1
2
Headquarters:
5220 Gaines Street San Diego, CA 92110
Northeast Facility:
622 Grant Road Folcroft, PA 19032
Toll Free:
844-239-4056
SilexSystem.com
3 Accessories
4 Metal Diamonds
Profiling Diamonds
Polishing Diamonds
Edge Grinding Profiling Diamonds
Burnishing Pads
Floor Treatments
VELOX Magnetic System
Joint Clean Out Blades
5
6
7
8
12
18
19
20 How To Order
3
Slurry Bags
Velcro Foam Risers (Hook & Loop)
3-inch Velcro Replacements (Hook) 2,000 ft2 SR03VELCRO
Silex Slurry Bags 35 x 35 x 35 (4) 10” Lift Hooks 3000 lb SWL, 5,1 SF 3,000 ft2 SSB-3
Velcro Replacements for Diamond Magnetic Adapter Plates
Velcro Foam Risers - 3" 20,000 ft2 36-LG3RISER
Velcro Foam Risers - 5" 2,000 ft2 S05RISER
Velcro Foam Risers - 7" 2,000 ft2 S07RISER
ACCESSORIES
• Available in: 3” diameters
• Adhesive backing
3-inch
1/2” thick • Available in: 3”, 5” & 7” diameters
• Thickness: 3-inch = 1/2” thick
• Thickness: 5 & 7-inch = 5/16” thick
• Attaches to Velcro-backed diamond tooling
• Provides improved tool stability
• Protects tooling plates from damage
• Improves overall scratch pattern
• Allows flexibility to polish any non-flat surface or uneven areas
5” & 7-inch
5/16” thick
Silex Slurry Bags are wet slurry filtration bags made from geotextile
woven material allowing water to filter through utilizing a dehydration
process by means of natural gravitation. Silex slurry bag’s fabric
design retains the solid concrete sediments while permitting the free
flow of water to be filtered into clean water allowing contractors the
ability to release on site.
Slurry bags are designed with multiple handles making it easier to
set up for use and for removal and disposal.
4
18 / 20 GRIT
METAL DIAMONDS
Extra Soft (Black) DIA-18/20PLUG-XS
Soft (Red) DIA-18/20PLUG-S
10 SEGMENT METAL DIAMONDS
• 3” Diameter (76mm)
• 2-Pin Hole Magnetic System
• Wet or Dry
• High Concentration of Diamonds
• Faster Cut
• Higher Degree of Refinement
• Consistent Scratch Patterns
30 / 40 GRIT
60 / 80 GRIT
120 / 150 GRIT
Extra Soft (Black) DIA-30/40PLUG-XS
Soft (Red) DIA-30/40PLUG-S
Medium (Green) DIA-30/40PLUG
Hard (Blue) DIA-30/40PLUG-H
Extra Hard (Orange) DIA-30/40PLUG-XH Extra Soft (Black) DIA-60/80PLUG-XS
Soft (Red) DIA-60/80PLUG-S
Medium (Green) DIA-60/80PLUG
Hard (Blue) DIA-60/80PLUG-H
Extra Hard (Orange) DIA-60/80PLUG-XH
Extra Soft (Black) DIA-120/150PLUG-XS
Soft (Red) DIA-120/150PLUG-S
Medium (Green) DIA-120/150PLUG
Hard (Blue) DIA-120/150PLUG-H
Extra Hard (Orange) DIA-120/150PLUG-XH
5
SILEX EXTREME-03-0H 5K - 10K ft2 SHB03W00EH
SILEX -03-1H 5K - 10K ft2 SHB03W001H
SILEX -03-2H 5K - 10K ft2 SHB03W002H
SILEX -03-3H 5K - 10K ft2 SHB03W003H
SILEX -03-4H 5K - 10K ft2 SHB03W004H
SILEX -03-5H 5K - 10K ft2 SHB03W005H
SILEX -03-6H 5K - 10K ft2 SHB03W006H
SILEX -03-7H 5K - 10K ft2 SHB03W007H
BLACK H SERIES Silex 3” Profile Diamonds (Wet)
Silex® BLACK H Series Diamonds are designed utilizing various high-quality proprietary matrix of metal abrasives and resins. The manufacturing bonding process ensures even saturation and distribution of diamond abrasives throughout the bond adding to their longevity, durability and high performance.
Silex® BLACK H Series Diamonds are engineered and designed to provide
excellent flexibility to reach the bottom of low spots in the substrate’s surface
allowing a more consistent scratch pattern and overall refinement. The face design
provides maximum surface area contact resulting in the reduction of labor and the
time needed for the Operator to reach maximum refinement within each Black H
Diamond’s quantitative certified value. The face design is also exceptional for
channeling slurry &/or dust away from the tooling to keep the consistency of a
high-performance tooling.
PROFILING DIAMONDS
• High-Performance Profiling Diamonds
• HIGH Concentration of Diamonds for Faster Refinement
• Excellent Flexibility
• No Resin Transfer
• Consistent Scratch Patterns
• Velcro Color Backing: Black
• Sizes Available: 3”, 5”, & 7
6
SILEX RED Elite -03-L0E 9,000 ft2 SRE03D0L0E 200 Grit
SILEX RED Elite -03-L1E 9,000 ft2 SRE03D0L1E 400 Grit
SILEX RED Elite -03-L2E 9,000 ft2 SRE03D0L2E 800 Grit
SILEX RED Elite-03-L3E 9,000 ft2 SRE03D0L3E 1500 Grit
SILEX RED Elite-03-L4E 9,000 ft2 SRE03D0L4E 3000 Grit
ELITE SERIES Silex 3” Polishing Diamond (Dry)
POLISHING DIAMONDS
• High Quality Resin Polishing Diamonds
• Dry Process Only
• Substantial Life Expectancy
• Produces Exceptional Gloss & DOI Readings
• Velcro Color Backing: Red
SILEX® Elite Series polishing diamonds are strategically designed and manufactured
utilizing a superior diamond matrix encapsulated within high-quality resin binders that
provides longer diamond life without glazing, swirl free surfaces, and remains flexible for
high performance contouring.
The high-concentration of diamonds along with the premium resin binders, you will attain an even and consistent, ultra-refined floor that has been polished to its ’maximum poten-tial’ resulting in a high reflecting gloss and distinction of image (DOI) measurements; TRUE mechanical shine and polish.
7
Silex 5” H Series Hand Grinding Profiling Diamonds (Wet)
SILEX EXTREME 05-0H 1,000 ft2 SHB05W00EH
SILEX 05-1H 1,000 ft2 SHB05W001H
SILEX 05-2H 1,000 ft2 SHB05W002H
SILEX 05-3H 1,000 ft2 SHB05W003H
SILEX 05-4H 1,000 ft2 SHB05W004H
SILEX 05-5H 1,000 ft2 SHB05W005H
Silex 7” H Series Hand Grinding Profiling Diamonds (Wet)
EDGE POLISHING - Profiling Diamonds
BLACK H SERIES 5” & 7”
SILEX EXTRME 07-0H 1,000 ft2 SHB07W00EH
SILEX 07-1H 1,000 ft2 SHB07W001H
SILEX 07-2H 1,000 ft2 SHB07W002H
SILEX 07-3H 1,000 ft2 SHB07W003H
SILEX 07-4H 1,000 ft2 SHB07W004H
SILEX 07-5H 1,000 ft2 SHB07W005H
• High-Performance Profiling Diamonds
• HIGHER Concentration of Diamonds for Faster Refinement
• Excellent Flexibility
• No Resin Transfer
• Consistent Scratch Patterns
• Velcro Color Backing: Black
8
COLOR CODING 200 Grit = Yellow 400 Grit = Silver 800 Grit = Green 1500 Grit = Red 3000 Grit = Black SPECTRUM BURNISHING PAD 03-200 20,000 ft
2 SBPHD03-200
SPECTRUM BURNISHING PAD 03-800 20,000 ft2 SBPHD03-800
SPECTRUM BURNISHING PAD 03-3000 20,000 ft2 SBPHD03-3000
3” Burnishing Pads
5” Burnishing Pads
SPECTRUM BURNISHING PAD 05-200 20,000 ft2 SBPHD05-200
SPECTRUM BURNISHING PAD 05-400 20,000 ft2 SBPHD05-400
SPECTRUM BURNISHING PAD 05-800 20,000 ft2 SBPHD05-800
SPECTRUM BURNISHING PAD 05-1500 20,000 ft2 SBPHD05-1500
SPECTRUM BURNISHING PAD 05-3000 20,000 ft2 SBPHD05-3000
Spectrum Burnishing Pads
SILEX® SPECTRUM PADS are excellent pads designed
for durability and longevity for a wide variety of applications;
burnishing, polishing, and maintenance.
SILEX® SPECTRUM PADS are diamond impregnated
throughout the entire pad creating a stronger, wear and tear
resistant pad at an economical price. The diamond
powders inside the pads provide extended life due to the
ability to use either side creating a stronger, more durable
tool for most flooring situations.
9
9” Burnishing Pads
SPECTRUM BURNISHING PAD 09-200 20,000 ft2 SBPHD09-200
SPECTRUM BURNISHING PAD 09-400 20,000 ft2 SBPHD09-400
SPECTRUM BURNISHING PAD 09-800 20,000 ft2 SBPHD09-800
SPECTRUM BURNISHING PAD 09-1500 20,000 ft2 SBPHD09-1500
SPECTRUM BURNISHING PAD 09-3000 20,000 ft2 SBPHD09-3000
11” Burnishing Pads
SPECTRUM BURNISHING PAD 11-200 20,000 ft2 SBPHD11-200
SPECTRUM BURNISHING PAD 11-400 20,000 ft2 SBPHD11-400
SPECTRUM BURNISHING PAD 11-800 20,000 ft2 SBPHD11-800
SPECTRUM BURNISHING PAD 11-1500 20,000 ft2 SBPHD11-1500
SPECTRUM BURNISHING PAD 11-3000 20,000 ft2 SBPHD11-3000
COLOR CODING 200 Grit = Yellow 400 Grit = Silver 800 Grit = Green 1500 Grit = Red 3000 Grit = Black
7” Burnishing Pads
SPECTRUM BURNISHING PAD 07-200 20,000 ft2 SBPHD07-200
SPECTRUM BURNISHING PAD 07-400 20,000 ft2 SBPHD07-400
SPECTRUM BURNISHING PAD 07-800 20,000 ft2 SBPHD07-800
SPECTRUM BURNISHING PAD 07-1500 20,000 ft2 SBPHD07-1500
SPECTRUM BURNISHING PAD 07-3000 20,000 ft2 SBPHD07-3000
Spectrum Burnishing Pads
10
17” Burnishing Pads
SPECTRUM BURNISHING PAD 17-200 20,000 ft2 SBPHD17-200
SPECTRUM BURNISHING PAD 17-400 20,000 ft2 SBPHD17-400
SPECTRUM BURNISHING PAD 17-800 20,000 ft2 SBPHD17-800
SPECTRUM BURNISHING PAD 17-1500 20,000 ft2 SBPHD17-1500
SPECTRUM BURNISHING PAD 17-3000 20,000 ft2 SBPHD17-3000
20” Burnishing Pads
SPECTRUM BURNISHING PAD 20-200 20,000 ft2 SBPHD20-200
SPECTRUM BURNISHING PAD 20-400 20,000 ft2 SBPHD20-400
SPECTRUM BURNISHING PAD 20-800 20,000 ft2 SBPHD20-800
SPECTRUM BURNISHING PAD 20-1500 20,000 ft2 SBPHD20-1500
SPECTRUM BURNISHING PAD 20-3000 20,000 ft2 SBPHD20-3000
COLOR CODING 200 Grit = Yellow 400 Grit = Silver 800 Grit = Green 1500 Grit = Red 3000 Grit = Black SPECTRUM BURNISHING PAD 14-200 20,000 ft
2 SBPHD14-200
SPECTRUM BURNISHING PAD 14-400 20,000 ft2 SBPHD14-400
SPECTRUM BURNISHING PAD 14-800 20,000 ft2 SBPHD14-800
SPECTRUM BURNISHING PAD 14-1500 20,000 ft2 SBPHD14-1500
SPECTRUM BURNISHING PAD 14-3000 20,000 ft2 SBPHD14-3000
14” Burnishing Pads
Spectrum Burnishing Pads
11
27” Burnishing Pads
SPECTRUM BURNISHING PAD 27-200 20,000 ft2 SBPHD27-200
SPECTRUM BURNISHING PAD 27-400 20,000 ft2 SBPHD27-400
SPECTRUM BURNISHING PAD 27-800 20,000 ft2 SBPHD27-800
SPECTRUM BURNISHING PAD 27-1500 20,000 ft2 SBPHD27-1500
SPECTRUM BURNISHING PAD 27-3000 20,000 ft2 SBPHD27-3000
COLOR CODING 200 Grit = Yellow 400 Grit = Silver 800 Grit = Green 1500 Grit = Red 3000 Grit = Black
25” Burnishing Pads
SPECTRUM BURNISHING PAD 25-200 20,000 ft2 SBPHD25-200
SPECTRUM BURNISHING PAD 25-400 20,000 ft2 SBPHD25-400
SPECTRUM BURNISHING PAD 25-800 20,000 ft2 SBPHD25-800
SPECTRUM BURNISHING PAD 25-1500 20,000 ft2 SBPHD25-1500
SPECTRUM BURNISHING PAD 25-3000 20,000 ft2 SBPHD25-3000
Spectrum Burnishing Pads
• Ideal for Burnishing, Cleaning, Refurbishing, Buffing & Maintaining Concrete and Terrazzo
• High Diamond Content
• Diamond Impregnated
• Usage: Wet or Dry
• 3” to 27” Sizes Available
12
CLEAN CR 4 oz. Packets COMING SOON
CLEAN CR 5 gal DIA109-5
CLEAN CR 55 gal DIA109-55
CLEAN CR 275 gal DIA109-275
Silex® CLEAN CR Concrete Cleaner & Restorer is a robust easy to use, free rinsing and residue free cleaner designed specifically to clean, maintain, and restore polished concrete surfaces. Silex® CLEAN CR has been formulated with unique ‘reactive’ ingredients when activated with water, quickly dislodges dirt and grime from the substrate holding them in suspension.
Silex® CLEAN CR Concrete Cleaner & Restorer contains a measured amount of densifier that when properly maintained with regular use, will further refine the floors, increase abrasion resistance and will help 'restore' a shine back from dulled surfaces that may have not been maintained properly.
Silex® CLEAN CR Concrete Cleaner & Restorer can also be used on resinous flooring, non-densified concrete, terrazzo, tile, vinyl, and other hard surfaces.
Dilution: 4 oz,/ 15 gal. Auto Scrubber Water Tank
pH: 11.2 [+/- 0.5] (Concentrate)
8.5 (Diluted for Use)
CONCRETE CLEANER
• Active Suspension Technology
• No Rinse, No Residue
• Quickly Removes Dirt
• Improves Durability
• Maintains Non-Slip Properties
• Increases Life Expectancy
• Further Hardens, Refines & Restores Concrete
• Helps Resist Scuffing, Scratching & Black Marks
**Due to the wide varie-ty of substrate varia-tions in concrete’s qual-ity the porosity, job site conditions, temperature and relative humidity will affect coverage
TECHNICAL DATA SHEETS AVAILABLE
AT
.SILEXSYSTEM.COM
CLEAN CR CLEANER &RESTORER REACTIVE COLLOIDAL SILICA TECHNOLOGY
13
GLIDE - DC 5 gal SDGDC-05
GLIDE - DC 55 gal SDGDC-55
GLIDE - DC 275 gal SDGDC-275
GLIDE DC - DUAL COMPOUNDS
Silex® GLIDE-DC (DUAL COMPOUNDS) is a neutral pH formula designed utilizing reactive colloidal silica technologies with hydrophilic properties which allows deeper penetration into the substrate due to its nano-sized particles. GLIDES’s fast-reacting components immediately begins chemically reacting with the concrete's matrix forming new CSH compounds in the micro-pores and micro-capillaries.
Silex® GLIDE-DC formulation has also been engineered with nano-abrasion technologies which act like an abrasive that enhances the diamond’s cutting capabilities providing faster, more efficient concrete removal. During the first cut, GLIDE-DC forms a reactive slurry that is pushed back into the substrate's micro-voids by the grinder’s head pressure where it continues to chemically react and bond with itself.
Application Rate: 400 - 600 ft2 /gal**
Applications Required: 1
Refining & Cutting Compound
• Harder, Denser Surface
• Increased Efficiencies & Productivity
• Faster Refinement
• Lower Ra Values
• Reduce Surface Profile
• Excellent for Surface Crazing
• Increased D.O.I. (Distinction of Image)
**Due to the wide variety of substrate variations in con-crete’s quality the porosity, job site conditions, temperature and relative humidity will affect coverage rates and drying times.
TECHNICAL DATA SHEETS AVAILABLE
AT
.SILEXSYSTEM.COM
This is the most important and 1st
step in the Silex® Silica Stacking®
Refinement Process which begins
creating a harder, denser floor resulting
in a longer life span and performance.
REACTIVE COLLOIDAL SILICA TECHNOLOGY
14
HARD 5 gal SAHF20005
HARD 55 gal SAHF200055
HARD 275 gal SAHF200275
HARD
Silex® HARD is a neutral pH formula utilizing proprietary chemically reactive hydrophilic technologies that allow the solution to penetrate deeply and enable self-sealing properties. As Silex® Hard is applied it immediately begins chemically reacting within the concrete’s matrix forming insoluble cementitious compounds that effectively self-seal micro pores and hairline cracks. These fast-reacting hydrophilic properties close off pathways for moisture from any direction, therefore allowing the concrete itself to become the water barrier; a hydrophobic surface.
Silex® HARD densifier chemically produces a significantly harder, denser floor,
substantially increases the abrasion resistance and provides a durable dust-proofed
concrete surface which helps to reduce maintenance costs.
Application Rate: 400 - 600 ft2 /gal**
Applications Required: 1
DENSIFIERS
REACTIVE COLLOIDAL SILICA TECHNOLOGY
• Higher Levels of Abrasion Resistance
• Significantly Increases Surface Hardness & Density
• Excellent Water Repellent
• Higher Gloss Readings
• Prevents ASR
• Enhances & Protects Integral Color & Dyed Decorative Surfaces
• Blocks Efflorescence
TECHNICAL DATA SHEETS AVAILABLE
AT
.SILEXSYSTEM.COM
**Due to the wide variety of substrate variations in con-crete’s quality the porosity, job site conditions, tempera-
15
HYDRO-HARD 5 gal SAHH200005
HYDRO-HARD 55 gal SAHH200055
HYDRO-HARD 275 gal SAHH200275
HYDRO-HARD
Application Rate: 400 - 600 ft2 /gal **
Applications Required: 1
**Due to the wide variety of substrate variations in con-crete’s quality the porosity, job site conditions, tempera-
Silex® HYDRO-HARD densifier is a proprietary formulation specifically designed using a hybrid technology that provides active protection properties that provides a depth of penetration up to 8mm deep into the slab while also producing a silica film wear layer on the surface of the concrete. Silex® Hydro-Hard chemically reacts with the silicate matrix within the capillaries and pores, forming bonds that provide excellent hydrophobicity while allowing it to remain breathable.
Silex® Hydro-Hard is a single spray-on-leave-on application, no rinse formula that enhances the durability and provides optimally protection against the absorption of water, moisture, and other aggressive substances along with forming a chloride intrusion barrier.
→ Consider using if the
final polishing process is a densified floor.
REACTIVE COLLOIDAL SILICA TECHNOLOGY
DENSIFIERS
• Optimum Water Repellency
• Superior Hardness
• Permanently Dust Proofs Concrete
• Increases Life Expectancy
• Reduces Alkalinity Efflorescence
• Enhances & Protects Stained, Integral Color & Dyed Decorative Surfaces
TECHNICAL DATA SHEETS AVAILABLE
AT
.SILEXSYSTEM.COM
16
SEAL 5 gal SASCDH600 RTU5GAL
SEAL 55 gal SASCDH600 RTU55GAL
SEAL 275 gal SASCDH600 RTU275GAL
SEAL
Estimated Coverage: 1st Coat: 1,500 - 2,500 ft2 /gal
2nd Coat: 2,500 - 3,500 ft2 /gal
Applications Required: 2
SEALER & STAIN GUARD
Silex® SEAL is a proprietary formula designed to penetrate deeply into the concrete’s surface. When Silex® Seal is applied to concrete it chemically reacts forming covalent bonds within the concrete substrate that provides excellent hydrophobicity while allowing treated concrete to remain breathable; inhibits the movement of liquid water but permits water vapor to move through the concrete matrix.
Silex® Seal’s formulation provides a long
lasting, high level of protection from
contaminants such as dirt, oil, grease,
chemicals, salt and water from penetrating
the surface while also providing a gloss
satin finish, superior hardening properties,
slip resistance and increased long-term
performance to newly finished or aged
concrete surfaces. Excellent for floors that
have higher moisture vapor emissions
rate.
• Hydrophobic Protection Locks out Water, Oils & Salt Intrusion
• Excellent for Higher Moisture Vapor Emissions
• Higher Levels of Abrasion Resistance
• Superior Surface Hardness & Density
**Due to the wide variety of substrate variations in concrete’s quality the porosity, job site conditions, temperature and relative humidity will affect coverage rates and drying times.
TECHNICAL DATA SHEETS AVAILABLE
AT
.SILEXSYSTEM.COM
REACTIVE COLLOIDAL SILICA TECHNOLOGY
• Increases Performance & Service Life
• Reduces Surface Permeability
• Dust Proof, Non-Marking
• Reduces Alkalinity Efflorescence
• UV Resistant: Will not Chip, Peel or Flake with Age or Exposure
• Resists Whitening & Blushing
• Fast Drying & Quick Curing
• Easy to Clean for Reduced Maintenance Cost
17
GLASS 5 gal SAGP005
GLASS 55 gal SAGD055
GLASS 275 gal SAGT275
GLASS
Silex® Glass - Micro-Crack & Pinhole Filler is a proprietary formula designed for filling pinholes,
micro-cracks and small voids within the substrate during the concrete grinding and polishing process.
This unique formulation combines our silicate technology that chemically reacts with the dust, creating a slurry that automatically fills imperfections while at the same time producing a harder more densely refined surface, increases surface tension and contributes to increased gloss levels.
Application Rate: 200 - 600 ft2 /gal **
Applications Required: 1
MICRO-CRACK & PINHOLE FILLER
Micro-Crack & Pinhole Filler
**Due to the wide variety of substrate variations in concrete’s quality the porosity, job site conditions, temperature and relative humidity will affect coverage rates and drying times.
• Fills Imperfections During Grinding Operations
• Creates a Polished Surface that is Easier to Maintain
• Accepts Color-Stains and Hardeners More Uniformly
• Easy to Use, Low Odor, No Rinsing Required
• Penetrates - No Film to Lift or Peel Off
• Reduction in Labor Costs, Chemical Costs & Tooling Wear
TECHNICAL DATA SHEETS AVAILABLE
AT
.SILEXSYSTEM.COM
18
*(6 Adapters + 6 Base Plates / Head Needed)
MAGNETIC SYSTEM - VELOX
14" SPP Head Plate* SPPB14PDM
3” PM Diamond Holder w/Lip & Velcro Hook - 2-Pin Hole System SPPBPML0301
3” PM Diamond Holder Adapter Base Plate - 2-Pin Hole System SPPMM2P
PM Diamond Adapter Base Plate for 3-Hole System SPPMMG
3” Resin Diamond Holder w/Lip
+ Velcro Hook Backing
3” Magnetic Diamond Holder Adapter
2-Pin Base Plate
Magnetic Diamond Adapter Base Plate
3-Hole System
Magnetic Plates - Adapters & Base Plates
19
7” & 10” Diameter
7” 3/16” Width CG-7BRZ-187
7” 1/4” Width CG-7BRZ-250
10” 3/16” Width CG-10BRZ-187
Joint Clean Out Blade TM
Diamatic® has designed ULTRACUT™; a joint clean-out blade embedded with a diamond matrix on all sides of the cutting blade that will achieve optimum clean-out & cutting blade performance.
Conventional concrete saw blades made for cutting concrete have diamond seg-ments adhered only on two sides of the blades and are not made for cleaning the sidewalls of the joints efficiently, when in fact they can miss up to 40% of the side walls while packing the pores with dust and debris.
ULTRACUT'S™ engineered design creates a vortex that efficiently pulls debris from the pores and removes hard joint sealant material from each side of the joint’s side wall producing a clean, sound abraded surface for the joint filler to ad-here to.
Never underestimate proper joint preparation; poor surface prep can lead to
quicker failure from disbondment.
• 7/8” Arbor (w/o bushing)
• Designed to abrade the sidewalls of control joints
• Provides optimum clean-out; prepping joints for fill.
• Engineered to pull debris from the pores & remove hard joint sealant material.
• Higher Concentration of Diamonds
• Bi-Directional Blade
• Significantly Longer Blade Life Patent Pending
20
Place your Orders Online
Www.SilexSystem.com
Questions or Concerns, Please Contact Us at:
Northeast Facility:
622 Grant Road Folcroft, PA 19032
Headquarters:
5220 Gaines Street San Diego, CA 92110
Toll Free:
844-239-4056 [email protected]
20
Top Related