2L
914 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business
2L
The EVLL LED FamilyHazard•Gard® EVLL Series LED Luminairesare designed to provide full-spectrum,crisp, white light. Five versions of the EVLLLED are available, providing ideal solutionsfor a wide range of applications.
Model
Equivalent HID
Luminaire
Typical
Energy
Savings
EVLL5L 100W-150W MH
Up to 62%
EVLL7L 150W-175W HPS/MHEVLL9L 175W-250W MHEVLL11L 250W-400W HPS/MHEVLL13L 400W HPS/MH PS
Applications:• Five lumen outputs for replacement of
existing HID luminaires• Locations requiring continuous and
consistent light levels in extreme ambienttemperatures
• Areas requiring frequent on-and-off oflights
• Where flammable vapors, gases,ignitable dusts, fibers or flyings arepresent; indoors or outdoors
• Where extremely corrosive, wet, dusty,hot and/or cold conditions exist
• NEMA 4X, marine, wet locations, andhose-down environments
• Manufacturing plants; heavy industrial,chemical, petrochemical orpharmaceutical facilities; platforms;loading docks; tunnels; outdoor wall andstanchion mounted general area lighting
EVLL LED Benefits:Industry best for ease ofinstallation• Quick-connect design – install and wire the
mounting module, then simply screw in theluminaire
• Factory-sealed – no external sealing fittingsrequired in Groups B, C, and D
• Adapter available for connection to existingHazard•Gard® EVI, EVLP, and EVM modules
Reduce operation andmaintenance costs• Energy-efficient – up to 62% reduction in
energy used versus equivalent HID fixtures• 60,000 hours rated life – eliminates need for
frequent lamp replacement
Reliable performance in anyenvironment• Shock- and vibration-resistant solid-state
luminaires have no filaments or glasscomponents that could break – greatlyreduces the risk of premature failure
• T5 temperature rating• Operating ambient -25°C to 65°C
Certifications andCompliances:NEC and CEC
• Class I, Division 1, Groups B, C, D• Class I, Zone 1, Groups IIB + H2, IIB, IIA• Class II, Groups E, F, G• Class III, Simultaneous PresenceUL Standards
• UL844 Electric Fixture Hangers forHazardous Locations
• UL1598 Luminaires• UL1598A Luminaire for Installation on
Marine VesselsCSA Standard
• CSA C22.2 No. 137Environmental Ratings
• NEMA 4X• IP66• Marine and Wet LocationsIEC and ATEX Certifications and Protection
(Pending)
• Ex II 2G Ex d IIC (Zone 1, 2) (Pending)• Ex II 2D Ex tD A21 IP66 (Zone 21, 22)
(Pending)
LED System:• High brightness light emitting diode
(LED) arrays• Color temperature: 3000K (CRI 82) and
5600K (CRI 65) options available• Advanced heat sink design ensures LED
does not exceed manufacturer’stemperature ratings across all specifiedambient conditions
• LM-79 and LM-80 reports available
Standard Materials:• Body and mounting modules – copper-
free aluminum with Corro-free™ epoxypowder coat
• Lens – shatter-resistant, explosionproofglass
• Gaskets – silicone• Guard – stainless steel• External hardware – stainless steel• Factory-sealed*
*Refer to Installation and Maintenance Sheet for externalseal requirements.
Electrical Ratings:Model Voltage Input Amps (Max.) Power Factor Input Power Lumen Output
EVLL5L 100-277VAC, 50 / 60 Hz108-250VDC
0.46-0.820.38-0.89
0.99%1 80W 5625
EVLL7L 100-277VAC, 50 / 60 Hz108-250VDC
0.51-1.110.42-1.15
0.99%1 100W 6750
EVLL9L 100-277VAC, 50 / 60 Hz108-250VDC
0.61-1.190.56-1.30
0.99%1 130W 9000
EVLL11L 100-277VAC, 50 / 60 Hz108-250VDC
0.76-1.560.73-1.71
0.99%1 151W 10500
EVLL13L 100-277VAC, 50 / 60 Hz108-250VDC
0.78-1.580.75-1.73
0.99%1 175W 13500
Hazard•Gard® EVLL SeriesExplosionproof LED Luminaires
Cl. I, Div. 1, Groups B, C, DCl. I, Zone 1, Groups IIB +H2, IIB, IIACl. II, Groups E, F, GCl. III
UL Listed & CSA CertifiedIEC / ATEX (Pending)Simultaneous PresenceMarine & Wet LocationsNEMA 4X, IP66
Class I, Division 1 factory-sealed LEDluminaire for general illumination
2L
915www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business
2L
Installation and replacement made simple
Modular design - This contractor-friendly design isideal for both new construction applications and retrofit.These luminaires use the same mounting modules asexisting Hazard•Gard® Series luminaires. The quick-connect design facilitates installation - install and wire themounting module, then screw in your luminaire. Two start Acme threadsease and reduce installation time.
NEMA 4X rated
LED housing assembly - The LED housing is constructed ofdurable die cast aluminum, providing an efficient thermal path tothe heat sink assembly. The impact-resistant lens is sealed from theoutside environment and provides ingress protection against waterand dust. Multi-die LED arrays are used to provide energy-efficient,long-life white light.
Safe, reliable heat transfer
Heat sink - Enhanced heat sink designprovides safe and effective heat transferfrom the LED assembly to the outsideenvironment, ensuring low LED junctiontemperature, reliability and sustainedlumen performance.
High efficiency and lumen output
Driver module assembly - High efficiency LED drivers are designed toprovide reliable operation in even the harshest environments. Various ACand DC input voltage options are available to suit virtually any driverequirement.
Optional color temperatures
Warm (available on 5L through 11L models
available.only) and cool white color temperatures
Hazard•Gard® EVLL SeriesExplosionproof LED Luminaires
Cl. I, Div. 1, Groups B, C, DCl. I, Zone 1, Groups IIB +H2, IIB, IIACl. II, Groups E, F, GCl. III
UL Listed & CSA CertifiedIEC / ATEX (Pending)Simultaneous PresenceMarine & Wet LocationsNEMA 4X, IP66
Class I, Division 1 factory-sealed LEDluminaire for general illumination
2L
916 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business
2L
Catalog Numbering System:
SERIES
EVLL Explosionproof Vaportight Low Profile LED Luminaire
LAMP OUTPUT
5L 5,625 Lumen Output7L 6,750 Lumen Output9L 9,000 Lumen Output11L 10,500 Lumen Output13L 13,500 Lumen Output
LED COLOR
C Cool (5600K nominal)W Warm (3000K nominal)
MOUNTING MODULE
A Pendant EVSP J Stanchion EVSJBX Wall Bracket EVSW M Mounting Module Adapter EVSA (See Note #1)CX Ceiling Mount EVSC Blank No Mounting Module Supplied
HUB SIZE
2 3⁄4” NPT (Pendant, Ceiling, and Wall Only)3 1” NPT (Pendant, Ceiling, and Wall Only)5 1 1⁄2” NPT (Stanchion Only)25 25 mm (Pendant, Ceiling, and Wall Only)32 32 mm (Pendant, Ceiling, and Wall Only)Blank Leave Blank for Mounting Module Adapter and No Mounting Module
GUARD
0 No Guard1 Stainless Steel
VOLTAGE (See Note #2)
/UNV1 120VAC to 277VAC 50/60 Hz, 108VDC to 250VDC
SUFFIXES
S812 Trunnion Mount
SERIESLAMP
OUTPUTLED
COLORMOUNTINGMODULE
HUB SIZE GUARD VOLTAGE SUFFIXES
EVLL 5L C A 2 0 /UNV1
Notes:
1. EVSA Adapter for use with existing Eaton’sCrouse-Hinds EVI, EVLP, and EVM mountingmodules.
2. Accessory kit EVLL347/480 K1 (step downtransformer in separate enclosure) isavailable for 347V and 480V 60 Hzapplications.
(available on 5L through 11L models only)
Hazard•Gard® EVLL SeriesExplosionproof LED Luminaires
Cl. I, Div. 1, Groups B, C, DCl. I, Zone 1, Groups IIB +H2, IIB, IIACl. II, Groups E, F, GCl. III
UL Listed & CSA CertifiedIEC / ATEX (Pending)Simultaneous PresenceMarine & Wet LocationsNEMA 4X, IP66
Class I, Division 1 factory-sealed LEDluminaire for general illumination
2L
917www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business
2L
Dimensions (In Inches):
Pendant Mount Ceiling Mount Stanchion Mount Wall Mount
[104]4.09
[91.3]3.59
[366.2]14.42
[391.6]15.42
[414.4]Ø 16.32
[404.8]Ø 16
[80.2]3.16
[414.4]Ø 16.32
[342.4]13.48
[367.8]14.48
[334.5]13.17
[459.5]18.09
[407.7]16.05
[341.9]13.46
25°
[454.6]17.90
[241.5]9.51
[378.4]14.90
[353]13.90
[345.2]13.59
[407.6]Ø 16.05
Weights:Model Lbs.
EVLL5L 51.76EVLL7L 51.81EVLL9L 52.38EVLL11L 53.00EVLL13L 53.00Add Mounting Modules:Pendant 2.00Ceiling 3.50Stanchion 3.00Wall 5.50Adapter 2.00
Ambient Temperature:
Model
Max. Ambient
Temp. ºC Cl. I, Div. 1
Cl. II, Div. 1 & 2 /
Simu. Presence Cl. I, Zone 1
EVLL5L40 T6 T5 Pending55 T6 T5 Pending65 T5 T5 Pending
EVLL7L40 T6 T5 Pending55 T6 T5 Pending65 T5 T5 Pending
EVLL9L40 T6 T5 Pending55 T6 T5 Pending65 T5 T5 Pending
EVLL11L40 T6 T5 Pending55 T6 T5 Pending
EVLL13L 40 T6 T5 Pending55 T6 T5 Pending
Family Tree:
EVJ2EV22EV33
EVMP2EVMP3EV22
EV33
EV87 EVMJ4
EVSP2EVSP3EVSP25EVSP32
EVSC2 EVSC25EVSC3 EVSC32
EVSA
EVSW2EVSW3
EVSW25EVSW32
EVSJ5
Hazard•Gard® EVLL SeriesExplosionproof LED Luminaires
Cl. I, Div. 1, Groups B, C, DCl. I, Zone 1, Groups IIB +H2, IIB, IIACl. II, Groups E, F, GCl. III
UL Listed & CSA CertifiedIEC / ATEX (Pending)Simultaneous PresenceMarine & Wet LocationsNEMA 4X, IP66
Class I, Division 1 factory-sealed LEDluminaire for general illumination
2L
918 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business
2L
Photometric Data:
ZONE (DEGREES) LUMENS % OF LUMINAIRE
0-30 4221 31.7%
0-40 6923 52.1%
0-60 11630 87.5%
0-90 13500 100.0%
90-180 0 0%
0-180 13500 100.0%
Mtg.
Hgt. A B C D E F
12’ 34.72 13.89 6.94 3.47 1.39 0.69
16’ 19.53 7.81 3.91 1.95 0.78 0.39
20’ 12.50 5.00 2.50 1.25 0.50 0.25
25’ 8.00 3.20 1.60 0.80 0.32 0.16
ISOFOOTCANDLE CHART Footcandle Values for Isofootcandle Lines
DISTANCE TO MOUNTING HEIGHTIsofootcandle chart shows illuminance in
footcandles at ground level(EVLL13LCA20/UNV1)
Luminaire
Series
System
Watts Lumens
EVLL5L 80W 5625EVLL7L 100W 6750EVLL9L 130W 9000EVLL11L 151W 10500EVLL13L 175W 13500
LUMEN OUTPUT FOR OTHER EVLL LED LUMINAIRES
POLAR PLOT CANDELA(EVLL13LCA20/UNV1)
A B C D E F
3
2
1
0
-1
-2
-3
-3 -2 -1 1 2 30
Hazard•Gard® EVLL SeriesExplosionproof LED Luminaires
Cl. I, Div. 1, Groups B, C, DCl. I, Zone 1, Groups IIB +H2, IIB, IIACl. II, Groups E, F, GCl. III
UL Listed & CSA CertifiedIEC / ATEX (Pending)Simultaneous PresenceMarine & Wet LocationsNEMA 4X, IP66
Class I, Division 1 factory-sealed LEDluminaire for general illumination
Top Related