8/9/2019 38 Fevimate TG
1/1
Disclaimer:
The product information & application details given by the company & its agents has been
provided in good faith & meant to serve only as a general guideline during usage. Users are
advised to carry out tests & take trials to ensure on the suitability of products meeting theirrequirement prior to full scale usage of our products. Since the correct identification of the
problems, quality of other materials used and on-site workmanship are factors beyond our
control, there are no expressed or implied guarantee / warranty as to the results obtained. The
Company does not assume any liability or any consequential damage for unsatisfactory results,
arising from the use of our products.
Pidilite Industries LimitedConstruction Chemicals DivisionRamkrishna Mandir Road Post Box No. 17411Andheri (E) Mumbai 400059 INDIATel +91-22-2835 7000 Fax +91-22-2835 7008website www.doctor-fixit.com E-mail [email protected]
TIL
E
FIXING
RANGE
TIL
E
FIXING
RANGE
TIL
E
FIXING
RANGE
TIL
E
FIXING
RANGE
TIL
E
FIXING
RANGE
FEVIM
ATE
TG
FEVIM
ATE
TG
FEVIM
ATE
TG
FEVIM
ATE
TG
FEVIM
ATE
TG
DR. FIXIT FEVIMATE TG
Waterproof Joint Filler for Tiles
Dr. Fixit Fevimate TGtile grout is cement based, enhanced by adding siliceous fillers, UV stable pigments and additives.It has excellent adhesion to all types of tiles and is impermeable to running water. Dr. Fixit Fevimate TGcan be used for jointfilling of ceramic tiles, mosaics, marble, resin bonded marble, natural stones, terrazzo tiles and swimming pool tiling.
AREAS OF APPLICATION:
All indoor & outdoor tiling joints
FEATURES & BENEFITS:
Ready to use - only addition of water at site
Excellent adhesion with all types of tiles
Forms impermeable joints
Non shrinking
UV stable hence suitable for outdoor application
METHOD OF APPLICATION:
The tiling joint should be made clean, dry and free from all contamination.
Mix the powder in 1 : 2.5 ratio (1 water : 2.5 Dr. Fixit Fevimate TG) to get homogeneous mix and desired consistency.Do not add water into the powder
Addition of water shall be adjusted as per the climatic conditions
Fill the prepared paste into the tiling gaps and remove excess material by tooling.
Leave the surface for 24 hours
PRECAUTIONS & LIMITATIONS:
Ensure minimum gap of 2 mm in tiles for best results
Moisten the tile joints is highly recommended; when application is to be carried out in hot climatic conditions (above40oC)
Strictly not recommended for the tile joints more than 3 mm
TECHNICAL INFORMATION:
Mix proportion - 1 : 2.3 = water - Dr. Fixit Fevimate TG
Refer Table for the consumption of Dr. Fixit Fevimate TGfor various sizes of tiles
PACKING: 500 g & 1 kg.
CC-DF-TG-FLR-ENG-04/05
DR. FIXIT FEVIMATE TG COVERAGE CHART
FOR 2 mm JOINT WIDTH CONSUMPTION (kg / per sq.mt.)
0.400.30
0.300.350.300.300.25
0.250.22
SIZE OF THE TILE (inch x inch)
4 x 48 x 68 x 8
12 x 812 x 1213 x 1116 x 1618 x 18
24 x 24
TILE THICKNESS (mm)
5.55.5
7.010101012
1215
Top Related