increased wear.◀
Support from the hill drive-off assistant, refer topage 83.
Braking safelyThe vehicle is equipped with ABS as a standardfeature.Applying the brakes fully is the most effectiveway of braking in situations when this is neces‐sary.The vehicle maintains steering responsiveness.You can still avoid any obstacles with a mini‐mum of steering effort.
Seite 111
Things to remember when driving Driving tips
111Online Edition for Part no. 01 40 2 911 521 - VI/13
Pulsation of the brake pedal and sounds fromthe hydraulic circuits indicate that ABS is in itsactive mode.
Do not let your foot rest on the brakepedal
Do not drive with your foot resting on the brakepedal. Even light but consistent pedal pressurecan lead to high temperatures, brake wear andpossibly even brake failure.◀
Objects in the area around the pedalsNo objects in the area around the pedalsKeep floor mats, carpets, and any other
objects out of the area of motion of the pedals;otherwise, the function of the pedals could beimpeded while drivingDo not place additional floor mats over existingmats or other objects.Only use floor mats that have been approvedfor the vehicle and can be properly fixed inplace.Ensure that the floor mats are securely fastenedagain when they are returned after being re‐moved, such as for cleaning.◀
Driving in wet conditionsWhen roads are wet or there is heavy rain,briefly exert gentle pressure on the brake pedalevery few miles.Ensure that this action does not endanger otherroad users.The heat generated in this process helps drythe brake discs and pads.In this way braking efficiency will be availablewhen you need it.
HillsDrive long or steep downhill gradients in thegear in which the least braking is required. Oth‐erwise, the brake system may overheat, result‐ing in a reduction in the brake system effi‐ciency.
You can increase the engine's braking effect byshifting down, going all the way to first gear, ifnecessary.Downshifting in manual mode of the automatictransmission, refer to page 57.
Avoid load on the brakesAvoid placing excessive load on the brake
system. Light but consistent brake pressure canlead to high temperatures, brake wear andpossibly even brake failure.◀
Do not drive in neutralNever drive with the transmission in neu‐
tral, with the engine switched off or with theclutch depressed; otherwise, you will have nei‐ther the braking action of the engine or nor itspower assistance when braking or steering.◀
Brake disc corrosionCorrosion on the brake discs and contamina‐tion on the brake pads are furthered by:▷ Low mileage.▷ Extended periods when the vehicle is not
used at all.▷ Infrequent use of the brakes.Corrosion occurs when the minimum pressurethat must be exerted by the pads during brakeapplications to clean the discs is not reached.Should corrosion form on the brake discs, thebrakes will tend to respond with a pulsating ef‐fect that generally cannot be corrected.
When the vehicle is parkedWhen using the automatic climate control, con‐densation water develops that exits under‐neath the vehicle.Therefore, traces of condensed water under thevehicle are normal.After the engine is switched off, the coolantpump may continue running for some time inthe MINI Cooper S. This causes noises in the en‐gine compartment.
Seite 112
Driving tips Things to remember when driving
112 Online Edition for Part no. 01 40 2 911 521 - VI/13
Driving on poor roadsYour MINI with ALL4 all-wheel drive feels com‐fortable on all streets and roads. It combines anall-wheel drive system with the advantages of anormal passenger car.
Do not drive on unpaved terrainDo not drive on unpaved terrain, as oth‐
erwise the vehicle may be damaged.◀
For your own safety and the safety of passen‐gers and the vehicle, adhere to the followingpoints:▷ Familiarize yourself with the vehicle before
driving; never take risks.▷ Adjust speeds according to road conditions.
The steeper and rougher the road surfaceis, the lower the speed should be.
▷ When driving on steep uphill and downhillgrades: the engine oil and coolant shouldbe filled nearly to the MAX mark.
▷ Watch for stones, holes, and other obsta‐cles and drive around these where possible.
▷ On bumps and rough roads, avoid contactbetween the vehicle body and the ground.The maximum ground clearance is 6 in‐ches/15 cm and may vary with the loadedcargo.
▷ When driving through water, do not exceedthe maximum water height of 12 in‐ches/30 cm and drive at walking speed.
▷ After driving through water, press on thebrake pedal several times at low speeds todry the brakes.
▷ Depending on the prevailing terrain, acti‐vate Dynamic Traction Control DTC briefly,refer to page 82.
▷ When the wheels spin, accelerate to enablethe driving stability control systems to dis‐tribute the drive force to the individualwheels.
After driving on poor roadsAdhere to the following points to ensure vehi‐cle safety:▷ Remove excessive accumulations of dirt
and mud from the vehicle body.▷ Clear mud, snow, ice, etc., from the wheels
and tires and check for damage.
Seite 113
Things to remember when driving Driving tips
113Online Edition for Part no. 01 40 2 911 521 - VI/13
LoadingVehicle equipmentThis chapter describes all series equipment aswell as country-specific and special equipmentoffered for this model series.Therefore, it alsodescribes equipment that may not be found inyour vehicle, for instance due to the selectedspecial equipment or the country version. Thisalso applies to safety-related functions and sys‐tems.
General informationOverloading the vehicleTo avoid exceeding the approved carry‐
ing capacity of the tires, never overload the ve‐hicle. Overloading can lead to overheating andincreases the rate at which damage developsinside the tires. This could result in a suddenloss of tire inflation pressure.◀
No fluids in the cargo areaMake sure that fluids do not leak into the
cargo area; otherwise, the vehicle may be dam‐aged.◀
Determining the loadlimit
1. Locate the following statement on your ve‐hicle’s placard:
▷ The combined weight of occupants andcargo should never exceed XXX kg orYYY lbs. Otherwise, damage to the ve‐hicle and unstable driving situationsmay result.
2. Determine the combined weight of thedriver and passengers that will be riding inyour vehicle.
3. Subtract the combined weight of the driverand passengers from XXX kilograms or YYYpounds.
4. The resulting figure equals the availableamount of cargo and luggage load ca‐pacity.For example, if the YYY amount equals1,000 lbs and there will be four 150 lbs pas‐sengers in your vehicle, the amount ofavailable cargo and luggage load capacityis 400 lbs: 1,000 lbs minus 600 lbs =400 lbs.
5. Determine the combined weight of luggageand cargo being loaded on the vehicle.That weight may not safely exceed theavailable cargo and luggage load capacitycalculated in Step 4.
6. If your vehicle will be towing a trailer, loadfrom your trailer will be transfered to yourvehicle. Consult the manual for transportinga trailer to determine how this may reducethe available cargo and luggage load ca‐pacity of your vehicle.
Load4-seater:
Seite 114
Driving tips Loading
114 Online Edition for Part no. 01 40 2 911 521 - VI/13
5-seater:
The maximum load is the sum of the weight ofthe occupants and the cargo.The greater the weight of the occupants, theless cargo that can be transported.
Stowing cargo▷ Very heavy cargo: when the rear seat is not
occupied, secure each of the outer safetybelts in the opposite buckle.
▷ Heavy cargo: stow as far forward and aslow as possible, ideally directly behind thebackrests.
▷ Cover sharp edges and corners.▷ Do not pile cargo higher than the top edge
of the backrests.▷ If necessary, fold down the rear backrests
to stow cargo.▷ Use the partition net, refer to page 100, to
protect passengers. Make sure that objectscannot penetrate the partition net.
▷ Place protective material around any sharp-edged or pointed objects that could bump
against the rear window while the vehicle isin motion.
MINI Countryman
MINI Paceman
Securing cargoLashing eyes in the cargo area
MINI Countryman
Seite 115
Loading Driving tips
115Online Edition for Part no. 01 40 2 911 521 - VI/13
MINI Paceman
Securing cargo▷ Secure smaller and lighter pieces with tight‐
ening belts or straps.▷ Secure larger and heavier pieces with cargo
straps.Adhere to the information included withthe cargo straps.
▷ Eight mounting eyes are available for fas‐tening the cargo straps.Two of them are located on the side wall ofthe cargo area, arrows 1, and two are lo‐cated on the rear wall of the cargo area, ar‐rows 2.
Securing cargoStow and secure the cargo as described
above; otherwise it may present a danger tothe occupants, for instance during braking andavoidance maneuvers.Do not stow any heavy and hard objects in thepassenger compartment without securingthem; otherwise, they may present a danger tooccupants, for instance during braking andavoidance maneuvers.Never exceed either the approved gross vehicleweight or either of the approved axle loads, asexcessive loads can pose a safety hazard, andmay also place you in violation of traffic safetylaws.Do not secure cargo using the upper LATCHmounting points, refer to page 46; otherwise,these may become damaged.◀
Roof-mounted luggagerackNotesA special rack system is available as an optionalaccessory.
AttachmentFollow the installation instructions for the roof-mounted luggage rack.Ensure that adequate clearance is available forthe movement of the glass sunroof.
LoadingBecause roof racks raise the vehicle's center ofgravity when loaded, they have a major effecton vehicle handling and steering response.Therefore, note the following when loading anddriving:▷ Do not exceed the approved roof/axle
loads and the approved gross vehicleweight.
▷ Distribute the roof load uniformly.▷ The roof load should not be too large in
area.▷ Always load the heaviest pieces on the bot‐
tom.▷ Fasten the roof-mounted luggage securely,
for instance using lashing straps.▷ Do not let objects project into the opening
path of the tailgate.▷ Drive smoothly. Avoid sudden acceleration
and braking maneuvers. Take corners gen‐tly.
Rear luggage rackNotesA special rear rack is available as an optionalaccessory. It does not require a trailer hitch.
Seite 116
Driving tips Loading
116 Online Edition for Part no. 01 40 2 911 521 - VI/13
Follow the installation instructions for the rearrack.
Anchorage pointsMINI Countryman:
MINI Paceman:
The anchorage points are under the covers inthe bumper.Push out the covers on the corresponding cut‐outs.
LoadingWhen loading the vehicle, ensure that the ap‐proved gross vehicle weight and the axle loadsare not exceeded. Adhere to the weight specifi‐cations in the technical data.
Seite 117
Loading Driving tips
117Online Edition for Part no. 01 40 2 911 521 - VI/13
Saving fuelVehicle equipmentThis chapter describes all series equipment aswell as country-specific and special equipmentoffered for this model series.Therefore, it alsodescribes equipment that may not be found inyour vehicle, for instance due to the selectedspecial equipment or the country version. Thisalso applies to safety-related functions and sys‐tems.
General informationYour vehicle contains advanced technology forthe reduction of fuel consumption and emis‐sions.Fuel consumption depends on a number of dif‐ferent factors. The implementation of certainmeasures, driving style and regular mainte‐nance can have an influence on fuel consump‐tion and on the environmental impact.
Remove unnecessary cargoAdditional weight increases fuel consumption.
Remove attached parts following useRemove unneeded auxiliary mirrors, roof orrear luggage racks after use.Attached parts on the vehicle impair the aero‐dynamics and increase the fuel consumption.
Close both windowsOpen windows causes higher air resistance andthus increases fuel consumption.
Check the tire inflation pressureregularlyCheck and, if necessary, correct the tire infla‐tion pressure, refer to page 152, at least twicea month and before starting on a long trip.
Low tire inflation pressure increases rolling re‐sistance and thus raises fuel consumption andtire wear.
Drive away without delayDo not wait for the engine to warm-up whilethe vehicle remains stationary. Start drivingright away, but at moderate engine speeds.This is the fastest way for the cold engine toreach its operating temperature.
Look well ahead when drivingAvoid unnecessary acceleration and braking. Toachieve this, maintain a suitable distance to thevehicle driving ahead of you.Driving smoothly and looking ahead reducesfuel consumption.
Avoid high engine speedsUse 1st gear to get the vehicle in motion. Be‐ginning with 2nd gear, accelerate rapidly. Whenaccelerating, shift up before reaching high en‐gine speeds.When you reach the desired speed, shift intothe highest applicable gear and drive with theengine speed as low as possible and at a con‐stant speed.As a rule: driving at low engine speeds lowersfuel consumption and reduces wear.
Use coasting conditionsWhen approaching a red light, take your footoff the accelerator and coast to a halt in thehighest applicable gear.On a downhill slope, take your foot off the ac‐celerator and coast in a suitable gear.The flow of fuel is interrupted while coasting.
Seite 118
Driving tips Saving fuel
118 Online Edition for Part no. 01 40 2 911 521 - VI/13
Switch off the engine during longerstopsSwitch off the engine during longer stops, e.g.,at traffic lights, railroad crossings or in trafficcongestion.Fuel savings are already achieved after the en‐gine is turned off for as little as 4 seconds.
Automatic Engine Start/Stop FunctionThe Automatic Engine Start/Stop Function auto‐matically switches the engine off during a stop.If the engine is stopped and then started again,fuel consumption and emissions drop com‐pared to an engine that runs permanently.Stopping the engine even for just a few sec‐onds can result in savings.In addition, fuel consumption depends on otherfactors as well, such as driving style, road con‐ditions, maintenance, and environmental fac‐tors.
Switch off any functions that are notcurrently neededFunctions such as seat heating and the rearwindow defroster require a lot of energy andconsume additional fuel, especially in city andstop-and-go traffic.Therefore, switch off these functions if they arenot actually needed.
Have maintenance carried outHave vehicles maintained regularly to achieveoptimal vehicle economy and operating life.Have the maintenance carried out by the serv‐ice center.Please also note the MINI maintenance system,refer to page 169.
Seite 119
Saving fuel Driving tips
119Online Edition for Part no. 01 40 2 911 521 - VI/13
At a glance
Controls
Driving tips
Entertainment
Communication
Mobility
Reference
Online Edition for Part no. 01 40 2 911 521 - VI/13
Radio MINI Boost CDVehicle equipmentThis chapter describes all series equipment aswell as country-specific and special equipmentoffered for this model series.Therefore, it also
describes equipment that may not be found inyour vehicle, for instance due to the selectedspecial equipment or the country version. Thisalso applies to safety-related functions and sys‐tems.
General informationAt a glance
1 Change the audio sources.2 On/off, volume.
▷ Press: switch on/off.▷ Turn: adjust the volume.
3 Show the tone settings.4 Function buttons for selecting the menu
items shown directly above them on thedisplay.
5 Change the station or track.
6 Display.7 Select the functions.
▷ Turn: highlight the menu item on thedisplay or set the value.
▷ Press: select the highlighted menu itemor store the settings.
8 Place/end calls.9 Opens the main menu.10 Manually select the frequency.
Seite 122
Entertainment Radio MINI Boost CD
122 Online Edition for Part no. 01 40 2 911 521 - VI/13
11 CD slot. 12 Eject the CD.
Representation in the Owner's Manual"…" Identifies radio display texts used to selectindividual functions.
Menu navigationRadio and telephone functions can be openedusing buttons on the radio and menus.
Opening menu itemsTo display the menu items:
▷ Press the button for the audiosources menu.
▷ Press the button for the mainmenu.
Selecting menu itemsThere are two ways to select a menu item onthe display.
Using the right knob
▷ To mark a menu item: turn the right knob,arrow 2.
▷ To select a menu item: press the right knob,arrow 1.
Using the function buttonsPress the left or right side of the functionbutton under the menu item.
If only one menu item is displayed above thefunction button, press the middle of the button.
Symbols on the display
Symbol Meaning
Function is selected.
Function is activated.
The function is deactivated.
Leave the menu, one menu back.
Display additional menu items.
Scroll display. The list contains morethan two entries.
Change to the higher level directory.
Setting valuesFor setting numerical values or values on ascale:
1. Mark the desired menu item and press theright knob.
2. Turn the right knob to set the value.3. Press the right knob to store the value.
Switching on/offPress the left knob. The radio selects the audiosource set last: radio, satellite radio, CD, exter‐nal audio device, or USB audio interface.
Listening to the radio with the ignitionswitched offWhen the radio ready state or the ignition isswitched off, the radio functions are availablefor approx. 20 minutes. To listen to the radio,switch it back on.To spare the battery, ensure that the radio isswitched off when you leave the vehicle.
Seite 123
Radio MINI Boost CD Entertainment
123Online Edition for Part no. 01 40 2 911 521 - VI/13
Adjusting the volumeTurn the left knob. The setting is stored for theremote control currently in use.When a call is placed using the hands-free sys‐tem, the audio sources are muted.
Speed-dependent volume and volumesof PDC signal tone and gong▷ "PDC": volume of the PDC signal tone com‐
pared to the audio sources.▷ "GONG": volume of the gong compared to
the audio sources.▷ "S-VOL": speed-dependent volume control.Set the audio sources to a high volume to beable to adjust the volume of the signal tonesmore easily.
1. Press the button.2. Select the symbol if necessary.3. Select the desired volume setting.4. Set the desired volume and press the right
knob.
Volume of external audio devicesAn external audio device such as an MP3 playercan be connected via the AUX-IN port in thecenter console and the audio tracks can beplayed over the car's loudspeaker system.The volume of the external audio device can beadjusted to the car radio.
1. Press the button.2. "AUX"3. "Vol-AUX"4. Set the desired volume and press the right
knob.
Tone settings▷ "BASS": depth adjustment.▷ "TREBLE": treble adjustment.▷ "FADER": front/rear volume distribution.
▷ "BAL": left/right volume distribution.The sound settings are set globally for all audiosources.
Setting the treble, bass, and volumedistribution
1. Press the button.2. Highlight the desired tone setting and press
the right knob.3. Create the desired setting and press the
right knob.
Resetting the tone settingsThe tone settings are reset to medium values.
1. Press the button.2. "RESET"
Time
Setting the time, date, and time format1. Switch on the radio ready state or the igni‐
tion.
2. Press the button.3. "CONFIG"4. "TIME"5. Select the desired category.6. Create the settings and press the right
knob.
Setting the units of measure of thecomputer and the language1. Switch on the radio ready state or the igni‐
tion.
2. Press the button.3. "CONFIG"4. ▷ "DIST": change the unit of measure for
the range.
Seite 124
Entertainment Radio MINI Boost CD
124 Online Edition for Part no. 01 40 2 911 521 - VI/13
▷ "LANG": select the language of the dis‐play texts.
▷ "CONSMP": change the unit of measurefor the average fuel consumption.
▷ "TEMP": change the unit of measure forthe external temperature.
5. Highlight the desired menu item and pressthe button.
6. Create the desired setting.
ComputerThe following vehicle information can be call upvia the computer:▷ Average fuel consumption▷ Average speed▷ Range
Displaying information1. Switch on the radio ready state or the igni‐
tion.
2. Press the button.3. "COMP"
Average fuel consumptionThe average fuel consumption is calculated forthe time during which the engine is running.To start calculation of the average fuel con‐sumption:
1. "CONSMP"2. "RESET"The previous display is set to zero and the sys‐tem begins recalculating the average fuel con‐sumption.
Average speedThe average speed is calculated for the timeduring which the engine is running.To start calculation of the average speed:
1. "SPEED"
2. "RESET"
Estimated range"RANGE"The display shows the estimated distance thatcan be still be driven on the remaining fuel,taking into consideration the driving style overthe last 18 miles/30 km.
RadioListening to the radioThe radio is designed for reception in the FMand AM wavebands.
1. Switch on the radio, refer to page 123.
2. Press this button if necessary.3. "TUNER"4. "FM" or"AM"
Press the corresponding button repeatedlyuntil the desired waveband is displayed.▷ FM: FM1, FM2, FMA▷ AM: AM, AMA
Selecting a stationThe setting is stored for the remote control cur‐rently in use.
Next station
Press the button.The next station with reception is selected.
Selecting the station manually byfrequency
1. Press the button.2. ▷ Press the respective function button to
set the desired frequency.▷ Turn the right knob until the desired
frequency is set.
Seite 125
Radio MINI Boost CD Entertainment
125Online Edition for Part no. 01 40 2 911 521 - VI/13
Automatically updating the stationswith the best reception, AUTOSTOREIn the FMA and AMA memory levels, stationsare automatically stored according to their re‐ception strength. If the AUTOSTORE function isnot used, six stations can be manually stored ineach of the FMA and AMA memory levels.
1. "FM" or"AM"Press the corresponding button until thefollowing is displayed:"AUTOSTORE"
It may take several seconds for the stations tobe stored and for one of these stations to beplayed back.
Briefly playing and selecting a station"SC"All stations with reception are played briefly.To interrupt the function and select a station:"SC"
Storing and retrieving a station
Memory locationsIt is possible to store up to 30 stations.▷ FM1, FM2, AM: six stations each.▷ FMA, AMA: the six stations with the best re‐
ception (automatically) or any six stations(manually).
Storing a station1. "FM" or"AM"
Select the desired function repeatedly untilthe desired waveband is displayed.
2. Select the station.3. "1" ... "6"
Press and hold the function button underthe desired memory location until the sta‐tion is audible again after a brief interrup‐tion.
Retrieving a stored station1. "FM" or"AM"
Select the desired function repeatedly untilthe desired waveband is displayed.
2. "1" ... "6"Press and hold the desired function buttonor turn the right knob until the desired sta‐tion is displayed.
Radio Data System, RDSRDS broadcasts additional information, such asthe station name or text messages, in the FMwaveband. When playing a station with multi‐ple frequencies, the system automaticallyswitches to the frequency with the best recep‐tion, if needed.Some stations broadcast the type of programreceived, or PTY, via RDS. This information isdisplayed briefly when the station is selected,for instance NEWS.PTY can also be used to display catastrophealerts, such as "ALARM".The alert is issued on the loudspeakers.
Switching the RDS on/off1. "SET"2. "RDS"When the RDS is switched off, the PTY functionis switched off as well.
Switching the program type displayon/off1. "SET"2. "PTY"
HD Radio™ receptionMany stations broadcast both analog and digi‐tal signals. These stations can be received digi‐tally and therefore with better sound quality. Adigital radio network must be available to beable to receive digital stations.License conditions
Seite 126
Entertainment Radio MINI Boost CD
126 Online Edition for Part no. 01 40 2 911 521 - VI/13
HD Radio Technology manufactured under li‐cense from iBiquity Digital Corporation. U.S.and Foreign Patents. HD Radio™ and the HD,HD Radio, and Arc logos are proprietary trade‐marks of iBiquity Digital Corp.
Activating/deactivating digital radioreception
1. Press the button.2. "TUNER"3. "SET"4. "HD"
Displays▷ "HD": a station is received digitally.▷ "(HD)": a station broadcasts digital signals
but digital radio reception is switched off.In areas in which the selected station is notcontinuously received in digital mode, playbackswitches between analog and digital reception.In this case, switch off digital radio reception.
Selecting the programs of a digitalstationSome stations broadcast multiple programs. Toselect one of these programs:
1. Press the button repeatedlyuntil the desired digital station is displayed.If a station broadcasts multiple programs,the following display appears, for example:"HD1"
2. "LIST"3. "HD1" ... "HD8" Select the desired pro‐
gram. Up to eight programs can be se‐lected per station.
Displaying additional informationFor digital stations, additional information canbe displayed on the current track, such as thename of the artist."INFO"
Operational displays▷ "acquiring": the system is looking for digital
stations.▷ "No Signal": no digital stations are being re‐
ceived.
Satellite radioOver 100 different channels with high fidelitycan be received. The channels are offered infixed packages and must be activated.You may experience signal drops and mutingevents related to this new technology.
Activating or deactivated channels
1. Press the button.2. "SAT"3. "CAT"4. Select the desired category.
The channels are displayed. This symbol identifies the current chan‐
nel.
Activating1. Turn the right knob to select a channel that
is not yet activated.2. Press the right knob to confirm a channel.
A phone number and the electronic serialnumber, ESN, are displayed. The electronicserial number is required for activation.
3. To have the channels activated, call thephone number.
Deactivating
1. Press the button.2. "SAT"3. "SAT"
Hold the button down.
Seite 127
Radio MINI Boost CD Entertainment
127Online Edition for Part no. 01 40 2 911 521 - VI/13
A phone number and the electronic serialnumber, ESN, are displayed. The electronicserial number is required for deactivation.
4. To have the channels deactivated, call thephone number.
Selecting and storing a channel
1. Press the button.2. "SAT"3. "CAT"4. Select the desired category.5. Select the desired channel.To display all channels:"ALL"To store a channel:
1. Select the symbol.2. "SAT"
Press the button repeatedly until the de‐sired memory level, SAT 1 or SAT 2, isreached.
3. "1" ... "6"Press and hold the function button underthe desired memory location until thechannel is audible again after a brief inter‐ruption.
Changing to the current channel"CURR"
Additional informationThe name of the channel and additional infor‐mation on the current track are displayed, suchas the name of the artist.
1. Select the desired channel.2. "INFO"
Changing the channel using the buttons
Press the button for the corre‐sponding direction. The next enabled channelis opened.
Search
1. Press and hold the button forthe corresponding direction. The activatedchannels appear on the display one afterthe other.
2. Release the button to select the displayedchannel.
NotesWhen there is a signal blockage or the trans‐mission is suspended momentarily for morethan 4 seconds, a message will appear on thedisplay.Service may be interrupted or unavailable forspecific reasons such as environmental or topo‐graphic conditions and others that SatelliteRadio cannot directly control. Signal may not beavailable under tunnels, in parking garages,next to tall buildings, nearby trees with densefoliage, nearby mountains or other possiblestrong sources of radio interference. Serviceshould resume normally after the source of sig‐nal unavailability has been cleared.
CD playerLoading the CD playerInsert the CD into the CD drive with the printedside up.Playback begins automatically.Reading can take a few minutes with com‐pressed audio files.
Seite 128
Entertainment Radio MINI Boost CD
128 Online Edition for Part no. 01 40 2 911 521 - VI/13
Starting the CD playerA CD is contained in the CD player.
1. Switch on the car radio if necessary.
2. Press the button.3. "CD"
Skipping to another track
Press the button repeatedly untilthe desired track is played.With the right knob:Turn the right knob until the desired track isplayed back.
Fast forward/reverse
Hold the button down.Tracks can be heard but are distorted.
Briefly playing and selecting a track"SC"All tracks are played briefly one after the other.To interrupt the function and select a track:"SC"
Random playback"RND"To end random playback:"RND"
Compressed audio filesCD players can play back CDs with compressedaudio data: MP3 and WMA.
Selecting a track1. "LIST"2. Select the desired directory using the right
knob.▷ : press the right knob to open a di‐
rectory.
▷ : press the right knob to close a di‐rectory.
3. Select other directories if you wish.4. Highlight the desired track and press the
right knob.You can scroll through the directories duringplayback.To change to the current track:"CURR"
Displaying information on the trackAny information stored on the currently se‐lected track can be displayed.
1. "LIST"2. "TRACK"
Ejecting a CD from the CD player
Press the button.The CD emerges slightly from the CD drive.
Operational displays▷ "Insert CD"
The CD slot is empty.▷ "Error CD"
The CD cannot be read or is defective.▷ "Temp. CD"
Operating temperature is too high.
Notes
CD playerDo not remove the coverThe CD players are officially designated
Class 1 laser products. Do not operate if thecover is damaged; otherwise, severe eye dam‐age can result.◀
Seite 129
Radio MINI Boost CD Entertainment
129Online Edition for Part no. 01 40 2 911 521 - VI/13
CDsUsing CDs▷ Do not use self-recorded CDs with la‐
bels applied, as these can becomedetached during playback due toheat buildup and can cause irrepara‐ble damage to the device.
▷ Only use round CDs with a standard diame‐ter of 4.7 in/12 cm and do not play CDswith an adapter, e.g., single CDs; otherwise,the CDs or the adapter may jam and no lon‐ger eject.◀
General malfunctions▷ The CD players have been optimized for
performance in vehicles. In some instancesthey may be more sensitive to faulty CDsthan stationary devices would be.
▷ If a CD cannot be played, first check if it hasbeen inserted correctly.
HumidityHigh levels of humidity can lead to condensa‐tion on the CD or the laser's scan lens, and tem‐porarily prevent playback.
Malfunctions with particular CDsIf malfunctions occur only with particular CDs,this can be due to one of the following causes:
Self-recorded CDs▷ Possible reasons for malfunctions with self-
recorded CDs are inconsistent data creationor recording processes, or poor quality orold age of the blank CD.
▷ Only label CDs on the upper side with a penintended for this purpose.
Damage▷ Avoid fingerprints, dust, scratches and
moisture.▷ Store CDs in a sleeve.
▷ Do not subject CDs to temperatures over50 ℃/122 ℉, high humidity, or direct sun‐light.
CDs with copy protectionCDs are often provided with a copy protectionfeature by the manufacturer. This can meanthat some CDs cannot be played or can only beplayed to a limited extent.
MACROVISIONThis product contains copyrighted technologythat is based on multiple registered US patentsand the intellectual property of the MacrovisionCorporation and other manufacturers. The useof this copy protection must be approved byMacrovision. Media protected by this product -unless otherwise agreed with Macrovision -may only be used for private purposes. Copyingof this technology is prohibited.
External devicesAUX-IN port
At a glance▷ For connecting audio devices, e.g., MP3
player. The sound is output on the vehicleloudspeakers.
▷ Recommendation: use medium tone andvolume settings on the audio device. Thetone depends on the quality of the audiofiles.
Seite 130
Entertainment Radio MINI Boost CD
130 Online Edition for Part no. 01 40 2 911 521 - VI/13
Connecting
The AUX-IN port is in the centerconsole.Connect the headphone connec‐tor or line-out connector of thedevice to the AUX-IN port.
Ensure that the connector is inserted all theway into the AUX-IN port.
Playback1. Connect the audio device, switch it on and
select a track on the audio device.
2. Press the button.3. "AUX"
VolumeThe volume of the sound output is dependenton the audio device. If this volume differsmarkedly from the volume of the other audiosources, it is advisable to adjust the volumes.
Adjusting the volume
1. Press the button.2. "AUX"3. "Vol-AUX"4. Connect the audio device, switch it on and
select a track on the audio device.
USB audio interface
At a glanceIt is possible to connect external audio devices.The sound is output on the vehicle loudspeak‐ers.
Connectors for external devices▷ Connection via USB audio interface: Apple
iPod/iPhone, USB devices, e.g., MP3 play‐ers, USB flash drives, or mobile phones thatare supported by the USB audio interface.
▷ External audio devices, e.g. MP3 player:connection via AUX-IN socket.
▷ Connection via snap-in adapter, refer topage 143, when equipped with the musicinterface for smartphones: Apple iPhone ormobile phones.Playback is only possible if no audio deviceis connected to the analog AUX-IN port.
Due to the large number of different audio de‐vices available on the market, it cannot be en‐sured that every audio device/mobile phone isoperable on the vehicle. Additional informationcan be obtained at www.mini.com/connectivityor from the service center.
Audio filesStandard audio files can be played back:▷ MP3.▷ WMA.▷ WAV (PCM).▷ AAC, M4A.▷ Playback lists: M3U, WPL, PLS.
File systemStandard file systems for USB devices are sup‐ported. The FAT 32 format is recommended.
Seite 131
Radio MINI Boost CD Entertainment
131Online Edition for Part no. 01 40 2 911 521 - VI/13
Connecting
The USB audio interface is in thecenter console.
Connection of Apple iPod/iPhone via USBaudio interfaceTo connect the iPod, use the special cableadapter for the Apple iPod. Additional informa‐tion can be obtained from the service center oron the Internet: www.mini.com/connectivityConnect the Apple iPod/iPhone with the AUX-IN port and USB interface.The Apple iPod/iPhone menu structure is sup‐ported by the USB audio interface.
Connection of a USB device via the USBaudio interfaceConnect using a flexible adapter cable to pro‐tect the USB audio interface and the USB deviceagainst physical damage.Connect the USB device to the USB interface.
Audio deviceConnect the headphone connector or line-outconnector of the device to the AUX-IN port ofthe USB audio interface.Ensure that the connector is inserted all theway into the AUX-IN port.
After connecting for the first timeInformation on all music tracks, e.g. artist ortype of music, as well as playback lists aretransmitted into the vehicle. This may takesome time, depending on the USB device andthe number of tracks.During transmission, the tracks can be called upvia the file directory.
Number of tracksInformation from up to four USB devices or forapprox. 20,000 tracks can be stored in the ve‐hicle. If a fifth device is connected or if morethan 20,000 tracks are stored, information onexisting tracks may be deleted.
Copy protectionMusic tracks with integrated Digital Rights Man‐agement (DRM) cannot be played.
Playback
1. Press the button.2. "IPOD" or "USB" or "AUX"
Changing the music track
Skipping to another trackIt is possible to skip to another track within theselected directory.
Press the button repeatedly untilthe desired track is played.With the right knob:Turn the right knob until the desired track isplayed back.
Fast forward/reverse
Hold the button down.Tracks can be heard but are distorted.
Seite 132
Entertainment Radio MINI Boost CD
132 Online Edition for Part no. 01 40 2 911 521 - VI/13
Random playback"RND"To end random playback: "RND"
Selecting a trackDepending on the connected device, the trackcan be selected via the following category:▷ "LIST": playback lists.▷ "GEN": musical genre.▷ "ART": artist.▷ "ALB": album.1. Select the desired category.2. If necessary, select the desired directory us‐
ing the right knob.▷ : press the right knob to open a di‐
rectory.▷ : press the right knob to close a di‐
rectory.3. Select other directories if you wish.4. Highlight the desired track and press the
right knob.You can scroll through the directories duringplayback.To change to the current track:"CURR"
Displaying information on the trackAny information stored on the currently se‐lected track can be displayed."TRACK"
Adjusting the volumeThe volume of the sound output is dependenton the audio device. If this volume differsmarkedly from the volume of the other audiosources, it is advisable to adjust the volumes.
1. "LEV"2. Turn the right knob until the desired vol‐
ume is set and press the knob.
NotesDo not expose the audio device to extreme en‐vironmental conditions, such as very high tem‐peratures; refer to the audio device operatinginstructions.Depending on the configuration of the audiofiles, e.g., bit rates greater than 256 kbit/s, thefiles may not play back correctly in each case.
Information on connection▷ It is only possible to connect one iPod/
iPhone to the vehicle at a time.▷ Playback from the iPod/iPhone is only pos‐
sible via the USB audio interface if a snap-inadapter is not used.
▷ The connected audio device is suppliedwith a max. power of 500 mA if supportedby the device. Therefore, do not addition‐ally connect the device to a socket in thevehicle; otherwise, playback may be com‐promised.
▷ Do not use force when plugging the con‐nector into the USB interface.
▷ Do not connect devices such as fans orlamps to the USB audio interface.
▷ Do not connect USB hard drives.▷ Do not use the USB audio interface to re‐
charge external devices.
Seite 133
Radio MINI Boost CD Entertainment
133Online Edition for Part no. 01 40 2 911 521 - VI/13
At a glance
Controls
Driving tips
Entertainment
Communication
Mobility
Reference
Online Edition for Part no. 01 40 2 911 521 - VI/13
TelephoneVehicle equipmentThis chapter describes all series equipment aswell as country-specific and special equipmentoffered for this model series.Therefore, it alsodescribes equipment that may not be found inyour vehicle, for instance due to the selectedspecial equipment or the country version. Thisalso applies to safety-related functions and sys‐tems.
At a glanceThe conceptMobile phones can be connected with the vehi‐cle via Bluetooth.After a suitable mobile phone is paired with thevehicle once, you can operate the mobilephone via the radio, the buttons on the steer‐ing wheel, and via voice activation.Bluetooth® is a registered trademark of Blue‐tooth® SIG, Inc.Certain functions may need to be enabled bythe mobile phone provider or service provider.
Using the mobile phone while drivingMake entries only when traffic and road
conditions allow. Do not hold the mobile phonein your hand while you are driving; use thehands-free system instead. If you do not ob‐serve this precaution, you can endanger the ve‐hicle occupants and other road users.◀
Snap-in adapterThe snap-in adapter is used to:▷ Hold the mobile phone.▷ Recharge the battery.▷ Connect the mobile phone to an outside
antenna of the vehicle.
This provides for better network receptionand consistent sound quality.
Do not operate a mobile phone that is con‐nected to the vehicle on the mobile phone key‐pad, as this may lead to a malfunction.
Approved mobile phonesDetails on which mobile phones with a Blue‐tooth interface are supported by the mobilephone preparation package can be obtained atwww.mini.com/connectivity.
NotesAt high temperatures, the charging function ofthe mobile phone may be limited and functionsmay not be executed.
Controls
1 Display.2 Function buttons for selecting the menu
items shown directly above them on thedisplay.
3 Redial, accept a call, start dialing, terminatea call and change to the Telephone menu.
4 ▷ Turn: highlight the menu item on thedisplay or set the value.
▷ Press: select the highlighted menu itemor store the setting.
Seite 136
Communication Telephone
136 Online Edition for Part no. 01 40 2 911 521 - VI/13
5 Opens the main menu.6 On/off, volume control.
Menu navigationSelecting menu itemsThere are two ways to select a menu item onthe display.
Using the right knob
▷ To mark a menu item: turn the right knob,arrow 2.
▷ To select a menu item: press the right knob,arrow 1.
Using the function buttonsPress the left or right side of the functionbutton under the menu item.
If only one menu item is displayed above thefunction button, press the middle of the button.
Representation in the Owner's Manual"…" Identifies radio display texts used to selectindividual functions.
Symbols on the display
Symbol Meaning
Function is selected.
Leave the menu, one menu back.
Symbol Meaning
Display additional menu items.
Scroll display. The list contains morethan two entries.
Reception of the wireless network:the display depends on the signalstrength.
Using the hands-free system.
Roaming is active.
Pairing/unpairing themobile phoneRequirements▷ The mobile phone is suitable, refer to
page 136.▷ The mobile phone is ready for operation.▷ Bluetooth is activated in the vehicle and on
the mobile phone.▷ Bluetooth presettings may need to be
made on the mobile phone, e.g., for a con‐nection without confirmation or visibility,refer to the mobile phone operating in‐structions.
▷ A number with at least four and a maxi‐mum of 16 digits was defined as the Blue‐tooth passkey. It is only required once forpairing.
▷ The ignition is switched on.
Activating/deactivating BluetoothBluetooth is not permitted everywhere. Complywith all safety guidelines and regulations.To activate the connection:
1. Switch on the radio ready state or the igni‐tion.
2. Press the button.
Seite 137
Telephone Communication
137Online Edition for Part no. 01 40 2 911 521 - VI/13
3. "PHONE"4. "BT-ON"To deactivate the connection again:
1. "BT"2. "BT-OFF"3. "YES"
Pairing and connectingPairing the mobile phoneTo avoid becoming distracted and posing
an unnecessary hazard both to your own vehi‐cle's occupants and to other road users, onlypair the mobile phone while the vehicle is sta‐tionary.◀
1. Switch on the radio ready state or the igni‐tion.
2. Press the button.3. "PHONE"4. "BT"5. "PAIR"
Turn the right knob to display the Bluetoothname of your vehicle.
6. To perform additional steps on the mobilephone, refer to the mobile phone operatinginstructions: for instance, search for or con‐nect the Bluetooth device or a new device.The Bluetooth name of the vehicle appearson the mobile phone display.
7. Select the Bluetooth name of the vehicle onthe mobile phone display.You are prompted by the radio or mobilephone to enter the same Bluetooth pass‐key.
8. Enter the passkey on the mobile phone andconfirm it.
9. "ADD"10. Enter the same passkey on the radio using
the function buttons and confirm it.
To delete the last digit: "DELETE"11. "OK"
Press twice if necessary.If pairing was successful, the mobile phone ap‐pears on the radio display.Four mobile phones can be paired with the ve‐hicle at once.If pairing was unsuccessful: What to do if..., re‐fer to page 139.
Repeating the pairing procedure/helpIf pairing failed:
1. "REPEAT"2. Repeat steps 6 to 10.To display the Customer Relations phone num‐ber: "CALLS"Turn the right knob to display the Customer Re‐lations phone number and information neededfor pairing.
Following the initial pairing▷ The mobile phone is detected/connected in
the vehicle within a short period of timewhen the engine is running or the ignitionis switched on.
▷ The phone book entries of the telephonestored on the SIM card or mobile phone aretransmitted to the vehicle after detection,depending on the mobile phone.
▷ Specific settings may be necessary in somemobile phones, e.g., authorization or a se‐cure connection; refer to the mobile phoneoperating instructions.
Connecting a particular mobile phone1. Switch on the radio ready state or the igni‐
tion.
2. Press the button.3. "PHONE"4. "BT"
Seite 138
Communication Telephone
138 Online Edition for Part no. 01 40 2 911 521 - VI/13
5. Turn the right knob until the mobile phoneto be connected is displayed.
6. "PRIO"Press the button repeatedly until the de‐sired position is reached.
Unpairing the mobile phone1. Switch on the radio ready state or the igni‐
tion.
2. Press the button.3. "PHONE"4. "BT"5. Turn the right knob until the mobile phone
to be unpaired is displayed.6. "DELETE"7. "YES"
What to do if...Information on suitable mobile phones, refer topage 136.The mobile phone could not be paired or con‐nected.▷ Is Bluetooth activated in the vehicle and on
the mobile phone? Activate Bluetooth onthe vehicle and on the mobile phone.
▷ Do the Bluetooth passkeys on the mobilephone and the vehicle match? Enter thesame passkey on the mobile phone and onthe radio.
▷ Did it take longer than 30 seconds to enterthe passkey? Repeat the pairing procedure.
▷ Are too many Bluetooth devices connectedto the mobile phone or vehicle? Delete con‐nections with other devices if necessary.
▷ Is the mobile phone in power-save mode ordoes it have only a limited remaining bat‐tery life? Charge the mobile phone in thesnap-in adapter or via the charging cable.
▷ Depending on the mobile phone, it is possi‐ble that only one mobile phone can be con‐nected to the vehicle. Unpair the connected
mobile phone from the vehicle and pairand connect only one mobile phone.
The mobile phone no longer reacts?▷ Switch the mobile phone off and on again.▷ Is the ambient temperature too high or
low? Do not expose the mobile phone toextreme environmental conditions.
No phone book entries or only some phonebook entries are displayed, or they are incom‐plete.▷ Transmission of the phone book entries is
not yet complete.▷ It is possible that only the phone book en‐
tries of the mobile phone or the SIM cardare transmitted.
▷ It may not be possible to display phonebook entries with special characters.
▷ The number of phone book entries to bestored is too high.
▷ Is the data volume of the contact too large,e. g., due to stored information such asnotes? Reduce the data volume of the con‐tact.
The phone connection quality is poor.▷ The strength of the Bluetooth signal on the
mobile phone can be adjusted, dependingon the mobile phone.
▷ Insert the mobile phone into the snap-inadapter or place it in the area of the centerconsole.
▷ Adjust the volume of the microphone andloudspeakers.
If all points in this list have been checked andthe required function is still not available, con‐tact Customer Relations or the service center.
Controls▷ Accept/reject a call.▷ Dial a phone number.▷ Dial a phone number from the phone book.
Seite 139
Telephone Communication
139Online Edition for Part no. 01 40 2 911 521 - VI/13
▷ Dial a stored phone number, such as fromthe list of accepted calls.
▷ End the call.When the ignition and the radio ready state areswitched off, such as after the remote control isremoved, an existing call can be continued forup to 25 minutes on the hands-free system.
Adjusting the volume
Turn the knob until the desired volume is se‐lected. The setting is stored for the remote con‐trol currently in use.
The ringer volume of incoming calls and the callvolume can be adjusted independently.When a call is placed using the hands-free sys‐tem, the audio sources are muted.
Switching the microphone to muteWhen a call is active, the microphone can bemuted."MUTE"A microphone that has been switched to muteis automatically reactivated when a new con‐nection is established.
Incoming call
Receiving callsIf the number of the caller is stored in thephone book and is transmitted by the network,the name of the contact is displayed. Other‐wise, only the phone number is displayed.
Accepting a callBriefly press the button on the steeringwheel or radio.
or"YES"
Rejecting a call"NO"
Ending a callBriefly press the button on the steeringwheel or radio.
or"END"
Entering a phone number
Dialing a number1. Switch on the radio ready state or the igni‐
tion.
2. Press the button.3. "PHONE"4. "#"5. Enter the desired phone number on the
buttons 0–9.To delete the last digit: "DEL"
6. Briefly press the button on thesteering wheel or radio.orPress the right knob to dial the phone num‐ber.
Phone bookDialed phone numbers, incoming calls and en‐tries in the phone book are stored on lists if themobile phone is connected to the vehicle viaBluetooth.Five lists are available:
Seite 140
Communication Telephone
140 Online Edition for Part no. 01 40 2 911 521 - VI/13
▷ "A-Z"Entries of the phone book of the SIM cardor of the mobile phone, which consist of aname and phone number, are sorted in al‐phabetical order.
▷ "TOP8"The Top 8 list contains the eight phonenumbers that were dialed most frequently.
▷ "LAST8"The last eight phone numbers that were di‐aled are stored. The phone number dialedlast is at the top of the list.
▷ "CALLS"The phone numbers of the last eight ac‐cepted calls are stored. For this to be possi‐ble, it must be possible to transmit thephone number of the caller.
▷ "MISSED"The phone numbers of the last eight callsthat were not accepted are stored. For thisto be possible, it must be possible to trans‐mit the phone number of the caller.
Dialing a phone number from the phonebookThe list A-Z is available for phone book entries.If entries with different names but the samephone number are transferred to the vehiclefrom the mobile phone, only one entry is dis‐played.The display of the phone book entries on theradio may differ from the display on the mobilephone, such as the order of the first and lastnames.
1. Switch on the radio ready state or the igni‐tion.
2. Press the button.3. "PHONE"4. "A-Z"5. The arrows indicate that additional
letters can be displayed.
Turn the right knob to display additionalletters if necessary.
6. Turn the right knob to select the first letterof the entry.
7. Select the entry with the function button.The phone number is dialed.
To display all entries:
1. Turn the right knob to select the first letterof the entry and press the knob.
2. Turn the right knob to select the desiredentry and press the knob.or
Press the button on the steeringwheel or radio to dial the number.
The phone number is dialed.
Editing and dialing a phone numberfrom the phone bookYou can edit the phone number of an entry be‐fore making a call. This change is not stored inthe phone book.
1. Selecting an entry.2. "EDIT"3. To delete a digit: "DEL"4. Enter additional digits on the buttons 0–9.5. Press the right knob to dial the phone num‐
ber.
Dialing a phone number from the phonebook using the buttons on the steeringwheel
1. Press and hold the button to dis‐play the Telephone menu.
2. Press the arrow buttons on the steeringwheel to leaf through the phone book.
3. Press the button to dial the phonenumber.
Seite 141
Telephone Communication
141Online Edition for Part no. 01 40 2 911 521 - VI/13
Dialing a phone number stored in a listTo select an entry and establish a connection:
1. Switch on the radio ready state or the igni‐tion.
2. Press the button.3. "PHONE"4. Select a list, for instance "TOP8"5. Turn the right knob to select an entry and
press the knob to dial the phone number.
Deleting an individual entry1. Select an entry from the list.2. "DEL"
DTMF suffix dialingDTMF suffix dialing can be used for gaining ac‐cess to network services or for controlling devi‐ces, e.g., to make a remote inquiry of an an‐swering machine. The DTMF code is needed forthis purpose.This function is only available if a connectionexists and if the hands-free system is beingused.
1. "KEYPAD"2. Enter the DTMF code on the buttons 0–9.3. If necessary, press and hold the function
button on the right or left to enter specialcharacters.
Displaying the call durationDuring a call:"DURAT"
Hands-free system
General informationCalls that are being made on the hands-freesystem can be continued on the mobile phoneand vice versa.
From the mobile phone to the hands-free systemCalls that were begun outside of the Bluetoothrange of the vehicle can be continued on thehands-free system with the ignition switchedon.Depending on the mobile phone, the systemautomatically switches to the hands-free sys‐tem.If the system does not switch over automati‐cally, follow the instructions on the mobilephone display; refer also to the mobile phoneoperating instructions.
From the hands-free system to themobile phoneCalls that are made on the hands-free systemcan in some cases be continued on the mobilephone; this depends on the mobile phone.Follow the instructions on the mobile phonedisplay; refer also to the mobile phone operat‐ing instructions.
MINI phone numbersWhen the ignition is switched on, various serv‐ice phone numbers can be displayed.▷ "Road Assist": Roadside Assistance, if help
is required in the event of a breakdown.▷ "Serv. Appt.": MINI service center, if a serv‐
ice appointment needs to be arranged.▷ "Cust Relat": Customer Relations, for infor‐
mation on all aspects of your vehicle.
Displaying the phone numbers1. Switch on the radio ready state or the igni‐
tion.
2. Press the button.3. "MINI"4. Turn the right knob until the desired phone
number is displayed.
Seite 142
Communication Telephone
142 Online Edition for Part no. 01 40 2 911 521 - VI/13
Snap-in adapterGeneral informationMore information on compatible snap-inadapters that support the functions of the mo‐bile phone is available at the service center.
NotesAt high temperatures, the charging function ofthe mobile phone may be limited and functionsmay not be executed.When using the mobile phone via the vehicle,note the operating instructions of the mobilephone.
Installation positionIn the center armrest.
Inserting/removing the snap-in adapter1. Press button 1 and remove the cover.
2. Insert the snap-in adapter at the front, ar‐row 1, and press down, arrow 2, until it en‐gages.
3. To remove the snap-in adapter: press but‐ton 1.
Inserting the mobile phone1. Depending on the mobile phone, remove
the protective cap from the antenna con‐nector and from the USB connection of themobile phone.
2. With the buttons facing up, slide the mobilephone up toward the electrical contactsand press it down until it engages.
The battery is charged beginning with the radioready state of the vehicle.
Seite 143
Telephone Communication
143Online Edition for Part no. 01 40 2 911 521 - VI/13
Removing the mobile phone
Press the button and remove the mobilephone.
Seite 144
Communication Telephone
144 Online Edition for Part no. 01 40 2 911 521 - VI/13
At a glance
Controls
Driving tips
Entertainment
Communication
Mobility
Reference
Online Edition for Part no. 01 40 2 911 521 - VI/13
RefuelingVehicle equipmentThis chapter describes all series equipment aswell as country-specific and special equipmentoffered for this model series.Therefore, it alsodescribes equipment that may not be found inyour vehicle, for instance due to the selectedspecial equipment or the country version. Thisalso applies to safety-related functions and sys‐tems.
General informationRefuel promptlyAt the latest, refuel at a range below
30 miles/50 km; otherwise, the engine functionis not ensured and damage may occur.◀
NotesSwitch off the engine before refuelingAlways switch off the engine before refu‐
eling; otherwise, fuel cannot be added to thetank and a message will be displayed.◀
Observe when handling fuel▷ Take all precautionary measures and
observe all applicable regulationswhen handling fuel.
▷ Do not carry any spare fuel containers inyour vehicle. They can develop a leak andcause an explosion or cause a fire in theevent of an accident.◀
Fuel capOpening1. Open fuel filler flap.
2. Turn the fuel cap counterclockwise.3. Place the fuel cap in the bracket attached
to the fuel filler flap.
Closing1. Fit the fuel cap and turn it clockwise until
you clearly hear a click.2. Close the fuel filler flap.
Do not pinch the retaining strapDo not pinch the retaining strap attached
to the cap; otherwise, the cap cannot be closedproperly and fuel vapors can escape.◀
A message is displayed if the cap is loose ormissing.
Manually unlocking fuel filler flapIn the event of a malfunction, the fuel filler flapcan be released manually:MINI Countryman:
Seite 148
Mobility Refueling
148 Online Edition for Part no. 01 40 2 911 521 - VI/13
MINI Paceman:
1. Open the cargo area trim, arrow.2. Pull the green knob with the gas pump
symbol.This opens the fuel filler flap.
Observe the followingwhen refuelingWhen refueling, insert the filler nozzle com‐pletely into the filler pipe. Lifting up the fuelpump nozzle during refueling causes:▷ Premature pump shutoff.▷ Reduced efficiency in the fuel-vapor recov‐
ery system.The fuel tank is full after refueling is resumedtwice after the filler nozzle switches off for thefirst time.
Do not overfill the fuel tankDo not overfill the fuel tank; otherwise,
escaping fuel may harm the environment ordamage the vehicle.◀
Handling fuelsFollow the safety instructions provided at
gas stations; otherwise, there is a danger ofpersonal injury and property damage.◀
Fuel tank capacityApprox. 12.3 US gal/47 liters, including a re‐serve capacity of 2.1 US gal/8 liters.
Seite 149
Refueling Mobility
149Online Edition for Part no. 01 40 2 911 521 - VI/13
FuelVehicle equipmentThis chapter describes all series equipment aswell as country-specific and special equipmentoffered for this model series.Therefore, it alsodescribes equipment that may not be found inyour vehicle, for instance due to the selectedspecial equipment or the country version. Thisalso applies to safety-related functions and sys‐tems.
Fuel recommendationGasolineFor the best fuel economy, the gasoline shouldbe sulfur-free or very low in sulfur content.Do not use fuels that are labeled at the fuelpump as containing metals.
Only refuel with lead-free gasoline with‐out metal additives
Do not refuel with leaded gasoline or gasolinewith metal additives, e. g., manganese or iron;otherwise, the catalytic converter and othercomponents will be permanently damaged.◀
Fuels with a maximum ethanol content of10 %, i.e., E10, may be used for refueling.The ethanol should fulfill the following qualitystandards:US: ASTM 4806–xxCAN: CGSB-3.511–xxxx: always adhere to the currently applicablestandard.
Do not refuel with ethanol E85Do not refuel with E85, i.e., fuel with an
ethanol content of 85 %, or with Flex Fuel, asthis would damage the engine and fuel supplysystem.◀
The engine is knock controlled. Therefore, youcan refuel with different gasoline qualities.
Gasoline qualityThe manufacturer of your MINI recommends:▷ AKI 91.▷ John Cooper Works AKI 93.
Minimum fuel gradeThe manufacturer of your MINI recommendsAKI 89.
Minimum fuel gradeDo not fill up with fuel below the speci‐
fied minimum quality; otherwise, the enginemay not run properly.◀
If you use gasoline with this minimum AKI rat‐ing, the engine may produce knocking soundswhen starting at high outside temperatures.This has no effect on the engine life.
Minimum fuel gradeThe use of poor-quality fuels may result in
harmful engine deposits or damage. Addition‐ally, problems relating to drivability, startingand stalling, especially under certain environ‐mental conditions such as high ambient tem‐perature and high altitude, may occur.If drivability problems are encountered, we rec‐ommend switching to a high quality gasolinebrand and a higher octane grade — AKI num‐ber — for a few tank fills. To avoid harmful en‐gine deposits, it is highly recommended to pur‐chase gasoline from BP or Top Tier retailers.Failure to comply with these recommendationsmay result in the need for unscheduled mainte‐nance.◀
Seite 150
Mobility Fuel
150 Online Edition for Part no. 01 40 2 911 521 - VI/13
Wheels and tiresVehicle equipmentThis chapter describes all series equipment aswell as country-specific and special equipmentoffered for this model series.Therefore, it alsodescribes equipment that may not be found inyour vehicle, for instance due to the selectedspecial equipment or the country version. Thisalso applies to safety-related functions and sys‐tems.
Tire inflation pressureSafety informationIt is not merely the tires' service life, but alsodriving comfort and, to a great extent, drivingsafety that depend on the condition of the tiresand the maintenance of the specified tire pres‐sure.
Checking the pressureCheck the tire inflation pressure regularlyRegularly check the tire inflation pressure
and correct it as needed: at least twice a monthand before a long trip. If you fail to observe thisprecaution, you may be driving on tires with in‐correct tire pressures, a condition that may notonly compromise your vehicle's driving stabil‐ity, but also lead to tire damage and the risk ofan accident.Do not drive with depressurized or flat tires, ex‐cept for run-flat tires. A flat tire will seriouslyimpair your vehicle's handling and braking re‐sponse. Attempts to drive on a flat tire can leadto a loss of control over the vehicle.◀
Only check the tire inflation pressure when thetires are cold. This means after a maximum of1.25 miles/2 km driving or when the vehiclehas been parked for at least 2 hours. When the
tires are warm, the tire inflation pressure ishigher.After correcting the tire inflation pressure, resetthe Tire Pressure Monitor, refer to page 78or reinitialize the Flat Tire Monitor, refer topage 75.
To check the inflation pressure, there is a valveextension behind the bumper.
Pressure specificationsThe tables below provide all the correct infla‐tion pressures for the specified tire sizes at am‐bient temperature.The inflation pressures apply to the tire sizesapproved and tire brands recommended by themanufacturer of the MINI; a list of these isavailable from the service center.For correct identification of the right tire infla‐tion pressures, observe the following:▷ Tire sizes of your vehicle▷ Maximum allowable driving speed
Tire inflation pressures for driving up to100 mph or 160 km/hFor normal driving up to 100 mph/160 km/h,adjust pressures to the respective tire inflationpressures listed on the following pages in thecolumn for traveling speeds up to 100 mph/160 km/h to achieve optimum driving comfort.These tire inflation pressures can also be foundon the driver's side door pillar when the driver'sdoor is open.
Seite 152
Mobility Wheels and tires
152 Online Edition for Part no. 01 40 2 911 521 - VI/13
MINI Countryman:
MINI Paceman:
Do not exceed the maximum permissiblespeed
The maximum permissible speed for these tirepressures is 100 mph/160 km/h. Do not exceedthis speed; otherwise, tire damage and acci‐dents may occur.◀
Tire inflation pressures for drivingabove 100 mph or 160 km/h
Adjust the tire inflation pressuresTo drive at maximum speeds in excess of
100 mph/160 km/h, adjust pressures to the re‐spective tire inflation pressures listed on thefollowing pages in the column for travelingspeeds including those exceeding 100 mph or160 km/h. Otherwise, tire damage and acci‐dents could occur.◀
Observe all national and local maximum speedlimits; otherwise, violations of the laws couldoccur.
Tire inflation pressures for MINI Countryman Cooper
Tire size Pressure specifications in bar/PSI
Traveling speeds of up to100 mph/160 km/h
Traveling speeds above100 mph/160 km/
All pressure specifications in the tableare indicated in bar/PSI with coldtires.Cold = ambient temperature
195/60 R 16 89 H M+S Std205/55 R 17 91 H M+S RSC205/55 R 17 91 H M+S A/S RSC205/55 R 17 91 V RSC225/45 R 18 91 V RSC225/40 R 19 89 V RSC
2.2/32 2.2/32 2.4/35 2.4/35
More details on the permissible load and weights, refer to page 205.
Seite 153
Wheels and tires Mobility
153Online Edition for Part no. 01 40 2 911 521 - VI/13
Tire inflation pressures for MINI Countryman Cooper S/Countryman Cooper S ALL4
Tire size Pressure specifications in bar/PSI
Traveling speeds of up to100 mph/160 km/h
Traveling speeds above100 mph/160 km/
All pressure specifications in the tableare indicated in bar/PSI with coldtires.Cold = ambient temperature
195/60 R 16 89 H M+S Std205/55 R 17 91 H M+S RSC205/55 R 17 91 H M+S A/S RSC205/55 R 17 91 V RSC225/45 R 18 91 V RSC225/40 R 19 89 V RSC
2.2/32 2.2/32 2.6/38 2.6/38
More details on the permissible load and weights, refer to page 205.
Tire inflation pressures for MINI Countryman John Cooper Works
Tire size Pressure specifications in bar/PSI
Traveling speeds of up to100 mph/160 km/h
Traveling speeds above100 mph/160 km/
All pressure specifications in the tableare indicated in bar/PSI with coldtires.Cold = ambient temperature
195/60 R 16 89 H M+S Std205/55 R 17 91 H M+S RSC205/55 R 17 91 H M+S A/S RSC225/45 R 18 91 V RSC225/40 R 19 89 V RSC
2.4/35 2.4/35 2.6/38 2.6/38
More details on the permissible load and weights, refer to page 205.
Seite 154
Mobility Wheels and tires
154 Online Edition for Part no. 01 40 2 911 521 - VI/13
Tire inflation pressures for MINI Paceman Cooper
Tire size Pressure specifications in bar/PSI
Traveling speeds of up to100 mph/160 km/h
Traveling speeds above100 mph/160 km/
All pressure specifications in the tableare indicated in bar/PSI with coldtires.Cold = ambient temperature
195/60 R 16 89 H M+S Std205/55 R 17 91 H M+S RSC205/55 R 17 91 H M+S A/S RSC205/55 R 17 91 V RSC225/45 R 18 91 V RSC225/40 R 19 89 V RSC
2.2/32 2.2/32 2.4/35 2.4/35
More details on the permissible load and weights, refer to page 206.
Tire inflation pressures for MINI Paceman Cooper S / Paceman Cooper S ALL4
Tire size Pressure specifications in bar/PSI
Traveling speeds of up to100 mph/160 km/h
Traveling speeds above100 mph/160 km/
All pressure specifications in the tableare indicated in bar/PSI with coldtires.Cold = ambient temperature
195/60 R 16 89 H M+S Std205/55 R 17 91 H M+S RSC205/55 R 17 91 H M+S A/S RSC205/55 R 17 91 V RSC225/45 R 18 91 V RSC225/40 R 19 89 V RSC
2.2/32 2.2/32 2.6/38 2.6/38
More details on the permissible load and weights, refer to page 206.
Seite 155
Wheels and tires Mobility
155Online Edition for Part no. 01 40 2 911 521 - VI/13
Tire inflation pressures for MINI Paceman John Cooper Works
Tire size Pressure specifications in bar/PSI
Traveling speeds of up to100 mph/160 km/h
Traveling speeds above100 mph/160 km/
All pressure specifications in the tableare indicated in bar/PSI with coldtires.Cold = ambient temperature
195/60 R 16 89 H M+S Std205/55 R 17 91 H M+S RSC205/55 R 17 91 H M+S A/S RSC225/45 R 18 91 V RSC225/40 R 19 89 V RSC
2.4/35 2.4/35 2.7/39 2.7/39
More details on the permissible load and weights, refer to page 206.
Tire identification marksKnowledge of the labeling on the side of thetire makes it easier to identify and choose theright tires.
Tire sizeExample: 225/45 R 17 91 V225: nominal width in mm45: aspect ratio in %R: radial tire code17: rim diameter in inches91: load rating, not for ZR tires
Speed letterQ = up to 100 mph/160 km/hT = up to 118 mph/190 km/hH = up to 131 mph/210 km/hV = up to 150 mph/240 km/hW = up to 167 mph/270 km/hY = up to 186 mph/300 km/h
Tire Identification NumberTires with DOT codes meet the guidelines ofthe U.S. Department of Transportation.DOT code:DOT xxxx xxx 1012xxxx: manufacturer code for the tire brandxxx: tire size and tire design1012: tire age
Uniform Tire Quality GradingQuality grades can be found where applicableon the tire sidewall between tread shoulderand maximum section width. For example:Treadwear 200 Traction AATemperature A
DOT Quality GradesTreadwearTraction AA A B CTemperature A B C
Seite 156
Mobility Wheels and tires
156 Online Edition for Part no. 01 40 2 911 521 - VI/13
Conform to Federal Safety RequirementsAll passenger car tires must conform to
Federal Safety Requirements in addition tothese grades.◀
TreadwearThe treadwear grade is a comparative ratingbased on the wear rate of the tire when testedunder controlled conditions on a specified gov‐ernment test course. For example, a tire graded150 would wear one and one-half (1 1/2) timesas well on the government course as a tiregraded 100. The relative performance of tiresdepends upon the actual conditions of theiruse, however, and may depart significantlyfrom the norm due to variations in driving hab‐its, service practices and differences in roadcharacteristics and climate.
TractionThe traction grades, from highest to lowest, areAA, A, B, and C.Those grades represent the tire’s ability to stopon wet pavement as measured under control‐led conditions on specified government testsurfaces of asphalt and concrete. A tire markedC may have poor traction performance.The traction grade assigned to this tire is basedon straight-ahead braking traction tests, anddoes not include acceleration, cornering, hy‐droplaning, or peak traction characteristics.
TemperatureThe temperature grades are A, the highest, B,and C, representing the tire’s resistance to thegeneration of heat and its ability to dissipateheat when tested under controlled conditionson a specified indoor laboratory test wheel.Sustained high temperature can cause the ma‐terial of the tire to degenerate and reduce tirelife, and excessive temperature can lead tosudden tire failure. The grade C corresponds toa level of performance which all passenger cartires must meet under the Federal Motor Vehi‐
cle Safety Standard No. 109. Grades B and Arepresent higher levels of performance on thelaboratory test wheel than the minimum re‐quired by law.
Temperature grade for this tireThe temperature grade for this tire is es‐
tablished for a tire that is properly inflated andnot overloaded. Excessive speed, underinfla‐tion, or excessive loading, either separately orin combination, can cause heat buildup andpossible tire failure.◀
RSC – Run-flat tiresThe symbol identifying run-flat tires is a circlewith the letters RSC on the sidewall, refer topage 160.
M+SWinter and all-season tires.These have better winter properties thansummer tires.
XLDesignation for specially reinforced tires.
Tire treadSummer tiresThe tread depth should not be less than0.12 in/3 mm, although European legislation,for example, requires a minimum tread depthof only 0.063 in/1.6 mm. At tread depths lessthan 0.12 in/3 mm, there is a great danger ofhydroplaning even in low water depths and atraised speeds.
Winter tiresThe suitability of winter tires for winter drivingis reduced noticeably when their tread depthbecomes less than 0.16 in/4 mm.
Seite 157
Wheels and tires Mobility
157Online Edition for Part no. 01 40 2 911 521 - VI/13
Minimum tread depth
Wear indicators in the tread base are distrib‐uted around the circumference of the tire andare marked on the tire sidewall with TWI, TreadWear Indicator. When the tire tread has beenworn down to the wear indicators, a tread hasreached a depth of 0.063 in/1.6 mm.
Tire damageGeneral informationInspect your tires often for damage, foreign ob‐jects lodged in the tread, and tread wear.
NotesDriving over rough or damaged road surfaces,as well as debris, curbs and other obstacles cancause serious damage to wheels, tires and sus‐pension parts. This is more likely to occur withlow-profile tires, which provide less cushioningbetween the wheel and the road. Be careful toavoid road hazards and reduce your speed, es‐pecially if your vehicle is equipped with low-profile tires.Indications of tire damage or other vehicle de‐fects:▷ Unusual vibrations during driving.▷ Unusual handling such as a strong ten‐
dency to pull to the left or right.Damage can be caused by driving over curbs,road damage and similar situations.
In case of tire damageIf there are indications of tire damage, re‐
duce your speed immediately and have thewheels and tires checked right away; other‐wise, there is the increased risk of an accident.Drive carefully to the next service center or tireshop.If necessary, have the vehicle towed.Otherwise, tire damage can present a life-threatening hazard to vehicle occupants andother road users.◀
Repair of tire damageFor safety reasons, the manufacturer of
your vehicle recommends that you do not havedamaged tires repaired; they should be re‐placed. Otherwise, damage can occur as a re‐sult.◀
Tire ageRecommendationFor several reasons, among other things be‐cause of beginning brittleness, the manufac‐turer of your MINI recommends mounting newtires at the latest after six years, regardless ofthe actual wear.
Manufacture dateThe date of manufacture of the tires is specifiedin the tire label:DOT … 2313: the tire was manufactured inweek 23 of 2013.
Seite 158
Mobility Wheels and tires
158 Online Edition for Part no. 01 40 2 911 521 - VI/13
Changing wheels andtiresMounting
Information on mounting tiresHave mounting and balancing performed
only by a service center or tire specialist.If this work is not carried out properly, there isthe danger of subsequent damage and relatedsafety hazards.◀
Wheel and tire combinationInformation on the right wheel and tire combi‐nation and rim version for your vehicle can beobtained from the service center.Incorrect wheel and tire combinations impairthe function of a variety of systems such as ABSor DSC.To maintain good handling and vehicle re‐sponse, use only tires with a single tread con‐figuration from a single manufacturer.Following tire damage, have the original wheeland tire combination remounted on the vehicleas soon as possible.
Approved wheels and tiresThe manufacturer of your vehicle recom‐
mends that you use only wheels and tires thathave been approved for your particular vehiclemodel.For example, despite having the same officialsize ratings, variations can lead to body contactand with it, the risk of severe accidents.The manufacturer of your vehicle cannot evalu‐ate non-approved wheels and tires to deter‐mine if they are suited for use, and thereforecannot ensure the operating safety of the vehi‐cle if they are mounted.◀
Wheels with electronics for TPM TirePressure MonitorWhen mounting new tires or changing fromsummer to winter tires or vice versa, only usewheels with TPM electronics; otherwise, theTire Pressure Monitor will not be able to detecta flat tire, refer to page 77. Your service centerwill be glad to advise you.
Recommended tire brands
For each tire size, the manufacturer of your ve‐hicle recommends certain tire brands. Theseare indicated by the clearly visible marking onthe tire sidewall.With proper use, these tires meet the higheststandards for safety and handling.
Retreaded tiresThe manufacturer of your vehicle does not rec‐ommend the use of retreaded tires.
Retreaded tiresPossibly substantial variations in the de‐
sign and age of the tire casing structures canlimit service life and have a negative impact onroad safety.◀
Winter tiresThe manufacturer of your vehicle recommendswinter tires for winter roads or at temperaturesbelow +45 ℉/+7 ℃.Although so-called all-season M+S tires do pro‐vide better winter traction than summer tires,they do not provide the same level of perform‐ance as winter tires.
Seite 159
Wheels and tires Mobility
159Online Edition for Part no. 01 40 2 911 521 - VI/13
Maximum speed of winter tiresIf the maximum speed of the vehicle is higherthan the permissible speed for the winter tires,then display a corresponding sign in the field ofvision. You can obtain this sign from the tirespecialist or from your service center.
Maximum speed for winter tiresDo not exceed the maximum speed for
the winter tires; otherwise, tire damage and ac‐cidents can occur.◀
Run-flat tiresWhen mounting new tires or changing fromsummer to winter tires or vice versa, use run-flat tires for your own safety. Also, a compactwheel is not available in case of a flat tire. Yourservice center will be glad to advise you.
Rotating wheels between axlesDifferent wear patterns occur on the front andrear axles, depending on the individual condi‐tions of use.To ensure even wear on the tires, the wheelscan be rotated between the axles. Your servicecenter will be glad to advise you.After changing the tires, check the tire inflationpressure and correct it if necessary.
StorageStore wheels and tires in a cool, dry place withas little exposure to light as possible.Always protect tires against all contact with oil,grease and fuels.Do not exceed the maximum tire inflation pres‐sure indicated on the side wall of the tire.
Run-flat tiresLabel
The symbol identifying run-flat tires is a circlewith the letters RSC on the sidewall.Run-flat tires are tires with special rims thatsupport themselves for a limited period of time.The sidewall reinforcement ensures that thetire can continue to be used to a limited extentif it has lost pressure and even if it has becomecompletely depressurized.For continued driving in the event of a flat tire,refer to page 76.
Correcting a flat tireSafety measures in case of a breakdown▷ Park the vehicle as far as possible
from passing traffic and on solidground. Switch on the hazard warn‐ing system.
▷ Let the steering wheel lock engage with thewheels in the straight-ahead position, setthe handbrake, and engage first gear or re‐verse, or engage selector lever position P.
▷ Have all vehicle occupants get out of thevehicle and ensure that they remain out‐side the immediate area in a safe place,such as behind a guardrail.
Seite 160
Mobility Wheels and tires
160 Online Edition for Part no. 01 40 2 911 521 - VI/13
▷ If a warning triangle or portable hazardwarning lamp is required, set it up on theroadside at an appropriate distance fromthe rear of the vehicle. Comply with allsafety guidelines and regulations.◀
The procedure to correct a flat tire depends onthe equipment in the vehicle:▷ Run-flat tires, refer to page 160.▷ MINI Mobility System, refer to page 161.
MINI Mobility SystemNotes▷ Follow the instructions on using the Mobi‐
lity System found on the compressor andsealant bottle.
▷ Use of the Mobility System may be ineffec‐tive if tire damage is greater than approx.1/8 in/4 mm in size.
▷ Contact the nearest service center if the tirecannot be made drivable.
▷ If possible, do not remove foreign bodiesthat have penetrated the tire.
▷ Pull the speed limit sticker off the sealantbottle and apply it to the steering wheel.
Sealant and compressor
1 Sealant bottle and speed limit sticker2 Filling hose
Note the use-by date on the sealant bottle.
3 Holder for the sealant bottle4 Compressor5 Connector and cable for the lighter socket/
socket in passenger compartment 97.6 Connection hose for connecting the com‐
pressor and sealant bottle or the compres‐sor and wheel
7 On/off switch8 Pressure gauge for displaying the tire infla‐
tion pressure9 Release button for reducing the tire infla‐
tion pressure
The connector, cable, and connecting hose arestowed in the compressor housing.
Using the Mobility SystemTo repair a flat tire with the Mobility System,proceed as follows:▷ Filling the tire with sealant▷ Distributing the sealant▷ Correcting the tire inflation pressure
Filling the tire with sealantAdhere to the specified sequenceAdhere to the specified sequence of the
steps; otherwise, sealant may escape underhigh pressure.◀
1. Shake the sealant bottle.2. Pull the connection hose 6 fully out of the
compressor housing and screw it onto thesealant bottle connection. Ensure that theconnection hose is not kinked.
Seite 161
Wheels and tires Mobility
161Online Edition for Part no. 01 40 2 911 521 - VI/13
3. Insert the sealant bottle into the compres‐sor housing in a vertical position.
4. Unscrew the dust cap off of the valve of thedefective wheel and screw the filling hose 2of the sealant bottle onto the valve.
5. Ensure that the compressor is switched off.6. Insert connector 5 into the lighter socket/
socket in the passenger compartment, referto page 97.
7. When the engine is running:Switch on the compressor and let it run forapprox. 3 to 8 minutes to fill sealant intothe tire and achieve a tire inflation pressureof approx. 1.8 bar/26 psi.While sealant is being filled, the inflationpressure may intermittently rise to approx.5 bar/73 psi. Do not switch off the com‐pressor in this phase.
8. Switch off the compressor.Do not allow the compressor to run toolong
Do not allow the compressor to run longer than10 minutes; otherwise, the device will overheatand may be damaged.◀
If an air pressure of 1.8 bar/26 psi is notreached:
1. Unscrew the filling hose 2 from the wheeland drive forward and back approx.33 ft/10 m to evenly distribute the sealantin the tire.
2. Inflate the tire again using the compressor.
If the inflation pressure of 1.8 bar/26 psi is stillnot reached, the tire is too heavily damaged.Contact the nearest service center.
Stowing the Mobility System1. Unscrew the filling hose 2 of the sealant
bottle from the wheel.2. Unscrew the compressor connection hose 6
from the sealant bottle.3. Connect the filling hose 2 of the sealant
bottle with the free connector on the seal‐ant bottle.This prevents left-over sealant from escap‐ing from the bottle.
4. Wrap the empty sealant bottle in suitablematerial to avoid dirtying the cargo area.
5. Stow the Mobility System back in the vehi‐cle.
Distributing the sealantDrive approx. 3.1 miles/5 km to evenly distrib‐ute the sealant.Do not exceed a speed of 50 mph/80 km/h. Ifpossible, do not drop below a speed of10 mph/20 km/h.
Correcting the tire inflation pressure1. After driving approx. 3.1 miles/5 km, or
about 10 minutes, stop in a suitable loca‐tion.
2. Screw the connection hose 6 of the com‐pressor directly onto the tire valve.
3. Insert the connector 5 into the powersocket in the passenger compartment.
4. Correct the tire inflation pressure to1.8 bar/26 psi. When the engine is running:▷ To increase the inflation pressure:
switch on the compressor. To check thecurrently set inflation pressure, switchoff the compressor.
▷ To reduce the inflation pressure: pressthe release button 9.
Seite 162
Mobility Wheels and tires
162 Online Edition for Part no. 01 40 2 911 521 - VI/13
Do not allow the compressor to run toolong
Do not allow the compressor to run longer than10 minutes; otherwise, the device will overheatand may be damaged.◀
If the inflation pressure is not maintained, takethe vehicle on another drive, distributing thesealant, refer to page 162. Then repeat steps1 to 4 once.If the inflation pressure of 1.8 bar/26 psi is stillnot reached, the tire is too heavily damaged.Contact the nearest service center.
Continuing the tripNote the maximum speedDo not exceed the maximum speed of
50 mph/80 km/h; otherwise, accidents can oc‐cur.◀
Replace the defective tire as soon as possibleand have the wheel balanced.Have the Mobility System refilled.
Snow chainsOnly certain fine-link snow chains have beentested by MINI, classified as safe for use, andrecommended. Consult your service center formore information.Use only in pairs on the front wheels, equippedwith tires of the following size:195/60 R 16 M+SWith ALL4 all-wheel drive: only mount snowchains on the front wheels.Observe the manufacturer's instructions whenmounting snow chains. Do not exceed a speedof 30 mph or 50 km/h when using snow chains.Do not initialize the Flat Tire Monitor if snowchains are mounted; otherwise, the instrumentmight issue an incorrect reading. When drivingwith snow chains, it may be useful to tempora‐
rily deactivate DSC or activate DTC, refer topage 81.
Seite 163
Wheels and tires Mobility
163Online Edition for Part no. 01 40 2 911 521 - VI/13
Engine compartmentVehicle equipmentThis chapter describes all series equipment aswell as country-specific and special equipmentoffered for this model series.Therefore, it also
describes equipment that may not be found inyour vehicle, for instance due to the selectedspecial equipment or the country version. Thisalso applies to safety-related functions and sys‐tems.
Important features in the engine compartment
1 Vehicle identification number2 Battery, under the cover 1783 Dip stick for engine oil 1664 Engine oil filler neck 166
5 Coolant expansion tank 1686 Engine compartment fuse box 1787 Reservoir for washer fluid for the headlamp
and window washer system 55
HoodNotes
Working in the engine compartmentNever attempt to perform any service or
repair operations on your vehicle without thenecessary professional technical training.
If you are unfamiliar with the statutory guide‐lines, have any work on the vehicle performedonly by a service center.If this work is not carried out properly, there isthe danger of subsequent damage and relatedsafety hazards.◀
Seite 164
Mobility Engine compartment
164 Online Edition for Part no. 01 40 2 911 521 - VI/13
To avoid damage, make sure that thewiper arms are resting against the wind‐
shield before you open the engine compart‐ment. Do not open the engine hood before theengine has cooled down; otherwise, injuriesmay result.◀
Unlocking and opening the hood1. Pull the lever.
2. Lift the hood all the way.3. Press the release handle and open the
hood.
Danger of injury when the hood is openThere is a danger of injury from protrud‐
ing parts when the hood is open.◀
Closing the hood
Close the hood from a height of ap‐prox. 16 in/40 cm with momentum. It must beclearly heard to engage.
Hood open when drivingIf you see any signs that the hood is not
completely closed while driving, pull over im‐mediately and close it securely.◀
Danger of pinchingMake sure that the closing path of the
hood is clear; otherwise, injuries may result.◀
Seite 165
Engine compartment Mobility
165Online Edition for Part no. 01 40 2 911 521 - VI/13
Engine oilVehicle equipmentThis chapter describes all series equipment aswell as country-specific and special equipmentoffered for this model series.Therefore, it alsodescribes equipment that may not be found inyour vehicle, for instance due to the selectedspecial equipment or the country version. Thisalso applies to safety-related functions and sys‐tems.
Engine oilGeneral informationEngine oil consumption depends on the drivingstyle and the conditions of use. A highly sportydriving style, for example, results in considera‐bly higher engine oil consumption.Therefore, regularly check the engine oil levelafter refueling.
Checking the oil level with a dip stick1. Park the vehicle on level ground when the
engine is at operating temperature, i.e., af‐ter driving continuously for at least6 2 miles/10 km.
2. Switch the engine off.3. After approx. 5 minutes, pull out the dip
stick and wipe it off with a lint-free cloth,paper towel, etc.
4. Carefully insert the dip stick all the way intothe measuring tube and pull it out again.
The oil level must be between the twomarks on the dip stick.
The oil quantity between the two marks on thedip stick equals approx. 1 US quart/1 liter.
Do not exceed the high mark.Do not exceed the high mark of the dip
stick. Overfilling oil damages the engine.◀
Adding engine oil
Filler neck
Add a maximum quantity of 1 US quart/1 literof oil only after the corresponding message ap‐pears on the Control Display or, in diesel en‐gines, after the oil level is just above the lowmark of the dip stick, refer to page 166.
Add oil promptlyAdd oil within the next 30 miles/50 km;
otherwise, engine damage could result.◀
Seite 166
Mobility Engine oil
166 Online Edition for Part no. 01 40 2 911 521 - VI/13
Too much engine oilHave the vehicle checked immediately;
otherwise, surplus oil can lead to engine dam‐age.◀
Protect childrenKeep oil, grease, etc., out of reach of chil‐
dren and heed the warnings on the containersto prevent health risks.◀
Oil types for refilling
NotesNo oil additivesDo not use oil additives as these may
cause engine damage.◀
Viscosity classes of engine oilsWhen selecting an engine oil, ensure that
the engine oil belongs to one of the SAE viscos‐ity classes 0W-40, 0W-30, 5W-40, or 5W-30, ormalfunctions or engine damage may occur.◀
The engine oil quality is critical for the life of theengine.Due to national regulations, some oil types arenot available in every country.
Approved oil types
Gasoline engine
BMW High Performance SAE 5W-30
BMW Longlife-01
BMW Longlife-01 FE
Further information on approved oil types canbe obtained from the service center.
Alternative oil typesIf the approved engine oils are not available, upto 1 US quart/1 liter of an oil with the followingspecification can be used:
Gasoline engine
API SM or a higher quality standard
Oil changeAn oil change should be carried out by the serv‐ice center only.
Seite 167
Engine oil Mobility
167Online Edition for Part no. 01 40 2 911 521 - VI/13
CoolantVehicle equipmentThis chapter describes all series equipment aswell as country-specific and special equipmentoffered for this model series.Therefore, it alsodescribes equipment that may not be found inyour vehicle, for instance due to the selectedspecial equipment or the country version. Thisalso applies to safety-related functions and sys‐tems.
General informationDanger of burns from hot engineDo not open the cooling system while the
engine is hot; otherwise, escaping coolant maycause burns.◀
Suitable additivesOnly use suitable additives; otherwise,
engine damage may occur. The additives areharmful to your health.◀
Coolant consists of water and additives.Not all commercially available additives aresuitable for your MINI vehicle. Ask your servicecenter for suitable additives.
Coolant temperatureIf the coolant and therefore the engine over‐heat, a warning lamp lights up, refer topage 190.
Coolant levelChecking1. Do not open the hood until the engine has
cooled down.
2. Turn the expansion tank cap counterclock‐wise slightly to allow any accumulatedpressure to escape; then continue turningto open.
3. The coolant level is correct if it is betweenthe markings. The markings are located onthe side of the coolant reservoir.
Refilling1. Do not open the hood until the engine has
cooled down.2. Turn the expansion tank cap counterclock‐
wise slightly to allow any accumulatedpressure to escape, then continue turningto open.
3. If the coolant level is low, slowly add cool‐ant up to the specified level; do not overfill.
4. Twist the cap closed.5. Have the cause of the coolant loss elimi‐
nated as soon as possible.
DisposalComply with the appropriate environ‐mental protection regulations when dis‐
posing of coolant additives.
Seite 168
Mobility Coolant
168 Online Edition for Part no. 01 40 2 911 521 - VI/13
MaintenanceVehicle equipmentThis chapter describes all series equipment aswell as country-specific and special equipmentoffered for this model series.Therefore, it alsodescribes equipment that may not be found inyour vehicle, for instance due to the selectedspecial equipment or the country version. Thisalso applies to safety-related functions and sys‐tems.
MINI maintenance system
The MINI maintenance system provides infor‐mation on required maintenance measures andthus provides support in maintaining roadsafety and the operational reliability of the ve‐hicle.
Condition Based ServiceCBSSensors and special algorithms take into ac‐count the various driving conditions of yourMINI. Based on this, Condition Based Servicedetermines the current and future mainte‐nance requirements.The system makes it possible to adapt theamount of maintenance you need to your userprofile.
Detailed information on service requirementscan be displayed in the tachometer, refer topage 64.
Service data in the remote controlInformation on the required maintenance iscontinuously stored in the remote control. Yourservice center will read out this data and sug‐gest the right array of service procedures foryour vehicle. Therefore, hand your service spe‐cialist the remote control that you used mostrecently.
Setting the correct dateMake sure the date is set correctly; other‐
wise, the effectiveness of CBS Condition BasedService is not ensured.◀
Service and Warranty In‐formation Booklet forUS models and Warrantyand Service Guide Book‐let for Canadian modelsPlease consult your Service and Warranty Infor‐mation Booklet for US models and Warrantyand Service Guide Booklet for Canadian modelsfor additional information on service require‐ments.Maintenance and repair should be performedby your service center. Make sure to have regu‐lar maintenance procedures recorded in the ve‐hicle's Service and Warranty Information Book‐let for US models, and in the Warranty andService Guide Booklet for Canadian models.These entries are proof of regular maintenance.
Seite 169
Maintenance Mobility
169Online Edition for Part no. 01 40 2 911 521 - VI/13
Socket for OBD OnboardDiagnosis
Socket for Onboard DiagnosisThe socket for Onboard Diagnosis may
only be used by the service center, by work‐shops that operate according to the specifica‐tions of the vehicle manufacturer with appro‐priately trained personnel, and by otherauthorized persons. Otherwise, its use maylead to vehicle malfunctions.◀
Primary components in the vehicle emissionscan be checked via the OBD socket using a de‐vice.
EmissionsThe warning lamps light up. The vehicleis producing higher emissions. You cancontinue your journey, but moderate
your speed and exercise due caution. Have thevehicle checked as soon as possible.
Under certain circumstances, one of the lampsflashes or lights up continuously. This indicatesthat there is excessive misfiring or a malfunc‐tion in the engine. If this happens, reduce thevehicle speed and drive to the next service cen‐ter promptly. Serious engine misfiring within abrief period can seriously damage emissioncontrol components, in particular the catalyticconverter. In addition, the mechanical enginecomponents may become damaged.
If the fuel filler cap is not properly tight‐ened, the OBD system may conclude
that fuel vapor is escaping; this will cause a dis‐play to light up. If the filler cap is then tight‐ened, the display should go out in a few days.
Seite 170
Mobility Maintenance
170 Online Edition for Part no. 01 40 2 911 521 - VI/13
Replacing componentsVehicle equipmentThis chapter describes all series equipment aswell as country-specific and special equipmentoffered for this model series.Therefore, it alsodescribes equipment that may not be found inyour vehicle, for instance due to the selectedspecial equipment or the country version. Thisalso applies to safety-related functions and sys‐tems.
Wiper blade replacementGeneral information
Do not fold down the wipers withoutwiper blades
Do not fold down the wipers if wiper bladeshave not been installed; this may damage thewindshield.◀
Replacing the front wiper blades1. Fold up and hold the wiper arm.2. Squeeze the locking spring, arrows 1, and
fold out the wiper blade, arrow 2.
3. Take the wiper blade out of the catchmechanism toward the front.
4. Press the new wiper blade into the fixationuntil it engages audibly.
5. Fold down the wiper arm.
Risk of damageBefore opening the hood, ensure that the
wiper arms with wiper blades are folded ontothe window; otherwise, damage may occur.◀
Replacing the rear wiper bladeMINI Countryman:
MINI Paceman:
1. Fold up and hold the wiper arm.2. Turn the wiper blade all the way back, ar‐
row.3. Press the wiper blade against the stop to
push it out of the fixation.4. Press the new wiper blade into the fixation
until it engages audibly.5. Fold down the wiper arm.
Seite 171
Replacing components Mobility
171Online Edition for Part no. 01 40 2 911 521 - VI/13
Lamp and bulb replace‐mentNotes
Lamps and bulbsLamps and bulbs make an essential contribu‐tion to vehicle safety. Therefore, exercise cau‐tion when handling lamps and bulbs.The manufacturer of the vehicle recommendsthat you entrust corresponding procedures tothe service center if you are unfamiliar withthem or they are not described here.You can obtain a selection of replacementbulbs at the service center.
Danger of burnsOnly change bulbs when they are cool;
otherwise, there is the danger of gettingburned.◀
Working on the lighting systemWhen working on the lighting system,
you should always switch off the lights affectedto prevent short circuits.To avoid possible injury or equipment damagewhen replacing bulbs, observe any instructionsprovided by the bulb manufacturer.◀
Do not touch the bulbsDo not touch the glass of new bulbs with
your bare hands, as even minute amounts ofcontamination will burn into the bulb's surfaceand reduce its service life.Use a clean tissue, cloth or something similar,or hold the bulb by its base.◀
Caring for the headlamps, refer to page 187.For bulb replacement that is not describedhere, please contact the service center or aworkshop that works according to the repairprocedures of the manufacturer with corre‐spondingly trained personnel.
For checking and adjusting headlamp aim,please contact your MINI dealer.
Light-emitting diodes LEDsLight-emitting diodes installed behind translu‐cent lenses serve as the light source for manyof the controls and displays in the vehicle.These light-emitting diodes, which operate us‐ing a concept similar to that applied in conven‐tional lasers, are officially designated as Class 1light-emitting diodes.
Do not remove the coversDo not remove the covers, and never
stare into the unfiltered light for several hours;otherwise, irritation of the retina could result.◀
Headlamp glassCondensation can form on the inside of theheadlamps in cool or humid weather. When thelight is switched on, the condensation evapo‐rates after a short time. The headlamps do notneed to be changed.If the condensation in the headlamps does notevaporate after trips with the lights switchedon, and the amount of moisture in the head‐lamps increases, for example if water dropletsform, have them checked by your service cen‐ter.
Bi-xenon headlampsThese bulbs have a very long life and the likeli‐hood of failure is very low, provided that theyare not switched on and off excessively. If abulb should nevertheless fail, you can continuedriving cautiously with the front fog lamps, pro‐vided this is permitted by local laws.
Do not perform work/bulb replacementon xenon headlamps
Have any work on the xenon lighting system,including bulb replacement, performed only bya service center.
Seite 172
Mobility Replacing components
172 Online Edition for Part no. 01 40 2 911 521 - VI/13
Due to the high voltage present in the system,there is the danger of fatal injuries if work iscarried out improperly.◀
Front lamps, bulb replacement
Halogen low beams and high beamsBulb H13, 60/55 watt
Wear protective goggles and glovesHalogen bulbs are pressurized. Therefore,
wear protective goggles and gloves. Otherwise,there is a danger of injuries if the bulb is acci‐dentally damaged during replacement.◀
Attach the cover carefullyWhen attaching the cover, proceed care‐
fully; otherwise, leaks may occur, causing dam‐age to the headlamp system.◀
Access to the bulbs through the enginecompartmentFollow the general instructions on lamps andbulbs, refer to page 172.Low beam/high beam bulbs can be changedfrom the engine compartment.
To remove the cover:
1. Press the tab.2. Fold away the cover and take it out of the
holder.Proceed in reverse order to attach the cover.
Attach the cover carefullyWhen attaching the cover, proceed care‐
fully; otherwise, leaks may occur, causing dam‐age to the headlamp system.◀
Replacing the bulb1. Turn the bulb counterclockwise, arrow 1,
and remove it, arrow 2.
2. Press the release, arrow 1, and pull off theconnector, arrow 2.
3. Insert the new bulb and attach the cover inreverse order.
Turn signal, parking lamp, roadsideparking lamp, and front fog lamp
Access to the bulbs via the wheel housingFollow the general instructions on lamps andbulbs, refer to page 172.
Seite 173
Replacing components Mobility
173Online Edition for Part no. 01 40 2 911 521 - VI/13
1 Turn signal2 Parking lamp/roadside parking lamp/fog
lamp
Replacing the turn signal bulb21-watt bulb, P 21 W, or PY 21 W
1. Turn the wheel.2. Remove cover 1.
To do this, turn the cover counterclockwise.3. Remove the inside cover. To do this, turn
the cover counterclockwise.
4. Turn the bulb counterclockwise and re‐move it.
5. Insert the new bulb and attach the coversin reverse order.
Replacing the parking lamp bulb androadside parking lamp bulb5-watt bulb, W 5 W
1. Turn the wheel.2. Remove cover 2.
To do this, turn the cover counterclockwise.3. Turn the upper bulb counterclockwise and
remove it.
4. Insert the new bulb and attach the cover inreverse order.
Replacing the front fog lamp bulbH8 bulb, 35 watt
1. Turn the wheel.2. Remove cover 2.
To do this, turn the cover counterclockwise.3. Pull off the plug-in cable connector.4. Turn the lower bulb counterclockwise and
remove it.
5. Insert the new bulb and attach the cover inreverse order.
Seite 174
Mobility Replacing components
174 Online Edition for Part no. 01 40 2 911 521 - VI/13
Lateral turn signals5-watt bulb, W 5 W
1. Open the hood.
2. Squeeze the clip, arrows, and remove thebulb holder.
3. Remove the bulb by turning it to the leftand replace it.
4. Insert the new bulb and attach the cover inreverse order.
Side marker lampsTo replace these bulbs, contact the service cen‐ter.
Tail lamps, bulb replacementFollow the general instructions on lamps andbulbs, refer to page 172.Turn signal: 21-watt bulb, PY 21 W
MINI Countryman
1 Brake/tail lamp2 Turn signal
3 Brake/tail lamp4 Backup lamp
MINI Paceman
1 Brake lamp2 Tail lamp3 Turn signal4 Backup lamp
ReplacingAll bulbs are integrated in a central bulb holder.
MINI Countryman1. Switch off the lamps and take the remote
control out of the ignition lock.2. Open the tailgate.3. Press the cover out of the cargo area side
panel at the rear and remove it.
4. Detach the emergency release of the fuelfiller flap, refer to page 148, and push itaside with the foam insert.Ensure that the emergency release is notdamaged.
Seite 175
Replacing components Mobility
175Online Edition for Part no. 01 40 2 911 521 - VI/13
5. Disengage the bulb holder by pushingdown the clip, arrow 1.
6. Take out the bulb holder and detach thecable, arrow 2.
7. Apply gentle pressure to the bulb whileturning it to the left and remove it.
8. Insert the new bulb and mount the bulbholder in reverse order. Ensure that thebulb holder engages in all fasteners.
9. Return the foam insert to its original posi‐tion and reattach the emergency release ofthe fuel filler flap.
10. Reattach the cover.
MINI Paceman1. Switch off the lamps and take the remote
control out of the ignition lock.2. Open the tailgate.3. Remove the cover from the cargo area side
trim.
4. Unlock the fastening elements, arrows 1, byturning.
5. Remove the screws, arrows 2, using the hexkey from the vehicle document portfolio.
6. Remove the tail lamp.7. Disengage the bulb holder by pushing
down the clip, arrows 1.
8. Take out the bulb holder and detach thecable, arrow 2.
9. Apply gentle pressure to the bulb whileturning it to the left and remove it.
10. Insert the new bulb and mount the bulbholder in reverse order. Ensure that thebulb holder engages in all fasteners.
License plate lamps5-watt bulb, C 5 W
Seite 176
Mobility Replacing components
176 Online Edition for Part no. 01 40 2 911 521 - VI/13
Replacing
MINI Countryman1. Push the lamp to the left in the catch of the
lamp housing using the screwdriver, ar‐row 1.
2. Take out the lamp, arrow 2.3. Replace the bulb.4. Insert the lamp.
MINI Paceman1. Push the lamp to the left in the catch of the
lamp housing using the screwdriver, ar‐row 1.
2. Take out the lamp, arrow 2.3. Replace the bulb.4. Insert the lamp.
Center brake lampThis lamp uses LED technology for operation. Incase of a defect, please contact your servicecenter or a workshop that works according tothe repair procedures of the manufacturer ofyour MINI with correspondingly trained person‐nel.
Changing wheelsNotesThe vehicle may be equipped with conven‐tional tires with the Mobility System, refer topage 161, or with run-flat tires, refer topage 160.No spare tire is available in the case of a flattire.Suitable tools for changing the wheels areavailable from the service center as an acces‐sory.
Jacking points for the vehicle jackMINI Countryman:
MINI Paceman:
The jacking points for the vehicle jack are lo‐cated in the positions shown.
Seite 177
Replacing components Mobility
177Online Edition for Part no. 01 40 2 911 521 - VI/13
Vehicle batteryMaintenanceThe battery is maintenance-free, i.e., the elec‐trolyte will last for the life of the battery in tem‐perate climate conditions.The service center will be happy to answer anyquestions on the battery.
Battery replacementUse approved vehicle batteriesOnly use vehicle batteries that have been
approved for your vehicle by the manufacturer;otherwise, the vehicle could be damaged andsystems or functions may not be fully availa‐ble.◀
Have the vehicle battery registered by the serv‐ice center after it is replaced to ensure that allcomfort functions are available without restric‐tions and that any associated Check Controlmessages are no longer displayed.
Charging the battery
NoteDo not connect the charger to the socketDo not connect the battery charger to the
socket installed in the vehicle at the factory asthis could damage the battery.◀
Only charge the battery in the vehicle when theengine is switched off. Connections, refer topage 180.
General informationEnsure that the battery is sufficiently charged toachieve the full battery life.It may be necessary to charge the battery inthe following cases:▷ When the vehicle is frequently used to
travel short distances.▷ When the vehicle has not been driven for
more than one month.
Power failureAfter a temporary power failure, some equip‐ment will be restricted in its use and will needto be reinitialized. In addition, certain individualsettings will be lost and must be updated:▷ Time and date: the values must be up‐
dated, refer to page 63.▷ Radio: the stations need to be stored again,
refer to page 126.▷ Glass sunroof, electrical: it may only be pos‐
sible to tilt the roof. The system needs to beinitialized. Contact the service center.
Disposing of old batteriesHave used batteries disposed of by theservice center after they are replaced ortake them to a recycling center.
Maintain the battery in an upright position fortransport and storage. Secure the battery sothat it does not tip over during transport.
FusesReplacing fusesNever attempt to repair a blown fuse and
do not replace a defective fuse with a substi‐tute of another color or amperage rating; thiscould lead to a circuit overload, ultimately re‐sulting in a fire in the vehicle.◀
Fuses should be replaced by the service center.Information on the fuses can be found on theinside of the covers.
Seite 178
Mobility Replacing components
178 Online Edition for Part no. 01 40 2 911 521 - VI/13
In the engine compartment
Opening the coverPress the snap lock.
In interior
On the right side of the footwell.
Opening the coverPush out at the recess.
Seite 179
Replacing components Mobility
179Online Edition for Part no. 01 40 2 911 521 - VI/13
Breakdown assistanceVehicle equipmentThis chapter describes all series equipment aswell as country-specific and special equipmentoffered for this model series.Therefore, it alsodescribes equipment that may not be found inyour vehicle, for instance due to the selectedspecial equipment or the country version. Thisalso applies to safety-related functions and sys‐tems.
Hazard warning flash‐ers
The button is located on the speedometer.
Warning triangle
Under the loading edge in the cargo area.To remove, open the two fasteners.
First aid kitSome of the articles contained in the first aid kithave a limited service life. Therefore, check theuse-by dates of the contents regularly and re‐place the items before they expire.
The first aid kit is located in the left side trim onthe cargo area floor or under the loading floor.
Roadside AssistanceService availabilityRoadside Assistance can be reached around theclock in many countries. You can obtain assis‐tance there in the event of a vehicle break‐down.
Roadside AssistanceA phone number for Roadside Assistance canbe displayed, refer to page 142, via the radio.
Jump-startingNotesIf the battery is discharged, the engine can bestarted using the battery of another vehicle andtwo jumper cables. In the same way, you canhelp jump-start another vehicle. Only use
Seite 180
Mobility Breakdown assistance
180 Online Edition for Part no. 01 40 2 911 521 - VI/13
jumper cables with fully insulated clamp han‐dles.To prevent personal injury or damage to bothvehicles, adhere strictly to the following proce‐dure.
Do not touch live partsTo avoid the risk of potentially fatal injury,
always avoid all contact with electrical compo‐nents while the engine is running.◀
Preparation1. Check whether the battery of the other ve‐
hicle has a voltage of 12 volts and approxi‐mately the same capacitance in Ah. This in‐formation can be found on the battery.
2. Switch off the engine of the assisting vehi‐cle.
3. Switch off any electronic systems/powerconsumers in both vehicles.
Bodywork contact between vehiclesThere must not be any contact between
the bodies of the two vehicles, otherwise thereis a danger of shorting.◀
Connecting jumper cablesConnecting orderConnect the jumper cables in the correct
order; otherwise, there is the danger of injuryfrom sparking.◀
1. Open the battery cover in the engine com‐partment to access the positive terminal.
2. Unlock the tabs of the positive terminalcover on the left and right, arrows 1, andraise the cover, arrow 2.
3. Attach one terminal clamp of the positivejumper cable to the positive terminal of thebattery or to a starting aid terminal of thevehicle providing assistance.
4. Attach the second clamp of the positivejumper cable to the positive terminal of thebattery of the vehicle to be started.
5. Attach one terminal clamp of the negativejumper cable to the negative terminal ofthe battery, or to the corresponding engineor body ground of the vehicle providing as‐sistance.
6. Attach the second clamp of the negativejumper cable to the negative terminal of
Seite 181
Breakdown assistance Mobility
181Online Edition for Part no. 01 40 2 911 521 - VI/13
the battery, or to the engine or bodyground of the vehicle to be started.
Body ground:
Starting the engineNever use spray fluids to start the engine.
1. Start the engine of the assisting vehicle andlet it run for several minutes at a slightly in‐creased idle speed.
2. Start the engine of the vehicle being startedin the usual way.If the first starting attempt is not successful,wait a few minutes before making anotherattempt in order to allow the dischargedbattery to recharge.
3. Let both engines run for several minutes.4. Disconnect the jumper cables in the reverse
order.Check the battery and recharge if necessary.
Tow-starting and towingNotes
Observe applicable laws and regulationsObserve applicable laws and regulations
for tow-starting and towing.◀
No additional passengersDo not transport any passengers other
than the driver in a vehicle that is beingtowed.◀
Using a tow fittingThe screw-in tow fitting must always be carriedin the vehicle. It can be screwed in at the frontor rear of the MINI.The tow fitting is stowed in the following loca‐tion, depending on the equipment:▷ Under the right or left front seat.▷ In the pouch of the wheel change set in the
cargo area.Tow fitting, information on use▷ Use only the tow fitting provided with
the vehicle and screw it all the way in.▷ Use the tow fitting for towing on paved
roads only.▷ Avoid lateral loading of the tow fitting, e.g.,
do not lift the vehicle by the tow fitting.Otherwise, damage to the tow fitting and thevehicle can occur.◀
Access to the screw threadPush out the tow fitting cover at the appropri‐ate recess in the bumper.
Front
Seite 182
Mobility Breakdown assistance
182 Online Edition for Part no. 01 40 2 911 521 - VI/13
MINI Countryman: rear
MINI Paceman: rear
Being towedFollow the towing instructionsFollow all towing instructions, or vehicle
damage or accidents may occur.◀
▷ Make sure that the ignition is switched on;otherwise, the low beams, tail lamps, turnsignals, and windshield wipers may be un‐available.
▷ Do not tow the vehicle with the rear axletilted, as the front wheels could turn.
▷ When the engine is stopped, there is nopower assist. Consequently, more forceneeds to be applied when braking andsteering.
▷ Larger steering wheel movements are re‐quired.
▷ Switch on the hazard warning system, de‐pending on local regulations.
Manual transmissionGearshift lever in neutral position.
Automatic transmissionTowing vehicles with an automatic trans‐mission
Only transport vehicles with an automatictransmission on tow trucks or with raised frontwheels; otherwise, the transmission may bedamaged.◀
Towing with a tow barLight towing vehicleThe towing vehicle must not be lighter
than your vehicle, or it will not be possible tocontrol vehicle response.◀
Correctly attach the tow barOnly secure the tow bar on the tow fit‐
tings; damage can occur when it is secured onother parts of the vehicle.◀
The tow fittings used should be on the sameside on both vehicles.Should it prove impossible to avoid mountingthe tow bar at an offset angle, please observethe following:▷ Clearance and maneuvering capability will
be sharply limited during cornering.▷ The tow bar will generate lateral forces if it
is attached offset.
Towing with a tow ropeWhen starting to tow the vehicle, make surethat the tow rope is taut.To avoid jerking and the associated stresses onthe vehicle components when towing, alwaysuse nylon ropes or nylon straps.
Attaching the tow rope correctlyOnly secure the tow rope on the tow fit‐
ting; otherwise, damage can occur when it issecured on other parts of the vehicle.◀
Seite 183
Breakdown assistance Mobility
183Online Edition for Part no. 01 40 2 911 521 - VI/13
With a tow truck: vehicles without ALL4all-wheel drive
Do not lift the vehicleDo not lift the vehicle by the tow fitting or
body and chassis parts; otherwise, damagemay result.◀
MINI Countryman:
MINI Paceman:
Have the vehicle transported with a tow truckwith a so-called lift bar or on a flat bed.
With a tow truck: vehicle with ALL4 all-wheel drive
Do not lift the vehicleDo not lift the vehicle by the tow fitting or
body and chassis parts; otherwise, damagemay result.◀
Note for vehicles with ALL4 all-wheeldrive
Do not tow a vehicle with ALL4 all-wheel drivewith just the front or rear axle raised; other‐
wise, the wheels could lock up and the transfercase could be damaged.◀
MINI Countryman:
MINI Paceman:
Only transport the vehicle on a flat-bed.
Tow-startingIf possible, do not tow-start the vehicle butstart the engine by jump-starting, refer topage 180. Vehicles with a catalytic convertershould only be tow-started when the engine iscold; vehicles with an automatic transmissioncannot be tow-started.
1. Switch on the hazard warning system andcomply with local regulations.
2. Switch on the ignition, refer to page 49.3. Shift into 3rd gear.4. Have the vehicle tow-started with the
clutch is depressed and then slowly releasethe clutch. After the engine starts, immedi‐ately depress the clutch completely again.
Seite 184
Mobility Breakdown assistance
184 Online Edition for Part no. 01 40 2 911 521 - VI/13
5. Stop at a suitable location, remove the towbar or rope, and switch off the hazardwarning system.
6. Have the vehicle checked.
Seite 185
Breakdown assistance Mobility
185Online Edition for Part no. 01 40 2 911 521 - VI/13
CareVehicle equipmentThis chapter describes all series equipment aswell as country-specific and special equipmentoffered for this model series.Therefore, it alsodescribes equipment that may not be found inyour vehicle, for instance due to the selectedspecial equipment or the country version. Thisalso applies to safety-related functions and sys‐tems.
Car washesNotes
Steam jets or high-pressure washersWhen using steam jets or high-pressure
washers, hold them a sufficient distance awayand use a maximum temperature of140 ℉/60 ℃.Holding them too close or using excessivelyhigh pressures or temperatures can cause dam‐age or preliminary damage that may then leadto long-term damage.Follow the operating instructions for the high-pressure washer.◀
Do not direct steam or high-pressure washerstoward the labels applied by the manufacturer;otherwise, damage may result.
Cleaning sensors/cameras with high-pres‐sure washers
When using high-pressure washers, do notspray the seals of the retractable hardtop andthe exterior sensors and cameras, for Park Dis‐tance Control, for instance, for extended peri‐ods of time and only from a distance of at least12 in/30 cm.◀
During the winter monthsEnsure that the vehicle is washed more
frequently in winter. Intense soiling and roadsalt can damage the vehicle.◀
After washing the vehicle, apply the brakesbriefly to dry them; otherwise, braking actioncan be reduced and corrosion of the brakediscs can occur.Regularly remove foreign bodies, such asleaves, from the area of the windshield whenthe hood is open.
Washing in automatic car washesGive preference to cloth car washes or thosethat use soft brushes in order to avoid paintdamage.Do not use automatic high-pressure washers;otherwise, water may drip into the interior inthe area of the windows.Before driving into the car wash, check whetherthe system is suitable for your MINI. Note thefollowing points:▷ Vehicle dimensions, refer to page 204.▷ If necessary: fold in the exterior mirrors, re‐
fer to page 42.▷ Maximum permissible tire width.
Guide rails in car washesAvoid car washes with guide rails higher
than 4 in/10 cm; otherwise, the vehicle chassiscould be damaged.◀
Preparations before driving into the car wash:▷ Unscrew the road antenna.▷ Deactivate the rain sensor to avoid unin‐
tentional wiper activation.▷ Deactivate the rear window wiper and pro‐
tect it from damage. Ask the car wash oper‐ator about any necessary protective meas‐ures.
Seite 186
Mobility Care
186 Online Edition for Part no. 01 40 2 911 521 - VI/13
▷ Remove additional attachments, for in‐stance a spoiler or telephone antenna, ifthere is a risk that these may be damaged.
▷ Insert the remote control into the ignitionlock.
Automatic transmissionBefore driving into the car wash, note the fol‐lowing to ensure that the vehicle can roll:
1. Insert the remote control into the ignitionlock, even with Comfort Access.
2. Move the selector lever to position N.3. Release the handbrake.4. Switch the engine off.5. Leave the remote control in the ignition
lock so that the vehicle can roll.
Hand car washIf washing the vehicle by hand, use copiousquantities of water and car shampoo if neces‐sary. Clean the vehicle with a sponge or awashing brush by applying gentle pressure.Before cleaning the windshield, deactivate therain sensor to avoid unintentional wiper activa‐tion or switch off the ignition.
Adhere to the local regulations regardingwashing cars by hand.
HeadlampsDo not rub dry and do not use abrasive or caus‐tic cleansers. Soak areas that have been soiled,e.g., due to insects, with shampoo and rinse offwith copious quantities of water.Thaw ice with a window deicer; do not use anice scraper.
WindowsClean the outside and inside surfaces of thewindows and the mirror glasses with windowcleaner.
Do not clean mirror glass with cleaners contain‐ing quartz.
Wiper bladesClean with soapy water and replace regularly toavoid streaking.Wax and preservative residue and soiling onthe windows cause streaking during windowwiping and lead to premature wear on thewiper blades and malfunctions of the rain sen‐sor.
Vehicle careCar care productsRegular cleaning and care contributes signifi‐cantly to vehicle value retention.The manufacturer recommends using cleaningand care products from MINI, since these havebeen tested and approved.Original MINI CareProducts have been testedon materials, in the laboratory, and in the field,and offer optimum care and protection for MINIvehicles.
Do not use cleansers that contain alcoholor solvents
Do not use cleansers that contain alcohol orsolvents, such as lacquer thinners, heavy-dutygrease removers, fuel, or such; this could leadto surface damage.◀
Car care and cleaning productsFollow the instructions on the container.
When cleaning the interior, open the doors orwindows.Only use products intended for cleaning vehi‐cles.Cleansers can contain substances that are dan‐gerous and harmful to your health.◀
Seite 187
Care Mobility
187Online Edition for Part no. 01 40 2 911 521 - VI/13
Vehicle paintRegular care contributes to vehicle value reten‐tion and protects the paintwork against thelong-term effects of paint-damaging substan‐ces.Environmental influences in areas with higherair pollution or natural contaminants, such astree resin or pollen, can have an impact on thevehicle paint. Therefore, it is important to tailorthe frequency and extent of your car care tothese influences.Immediately remove especially aggressive sub‐stances, such as spilled fuel, oil, grease, or birddroppings, to prevent damage to the paint‐work.
Correcting paint damageDepending on the severity of the damage, re‐pair stone impact damage or scratches imme‐diately to prevent rust formation.The manufacturer recommends having paintdamage corrected with a professional repairpaint job according to factory specifications us‐ing original MINI paint materials.
PreservationPreservation is needed when water no longerbeads off of the clean paint surfaces. Only usepaint preservation products that contain car‐nauba or synthetic waxes.
Leather careThe leather processed by the manufacturer is ahigh quality natural product. Light graininess isa typical feature of natural leather.Particles of dust and road grime chafe in poresand folds, and lead to increased wear and pre‐mature degradation of the leather surface.Therefore, remove dust from the leather regu‐larly, using a cloth or vacuum cleaner.Make especially sure that light-colored leatheris cleaned regularly as it is more susceptible tosoiling.
Twice a year, treat the leather with a leather lo‐tion as dirt and grease will attack the protectivelayer of the leather.
Upholstery material careVacuum regularly with a vacuum cleaner to re‐move superficial soiling.In case of heavy soiling, e.g., beverage stains,use a soft sponge or lint-free microfiber cloth incombination with a suitable interior cleaner.Follow the instructions on the container.Clean the upholstery material down to theseams using large sweeping motions. Avoidrubbing the material vigorously.
Damage from Velcro® fastenersOpen Velcro® fasteners on pants or other
articles of clothing can damage the seat covers.Ensure that any Velcro® fasteners are closed.◀
Caring for special components
Interior plastic partsThese include:▷ Imitation leather surfaces▷ Lamp lenses▷ Indicator covers▷ Matte componentsClean with water and a solvent-free plasticcleaner if necessary.
Do not use cleansers that contain alcoholor solvents
Do not use cleansers that contain alcohol orsolvents, such as lacquer thinners, heavy-dutygrease removers, fuel, or such; this could leadto surface damage.◀
Rubber sealsOnly treat with water or a rubber care product.When cleaning rubber seals, do not use siliconesprays or other care products containing sili‐cone; otherwise, noise and damage may result.
Seite 188
Mobility Care
188 Online Edition for Part no. 01 40 2 911 521 - VI/13
Chrome surfacesCarefully clean components such as the radia‐tor grille or door handles with an ample supplyof water, possibly with shampoo added, partic‐ularly when they have been exposed to roadsalt. For additional treatment, use a chromepolish.
Light-alloy wheelsWhen cleaning the wheels on the vehicle, onlyuse a neutral wheel rim cleaner with a pH valueof 5 to 9.Do not use abrasive cleaners or a steam jet hot‐ter than 140 ℉/60 ℃; otherwise, damage mayresult. Adhere to the manufacturer instructions.Aggressive, acidic, or alkaline cleaners may de‐stroy the protective coating of neighboringcomponents such as the brake disc.
Exterior sensorsThe sensors on the outside of the vehicle, suchas for Park Distance Control, must be kept cleanand free of ice to ensure that they remain fullyfunctional.
Decorative trimClean decorative trims and fine wood compo‐nents with a moist cloth only. Then dry with asoft cloth.
Safety beltsDirty belt straps impede the reeling action andthus have a negative impact on safety.
No chemical cleaningDo not clean chemically; this can destroy
the webbing.◀
Carpets/floor matsNo objects in the area around the pedalsKeep floor mats, carpets, and any other
objects out of the area of motion of the pedals;otherwise, the function of the pedals could beimpeded while driving
Do not place additional floor mats over existingmats or other objects.Only use floor mats that have been approvedfor the vehicle and can be properly fixed inplace.Ensure that the floor mats are securely fastenedagain when they are returned after being re‐moved, such as for cleaning.◀
Floor mats can be removed for cleaning.If they are very dirty, clean with a microfibercloth and water or an interior cleaner. To pre‐vent matting of the carpet, rub back and forthin the direction of travel only.
DisplaysTo clean the displays, such as the radio or dis‐play elements, use an antistatic microfibercloth.
Cleaning displaysDo not use chemical or household cleans‐
ers.Keep all fluids and moisture away from theunit.Otherwise, they could affect or damage surfa‐ces or electrical components.Avoid pressing too hard when cleaning and donot use abrasive materials; otherwise, damagecan result.◀
CD/DVD drivesNo cleaning CDDo not use cleaning CDs; otherwise, parts
of the drive may become damaged.◀
Long-term vehicle storageYour service center can advise you on what toconsider when storing the vehicle for longerthan three months.
Seite 189
Care Mobility
189Online Edition for Part no. 01 40 2 911 521 - VI/13
Indicator/warning lampsVehicle equipmentThis chapter describes all series equipment aswell as country-specific and special equipmentoffered for this model series.Therefore, it also
describes equipment that may not be found inyour vehicle, for instance due to the selectedspecial equipment or the country version. Thisalso applies to safety-related functions and sys‐tems.
OverviewThe indicator and warning lamps can light up ina variety of combinations and colors in displayarea 1 or 2. The table contains information oncauses and how to respond. Note whether alamp lights up alone or in combination with an‐other. Some lamps can light up in different col‐ors. Corresponding distinctions are made in thetext.
1 2 Cause How to respond
Turn signal
The high beams/headlamp flasher areswitched on.
The front fog lamps are switched on.
The rear fog lamps are switched on.
Fasten safety belts. Fasten safety belt, refer to page 41.
External temperature warning Drive conservatively, refer topage 59.
Lights up briefly:Approx. 2.1 US gal/8 liters of fuel remain inthe tank.Remains on:The remaining range is no more than30 miles/50 km, refer to page 60.
Seite 190
Mobility Indicator/warning lamps
190 Online Edition for Part no. 01 40 2 911 521 - VI/13
1 2 Cause How to respond
The engine refuses to start. Depress the brake or clutch to startthe engine, refer to page 50.
The ignition is switched on and driver's dooris open.
Switch off the ignition, refer topage 49, or close the driver's door.
The lights are still switched on. Switch off the lights, refer topage 67.
The roadside parking lamps are still on. Switch off the roadside parkinglamps, refer to page 68.
A door is open.
The hood is open.
The tailgate is open.
The fuel cap is missing or loose. Make sure that the fuel cap is cor‐rectly positioned and close it until itclicks audibly. Do not jam the strapbetween the fuel cap and the vehi‐cle.
The windshield washer fluid level is too low. Add washer fluid, refer to page 55,as soon as possible.
Lights up in red:
Service is due. Arrange a service appointment.Check the service requirements, re‐fer to page 169.
Lights up in yellow:
The engine will start the next time the Start/Stop button is touched, possibly without thebrake or clutch being depressed
Seite 191
Indicator/warning lamps Mobility
191Online Edition for Part no. 01 40 2 911 521 - VI/13
1 2 Cause How to respond
The remote control is malfunctioning or, incars with Comfort Access, was not detected.
The engine cannot be started. Havethe remote control checked, if nec‐essary.
The battery in the remote control is dis‐charged.
Use the remote control for a longerjourney or, in cars with Comfort Ac‐cess, replace the battery.
The belt tensioners and/or airbag systemhas failed.
Have the system checked immedi‐ately.Fasten the safety belts anyway.
Steering assistance has failed. You can continue your journey, butmoderate your speed and exercisedue caution. Markedly differentsteering response. Have the systemchecked as soon as possible.
Lights up in red:
Engine malfunction Stop the car and switch off the en‐gine. You cannot continue yourjourney. Contact your service cen‐ter.
Lights up in yellow:
Full engine power is no longer available. You can continue your journey, butmoderate your speed and exercisedue caution. Have the enginechecked as soon as possible.
Indicator lamp 1 flashes:
Engine malfunction under high load. Highengine load will result in damage to the cat‐alytic converter.
You can continue your journey, butmoderate your speed and exercisedue caution. Have the vehiclechecked immediately.
Indicator lamp 1 lights up:
Engine malfunction with adverse effect onemissions.
You can continue your journey, butmoderate your speed and exercisedue caution. Have the vehiclechecked as soon as possible.
Seite 192
Mobility Indicator/warning lamps
192 Online Edition for Part no. 01 40 2 911 521 - VI/13
1 2 Cause How to respond
Lights up in red:
The engine is overheating. Carefully bring the car to a stop,switch off the engine and allow it tocool down. Do not open the hood;otherwise, there would be a risk ofinjury due to scalding. Contact yourservice center.
Lights up in yellow:
The engine is too hot. Continue driving at more moderatespeed so that the engine can cooldown. Have the engine checkedwithout delay if the situation reoc‐curs.
Lights up in red:
Battery is no longer being charged. Alterna‐tor malfunction.
Switch off all unnecessary electricalconsumers. Have the power supplysystem checked without delay.
Lights up in yellow:
The battery charge level is very low, the bat‐tery is old or is not securely connected.
Charge the battery by taking a longdrive or using an external charger.If necessary, switch off automaticpower consumers. Have the batterychecked as soon as possible.
Indication in US modelsThe handbrake is set.
Indication in Canadian modelsThe handbrake is set.
Indication in US modelsThe handbrake is set while driving.
Release the handbrake.
Indication in Canadian modelsThe handbrake is set while driving.
Release the handbrake.
Seite 193
Indicator/warning lamps Mobility
193Online Edition for Part no. 01 40 2 911 521 - VI/13
1 2 Cause How to respond
Indication in US models
Lights up in red:The brake fluid level is too low.
Reduced braking effect, stop thecar carefully. Contact the nearestservice center.
Indication in Canadian models
Lights up in red:The brake fluid level is too low.
Reduced braking effect, stop thecar carefully. Contact the nearestservice center.
Indication in US models.
Brake pads worn. Have the condition of the brakepads checked without delay.
Indication in Canadian models
Brake pads worn. Have the condition of the brakepads checked without delay.
Indication in US models
The vehicle electronics have failed. You cannot continue your journey.Contact your service center.
Indication in Canadian models
The vehicle electronics have failed. You cannot continue your journey.Contact your service center.
Seite 194
Mobility Indicator/warning lamps
194 Online Edition for Part no. 01 40 2 911 521 - VI/13
1 2 Cause How to respond
Lights up in red: Have the system in questionchecked immediately.
The starter has failed or The engine cannot be restarted.
Ignition malfunctioning. The engine canonly be restarted when the brake is de‐pressed orLighting system failed. Low beams/taillamps and brake lights still operational. Allother lamps failed.
Depress the brake to restart the en‐gine.
Lights up in yellow:
Brake light control failed orThe fuel supply is malfunctioning.
You can continue your journey, butmoderate your speed and exercisedue caution. Have the system inquestion checked immediately.
Drive malfunctioning. You can continue your journey, butmoderate your speed and exercisedue caution. Transmission limp-home program with reduced accel‐eration is active. Have the systemchecked immediately.
Flashing:Dynamic Stability Control DSC or DynamicTraction Control DTC is controlling drive andbraking forces, refer to page 81.
Dynamic Traction Control DTC is activated,refer to page 82.
Dynamic Stability Control DSC and DynamicTraction Control DTC are deactivated, referto page 81.
Driving stability limited during ac‐celeration and cornering.Driving style must be readjusted.
Dynamic Stability Control DSC and DynamicTraction Control DTC failed.
Driving stability limited during ac‐celeration and cornering.You can continue your journey, butmoderate your speed and exercisedue caution. Have the systemchecked as soon as possible.
Seite 195
Indicator/warning lamps Mobility
195Online Edition for Part no. 01 40 2 911 521 - VI/13
1 2 Cause How to respond
ALL4 all-wheel drive failed. It is possible to continue driving.Drive cautiously and defensively.Avoid operating on poor roads andusing the full throttle and kickdownpositions of the accelerator. Havethe system checked immediately.
ALL4 all-wheel drive and DSC failed. It is possible to continue driving.Drive cautiously and defensively.Avoid operating on poor roads andusing the full throttle and kickdownpositions of the accelerator. Havethe system checked immediately.
Indication in US models
The driving stability control systems includ‐ing ABS and the Tire Pressure Monitor dis‐play have failed, refer to page 81.
Reduced braking and driving stabil‐ity. Drive cautiously and defen‐sively. Avoid full brake application,operation on poor roads, and useof the full throttle and kickdownpositions of the accelerator. Havethe system checked immediately.
Indication in US models
The driving stability control systems includ‐ing ABS, ALL4 all-wheel drive, and the TirePressure Monitor display have failed, referto page 81.
Reduced braking and driving stabil‐ity. Drive cautiously and defen‐sively. Avoid full brake application,operation on poor roads, and useof full throttle and kickdown posi‐tions of the accelerator. Have thesystem checked immediately.
Seite 196
Mobility Indicator/warning lamps
196 Online Edition for Part no. 01 40 2 911 521 - VI/13
1 2 Cause How to respond
Indication in Canadian models
The driving stability control systems includ‐ing ABS and the Flat Tire Monitor or the TirePressure Monitor have failed, refer topage 81.
Reduced braking and driving stabil‐ity. Drive cautiously and defen‐sively. Avoid full brake application,operation on poor roads, and useof full throttle and kickdown posi‐tions of the accelerator. Have thesystem checked immediately.
Indication in Canadian models
The driving stability control systems includ‐ing ABS, ALL4 all-wheel drive, and the FlatTire Monitor or the Tire Pressure Monitorhave failed, refer to page 81.
Reduced braking and driving stabil‐ity. Drive cautiously and defen‐sively. Avoid full brake application,operation on poor roads, and useof full throttle and kickdown posi‐tions of the accelerator. Have thesystem checked immediately.
In vehicles with the Flat Tire Monitor
Light up in yellow and red:
A tire is deflated. Carefully bring the car to a stop.Additional information, refer topage 75.
The Flat Tire Monitor was not initialized. Initialize the Flat Tire Monitor, referto page 75.
Light up in yellow:
Flat Tire Monitor failed. Punctures are notindicated.
Have the system checked.
Seite 197
Indicator/warning lamps Mobility
197Online Edition for Part no. 01 40 2 911 521 - VI/13
1 2 Cause How to respond
In vehicles with the Tire Pressure Monitor
Light up in yellow and red:
There is a flat tire or substantial loss of tirepressure.
Carefully bring the car to a stop.Additional information, refer topage 77.
In vehicles with the Tire Pressure Monitor
Light up in yellow:
Tire Pressure Monitor not initialized. Check the inflation pressure and re‐set the system, refer to page 77.
The small lamp flashes yellow and thenstays on, the large lamp lights up in yellow:
Tire Pressure Monitor failed. Punctures arenot indicated.
Have the system checked.
A wheel without TPM electronics ismounted.
Have the system checked.
TPM is temporarily malfunctioning due toother systems or devices using the sameradio frequency.
In vehicles with the Tire Pressure Monitor
The small lamp flashes yellow and thenstays on, the large lamp lights up in yellow:
Tire Pressure Monitor failed. Punctures arenot indicated.
Have the system checked.
A wheel without TPM electronics ismounted.
Have the system checked.
Lights up in red:
Transmission limp-home program activewith restricted range of gears, possibly withreduced acceleration.
You can continue your journey, butmoderate your speed and exercisedue caution. Have the systemchecked immediately.
Seite 198
Mobility Indicator/warning lamps
198 Online Edition for Part no. 01 40 2 911 521 - VI/13
1 2 Cause How to respond
Gears can be engaged without depressingthe brake.
Always depress the brake to en‐gage a gear.
Automatic selector lever locked: Manually unlock the selector leverlock, refer to page 58.
Lights up in yellow: Have the system checked as soonas possible.
Automatic selector lever locked:The selector lever is locked in position Pwith the engine running or the ignitionswitched on and the brake depressed or
Manually unlock the selector leverlock, refer to page 58.
The brake signal is malfunctioning: a gearcan be engaged without depressing thebrake.
To engage a gear while the vehicleis at a standstill, always depress thebrake. Before leaving the vehicle,move the selector lever to positionP and switch off the engine.
Lights up in red:
The transmission is overheating. Bring the car to a stop and movethe selector lever to position P. Al‐low the transmission to cool down.You can continue your journey, butmoderate your speed and exercisedue caution. Have the systemchecked if the situation reoccurs.
Lights up in yellow:
The transmission is too hot. Avoid high engine loads. You cancontinue your journey, but moder‐ate your speed and exercise duecaution.
Selector lever position P not engaged. Thevehicle is not secured against rolling.
Selector lever position P not engaged. Theignition cannot be switched off.
Engage selector lever position Pwhen you wish to switch off the ig‐nition, refer to page 49.
Seite 199
Indicator/warning lamps Mobility
199Online Edition for Part no. 01 40 2 911 521 - VI/13
1 2 Cause How to respond
The cruise control system has failed. Have the system checked.
The Park Distance Control has failed. Have the system checked.
A bulb of the exterior lighting system hasfailed.
Have the exterior lighting checkedas soon as possible.
A low-beam headlamp or front fog lamp hasfailed.
Have the lights checked as soon aspossible.
A high-beam headlamp has failed. Have the high-beam headlampschecked.
A rear fog lamp has failed. Have the rear fog lamps checked.
The headlamp beam throw adjustment hasfailed.
Have the headlamp beam throwadjustment system checked.
The Adaptive Light Control has failed.
The coolant level is too low. Add coolant immediately, refer topage 168.
The engine oil pressure is too low. Stop immediately and switch offthe engine. You cannot continueyour journey. Contact your servicecenter.
Lights up in red:
The service appointment is overdue. Arrange a service appointment.Check the service requirements, re‐fer to page 64.
Lights up in yellow:
Service is due. Arrange a service appointment.Check the service requirements, re‐fer to page 64.
Seite 200
Mobility Indicator/warning lamps
200 Online Edition for Part no. 01 40 2 911 521 - VI/13
1 2 Cause How to respond
No service due.
The set speed limit was exceeded.
The time and date are no longer correct. Set the time and date, refer topage 63.
Seite 201
Indicator/warning lamps Mobility
201Online Edition for Part no. 01 40 2 911 521 - VI/13
At a glance
Controls
Driving tips
Entertainment
Communication
Mobility
Reference
Online Edition for Part no. 01 40 2 911 521 - VI/13
Technical dataVehicle equipmentThis chapter describes all series equipment aswell as country-specific and special equipmentoffered for this model series.Therefore, it also
describes equipment that may not be found inyour vehicle, for instance due to the selectedspecial equipment or the country version. Thisalso applies to safety-related functions and sys‐tems.
Engine specifications
Cooper Cooper S John Cooper Works
Displacement cu in/cm³ 97.5/1,598 97.5/1,598 97.5/1,598
No. of cylinders 4 4 4
Maximum output hp 121 181 208
at engine speed rpm 6,000 5,500 6,000
Maximum torque lb ft/Nm 114/155 177/240 207/280
with overboost – 192/260 221/300
at engine speed rpm 4,250 1,600-5,000 1,900-5,500
with overboost – 1,700-4,500 2,100-4,500
Overboost briefly increases the highest torque during rapid acceleration, for example when pass‐ing another vehicle.
DimensionsMINI Countryman
MINI Countryman Cooper Cooper S John Cooper Works
Width with mirrors inches/mm 78.5/1,995 78.5/1,995 78.6/1,996
Width without mirrors inches/mm 70.4/1,789 70.4/1,789 70.4/1,789
Height without roof antenna inches/mm 61.5/1,561 61.5/1,561 61.5/1,561
Length inches/mm 161.7/4,108 161.8/4,110 163.2/4,144
Seite 204
Reference Technical data
204 Online Edition for Part no. 01 40 2 911 521 - VI/13
MINI Countryman Cooper Cooper S John Cooper Works
Wheelbase inches/mm 102.2/2,595 102.2/2,595 102.2/2,596
Smallest turning circle dia. ft/m 38.1/11.6 38.1/11.6 38.1/11.6
MINI Paceman
MINI Paceman Cooper Cooper S John Cooper Works
Width with mirrors inches/mm 78.6/1,996 78.6/1,996 78.6/1,996
Width without mirrors inches/mm 70.3/1,786 70.3/1,786 70.3/1,786
Height without roof antenna inches/mm 59.8/1,518 59.9/1,522 60.1/1,527
Length inches/mm 162.2/4,120 162.2/4,120 162.8/4,134
Wheelbase inches/mm 102.2/2,596 102.2/2,596 102.2/2,596
Smallest turning circle dia. ft/m 38.1/11.6 38.1/11.6 38.1/11.6
WeightsNever exceed either the approved axle loads orthe gross vehicle weight.
MINI Countryman
Cooper Cooper S
Curb weight, road ready, with maximum special equipment
Manual transmission lbs/kg 2,954/1,340 3,053/1,385
Automatic transmission lbs/kg 3,020/1,370 3,097/1,405
Approved gross vehicle weight
Manual transmission lbs/kg 3,858/1,750 3,990/1,810
Automatic transmission lbs/kg 3,924/1,780 4,034/1,830
Load lbs/kg 860/390 860/390
Approved front axle load
Manual transmission lbs/kg 2,050/930 2,127/965
Automatic transmission lbs/kg 2,116/960 2,172/985
Approved rear axle load lbs/kg 1,918/870 1,918/870
Seite 205
Technical data Reference
205Online Edition for Part no. 01 40 2 911 521 - VI/13
Cooper Cooper S
Approved roof load capacity lbs/kg 165/75 165/75
Cargo area capacity cu ft/liter 12.4–41.3/ 350–1,170 12.4–41.3/ 350–1,170
Cooper S ALL4 John Cooper Works
Curb weight, road ready, with maximum special equipment
Manual transmission lbs/kg 3,208/1,455 3,263/1,480
Automatic transmission lbs/kg 3,252/1,475 3,307/1,500
Approved gross vehicle weight
Manual transmission lbs/kg 4,101/1,860 4,156/1,885
Automatic transmission lbs/kg 4,145/1,880 4,200/1,905
Load lbs/kg 860/390 860/390
Approved front axle load
Manual transmission lbs/kg 2,183/990 2,183/990
Automatic transmission lbs/kg 2,227/1,010 2,227/1,010
Approved rear axle load lbs/kg 2,017/915 2,072/940
Approved roof load capacity lbs/kg 165/75 165/75
Cargo area capacity cu ft/liter 12.4–41.3/ 350–1,170 12.4–41.3/ 350–1,170
MINI Paceman
Cooper Cooper S Cooper S ALL4 John Cooper Works
Curb weight, road ready, with maximum special equipment
Manual transmission lbs/kg 2,940/1,334 3,070/1,393 3,210/1,456 3,260/1,479
Automatic transmis‐sion
lbs/kg 3,010/1,365 3,110/1,411 3,260/1,479 3,310/1,501
Approved gross vehicle weight
Manual transmission lbs/kg 3,850/1,746 3,960/1,796 4,100/1,860 4,150/1,882
Automatic transmis‐sion
lbs/kg 3,920/1,778 4,010/1,819 4,140/1,878 4,200/1,905
Load lbs/kg 850/386 850/386 850/386 850/386
Seite 206
Reference Technical data
206 Online Edition for Part no. 01 40 2 911 521 - VI/13
Cooper Cooper S Cooper S ALL4 John Cooper Works
Approved front axle load
Manual transmission lbs/kg 2,050/930 2,120/962 2,180/989 2,200/998
Automatic transmis‐sion
lbs/kg 2,120/962 2,170/984 2,220/1,007 2,240/1,016
Approved rear axleload
lbs/kg 1,910/866 1,910/866 2,020/916 2,060/934
Approved roof load ca‐pacity
lbs/kg 165/75 165/75 165/75 165/75
Cargo area capacity cu ft/liter
11.6–38.1/330–1,080
11.6–38.1/330–1,080
11.6–38.1/330–1,080
11.6–38.1/330–1,080
Capacities
Notes
Fuel tank US gal/liters Approx. 12.4/approx. 47
Fuel quality, refer topage 150
Including reserve of US gal/liters Approx. 2.1/approx. 8
Seite 207
Technical data Reference
207Online Edition for Part no. 01 40 2 911 521 - VI/13
Everything from A to ZIndexAABS, Antilock Brake Sys‐
tem 81 Acoustic signal, refer to Check
Control 65 Activated charcoal filter with
automatic climate con‐trol 91
Adaptive Light Control 69 Additives, engine oil 167 Airbags 72 Airbags, indicator/warning
light 75 Air circulation, refer to Recir‐
culated air mode 88, 90 Air conditioner 87 Air conditioning 87 Air conditioning mode– Air conditioner 87– Automatic climate con‐
trol 89Air distribution– Automatic 90– Individual 88– Manual 88, 90Air drying, refer to Cooling
function 91 Air flow rate 87, 90 Air pressure, refer to Tire infla‐
tion pressure 152 Air supply– Air conditioner 87– Automatic climate con‐
trol 89Alarm system 32 Alarm system– Avoiding unintentional
alarms 32– Interior motion sensor 32– Tilt alarm sensor 32ALL4 all-wheel system 83
All-wheel drive, refer toALL4 83
Alternating-code hand-heldtransmitter 93
Ambient lighting 71 Antifreeze, washer fluid 55 Antilock Brake System,
ABS 81 Anti-slip control, refer to Dy‐
namic Stability ControlDSC 81
Anti-theft protection 23 Approved engine oils 167 Ashtray 96 Assistance, roadside 180 Assistance when driving off,
refer to Hill drive-off assis‐tant 83
Assistance with starting en‐gine, refer to Jump-start‐ing 180
Automatic– Air distribution 90– Air flow rate 90Automatic car wash 186 Automatic climate control– Automatic air distribution 90Automatic, cruise control 84 Automatic headlamp con‐
trol 67 Automatic transmission withSteptronic– Kickdown 57– Overriding selector lever
lock 58AUTO program with auto‐
matic climate control 90 AUX-IN port 130 Average fuel consumption 61 Average fuel consumption– Setting the units 62
Average speed 61 Average speed, refer to Com‐
puter 60
BBackrest curvature, refer to
Lumbar support 37 Backrests, refer to Seats 36 Backup lamps, bulb replace‐
ment 175 Battery– Disposal 32– Remote control 22Battery, refer to Vehicle bat‐
tery 178 Battery replacement– Remote control 32Belts, refer to Safety belts 38 Belt tensioners, refer to Safety
belts 38 Bi-xenon headlamps 172 Blower, refer to Air flow
rate 87, 90 Brake assistant 81 Brake discs, breaking in 110 Brake fluid, refer to Service re‐
quirements 64 Brake force distribution, elec‐
tronic 81 Brake pads, breaking in 110 Brakes– Handbrake 51Brakes, MINI maintenance
system 169 Brakes, service require‐
ments 64 Brake system, MINI mainte‐
nance system 169 Braking, notes 111
Seite 208
Reference Everything from A to Z
208 Online Edition for Part no. 01 40 2 911 521 - VI/13
Breakdown assistance, Road‐side Assistance 180
Breaking in 110 Buckle tongue, rear– Height adjustment 39Button for starting the engine,
refer to Start/Stop button 49
CCalifornia Proposition 65
Warning 7 Car battery, refer to Vehicle
battery 178 Car care products 187 Care, displays 189 Care, vehicle 187 Cargo area– Comfort Access 30– Flat loading floor 99– Multi-function hook 101– Opening from the out‐
side 28– Partition net 100Cargo area, enlarging– Cargo cover 98Cargo area lamp, refer to Inte‐
rior lamps 70 Cargo area tailgate, refer to
Tailgate 28 Car horn, refer to Horn 14 Carpet, care 189 Car phone, refer to Tele‐
phone 136 Car wash 186 CBC, Cornering Brake Con‐
trol 81 CBS Condition Based Serv‐
ice 169 CD/DVD drives, care 189 Center armrest 103 Center console, refer to
Around the center con‐sole 17
Center rail 104 Center rail, refer to Storage
compartments 104
Central locking– Comfort Access 30– From the inside 27– From the outside 24Central locking system– Concept 23– From the outside 23Changes, technical, refer to
Safety 7 Changing wheels/tires 159 Check Control 65 Children, transporting 44 Child restraint fixing system
LATCH 45 Child restraint fixing sys‐
tems 44 Child restraint fixing systems,
mounting 44 Child seat, mounting 44 Child seats, refer to Transport‐
ing children safely 44 Chrome parts, care 189 Circulation of air, refer to Re‐
circulated air mode 88, 90 Cleaning, displays 189 Cleaning, refer to Care 186 Climate 87 Climate mode– Ventilation 91Clock 59 Clock– 12h/24h format 62Closing– From the inside 27– From the outside 24Clutch, breaking in 110 Cockpit 14 Cold start, refer to Starting the
engine 50 Combination instrument, refer
to Displays 16 Combination switch, refer to
Turn signal/high beams/headlamp flasher 52
Combination switch, refer toWasher/wiper system 53
Comfort Access– In the car wash 31– Replacing the battery 32Comfort area, refer to Around
the center console 17 Compartment for remote con‐
trol, refer to Ignition lock 49 Compass, digital 94 Computer 60 Computer, displaying informa‐
tion 60 Condition Based Service
CBS 169 Confirmation signals for vehi‐
cle locking/unlocking 25 Consumption, refer to Aver‐
age fuel consumption 61 Control Display, care 189 Controls and displays 14 Control systems, driving stabil‐
ity 81 Convenient operation– Windows 25Coolant temperature 60 Cooling function, switching on
and off 91 Cooling, maximum 90 Cornering Brake Control,
CBC 81 Corrosion on brake discs 112 Cradle for telephone or mobile
phone, refer to Snap-inadapter 143
Cruise control 84 Cupholders 96 Current fuel consumption 61 Curve lights, refer to Adaptive
Light Control 69 Cylinders, number of, refer to
Engine data 204
DDashboard lighting, refer to
Instrument lighting 70 Dashboard, refer to Cock‐
pit 14
Seite 209
Everything from A to Z Reference
209Online Edition for Part no. 01 40 2 911 521 - VI/13
Dashboard, refer to Dis‐plays 16
Data, technical 204 Date– Display format 62– Setting 63Daytime running lights 68 Decorative trim, care 189 Defogging windows 88 Defroster– Rear window 88, 91Defrosting windows 88 Defrost setting, refer to De‐
frosting windows 88 Digital compass 94 Dip stick, engine oil 166 Directional indicators, refer to
Turn signals 52 Displacement, refer to Engine
data 204 Display lighting, refer to In‐
strument lighting 70 Displays 16 Displays and controls 14 Displays, care 189 Displays, cleaning 189 Displays, refer to Instrument
cluster 16 Disposal– Remote control battery 32Distance warning, refer to
Park Distance ControlPDC 85
Door key, refer to Remotecontrol with integratedkey 22
Door lock 26 Door lock, confirmation sig‐
nals 25 Doors, manual operation 27 Doors, unlocking and locking– Confirmation signals 25– From the inside 27– From the outside 24DOT Quality Grades 156 Drive-off assistant, refer to Hill
drive-off assistant 83
Driving notes, breakingin 110
Driving off on hills, refer to Hilldrive-off assistant 83
Driving on poor roads 113 Driving stability control sys‐
tems 81 Driving tips, refer to Driving
notes 110 Dry air, refer to Cooling func‐
tion 91 DSC Dynamic Stability Con‐
trol 81 DTC Dynamic Traction Con‐
trol 82 Dynamic Stability Control
DSC 81 Dynamic Traction Control
DTC 82
EElectrical malfunction– Door lock 27– Fuel filler flap 148Electronic brake-force distri‐
bution 81 Electronic Stability Program
ESP, refer to Dynamic Stabil‐ity Control DSC 81
Emergency activation– Automatic transmission, re‐
fer to Overriding selectorlever lock 58
Emergency operation, fuelfiller flap, unlocking man‐ually 148
Emergency operation, refer toManual operation– Door lock 27Energy, saving, refer to Saving
fuel 118 Engine, breaking in 110 Engine compartment 164 Engine oil, adding 166 Engine oil, additives, refer to
Approved engine oils 167
Engine oil, alternative oiltypes 167
Engine oil change intervals,refer to Service require‐ments 64
Engine oil, dip stick 166 Engine oil, filling capacity 207 Engine oil, MINI maintenance
system 169 Engine oil types, alterna‐
tive 167 Engine oil types, ap‐
proved 167 Engine, overheating, refer to
Coolant temperature 60 Engine power, refer to Engine
data 204 Engine, RPM 204 Engine start, assistance 180 Engine, starting 50 Engine, starting– Comfort Access 30Engine, starting, Start/Stop
button 49 Engine, stopping, Start/Stop
button 49 Engine, switching off 51 Equipment, interior 92 ESP Electronic Stability Pro‐
gram, refer to Dynamic Sta‐bility Control DSC 81
Exchanging wheels/tires 159 Exterior mirrors 42 Exterior mirrors, adjusting 42 Exterior mirrors, folding in and
out 42 Exterior sensors, care 189 External temperature dis‐
play 59 External temperature display– Changing the units 62– On the computer 62External temperature warn‐
ing 59 Externel temperature dis‐
play 59
Seite 210
Reference Everything from A to Z
210 Online Edition for Part no. 01 40 2 911 521 - VI/13
FFailure messages, refer to
Check Control 65 False alarm, refer to Avoiding
unintentional alarms 32 Fastening safety belts, refer to
Safety belts 38 Fault messages, refer to Check
Control 65 Filling capacities 207 Filter– Refer to Activated-charcoal
filter 89– Refer to Microfilter 89– Refer to Microfilter/acti‐
vated-charcoal filter withautomatic climate control 91
First aid kit 180 First aid, refer to First aid
kit 180 Flashing when locking/unlock‐
ing 25 Flat tire– Flat Tire Monitor 76– Indicator/warning lamp 76– Run-flat tire 76– Tire Pressure Monitor
TPM 77Flat Tire Monitor FTM 75 Flat Tire Monitor FTM– Flat tire message 76– Initializing the system 75– Limits of the system 75– Snow chains 75Flat tire, wheel change 177 Floor mats, care 189 Fog lamps 70 Foot brake 111 Footwell lamps, refer to Inte‐
rior lamps 70 Four-wheel drive, refer to
ALL4 83 Front airbags 72 Front fog lamp, bulb replace‐
ment 173 Front fog lamps 70
Front lamps, bulb replace‐ment 173
Front passenger airbags, de‐activating 73
FTM Flat Tire Monitor 75 Fuel 150 Fuel– Refer to Average fuel con‐
sumption 61Fuel, additives 150 Fuel, average consump‐
tion 61 Fuel cap, closing 148 Fuel consumption display– Average fuel consump‐
tion 61Fuel filler flap, closing 148 Fuel filler flap, opening 148 Fuel filler flap, unlocking in
case of an electrical malfunc‐tion 148
Fuel gauge 60 Fuel, saving 118 Fuel tank capacity, refer to
Filling capacities 207 Fuel tank contents, refer to
Filling capacities 207 Fuel tank, refer to Filling ca‐
pacities 207 Fuse 178
GGarage door opener, refer to
Universal garage dooropener 92
Gasoline 150 Gasoline gauge, refer to Fuel
gauge 60 Gasoline quality 150 Gear change– Automatic transmission with
Steptronic 57Gear display, automatic trans‐
mission with Steptronic 56 Glass sunroof, electrical 32
Glass sunroof, electrical– Convenient operation 25– Opening, closing 33– Raising 33– Remote control 25
HHalogen headlamps, bulb re‐
placement 173 Hand car wash, care 187 Hand-held transmitter, alter‐
nating code 93 Hands-free microphone 17 Hazard warning system 17 Head airbags 72 Headlamp control, auto‐
matic 67 Headlamp courtesy delay fea‐
ture 69 Headlamp flasher 52, 68 Headlamps 67 Headlamps, care 187 Headlamps, cleaning, washer
fluid 55 Head restraints 41 Head restraints– Adjusting the height 41– Removing 41Heatable– Windshield 91Heating– Rear window 88, 91– Seats 38– Windshield 91Height adjustment– Seats 36High beams 68 High beams, bulb replace‐
ment 173 Hill drive-off assistant 83 Hills 112 Holder for remote control, re‐
fer to Ignition lock 49 Homepage 6 Hood 164 Hood, closing 165
Seite 211
Everything from A to Z Reference
211Online Edition for Part no. 01 40 2 911 521 - VI/13
Hood, opening 165 Hood, unlocking 165 Horn 14 Hydraulic brake assistant 81
IIce warning, refer to External
temperature warning 59 Icy roads, refer to External
temperature warning 59 Identification marks, run-flat
tires 160 Identification marks, tires 156 Ignition 49 Ignition key position 1, refer
to Radio ready state 49 Ignition key position 2, refer
to Ignition on 49 Ignition key, refer to Remote
control with integratedkey 22
Ignition lock 49 Ignition, switched off 50 Ignition, switched on 49 Indicator and warning
lamps 17 Indicator and warning lamps– Tire Pressure Monitor
TPM 78Indicator and warning lamps,
overview 190 Individual air distribution 88 Inflation pressure monitor, re‐
fer to Flat Tire Monitor 75 Inflation pressure monitor, re‐
fer to Tire Pressure MonitorTPM 77
Inflation pressure, refer to Tireinflation pressure 152
Initializing– Compass, refer to Calibrat‐
ing 95– Glass sunroof, electrical 33Initializing, Flat Tire Monitor
FTM 75
Instrument cluster, refer toDisplays 16
Instrument lighting 70 Instruments, refer to Cock‐
pit 14 Integrated key 22 Interior equipment 92 Interior lamps 70 Interior lamps– Remote control 26Interior mirror 43 Interior rearview mirror, com‐
pass 94 Interior temperature, setting– Air conditioner 87– Automatic climate con‐
trol 89Internet page 6
JJump-starting 180
KKeyless Go, refer to Comfort
Access 30 Keyless opening and closing,
refer to Comfort Access 30 Key Memory, refer to Personal
Profile 22 Key, refer to Remote control
with integrated key 22 Kickdown– Automatic transmission with
Steptronic 57Knee airbag 72 Knocking control 150
LLamp and bulb replacement,
bulb replacement 172 Lamp, replacing, refer to
Lamp and bulb replace‐ment 172
Lamps 67
Lamps, automatic headlampcontrol 67
Lamps, parking lamps/lowbeams 67
Lap-and-shoulder belt, referto Safety belts 38
LATCH child restraint fixingsystem 45
Leather, care 188 Leather care 188 LEDs, light-emitting di‐
odes 172 License plate lamp, bulb re‐
placement 175 Light-alloy wheels, care 189 Light-emitting diodes,
LEDs 172 Lighter– Socket 96Lighting– Instruments 70Lighting, lamp and bulb re‐
placement 172 Lighting, vehicle, refer to
Lamps 67 Light switch 67 Lock buttons on doors, refer
to Locking 27 Locking– From the inside 27– From the outside 25– Setting the confirmation sig‐
nal 25– Without remote control, re‐
fer to Comfort Access 30Locking, vehicle– From the inside 27– From the outside 24Longlife oils, alternative oil
types 167 Longlife oils, refer to Ap‐
proved engine oils 167 Low beams 67 Low beams– Automatic 67Low beams, automatic 67
Seite 212
Reference Everything from A to Z
212 Online Edition for Part no. 01 40 2 911 521 - VI/13
Low beams, bulb replace‐ment 173
Lower back support, refer toLumbar support 37
Lumbar support 37
MMain inspection, refer to Serv‐
ice requirements 64 Maintenance, refer to Service
booklet Maintenance, refer to Service
requirements 64 Maintenance require‐
ments 169 Maintenance system
MINI 169 Malfunction– Automatic transmission with
Steptronic 58– Door lock 27– Fuel filler flap 148Malfunction warnings, refer to
Check Control 65 Manual air distribution 88, 90 Manual mode, automatic
transmission with Step‐tronic 57
Manual operation– Door lock 27– Selector lever lock, auto‐
matic transmission 58Manual operation, fuel filler
flap 148 Manual transmission 56 Marking on approved
tires 159 Maximum cooling 90 Maximum speed, winter
tires 160 Microfilter 89 Microfilter– With automatic climate con‐
trol 91MINI Homepage 6 MINI Internet page 6
MINI maintenance sys‐tem 169
MINI Mobility System 161 Minimum tread, tires 158 Mirrors 42 Mirrors, folding in and out 42 Mirrors, interior mirror 43 Mobile communication devi‐
ces in the vehicle 111 Mobile phone, refer to Tele‐
phone 136 Mobility System 161 Modifications, technical, refer
to Safety 7 Mounting of child restraint fix‐
ing systems 44
NNeck restraints, refer to Head
restraints 41 New wheels and tires 159 Notes 6 Nozzles, refer to Ventila‐
tion 91
OOBD Onboard Diagnos‐
tics 170 OBD socket, refer to Socket
for OBD Onboard Diagno‐sis 170
Octane number, refer to Fuelquality 150
Octane rating, refer to Gaso‐line quality 150
Odometer 59 Oil additives 167 Oil level 166 Oil types, alternative 167 Oil types, approved 167 Onboard Diagnostics
OBD 170
Opening and closing– Comfort Access 30– From the inside 27– From the outside 24– Using the door lock 26– Via the remote control 24Opening and unlocking– From the inside 27Outside air mode– Automatic climate con‐
trol 90Outside air, refer to Recircu‐
lated air mode 88, 90 Overheating of engine, refer
to Coolant temperature 60
PPark Distance Control PDC 85 Parking aid, refer to Park Dis‐
tance Control PDC 85 Parking assistant, refer to Park
Distance Control PDC 85 Parking brake, refer to Hand‐
brake 51 Parking lamp, bulb replace‐
ment 173 Parking lamps 67 Parking lamps/low beams 67 PDC Park Distance Control 85 Personal Profile 22 Pinch protection– Windows 34Plastic, care 188 Pollen– Refer to Microfilter 89– Refer to Microfilter/acti‐
vated-charcoal filter 89– Refer to Microfilter/acti‐
vated-charcoal filter withautomatic climate control 91
Poor road operation 113 Power, refer to Engine
data 204 Power windows 34 Power windows, refer to Win‐
dows 33
Seite 213
Everything from A to Z Reference
213Online Edition for Part no. 01 40 2 911 521 - VI/13
Prescribed engine oils, refer toApproved engine oils 167
Pressure monitoring of tires,refer to Tire Pressure MonitorTPM 77
Pressure, tires 152 Pressure warning, tires 75 Profile depth, refer to Mini‐
mum tread depth 158 Profile, tires 157 Protective function, refer toPinch protection– Windows 34
RRadio MINI Boost CD 122 Radio-operated key, refer to
Remote control withintegrated key 22
Radio ready state 49 Radio ready state, switched
off 50 Radio ready state, switched
on 49 Radio setting, refer to Radio
ready state 49 Rain sensor 53 Range 61 Rear 37 Rear fog lamp, bulb replace‐
ment 175 Rear lamps, refer to Tail
lamps 175 Rear seat backrests, folda‐
ble 98, 99 Rearview mirror, refer to Mir‐
rors 42 Rear window defroster 88, 91 Rear window, washing 55 Rear window wiper 55 Recirculated air mode 88, 90 Recommended tire
brands 159 Releasing, refer to Unlock‐
ing 30
Remaining range for service,refer to Service require‐ments 64
Remaining range, refer toRange 61
Remote control– Battery replacement 32– Comfort Access 30– Malfunctions 26, 31Remote control, removing
from the ignition lock 49 Remote control, service
data 169 Remote control, universal 92 Replacement remote con‐
trol 22 Replacing wheels/tires 159 Reporting safety defects 9 Reserve warning, refer to Fuel
gauge 60 Reservoir for washer fluid, re‐
fer to Washer fluid reser‐voir 55
Restraining systems– Refer to Safety belts 38Restraint systems for chil‐
dren 44 Retreaded tires 159 Reverse gear, manual trans‐
mission 56 Roadside Assistance 180 Roadside parking lamp, bulb
replacement 173 Roadside parking lamps 68 RON gasoline quality 150 RON, refer to Fuel quality 150 RPM, refer to Engine data 204 Rubber seals, care 188 Run-flat tires 160 Run-flat tires– Flat tire 76Run-flat tires, tire inflation
pressure 152 Running lights, refer to Park‐
ing lamps/low beams 67
SSafe braking 111 Safety 7 Safety belts 38 Safety belts– Damage 41– Rear center safety belt 39Safety belts, care 189 Safety belts, indicator/warning
lamp 41 Safety belts, reminder 41 Safety systems– Safety belts 38Safety systems, airbags 72 Saving fuel 118 Seat adjustment 37 Seat adjustment– Manual 36Seat belts– Refer to Safety belts 38Seat heating 38 Seats– Adjusting 36– Heating 38– Sitting safely 36Selector lever, automatic
transmission with Step‐tronic 57
Selector lever lock, overrid‐ing 58
Selector lever lock, refer toChanging selector lever posi‐tions, Shiftlock 57
Selector lever positions, auto‐matic transmission withSteptronic 57
Service and warranty 8 Service data in the remote
control 169 Service interval display, refer
to Condition Based ServiceCBS 169
Service interval display, referto Service requirements 64
Service requirements 64
Seite 214
Reference Everything from A to Z
214 Online Edition for Part no. 01 40 2 911 521 - VI/13
Service requirements, CBSCondition Based Service 169
Settings– Clock, 12h/24h format 62Settings and information 61 Settings, configuring, refer to
Personal Profile 22 Shifting– Automatic transmission with
Steptronic 57Shifting, manual transmis‐
sion 56 Shift lever– Automatic transmission with
Steptronic 57Shift paddles on the steering
wheel 58 Side airbags 72 Side windows, refer to Win‐
dows 33 Sliding/tilting sunroof– Refer to Glass sunroof, elec‐
trical 32Slot for remote control 49 Snap-in adapter, mobile
phone 143 Socket, OBD Onboard Diagno‐
sis 170 Special equipment, series
equipment 6 Speed, average 61 Speedometer 16 Speed, with winter tires 160 Sport button 83 Sport program, automatic
transmission with Step‐tronic 57
Stability control systems 81 Start/Stop button 49 Start/Stop button, starting the
engine 50 Start/Stop button, switching
off the engine 51 Starting the engine 50 Start problems, refer to Jump-
starting 180 Steering wheel 43
Steering wheel– Shift paddles 58Steering wheel, adjusting 43 Steering wheel lock 49 Stopping, engine 51 Storage, tires 160 Storing the vehicle 189 Summer tires, refer to Wheels
and tires 152 Summer tires, tread 157 Switches, refer to Cockpit 14 Switching off, engine 51 Switching off, vehicle 51 Symbols 6
TTachometer 60 Tailgate 28 Tailgate– Comfort Access 30– Opening/closing 28– Opening from the out‐
side 28Tail lamps 175 Tank gauge, refer to Fuel
gauge 60 Technical changes, refer to
Safety 7 Technical data 204 Telephone 136 Temperature– Air conditioner 88– Automatic climate con‐
trol 90Temperature, coolant, refer to
Coolant temperature 60 Temperature display– External temperature 59– External temperature warn‐
ing 59– Setting the units 62Temperature warning 59 Theft alarm system, refer to
Alarm system 32 Time– Setting the time 63
Tire age 158 Tire identification marks 156 Tire inflation pressure 152 Tire inflation pressure– Pressure loss 76Tire pressure monitor, refer to
Flat Tire Monitor 75 Tire Pressure Monitor TPM– System limits 77– System reset 78– Warning lamp 78Tire Quality Grading 156 Tires– Flat tire 76– Inflation pressure 152– Inflation pressure loss 78– Pressure monitoring, refer to
Tire Pressure MonitorTPM 77
Tires, breaking in 110 Tires, changing 159 Tires, condition 157 Tires, damage 158 Tire size 156 Tires, minimum tread 158 Tires, retreaded tires 159 Tires, storage 160 Tire tread 157 Torque, refer to Engine
data 204 Towing another vehicle 182 Towing, being towed 182 Tow-starting 182 TPM, refer to Tire Pressure
Monitor 77 Traction control 82 Transmission– Overriding selector lever
lock in case of automatictransmission with Step‐tronic 58
Transmission lock– Refer to Changing selector
lever positions 57Transmission, manual 56 Transporting children
safely 44
Seite 215
Everything from A to Z Reference
215Online Edition for Part no. 01 40 2 911 521 - VI/13
Trip-distance counter, refer toTrip odometer 59
Triple turn signal activa‐tion 52
Trip odometer 59 Trunk lid, refer to Tailgate 28 Trunk, refer to Cargo area 28 Turning lamps, refer to Adap‐
tive Light Control 69 Turn signal– Indicator lamp 16Turn signal, bulb replace‐
ment 173 Turn signals 52 Turn signals, triple turn signal
activation 52
UUniform Tire Quality Grading/
UTQG 156 Unintentional alarms, avoid‐
ing 32 Units– Average fuel consump‐
tion 62– Temperature 62Universal remote control 92 Unlocking– From the inside 27– From the outside 24– Tailgate 30– Without remote control, re‐
fer to Comfort Access 30Upholstery care 188 Upholstery material care 188 USB audio interface 131
VVehicle battery 178 Vehicle, breaking in 110 Vehicle care 187 Vehicle care, refer to
Care 186 Vehicle equipment 6 Vehicle paintwork, care 188
Vehicle storage 189 Vehicle, switching off 51 Vehicle wash 186 Ventilation– Air conditioning 91
WWarning and indicator
lamps 17 Warning and indicator lamps,
overview 190 Warning messages, refer to
Check Control 65 Warning triangle 180 Washer/wiper system 53 Washer/wiper system, rain
sensor 53 Washer/wiper system, washer
fluid 55 Washer fluid 55 Washer fluid reservoir 55 Washing, vehicle 186 Welcome lamps 69 Wheel change 177 Wheels and tires 152 Wheels, changing 159 Wheels, Flat Tire Monitor
FTM 75 Windows– Closing 34– Convenient operation 25– Opening 34Windows, care 187 Windows, defrosting and de‐
fogging 88 Windows, pinch protection 34 Windshield– Defrosting and defogging 88Windshield, defrosting, refer
to Defrosting windows 88 Windshield wash 53 Windshield washer fluid 55 Windshield wash, rear win‐
dow 55 Windshield wash, reservoir for
washer fluid 55
Windshield wash, washerfluid 55
Windshield wiper blades,changing 171
Windshield wiper, refer toWasher/wiper system 53
Winter storage, care 189 Winter tires 159 Winter tires, tread 157 Wiper blades, care 187 Wiper blades, changing 171 Wiper fluid 55
YYour individual vehicle– Settings, refer to Personal
Profile 22
Seite 216
Reference Everything from A to Z
216 Online Edition for Part no. 01 40 2 911 521 - VI/13
Top Related