402/403 XE Sneak Peak
What is the 402/403 XE series? • Value priced actuator for medium payloads
(<150 lbs)
• Targeted for hard disk manufacturing, high tech markets, life sciences, lab automation, and also competes for pneumatic replacements
• Primary Competitors– NSK– THK– Danaher (aka NB)
402/403 XE Basics• Highly integrated linear rail/screw positioner
– Two cross sections (HxW)• 402XE – 23x50mm (no cover) and 36x57mm (cover)
• 403XE – 30x60mm (no cover) and 45x80mm (cover)
– Extruded and machined steel base• 402XE – 75mm to 225mm stroke
• 403XE – 60mm to 655mm stroke
• Steel body allows for cantilever
– Precision rolled ballscrew• 402XE – 5mm or 2mm lead
• 403XE – 5mm or 10mm lead
Rigid Steel U-Channel BodyProvides structural rigidity for minimal deflection.
Flexible Motor Mounting OptionsProvide a variety of motor drive options including servo and stepper motorsPrecision Ball Screw Drive
TrainProvides smooth motion with high accuracy and high mechanical efficiency.
Integrated Precision Screw and Guide BearingProvide a low profile, high accuracy, smooth motion, and robust adjustment free design over the life of the actuator
Packaged Adjustable Limit SensorsProvide adjustable stroke lengths, easily connected, and reduced cables to manage in an aesthetically appealing manner.Optional Hard Cover
Clear anodized Provides protection from contamination falling into the positioner.
402 /403 XE Series • Precision Rolled Ballscrew
– 5mm, 2mm lead options (402XE)
– 5mm, 10mm lead options (403XE)
• 10 um or better repeatability– Accuracy ~ 15 um
402/403 XE Bearing
• Highly Integrated Linear Bearing– Single Carriage– 4 point contact for equal
loading in any direction
402/403 XE • Optional Hard Cover
– Similar to 404XE– Protection from large
contaminants– No IP rating
402/403XE Mounting
• “Down through” style– No Toe Clamps
402/403 XE Motor Options
• Stepper Motor Options– LV/HV17– LV/HV23
• Servo Motor Options– SM23– SM16
• Prepped for these motors or Included
402/403 XE Limits• Home and Limit Sensor Option
– Parker Global Sensor– 24VDC operation– NPN / PNP– NO / NC options– Packaged into limit switch
housing with connector terminal– Same sensor as HD and LP
actuators
Compared to 404XE
404XE403XE 402XE
404XE 403XE 402XE
Width 95mm 60mm 50mm
Height 47.3mm 30mm 23mm
Max Travel 700mm 655mm 220mm
Repeatability 20-30 micron +/-5 micron +/-5 micron
Straightness 20-30 micron 15-25 micron 15 micron
Load Capacity 135/270 lbs 425 lbs 261 lbs
Max Speed 1440 mm/s 810 mm/s 490 mm/sec
Leads 5, 10, 20mm 5, 10mm 2, 5mm
Compared to 401/402XR
402XR403XE 402XE
402XR 403XE 401XR 402XE
Width 57.1mm 60mm 40.9mm 50mm
Height 57.1mm 30mm 49.5mm 23mm
Max Travel 600mm 655mm 300mm 220mm
Repeat (+/-) 12 micron +/-5 micron 5-12 micron +/-5 micron
Straightness 20-30 micron 15-25 micron 20-25micron 15 micron
Load 220 lbs 425 lbs 110 lbs 261 lbs
Max Speed 1440 mm/s 810 mm/s 500 mm/sec 490 mm/sec
Leads 5, 10mm 5, 10mm 2, 5mm 2, 5mm
401XR
• 4 travel options
• 2 Drive styles (2 or 5 mm)
• Connectorized or Hard wired limits
• Flexible motor mounts or include the SM16 or HV23
• Hard cover and Clean Room options
• XY assembly for system solutions
Same as 402 except:• 8 Travel options
• 5 or 10 mm lead screw
• SM232 motor option included
402/403 XE Timeline
• Timeline– Final Engineering Stages Pre-Production – Inventory Ramping up for 3 week leadtimes
• (current leadtimes ~4-5 weeks)
– Market Launch “September 25th 2006”• Posting all files to extranet in September
– Price list, Presentations, Competitive Analysis, Demo Information, etc
– Selling to early adopters now– Already shipped units on 802’s– Demos available Late September (803-0346)
Questions?
Top Related