Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 2
Douglas Stamping CompanyFamily owned and operated since 1947
Two Million Pieces, Ready to GoOur in-stock inventory includes more than 3000 different types of shims, spacers,washers, L-blocks, stop blocks and other standard details.
Shim and Spacer ExpertsFor 65 years, our customers have trusted us to quickly and cost effectively producespecialty precision shims and spacers to meet a variety of requirements. Our vastexperience and ever-expanding capabilities get the job done on time and in spec.
Custom and Specialty Shims, Spacers, Washers and DetailsWe will make any shim ring, ring spacer, washer or other flat detail, in any quantity andsize, from any material.
Production Stamping and Laser CuttingOur presses range from 19 to 80 tons, with automatic feed and roll straightening.In-house fiber optic laser cutting is available for shorter runs and custom items.
Marking and IdentificationWe laser engrave and stamp mark a variety of materials, from single piece toproduction runs. We can apply part numbers, logos and scale graduations.
Shim StockOur standard 1008-1010 full hard #1 temper #2 finish shim stock is available in metricand standard thickness, in standard widths up to 8 inches. We also carry a variety ofraw shim stock, sold by the foot, to accommodate your specific width and thicknessrequirements.
Special Materials and FinishesAlthough most of our stampings are made from shim stock, we are experienced with awide variety of ferrous, non-ferrous, laminated and composite materials. Our fiber opticlaser can cut just about any metal, including copper, brass and titanium.
NAAMS Standard ComponentsMost of the standard details defined by the NAAMS Assembly and Stamping standardsare available through us with very short lead times. See pages 58-60 for examples ofthese items.
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 3
Design Considerations.............................................................................
Shims......................................................................................................
Spacers...................................................................................................
Retainer Plates........................................................................................
Keepers...................................................................................................
Insulating Bushings.................................................................................
Feeler Gages...........................................................................................
Weld ("D") Washers.................................................................................
Round Washers.......................................................................................
Insulating Washers..................................................................................
NAAMS Components...............................................................................
Index........................................................................................................
Table of Contents
4
5
37
58
59
60
60
61
62
63
63
66
Ordering Products or Requesting a QuoteWe accept orders by phone, fax, post or e-mail.
If you need something that is not in our catalog or the standards we supply, we arehappy to quote to your needs. Send us your specifications or stop in to discuss yourrequirements.
Special Note Regarding Shims:We take all possible precautions to avoid shipping of damaged product. The bulknature of manufacturing and shipping shims results in an occasional bent or mis-hitshim getting past us. We will happily and immediately replace any unusable product.
Design ConsiderationsSpecials and Custom ItemsThe shims, spacers and washers in this catalog represent a great deal of Douglas Stamping's product line, but not all of it.We will make any shim, spacer or washer, in any size, shape and quantity you require. We make shims in a wide variety ofmaterials, including plastic, brass, copper, stainless steel and laminated stock, using stamping, laser cutting and traditionalmachining.
Slots, Holes and KeyholesOur shims are available with slots, "keyholes," and holes. Slotted shims are generally used in applications where completedisassembly during adjustment is not practical or desirable. Keyhole shims are designed to pass over a threaded fastenerbelow the major diameter without falling out once the shim is lying flat. Most spacers are made with holes.
Shim Set Stackup RatiosThe shims we offer are available by the individual piece and in standard set ratios. These ratios are selected to permitstepping through the entire range of the set in a certain increment. For example, the standard 5mm -M507 set permitsstepping from 0.25mm to 5.00mm in 0.25mm increments.
Set stackups offered are ones commonly ordered. If your requirements differ, all shims are available by the individual piece.Please note that ordering shims by the set does not mean they will be assembled and packaged as sets! Unless otherarrangements are made in advance, all sets are bulk shipped. We will assemble and package individual sets for anadditional charge.
Part NumbersThis catalog is organized by our own numbering system that is consistant throughout our product lines. Prior to thisnumbering system, there were no recognized standards for part numbers or thickness conventions. (Most of the shim andspacer designs originated from multiple design sources from many different companies over a span of more than sixdecades.) We encourage the use of DSC part numbers to help reduce problems arising from the many inconsistencies andconflicts in the old systems. All original part numbers will continue to be recognized and indexed. If you are having difficultyidentifying a part number, try the index or give us a call for assistance.
Materials and TolerancesUnless otherwise specified, all of our shims are made from full hard 1010 cold rolled #1 temper #2 finish steel. Spacers aremade from cold drawn 1018, machined or stamped and precision ground to the specified thickness. Critical thicknesstolerances are held within ±0.03mm, unless otherwise specified. (Imperial thicknesses are held within ±.002 inches.)
Weld Washers"D" shaped weld washers offer a straight edge for easy welding after final locating of fasteners at assembly. These washersare also used in close clearance locations.
Drawing ConventionsSlots and holes are assumed to be centered unless otherwise noted, in order to reduce clutter in the drawings. Dimensionsfor shims and spacers are given in inches and in [millimeters] between the brackets. Drawings may not be to scale.
Additional Notes:Shims with a thickness of 0.25mm are not black oxided, as they are easily damaged during processing. Shims with athickess of 0.50mm that have long, delicate fingers are not black oxided for the same reason.
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 4
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 52014
DSCH001 Series - Individual ShimsDSC Part No. Description Thickness Other part numbersDSCH001-M025..........DSCH001-M050..........DSCH001-M100..........DSCH001-M200..........DSCH001-E015..........DSCH001-E032..........DSCH001-E062..........
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 Inch.........062 inch........
FSD 34492-54FSD 34492-53FSD 34492-52FSD 34492-51FSD 14180-54FSD 14180-52FSD 14180-51
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.........Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
DSCH001 Series - Shim SetsDSC Part No. Description Thickness Set includesDSCH001-M454...........DSCH001-M505...........DSCH001-M506...........DSCH001-M507...........DSCH001-M605...........DSCH001-E255............
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 Inch
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
.32R [8.1]
.22R [5.6]TYP
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 Inch
DSCH002 Series - Shim SetsDSC Part No. Description Thickness Set includes
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.........Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
DSCH002 Series - Individual ShimsDSC Part No. Description Thickness Other part numbersDSCH002-M025..........DSCH002-M050..........DSCH002-M100..........DSCH002-M200..........DSCH002-E015..........DSCH002-E032..........DSCH002-E062..........
DSCH002-M454...........DSCH002-M505...........DSCH002-M506...........DSCH002-M507...........DSCH002-M605...........DSCH002-E255............
FSD 34493-54, GSD-B-25FSD 34493-53, GSD-B-50FSD 34493-52, GSD-B-1FSD 34493-51, GSD-B-2FSD 14181-54FSD 14181-52FSD 14181-51
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 Inch.........062 inch........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 Inch
DSCH003 Series - Shim SetsDSC Part No. Description Thickness Set includes
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.........Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
DSCH003 Series - Individual ShimsDSC Part No. Description Thickness Other part numbersDSCH003-M025..........DSCH003-M050..........DSCH003-M100..........DSCH003-M200..........DSCH003-E015..........DSCH003-E032..........DSCH003-E062..........
DSCH003-M454...........DSCH003-M505...........DSCH003-M506...........DSCH003-M507...........DSCH003-M605...........DSCH003-E255............
FSD 34494-54FSD 34494-53FSD 34494-52FSD 34494-51FSD 14129-54FSD 14129-52FSD 14129-51
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 Inch.........062 inch........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 Inch
DSCH004 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.........Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
DSCH004 Series - Shim SetsDSC Part No. Description Thickness Set includesDSCH004-M454...........DSCH004-M505...........DSCH004-M506...........DSCH004-M507...........DSCH004-M605...........DSCH004-E255............
DSCH004-M025..........DSCH004-M050..........DSCH004-M100..........DSCH004-M200..........DSCH004-E015..........DSCH004-E032..........DSCH004-E062..........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
FSD 34495-54FSD 34495-53FSD 34495-52FSD 34495-51FSD 14050-54FSD 14050-52FSD 14050-51
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 Inch.........062 inch........
0.40 [10.2]
0.75 [19.1]
0.38 [9.5]
1.00 [25.4]
0.40 [10.2]
1.00 [25.4]
0.50 [12.6]
1.00 [25.4]
0.56 [14.2]
1.00 [25.4]
0.50 [12.7]
1.24 [31.5]
0.37 [9.5]TYP
0.72 [18.3]
0.41 [10.4] 0.90 [22.9]
1.72 [43.7]
0.42 [10.7]
Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleMetric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 62014
.18R [4.6] TYP
.22R [5.6] TYP
.26R [6.6]TYP
.26R [6.6]TYP
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 Inch
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 Inch
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 Inch
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 Inch
DSCH008 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH008 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH007 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH007 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.........Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.........Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
DSCH008-M454...........DSCH008-M505...........DSCH008-M506...........DSCH008-M507...........DSCH008-M605...........DSCH008-E255............
DSCH007-M454...........DSCH007-M505...........DSCH007-M506...........DSCH007-M507...........DSCH007-M605...........DSCH007-E255............
DSCH008-M025..........DSCH008-M050..........DSCH008-M100..........DSCH008-M200..........DSCH008-E015..........DSCH008-E032..........DSCH008-E062..........
DSCH007-M025..........DSCH007-M050..........DSCH007-M100..........DSCH007-M200..........DSCH007-E015..........DSCH007-E032..........DSCH007-E062..........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
FSD 34499-54FSD 34499-53FSD 34499-52FSD 34499-51FSD 14051-54FSD 14051-52FSD 14051-51
FSD 34498-54FSD 34498-53FSD 34498-52FSD 34498-51FSD 14067-54FSD 14067-52FSD 14067-51
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 Inch.........062 inch........
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 Inch.........062 inch........
DSCH006 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.........Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
DSCH006 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH005 Series - Shim SetsDSC Part No. Description Thickness Set includes
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.........Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
DSCH005 Series - Individual ShimsDSC Part No. Description Thickness Other part numbersDSCH005-M025..........DSCH005-M050..........DSCH005-M100..........DSCH005-M200..........DSCH005-E015..........DSCH005-E032..........DSCH005-E062..........
DSCH006-M025..........DSCH006-M050..........DSCH006-M100..........DSCH006-M200..........DSCH006-E015..........DSCH006-E032..........DSCH006-E062..........
DSCH006-M454...........DSCH006-M505...........DSCH006-M506...........DSCH006-M507...........DSCH006-M605...........DSCH006-E255............
DSCH005-M454...........DSCH005-M505...........DSCH005-M506...........DSCH005-M507...........DSCH005-M605...........DSCH005-E255............
FSD 34496-54FSD 34496-53FSD 34496-52FSD 34496-51FSD 14107-54FSD 14107-52FSD 14107-51
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 Inch.........062 inch........
FSD 34497-54FSD 34497-53FSD 34497-52FSD 34497-51FSD 14066-54FSD 14066-52FSD 14066-51
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 Inch.........062 inch........
0.32 [8.1] TYP
0.63 [15.9]0.40 [10.2]
0.32 [8.1]0.62 [15.7]
1.25 [31.8]
0.38 [9.7] TYP
0.75 [19.1]
0.40 [10.2]
0.58 [14.7]
1.38 [35.1]
0.43 [10.9]
0.44 [11.2] TYP
0.49 [12.4]
0.44 [11.2] 0.80 [20.3]
1.68 [42.7]
0.75 [19.1]
0.44 [11.2] TYP
0.49 [12.4]
0.44 [11.2] 1.12 [28.4]
2.00 [50.8]
0.75 [19.0]
Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleMetric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted
2014
.26R [6.6]TYP
R0.26TYP
R0.26 [6.6]TYP
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 Inch
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 Inch
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 Inch
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 Inch
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
DSCH011 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH011 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH012 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH012 Series - Shim SetsDSC Part No. Description Thickness Set includesDSCH012-M454...........DSCH012-M505...........DSCH012-M506...........DSCH012-M507...........DSCH012-M605...........DSCH012-E255............
DSCH011-M454...........DSCH011-M505...........DSCH011-M506...........DSCH011-M507...........DSCH011-M605...........DSCH011-E255............
DSCH012-M025..........DSCH012-M050..........DSCH012-M100..........DSCH012-M200..........DSCH012-E015..........DSCH012-E032..........DSCH012-E062..........
DSCH011-M025..........DSCH011-M050..........DSCH011-M100..........DSCH011-M200..........DSCH011-E015..........DSCH011-E032..........DSCH011-E062..........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
FSD 34502-54FSD 34502-53FSD 34502-52FSD 34502-51FSD 14059-54FSD 14059-52FSD 14059-51
FSD 34503-54FSD 34503-53FSD 34503-52FSD 34503-51FSD 14052-54FSD 14052-52FSD 14052-51
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 Inch.........062 inch........
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 Inch.........062 inch........
DSCH009 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
DSCH009 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH010 Series - Shim SetsDSC Part No. Description Thickness Set includes
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
DSCH010 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH009-M025..........DSCH009-M050..........DSCH009-M100..........DSCH009-M200..........DSCH009-E015..........DSCH009-E032..........DSCH009-E062..........
DSCH010-M025..........DSCH010-M050..........DSCH010-M100..........DSCH010-M200..........DSCH010-E015..........DSCH010-E032..........DSCH010-E062..........
DSCH010-M454...........DSCH010-M505...........DSCH010-M506...........DSCH010-M507...........DSCH010-M605...........DSCH010-E255............
DSCH009-M454...........DSCH009-M505...........DSCH009-M506...........DSCH009-M507...........DSCH009-M605...........DSCH009-E255............
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 Inch.........062 inch........
FSD 34500-54FSD 34500-53FSD 34500-52FSD 34500-51FSD 14056-54FSD 14056-52FSD 14056-51
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
FSD 34501-54FSD 34501-53FSD 34501-52FSD 34501-51FSD 14058-54FSD 14058-52FSD 14058-51
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 Inch.........062 inch........
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 7
0.44 [11.2]TYP (2)
0.49 [12.4]0.75 [19.1]
0.52 [13.2]
0.44 [11.2]TYP (2)
0.49 [12.4]
0.52 [13.2]
0.75 [19.1]
0.44 [11.2]TYP
0.54 [13.7]
1.46 [37.1]
2.38 [60.5]
0.46 [11.7]
0.94 [23.9]
0.44 [11.2]TYP (2)
0.52 [13.2]TYP (2)
0.75 [19.1]
0.44 [11.2]
0.49 [12.4]
0.88 [22.4] TYP
0.44 [11.2] 0.81 [20.6]TYP
2.50 [63.5]
.26R [6.6] TYP
3.50 [88.9]
3.00 [76.2]
0.44 [11.2] 1.06 [26.9]TYP
Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleMetric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted
45°
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 82014
.32R [8.1] TYP
.32R [8.1] TYP
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 Inch
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 Inch
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 Inch
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 Inch
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
DSCH015 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH015 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH016 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH016 Series - Shim SetsDSC Part No. Description Thickness Set includesDSCH016-M454...........DSCH016-M505...........DSCH016-M506...........DSCH016-M507...........DSCH016-M605...........DSCH016-E255............
DSCH015-M454...........DSCH015-M505...........DSCH015-M506...........DSCH015-M507...........DSCH015-M605...........DSCH015-E255............
DSCH016-M025..........DSCH016-M050..........DSCH016-M100..........DSCH016-M200..........DSCH016-E015..........DSCH016-E032..........DSCH016-E062..........
DSCH015-M025..........DSCH015-M050..........DSCH015-M100..........DSCH015-M200..........DSCH015-E015..........DSCH015-E032..........DSCH015-E062..........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
FSD 34506-54FSD 34506-53FSD 34506-52FSD 34506-51FSD 14202-54FSD 14202-52FSD 14202-51
FSD 34507-54FSD 34507-53FSD 34507-52FSD 34507-51FSD 14190-54FSD 14190-52FSD 14190-51
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 Inch.........062 inch........
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 Inch.........062 inch........
DSCH013 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
DSCH013 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH014 Series - Shim SetsDSC Part No. Description Thickness Set includes
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
DSCH014 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH013-M025..........DSCH013-M050..........DSCH013-M100..........DSCH013-M200..........DSCH013-E015..........DSCH013-E032..........DSCH013-E062..........
DSCH014-M025..........DSCH014-M050..........DSCH014-M100..........DSCH014-M200..........DSCH014-E015..........DSCH014-E032..........DSCH014-E062..........
DSCH014-M454...........DSCH014-M505...........DSCH014-M506...........DSCH014-M507...........DSCH014-M605...........DSCH014-E255............
DSCH013-M454...........DSCH013-M505...........DSCH013-M506...........DSCH013-M507...........DSCH013-M605...........DSCH013-E255............
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 Inch.........062 inch........
FSD 34504-54FSD 34504-53FSD 34504-52FSD 34504-51FSD 14053-54FSD 14053-52FSD 14053-51
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
FSD 34505-54FSD 34505-53FSD 34505-52FSD 34505-51FSD 14068-54FSD 14068-52FSD 14068-51
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 Inch.........062 inch........
0.56 [14.2]TYP
0.54 [13.7]
0.66 [16.8] 1.60 [40.6]
1.00 [25.4]
2.92 [74.2]
0.56 [14.2]
0.70 [17.8]
0.58 [14.6] 1.75 [44.5]
2.90 [73.7]
1.00 [25.4]
.32R [8.1] TYP
0.62 [15.6]
0.70 [17.8]
0.56 [14.2]TYP (2)
0.64 [16.3]TYP (2)
1.00 [25.4]
1.00 [25.4] TYP
4.24 [107.7]
0.28 [7.1]
0.56 [14.2]
0.88 [22.4]
0.44 [11.2]
0.44 [11.2]0.22 [5.6]
0.50 [12.7]
1.00 [25.4]
.10R [2.5]TYP
.14R [3.6]TYP
Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleMetric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted
45°
45°
45°
45°
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 92014
DSCH018 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH017 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH020 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH019 Series - Shim SetsDSC Part No. Description Thickness Set includes
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 Inch
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 Inch
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 Inch
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 Inch
DSCH020 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH019 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
DSCH020-M025..........DSCH020-M050..........DSCH020-M100..........DSCH020-M200..........DSCH020-E015..........DSCH020-E032..........DSCH020-E062..........
DSCH020-M454...........DSCH020-M505...........DSCH020-M506...........DSCH020-M507...........DSCH020-M605...........DSCH020-E255............
DSCH019-M454...........DSCH019-M505...........DSCH019-M506...........DSCH019-M507...........DSCH019-M605...........DSCH019-E255............
DSCH019-M025..........DSCH019-M050..........DSCH019-M100..........DSCH019-M200..........DSCH019-E015..........DSCH019-E032..........DSCH019-E062..........
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 Inch.........062 inch........
FSD 34511-54FSD 34511-53FSD 34511-52FSD 34511-51FSD 14076-54FSD 14076-52FSD 14076-51
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
FSD 34510-54FSD 34510-53FSD 34510-52FSD 34510-51FSD 14075-54FSD 14075-52FSD 14075-51
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 Inch.........062 inch........
DSCH018 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
DSCH017 Series - Individual ShimsDSC Part No. Description Thickness Other part numbersDSCH017-M025..........DSCH017-M050..........DSCH017-M100..........DSCH017-M200..........DSCH017-E015..........DSCH017-E032..........DSCH017-E062..........
DSCH018-M454...........DSCH018-M505...........DSCH018-M506...........DSCH018-M507...........DSCH018-M605...........DSCH018-E255............
DSCH018-M025..........DSCH018-M050..........DSCH018-M100..........DSCH018-M200..........DSCH018-E015..........DSCH018-E032..........DSCH018-E062..........
DSCH017-M454...........DSCH017-M505...........DSCH017-M506...........DSCH017-M507...........DSCH017-M605...........DSCH017-E255............
FSD 34508-54FSD 34508-53FSD 34508-52FSD 34508-51FSD 14108-54FSD 14108-52FSD 14108-51
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 Inch.........062 inch........
FSD 34509-54FSD 34509-53FSD 34509-52FSD 34509-51FSD 14109-54FSD 14109-52FSD 14109-51
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 Inch.........062 inch........
0.74 [18.8]
0.37 [9.4]
0.50 [12.7]
0.25 [6.4]
0.50 [12.7]
1.00 [25.4]
0.74 [18.8]
0.37 [9.4]
0.37 [9.4]
0.74 [18.8]
0.62 [15.7]
0.86 [21.8]
0.43 [10.9]
0.43 [10.9]
0.86 [21.8]
0.75 [19.1]
1.50 [38.1]
0.75 [19.1]
1.50 [38.1]
0.86 [21.8]
0.43 [10.9]
0.68 [17.3]
1.36 [34.5]
0.75 [19.1]
1.50 [38.1]
1.00 [25.4]
2.00 [50.8]
.16R [4.1]TYP (2)
.22R [5.6]
.16R [4.1]TYP (2)
.22R [5.6]
1.24 [31.5]
0.62 [15.7]
.13R [3.3]TYP (2)
.18R [4.6]
0.62 [15.7]
.14R [3.6]TYP
Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleMetric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted
1.24 [31.5]
1.24 [31.5]
45°
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 102014
DSCH022 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH021 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH024 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH023 Series - Shim SetsDSC Part No. Description Thickness Set includes
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 Inch
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 Inch
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 Inch
DSCH024 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH023 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
DSCH024-M025..........DSCH024-M050..........DSCH024-M100..........DSCH024-M200..........
DSCH024-M454...........DSCH024-M505...........DSCH024-M506...........DSCH024-M507...........DSCH024-M605...........
DSCH023-M454...........DSCH023-M505...........DSCH023-M506...........DSCH023-M507...........DSCH023-M605...........DSCH023-E255............
DSCH023-M025..........DSCH023-M050..........DSCH023-M100..........DSCH023-M200..........DSCH023-E015..........DSCH023-E032..........DSCH023-E062..........
.25mm............
.50mm............1.00mm..........2.00mm..........
FSD 40800-54FSD 40800-53FSD 40800-52FSD 40800-51
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
DSC-625S-54DSC-625S-53DSC-625S-52DSC-625S-51125187-54125187-52125187-51
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 Inch.........062 inch........
DSCH022 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
DSCH021 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH021-M025..........DSCH021-M050..........DSCH021-M100..........DSCH021-M200..........DSCH021-E015..........DSCH021-E032..........DSCH021-E062..........
DSCH022-M454...........DSCH022-M505...........DSCH022-M506...........DSCH022-M507...........DSCH022-M605...........DSCH022-E255............
DSCH022-M025..........DSCH022-M050..........DSCH022-M100..........DSCH022-M200..........DSCH022-E015..........DSCH022-E032..........DSCH022-E062..........
DSCH021-M454...........DSCH021-M505...........DSCH021-M506...........DSCH021-M507...........DSCH021-M605...........DSCH021-E255............
FSD 39558-54FSD 39558-53FSD 39558-52FSD 39558-51FSD 39600-54FSD 39600-52FSD 39600-51
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 Inch.........062 inch........
FSD 39559-54FSD 39559-53FSD 39559-52FSD 39559-51FSD 39601-54FSD 39601-52FSD 39601-51
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 Inch.........062 inch........
.20R [5.1] TYP
0.74 [18.8]0.37 [9.4]
0.49 [12.4]
0.98 [24.9]
1.24 [31.5]
0.62 [15.7]
0.75 [19.1]
1.50 [38.1]
1.25 [31.8]
3.50 [88.9]
2.75 [69.9]
0.62 [15.7]
1.25 [31.8]
4.75 [120.7]
0.62 [15.7]
5.50 [139.7]
1.25 [31.8]
1.13 [28.7]
1.88 [47.8]
0.62 [15.7]
Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleMetric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 112014
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......
DSCH027 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH028 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH027 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH028 Series - Shim SetsDSC Part No. Description Thickness Set includesDSCH028-M454...........DSCH028-M505...........DSCH028-M506...........DSCH028-M507...........DSCH028-M605...........
DSCH027-M454...........DSCH027-M505...........DSCH027-M506...........DSCH027-M507...........DSCH027-M605...........
DSCH028-M025..........DSCH028-M050..........DSCH028-M100..........DSCH028-M200..........
DSCH027-M025..........DSCH027-M050..........DSCH027-M100..........DSCH027-M200..........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
FSD 40828-50FSD 40828-51FSD 40828-52FSD 40828-53
FSD 40829-50FSD 40829-51FSD 40829-52FSD 40829-53
.25mm............
.50mm............1.00mm..........2.00mm..........
.25mm............
.50mm............1.00mm..........2.00mm..........
DSCH025 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
DSCH026 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH025 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH026 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH025-M025..........DSCH025-M050..........DSCH025-M100..........DSCH025-M200..........
DSCH026-M025..........DSCH026-M050..........DSCH026-M100..........DSCH026-M200..........
DSCH026-M454...........DSCH026-M505...........DSCH026-M506...........DSCH026-M507...........DSCH026-M605...........
DSCH025-M454...........DSCH025-M505...........DSCH025-M506...........DSCH025-M507...........DSCH025-M605...........
.25mm............
.50mm............1.00mm..........2.00mm..........
FSD 40801-54FSD 40801-53FSD 40801-52FSD 40801-51
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
FSD 40827-50FSD 40827-51FSD 40827-52FSD 40827-53
.25mm............
.50mm............1.00mm..........2.00mm..........
0.94 [23.9]
0.50 [12.7] 1.38 [35.1]
2.38 [60.5]
0.54 [13.7]
0.34 [8.7] TYP
0.75 [19.1]
0.26 [6.6]
1.50 [38.1]
0.49 [12.5]TYP
0.44 [11.2]
0.34 [8.7]TYP
0.75 [19.1]
0.49 [12.5]0.26 [6.6]
0.44 [11.2]
1.00 [25.4]
0.34 [8.7]TYP
0.44 [11.2]
0.45 [11.4]
2.00 [50.8]
0.55 [14.0]TYP
0.75 [19.1]
0.40 [10.2]TYP
Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleMetric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 122014
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH032 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH031 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH032 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH031 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......
DSCH032-M454...........DSCH032-M505...........DSCH032-M506...........DSCH032-M507...........DSCH032-M605...........
DSCH031-M454...........DSCH031-M505...........DSCH031-M506...........DSCH031-M507...........DSCH031-M605...........
DSCH032-M025..........DSCH032-M050..........DSCH032-M100..........DSCH032-M200..........
DSCH031-M025..........DSCH031-M050..........DSCH031-M100..........DSCH031-M200..........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
FSD 40894-54FSD 40894-53FSD 40894-52FSD 40894-51
FSD 40893-54FSD 40893-53FSD 40893-52FSD 40893-51
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
.25mm............
.50mm............1.00mm..........2.00mm..........
.25mm............
.50mm............1.00mm..........2.00mm..........
DSCH030 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH029 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH030 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
DSCH029 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH030-M454...........DSCH030-M505...........DSCH030-M506...........DSCH030-M507...........DSCH030-M605...........
DSCH030-M025..........DSCH030-M050..........DSCH030-M100..........DSCH030-M200..........
DSCH029-M454...........DSCH029-M505...........DSCH029-M506...........DSCH029-M507...........DSCH029-M605...........
DSCH029-M025..........DSCH029-M050..........DSCH029-M100..........DSCH029-M200..........
FSD 40892-54FSD 40892-53FSD 40892-52FSD 40892-51
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
.25mm............
.50mm............1.00mm..........2.00mm..........
FSD 40891-54FSD 40891-53FSD 40891-52FSD 40891-51
.25mm............
.50mm............1.00mm..........2.00mm.......... 1.00 [25.4]
0.44 [11.2]
0.50 [12.7]
0.50 [12.7]
1.00 [25.4]
1.50 [38.1]
0.44 [11.2]TYP
0.50 [12.7]
0.44 [11.1] 0.63 [15.9]
1.00 [25.4]
0.44 [11.2]TYP
0.50 [12.7]
0.44 [11.1]
2.13 [54.0]
0.63 [15.9]TYP
1.00 [25.4]
0.44 [11.1] 0.63 [15.9]TYP
0.50 [12.7]
0.44 [11.2]TYP
1.00 [25.4]
2.75 [69.9]
Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleMetric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 132014
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......
DSCH035 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH036 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH035 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH036 Series - Shim SetsDSC Part No. Description Thickness Set includesDSCH036-M454...........DSCH036-M505...........DSCH036-M506...........DSCH036-M507...........DSCH036-M605...........
DSCH035-M454...........DSCH035-M505...........DSCH035-M506...........DSCH035-M507...........DSCH035-M605...........
DSCH036-M025..........DSCH036-M050..........DSCH036-M100..........DSCH036-M200..........
DSCH035-M025..........DSCH035-M050..........DSCH035-M100..........DSCH035-M200..........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
FSD 41257-51FSD 41257-52FSD 41257-53FSD 41257-54
ASH102ASH105ASH110ASH120
.25mm............
.50mm............1.00mm..........2.00mm..........
.25mm............
.50mm............1.00mm..........2.00mm..........
DSCH033 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
DSCH034 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH033 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH034 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH034-M025..........DSCH034-M050..........DSCH034-M100..........DSCH034-M200..........
DSCH034-M454...........DSCH034-M505...........DSCH034-M506...........DSCH034-M507...........DSCH034-M605...........
DSCH033-M454...........DSCH033-M505...........DSCH033-M506...........DSCH033-M507...........DSCH033-M605...........
DSCH033-M025..........DSCH033-M050..........DSCH033-M100..........DSCH033-M200..........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
FSD 41256-51FSD 41256-52FSD 41256-53FSD 41256-54
.25mm............
.50mm............1.00mm..........2.00mm..........
FSD 40895-54FSD 40895-53FSD 40895-52FSD 40895-51
.25mm............
.50mm............1.00mm..........2.00mm..........
0.68 [17.3]
0.68 [17.3]
0.68 [17.3]
0.68 [17.3]
0.34 [8.5]
0.39 [10.0]
0.98 [25.0]
2.56 [65.0]
0.41 [10.5]
Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleUnless noted, metric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted
0.25mm and 2.00mm unfinished0.50mm yellow dichromate1.00mm black oxide
0.44 [11.2] TYP
0.50 [12.7]
0.44 [11.1] 0.63 [15.9] TYP
3.38 [85.7]
1.00 [25.4]
.41Ø [10.5Ø]
0.41 [10.5]
0.25mm and 2.00mm unfinished0.50mm yellow dichromate1.00mm black oxide
0.25mm and 2.00mm unfinished0.50mm yellow dichromate1.00mm black oxide
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 142014
DSCH040 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH039 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH038 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH037 Series - Shim SetsDSC Part No. Description Thickness Set includes
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH040 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH039 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......
DSCH040-M454...........DSCH040-M505...........DSCH040-M506...........DSCH040-M507...........DSCH040-M605...........
DSCH039-M454...........DSCH039-M505...........DSCH039-M506...........DSCH039-M507...........DSCH039-M605...........
DSCH040-M025..........DSCH040-M050..........DSCH040-M100..........DSCH040-M200..........
DSCH039-M025..........DSCH039-M050..........DSCH039-M100..........DSCH039-M200..........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
ASH502ASH505ASH510ASH520
FSD 41260-51, ASH402, 56ZF28684-0FSD 41260-52, ASH405, 56ZF28684-1FSD 41260-53, ASH410, 56ZF28684-2FSD 41260-54, ASH420, 56ZF28684-3
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
.25mm............
.50mm............1.00mm..........2.00mm..........
.25mm............
.50mm............1.00mm..........2.00mm..........
DSCH038 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH037 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
DSCH038-M454...........DSCH038-M505...........DSCH038-M506...........DSCH038-M507...........DSCH038-M605...........
DSCH038-M025..........DSCH038-M050..........DSCH038-M100..........DSCH038-M200..........
DSCH037-M454...........DSCH037-M505...........DSCH037-M506...........DSCH037-M507...........DSCH037-M605...........
DSCH037-M025..........DSCH037-M050..........DSCH037-M100..........DSCH037-M200..........
FSD 41259-51, ASH302, 56ZF28682-0FSD 41259-52, ASH305, 56ZF28682-1FSD 42159-53, ASH310, 56ZF28682-2FSD 41259-54, ASH320, 56ZF28682-3
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
.25mm............
.50mm............1.00mm..........2.00mm..........
FSD 41258-51, ASH202FSD 41258-52, ASH205FSD 41258-53, ASH210FSD 41258-54, ASH220
.25mm............
.50mm............1.00mm..........2.00mm..........
1.34 [34.0]0.41 [10.5]
TYP
0.49 [12.5]
0.37 [9.5] 0.59 [15.0]
0.98 [25.0]
0.41 [10.5]TYP
0.49 [12.5]
0.35 [9.0]
1.89 [48.0]
0.59 [15.0]TYP
0.98 [25.0]
2.48 [63.0]
0.41 [10.5]TYP
0.49 [12.5]
0.35 [9.0] 0.59 [15.0]TYP
0.98 [25.0]
0.41 [10.5]TYP
0.49 [12.5]
0.35 [9.0]
3.07 [78.0]
0.98 [25.0]
0.59 [15.0]TYP
Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleUnless noted, metric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted
0.25mm and 2.00mm unfinished0.50mm yellow dichromate1.00mm black oxide
0.25mm and 2.00mm unfinished0.50mm yellow dichromate1.00mm black oxide
0.25mm and 2.00mm unfinished0.50mm yellow dichromate1.00mm black oxide
0.25mm and 2.00mm unfinished0.50mm yellow dichromate1.00mm black oxide
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 152014
56ZF28685-056ZF28685-156ZF28685-256ZF28685-3
56ZF28686-056ZF28686-156ZF28686-256ZF28686-3
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......
DSCH043 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH044 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH043 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH044 Series - Shim SetsDSC Part No. Description Thickness Set includesDSCH044-M454...........DSCH044-M505...........DSCH044-M506...........DSCH044-M507...........DSCH044-M605...........
DSCH043-M454...........DSCH043-M505...........DSCH043-M506...........DSCH043-M507...........DSCH043-M605...........
DSCH044-M025..........DSCH044-M050..........DSCH044-M100..........DSCH044-M200..........
DSCH043-M025..........DSCH043-M050..........DSCH043-M100..........DSCH043-M200..........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
ACH602ACH605ACH610ACH620
.25mm............
.50mm............1.00mm..........2.00mm..........
.25mm............
.50mm............1.00mm..........2.00mm..........
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
DSCH041 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH042 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH041 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH042 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH042-M025..........DSCH042-M050..........DSCH042-M100..........DSCH042-M200..........
DSCH042-M454...........DSCH042-M505...........DSCH042-M506...........DSCH042-M507...........DSCH042-M605...........
DSCH041-M454...........DSCH041-M505...........DSCH041-M506...........DSCH041-M507...........DSCH041-M605...........
DSCH041-M025..........DSCH041-M050..........DSCH041-M100..........DSCH041-M200..........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
.25mm............
.50mm............1.00mm..........2.00mm..........
56ZF28683-056ZF28683-156ZF28683-256ZF28683-3
.25mm............
.50mm............1.00mm..........2.00mm..........
0.41 [10.4] TYP
0.98 [25.0]
0.37 [9.5] 0.98 [25.0]
1.77 [45.0]
0.49 [12.5]
2.76 [70.0]
0.41 [10.4] TYP
0.98 [25.0]
0.49 [12.5]
0.39 [10.0]0.98 [25.0]TYP
4.33 [110.0]
0.42 [10.6] TYP
4.33 [110.0]
0.79 [20.0]
0.79 [20.0] 2.76 [70.0]
Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleMetric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted
2.21 [56.0]
0.98 [25.0]
0.41 [10.4] TYP
0.49 [12.5]
0.39 [10.0]TYP
0.71 [18.0]
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 162014
ASH302SASH305SASH310SASH320S
ASH402SASH405SASH410SASH420S
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
DSCH047 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH047 Series - Shim SetsDSC Part No. Description Thickness Set includesDSCH047-M454...........DSCH047-M505...........DSCH047-M506...........DSCH047-M507...........DSCH047-M605...........
DSCH047-M025..........DSCH047-M050..........DSCH047-M100..........DSCH047-M200..........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
.25mm............
.50mm............1.00mm..........2.00mm..........
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
DSCH045 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH046 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH045 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH046 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH046-M025..........DSCH046-M050..........DSCH046-M100..........DSCH046-M200..........
DSCH046-M454...........DSCH046-M505...........DSCH046-M506...........DSCH046-M507...........DSCH046-M605...........
DSCH045-M454...........DSCH045-M505...........DSCH045-M506...........DSCH045-M507...........DSCH045-M605...........
DSCH045-M025..........DSCH045-M050..........DSCH045-M100..........DSCH045-M200..........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
.25mm............
.50mm............1.00mm..........2.00mm..........
ASH602ASH605ASH610ASH620
.25mm............
.50mm............1.00mm..........2.00mm..........
0.42 [10.6]TYP
1.97 [50.0]
0.35 [9.0] 1.77 [45.0]
2.48 [63.0]
0.39 [10.0]
1.34 [34.0]
0.34 [8.5]TYP
0.79 [20.0]
0.28 [7.0] 0.39 [10.0] TYP
0.39 [10.0]
1.73 [44.0]
0.34 [8.5]TYP
0.79 [20.0]
0.28 [7.0] 0.39 [10.0] TYP
0.39 [10.0]
Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleMetric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH048 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH048 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
DSCH048-M454...........DSCH048-M505...........DSCH048-M506...........DSCH048-M507...........DSCH048-M605...........
DSCH048-M025..........DSCH048-M050..........DSCH048-M100..........DSCH048-M200..........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
DSC302SDSC305SDSC310SDSC320S
.25mm............
.50mm............1.00mm..........2.00mm..........
0.79 [20.0]
0.28 [7.0]
0.34 [8.5]
1.34 [34.0]
0.25mm and 2.00mm unfinished0.50mm yellow dichromate1.00mm black oxide
0.25mm and 2.00mm unfinished0.50mm yellow dichromate1.00mm black oxide
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 172014
DSC402S, ASH102NDSC405S, ASH105NDSC410S, ASH110NDSC420S, ASH120N
ASH302NASH305NASH310NASH320N
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
DSCH050 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH050 Series - Shim SetsDSC Part No. Description Thickness Set includesDSCH050-M454...........DSCH050-M505...........DSCH050-M506...........DSCH050-M507...........DSCH050-M605...........
DSCH050-M025..........DSCH050-M050..........DSCH050-M100..........DSCH050-M200..........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
.25mm............
.50mm............1.00mm..........2.00mm..........
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
DSCH049 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH049 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH049-M025..........DSCH049-M050..........DSCH049-M100..........DSCH049-M200..........
DSCH049-M454...........DSCH049-M505...........DSCH049-M506...........DSCH049-M507...........DSCH049-M605...........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
.25mm............
.50mm............1.00mm..........2.00mm..........
0.28 [7.0]
0.79 [20.0]
1.73 [44.0]
0.34 [8.5]
Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleMetric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH051 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH051 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......
DSCH051-M454...........DSCH051-M505...........DSCH051-M506...........DSCH051-M507...........DSCH051-M605...........
DSCH051-M025..........DSCH051-M050..........DSCH051-M100..........DSCH051-M200..........
ASH402NASH405NASH410NASH420N
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
.25mm............
.50mm............1.00mm..........2.00mm..........
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH052 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH052 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......
DSCH052-M454...........DSCH052-M505...........DSCH052-M506...........DSCH052-M507...........DSCH052-M605...........
DSCH052-M025..........DSCH052-M050..........DSCH052-M100..........DSCH052-M200..........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
DSC602SDSC605SDSC610SDSC620S
.25mm............
.50mm............1.00mm..........2.00mm..........
0.32 [8.0]
0.35 [9.0]TYP
1.42 [36.0]
0.28 [7.0] 1.57 [40.0]
0.35 [9.0]TYP
0.39 [10.0]
0.59 [15.0]TYP
1.81 [46.0]
0.31 [8.0]
0.79 [20.0]
0.35 [9.0]TYP
0.39 [10.0]
0.59 [15.0]TYP
2.40 [61.0]
0.32 [8.0]
0.79 [20.0]
0.25mm and 2.00mm unfinished0.50mm yellow dichromate1.00mm black oxide
0.25mm and 2.00mm unfinished0.50mm yellow dichromate1.00mm black oxide
1.64 [54.0]
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 182014
(2) 2.00mm, (1) 1.00mm
Metric thickness shim.....Metric thickness shim.....
Three piece metric shim set....
DSCH053 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH053 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH053-M503...........
DSCH053-M100..........DSCH053-M200..........
5.00mm..........
DSC50081-1DSC50081-2
1.00mm..........2.00mm..........
0.43 [11.0]TYP
0.51 [13.0]
1.97 [50.0]
1.18 [30.0]0.39 [10.0]
0.98 [25.0]
Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleMetric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted
DSCH054 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH054 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Metric thickness shim.....Metric thickness shim.....
Three piece metric shim set....DSCH054-M503...........
DSCH054-M100..........DSCH054-M200..........
5.00mm.......... (2) 2.00mm, (1) 1.00mm
DSC50082-1DSC50082-2
1.00mm..........2.00mm..........
Three piece metric shim set....
Metric thickness shim.....Metric thickness shim.....
DSCH055 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH055 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH055-M100..........DSCH055-M200..........
DSCH055-M503...........
DSC50083-1DSC50083-2
5.00mm..........
1.00mm..........2.00mm..........
(2) 2.00mm, (1) 1.00mm
0.43 [11.0]TYP
0.98 [25.0]
0.39 [10.0] 1.97 [50.0]
2.76 [70.0]
0.51 [13.0]
0.63 [16.0]
0.98 [25.0]
2.99 [76.0]
1.97 [50.0]
1.00mm..........2.00mm..........
5.00mm..........
DSCH056 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH056 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Three piece metric shim set....DSCH056-M503...........
Metric thickness shim.....Metric thickness shim.....
DSCH056-M100..........DSCH056-M200..........
(2) 2.00mm, (1) 1.00mm
DSC50084-1DSC50084-2
0.63 [16.0]TYP
1.97 [50.0]
1.38 [35.0] 1.77 [45.0]
4.53 [115.0]
0.98 [25.0]
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 192014
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......
DSCH058 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH058 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH058-M454...........DSCH058-M505...........DSCH058-M506...........DSCH058-M507...........DSCH058-M605...........
DSCH058-M025..........DSCH058-M050..........DSCH058-M100..........DSCH058-M200..........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
GSD-C-25GSD-C-50GSD-C-1GSD-C-2
.25mm............
.50mm............1.00mm..........2.00mm..........
0.34 [8.6] TYP
1.00 [25.4]
0.38 [9.5] 0.75 [19.1]1.50 [38.1]
0.50 [12.7]
Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleMetric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH060 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH059 Series - Shim SetsDSC Part No. Description Thickness Set includes
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
DSCH059 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH060 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH060-M025..........DSCH060-M050..........DSCH060-M100..........DSCH060-M200..........
DSCH060-M454...........DSCH060-M505...........DSCH060-M506...........DSCH060-M507...........DSCH060-M605...........
DSCH059-M454...........DSCH059-M505...........DSCH059-M506...........DSCH059-M507...........DSCH059-M605...........
DSCH059-M025..........DSCH059-M050..........DSCH059-M100..........DSCH059-M200..........
GSD-F-25GSD-F-50GSD-F-1GSD-F-2
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
.25mm............
.50mm............1.00mm..........2.00mm..........
GSD-E-25GSD-E-50GSD-E-1GSD-E-2
.25mm............
.50mm............1.00mm..........2.00mm..........
0.41 [10.4]TYP
1.00 [25.4]
0.50 [12.7]
2.50 [63.5]
0.75 [19.1]
0.50 [12.7]
1.00 [25.4]
0.56 [14.2]TYP
0.50 [12.7]
1.00 [25.4]TYP
0.50 [12.7]
3.00 [76.2]
DSCH057 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH057 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......
DSCH057-M454...........DSCH057-M505...........DSCH057-M506...........DSCH057-M507...........DSCH057-M605...........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
DSCH057-M025..........DSCH057-M050..........DSCH057-M100..........DSCH057-M200..........
.25mm............
.50mm............1.00mm..........2.00mm..........
GSD-A-25GSD-A-50GSD-A-1GSD-A-2
0.34 [8.6]
0.38 [9.5]
0.75 [19.1]
0.75 [19.1]
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 202014
DSCH062 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH061 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......
DSCH062-M454...........DSCH062-M505...........DSCH062-M506...........DSCH062-M507...........DSCH062-M605...........
DSCH061-M454...........DSCH061-M505...........DSCH061-M506...........DSCH061-M507...........DSCH061-M605...........
DSCH062-M025..........DSCH062-M050..........DSCH062-M100..........DSCH062-M200..........
DSCH061-M025..........DSCH061-M050..........DSCH061-M100..........DSCH061-M200..........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
GSD-H-25GSD-H-50GSD-H-1GSD-H-2
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
GSD-G-25GSD-G-50GSD-G-1GSD-G-2
.25mm............
.50mm............1.00mm..........2.00mm..........
.25mm............
.50mm............1.00mm..........2.00mm..........
DSCH061 Series - Shim SetsDSC Part No. Description Thickness Set includes
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH062 Series - Shim SetsDSC Part No. Description Thickness Set includes
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
4.00 [101.6]
1.00 [25.4]TYP
0.50 [12.7]
0.50 [12.7]
1.00 [25.4]
0.56 [14.2]TYP
Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleMetric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted
0.56 [14.2]TYP
1.00 [25.4]
0.50 [12.7]
0.50 [12.7] 1.00 [25.4] TYP
5.00 [127.0]
Note regarding NAAMS Standard ComponentsWhile Douglas Stamping Company has always specialized in providing high quality shims,spacers and washers to a wide range of industry and end users, we also provide a varietyof details and components used in automated welding machines and production equipment.
Most of these items are not cataloged, as they are part of readily available industrialstandards. For specific part numbers and engineering information, please visithttp://naamssstandards.org. We provide all of the shims, spacers, washers, L-blocks, stopblocks, locating pins and retainers listed, most of the stub shafts, and many othercomponents. Please contact us for price and availablity. Examples of many of these itemscan be found on pages 63 and 64.
We also continue to provide obsolete FSD, Ford, Chrysler, GM and other industrialstandard shims, spacers, L-blocks, stop blocks, locating pins, retainers and stub shafts, andare capable of producing special and custom components to print using traditional stampingmethods and in-house laser cutting.
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 21
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 inch
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 inch
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 inch
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 inch
DSCH065 Series - Shim SetsDSC Part No. Description Thickness Set includes
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.........Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
DSCH065 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH066 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.........Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
DSCH066 Series - Shim SetsDSC Part No. Description Thickness Set includesDSCH066-M454...........DSCH066-M505...........DSCH066-M506...........DSCH066-M507...........DSCH066-M605...........DSCH066-E255............
DSCH065-M454...........DSCH065-M505...........DSCH065-M506...........DSCH065-M507...........DSCH065-M605...........DSCH065-E255............
DSCH066-M025..........DSCH066-M050..........DSCH066-M100..........DSCH066-M200..........DSCH066-E015..........DSCH066-E032..........DSCH066-E062..........
DSCH065-M025..........DSCH065-M050..........DSCH065-M100..........DSCH065-M200..........DSCH065-E015..........DSCH065-E032..........DSCH065-E062..........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
M FS 15-CCCCM FS 15-CCCM FS 15-CCM FS 15-CFS 15-CCCFS 15-CCFS 15-C
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
M FS 15-DDDDM FS 15-DDDM FS 15-DDM FS 15-DFS 15-DDDFS 15-DDFS 15-D
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 inch.........062 inch........
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 inch.........062 inch........
DSCH063 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.........Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
DSCH063 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH064 Series - Shim SetsDSC Part No. Description Thickness Set includes
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.........Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
DSCH064 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH063-M025..........DSCH063-M050..........DSCH063-M100..........DSCH063-M200..........DSCH063-E015..........DSCH063-E032..........DSCH063-E062..........
DSCH064-M025..........DSCH064-M050..........DSCH064-M100..........DSCH064-M200..........DSCH064-E015..........DSCH064-E032..........DSCH064-E062..........
DSCH064-M454...........DSCH064-M505...........DSCH064-M506...........DSCH064-M507...........DSCH064-M605...........DSCH064-E255............
DSCH063-M454...........DSCH063-M505...........DSCH063-M506...........DSCH063-M507...........DSCH063-M605...........DSCH063-E255............
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 inch.........062 inch........
M FS 15-AAAAM FS 15-AAAM FS 15-AAM FS 15-AFS 15-AAAFS 15-AAFS 15-A
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
M FS 15-BBBBM FS 15-BBBM FS 15-BBM FS 15-BFS 15-BBBFS 15-BBFS 15-B
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 inch.........062 inch........
0.34 [8.6] 0.75 [19.1]
0.34 [8.6]0.28 [7.1]
0.50 [12.6]
0.45 [11.4]1.00 [25.4]
0.30 [7.6]
1.00 [25.4]
0.28 [7.1]0.34 [8.6]
1.00 [25.4]
0.50 [12.6]
0.30 [7.6]1.00 [25.4]
0.45 [11.4]
0.24 [6.0]
0.34 [8.6] 0.28 [7.1]
0.31 [7.9]
0.45 [11.4]1.00 [25.4]
0.30 [7.6]
0.63 [16.0]
Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleMetric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 22
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 inch
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 inch
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 inch
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 inch
DSCH070 Series - Shim SetsDSC Part No. Description Thickness Set includes
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.........Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
DSCH070 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH069 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.........Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
DSCH069 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH070-M025..........DSCH070-M050..........DSCH070-M100..........DSCH070-M200..........DSCH070-E015..........DSCH070-E032..........DSCH070-E062..........
DSCH070-M454...........DSCH070-M505...........DSCH070-M506...........DSCH070-M507...........DSCH070-M605...........DSCH070-E255............
DSCH069-M454...........DSCH069-M505...........DSCH069-M506...........DSCH069-M507...........DSCH069-M605...........DSCH069-E255............
DSCH069-M025..........DSCH069-M050..........DSCH069-M100..........DSCH069-M200..........DSCH069-E015..........DSCH069-E032..........DSCH069-E062..........
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 inch.........062 inch........
M FS 15-HHHH, GSD-D-25M FS 15-HHH, GSD-D-50M FS 15-HH, GSD-D-1M FS 15-H, GSD-D-2FS 15-HHHFS 15-HHFS 15-H
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
M FS 15-GGGGM FS 15-GGGM FS 15-GGM FS 15-GFS 15-GGGFS 15-GGFS 15-G
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 inch.........062 inch........
DSCH068 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.........Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
DSCH068 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH067 Series - Shim SetsDSC Part No. Description Thickness Set includes
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.........Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
DSCH067 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH067-M025..........DSCH067-M050..........DSCH067-M100..........DSCH067-M200..........DSCH067-E015..........DSCH067-E032..........DSCH067-E062..........
DSCH068-M454...........DSCH068-M505...........DSCH068-M506...........DSCH068-M507...........DSCH068-M605...........DSCH068-E255............
DSCH068-M025..........DSCH068-M050..........DSCH068-M100..........DSCH068-M200..........DSCH068-E015..........DSCH068-E032..........DSCH068-E062..........
DSCH067-M454...........DSCH067-M505...........DSCH067-M506...........DSCH067-M507...........DSCH067-M605...........DSCH067-E255............
M FS 15-EEEEM FS 15-EEEM FS 15-EEM FS 15-EFS 15-EEEFS 15-EEFS 15-E
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 inch.........062 inch........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
M FS 15-FFFFM FS 15-FFFM FS 15-FFM FS 15-FFS 15-FFFFS 15-FFFS 15-F
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 inch.........062 inch........
0.28 [7.1]0.34 [8.6]
0.50 [12.6]
0.45 [11.4]
1.38 [34.9]
0.25 [6.4]
0.24 [6.0]
1.00 [25.4]
0.34 [8.6]0.28 [7.1] TYP (2)
0.24 [6.0]
1.38 [34.9]
0.45 [11.4]TYP
0.50 [12.7]1.00 [25.4]
0.28 [7.1]TYP (2)
0.34 [8.6]TYP (2)
0.50 [12.7]
1.88 [47.8]
0.45 [11.4]TYP
0.24 [6.1]
1.00 [25.4]
1.88 [47.8]
0.34 [8.6] TYP
1.00 [25.4]
0.44 [11.2] 0.50 [12.7]TYP
0.50 [12.7]
Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleMetric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 23
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 inch
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 inch
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 inch
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 inch
DSCH074 Series - Shim SetsDSC Part No. Description Thickness Set includes
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.........Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
DSCH074 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH073 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.........Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
DSCH073 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH074-M454...........DSCH074-M505...........DSCH074-M506...........DSCH074-M507...........DSCH074-M605...........DSCH074-E255............
DSCH073-M454...........DSCH073-M505...........DSCH073-M506...........DSCH073-M507...........DSCH073-M605...........DSCH073-E255............
DSCH074-M025..........DSCH074-M050..........DSCH074-M100..........DSCH074-M200..........DSCH074-E015..........DSCH074-E032..........DSCH074-E062..........
DSCH073-M025..........DSCH073-M050..........DSCH073-M100..........DSCH073-M200..........DSCH073-E015..........DSCH073-E032..........DSCH073-E062..........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
M FS 15-MMMMM FS 15-MMMM FS 15-MMM FS 15-MFS 15-MMMFS 15-MMFS 15-M
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
M FS 15-LLLLM FS 15-LLLM FS 15-LLM FS 15-LFS 15-LLLFS 15-LLFS 15-L
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 inch.........062 inch........
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 inch.........062 inch........
DSCH072 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.........Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
DSCH072 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH071 Series - Shim SetsDSC Part No. Description Thickness Set includes
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.........Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
DSCH071 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH071-M025..........DSCH071-M050..........DSCH071-M100..........DSCH071-M200..........DSCH071-E015..........DSCH071-E032..........DSCH071-E062..........
DSCH072-M025..........DSCH072-M050..........DSCH072-M100..........DSCH072-M200..........DSCH072-E015..........DSCH072-E032..........DSCH072-E062..........
DSCH072-M454...........DSCH072-M505...........DSCH072-M506...........DSCH072-M507...........DSCH072-M605...........DSCH072-E255............
DSCH071-M454...........DSCH071-M505...........DSCH071-M506...........DSCH071-M507...........DSCH071-M605...........DSCH071-E255............
M FS 15-JJJJM FS 15-JJJM FS 15-JJM FS 15-JFS 15-JJJFS 15-JJFS 15-J
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 inch.........062 inch........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
M FS 15-KKKKM FS 15-KKKM FS 15-KKM FS 15-KFS 15-KKKFS 15-KKFS 15-K
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 inch.........062 inch........
0.28 [7.1] TYP (2)0.34 [8.6]
0.45 [11.4]TYP
1.38 [35.1]0.24 [6.1]
0.75 [19.1]0.38 [9.7]
0.28 [7.1] TYP (2)0.34 [8.6]TYP (2)
0.38 [9.7]0.75 [19.1]
0.24 [6.1] 0.45 [11.4]TYP
1.88 [47.8]
0.28 [7.1]0.34 [8.6]TYP (2)
0.38 [9.7]
0.30 [7.6]
1.50 [38.1]
0.45 [11.4]TYP
0.75 [19.1]
1.50 [38.1]0.28 [7.1]
1.00 [25.4]
0.45 [11.4]TYP
0.30 [7.6]
0.50 [12.7]
0.34 [8.6]TYP (2)
Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleMetric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 24
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 inch
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 inch
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 inch
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 inch
DSCH078 Series - Shim SetsDSC Part No. Description Thickness Set includes
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.........Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
DSCH078 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH077 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.........Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
DSCH077 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH078-M454...........DSCH078-M505...........DSCH078-M506...........DSCH078-M507...........DSCH078-M605...........DSCH078-E255............
DSCH077-M454...........DSCH077-M505...........DSCH077-M506...........DSCH077-M507...........DSCH077-M605...........DSCH077-E255............
DSCH078-M025..........DSCH078-M050..........DSCH078-M100..........DSCH078-M200..........DSCH078-E015..........DSCH078-E032..........DSCH078-E062..........
DSCH077-M025..........DSCH077-M050..........DSCH077-M100..........DSCH077-M200..........DSCH077-E015..........DSCH077-E032..........DSCH077-E062..........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
M FS 15-TTTTM FS 15-TTTM FS 15-TTM FS 15-TFS 15-TTTFS 15-TTFS 15-T
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
M FS 15-RRRRM FS 15-RRRM FS 15-RRM FS 15-RFS 15-RRRFS 15-RRFS 15-R
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 inch.........062 inch........
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 inch.........062 inch........
DSCH076 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.........Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
DSCH076 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH075 Series - Shim SetsDSC Part No. Description Thickness Set includes
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.........Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
DSCH075 Series - Individual ShimsDSC Part No. Description Thickness Other part numbersDSCH075-M025..........DSCH075-M050..........DSCH075-M100..........DSCH075-M200..........DSCH075-E015..........DSCH075-E032..........DSCH075-E062..........
DSCH076-M025..........DSCH076-M050..........DSCH076-M100..........DSCH076-M200..........DSCH076-E015..........DSCH076-E032..........DSCH076-E062..........
DSCH076-M454...........DSCH076-M505...........DSCH076-M506...........DSCH076-M507...........DSCH076-M605...........DSCH076-E255............
DSCH075-M454...........DSCH075-M505...........DSCH075-M506...........DSCH075-M507...........DSCH075-M605...........DSCH075-E255............
M FS 15-NNNNM FS 15-NNNM FS 15-NNM FS 15-NFS 15-NNNFS 15-NNFS 15-N
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 inch.........062 inch........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
M FS 15-PPPPM FS 15-PPPM FS 15-PPM FS 15-PFS 15-PPPFS 15-PPFS 15-P
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 inch.........062 inch........
0.34 [8.6]
1.38 [35.1]0.69 [17.5]
0.75 [19.1]
0.34 [8.6]TYP
1.25 [31.8]
0.38 [9.5] 0.50 [12.7]TYP
2.75 [69.9]
0.50 [12.7]
0.34 [8.6]TYP
0.38 [9.5]
0.31 [7.9]
1.38 [34.9]
0.75 [19.1]
1.25 [31.8]
0.34 [8.6] TYP1.75 [44.5]
0.38 [9.5]
1.25 [31.8]
0.38 [9.5]0.50 [12.7] TYP
Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleMetric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted
FS 15-W
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 25
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 inch
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 inch
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 inch
DSCH081 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.........Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
DSCH081 Series - Shim SetsDSC Part No. Description Thickness Set includesDSCH081-M454...........DSCH081-M505...........DSCH081-M506...........DSCH081-M507...........DSCH081-M605...........DSCH081-E255............
DSCH081-M025..........DSCH081-M050..........DSCH081-M100..........DSCH081-M200..........DSCH081-E015..........DSCH081-E032..........DSCH081-E062..........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
M FS 15-WWWW, GSD-K-25M FS 15-WWW, GSD-K-50M FS 15-WW, GSD-K-1M FS 15-W, GSD-K-2FS 15-WWWFS 15-WWFS 15-W
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 inch.........062 inch........
DSCH080 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.........Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
DSCH080 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH079 Series - Shim SetsDSC Part No. Description Thickness Set includes
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.........Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........
DSCH079 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH079-M025..........DSCH079-M050..........DSCH079-M100..........DSCH079-M200..........DSCH079-E015..........DSCH079-E032..........DSCH079-E062..........
DSCH080-M025..........DSCH080-M050..........DSCH080-M100..........DSCH080-M200..........DSCH080-E015..........DSCH080-E032..........DSCH080-E062..........
DSCH080-M454...........DSCH080-M505...........DSCH080-M506...........DSCH080-M507...........DSCH080-M605...........DSCH080-E255............
DSCH079-M454...........DSCH079-M505...........DSCH079-M506...........DSCH079-M507...........DSCH079-M605...........DSCH079-E255............
M FS 15-UUUUM FS 15-UUUM FS 15-UUM FS 15-UFS 15-UUUFS 15-UUFS 15-U
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 inch.........062 inch........
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
M FS 15-VVVV, GSD-J-25M FS 15-VVV, GSD-J-50M FS 15-VV, GSD-J-1M FS 15-V, GSD-J-2FS 15-VVVFS 15-VVFS 15-V
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........
.25mm............
.50mm............1.00mm..........2.00mm...........015 inch.........031 inch.........062 inch........
1.00 [25.4]0.34 [8.6]
TYP
1.00 [25.4]
0.28 [7.0]0.45 [11.4]
0.28 [7.1]
0.56 [14.2]TYP
0.50 [12.7]
1.00 [25.4] TYP
6.00 [152.4]
0.50 [12.7]
1.00 [25.4]
3.00 [76.2]0.56 [14.2] TYP
2.00 [50.8]
0.50 [12.7]1.00 [25.4] TYP
0.50 [12.7]
(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH082 Series - Shim SetsDSC Part No. Description Thickness Set includes
Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.........Seven piece metric shim set...Five piece metric shim set.......
Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....
DSCH082 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH082-M454...........DSCH082-M505...........DSCH082-M506...........DSCH082-M507...........DSCH082-M605...........
DSCH082-M025..........DSCH082-M050..........DSCH082-M100..........DSCH082-M200..........
DSC302LDSC305LDSC310LDSC320L
4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........
.25mm............
.50mm............1.00mm..........2.00mm..........
0.43 [11.0] 0.63 [16.0]TYP
0.43 [11.0]
2.15 [54.5]
2.13 [54.0]0.35 [9.0] TYP
Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleMetric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 26
Ø0.56[14.2]
Ø0.44 [11.2]TYP
(1) .062 inch, (2) .031 inch, (2) .015 inch
(1) .062 inch, (2) .031 inch, (2) .015 inch
DSCH084 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Inch thickness shim........Inch thickness shim........Inch thickness shim........
Five piece inch shim set..........(This set also known as
42-530-2525)
DSCH084 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH083 Series - Shim SetsDSC Part No. Description Thickness Set includes
Five piece inch shim set..........(This set also known as
42-530-2500)
Inch thickness shim........Inch thickness shim........Inch thickness shim........
DSCH083 Series - Individual ShimsDSC Part No. Description Thickness Other part numbersDSCH083-E015..........DSCH083-E032..........DSCH083-E062..........
DSCH084-E155............
DSCH084-E015..........DSCH084-E032..........DSCH084-E062..........
DSCH083-E155............
CSS 33-3CSS 33-1CSS 33-2
.015 inch........
.031 inch........
.062 inch........
.150 inch........
CSS 35-3CSS 35-1CSS 35-2
.150 inch........
.015 inch........
.031 inch........
.062 inch........
(1) .062 inch, (2) .031 inch, (2) .015 inch
(1) .062 inch, (2) .031 inch, (2) .015 inchFive piece inch shim set..........(This set also known as
42-530-2575)
Five piece inch shim set..........(This set also known as
42-530-2600)
DSCH086 Series - Shim SetsDSC Part No. Description Thickness Set includes
Inch thickness shim........Inch thickness shim........Inch thickness shim........
DSCH086 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH085 Series - Shim SetsDSC Part No. Description Thickness Set includes
Inch thickness shim........Inch thickness shim........Inch thickness shim........
DSCH085 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH086-E155............
DSCH086-E015..........DSCH086-E032..........DSCH086-E062..........
DSCH085-E155............
DSCH085-E015..........DSCH085-E032..........DSCH085-E062..........
.150 inch........
CSS 44-3CSS 44-1CSS 44-2
.150 inch........
.015 inch........
.031 inch........
.062 inch........
CSS 37-3CSS 37-1CSS 37-2
.015 inch........
.031 inch........
.062 inch........
1.25 [31.8]
0.75 [19.1]
0.50 [12.7]0.38 [9.5]
0.75 [19.1]
0.75 [19.1]
Ø0.44 [11.2]TYP 1.75 [44.5]
0.75 [19.1]
0.50 [12.7]TYP
0.38 [9.5]
Ø0.44 [11.2]
1.00 [25.4]
1.00 [25.4]
Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleSets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleMetric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 27
(1) .062 inch, (2) .031 inch, (2) .015 inch
(1) .062 inch, (2) .031 inch, (2) .015 inch
(1) .062 inch, (2) .031 inch, (2) .015 inch
(1) .062 inch, (2) .031 inch, (2) .015 inch
Five piece inch shim set..........(This set also known as
42-530-2700)
Five piece inch shim set..........(This set also known as
42-530-2675)
DSCH090 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH090 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH089 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH089 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Inch thickness shim........Inch thickness shim........Inch thickness shim........
Inch thickness shim........Inch thickness shim........Inch thickness shim........
DSCH090-E155............
DSCH089-E155............
DSCH090-E015..........DSCH090-E032..........DSCH090-E062..........
DSCH089-E015..........DSCH089-E032..........DSCH089-E062..........
.150 inch........
CSS 88-3CSS 88-1CSS 88-2
CSS 66-3CSS 66-1CSS 66-2
.150 inch........
.015 inch........
.031 inch........
.062 inch........
.015 inch........
.031 inch........
.062 inch........
Five piece inch shim set..........(This set also known as
42-530-2650)
Five piece inch shim set..........(This set also known as
42-530-2625)
DSCH088 Series - Shim SetsDSC Part No. Description Thickness Set includes
Inch thickness shim........Inch thickness shim........Inch thickness shim........
DSCH088 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH087 Series - Shim SetsDSC Part No. Description Thickness Set includes
Inch thickness shim........Inch thickness shim........Inch thickness shim........
DSCH087 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH088-E155............
DSCH088-E015..........DSCH088-E032..........DSCH088-E062..........
DSCH087-E155............
DSCH087-E015..........DSCH087-E032..........DSCH087-E062..........
.150 inch........
CSS 48-3CSS 48-1CSS 48-2
.150 inch........
.015 inch........
.031 inch........
.062 inch........
CSS 46-3CSS 46-1CSS 46-2
.015 inch........
.031 inch........
.062 inch........
Ø0.44 [11.2]TYP
1.50 [38.1]
1.50 [38.1]
0.38 [9.5] 0.75 [19.1]
0.38 [9.5]
0.75 [19.1]
Ø0.44 [11.2]TYP 1.50 [38.1]
1.00 [25.4]
0.50 [12.7]0.50 [12.7]
Ø0.44 [11.2]TYP
2.00 [50.8]
1.00 [25.4]
0.50 [12.7]TYP
0.50 [12.7]
2.00 [50.8]
2.00 [50.8]
0.63 [15.9]TYP0.38 [9.5]
0.38 [9.5]
1.24 [31.5]
Ø0.44 [11.2]TYP
Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleSets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleMetric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 28
(1) .062 inch, (2) .031 inch, (2) .015 inch
(1) .062 inch, (2) .031 inch, (2) .015 inch
(1) .062 inch, (2) .031 inch, (2) .015 inch
(1) .062 inch, (2) .031 inch, (2) .015 inch
Five piece inch shim set..........(This set also known as
42-530-2800)
Inch thickness shim........Inch thickness shim........Inch thickness shim........
Inch thickness shim........Inch thickness shim........Inch thickness shim........
DSCH093 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH093 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH094 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH094 Series - Shim SetsDSC Part No. Description Thickness Set includes
Five piece inch shim set..........(This set also known as
42-530-2775)
DSCH094-E155............
DSCH093-E155............
DSCH094-E015..........DSCH094-E032..........DSCH094-E062..........
DSCH093-E015..........DSCH093-E032..........DSCH093-E062..........
.150 inch........
.150 inch........
CSS 410-3CSS 410-1CSS 410-2
CSS 412-3CSS 412-1CSS 412-2
.015 inch........
.031 inch........
.062 inch........
.015 inch........
.031 inch........
.062 inch........
DSCH091 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Inch thickness shim........Inch thickness shim........Inch thickness shim........
DSCH091 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH092 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Inch thickness shim........Inch thickness shim........Inch thickness shim........
DSCH092 Series - Shim SetsDSC Part No. Description Thickness Set includes
Five piece inch shim set..........(This set also known as
42-530-2725)
Five piece inch shim set..........(This set also known as
42-530-2750)
DSCH092-E015..........DSCH092-E032..........DSCH092-E062..........
DSCH092-E155............
DSCH091-E155............
DSCH091-E015..........DSCH091-E032..........DSCH091-E062..........
.150 inch........
CSS 99-3CSS 99-1CSS 99-2
.150 inch........
.015 inch........
.031 inch........
.062 inch........
CSS 89-3CSS 89-1CSS 89-2
.015 inch........
.031 inch........
.062 inch........
Ø0.44 [11.2]TYP (2)
Ø1.03 [26.2]
2.00 [50.8]
1.13 [28.6]2.25 [57.2]
1.00 [25.4]
0.81 [20.6]TYP
2.24 [56.9]
1.12 [28.4]
0.75 [19.1] TYP0.37 [9.4]
1.12 [28.4]
0.37 [9.4]
1.50 [38.1]2.24 [56.9]
Ø0.75[19.1]
Ø0.56 [14.2]TYP
2.50 [63.5]
1.00 [25.4]
0.50 [12.7]0.50 [12.7]
TYP
Ø0.44 [11.2]TYP
1.00 [25.4]TYP
0.50 [12.7]
1.00 [25.4]
3.00 [76.2]
Ø0.44 [11.2]TYP
Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleSets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleMetric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 29
(1) .062 inch, (2) .031 inch, (2) .015 inch
(1) .062 inch, (2) .031 inch, (2) .015 inch
(1) .062 inch, (2) .031 inch, (2) .015 inch
(1) .062 inch, (2) .031 inch, (2) .015 inch
Five piece inch shim set..........(This set also known as
42-530-2900)
DSCH098 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH098 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH097 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH097 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
Inch thickness shim........Inch thickness shim........Inch thickness shim........
Inch thickness shim........Inch thickness shim........Inch thickness shim........
Five piece inch shim set..........(This set also known as
42-530-2925)
DSCH098-E155............
DSCH097-E155............
DSCH098-E015..........DSCH098-E032..........DSCH098-E062..........
DSCH097-E015..........DSCH097-E032..........DSCH097-E062..........
.150 inch........
CSS 1010-3CSS 1010-1CSS 1010-2
CSS 812-3CSS 812-1CSS 812-2
.150 inch........
.015 inch........
.031 inch........
.062 inch........
.015 inch........
.031 inch........
.062 inch........
Five piece inch shim set..........(This set also known as
42-530-2850)
Five piece inch shim set..........(This set also known as
42-530-2825)
DSCH096 Series - Shim SetsDSC Part No. Description Thickness Set includes
Inch thickness shim........Inch thickness shim........Inch thickness shim........
DSCH096 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH095 Series - Shim SetsDSC Part No. Description Thickness Set includes
Inch thickness shim........Inch thickness shim........Inch thickness shim........
DSCH095 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH096-E155............
DSCH096-E015..........DSCH096-E032..........DSCH096-E062..........
DSCH095-E155............
DSCH095-E015..........DSCH095-E032..........DSCH095-E062..........
.150 inch........
CSS 512-3CSS 512-1CSS 512-2
.150 inch........
.015 inch........
.031 inch........
.062 inch........
CSS 510-3CSS 510-1CSS 510-2
.015 inch........
.031 inch........
.062 inch........
Ø0.44 [11.2]TYP 2.50 [63.5]
1.25 [31.8]
0.88 [22.2]TYP
0.38 [9.5]
Ø0.44 [11.2]TYP
0.38 [9.5] 1.13 [28.6]TYP
1.25 [31.8]
3.00 [76.2]
Ø0.44 [11.2]TYP 2.50 [63.5]
1.74 [44.2] 2.50 [63.5]
0.38 [9.5]
0.88 [22.2]TYP (4)
0.38 [9.5]
Ø0.44 [11.2]TYP
2.00 [50.8]
0.63 [15.9]
3.00 [76.2]
0.38 [9.5]
0.63 [15.9]
0.38 [9.5]
0.63 [15.9]
HOLE PATTERN ISSYMMETRICAL ALONGDIAGONAL
Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleSets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleMetric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 30
DSCH099-E015..........DSCH099-E032..........DSCH099-E062..........
DSCH099-E155............
DSCH100-E015..........DSCH100-E032..........DSCH100-E062..........
DSCH100-E155............
DSCH099 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH099 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH100 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH100 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH101-E015..........DSCH101-E032..........DSCH101-E062..........
DSCH102-E015..........DSCH102-E032..........DSCH102-E062..........
DSCH101-E155............
DSCH102-E155............
DSCH101 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH101 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH102 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH102 Series - Shim SetsDSC Part No. Description Thickness Set includes
(1) .062 inch, (2) .031 inch, (2) .015 inchFive piece inch shim set..........(This set also known as
42-530-3025)
.150 inch........
(1) .062 inch, (2) .031 inch, (2) .015 inch
(1) .062 inch, (2) .031 inch, (2) .015 inchFive piece inch shim set..........(This set also known as
42-530-3000)
Inch thickness shim........Inch thickness shim........Inch thickness shim........
CSS 1218-3CSS 1218-1CSS 1218-2
.015 inch........
.031 inch........
.062 inch........
.150 inch........
Five piece inch shim set..........(This set also known as
42-530-2975)
Inch thickness shim........Inch thickness shim........Inch thickness shim........
CSS 1214-3CSS 1214-1CSS 1214-2
.015 inch........
.031 inch........
.062 inch........
.150 inch........
(1) .062 inch, (2) .031 inch, (2) .015 inchFive piece inch shim set..........(This set also known as
42-530-2950)
Inch thickness shim........Inch thickness shim........Inch thickness shim........
CSS 1212-3CSS 1212-1CSS 1212-2
.015 inch........
.031 inch........
.062 inch........
.150 inch........
Inch thickness shim........Inch thickness shim........Inch thickness shim........
.015 inch........
.031 inch........
.062 inch........
CSS 1012-3CSS 1012-1CSS 1012-2
Ø0.44 [11.2]TYP
2.50 [63.5]
3.00 [76.2]
1.00 [25.4]
0.38 [9.5]
1.25 [31.8]
2.24 [56.9]
0.38 [9.5]
1.25 [31.8] 1.00 [25.4]
0.38 [9.5]
1.00 [25.4]
2.75 [69.9]
4.50 [114.3]
3.00 [76.2]
HOLE PATTERN ISSYMMETRICAL ALONGDIAGONAL
HOLE PATTERN ISSYMMETRICAL ALONGDIAGONAL
Ø0.44 [11.2]TYP
HOLE PATTERN ISSYMMETRICAL ALONGDIAGONAL
0.38 [9.5]
1.25 [31.8] 1.00 [25.4]
0.38 [9.5]
1.00 [25.4]
3.50 [88.9]
3.00 [76.2]Ø0.44 [11.2]TYP
HOLE PATTERN ISSYMMETRICAL ALONGDIAGONAL
3.00 [76.2]
0.38 [9.5]1.63 [41.3]
0.63 [15.9]
0.38 [9.5]
0.63 [15.9]
3.00 [76.2]
0.38 [9.5]
Ø0.44 [11.2]TYP
Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleSets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleMetric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted
CSS 1616
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 31
(1) .062 inch, (2) .031 inch, (2) .015 inch
(1) .062 inch, (2) .031 inch, (2) .015 inch
(1) .062 inch, (2) .031 inch, (2) .015 inch
(1) .062 inch, (2) .031 inch, (2) .015 inch
Inch thickness shim........Inch thickness shim........Inch thickness shim........
Inch thickness shim........Inch thickness shim........Inch thickness shim........
Five piece inch shim set..........(This set also known as
42-530-4000)
Five piece inch shim set..........(This set also known as
42-530-4025)
DSCH106 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH106 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH105 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH105 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH106-E155............
DSCH105-E155............
DSCH106-E015..........DSCH106-E032..........DSCH106-E062..........
DSCH105-E015..........DSCH105-E032..........DSCH105-E062..........
.150 inch........
CSS 1816-3CSS 1816-1CSS 1816-2
.150 inch........
CSS 1822-3CSS 1822-1CSS 1822-2
.015 inch........
.031 inch........
.062 inch........
.015 inch........
.031 inch........
.062 inch........
Inch thickness shim........Inch thickness shim........Inch thickness shim........
Inch thickness shim........Inch thickness shim........Inch thickness shim........
Five piece inch shim set..........(This set also known as
42-530-3050)
Five piece inch shim set..........(This set also known as
42-530-3075)
DSCH104 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH104 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH103 Series - Shim SetsDSC Part No. Description Thickness Set includes
DSCH103 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers
DSCH104-E155............
DSCH104-E015..........DSCH104-E032..........DSCH104-E062..........
DSCH103-E155............
DSCH103-E015..........DSCH103-E032..........DSCH103-E062..........
.150 inch........
CSS 1616-3CSS 1616-1CSS 1616-2
.150 inch........
.015 inch........
.031 inch........
.062 inch........
CSS 1417-3CSS 1417-1CSS 1417-2
.015 inch........
.031 inch........
.062 inch........
Ø0.56 [14.2]TYP
3.50 [88.9]1.25 [31.8]
TYP
0.50 [12.7]
0.50 [12.7]3.25 [82.6]
4.25 [108.0]
Ø0.56 [14.2]TYP
4.00 [101.6]
1.50 [38.1]TYP
0.50 [12.7]
Ø0.56 [14.2]TYP (8)
Ø1.00 [25.4]
0.50 [12.7] 1.75 [44.5]TYP
4.50 [114.3]
4.50 [114.3]
2.25 [57.2]TYP (4)
0.50 [12.7]
1.75 [44.5]TYP (4)0.50 [12.7]
5.50 [139.7]
Ø0.56 [14.2]TYP
1.50 [38.1] TYP
0.50 [12.7]
1.50 [38.1]TYP
0.50 [12.7]
4.00 [101.6]
Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleSets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleMetric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 32
(4) .059 inch.....
Inch thickness shim........
Four piece inch shim set.........
DSCH107 Series - Shim SetsDSC Part No. Description Thickness Set includes Other part numbers
DSCH107 Series - Individual ShimsDSC Part No. Description Thickness
DSCH107-E244............
DSCH107-E059..........
.236 inch........ D113063
.059 inch
0.75 [19.1]
3.50 [88.9]5.00 [127.0]
0.75 [19.1]
1.50 [38.1]
0.56 [14.2]TYP
0.56 [14.2]TYP
1.50 [38.1]0.75 [19.1]
4.00 [101.6]
0.56 [14.2]
0.75 [19.1]
2.50 [63.5]
4.00 [101.6]0.75 [19.1]
1.50 [38.1]
0.56 [14.2] TYP
9.00 [228.6]
0.75 [19.1]
7.50 [190.5]0.75 [19.1]
1.50 [38.1]
Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scale
DSCH108 Series - Shim SetsDSC Part No. Description Thickness Set includes Other part numbers
Inch thickness shim........
Four piece inch shim set.........
DSCH108 Series - Individual ShimsDSC Part No. Description ThicknessDSCH108-E059..........
DSCH108-E244............
.059 inch
.236 inch........ (4) .059 inch..... D113064
DSCH109 Series - Shim SetsDSC Part No. Description Thickness Set includes Other part numbers
Inch thickness shim........
Four piece inch shim set.........
DSCH109 Series - Individual ShimsDSC Part No. Description ThicknessDSCH109-E059..........
DSCH109-E244............
.059 inch
.236 inch........ (4) .059 inch..... D113065
DSCH110 Series - Shim SetsDSC Part No. Description Thickness Set includes Other part numbers
Four piece inch shim set.........DSCH110-E244............ .236 inch........ (4) .059 inch..... D113066
DSCH110 Series - Individual ShimsDSC Part No. Description Thickness
Inch thickness shim........DSCH110-E059.......... .059 inch
Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleMetric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted
3.00 [76.2]
4.50 [114.3]
.75 [19.1]
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 33
DSCH111 Series ShimsDSC Part No. Thickness Other part numbersDSCH111-E005..........DSCH111-E010..........DSCH111-E015..........DSCH111-E030..........DSCH111-E060..........DSCH111-E125..........
FSD 14195-55FSD 14195-54FSD 14195-53FSD 14195-52FSD 14195-51FSD 14195-50
.005 inch........
.010 inch........
.015 inch........
.030 inch........
.060 inch........
.125 inch........
.005 inch........
.010 inch........
.015 inch........
.030 inch........
.060 inch........
.125 inch........
DSCH112 Series ShimsDSC Part No. Thickness Other part numbersDSCH112-E005..........DSCH112-E010..........DSCH112-E015..........DSCH112-E030..........DSCH112-E060..........DSCH112-E125..........
FSD 5590-55FSD 5590-54FSD 5590-53FSD 5590-52FSD 5590-51FSD 5590-50
0.10mm..........0.20mm..........0.50mm..........1.00mm..........2.00mm..........5.00mm..........
DSCH113 Series ShimsDSC Part No. Thickness Other part numbersDSCH113-M010..........DSCH113-M020..........DSCH113-M050..........DSCH113-M100..........DSCH113-M200..........DSCh113-M500..........
11-38D 336 065/611-38D 336 065/511-38D 336 065/411-38D 336 065/311-38D 336 065/211-38D 336 065/1
0.65 [16.5]TYP
1.25 [31.8]
0.70 [17.8] 1.60 [40.6]
3.00 [76.2]
0.56 [14.2]TYP
1.00 [25.4]
2.00 [50.8]
4.00 [101.6]
1.00 [25.4]
1.50 [38.1]
0.63 [15.9]
ShimsDrawings are not to scale Sets are bulk shipped Slots and holes are centered unless otherwise noted
Most spacers are etched on the side with thickness
(1) .060 inch, (2) .030 inch, (2) .015 inch
DSCH111 Series - Shim SetsDSC Part No. Description Thickness Set includes
Five piece inch shim set..........DSCH111-E155............ .150 inch........
DSCH112 Series - Shim SetsDSC Part No. Description Thickness Set includes
Five piece inch shim set..........DSCH112-E155............ .150 inch........ (1) .060 inch, (2) .030 inch, (2) .015 inch
0.10mm..........0.20mm..........0.50mm..........1.00mm..........2.00mm..........5.00mm..........
DSCH114 Series ShimsDSC Part No. Thickness Other part numbersDSCH114-M010..........DSCH114-M020..........DSCH114-M050..........DSCH114-M100..........DSCH114-M200..........DSCH114-M500..........
11-38D 336 066/611-38D 336 066/511-38D 336 066/411-38D 336 066/311-38D 336 066/211-38D 336 066/1
DSCH113 Series - Shim SetsDSC Part No. Description Thickness Set includes
Five piece metric shim set.......DSCH113-M505........... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
.59 [15.0]
2.56 [65.0]
0.39 [10.0]
.79 [20.0]
0.35 [9.0]
0.39 [10.0]
0.35 [9.0] 0.59 [15.0]
.79 [20.0]
1.97 [50.0]
0.39 [10.0]
DSCH114 Series - Shim SetsDSC Part No. Description Thickness Set includes
Five piece metric shim set.......DSCH114-M505........... (1) 2.00mm, (2) 1.00mm, (2) .50mm5.00mm..........
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 34
DSCH115 Series ShimsDSC Part No. Thickness Other part numbersDSCH115-M010..........DSCH115-M020..........DSCH115-M025..........DSCH115-M050..........DSCH115-M100..........DSCH115-M200..........DSCH115-M500..........
11-38D 495 551/6, 5 279 66511-38D 495 551/5
11-38D 495 551/4, 5 279 66611-38D 495 551/3, 5 279 66711-38D 495 551/2, 5 279 66811-38D 495 551/1
0.10MM..........0.20MM..........0.25MM0.50MM..........1.00MM..........2.00MM..........5.00MM..........
ShimsDrawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted
Most spacers are etched on the side with thickness
1.97 [50.0]
0.39 [10.0]
0.39 [10.0]
DSCH115 Series - Shim SetsDSC Part No. Description Thickness Set includes
Five piece metric shim set.......Seven piece metric shim set...
DSCH115-M505...........DSCH115-M507...........
5.00mm..........5.00mm..........
(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH116 Series ShimsDSC Part No. Thickness Other part numbersDSCH116-M010..........DSCH116-M025..........DSCH116-M050..........DSCH116-M100..........DSCH116-M200..........
3 699 426
3 699 4273 699 4283 699 429
0.10MM..........0.25MM0.50MM..........1.00MM..........2.00MM..........
DSCH116 Series - Shim SetsDSC Part No. Description Thickness Set includes
Five piece metric shim set.......Seven piece metric shim set...
DSCH116-M505...........DSCH116-M507...........
5.00mm..........5.00mm..........
(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
0.35 [9.0]
0.39 [10.0]0.79 [20.0]
0.29 [7.5]
1.77 [45.0]
DSCH117 Series ShimsDSC Part No. Thickness Other part numbersDSCH117-M010..........DSCH117-M025.........DSCH117-M050..........DSCH117-M100..........DSCH117-M200..........
3 699 430
3 699 4313 699 4323 699 433
0.10MM..........0.25MM0.50MM..........1.00MM..........2.00MM..........
DSCH117 Series - Shim SetsDSC Part No. Description Thickness Set includes
Five piece metric shim set.......Seven piece metric shim set...
DSCH117-M505...........DSCH117-M507...........
5.00mm..........5.00mm..........
(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
0.35 [9.0]
1.97 [50.0]0.59 [15.0]
0.59 [15.0]
DSCH118 Series ShimsDSC Part No. Thickness Other part numbersDSCH118-M010..........DSCH118-M025..........DSCH118-M050..........DSCH118-M100..........DSCH118-M200..........
3 699 434
3 699 4353 699 4363 699 437
0.10MM..........0.25MM0.50MM..........1.00MM..........2.00MM..........
DSCH118 Series - Shim SetsDSC Part No. Description Thickness Set includes
Five piece metric shim set.......Seven piece metric shim set...
DSCH118-M505...........DSCH118-M507...........
5.00mm..........5.00mm..........
(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
0.59 [15.0]0.35 [9.0]
0.39 [10.0]
1.18 [30.0]
0.29 [7.5]
0.79 [20.0]
0.59 [15.0]
0.39 [10.0]
2.36 [60.0]0.29 [7.5]
0.79 [20.0]
0.35 [9.0]
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 35
ShimsDrawings are not to scale Slots and holes are centered unless otherwise noted
DSCH120 Series ShimsDSC Part No. Thickness Other part numbersDSCH120-M025..........DSCH120-M050..........DSCH120-M100..........DSCH120-M200..........
TYPE 2-T025, DSC1938-51TYPE 2-T050, DSC1938-52TYPE 2-T100, DSC1938-53TYPE 2-T200, DSC1938-54
0.25MM..........0.50MM..........1.00MM..........2.00MM..........
0.41 [10.5]
0.37 [9.5]
.75 [19.0]
0.71 [18.0]
0.34 [9.0] .79 [20.0]
0.41 [10.5]
1.50 [38.0].75 [19.0]
1.89 [48.0]
.41 [10.5]
.75 [19.0]
0.34 [9.0] 0.59 [15.0]TYP
2.48 [63.0].41 [10.5]
75 [19.0]
0.34 [9.0] .59 [15.0]TYP
.37 [9.5]
0.37 [9.5]
0.37 [9.5]
DSCH119 Series ShimsDSC Part No. Thickness Other part numbersDSCH119-M025..........DSCH119-M050..........DSCH119-M100..........DSCH119-M200..........
TYPE 1-T025, DSC1918-51TYPE 1-T050, DSC1918-52TYPE 1-T100, DSC1918-53TYPE 1-T200, DSC1918-54
0.25MM..........0.50MM..........1.00MM..........2.00MM..........
DSCH121 Series ShimsDSC Part No. Thickness Other part numbersDSCH121-M025..........DSCH121-M050..........DSCH121-M100..........DSCH121-M200..........
TYPE 3-T025, DSC1948-51TYPE 3-T050, DSC1948-52TYPE 3-T100, DSC1948-53TYPE 3-T200, DSC1948-54
0.25MM..........0.50MM..........1.00MM..........2.00MM..........
DSCH122 Series ShimsDSC Part No. Thickness Other part numbersDSCH122-M025..........DSCH122-M050..........DSCH122-M100..........DSCH122-M200..........
TYPE 4-T025, DSC1963-51TYPE 4-T050, DSC1963-52TYPE 4-T100, DSC1963-53TYPE 4-T200, DSC1963-54
0.25MM..........0.50MM..........1.00MM..........2.00MM..........
DSCH119 Series - Shim SetsDSC Part No. Description Thickness Set includes
Five piece metric shim set.......Seven piece metric shim set...
DSCH119-M505...........DSCH119-M507...........
5.00mm..........5.00mm..........
(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH120 Series - Shim SetsDSC Part No. Description Thickness Set includes
Five piece metric shim set.......Seven piece metric shim set...
DSCH120-M505...........DSCH120-M507...........
5.00mm..........5.00mm..........
(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH121 Series - Shim SetsDSC Part No. Description Thickness Set includes
Five piece metric shim set.......Seven piece metric shim set...
DSCH121-M505...........DSCH121-M507...........
5.00mm..........5.00mm..........
(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH122 Series - Shim SetsDSC Part No. Description Thickness Set includes
Five piece metric shim set.......Seven piece metric shim set...
DSCH122-M505...........DSCH122-M507...........
5.00mm..........5.00mm..........
(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 36
ShimsDrawings are not to scale Slots and holes are centered unless otherwise noted
DSCH123 Series ShimsDSC Part No. Thickness Other part numbersDSCH123-M010..........DSCH123-M025..........DSCH123-M050..........DSCH123-M100..........DSCH123-M200..........
3 193 188
3 193 1893 193 1903 193 191
0.10MM..........0.25MM0.50MM..........1.00MM..........2.00MM..........
DSCH124 Series ShimsDSC Part No. Thickness Other part numbersDSCH124-M010..........DSCH124-M025..........DSCH124-M050..........DSCH124-M100..........DSCH124-M200..........
3 193 192
3 193 1933 193 1943 193 195
0.10MM..........0.25MM0.50MM..........1.00MM..........2.00MM..........
DSCH125 Series ShimsDSC Part No. Thickness Other part numbersDSCH125-M010..........DSCH125-M025..........DSCH125-M050..........DSCH125-M100..........DSCH125-M200..........
3 193 196
3 193 1973 193 1983 193 199
0.10MM..........0.25MM0.50MM..........1.00MM..........2.00MM..........
1.18 [30.0]
0.30 [7.5]
0.35 [9.0]
0.59 [15.0]
0.59 [15.0]
0.59 [15.0]
0.59 [15.0]
0.30 [7.5]
0.30 [7.5]
0.59 [15.0]
0.59 [15.0]
0.35 [9.0]
0.35 [9.0]
1.77 [45.0]
2.36 [60.0]
DSCH123 Series - Shim SetsDSC Part No. Description Thickness Set includes
Five piece metric shim set.......Seven piece metric shim set...
DSCH123-M505...........DSCH123-M507...........
5.00mm..........5.00mm..........
(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH124 Series - Shim SetsDSC Part No. Description Thickness Set includes
Five piece metric shim set.......Seven piece metric shim set...
DSCH124-M505...........DSCH124-M507...........
5.00mm..........5.00mm..........
(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH125Series - Shim SetsDSC Part No. Description Thickness Set includes
Five piece metric shim set.......Seven piece metric shim set...
DSCH125-M505...........DSCH125-M507...........
5.00mm..........5.00mm..........
(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
0.30 [7.5]
0.30 [7.5]
0.30 [7.5]
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 37
2.00mm..........2.25mm..........2.50mm..........2.75mm..........3.00mm..........3.25mm..........3.50mm..........3.75mm..........4.00mm..........4.25mm..........4.50mm..........4.75mm..........5.00mm..........5.25mm..........5.50mm..........5.75mm..........6.00mm..........
DSCP001 Series SpacersDSC Part No. Thickness Other part numbersDSCP001-M200..........DSCP001-M225..........DSCP001-M250..........DSCP001-M275..........DSCP001-M300..........DSCP001-M325..........DSCP001-M350..........DSCP001-M375..........DSCP001-M400..........DSCP001-M425..........DSCP001-M450..........DSCP001-M475..........DSCP001-M500..........DSCP001-M525..........DSCP001-M550..........DSCP001-M575..........DSCP001-M600..........
FSD 39279-64FSD 39279-65FSD 39279-66FSD 39279-67FSD 39279-51FSD 39279-52FSD 39279-53FSD 39279-54FSD 39279-55FSD 39279-56FSD 39279-57FSD 39279-58FSD 39279-59FSD 39279-60FSD 39279-61FSD 39279-62FSD 39279-63
2.00mm..........2.25mm..........2.50mm..........2.75mm..........3.00mm..........3.25mm..........3.50mm..........3.75mm..........4.00mm..........4.25mm..........4.50mm..........4.75mm..........5.00mm..........5.25mm..........5.50mm..........5.75mm..........6.00mm..........
DSCP002 Series SpacersDSC Part No. Thickness Other part numbersDSCP002-M200..........DSCP002-M225..........DSCP002-M250..........DSCP002-M275..........DSCP002-M300..........DSCP002-M325..........DSCP002-M350..........DSCP002-M375..........DSCP002-M400..........DSCP002-M425..........DSCP002-M450..........DSCP002-M475..........DSCP002-M500..........DSCP002-M525..........DSCP002-M550..........DSCP002-M575..........DSCP002-M600..........
FSD 39280-64FSD 39280-65FSD 39280-66FSD 39280-67FSD 39280-51FSD 39280-52FSD 39280-53FSD 39280-54FSD 39280-55FSD 39280-56FSD 39280-57FSD 39280-58FSD 39280-59FSD 39280-60FSD 39280-61FSD 39280-62FSD 39280-63
Ø0.44 [11.2]TYP 1.72 [43.7]
1.00 [25.4]
0.90 [22.9]0.41 [10.4]
0.75 [19.1]
1.38 [35.1]Ø0.37 [9.4]TYP
0.40 [10.2] 0.58 [14.7]
SPACERSDrawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted
Most spacers are etched on the side with thickness
Not black oxided
Not black oxided
Fiber Optic Laser CuttingDouglas Stamping Company uses a 2 kilowatt diode pumped fiber optic laser cutting systemin addition to our traditional dies and presses. For longer running jobs and those requiringbending and drawing, hard-tooled dies are still the most economical way to produce a widevariety of products. For shorter runs and hard or unusual materials, laser cutting offersgreater flexibility and much quicker turn-around.
This state-of-the-art system combines extreme reliability with lower overhead than traditionallaser systems, allowing us to quickly and accurately produce shims, spacers, washers, rings,gaskets and other specialty and custom items. We can cleanly and accurately cut most anymetal with this system, including copper, brass and titanium.
We are pleased to quote to your drawings. Please send inquiries to us by email [email protected], FAX at 248 542-3287, or call 542-3940 to discuss yourrequirements.
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 38
2.00mm..........2.25mm..........2.50mm..........2.75mm..........3.00mm..........3.25mm..........3.50mm..........3.75mm..........4.00mm..........4.25mm..........4.50mm..........4.75mm..........5.00mm..........5.25mm..........5.50mm..........5.75mm..........6.00mm..........
DSCP006 Series SpacersDSC Part No. Thickness Other part numbersDSCP006-M200..........DSCP006-M225..........DSCP006-M250..........DSCP006-M275..........DSCP006-M300..........DSCP006-M325..........DSCP006-M350..........DSCP006-M375..........DSCP006-M400..........DSCP006-M425..........DSCP006-M450..........DSCP006-M475..........DSCP006-M500..........DSCP006-M525..........DSCP006-M550..........DSCP006-M575..........DSCP006-M600..........
FSD 40223-51FSD 40223-52FSD 40223-53FSD 40223-54FSD 40223-55FSD 40223-56FSD 40223-57FSD 40223-58FSD 40223-59FSD 40223-60FSD 40223-61FSD 40223-62FSD 40223-63FSD 40223-64FSD 40223-65FSD 40223-66FSD 40223-67
DSCP003 Series SpacersDSC Part No. Thickness Other part numbers
2.00mm..........2.25mm..........2.50mm..........2.75mm..........3.00mm..........3.25mm..........3.50mm..........3.75mm..........4.00mm..........4.25mm..........4.50mm..........4.75mm..........5.00mm..........5.25mm..........5.50mm..........5.75mm..........6.00mm..........
DSCP003-M200..........DSCP003-M225..........DSCP003-M250..........DSCP003-M275..........DSCP003-M300..........DSCP003-M325..........DSCP003-M350..........DSCP003-M375..........DSCP003-M400..........DSCP003-M425..........DSCP003-M450..........DSCP003-M475..........DSCP003-M500..........DSCP003-M525..........DSCP003-M550..........DSCP003-M575..........DSCP003-M600..........
FSD 39281-64FSD 39281-65FSD 39281-66FSD 39281-67FSD 39281-51FSD 39281-52FSD 39281-53FSD 39281-54FSD 39281-55FSD 39281-56FSD 39281-57FSD 39281-58FSD 39281-59FSD 39281-60FSD 39281-61FSD 39281-62FSD 39281-63
DSCP004 Series SpacersDSC Part No. Thickness Other part numbers
2.00mm..........2.25mm..........2.50mm..........2.75mm..........3.00mm..........3.25mm..........3.50mm..........3.75mm..........4.00mm..........4.25mm..........4.50mm..........4.75mm..........5.00mm..........5.25mm..........5.50mm..........5.75mm..........6.00mm..........
DSCP004-M200..........DSCP004-M225..........DSCP004-M250..........DSCP004-M275..........DSCP004-M300..........DSCP004-M325..........DSCP004-M350..........DSCP004-M375..........DSCP004-M400..........DSCP004-M425..........DSCP004-M450..........DSCP004-M475..........DSCP004-M500..........DSCP004-M525..........DSCP004-M550..........DSCP004-M575..........DSCP004-M600..........
FSD 40221-51FSD 40221-52FSD 40221-53FSD 40221-54FSD 40221-55FSD 40221-56FSD 40221-57FSD 40221-58FSD 40221-59FSD 40221-60FSD 40221-61FSD 40221-62FSD 40221-63FSD 40221-64FSD 40221-65FSD 40221-66FSD 40221-67
DSCP005 Series SpacersDSC Part No. Thickness Other part numbers
2.00mm..........2.25mm..........2.50mm..........2.75mm..........3.00mm..........3.25mm..........3.50mm..........3.75mm..........4.00mm..........4.25mm..........4.50mm..........4.75mm..........5.00mm..........5.25mm..........5.50mm..........5.75mm..........6.00mm..........
DSCP005-M200..........DSCP005-M225..........DSCP005-M250..........DSCP005-M275..........DSCP005-M300..........DSCP005-M325..........DSCP005-M350..........DSCP005-M375..........DSCP005-M400..........DSCP005-M425..........DSCP005-M450..........DSCP005-M475..........DSCP005-M500..........DSCP005-M525..........DSCP005-M550..........DSCP005-M575..........DSCP005-M600..........
FSD 40222-51FSD 40222-52FSD 40222-53FSD 40222-54FSD 40222-55FSD 40222-56FSD 40222-57FSD 40222-58FSD 40222-59FSD 40222-60FSD 40222-61FSD 40222-62FSD 40222-63FSD 40222-64FSD 40222-65FSD 40222-66FSD 40222-67
Ø0.44 [11.2]TYP 2.50 [63.5]
1.00 [25.4]
0.81 [20.6]TYP
0.44 [11.2]
Ø0.41 [11.2]
0.88 [22.2]
1.00 [25.4]
Ø0.41 [10.4]TYP
0.88 [22.2]0.44 [11.2]
1.75 [44.5]
0.88 [22.4]
Ø0.41 [10.4]TYP 2.00 [50.8]
0.44 [11.2] 1.13 [28.6]
0.88 [22.4]
Not black oxided
SPACERSDrawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted
Most spacers are etched on the side with thickness
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 39
2.00mm..........2.25mm..........2.50mm..........2.75mm..........3.00mm..........3.25mm..........3.50mm..........3.75mm..........4.00mm..........4.25mm..........4.50mm..........4.75mm..........5.00mm..........5.25mm..........5.50mm..........5.75mm..........6.00mm..........
DSCP010 Series SpacersDSC Part No. Thickness Other part numbersDSCP010-M200..........DSCP010-M225..........DSCP010-M250..........DSCP010-M275..........DSCP010-M300..........DSCP010-M325..........DSCP010-M350..........DSCP010-M375..........DSCP010-M400..........DSCP010-M425..........DSCP010-M450..........DSCP010-M475..........DSCP010-M500..........DSCP010-M525..........DSCP010-M550..........DSCP010-M575..........DSCP010-M600..........
FSD 40227-51FSD 40227-52FSD 40227-53FSD 40227-54FSD 40227-55FSD 40227-56FSD 40227-57FSD 40227-58FSD 40227-59FSD 40227-60FSD 40227-61FSD 40227-62FSD 40227-63FSD 40227-64FSD 40227-65FSD 40227-66FSD 40227-67
DSCP007 Series SpacersDSC Part No. Thickness Other part numbers
2.00mm..........2.25mm..........2.50mm..........2.75mm..........3.00mm..........3.25mm..........3.50mm..........3.75mm..........4.00mm..........4.25mm..........4.50mm..........4.75mm..........5.00mm..........5.25mm..........5.50mm..........5.75mm..........6.00mm..........
DSCP007-M200..........DSCP007-M225..........DSCP007-M250..........DSCP007-M275..........DSCP007-M300..........DSCP007-M325..........DSCP007-M350..........DSCP007-M375..........DSCP007-M400..........DSCP007-M425..........DSCP007-M450..........DSCP007-M475..........DSCP007-M500..........DSCP007-M525..........DSCP007-M550..........DSCP007-M575..........DSCP007-M600..........
FSD 40224-51FSD 40224-52FSD 40224-53FSD 40224-54FSD 40224-55FSD 40224-56FSD 40224-57FSD 40224-58FSD 40224-59FSD 40224-60FSD 40224-61FSD 40224-62FSD 40224-63FSD 40224-64FSD 40224-65FSD 40224-66FSD 40224-67
DSCP008 Series SpacersDSC Part No. Thickness Other part numbers
2.00mm..........2.25mm..........2.50mm..........2.75mm..........3.00mm..........3.25mm..........3.50mm..........3.75mm..........4.00mm..........4.25mm..........4.50mm..........4.75mm..........5.00mm..........5.25mm..........5.50mm..........5.75mm..........6.00mm..........
DSCP008-M200..........DSCP008-M225..........DSCP008-M250..........DSCP008-M275..........DSCP008-M300..........DSCP008-M325..........DSCP008-M350..........DSCP008-M375..........DSCP008-M400..........DSCP008-M425..........DSCP008-M450..........DSCP008-M475..........DSCP008-M500..........DSCP008-M525..........DSCP008-M550..........DSCP008-M575..........DSCP008-M600..........
FSD 40225-51FSD 40225-52FSD 40225-53FSD 40225-54FSD 40225-55FSD 40225-56FSD 40225-57FSD 40225-58FSD 40225-59FSD 40225-60FSD 40225-61FSD 40225-62FSD 40225-63FSD 40225-64FSD 40225-65FSD 40225-66FSD 40225-67
DSCP009 Series SpacersDSC Part No. Thickness Other part numbers
2.00mm..........2.25mm..........2.50mm..........2.75mm..........3.00mm..........3.25mm..........3.50mm..........3.75mm..........4.00mm..........4.25mm..........4.50mm..........4.75mm..........5.00mm..........5.25mm..........5.50mm..........5.75mm..........6.00mm..........
DSCP009-M200..........DSCP009-M225..........DSCP009-M250..........DSCP009-M275..........DSCP009-M300..........DSCP009-M325..........DSCP009-M350..........DSCP009-M375..........DSCP009-M400..........DSCP009-M425..........DSCP009-M450..........DSCP009-M475..........DSCP009-M500..........DSCP009-M525..........DSCP009-M550..........DSCP009-M575..........DSCP009-M600..........
FSD 40226-51FSD 40226-52FSD 40226-53FSD 40226-54FSD 40226-55FSD 40226-56FSD 40226-57FSD 40226-58FSD 40226-59FSD 40226-60FSD 40226-61FSD 40226-62FSD 40226-63FSD 40226-64FSD 40226-65FSD 40226-66FSD 40226-67
Ø0.41 [10.4]TYP
0.88 [22.4]
2.25 [57.2]
0.44 [11.2] 0.69 [17.5]TYP
Ø0.41 [10.4]TYP
2.50 [63.5]
0.88 [22.4]
0.81 [20.6]TYP
0.44 [11.2]
Ø0.41 [10.4]TYP
0.88 [22.4]
3.00 [76.2]
0.44 [11.2] 1.06 [27.0]TYP
0.42 [10.7] 0.88 [22.2]TYP
0.88 [22.4]
3.50 [88.9]
Ø0.41 [10.4]TYP
SPACERSDrawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted
Most spacers are etched on the side with thickness
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 40
2.00mm..........2.25mm..........2.50mm..........2.75mm..........3.00mm..........3.25mm..........3.50mm..........3.75mm..........4.00mm..........4.25mm..........4.50mm..........4.75mm..........5.00mm..........5.25mm..........5.50mm..........5.75mm..........6.00mm..........
DSCP014 Series SpacersDSC Part No. Thickness Other part numbersDSCP014-M200..........DSCP014-M225..........DSCP014-M250..........DSCP014-M275..........DSCP014-M300..........DSCP014-M325..........DSCP014-M350..........DSCP014-M375..........DSCP014-M400..........DSCP014-M425..........DSCP014-M450..........DSCP014-M475..........DSCP014-M500..........DSCP014-M525..........DSCP014-M550..........DSCP014-M575..........DSCP014-M600..........
FSD 40231-51FSD 40231-52FSD 40231-53FSD 40231-54FSD 40231-55FSD 40231-56FSD 40231-57FSD 40231-58FSD 40231-59FSD 40231-60FSD 40231-61FSD 40231-62FSD 40231-63FSD 40231-64FSD 40231-65FSD 40231-66FSD 40231-67
DSCP011 Series SpacersDSC Part No. Thickness Other part numbers
2.00mm..........2.25mm..........2.50mm..........2.75mm..........3.00mm..........3.25mm..........3.50mm..........3.75mm..........4.00mm..........4.25mm..........4.50mm..........4.75mm..........5.00mm..........5.25mm..........5.50mm..........5.75mm..........6.00mm..........
DSCP011-M200..........DSCP011-M225..........DSCP011-M250..........DSCP011-M275..........DSCP011-M300..........DSCP011-M325..........DSCP011-M350..........DSCP011-M375..........DSCP011-M400..........DSCP011-M425..........DSCP011-M450..........DSCP011-M475..........DSCP011-M500..........DSCP011-M525..........DSCP011-M550..........DSCP011-M575..........DSCP011-M600..........
FSD 40228-51FSD 40228-52FSD 40228-53FSD 40228-54FSD 40228-55FSD 40228-56FSD 40228-57FSD 40228-58FSD 40228-59FSD 40228-60FSD 40228-61FSD 40228-62FSD 40228-63FSD 40228-64FSD 40228-65FSD 40228-66FSD 40228-67
DSCP012 Series SpacersDSC Part No. Thickness Other part numbers
2.00mm..........2.25mm..........2.50mm..........2.75mm..........3.00mm..........3.25mm..........3.50mm..........3.75mm..........4.00mm..........4.25mm..........4.50mm..........4.75mm..........5.00mm..........5.25mm..........5.50mm..........5.75mm..........6.00mm..........
DSCP012-M200..........DSCP012-M225..........DSCP012-M250..........DSCP012-M275..........DSCP012-M300..........DSCP012-M325..........DSCP012-M350..........DSCP012-M375..........DSCP012-M400..........DSCP012-M425..........DSCP012-M450..........DSCP012-M475..........DSCP012-M500..........DSCP012-M525..........DSCP012-M550..........DSCP012-M575..........DSCP012-M600..........
FSD 40229-51FSD 40229-52FSD 40229-53FSD 40229-54FSD 40229-55FSD 40229-56FSD 40229-57FSD 40229-58FSD 40229-59FSD 40229-60FSD 40229-61FSD 40229-62FSD 40229-63FSD 40229-64FSD 40229-65FSD 40229-66FSD 40229-67
DSCP013 Series SpacersDSC Part No. Thickness Other part numbers
2.00mm..........2.25mm..........2.50mm..........2.75mm..........3.00mm..........3.25mm..........3.50mm..........3.75mm..........4.00mm..........4.25mm..........4.50mm..........4.75mm..........5.00mm..........5.25mm..........5.50mm..........5.75mm..........6.00mm..........
DSCP013-M200..........DSCP013-M225..........DSCP013-M250..........DSCP013-M275..........DSCP013-M300..........DSCP013-M325..........DSCP013-M350..........DSCP013-M375..........DSCP013-M400..........DSCP013-M425..........DSCP013-M450..........DSCP013-M475..........DSCP013-M500..........DSCP013-M525..........DSCP013-M550..........DSCP013-M575..........DSCP013-M600..........
FSD 40230-51FSD 40230-52FSD 40230-53FSD 40230-54FSD 40230-55FSD 40230-56FSD 40230-57FSD 40230-58FSD 40230-59FSD 40230-60FSD 40230-61FSD 40230-62FSD 40230-63FSD 40230-64FSD 40230-65FSD 40230-66FSD 40230-67
Ø0.44 [11.2]TYP
0.88 [22.4]
0.50 [12.7] 1.00 [25.4]TYP
4.00 [101.6]
Ø0.41 [10.4]
.16R TYP
0.74 [18.8]
0.98 [24.9]
1.26 [32.0]0.63 [16.0]
0.49 [12.4]
1.48 [37.6]
0.37 [9.4]
Ø0.41 [10.4]
1.12 [28.4]0.40 [10.2] TYP
0.64 [16.3]0.32 [8.1]
0.56 [14.2]2.00 [50.8]
1.00 [25.4]
1.25 [31.8]
Ø0.41 [10.4]
1.62 [41.1]0.40 [10.2] TYP
0.32 [8.1]0.64 [16.3]
0.81 [20.6]
2.50 [63.5]
1.25 [31.8]
1.25 [31.8]
SPACERSDrawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted
Most spacers are etched on the side with thickness
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 41
DSCP015 Series SpacersDSC Part No. Thickness Other part #s
3.00mm..........3.20mm..........3.40mm..........3.60mm..........3.80mm..........4.00mm..........4.20mm..........4.40mm..........4.60mm..........4.80mm..........5.00mm..........5.20mm..........5.40mm..........5.60mm..........5.80mm..........6.00mm..........6.20mm..........
DSCP015-M300..........DSCP015-M320..........DSCP015-M340..........DSCP015-M360..........DSCP015-M380..........DSCP015-M400..........DSCP015-M420..........DSCP015-M440..........DSCP015-M460..........DSCP015-M480..........DSCP015-M500..........DSCP015-M520..........DSCP015-M540..........DSCP015-M560..........DSCP015-M580..........DSCP015-M600..........DSCP015-M620..........
ASP330SASP332SASP334SASP336SASP338SASP340SASP342SASP344SASP346SASP348SASP350SASP352SASP354SASP356SASP358SASP360SASP362S
DSC Part No. Thickness Other part #s6.40mm..........6.60mm..........6.80mm..........7.00mm..........
DSCP015-M640..........DSCP015-M660..........DSCP015-M680..........DSCP015-M700..........
ASP364SASP366SASP368SASP370S
DSC Part No. Thickness Other part #s
3.00mm..........3.20mm..........3.40mm..........3.60mm..........3.80mm..........4.00mm..........4.20mm..........4.40mm..........4.60mm..........4.80mm..........5.00mm..........5.20mm..........5.40mm..........5.60mm..........5.80mm..........6.00mm..........6.20mm..........
DSCP016 Series SpacersDSC Part No. Thickness Other part #sDSCP016-M300..........DSCP016-M320..........DSCP016-M340..........DSCP016-M360..........DSCP016-M380..........DSCP016-M400..........DSCP016-M420..........DSCP016-M440..........DSCP016-M460..........DSCP016-M480..........DSCP016-M500..........DSCP016-M520..........DSCP016-M540..........DSCP016-M560..........DSCP016-M580..........DSCP016-M600..........DSCP016-M620..........
ASP430SASP432SASP434SASP436SASP438SASP440SASP442SASP444SASP446SASP448SASP450SASP452SASP454SASP456SASP458SASP460SASP462S
DSCP016-M640..........DSCP016-M660..........DSCP016-M680..........DSCP016-M700..........
6.40mm..........6.60mm..........6.80mm..........7.00mm..........
ASP464SASP466SASP468SASP470S
0.79 [20.0]
DSC Part No. Thickness Other part #sDSCP017-M640..........DSCP017-M660..........DSCP017-M680..........DSCP017-M700..........
6.40mm..........6.60mm..........6.80mm..........7.00mm..........
ASP664SASP666SASP668SASP670S
DSCP017 Series SpacersDSC Part No. Thickness Other part #s
3.00mm..........3.20mm..........3.40mm..........3.60mm..........3.80mm..........4.00mm..........4.20mm..........4.40mm..........4.60mm..........4.80mm..........5.00mm..........5.20mm..........5.40mm..........5.60mm..........5.80mm..........6.00mm..........6.20mm..........
DSCP017-M300..........DSCP017-M320..........DSCP017-M340..........DSCP017-M360..........DSCP017-M380..........DSCP017-M400..........DSCP017-M420..........DSCP017-M440..........DSCP017-M460..........DSCP017-M480..........DSCP017-M500..........DSCP017-M520..........DSCP017-M540..........DSCP017-M560..........DSCP017-M580..........DSCP017-M600..........DSCP017-M620..........
ASP630SASP632SASP634SASP636SASP638SASP640SASP642SASP644SASP646SASP648SASP650SASP652SASP654SASP656SASP658SASP660SASP662S
DSC Part No. Thickness Other part #sDSCP018-M575..........DSCP018-M600..........
5.75mm..........6.00mm..........
FSD 40774-66FSD 40774-67
DSCP018 Series SpacersDSC Part No. Thickness Other part #s
0.50mm..........1.00mm..........2.00mm..........2.25mm..........2.50mm..........2.75mm..........3.00mm..........3.25mm..........3.50mm..........3.75mm..........4.00mm..........4.25mm..........4.50mm..........4.75mm..........5.00mm..........5.25mm..........5.50mm..........
DSCP018-M050..........DSCP018-M100..........DSCP018-M200..........DSCP018-M225..........DSCP018-M250..........DSCP018-M275..........DSCP018-M300..........DSCP018-M325..........DSCP018-M350..........DSCP018-M375..........DSCP018-M400..........DSCP018-M425..........DSCP018-M450..........DSCP018-M475..........DSCP018-M500..........DSCP018-M525..........DSCP018-M550..........
FSD 40774-45FSD 40774-47FSD 40774-51FSD 40774-52FSD 40774-53FSD 40774-54FSD 40774-55FSD 40774-56FSD 40774-57FSD 40774-58FSD 40774-59FSD 40774-60FSD 40774-61FSD 40774-62FSD 40774-63FSD 40774-64FSD 40774-65
0.28 [7.0]
2.13 [54.0]
0.34 [8.7] TYP
0.49 [12.5]
0.44 [11.1]
0.87 [22.2]
0.25 [6.5]
1.34 [34.0]
0.35 [9.0]
0.79 [20.0]0.28 [7.0]
0.79 [20.0]
1.73 [44.0]
0.35 [9.0]
1.18 [30.0]0.28 [7.0]
1.42 [36.0]
1.57 [40.0]
0.31 [8.0] 0.79 [20.0]
0.35 [9.0] TYP
1.00 [25.4]
SPACERSDrawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted
Most spacers are etched on the side with thickness
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 42
FSD 40776-66FSD 40776-67
DSC Part No. Thickness Other part #s
0.50mm..........1.00mm..........2.00mm..........2.25mm..........2.50mm..........2.75mm..........3.00mm..........3.25mm..........3.50mm..........3.75mm..........4.00mm..........4.25mm..........4.50mm..........4.75mm..........5.00mm..........5.25mm..........5.50mm..........
DSCP020 Series SpacersDSC Part No. Thickness Other part #sDSCP020-M050..........DSCP020-M100..........DSCP020-M200..........DSCP020-M225..........DSCP020-M250..........DSCP020-M275..........DSCP020-M300..........DSCP020-M325..........DSCP020-M350..........DSCP020-M375..........DSCP020-M400..........DSCP020-M425..........DSCP020-M450..........DSCP020-M475..........DSCP020-M500..........DSCP020-M525..........DSCP020-M550..........
FSD 40776-45FSD 40776-47FSD 40776-51FSD 40776-52FSD 40776-53FSD 40776-54FSD 40776-55FSD 40776-56FSD 40776-57FSD 40776-58FSD 40776-59FSD 40776-60FSD 40776-61FSD 40776-62FSD 40776-63FSD 40776-64FSD 40776-65
DSCP020-M575..........DSCP020-M600..........
5.75mm..........6.00mm..........
DSC Part No. Thickness Other part #s
FSD 40775-66FSD 40775-67
DSCP019 Series SpacersDSC Part No. Thickness Other part #s
0.50mm..........1.00mm..........2.00mm..........2.25mm..........2.50mm..........2.75mm..........3.00mm..........3.25mm..........3.50mm..........3.75mm..........4.00mm..........4.25mm..........4.50mm..........4.75mm..........5.00mm..........5.25mm..........5.50mm..........
DSCP019-M050..........DSCP019-M100..........DSCP019-M200..........DSCP019-M225..........DSCP019-M250..........DSCP019-M275..........DSCP019-M300..........DSCP019-M325..........DSCP019-M350..........DSCP019-M375..........DSCP019-M400..........DSCP019-M425..........DSCP019-M450..........DSCP019-M475..........DSCP019-M500..........DSCP019-M525..........DSCP019-M550..........
DSCP019-M575..........DSCP019-M600..........
FSD 40775-45FSD 40775-47FSD 40775-51FSD 40775-52FSD 40775-53FSD 40775-54FSD 40775-55FSD 40775-56FSD 40775-57FSD 40775-58FSD 40775-59FSD 40775-60FSD 40775-61FSD 40775-62FSD 40775-63FSD 40775-64FSD 40775-65
5.75mm..........6.00mm..........
DSCP021 Series SpacersDSC Part No. Thickness Other part numbers
2.00mm..........2.25mm..........2.50mm..........2.75mm..........3.00mm..........3.25mm..........3.50mm..........3.75mm..........4.00mm..........4.25mm..........4.50mm..........4.75mm..........5.00mm..........5.25mm..........5.50mm..........5.75mm..........6.00mm..........
DSCP021-M200..........DSCP021-M225..........DSCP021-M250..........DSCP021-M275..........DSCP021-M300..........DSCP021-M325..........DSCP021-M350..........DSCP021-M375..........DSCP021-M400..........DSCP021-M425..........DSCP021-M450..........DSCP021-M475..........DSCP021-M500..........DSCP021-M525..........DSCP021-M550..........DSCP021-M575..........DSCP021-M600..........
FSD 40873-01FSD 40873-02FSD 40873-03FSD 40873-04FSD 40873-05FSD 40873-06FSD 40873-07FSD 40873-08FSD 40873-09FSD 40873-10FSD 40873-11FSD 40873-12FSD 40873-13FSD 40873-14FSD 40873-15FSD 40873-16FSD 40873-17
2.00mm..........2.25mm..........2.50mm..........2.75mm..........3.00mm..........3.25mm..........3.50mm..........3.75mm..........4.00mm..........4.25mm..........4.50mm..........4.75mm..........5.00mm..........5.25mm..........5.50mm..........5.75mm..........6.00mm..........
DSCP022 Series SpacersDSC Part No. Thickness Other part numbersDSCP022-M200..........DSCP022-M225..........DSCP022-M250..........DSCP022-M275..........DSCP022-M300..........DSCP022-M325..........DSCP022-M350..........DSCP022-M375..........DSCP022-M400..........DSCP022-M425..........DSCP022-M450..........DSCP022-M475..........DSCP022-M500..........DSCP022-M525..........DSCP022-M550..........DSCP022-M575..........DSCP022-M600..........
FSD 40874-01FSD 40874-02FSD 40874-03FSD 40874-04FSD 40874-05FSD 40874-06FSD 40874-07FSD 40874-08FSD 40874-09FSD 40874-10FSD 40874-11FSD 40874-12FSD 40874-13FSD 40874-14FSD 40874-15FSD 40874-16FSD 40874-17
Ø.34 [8.7]
Ø.34 [8.7]TYP
Ø0.44 [11.2]
1.00 [25.4]
1.00 [25.4]
1.00 [25.4]
Ø0.44 [11.2]TYP 1.50 [38.1]
0.63 [15.9]0.44 [11.2]
0.50 [12.6]0.99 [25.2]
0.87 [22.2]
0.44 [11.1]
1.50 [38.1]0.75 [19.1]
0.34 [8.7] TYP
0.87 [22.2]
0.55 [14.0]TYP
0.45 [11.4]
2.00 [50.8]
SPACERSDrawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted
Most spacers are etched on the side with thickness
2013
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 43
DSCP024 Series SpacersDSC Part No. Thickness Other part numbers
2.00mm..........2.25mm..........2.50mm..........2.75mm..........3.00mm..........3.25mm..........3.50mm..........3.75mm..........4.00mm..........4.25mm..........4.50mm..........4.75mm..........5.00mm..........5.25mm..........5.50mm..........5.75mm..........6.00mm..........
2.00mm..........2.25mm..........2.50mm..........2.75mm..........3.00mm..........3.25mm..........3.50mm..........3.75mm..........4.00mm..........4.25mm..........4.50mm..........4.75mm..........5.00mm..........5.25mm..........5.50mm..........5.75mm..........6.00mm..........
DSCP023 Series SpacersDSC Part No. Thickness Other part numbers
DSCP024-M200..........DSCP024-M225..........DSCP024-M250..........DSCP024-M275..........DSCP024-M300..........DSCP024-M325..........DSCP024-M350..........DSCP024-M375..........DSCP024-M400..........DSCP024-M425..........DSCP024-M450..........DSCP024-M475..........DSCP024-M500..........DSCP024-M525..........DSCP024-M550..........DSCP024-M575..........DSCP024-M600..........
DSCP023-M200..........DSCP023-M225..........DSCP023-M250..........DSCP023-M275..........DSCP023-M300..........DSCP023-M325..........DSCP023-M350..........DSCP023-M375..........DSCP023-M400..........DSCP023-M425..........DSCP023-M450..........DSCP023-M475..........DSCP023-M500..........DSCP023-M525..........DSCP023-M550..........DSCP023-M575..........DSCP023-M600..........
FSD 40876-01FSD 40876-02FSD 40876-03FSD 40876-04FSD 40876-05FSD 40876-06FSD 40876-07FSD 40876-08FSD 40876-09FSD 40876-10FSD 40876-11FSD 40876-12FSD 40876-13FSD 40876-14FSD 40876-15FSD 40876-16FSD 40876-17
FSD 40875-01FSD 40875-02FSD 40875-03FSD 40875-04FSD 40875-05FSD 40875-06FSD 40875-07FSD 40875-08FSD 40875-09FSD 40875-10FSD 40875-11FSD 40875-12FSD 40875-13FSD 40875-14FSD 40875-15FSD 40875-16FSD 40875-17
DSCP026 Series SpacersDSC Part No. Thickness Other part numbers
0.25mm..........0.50mm..........1.00mm..........2.00mm..........3.00mm..........4.00mm..........5.00mm..........
2.00mm..........2.25mm..........2.50mm..........2.75mm..........3.00mm..........3.25mm..........3.50mm..........3.75mm..........4.00mm..........4.25mm..........4.50mm..........4.75mm..........5.00mm..........5.25mm..........5.50mm..........5.75mm..........6.00mm..........
DSCP025 Series SpacersDSC Part No. Thickness Other part numbers
DSCP026-M025..........DSCP026-M050..........DSCP026-M100..........DSCP026-M200..........DSCP026-M300..........DSCP026-M400..........DSCP026-M500..........
DSCP025-M200..........DSCP025-M225..........DSCP025-M250..........DSCP025-M275..........DSCP025-M300..........DSCP025-M325..........DSCP025-M350..........DSCP025-M375..........DSCP025-M400..........DSCP025-M425..........DSCP025-M450..........DSCP025-M475..........DSCP025-M500..........DSCP025-M525..........DSCP025-M550..........DSCP025-M575..........DSCP025-M600..........
FSD 41194-51FSD 41194-52FSD 41194-53FSD 41194-54FSD 41194-55FSD 41194-56FSD 41194-57
FSD 40877-01FSD 40877-02FSD 40877-03FSD 40877-04FSD 40877-05FSD 40877-06FSD 40877-07FSD 40877-08FSD 40877-09FSD 40877-10FSD 40877-11FSD 40877-12FSD 40877-13FSD 40877-14FSD 40877-15FSD 40877-16FSD 40877-17
Ø0.44 [11.2]TYP
1.00 [25.4]
2.13 [54.0]
0.44 [11.2] 0.63 [15.9]TYP
Ø0.44 [11.2]TYP
0.44 [11.2] 0.63 [15.9]TYP
2.75 [69.9]
1.00 [25.4]
Ø0.44 [11.2]TYP
1.00 [25.4]
0.63 [15.9]TYP
3.50 [88.9]
1.19 [30.2]
Ø0.34 [8.6]
0.68 [17.1]
0.68 [17.1]
SPACERSDrawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted
Most spacers are etched on the side with thickness
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 44
0.50mm..........1.00mm..........1.50mm..........2.00mm..........2.50mm..........3.00mm..........3.50mm..........4.00mm..........4.50mm..........5.00mm..........5.50mm..........6.00mm..........6.50mm..........7.00mm..........7.50mm..........8.00mm..........
DSCP028 Series SpacersDSC Part No. Thickness Other part numbersDSCP028-M050..........DSCP028-M100..........DSCP028-M150..........DSCP028-M200..........DSCP028-M250..........DSCP028-M300..........DSCP028-M350..........DSCP028-M400..........DSCP028-M450..........DSCP028-M500..........DSCP028-M550..........DSCP028-M600..........DSCP028-M650..........DSCP028-M700..........DSCP028-M750..........DSCP028-M800..........
41-502-1901, SAS 32740-0541-502-1902, SAS 32740-1041-502-1903, SAS 32740-1541-502-1904, SAS 32740-2041-502-1905, SAS 32740-2541-502-1906, SAS 32740-3041-502-1907, SAS 32740-3541-502-1908, SAS 32740-4041-502-1909, SAS 32740-4541-502-1910, SAS 32740-5041-502-1911, SAS 32740-5541-502-1912, SAS 32740-6041-502-1913, SAS 32740-6541-502-1914, SAS 32740-7041-502-1915, SAS 32740-7541-502-1916, SAS 32740-80
DSCP027 Series SpacersDSC Part No. Thickness Other part numbers
0.25mm..........0.50mm..........1.00mm..........2.00mm..........3.00mm..........4.00mm..........5.00mm..........
DSCP027-M025..........DSCP027-M050..........DSCP027-M100..........DSCP027-M200..........DSCP027-M300..........DSCP027-M400..........DSCP027-M500..........
FSD 41238-51FSD 41238-52FSD 41238-53FSD 41238-54FSD 41238-55FSD 41238-56FSD 41238-57
0.50mm..........1.00mm..........1.50mm..........2.00mm..........2.50mm..........3.00mm..........3.50mm..........4.00mm..........4.50mm..........5.00mm..........5.50mm..........6.00mm..........6.50mm..........7.00mm..........7.50mm..........8.00mm..........
DSCP029 Series SpacersDSC Part No. Thickness Other part numbersDSCP029-M050..........DSCP029-M100..........DSCP029-M150..........DSCP029-M200..........DSCP029-M250..........DSCP029-M300..........DSCP029-M350..........DSCP029-M400..........DSCP029-M450..........DSCP029-M500..........DSCP029-M550..........DSCP029-M600..........DSCP029-M650..........DSCP029-M700..........DSCP029-M750..........DSCP029-M800..........
41-502-1921, SAS 42751-0541-502-1922, SAS 42751-1041-502-1923, SAS 42751-1541-502-1924, SAS 42751-2041-502-1925, SAS 42751-2541-502-1926, SAS 42751-3041-502-1927, SAS 42751-3541-502-1928, SAS 42751-4041-502-1929, SAS 42751-4541-502-1930, SAS 42751-5041-502-1931, SAS 42751-5541-502-1932, SAS 42751-6041-502-1933, SAS 42751-6541-502-1934, SAS 42751-7041-502-1935, SAS 42751-7541-502-1936, SAS 42751-80
DSCP030 Series SpacersDSC Part No. Thickness Other part numbers
0.50mm..........1.00mm..........1.50mm..........2.00mm..........2.50mm..........3.00mm..........3.50mm..........4.00mm..........4.50mm..........5.00mm..........5.50mm..........6.00mm..........6.50mm..........7.00mm..........7.50mm..........8.00mm..........
DSCP030-M050..........DSCP030-M100..........DSCP030-M150..........DSCP030-M200..........DSCP030-M250..........DSCP030-M300..........DSCP030-M350..........DSCP030-M400..........DSCP030-M450..........DSCP030-M500..........DSCP030-M550..........DSCP030-M600..........DSCP030-M650..........DSCP030-M700..........DSCP030-M750..........DSCP030-M800..........
41-502-1941, SAS 33840-0541-502-1942, SAS 33840-1041-502-1943, SAS 33840-1541-502-1944, SAS 33840-2041-502-1945, SAS 33840-2541-502-1946, SAS 33840-3041-502-1947, SAS 33840-3541-502-1948, SAS 33840-4041-502-1949, SAS 33840-4541-502-1950, SAS 33840-5041-502-1951, SAS 33840-5541-502-1952, SAS 33840-6041-502-1953, SAS 33840-6541-502-1954, SAS 33840-7041-502-1955, SAS 33840-7541-502-1956, SAS 33840-80
0.34 [8.6]
0.68 [17.1]
0.68 [17.1]
1.63 [41.3]0.39 [9.9] TYP
Ø0.34 [8.6]TYP
0.13 [3.2] TYP
1.06 [26.9]
0.49 [12.4]
0.45 [11.5]TYP
0.42 [10.7]
Ø0.34 [8.6]TYP 2.00 [50.8]
1.06 [26.9]0.49 [12.4]
0.45 [11.5]TYP
0.34 [8.7]
Ø0.34 [8.6]TYP
1.63 [41.3]
1.50 [38.1]
0.49 [12.4]
0.45 [11.5]TYP
0.42 [10.7]
0.34 [8.7]
SPACERSDrawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted
Most spacers are etched on the side with thickness
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 45
DSCP032 Series SpacersDSC Part No. Thickness Other part numbers
0.50mm..........1.00mm..........1.50mm..........2.00mm..........4.50mm..........
DSCP032-M050..........DSCP032-M100..........DSCP032-M150..........DSCP032-M200..........DSCP032-M450..........
FS 21-09-0105FS 21-09-0110FS 21-09-0115FS 21-09-0120FS 21-09-0145
DSCP031 Series SpacersDSC Part No. Thickness Other part numbers
0.50mm..........1.00mm..........1.50mm..........2.00mm..........2.50mm..........3.00mm..........3.50mm..........4.00mm..........4.50mm..........5.00mm..........5.50mm..........6.00mm..........6.50mm..........7.00mm..........7.50mm..........8.00mm..........
DSCP031-M050..........DSCP031-M100..........DSCP031-M150..........DSCP031-M200..........DSCP031-M250..........DSCP031-M300..........DSCP031-M350..........DSCP031-M400..........DSCP031-M450..........DSCP031-M500..........DSCP031-M550..........DSCP031-M600..........DSCP031-M650..........DSCP031-M700..........DSCP031-M750..........DSCP031-M800..........
41-502-1960, SAS 65163-0541-502-1961, SAS 65163-1041-502-1962, SAS 65163-1541-502-1963, SAS 65163-2041-502-1964, SAS 65163-2541-502-1965, SAS 65163-3041-502-1966, SAS 65163-3541-502-1967, SAS 65163-4041-502-1968, SAS 65163-4541-502-1969, SAS 65163-5041-502-1970, SAS 65163-5541-502-1971, SAS 65163-6041-502-1972, SAS 65163-6541-502-1973, SAS 65163-7041-502-1974, SAS 65163-7541-502-1975, SAS 65163-80
0.50mm..........1.00mm..........1.50mm..........2.00mm..........4.50mm..........
DSCP033 Series SpacersDSC Part No. Thickness Other part numbersDSCP033-M050..........DSCP033-M100..........DSCP033-M150..........DSCP033-M200..........DSCP033-M450..........
FS 21-09-0305FS 21-09-0310FS 21-09-0315FS 21-09-0320FS 21-09-0345
DSC Part No. Thickness Other part #sDSCP034 Series SpacersDSC Part No. Thickness Other part #s
3.00mm..........3.20mm..........3.40mm..........3.60mm..........3.80mm..........4.00mm..........4.20mm..........4.40mm..........4.60mm..........4.80mm..........5.00mm..........5.20mm..........5.40mm..........5.60mm..........5.80mm..........6.00mm..........6.20mm..........
DSCP034-M300..........DSCP034-M320..........DSCP034-M340..........DSCP034-M360..........DSCP034-M380..........DSCP034-M400..........DSCP034-M420..........DSCP034-M440..........DSCP034-M460..........DSCP034-M480..........DSCP034-M500..........DSCP034-M520..........DSCP034-M540..........DSCP034-M560..........DSCP034-M580..........DSCP034-M600..........DSCP034-M620..........
DSCP034-M640..........DSCP034-M660..........DSCP034-M680..........DSCP034-M700..........
ACS330SACS332SACS334SACS336SACS338SACS340SACS342SACS344SACS346SACS348SACS350SACS352SACS354SACS356SACS358SACS360SACS362S
6.40mm..........6.60mm..........6.80mm..........7.00mm..........
ACS364SACS366SACS368SACS370S
0.42 [10.7]TYP
0.34 [8.6] TYP0.30 [7.6]
0.45 [11.4] TYP
2.00 [50.8]
1.66 [42.2]0.40 [10.2]2.50 [63.5]
0.40 [10.2]TYP
0.58 [14.6] 1.00 [25.4]TYP
3.15 [80.0]
0.50 [12.7]
1.00 [25.4]
1.00 [25.4]
0.40 [10.2]TYP
0.50 [12.7]
2.00 [50.8]
0.40 [10.2] 0.60 [15.2] TYP
4.33 [110.0]
0.41 [10.5] TYP
1.58 [40.0]
0.79 [20.0]
4.33 [110.0]
1.38 [35.0]TYP
0.79 [20.0]
SPACERSDrawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted
Most spacers are etched on the side with thickness
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 46
DSC Part No. Thickness Other part #s
3.00mm..........3.20mm..........3.40mm..........3.60mm..........3.80mm..........4.00mm..........4.20mm..........4.40mm..........4.60mm..........4.80mm..........5.00mm..........5.20mm..........5.40mm..........5.60mm..........5.80mm..........6.00mm..........6.20mm..........
DSCP035 Series SpacersDSC Part No. Thickness Other part #sDSCP035-M300..........DSCP035-M320..........DSCP035-M340..........DSCP035-M360..........DSCP035-M380..........DSCP035-M400..........DSCP035-M420..........DSCP035-M440..........DSCP035-M460..........DSCP035-M480..........DSCP035-M500..........DSCP035-M520..........DSCP035-M540..........DSCP035-M560..........DSCP035-M580..........DSCP035-M600..........DSCP035-M620..........
ACS630ACS632ACS634ACS636ACS638ACS640ACS642ACS644ACS646ACS648ACS650ACS652ACS654ACS656ACS658ACS660ACS662
DSCP035-M640..........DSCP035-M660..........DSCP035-M680..........DSCP035-M700..........
6.40mm..........6.60mm..........6.80mm..........7.00mm..........
ACS664ACS666ACS668ACS670
DSC Part No. Thickness Other part #sDSCP036 Series SpacersDSC Part No. Thickness Other part #s
3.00mm..........3.20mm..........3.40mm..........3.60mm..........3.80mm..........4.00mm..........4.20mm..........4.40mm..........4.60mm..........4.80mm..........5.00mm..........5.20mm..........5.40mm..........5.60mm..........5.80mm..........6.00mm..........6.20mm..........
DSCP036-M300..........DSCP036-M320..........DSCP036-M340..........DSCP036-M360..........DSCP036-M380..........DSCP036-M400..........DSCP036-M420..........DSCP036-M440..........DSCP036-M460..........DSCP036-M480..........DSCP036-M500..........DSCP036-M520..........DSCP036-M540..........DSCP036-M560..........DSCP036-M580..........DSCP036-M600..........DSCP036-M620..........
DSCP036-M640..........DSCP036-M660..........DSCP036-M680..........DSCP036-M700..........
ASP330NASP332NASP334NASP336NASP338NASP340NASP342NASP344NASP346NASP348NASP350NASP352NASP354NASP356NASP358NASP360NASP362N
ASP364NASP366NASP368NASP370N
6.40mm..........6.60mm..........6.80mm..........7.00mm..........
DSC Part No. Thickness Other part #sDSCP037 Series SpacersDSC Part No. Thickness Other part #s
3.00mm..........3.20mm..........3.40mm..........3.60mm..........3.80mm..........4.00mm..........4.20mm..........4.40mm..........4.60mm..........4.80mm..........5.00mm..........5.20mm..........5.40mm..........5.60mm..........5.80mm..........6.00mm..........6.20mm..........
DSCP037-M300..........DSCP037-M320..........DSCP037-M340..........DSCP037-M360..........DSCP037-M380..........DSCP037-M400..........DSCP037-M420..........DSCP037-M440..........DSCP037-M460..........DSCP037-M480..........DSCP037-M500..........DSCP037-M520..........DSCP037-M540..........DSCP037-M560..........DSCP037-M580..........DSCP037-M600..........DSCP037-M620..........
DSCP037-M640..........DSCP037-M660..........DSCP037-M680..........DSCP037-M700..........
ASP430NASP432NASP434NASP436NASP438NASP440NASP442NASP444NASP446NASP448NASP450NASP452NASP454NASP456NASP458NASP460NASP462N
ASP464NASP466NASP468NASP470N
6.40mm..........6.60mm..........6.80mm..........7.00mm..........
Ø0.35 [9.0]TYP
Ø0.35 [9.0] TYP
0.31 [8.0] 0.59 [15.0]TYP
1.81 [46.0]
0.79 [20.0]
0.79 [20.0]
0.59 [15.0] TYP0.31 [8.0]
2.40 [61.0]
1.18 [30.0] 1.18 [30.0]0.79 [20.0]
Ø0.75 [19.0](4) PLCS
Ø0.41 [10.5](4) PLCS
0.69 [17.5] 2.56 [65.0]
3.94 [100.0]
2.56 [65.0]
0.69 [17.5]
3.94 [100.0]
1.38 [35.0]
2.76 [70.0]
SPACERSDrawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted
Most spacers are etched on the side with thickness
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 47
DSCP039 Series SpacersDSC Part No. Thickness Other part numbers
4.00mm..........4.25mm..........4.50mm..........4.75mm..........5.00mm..........5.25mm..........5.50mm..........5.75mm..........6.00mm..........6.25mm..........6.50mm..........6.75mm..........7.00mm..........7.25mm..........7.50mm..........7.75mm..........8.00mm..........
DSCP039-M400..........DSCP039-M425..........DSCP039-M450..........DSCP039-M475..........DSCP039-M500..........DSCP039-M525..........DSCP039-M550..........DSCP039-M575..........DSCP039-M600..........DSCP039-M625..........DSCP039-M650..........DSCP039-M675..........DSCP039-M700..........DSCP039-M725..........DSCP039-M750..........DSCP039-M775..........DSCP039-M800..........
56ZF28047-0156ZF28047-0256ZF28047-0356ZF28047-0456ZF28047-0556ZF28047-0656ZF28047-0756ZF28047-0856ZF28047-0956ZF28047-1056ZF28047-1156ZF28047-1256ZF28047-1356ZF28047-1456ZF28047-1556ZF28047-1656ZF28047-17
4.00mm..........4.25mm..........4.50mm..........4.75mm..........5.00mm..........5.25mm..........5.50mm..........5.75mm..........6.00mm..........6.25mm..........6.50mm..........6.75mm..........7.00mm..........7.25mm..........7.50mm..........7.75mm..........8.00mm..........
DSCP040 Series SpacersDSC Part No. Thickness Other part numbersDSCP040-M400..........DSCP040-M425..........DSCP040-M450..........DSCP040-M475..........DSCP040-M500..........DSCP040-M525..........DSCP040-M550..........DSCP040-M575..........DSCP040-M600..........DSCP040-M625..........DSCP040-M650..........DSCP040-M675..........DSCP040-M700..........DSCP040-M725..........DSCP040-M750..........DSCP040-M775..........DSCP040-M800..........
56ZF28048-0156ZF28048-0256ZF28048-0356ZF28048-0456ZF28048-0556ZF28048-0656ZF28048-0756ZF28048-0856ZF28048-0956ZF28048-1056ZF28048-1156ZF28048-1256ZF28048-1356ZF28048-1456ZF28048-1556ZF28048-1656ZF28048-17
4.00mm..........4.25mm..........4.50mm..........4.75mm..........5.00mm..........5.25mm..........5.50mm..........5.75mm..........6.00mm..........6.25mm..........6.50mm..........6.75mm..........7.00mm..........7.25mm..........7.50mm..........7.75mm..........8.00mm..........
DSCP041 Series SpacersDSC Part No. Thickness Other part numbersDSCP041-M400..........DSCP041-M425..........DSCP041-M450..........DSCP041-M475..........DSCP041-M500..........DSCP041-M525..........DSCP041-M550..........DSCP041-M575..........DSCP041-M600..........DSCP041-M625..........DSCP041-M650..........DSCP041-M675..........DSCP041-M700..........DSCP041-M725..........DSCP041-M750..........DSCP041-M775..........DSCP041-M800..........
56ZF28049-0156ZF28049-0256ZF28049-0356ZF28049-0456ZF28049-0556ZF28049-0656ZF28049-0756ZF28049-0856ZF28049-0956ZF28049-1056ZF28049-1156ZF28049-1256ZF28049-1356ZF28049-1456ZF28049-1556ZF28049-1656ZF28049-17
Ø0.41 [10.4]TYP
Ø0.41 [10.4]TYP
1.81 [46.0]
0.32 [8.0] 0.59 [15.0]TYP
0.98 [25.0]
Ø0.41 [10.4]TYP
1.77 [45.0]
1.00 [25.4]
1.00 [25.4]0.38 [9.7]
DSC Part No. Thickness Other part #s
3.00mm..........3.20mm..........3.40mm..........3.60mm..........3.80mm..........4.00mm..........4.20mm..........4.40mm..........4.60mm..........4.80mm..........5.00mm..........5.20mm..........5.40mm..........5.60mm..........5.80mm..........6.00mm..........6.20mm..........
DSCP038 Series SpacersDSC Part No. Thickness Other part #sDSCP038-M300..........DSCP038-M320..........DSCP038-M340..........DSCP038-M360..........DSCP038-M380..........DSCP038-M400..........DSCP038-M420..........DSCP038-M440..........DSCP038-M460..........DSCP038-M480..........DSCP038-M500..........DSCP038-M520..........DSCP038-M540..........DSCP038-M560..........DSCP038-M580..........DSCP038-M600..........DSCP038-M620..........
DSCP038-M640..........DSCP038-M660..........DSCP038-M680..........DSCP038-M700..........
ASP630NASP632NASP634NASP636NASP638NASP640NASP642NASP644NASP646NASP648NASP650NASP652NASP654NASP656NASP658NASP660NASP662N
6.40mm..........6.60mm..........6.80mm..........7.00mm..........
ASP664NASP666NASP668NASP670N
Ø0.35 [9.0]TYP 1.97 [50.0]
1.57 [40.0]
0.35 [9.0]
0.59 [15.0]TYP
0.39 [10.0]
2.28 [58.0]
2.40 [61.0]
0.98 [25.0]
0.31 [8.0] 0.59 [15.0]TYP
SPACERSDrawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted
Most spacers are etched on the side with thickness
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 48
4.00mm..........4.25mm..........4.50mm..........4.75mm..........5.00mm..........5.25mm..........5.50mm..........5.75mm..........6.00mm..........6.25mm..........6.50mm..........6.75mm..........7.00mm..........7.25mm..........7.50mm..........7.75mm..........8.00mm..........
DSCP042 Series SpacersDSC Part No. Thickness Other part numbersDSCP042-M400..........DSCP042-M425..........DSCP042-M450..........DSCP042-M475..........DSCP042-M500..........DSCP042-M525..........DSCP042-M550..........DSCP042-M575..........DSCP042-M600..........DSCP042-M625..........DSCP042-M650..........DSCP042-M675..........DSCP042-M700..........DSCP042-M725..........DSCP042-M750..........DSCP042-M775..........DSCP042-M800..........
56ZF28050-0156ZF28050-0256ZF28050-0356ZF28050-0456ZF28050-0556ZF28050-0656ZF28050-0756ZF28050-0856ZF28050-0956ZF28050-1056ZF28050-1156ZF28050-1256ZF28050-1356ZF28050-1456ZF28050-1556ZF28050-1656ZF28050-17
4.00mm..........4.25mm..........4.50mm..........4.75mm..........5.00mm..........5.25mm..........5.50mm..........5.75mm..........6.00mm..........6.25mm..........6.50mm..........6.75mm..........7.00mm..........7.25mm..........7.50mm..........7.75mm..........8.00mm..........
DSCP043 Series SpacersDSC Part No. Thickness Other part numbersDSCP043-M400..........DSCP043-M425..........DSCP043-M450..........DSCP043-M475..........DSCP043-M500..........DSCP043-M525..........DSCP043-M550..........DSCP043-M575..........DSCP043-M600..........DSCP043-M625..........DSCP043-M650..........DSCP043-M675..........DSCP043-M700..........DSCP043-M725..........DSCP043-M750..........DSCP043-M775..........DSCP043-M800..........
56ZF28466-0156ZF28466-0256ZF28466-0356ZF28466-0456ZF28466-0556ZF28466-0656ZF28466-0756ZF28466-0856ZF28466-0956ZF28466-1056ZF28466-1156ZF28466-1256ZF28466-1356ZF28466-1456ZF28466-1556ZF28466-1656ZF28466-17
4.00mm..........4.25mm..........4.50mm..........4.75mm..........5.00mm..........5.25mm..........5.50mm..........5.75mm..........6.00mm..........6.25mm..........6.50mm..........6.75mm..........7.00mm..........7.25mm..........7.50mm..........7.75mm..........8.00mm..........
DSCP044 Series SpacersDSC Part No. Thickness Other part numbersDSCP044-M400..........DSCP044-M425..........DSCP044-M450..........DSCP044-M475..........DSCP044-M500..........DSCP044-M525..........DSCP044-M550..........DSCP044-M575..........DSCP044-M600..........DSCP044-M625..........DSCP044-M650..........DSCP044-M675..........DSCP044-M700..........DSCP044-M725..........DSCP044-M750..........DSCP044-M775..........DSCP044-M800..........
56ZF28467-0156ZF28467-0256ZF28467-0356ZF28467-0456ZF28467-0556ZF28467-0656ZF28467-0756ZF28467-0856ZF28467-0956ZF28467-1056ZF28467-1156ZF28467-1256ZF28467-1356ZF28467-1456ZF28467-1556ZF28467-1656ZF28467-17
DSCP045 Series SpacersDSC Part No. Thickness Other part numbers
4.00mm..........4.25mm..........4.50mm..........4.75mm..........5.00mm..........5.25mm..........5.50mm..........5.75mm..........6.00mm..........6.25mm..........6.50mm..........6.75mm..........7.00mm..........7.25mm..........7.50mm..........7.75mm..........8.00mm..........
DSCP045-M400..........DSCP045-M425..........DSCP045-M450..........DSCP045-M475..........DSCP045-M500..........DSCP045-M525..........DSCP045-M550..........DSCP045-M575..........DSCP045-M600..........DSCP045-M625..........DSCP045-M650..........DSCP045-M675..........DSCP045-M700..........DSCP045-M725..........DSCP045-M750..........DSCP045-M775..........DSCP045-M800..........
56ZF27464-0156ZF27464-0256ZF27464-0356ZF27464-0456ZF27464-0556ZF27464-0656ZF27464-0756ZF27464-0856ZF27464-0956ZF27464-1056ZF27464-1156ZF27464-1256ZF27464-1356ZF27464-1456ZF27464-1556ZF27464-1656ZF27464-17
Ø0.41 [10.4]TYP 2.75 [69.9]
1.00 [25.4]
1.00 [25.4]TYP
0.38 [9.7]
Ø0.41 [10.4]TYP
2.48 [63.0]
1.96 [49.8]
0.36 [9.1]1.77 [45.0]
0.39 [9.9]
0.60 [15.2]TYP
Ø0.41 [10.4]TYP
5.00 [127.0]
2.25 [57.2]
0.47 [11.9] 4.13 [104.9]
0.41 [10.4]
0.71 [18.0]TYP
Ø0.34 [8.6]TYP
1.50 [38.1]
1.00 [25.4]
0.45 [11.4]TYP
0.30 [7.6]
SPACERSDrawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted
Most spacers are etched on the side with thickness
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 49
DSCP047 Series SpacersDSC Part No. Thickness Other part numbers
4.00mm..........4.25mm..........4.50mm..........4.75mm..........5.00mm..........5.25mm..........5.50mm..........5.75mm..........6.00mm..........6.25mm..........6.50mm..........6.75mm..........7.00mm..........7.25mm..........7.50mm..........7.75mm..........8.00mm..........
DSCP046 Series SpacersDSC Part No. Thickness Other part numbers
4.00mm..........4.25mm..........4.50mm..........4.75mm..........5.00mm..........5.25mm..........5.50mm..........5.75mm..........6.00mm..........6.25mm..........6.50mm..........6.75mm..........7.00mm..........7.25mm..........7.50mm..........7.75mm..........8.00mm..........
DSCP047-M400..........DSCP047-M425..........DSCP047-M450..........DSCP047-M475..........DSCP047-M500..........DSCP047-M525..........DSCP047-M550..........DSCP047-M575..........DSCP047-M600..........DSCP047-M625..........DSCP047-M650..........DSCP047-M675..........DSCP047-M700..........DSCP047-M725..........DSCP047-M750..........DSCP047-M775..........DSCP047-M800..........
DSCP046-M400..........DSCP046-M425..........DSCP046-M450..........DSCP046-M475..........DSCP046-M500..........DSCP046-M525..........DSCP046-M550..........DSCP046-M575..........DSCP046-M600..........DSCP046-M625..........DSCP046-M650..........DSCP046-M675..........DSCP046-M700..........DSCP046-M725..........DSCP046-M750..........DSCP046-M775..........DSCP046-M800..........
56ZF27461-0156ZF27461-0256ZF27461-0356ZF27461-0456ZF27461-0556ZF27461-0656ZF27461-0756ZF27461-0856ZF27461-0956ZF27461-1056ZF27461-1156ZF27461-1256ZF27461-1356ZF27461-1456ZF27461-1556ZF27461-1656ZF27461-17
56ZF27462-0156ZF27462-0256ZF27462-0356ZF27462-0456ZF27462-0556ZF27462-0656ZF27462-0756ZF27462-0856ZF27462-0956ZF27462-1056ZF27462-1156ZF27462-1256ZF27462-1356ZF27462-1456ZF27462-1556ZF27462-1656ZF27462-17
DSCP049 Series SpacersDSC Part No. Thickness Other part numbers
4.00mm..........4.25mm..........4.50mm..........4.75mm..........5.00mm..........5.25mm..........5.50mm..........5.75mm..........6.00mm..........6.25mm..........6.50mm..........6.75mm..........7.00mm..........7.25mm..........7.50mm..........7.75mm..........8.00mm..........
DSCP048 Series SpacersDSC Part No. Thickness Other part numbers
4.00mm..........4.25mm..........4.50mm..........4.75mm..........5.00mm..........5.25mm..........5.50mm..........5.75mm..........6.00mm..........6.25mm..........6.50mm..........6.75mm..........7.00mm..........7.25mm..........7.50mm..........7.75mm..........8.00mm..........
DSCP049-M400..........DSCP049-M425..........DSCP049-M450..........DSCP049-M475..........DSCP049-M500..........DSCP049-M525..........DSCP049-M550..........DSCP049-M575..........DSCP049-M600..........DSCP049-M625..........DSCP049-M650..........DSCP049-M675..........DSCP049-M700..........DSCP049-M725..........DSCP049-M750..........DSCP049-M775..........DSCP049-M800..........
DSCP048-M400..........DSCP048-M425..........DSCP048-M450..........DSCP048-M475..........DSCP048-M500..........DSCP048-M525..........DSCP048-M550..........DSCP048-M575..........DSCP048-M600..........DSCP048-M625..........DSCP048-M650..........DSCP048-M675..........DSCP048-M700..........DSCP048-M725..........DSCP048-M750..........DSCP048-M775..........DSCP048-M800..........
56ZF27465-0156ZF27465-0256ZF27465-0356ZF27465-0456ZF27465-0556ZF27465-0656ZF27465-0756ZF27465-0856ZF27465-0956ZF27465-1056ZF27465-1156ZF27465-1256ZF27465-1356ZF27465-1456ZF27465-1556ZF27465-1656ZF27465-17
56ZF27463-0156ZF27463-0256ZF27463-0356ZF27463-0456ZF27463-0556ZF27463-0656ZF27463-0756ZF27463-0856ZF27463-0956ZF27463-1056ZF27463-1156ZF27463-1256ZF27463-1356ZF27463-1456ZF27463-1556ZF27463-1656ZF27463-17
Ø0.34 [8.6]TYP
Ø0.41 [10.4]TYP
1.00 [25.4]
1.88 [47.8]
0.27 [6.9] 0.45 [11.4]TYP
6.00 [152.4]
0.50 [12.7] 1.00 [25.4]TYP
1.00 [25.4]
Ø0.34 [8.6]TYP
5.00 [127.0]
0.63 [15.9]TYP
0.38 [9.5]
4.00 [101.6]0.50 [12.7]
2.00 [50.8]
Ø0.34 [8.6]TYP 0.45 [11.4]
TYP
1.00 [25.4]
1.75 [44.5]0.38 [9.5]
1.75 [44.5]
2.50 [63.5]
SPACERSDrawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted
Most spacers are etched on the side with thickness
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 50
Ø0.41 [10.5]TYP
0.25mm..........0.50mm..........1.00mm..........2.00mm..........3.00mm..........3.20mm..........3.40mm..........3.60mm..........3.80mm..........4.00mm..........4.20mm..........4.40mm..........4.60mm..........4.80mm..........5.00mm..........5.20mm..........5.40mm..........5.60mm..........5.80mm..........6.00mm..........6.20mm..........6.40mm..........6.60mm..........6.80mm..........7.00mm..........
DSCP050 Series SpacersDSC Part No. Thickness Other part numbersDSCP050-M025..........DSCP050-M050..........DSCP050-M100..........DSCP050-M200..........DSCP050-M300..........DSCP050-M320..........DSCP050-M340..........DSCP050-M360..........DSCP050-M380..........DSCP050-M400..........DSCP050-M420..........DSCP050-M440..........DSCP050-M460..........DSCP050-M480..........DSCP050-M500..........DSCP050-M520..........DSCP050-M540..........DSCP050-M560..........DSCP050-M580..........DSCP050-M600..........DSCP050-M620..........DSCP050-M640..........DSCP050-M660..........DSCP050-M680..........DSCP050-M700..........
ASP302ASP305ASP310ASP320ASP330, FSD 41294-51, SP1-30, 41-502-2200, 56ZF28047-101ASP332, FSD 41294-52, SP1-32, 41-502-2201, 56ZF28047-102ASP334, FSD 41294-53, SP1-34, 41-502-2202, 56ZF28047-103ASP336, FSD 41294-54, SP1-36, 41-502-2203, 56ZF28047-104ASP338, FSD 41294-55, SP1-38, 41-502-2204, 56ZF28047-105ASP340, FSD 41294-56, SP1-40, 41-502-2205, 56ZF28047-106ASP342, FSD 41294-57, SP1-42, 41-502-2206, 56ZF28047-107ASP344, FSD 41294-58, SP1-44, 41-502-2207, 56ZF28047-108ASP346, FSD 41294-59, SP1-46, 41-502-2208, 56ZF28047-109ASP348, FSD 41294-60, SP1-48, 41-502-2209, 56ZF28047-110ASP350, FSD 41294-61, SP1-50, 41-502-2210, 56ZF28047-111ASP352, FSD 41294-62, SP1-52, 41-502-2211, 56ZF28047-112ASP354, FSD 41294-63, SP1-54, 41-502-2212, 56ZF28047-113ASP356, FSD 41294-64, SP1-56, 41-502-2213, 56ZF28047-114ASP358, FSD 41294-65, SP1-58, 41-502-2214, 56ZF28047-115ASP360, FSD 41294-66, SP1-60, 41-502-2215, 56ZF28047-116ASP362, FSD 41294-67, SP1-62, 41-502-2216, 56ZF28047-117ASP364, FSD 41294-68, SP1-64, 41-502-2217, 56ZF28047-118ASP366, FSD 41294-69, SP1-66, 41-502-2218, 56ZF28047-119ASP368, FSD 41294-70, SP1-68, 41-502-2219, 56ZF28047-120ASP370, FSD 41294-71, SP1-70, 41-502-2220, 56ZF28047-121
0.25mm..........0.50mm..........1.00mm..........2.00mm..........3.00mm..........3.20mm..........3.40mm..........3.60mm..........3.80mm..........4.00mm..........4.20mm..........4.40mm..........4.60mm..........4.80mm..........5.00mm..........5.20mm..........5.40mm..........5.60mm..........5.80mm..........6.00mm..........6.20mm..........6.40mm..........6.60mm..........6.80mm..........7.00mm..........
DSCP051 Series SpacersDSC Part No. Thickness Other part numbersDSCP051-M025..........DSCP051-M050..........DSCP051-M100..........DSCP051-M200..........DSCP051-M300..........DSCP051-M320..........DSCP051-M340..........DSCP051-M360..........DSCP051-M380..........DSCP051-M400..........DSCP051-M420..........DSCP051-M440..........DSCP051-M460..........DSCP051-M480..........DSCP051-M500..........DSCP051-M520..........DSCP051-M540..........DSCP051-M560..........DSCP051-M580..........DSCP051-M600..........DSCP051-M620..........DSCP051-M640..........DSCP051-M660..........DSCP051-M680..........DSCP051-M700..........
ASP402ASP405ASP410ASP420ASP430, FSD 41295-51, SP2-30, 41-502-2221, 56ZF28048-101ASP432, FSD 41295-52, SP2-32, 41-502-2222, 56ZF28048-102ASP434, FSD 41295-53, SP2-34, 41-502-2223, 56ZF28048-103ASP436, FSD 41295-54, SP2-36, 41-502-2224, 56ZF28048-104ASP438, FSD 41295-55, SP2-38, 41-502-2225, 56ZF28048-105ASP440, FSD 41295-56, SP2-40, 41-502-2226, 56ZF28048-106ASP442, FSD 41295-57, SP2-42, 41-502-2227, 56ZF28048-107ASP444, FSD 41295-58, SP2-44, 41-502-2228, 56ZF28048-108ASP446, FSD 41295-59, SP2-46, 41-502-2229, 56ZF28048-109ASP448, FSD 41295-60, SP2-48, 41-502-2230, 56ZF28048-110ASP450, FSD 41295-61, SP2-50, 41-502-2231, 56ZF28048-111ASP452, FSD 41295-62, SP2-52, 41-502-2232, 56ZF28048-112ASP454, FSD 41295-63, SP2-54, 41-502-2233, 56ZF28048-113ASP456, FSD 41295-64, SP2-56, 41-502-2234, 56ZF28048-114ASP458, FSD 41295-65, SP2-58, 41-502-2235, 56ZF28048-115ASP460, FSD 41295-66, SP2-60, 41-502-2236, 56ZF28048-116ASP462, FSD 41295-67, SP2-62, 41-502-2237, 56ZF28048-117ASP464, FSD 41295-68, SP2-64, 41-502-2238, 56ZF28048-118ASP466, FSD 41295-69, SP2-66, 41-502-2239, 56ZF28048-119ASP468, FSD 41295-70, SP2-68, 41-502-2240, 56ZF28048-120ASP470, FSD 41295-71, SP2-70, 41-502-2241, 56ZF28048-121
Ø0.41 [10.5]TYP
ASP502, DSC502ASP505, DSC505ASP510, DSC510ASP520, DSC520ASP530, DSC530ASP532, DSC532ASP534, DSC534ASP536, DSC536ASP538, DSC538ASP540, DSC540ASP542, DSC542ASP544, DSC544ASP546, DSC546ASP548, DSC548ASP550, DSC550ASP552, DSC552ASP554, DSC554ASP556, DSC556ASP558, DSC558ASP560, DSC560ASP562, DSC562ASP564, DSC564ASP566, DSC566ASP568, DSC568ASP570, DSC570
0.25mm..........0.50mm..........1.00mm..........2.00mm..........3.00mm..........3.20mm..........3.40mm..........3.60mm..........3.80mm..........4.00mm..........4.20mm..........4.40mm..........4.60mm..........4.80mm..........5.00mm..........5.20mm..........5.40mm..........5.60mm..........5.80mm..........6.00mm..........6.20mm..........6.40mm..........6.60mm..........6.80mm..........7.00mm..........
DSCP052-M025..........DSCP052-M050..........DSCP052-M100..........DSCP052-M200..........DSCP052-M300..........DSCP052-M320..........DSCP052-M340..........DSCP052-M360..........DSCP052-M380..........DSCP052-M400..........DSCP052-M420..........DSCP052-M440..........DSCP052-M460..........DSCP052-M480..........DSCP052-M500..........DSCP052-M520..........DSCP052-M540..........DSCP052-M560..........DSCP052-M580..........DSCP052-M600..........DSCP052-M620..........DSCP052-M640..........DSCP052-M660..........DSCP052-M680..........DSCP052-M700..........
DSCP052 Series SpacersDSC Part No. Thickness Other part numbers
Ø0.41 [10.5]TYP
1.81 [46.0]
0.59 [15.0]TYP
0.32 [8.0]
0.98 [25.0]
0.59 [15.0]TYP
0.31 [8.0]
2.40 [61.0]
0.98 [25.0]
0.31 [8.0] 0.59 [15.0]TYP
2.99 [76.0]
0.98 [25.0]
SPACERSDrawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted
Most spacers are etched on the side with thickness
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 51
ASP602ASP605ASP610ASP620ASP630, FSD 41296-51, SP3-30, 41-502-2242, 56ZF28066-101ASP632, FSD 41296-52, SP3-32, 41-502-2243, 56ZF28066-102ASP634, FSD 41296-53, SP3-34, 41-502-2244, 56ZF28066-103ASP636, FSD 41296-54, SP3-36, 41-502-2245, 56ZF28066-104ASP638, FSD 41296-55, SP3-38, 41-502-2246, 56ZF28066-105ASP640, FSD 41296-56, SP3-40, 41-502-2247, 56ZF28066-106ASP642, FSD 41296-57, SP3-42, 41-502-2248, 56ZF28066-107ASP644, FSD 41296-58, SP3-44, 41-502-2249, 56ZF28066-108ASP646, FSD 41296-59, SP3-46, 41-502-2250, 56ZF28066-109ASP648, FSD 41296-60, SP3-48, 41-502-2251, 56ZF28066-110ASP650, FSD 41296-61, SP3-50, 41-502-2252, 56ZF28066-111ASP652, FSD 41296-62, SP3-52, 41-502-2253, 56ZF28066-112ASP654, FSD 41296-63, SP3-54, 41-502-2254, 56ZF28066-113ASP656, FSD 41296-64, SP3-56, 41-502-2255, 56ZF28066-114ASP658, FSD 41296-65, SP3-58, 41-502-2256, 56ZF28066-115ASP660, FSD 41296-66, SP3-60, 41-502-2257, 56ZF28066-116ASP662, FSD 41296-67, SP3-62, 41-502-2258, 56ZF28066-117ASP664, FSD 41296-68, SP3-64, 41-502-2259, 56ZF28066-118ASP666, FSD 41296-69, SP3-66, 41-502-2260, 56ZF28066-119ASP668, FSD 41296-70, SP3-68, 41-502-2261, 56ZF28066-120ASP670, FSD 41296-71, SP3-70, 41-502-2262, 56ZF28066-121
DSCP053 Series SpacersDSC Part No. Thickness Other part numbers
0.25mm..........0.50mm..........1.00mm..........2.00mm..........3.00mm..........3.20mm..........3.40mm..........3.60mm..........3.80mm..........4.00mm..........4.20mm..........4.40mm..........4.60mm..........4.80mm..........5.00mm..........5.20mm..........5.40mm..........5.60mm..........5.80mm..........6.00mm..........6.20mm..........6.40mm..........6.60mm..........6.80mm..........7.00mm..........
DSCP053-M025..........DSCP053-M050..........DSCP053-M100..........DSCP053-M200..........DSCP053-M300..........DSCP053-M320..........DSCP053-M340..........DSCP053-M360..........DSCP053-M380..........DSCP053-M400..........DSCP053-M420..........DSCP053-M440..........DSCP053-M460..........DSCP053-M480..........DSCP053-M500..........DSCP053-M520..........DSCP053-M540..........DSCP053-M560..........DSCP053-M580..........DSCP053-M600..........DSCP053-M620..........DSCP053-M640..........DSCP053-M660..........DSCP053-M680..........DSCP053-M700..........
Ø0.41 [10.5]TYP
DSCP054 Series SpacersDSC Part No. Thickness Other part numbers
.125 inch........DSCP054-E125.......... FSD 14237
.125 inch........
DSCP056 Series SpacersDSC Part No. Thickness Other part numbersDSCP056-E125.......... FSD 14235
DSCP055 Series SpacersDSC Part No. Thickness Other part numbersDSCP055-E125.......... .125 inch........ FSD 14236
Ø0.25
Ø0.39
Ø0.34(2) PLCS
Ø0.25
1.00
Ø0.53(2) PLCS
Ø0.25
DSCP057 Series SpacersDSC Part No. Thickness Other part numbersDSCP057-E125.......... FSD 14240.125 inch........
Ø0.39Ø0.25(2) PLCS
0.59 [15.0]TYP
0.39 [10.0]
0.35 [9.0]
1.77 [45.0]2.48 [63.0]
1.97 [50.0]
0.16 1.10
0.42
1.95 1.12
0.582.26
0.32
0.37
0.39 0.84
0.141.630.90
0.72
0.320.58
1.63 0.94
0.36
1.100.16
3.06
1.121.11
0.84
0.37
0.39
0.320.58
1.12
2.881.600.34
0.50
2.131.22
0.32 [8.1]0.58
SPACERSDrawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted
Most spacers are etched on the side with thickness
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 52
DSCP058 Series SpacersDSC Part No. Thickness Other part numbers
.062 inch........
.125 inch........DSCP058-E062..........DSCP058-E125..........
FSD 14131-51FSD 14131-52
.062 inch........
.125 inch........
DSCP060 Series SpacersDSC Part No. Thickness Other part numbersDSCP060-E062..........DSCP060-E125..........
FSD 14137-51FSD 14137-52
.062 inch........
.125 inch........
DSCP062 Series SpacersDSC Part No. Thickness Other part numbersDSCP062-E062..........DSCP062-E125..........
FSD 14139-51FSD 14139-52
DSCP064 Series SpacersDSC Part No. Thickness Other part numbers
.062 inch........
.125 inch........DSCP064-E062..........DSCP064-E125..........
FSD 14141-51FSD 14141-52
.062 inch........
.125 inch........
DSCP059 Series SpacersDSC Part No. Thickness Other part numbersDSCP059-E062..........DSCP059-E125..........
FSD 14136-51FSD 14136-52
DSCP061 Series SpacersDSC Part No. Thickness Other part numbers
.062 inch........
.125 inch........DSCP061-E062..........DSCP061-E125..........
FSD 14138-51FSD 14138-52
DSCP063 Series SpacersDSC Part No. Thickness Other part numbers
.062 inch........
.125 inch........DSCP063-E062..........DSCP063-E125..........
FSD 14140-51FSD 14140-52
DSCP065 Series SpacersDSC Part No. Thickness Other part numbers
.062 inch........
.125 inch........DSCP065-E062..........DSCP065-E125..........
FSD 14142-51FSD 14142-52
1.25 [31.8]0.63 [16.0]
0.62 [15.7]1.86 [47.2]
1.25 [31.8]0.63 [16.0]
0.94 [23.9]1.88 [47.8]
0.63 [16.0]
2.25 [57.2]1.12 [28.4]
1.25 [31.8] 1.25 [31.8]
2.62 [66.5]0.62 [15.7]
0.63 [16.0]
1.25 [31.8]
1.37 [34.8]
2.75 [69.9]
0.63 [16.0]
1.25 [31.8]
0.62 [15.7]2.87 [72.9]
0.63 [16.0]
0.63 [16.0]
1.25 [31.8]
1.63 [41.4]
3.25 [82.6]
1.25 [31.8]
1.88 [47.8]
3.75 [95.3]
0.63 [16.0]
Ø0.88 [22.3]Ø0.88 [22.3]
Ø0.88 [22.3] Ø0.88 [22.3]
Ø0.88 [22.3] Ø0.88 [22.3]
Ø0.88 [22.3] Ø0.88 [22.3]
SPACERSDrawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 53
.062 inch........
.125 inch........
.062 inch........
.125 inch........
FSD 14174-51FSD 14174-52
FSD 14147-51FSD 14147-52
.062 inch........
.125 inch........
.062 inch........
.125 inch........
FSD 14145-51FSD 14145-52
FSD 14143-51FSD 14143-52
DSCP073 Series SpacersDSC Part No. Thickness Other part numbers
.062 inch........
.125 inch........
.062 inch........
.125 inch........
DSCP071 Series SpacersDSC Part No. Thickness Other part numbers
DSCP073-E062..........DSCP073-E125..........
DSCP071-E062..........DSCP071-E125..........
FSD 14175-51FSD 14175-52
FSD 14148-51FSD 14148-52
.062 inch........
.125 inch........
DSCP069 Series SpacersDSC Part No. Thickness Other part numbersDSCP069-E062..........DSCP069-E125..........
FSD 14146-51FSD 14146-52
DSCP067 Series SpacersDSC Part No. Thickness Other part numbers
.062 inch........
.125 inch........DSCP067-E062..........DSCP067-E125..........
FSD 14144-51FSD 14144-52
DSCP072 Series SpacersDSC Part No. Thickness Other part numbers
DSCP070 Series SpacersDSC Part No. Thickness Other part numbers
DSCP072-E062..........DSCP072-E125..........
DSCP070-E062..........DSCP070-E125..........
DSCP068 Series SpacersDSC Part No. Thickness Other part numbers
DSCP066 Series SpacersDSC Part No. Thickness Other part numbers
DSCP068-E062..........DSCP068-E125..........
DSCP066-E062..........DSCP066-E125..........
Ø0.88 [22.4]Ø0.88 [22.4]TYP
0.63 [15.9]
2.24 [56.9]
3.48 [88.4]
0.63 [15.9]
1.25 [31.8]
Ø0.88 [22.4]TYP
Ø0.88 [22.4]
2.25 [57.2]
0.63 [15.9]2.50 [63.5]
0.63 [15.9]
Ø0.88 [22.4]
2.62 [66.5]
0.76 [19.3]3.00 [76.2]
0.62 [15.7]
1.87 [47.5]
0.63 [15.9]2.50 [63.5]
0.63 [15.9]
Ø0.88 [22.4]TYP
0.62 [15.7]
2.61 [66.3]
3.98 [101.1]
0.68 [17.3]
1.25 [31.8]
Ø0.88 [22.4]
1.25 [31.8]0.63 [15.9]
2.25 [57.2]
4.50 [114.3]
Ø0.88 [22.4]TYP
1.25 [31.8]
0.75 [19.1]
3.00 [76.2]
4.50 [114.3]
0.63 [15.9]
0.63 [15.9]
1.75 [44.5]
1.25 [31.8]
3.50 [88.9]
SPACERSDrawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 54
DSCP078 Series SpacersDSC Part No. Thickness Other part numbers
DSCP080 Series SpacersDSC Part No. Thickness Other part numbers
.25 inch..........
.32 inch..........DSCP080-E320..........
DSCP078-E250..........
FSD 40880
FSD 40879
DSCP074 Series SpacersDSC Part No. Thickness Other part numbers
DSCP076 Series SpacersDSC Part No. Thickness Other part numbers
.062 inch........
.125 inch........
.18 inch..........DSCP076-E180..........
DSCP074-E062..........DSCP074-E125..........
FSD 40878
FSD 14219-51FSD 14219-52
DSCP079 Series SpacersDSC Part No. Thickness Other part numbers
.25 inch..........
.32 inch..........
DSCP081 Series SpacersDSC Part No. Thickness Other part numbersDSCP081-E320..........
DSCP079-E250..........
FSD 40919
FSD 40918
DSCP077 Series SpacersDSC Part No. Thickness Other part numbers
.18 inch..........DSCP077-E180.......... FSD 40917
.062 inch........
.125 inch........
DSCP075 Series SpacersDSC Part No. Thickness Other part numbersDSCP075-E062..........DSCP075-E125..........
FSD 14230-51FSD 14230-52
Ø0.88
Ø1.06
Ø0.34TYP
Ø0.34TYP
Ø1.06
Ø1.44
Ø0.34TYP
Ø0.34TYP
Ø1.94
R0.19TYP Ø0.38
TYP
Ø1.94
Ø0.88 [22.4]TYP
1.24 [31.5]
0.56 [14.2]3.38 [85.9]
4.50 [114.3]
0.63 [15.9]
1.25
3.25
1.08TYP
0.63
0.121.08TYP
3.25
0.62
1.25
0.12
1.00TYP
2.62
Ø1.44
2.62
1.00TYP
0.78TYP
2.25
0.12
0.78TYP
2.25
0.751.50
0.751.50
SPACERSDrawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 55
DSCP083 Series SpacersDSC Part No. Thickness Other part numbers
.32 inch..........DSCP083-E320.......... FSD 40920
DSCP082 Series SpacersDSC Part No. Thickness Other part numbers
.32 inch..........DSCP082-E320.......... FSD 40881
Ø2.44
R0.26TYP
Ø0.52TYP
Ø2.44
DSC Part No. Thickness Other part #sDSCP084 Series SpacersDSC Part No. Thickness Other part #s
2.00mm..........2.20mm..........2.25mm..........2.40mm..........2.50mm..........2.60mm..........2.75mm..........2.80mm..........3.00mm..........3.20mm..........3.25mm..........3.40mm..........3.50mm..........3.60mm..........3.75mm..........3.80mm..........4.00mm..........4.12mm..........4.20mm..........4.25mm..........4.38mm..........4.40mm..........4.50mm..........4.60mm..........4.62mm..........4.75mm..........4.80mm..........4.88mm..........5.00mm..........5.12mm..........5.20mm..........5.25mm..........5.38mm..........5.40mm..........5.50mm..........5.60mm..........
DSCP084-M200..........DSCP084-M220..........DSCP084-M225..........DSCP084-M240..........DSCP084-M250..........DSCP084-M260..........DSCP084-M275..........DSCP084-M280..........DSCP084-M300..........DSCP084-M320..........DSCP084-M325..........DSCP084-M340..........DSCP084-M350..........DSCP084-M360..........DSCP084-M375..........DSCP084-M380..........DSCP084-M400..........DSCP084-M412..........DSCP084-M420..........DSCP084-M425..........DSCP084-M438..........DSCP084-M440..........DSCP084-M450..........DSCP084-M460..........DSCP084-M462..........DSCP084-M475..........DSCP084-M480..........DSCP084-M488..........DSCP084-M500..........DSCP084-M512..........DSCP084-M520..........DSCP084-M525..........DSCP084-M538..........DSCP084-M540..........DSCP084-M550..........DSCP084-M560..........
DSCP084-M562..........DSCP084-M575..........DSCP084-M580..........DSCP084-M588..........DSCP084-M600..........DSCP084-M612..........DSCP084-M620..........DSCP084-M625..........DSCP084-M638..........DSCP084-M640..........DSCP084-M650..........DSCP084-M660..........DSCP084-M662..........DSCP084-M675..........DSCP084-M680..........DSCP084-M688..........DSCP084-M700..........DSCP084-M712..........DSCP084-M720..........DSCP084-M725..........DSCP084-M738..........DSCP084-M740..........DSCP084-M750..........DSCP084-M760..........DSCP084-M775..........DSCP084-M780..........DSCP084-M788..........DSCP084-M800..........
D113022, D113085D113086D113023D113087D113024D113088D113025D113089D113026, D113090D113091D113027D113092D113028D113093D113029D113094D113030, D113095D113031D113096D113032D113033D113097D113034D113098D113035D113036D113099D113037D113038, D113100D113039D113101D113040D113041D113102D113042D113103
5.62mm..........5.75mm..........5.80mm..........5.88mm..........6.00mm..........6.12mm..........6.20mm..........6.25mm..........6.38mm..........6.40mm..........6.50mm..........6.60mm..........6.62mm..........6.75mm..........6.80mm..........6.88mm..........7.00mm..........7.12mm..........7.20mm..........7.25mm..........7.38mm..........7.40mm..........7.50mm..........7.60mm..........7.75mm..........7.80mm..........7.88mm..........8.00mm..........
D113043D113044D113104D113045D113046, D113105D113047D113106D113048D113049D113107D113050D113108D113051D113052D113109D113053D113054, D113110D113055D113111D113056D113057D113112D113058D113113D113060D113114D113061D113062, D113115
DSC Part No. Thickness Other part #sDSCP085 Series SpacersDSC Part No. Thickness Other part #s
3.00mm..........3.20mm..........3.40mm..........3.60mm..........3.80mm..........4.00mm..........4.20mm..........4.40mm..........4.60mm..........4.80mm..........5.00mm..........5.20mm..........5.40mm..........5.60mm..........5.80mm..........6.00mm..........6.20mm..........
DSCP085-M300..........DSCP085-M320..........DSCP085-M340..........DSCP085-M360..........DSCP085-M380..........DSCP085-M400..........DSCP085-M420..........DSCP085-M440..........DSCP085-M460..........DSCP085-M480..........DSCP085-M500..........DSCP085-M520..........DSCP085-M540..........DSCP085-M560..........DSCP085-M580..........DSCP085-M600..........DSCP085-M620..........
DSCP085-M640..........DSCP085-M660..........DSCP085-M680..........DSCP085-M700..........
D233007D233008D233009D233010D233011D233012D233013D233014D233015D233016D233017D233018D233019D233020D233021D233022D233023
6.40mm..........6.60mm..........6.80mm..........7.00mm..........
D233024D233025D233026D233027
0.59 [15.0] 1.18 [30.0]TYP
0.45 [11.3]
2.36 [60.0]3.25 [82.6]
3.54 [90.0]
Ø0.41 [10.5]TYP
Ø0.44 [11.2]TYP
3.25 [82.6] 2.25 [57.2]
0.50 [12.7]
1.25 [31.8]TYP
3.50 [88.9]
0.50 [12.7]
4.00
0.81
1.63
1.41 TYP0.12
1.41 TYP
1.63
0.81
4.00
SPACERSDrawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted
Most spacers are etched on the side with thickness
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 56
DSCP086 Series SpacersDSC Part No. Thickness Other part numbers
3.00mm..........4.00mm..........5.00mm..........6.00mm..........7.00mm..........8.00mm..........
DSCP086-M300..........DSCP086-M400..........DSCP086-M500..........DSCP086-M600..........DSCP086-M700..........DSCP086-M800..........
D101044D101045D101046D101047D101048D101049
DSC Part No. Thickness Other part #sDSCP087 Series SpacersDSC Part No. Thickness Other part #s
3.00mm..........3.20mm..........3.40mm..........3.60mm..........3.80mm..........4.00mm..........4.20mm..........4.40mm..........4.60mm..........4.80mm..........5.00mm..........5.20mm..........5.40mm..........5.60mm..........5.80mm..........6.00mm..........6.20mm..........
DSCP087-M300..........DSCP087-M320..........DSCP087-M340..........DSCP087-M360..........DSCP087-M380..........DSCP087-M400..........DSCP087-M420..........DSCP087-M440..........DSCP087-M460..........DSCP087-M480..........DSCP087-M500..........DSCP087-M520..........DSCP087-M540..........DSCP087-M560..........DSCP087-M580..........DSCP087-M600..........DSCP087-M620..........
ACS630SACS632SACS634SACS636SACS638SACS640SACS642SACS644SACS646SACS648SACS650SACS652SACS654SACS656SACS658SACS660SACS662S
DSCP087-M640..........DSCP087-M660..........DSCP087-M680..........DSCP087-M700..........
6.40mm..........6.60mm..........6.80mm..........7.00mm..........
ACS664SACS666SACS668SACS670S
DSCP088 Series SpacersDSC Part No. Thickness Other part numbers
.25 inch..........DSCP088-E250.......... D113069
.25 inch..........
DSCP089 Series SpacersDSC Part No. Thickness Other part numbersDSCP089-E250.......... D113070
Ø0.41 [10.4]TYP 2.00 [50.8]
1.00 [25.4]
0.50 [12.7] 1.00 [25.4]
0.50 [12.7]
Ø0.56 [14.2]TYP
Ø0.56 [14.2]TYP
4.50 [114.3]
0.75 [19.1] 3.00 [76.2]
1.50 [38.1]
0.75 [19.1]
4.00 [101.6]2.50 [63.5]0.75 [19.1]
1.50 [38.1]
0.75 [19.1]
SPACERSDrawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted
Ø0.41[10.5]TYP
0.79 [20.0]
2.76 [70.0]
4.33 [110.0]
0.79 [20.0] 1.38 [35.0] TYP
4.33 [110.0]
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 57
.25 inch..........
DSCP090 Series SpacersDSC Part No. Thickness Other part numbersDSCP090-E250.......... D113071
.25 inch..........
DSCP091 Series SpacersDSC Part No. Thickness Other part numbersDSCP091-E250.......... D113072
Ø0.56 [14.2]TYP
1.50 [38.1]
0.75 [19.1] 3.50 [88.9]
5.00 [127.0]
0.75 [19.1]
Ø0.56 [14.2]TYP
0.75 [19.1]
7.50 [190.5]
9.00 [228.6]
0.75 [19.1]
1.50 [38.1]
SPACERS and RETAINERSDrawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted
.39 [10]
1.18 [30] 1.97 [50]
2.36 [60]
1.18 [30]Ø.41 [10.5]
DSC Part No. Thickness Other part #sDSCP092 Series SpacersDSC Part No. Thickness Other part #s
0.25mm..........0.50mm..........1.00mm..........2.00mm..........3.00mm..........3.20mm..........3.40mm..........3.60mm..........3.80mm..........4.00mm..........4.20mm..........4.40mm..........4.60mm..........4.80mm..........5.00mm..........5.20mm..........5.40mm..........
DSCP092-M025..........DSCP092-M050..........DSCP092-M100..........DSCP092-M200..........DSCP092-M300..........DSCP092-M320..........DSCP092-M340..........DSCP092-M360..........DSCP092-M380..........DSCP092-M400..........DSCP092-M420..........DSCP092-M440..........DSCP092-M460..........DSCP092-M480..........DSCP092-M500..........DSCP092-M520..........DSCP092-M540..........
DSCP092-M560..........DSCP092-M580..........DSCP092-M600..........DSCP092-M620..........DSCP092-M640..........DSCP092-M660..........DSCP092-M680..........DSCP092-M700..........
ASP230NASP232NASP234NASP236NASP238NASP240NASP242NASP244NASP246NASP248NASP250NASP252NASP254N
ASP256NASP258NASP260NASP262NASP264NASP266NASP268NASP270N
5.60mm..........5.80mm..........6.00mm..........6.20mm..........6.40mm..........6.60mm..........6.80mm..........7.00mm..........
DSC Part No. Thickness Other part #sDSCP093 Series SpacersDSC Part No. Thickness Other part #s
0.25mm..........0.50mm..........1.00mm..........2.00mm..........3.00mm..........3.20mm..........3.40mm..........3.60mm..........3.80mm..........4.00mm..........4.20mm..........4.40mm..........4.60mm..........4.80mm..........5.00mm..........5.20mm..........5.40mm..........
DSCP093-M025..........DSCP093-M050..........DSCP093-M100..........DSCP093-M200..........DSCP093-M300..........DSCP093-M320..........DSCP093-M340..........DSCP093-M360..........DSCP093-M380..........DSCP093-M400..........DSCP093-M420..........DSCP093-M440..........DSCP093-M460..........DSCP093-M480..........DSCP093-M500..........DSCP093-M520..........DSCP093-M540..........
DSCP093-M560..........DSCP093-M580..........DSCP093-M600..........DSCP093-M620..........DSCP093-M640..........DSCP093-M660..........DSCP093-M680..........DSCP093-M700..........
ASP730NASP732NASP734NASP736NASP738NASP740NASP742NASP744NASP746NASP748NASP750NASP752NASP754N
ASP756NASP758NASP760NASP762NASP764NASP766NASP768NASP770N
5.60mm..........5.80mm..........6.00mm..........6.20mm..........6.40mm..........6.60mm..........6.80mm..........7.00mm..........
.79 [20]
1.58 [40]
1.18 [30] 2.36 [60]
2.24 [57]
2.99 [76]
Ø1.65 [42]
Ø.35 [9]
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 58
.18 inch..........
DSCR001 Series RetainersDSC Part No. Thickness Other part numbersDSCR001-E180.......... M 1077
.18 inch..........
DSCR003 Series RetainersDSC Part No. Thickness Other part numbersDSCR003-E180.......... M 1309
.18 inch..........
DSCR002 Series RetainersDSC Part No. Thickness Other part numbersDSCR002-E180.......... M 1080
Ø0.50 [12.7]
Ø0.28 [7.1](2) PLCS
1.25 [31.8]
2.00 [50.8]
0.38 [9.5]
0.38 [9.5]
0.25 [6.4]
0.75 [19.1]0.75 [19.1]
Ø0.53 [13.5]TYP
4.00 [101.6]
0.75 [19.1]
2.00 [50.8]1.00 [25.4]
1.50 [38.1]
R1.00 [25.4]
Ø0.56 [14.2]TYP
3.50 [88.9]
2.26 [57.4]
0.63 [15.9]
1.25 [31.8]
0.63 [15.9]
0.25 [6.4]
RETAINERSDrawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted
.75 [10.1]
Genuine DSC is Made in USAThe "DSC" prefixing our part numbers stands for Douglas Stamping Company. GenuineDSC components purchased from us are manufactured in the U.S.A., in the DetroitMetropolitan region.
We are aware of other companies selling sub-standard and imported shim, spacer andwasher substitutes using our part numbers. You may be assured that DSC componentspurchased from us and from our qualified re-sellers are genuine.
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 59
0.250 ............0.312 ............0.312 ............0.312 ............0.250 ............0.250 ............
DSCR004 Series Serrated Retainer Plates (dimensions in inches)DSC Part No. A dim B dim C dim D dim E dim F dim Thickness Other part numbersDSCR004-E250..........DSCR005-E312..........DSCR006-E312..........DSCR007-E312..........DSCR008-E250..........DSCR009-E250..........
FSD 3399FSD 3850FSD 3851FSD 399956ZM 2359-156ZM 2359-6
0.03
90°
B
DC
A
Ø FTYP
E
2.00 .........3.25 .........2.25 .........3.50 .........2.50 .........2.25 .........
1.50 .........2.00 .........1.38 .........2.00 .........1.50 .........1.38 .........
1.00 .........2.00 .........1.12 .........2.00 .........1.50 .........1.13 .........
0.50 ........0.62 ........0.56 ........0.75 ........0.50 ........0.56 ........
0.75 ........1.00 ........0.69 ........1.00 ........0.75 ........0.69 ........
0.531 ..........0.687 ..........0.687 ..........0.812 ..........0.625 ..........0.562 ..........
DSCK001 Series KeeperDSC Part No. Thickness Other part numbers
DSCK002 Series KeeperDSC Part No. Thickness Other part numbers
DSCK001-E125.......... .125 inch........ FSD 34572-51 DSCK002-E125.......... .125 inch........ FSD 34572-52
.125 inch........
DSCK003 Series Keeper with 516-18 SHCS
DSC Part No. Thickness Other part numbersDSCK003-E125.......... 56ZM 2479-1 .125 inch.......
DSCK004 Series KeeperDSC Part No. Thickness Other part numbersDSCK004-E125.......... WG 1969-51
0.501.00
0.50
1.00
Ø0.34
0.31 0.63
0.50
1.00
1.25
Ø0.34TYP
0.631.25
0.31
1.00
Ø0.34
1.63
1.001.25
0.31 1.00
Ø0.28TYP
Heat treated to Rockwell C 32-35
RETAINERS and KEEPERSDrawings are not to scale Slots and holes are centered unless otherwise noted
.50mm
.10mm
.20mm
.20mm
.50 mm
.50mm
1.0 m
m3.
0 mm
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 60
DSCK005 Series Keepers (painted)DSC Part No. Thickness Other part numbersDSCK005-E125.......... WG 1969-51 REV '2'.125 inch........
6.0........8.0........10.0......12.0......14.0......
DSCB00X Series Insulating BushingsDSC Part No. ID mmOD mm Other part numbersDSCB001-M0XX........DSCB002-M0XX........DSCB003-M0XX........DSCB004-M0XX........DSCB005-M0XX........
FSD 41404-51-XXFSD 41404-52-XXFSD 41404-53-XXFSD 41404-54-XXFSD 41404-55-XX
0.10mm..........0.20mm..........0.25mm..........0.50mm..........1.00mm..........1.20mm..........1.50mm..........2.00mm..........3.00mm..........4.00mm..........
DSCF001 Series Feeler GagesDSC Part No. Thickness Other part numbersDSCF001-M010..........DSCF001-M020..........DSCF001-M025..........DSCF001-M050..........DSCF001-M100..........DSCF001-M120..........DSCF001-M150..........DSCF001-M200..........DSCF001-M300..........DSCF001-M400..........
FSD30337-010FSD30337-020FSD30337-025FSD30337-050FSD30337-100FSD30337-120FSD30337-150FSD30337-200FSD30337-300FSD30337-400
9.00mm..........
DSCF002 Series Feeler Gage SetDSC Part No. Total thickness ComponentsDSCF002-M909.......... (1) 0.10mm, (2) 0.20mm, (3) 0.50mm,
(1) 1.00mm, (2) 3.00mm
0.31 1.00
1.63
0.75
1.251.38
0.28TYP
2.74
0.50 0.24
Ø0.22
Feeler Gages can be made to your specifications, as individual blades or assembled onto aring or into a case as below. Steel blades are etched with thickness. Stock thickness areindicated above. Several thicknesses are also available in plastic. Please call to discuss yourspecific needs.
Custom feeler gage stackups andassemblies are available.
KEEPERS, TEST COUPONS, FEELER GAGESDrawings are not to scale Slots and holes are centered unless otherwise noted
9.0........11.0......13.0......15.0......17.0......
These bushings are made from phenolic tubing, where the XX designates the length inmillimeters. We are also happy to sell the uncut phenolic tubing.
Legacy Part Number .......... FSD 30337
2014
DSCD Series Weld WashersDSC Part No. I.D. O.D. Flat to Center Thickness Material/Plating Other part numbers
DSCD001-E125..........DSCD002-E125..........DSCD003-E250..........DSCD004-E140..........DSCD005-E140..........DSCD006-E140..........DSCD007-E190..........DSCD008-E190..........DSCD009-E190..........DSCD010-E190..........DSCD011-E250..........DSCD018-E310..........DSCD012-E190..........DSCD013-E250..........DSCD014-E250..........DSCD015-E250..........DSCD016-E250..........DSCD017-E310..........DSCD101-M300..........DSCD102-M300..........DSCD103-M300..........DSCD104-M300..........DSCD105-M300..........DSCD106-M300..........DSCD107-M400..........DSCD108-M400..........DSCD109-M480..........DSCD110-M635..........
DSC-D-14DSC-D-51656ZF24981-3856ZM 2359-2, DSC-D-38FSD 14102FSD 14102SS56ZM 2359-3, DSC-D-12FSD 14103FSD 14103SSFSD 14103Z56ZF24981-12P111005DSC-D-5856ZF24981-5856ZF24981-34FSD 14239, DSC-D-34DSC-D-78DSC-D-100FSD 41341, DSC-D-M6DSC-D-M6PFSD 41342, DSC-D-M8DSC-D-M8PFSD 41343, DSC-D-M10DSC-D-M10PFSD 41344, DSC-D-M12DSC-D-M12PDSC-D-M16DSC-D-M20
0.25 inch.......0.31 inch.......0.38 inch.......0.38 inch.......0.38 inch.......0.38 inch.......0.50 inch.......0.50 inch.......0.50 inch.......0.50 inch.......0.50 inch.......0.50 inch.......0.63 inch.......0.63 inch.......0.75 inch.......0.75 inch.......0.88 inch.......1.00 inch.......6.4mm...........6.4mm...........8.1mm...........8.1mm...........10.1mm.........10.1mm.........12.1mm.........12.1mm.........16.7mm.........20.3mm.........
O.D.I.D.
Flatto
Center
0.75 inch........0.88 inch........1.00 inch........1.00 inch........1.00 inch........1.00 inch........1.25 inch........1.25 inch........1.25 inch........1.25 inch........1.25 inch........1.38 inch........1.38 inch........1.50 inch........1.50 inch........1.50 inch........1.75 inch........2.00 inch........19.0mm..........19.0mm..........22.4mm..........22.4mm..........25.4mm..........25.4mm..........31.8mm..........31.8mm..........38.1mm..........44.5mm..........
0.25 inch............0.31 inch............0.38 inch............0.38 inch............0.38 inch............0.38 inch............0.38 inch............0.38 inch............0.50 inch............0.50 inch............0.50 inch............0.50 inch............0.50 inch............0.50 inch............0.56 inch............0.63 inch............0.63 inch............0.69 inch............6.4mm................6.4mm................8.0mm................8.0mm................10.0mm..............10.0mm..............12.0mm..............12.0mm..............15.0mm..............19.0mm..............
0.13 inch...........0.13 inch...........0.25 inch...........0.14 inch...........0.14 inch...........0.14 inch...........0.19 inch...........0.19 inch...........0.19 inch...........0.19 inch...........0.25 inch...........0.31 inch...........0.19 inch...........0.25 inch...........0.25 inch...........0.25 inch...........0.25 inch...........0.31 inch...........3.0mm...............3.0mm...............3.0mm...............3.0mm...............3.0mm...............3.0mm...............4.0mm...............4.0mm...............4.8mm...............6.4mm...............
steel......................steel......................steel......................steel......................steel......................stainless................steel......................steel......................stainless................steel/zinc...............steel......................steel......................steel......................steel......................steel......................steel......................steel......................steel......................steel......................phenolic.................steel......................phenolic.................steel......................phenolic.................steel......................phenolic.................steel......................steel......................
.16
O.D.
I.D.
.025
90°
DSCS Series Serrated Washers (dimensions in inches)DSC Part No. I.D. O.D. Thickness Material Other part numbers
steel.........steel.........steel.........steel.........steel.........
0.62 ..............0.75 ..............0.88 ..............1.00 ..............1.25 ..............
0.16 ..................0.16 ..................0.16 ..................0.16 ..................0.16 ..................
DSCS001-E160..........DSCS002-E160..........DSCS003-E160..........DSCS004-E160..........DSCS005-E160..........
0.27 .............0.33 .............0.39 .............0.52 .............0.64 .............
FSD 14040-3FSD 14040-4FSD 14040-5FSD 14040-1FSD 14040-2
These serrated washers are heat treatedRockwell C 40-44 and black oxided.
B
A
.88
DSCY Series Links (dimensions in inches)DSC Part No. A B length Thickness Material Other part numbers
2.50 .............3.00 .............1.88 .............2.75 .............2.38 .............3.88 .............3.25 .............2.12 .............
DSCY001-E250..........DSCY002-E250..........DSCY003-E250..........DSCY004-E250..........DSCY005-E250..........DSCY006-E250..........DSCY007-E250..........DSCY008-E250..........
0.25 ..................0.25 ..................0.25 ..................0.25 ..................0.25 ..................0.25 ..................0.25 ..................0.25 ..................
3.38 ..............3.88 ..............2.75 ..............3.62 ..............3.25 ..............4.75 ..............4.12 ..............3.00 ..............
WG-8357-51WG-8357-52WG-8357-53WG-8357-54WG-8357-55WG-8357-56WG-8357-57WG-8357-58
steel.........steel.........steel.........steel.........steel.........steel.........steel.........steel.........
WELD WASHERS, SERRATED WASHERS, LINKSDrawings are not to scale Slots and holes are centered unless otherwise noted
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 61
.501 ± .001
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 62
0.21 .............0.21 .............0.38 .............0.38 .............0.39 .............0.41 .............0.41 .............0.42 .............0.44 .............0.47 .............0.50 .............0.50 .............0.50 .............0.50 .............0.50 .............0.50 .............0.50 .............0.50 .............0.51 .............0.53 .............0.53 .............0.53 .............0.53 .............0.54 .............0.54 .............0.54 .............0.54 .............0.54 .............0.54 .............0.55 .............0.55 .............0.55 .............0.56 .............0.56 .............0.65 .............0.65 .............0.65 .............0.65 .............0.65 .............0.65 .............0.66 .............0.66 .............0.66 .............0.67 .............0.76 .............0.78 .............0.78 .............0.81 .............0.81 .............0.81 .............0.81 .............0.81 .............0.81 .............0.88 .............0.90 .............0.94 .............0.94 .............0.94 .............0.94 .............0.94 .............0.94 .............1.00 .............1.00 .............1.00 .............1.00 .............1.00 .............1.00 .............1.00 .............1.01 .............1.02 .............1.02 .............1.03 .............1.03 .............1.03 .............1.06 .............1.06 .............1.21 .............1.24 .............1.24 .............1.24 .............1.24 .............1.24 .............1.24 .............1.25 .............1.25 .............1.25 .............1.25 .............1.25 .............
DSCW Series Inch Steel WashersDSC Part No. I.D. O.D. Thickness Notes/Other part numbersDSCW001-E060.........DSCW002-E100.........DSCW003-E130.........DSCW004-E130.........DSCW005-E190.........DSCW006-E100.........DSCW007-E100.........DSCW008-E130.........DSCW009-E130.........DSCW010-E190.........DSCW011-E002.........DSCW012-E005.........DSCW013-E032.........DSCW014-E010.........DSCW015-E003.........DSCW016-E015.........DSCW017-E380.........DSCW019-E380.........DSCW020-E190.........DSCW021-E100.........DSCW022-E130.........DSCW023-E190.........DSCW024-E380.........DSCW025-E060.........DSCW026-E160.........DSCW027-E160.........DSCW028-E160.........DSCW029-E160.........DSCW030-E160.........DSCW031-E130.........DSCW032-E130.........DSCW033-E120.........DSCW034-E500.........DSCW035-E200.........DSCW036-E060.........DSCW037-E250.........DSCW038-E090.........DSCW039-E090.........DSCW040-E090.........DSCW041-E090.........DSCW042-E130.........DSCW043-E120.........DSCW044-E120.........DSCW045-E200.........DSCW046-E120.........DSCW047-E130.........DSCW048-E190.........DSCW049-E150.........DSCW050-E320.........DSCW051-E010.........DSCW052-E002.........DSCW053-E003.........DSCW054-E005.........DSCW055-E130.........DSCW056-E210.........DSCW057-E002.........DSCW058-E015.........DSCW059-E003.........DSCW060-E032.........DSCW061-E005.........DSCW062-E010.........DSCW063-E010.........DSCW064-E015.........DSCW065-E032.........DSCW066-E005.........DSCW067-E003.........DSCW068-E002.........DSCW069-E120.........DSCW070-E060.........DSCW071-E150.........DSCW072-E150.........DSCW073-E190.........DSCW074-E130.........DSCW075-E190.........DSCW076-E120.........DSCW077-E250.........DSCW078-E040.........DSCW079-E005.........DSCW080-E010.........DSCW081-E003.........DSCW082-E002.........DSCW083-E015.........DSCW084-E032.........DSCW085-E032.........DSCW086-E015.........DSCW087-E003.........DSCW088-E005.........DSCW089-E010.........
0.06 ...................0.10 ...................0.13 ...................0.13 ...................0.19 ...................0.10 ...................0.10 ...................0.13 ...................0.13 ...................0.19 ...................0.002 .................0.005 .................0.032 .................0.010 .................0.003 .................0.015 .................0.38 ...................0.38 ...................0.19 ...................0.10 ...................0.13 ...................0.19 ...................0.38 ...................0.06 ...................0.16 ...................0.16 ...................0.16 ...................0.13 ...................0.13 ...................0.12 ...................0.50 ...................0.20 ...................0.06 ...................0.13 ...................0.09 ...................0.25 ...................0.09 ...................0.09 ...................0.09 ...................0.09 ...................0.13 ...................0.12 ...................0.12 ...................0.20 ...................0.12 ...................0.13 ...................0.19 ...................0.15 ...................0.32 ...................0.01 ...................0.002 .................0.003 .................0.005 .................0.13 ...................0.21 ...................0.002 .................0.015 .................0.003 .................0.032 .................0.005 .................0.01 ...................0.01 ...................0.015 .................0.032 .................0.005 .................0.003 .................0.002 .................0.12 ...................0.06 ...................0.15 ...................0.15 ...................0.19 ...................0.13 ...................0.19 ...................0.12 ...................0.25 ...................0.04 ...................0.005 .................0.01 ...................0.003 .................0.002 .................0.015 .................0.032 .................0.032 .................0.015 .................0.003 .................0.005 .................0.01 ...................
0.50 ..............0.62 ..............1.00 ..............1.00 ..............0.75 ..............0.75 ..............0.81 ..............1.24 ..............1.75 ..............1.92 ..............0.88 ..............0.88 ..............0.88 ..............0.88 ..............0.88 ..............0.88 ..............1.25 ..............2.13 ..............1.38 ..............0.88 ..............1.00 ..............1.25 ..............1.50 ..............0.81 ..............1.18 ..............1.18 ..............1.18 ..............1.50 ..............2.00 ..............0.81 ..............1.06 ..............1.06 ..............1.75 ..............1.25 ..............1.50 ..............1.50 ..............1.62 ..............1.75 ..............2.50 ..............1.97 ..............1.25 ..............2.00 ..............2.25 ..............1.25 ..............1.50 ..............1.25 ..............1.50 ..............1.00 ..............1.00 ..............1.00 ..............1.00 ..............1.00 ..............1.50 ..............1.38 ..............1.50 ..............1.38 ..............1.38 ..............1.38 ..............1.38 ..............1.38 ..............1.25 ..............1.25 ..............1.25 ..............1.25 ..............1.25 ..............1.25 ..............1.25 ..............1.71 ..............1.75 ..............1.38 ..............1.38 ..............1.88 ..............2.00 ..............2.00 ..............1.50 ..............2.50 ..............1.75 ..............1.62 ..............1.62 ..............1.62 ..............1.62 ..............1.62 ..............1.62 ..............1.50 ..............1.50 ..............1.50 ..............1.50 ..............1.50 ..............
FSD 36577FSD 1431256ZM 2359-9STD 40-4WG1104-51FSD 14184FSD 14150FSD 14120FSD 14101-11493919WG 521-76-AWG 521-76-CWG 521-76-FWG 521-76-DWG 521-76-BWG 521-76-E56ZM 2359-7FSD 14162STD-40-9FSD 14151STD 40-2FSD 14128FSD 14083FSD 14013FSD 14010602289941-12-839-01FSD 14121FSD 14121-52FSD 14126FSD 14125FSD 14123FSD 14014FSD 14101-2FSD 14119FSD 14091FSD 32789FSD 32788CL 145-60CL 146-54STD 40-1WG1442-53WG1211-53FSD 14124CL 127-60STD 40-3STD 40-7WG 629-59-EWG 629-59-FWG 629-59-DWG 629-59-AWG 629-59-BWG 629-59-CFSD 14182CL 124-51WG 2416-53-AWG 2416-53-EWG 2416-53-BWG 2416-53-FWG 2416-53-CWG 2416-53-DWG 521-75-DWG 521-75-EWG 521-75-FWG 521-75-CWG 521-75-BWG 521-75-AFSD 14163WG753-51WT140X-56FSD 14170WG308-51CL 159-58STD 40-5WG802-51STD 40-8WG1064-52WG 2416-65-CWG 2416-65-DWG 2416-65-BWG 2416-65-AWG 2416-65-EWG 2416-65-FWG 2416-57-FWG 2416-57-EWG 2416-57-BWG 2416-57-CWG 2416-57-D
O.D.I.D.
WG 2416-57-AWT134-57WG786-51WG921-51WG1370-51STD 40-6WG840-51WG780-51WG1064-51WG 2416-61-BWG 2416-61-FWG 2416-61-CWG 2416-61-DWG 2416-61-AWG 2416-61-EWG 642-51-FWG 642-51-CWG 642-51-EWG 642-51-AWG 642-51-BWG 642-51-DWG1511-51WG 522-54-AWG 522-54-FWG 522-54-CWG 522-54-EWG 522-54-BWG 522-54-DWG787-51WG922-51WG577-51WG929-51WG 2507-54-AWG 2507-54-DWG 2507-54-CWG 2507-54-BWG 2507-54-FWG 2507-54-EWG790-51WG970-51WG980-51WG923-51WG1080-51WG2416-59-AWG2416-59-DWG2416-59-BWG2416-59-FWG2416-59-CWG2416-59-E
0.002 .................0.06 ...................0.12 ...................0.12 ...................0.12 ...................0.19 ...................0.12 ...................0.12 ...................0.04 ...................0.003 .................0.032 .................0.005 .................0.01 ...................0.002 .................0.015 .................0.032 .................0.005 .................0.015 .................0.002 .................0.003 .................0.01 ...................0.12 ...................0.002 .................0.032 .................0.005 .................0.015 .................0.003 .................0.01 ...................0.12 ...................0.12 ...................0.06 ...................0.12 ...................0.002 .................0.01 ...................0.005 .................0.003 .................0.032 .................0.015 .................0.12 ...................0.12 ...................0.12 ...................0.12 ...................0.12 ...................0.002 .................0.01 ...................0.003 .................0.032 .................0.005 .................0.015 .................
1.50 ..............1.75 ..............1.75 ..............1.75 ..............2.00 ..............2.25 ..............2.00 ..............2.25 ..............1.75 ..............1.82 ..............1.82 ..............1.82 ..............1.82 ..............1.82 ..............1.82 ..............1.94 ..............1.94 ..............1.94 ..............1.94 ..............1.94 ..............1.94 ..............2.25 ..............1.81 ..............1.81 ..............1.81 ..............1.81 ..............1.81 ..............1.81 ..............2.25 ..............2.75 ..............2.38 ..............2.75 ..............1.94 ..............1.94 ..............1.94 ..............1.94 ..............1.94 ..............1.94 ..............2.25 ..............2.50 ..............2.50 ..............2.75 ..............3.00 ..............3.94 ..............3.94 ..............3.94 ..............3.94 ..............3.94 ..............3.94 ..............
1.25 .............1.25 .............1.25 .............1.25 .............1.28 .............1.28 .............1.31 .............1.38 .............1.40 .............1.50 .............1.50 .............1.50 .............1.50 .............1.50 .............1.50 .............1.50 .............1.50 .............1.50 .............1.50 .............1.50 .............1.50 .............1.54 .............1.56 .............1.56 .............1.56 .............1.56 .............1.56 .............1.56 .............1.62 .............1.62 .............1.66 .............1.66 .............1.75 .............1.75 .............1.75 .............1.75 .............1.75 .............1.75 .............1.94 .............1.94 .............1.94 .............1.94 .............1.97 .............3.25 .............3.25 .............3.25 .............3.25 .............3.25 .............3.25 .............
DSCW090-E002.........DSCW091-E060.........DSCW092-E120.........DSCW093-E120.........DSCW094-E120.........DSCW095-E190.........DSCW096-E120.........DSCW097-E120.........DSCW098-E040.........DSCW099-E003.........DSCW100-E032.........DSCW101-E005.........DSCW102-E010.........DSCW103-E002.........DSCW104-E015.........DSCW105-E032.........DSCW106-E005.........DSCW107-E015.........DSCW108-E002.........DSCW109-E003.........DSCW110-E010.........DSCW111-E120.........DSCW112-E002.........DSCW113-E032.........DSCW114-E005.........DSCW115-E015.........DSCW116-E150.........DSCW117-E010.........DSCW118-E120.........DSCW119-E120.........DSCW120-E060.........DSCW121-E120.........DSCW122-E002.........DSCW123-E010.........DSCW124-E005.........DSCW125-E003.........DSCW126-E032.........DSCW127-E015.........DSCW128-E120.........DSCW129-E120.........DSCW130-E120.........DSCW131-E120.........DSCW132-E120.........DSCW133-E002.........DSCW134-E010.........DSCW135-E003.........DSCW136-E032.........DSCW137-E005.........DSCW138-E015.........
DSC Part No. I.D. O.D. Thickness Notes/Other part numbers
DSCW Series Metric Steel WashersDSC Part No. I.D. O.D. Thickness Notes/Other part numbersDSCW301-E060.........DSCW302-E100.........DSCW303-E130.........DSCW304-E130.........DSCW305-E190.........DSCW306-E100.........DSCW307-E100.........DSCW308-E130.........DSCW309-E130.........DSCW310-E190.........
5.6 ...............6.7 ...............9.0 ...............11.0 .............13.4 .............17.3 .............22.0 .............25.8 .............32.7 .............38.6 .............
14.8 ..............18.6 ..............24.9 ..............27.7 ..............33.7 ..............43.7 ..............49.7 ..............55.4 ..............70.4 ..............89.3 ..............
1.4 .....................1.4 .....................1.9 .....................2.4 .....................3.0 .....................3.5 .....................4.0 .....................4.5 .....................5.0 .....................5.7 .....................
F610515F610618F610825F611028F611234F611644F612050F612456F613072F613690
We will make any washer, in anyquantity and size, from anymaterial. Call us with yourrequirements!
WASHERSDrawings are not to scale Slots and holes are centered unless otherwise noted
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 63
O.D.I.D.
phenolic.....phenolic.....nylon..........phenolic.....phenolic.....phenolic.....nylon..........nylon..........phenolic.....nylon..........phenolic.....phenolic.....phenolic.....phenolic.....phenolic.....
DSCW Series Insulating Washers
0.06 inch.....0.13 inch.....0.13 inch.....0.13 inch.....0.09 inch.....0.13 inch.....0.09 inch.....0.13 inch.....0.09 inch.....0.12 inch.....0.06 inch.....3.0 mm........3.0 mm........3.0 mm........3.0 mm........
1.00 inch........1.00 inch........1.25 inch........1.25 inch........1.25 inch........1.25 inch........1.38 inch........1.50 inch........1.63 inch........4.75 inch........2.13 inch........20.0 mm.........24.0 mm.........29.0 mm.........35.0 mm.........
0.38 inch.......0.42 inch.......0.51 inch.......0.53 inch.......0.65 inch.......0.65 inch.......0.78 inch.......0.89 inch.......0.90 inch.......1.40 inch.......1.50 inch.......7.0 mm..........8.0 mm..........10.0 mm........13.0 mm........
DSCW501-E060.........DSCW502-E130.........DSCW503-E125.........DSCW504-E130.........DSCW505-E090.........DSCW506-E130.........DSCW507-E090.........DSCW508-E130.........DSCW509-E090.........DSCW513-E120.........DSCW514-E060.........DSCW601-M300.........DSCW602-M300.........DSCW603-M300.........DSCW604-M300.........
WG 6561-51WG 9132-5156ZF3102824BWG 9134-51WG 9237-51WG 9053-51
CL 63-61WG 9239-51WG 8412-51CL 63-62FSD 41405-51FSD 41405-52FSD 41405-53FSD 41405-54
13.2 .............17.7 .............25.0 .............22.4 .............26.4 .............33.2 .............41.2 .............43.2 .............49.2 .............55.2 .............59.2 .............71.2 .............
7.0 ...............9.0 ...............10.2 .............11.0 .............14.0 .............18.0 .............22.0 .............24.0 .............26.0 .............30.0 .............33.0 .............39.0 .............
DSCW701-E060.........DSCW702-E130.........DSCW703-E130.........DSCW704-E090.........DSCW705-E130.........DSCW706-E090.........DSCW707-E130.........DSCW708-E090.........DSCW709-E090.........DSCW710-E120.........DSCW711-E015.........DSCW712-E120.........
steel, Rc 38-45.........steel, Rc 38-45.........steel, Rc 38-45*........steel, Rc 38-45.........steel, ASTM F436M..steel, ASTM F436M..steel, ASTM F436M..steel, ASTM F436M..steel, ASTM F436M..steel, ASTM F436M..steel, ASTM F436M..steel, ASTM F436M..
F620614F620818F621025F621022F621227F621634F622042F622244F622450F622756F623060F623672
3.4 .............3.4 .............4.5 .............3.4 .............3.9 .............3.9 .............3.9 .............4.0 .............4.0 .............4.0 .............4.0 .............4.0 .............
DSCW Series Heat Treated Metric Washers
L-BLOCKS, STOP BLOCKS, PINS, PIN RETAINERS, ROUGHLOCATORS, STUB SHAFTS and other components are availablefrom Douglas Stamping Company. We provide these details toNAAMS, FORD, GM, Chrysler and other current and obsoletespecifications.
Below is a partial listing of the NAAMS part numbers available. Mostof the items are available in either Metric or English (inch) dimensions.Metric is usually designated by an 'M' suffix. English either uses an 'E'suffix or no suffix.
AAB100 - AAB401ACA001 - ACA223ADP201 - ADP502AHB001 - AHB002ALB010 - ALB281APE061 - APE250APR010 - APR071APS061 - APS250ARA450 - ARA801ARE061 - ARE190ARL075 - ARL320ARP061 - ARP250ASC020 - ASC091ASF020 - ASF091FSD, FS, CSS
*1020 HRS, carb & harden 1.0 deep 38-45 Rc
Riser Angle BracketPower Clamp ArmDump Unit Stub Shaft and SpacerRiser Angle BracketL-BlockLocating PinLocating Pin RetainerLocating PinRiser Angle BracketLocating PinRough LocatorsLocating PinCrowned Stop BlockFlat Stop BlockAll stub shafts, stop blocks, Lblocks and washers
INSULATING WASHERS, NAAMS COMPONENTS, MISCELLANEOUSDrawings are not to scale Slots and holes are centered unless otherwise noted
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 64
NAAMS RISER ANGLE BRACKETSSeriesAABARAAHB
English andMetric
NAAMS DIE LIFT PIN WITH SPRINGRETAINER RINGSeries
NAAMS ROUGH LOCATORSSeries
L01ARLARL P (with UHMW wear plate)
NAAMS STOP BLOCKSSeriesASCASF
NAAMS SCRAP CHUTE CHAIN HOOKSSeriesM03
NAAMS ASSEMBLY and STAMPING COMPONENTSDrawings are not to scale Slots and holes are centered unless otherwise noted
NAAMS and FSD DUMP UNITCOMPONENTSSeriesADP Shafts, Bearings, Spacers and KeepersFSD Shafts
NAAMS components are part of the Auto Steel Partnership standard. Forengineering details and specific part numbers, please reference the GlobalAssembly and Stamping standards:http://naamsstandards.org
2014
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]
Page 65
NAAMS LOCATING PIN AND RETAINER COMPONENTSAND ASSEMBLIESSeriesAPR Pin RetainersAPS Locating PinsAPE Locating PinsARP Respot PinsARE Respot PinsAPQ Locating PinsAPS Retractable Locating PinsAPE Retractable Locating PinsARP Retr. Respot PinsARE Retr. Respot PinsAPQ Retr. Locating Pins
Full line of L-blocks, T-blocks, fasteners,washers, shims and spacers
NAAMS, FS and FSD L and T BLOCKSSeries
NAAMS NC BLOCK BLANKSSeries
ALBFS 15FSD
ANIANLANR
NAAMS PUNCHES/DIE BUTTONS &COMPONENTSSeriesP SeriesBall Lock RetainersBacking and Retaining PlatesPunch StrippersBall Lock PunchesDie ButtonsBall Lock Ejector Punches
NAAMS TOOLING BALLSSeriesM01
NAAMS ASSEMBLY and STAMPING COMPONENTSDrawings are not to scale Slots and holes are centered unless otherwise noted
NAAMS CAM DWELL WEAR PLATESSeriesW111W211W311
NAAMS TRUNION BLOCKSSeriesACT
IndexPart Number DSC Ref, Page Part Number DSC Ref, Page Part Number DSC Ref, Page11-38D 336 065 DSCH113 33 AAB Riser 64 CSS 48 DSCH088 27
11-38D 336 066 DSCH114 33 ACA001 thru 223 63 CSS 510 DSCH095 29
11-38D 495 551 DSCH115 34 ACH600 thru 620 DSCH044 15 CSS 512 DSCH096 29
125187 DSCH023 10 ACS330S thru 370S DSCP034 45 CSS 66 DSCH089 27
1493919 DSCW010 62 ACS630 thru 670 DSCP035 46 CSS 812 DSCH097 29
3 193 188 thru 191 DSCH123 36 ACS630S thru 670S DSCP087 56 CSS 88 DSCH090 27
3 193 192 thru 195 DSCH124 36 65 CSS 89 DSCH091 28
3 193 196 thru 199 DSCH125 36 ADP Stub Shaft 64 CSS 99 DSCH092 28
3 699 4XX DSCH116 34 AHB Riser 64 D101044 thru 049 DSCP086 56
41-12-839-01 DSCW028 62 ALB L-Block 65 D113022 thru 115 DSCP084 55
41-502-1901 thru 1916 DSCP028 44 ANI NC Block 65 D113063 DSCH107 32
41-502-1921 thru 1936 DSCP029 44 ANL NC Block 65 D113064 DSCH108 32
41-502-1941 thru 1956 DSCP030 44 ANR NC Block 65 D113065 DSCH0109 32
41-502-1960 thru 1976 DSCP031 45 APE Locating Pin 65 D113066 DSCH110 32
41-502-2200 thru 2220 DSCP050 50 65 D113069 DSCP088 56
41-502-2221 thru 2241 DSCP051 50 APR Pin Retainer 65 D113070 DSCP089 56
41-502-2242 thru 2262 DSCP052 51 65 D113071 DSCP090 57
42-530-2500 DSCH083 26 ARA Riser 64 D113072 DSCP091 57
42-530-2525 DSCH084 26 65 D233007 thru 027 DSCP085 55
42-530-2575 DSCH085 26 64 Die Buttons 65
42-530-2575 DSCH089 27 ARL Rough Locator 64 DSC-625S DSCH023 10
42-530-2600 DSCH086 26 65 DSC-D-100 DSCD017 61
42-530-2625 DSCH087 27 ASC Curved Stop Block 64 DSC-D-12 DSCD007 61
42-530-2650 DSCH088 27 ASF Flat Stop Block 64 DSC-D-14 DSCD001 61
42-530-2700 DSCH090 27 ASH100 thru 120 DSCH036 13 DSC-D-34 DSCD015 61
42-530-2725 DSCH091 28 ASH100N thru 120N DSCH049 17 DSC-D-38 DSCD004 61
42-530-2750 DSCH092 28 ASH200 thru 220 DSCH037 14 DSC-D-516 DSCD002 61
42-530-2775 DSCH093 28 ASH300 thru 320 DSCH038 14 DSC-D-58 DSCD013 61
42-530-2800 DSCH094 28 ASH300N thru 320N DSCH050 17 DSC-D-78 DSCD016 61
42-530-2825 DSCH095 29 ASH300S thru 320S DSCH046 16 DSC-D-M10 DSCD0105 61
42-530-2850 DSCH096 29 ASH400 thru 420 DSCH039 14 DSC-D-M10P DSCD106 61
42-530-2900 DSCH097 29 ASH400N thru 420N DSCH051 17 DSC-D-M12 DSCD107 61
42-530-2925 DSCH098 29 ASH400S thru 420S DSCH047 16 DSC-D-M12P DSCD108 61
42-530-2950 DSCH099 30 ASH500 thru 520 DSCH040 14 DSC-D-M16 DSCD109 61
42-530-2975 DSCH0100 30 ASH600 thru 620 DSCH045 16 DSC-D-M20 DSCD110 61
42-530-3000 DSCH101 30 ASP230 thru 270 DSCP092 57 DSC-D-M6 DSCD101 61
42-530-3025 DSCH102 30 ASP302 thru 370 DSCP050 50 DSC-D-M6P DSCD102 61
42-530-3050 DSCH103 31 ASP330N thru 370N DSCP036 46 DSC-D-M8 DSCD103 61
42-530-3075 DSCH104 31 ASP330S thru 370S DSCP015 41 DSC-D-M8P DSCD104 61
42-530-4000 DSCH105 31 ASP402 thru 470 DSCP051 50 DSC1918 DSCH119 35
42-530-4025 DSCH106 31 ASP430N thru 470N DSCP037 46 DSC1938 DSCH120 35
5 279 665 thru 668 DSCH115 34 ASP430S thru 470S DSCP016 41 DSC1948 DSCH121 35
56ZF 28682 DSCH038 14 ASP502 thru 570 DSCP052 50 DSC1963 DSCH122 35
56ZF 28683 DSCH041 15 ASP602 thru 670 DSCP053 51 DSC302L thru 320L DSCH082 25
56ZF 28684 DSCH039 14 ASP630N thru 670N DSCP038 47 DSC302S thru 320S DSCH046 16
56ZF 28685 DSCH042 15 ASP630S thru 670S DSCP017 41 DSC402S thru 420S DSCH049 17
56ZF 28686 DSCH043 15 ASP730 through 770 DSCP093 57 DSC50081 DSCH053 18
56ZF23102824B DSCW503 63 Cam Dwell Wear Plates 65 DSC50082 DSCH054 18
56ZF24981-12 DSCD011 61 Chain Hooks 64 DSC50083 DSCH055 18
56ZF24981-34 DSCD014 61 CL 124-51 DSCW056 62 DSC50084 DSCH056 18
56ZF24981-38 DSCD003 61 CL 127-60 DSCW046 62 DSC502 thru 570 DSCP052 50
56ZF24981-58 DSCD013 61 CL 145-60 DSCW040 62 DSC602S thru 620S DSCH052 17
56ZF27461 DSCP047 49 CL 146-54 DSCW041 62 DSCB00X-M0XX DSCB00X 60
56ZF27462 DSCP046 49 CL 159-58 DSCW074 62 DSCD001 61
56ZF27463 DSCP048 49 CL 63-61 DSCW508 63 DSCD002 61
56ZF27464 DSCP045 48 CL 63-62 DSCW514 63 DSCD003 61
56ZF27465 DSCP049 49 CLP-3691-66 DSCW511 63 DSCD004 61
56ZF28047 DSCP039 47 CSS 1010 DSCH098 29 DSCD005 61
56ZF28047-101 thru 121 DSCP050 50 CSS 1012 DSCH099 30 DSCD006 61
56ZF28048 DSCP040 47 CSS 1212 DSCH100 30 DSCD007 61
56ZF28048-101 thru 121 DSCP051 50 CSS 1214 DSCH101 30 DSCD008 61
56ZF28049 DSCP041 47 CSS 1218 DSCH102 30 DSCD009 61
56ZF28050 DSCP042 48 CSS 1417 DSCH103 31 DSCD010 61
56ZF28066 DSCP053 51 CSS 1616 DSCH014 31 DSCD011 61
56ZF28466 DSCP043 48 CSS 1816 DSCH105 31 DSCD012 61
56ZF28467 DSCP044 48 CSS 1822 DSCH106 31 DSCD013 61
56ZM 2359-2 DSCD004 61 CSS 33 DSCH083 26 DSCD014 61
56ZM 2359-3 DSCD007 61 CSS 35 DSCH084 26 DSCD015 61
56ZM 2359-6 DSCR009 59 CSS 37 DSCH085 26 DSCD016 61
56ZM 2359-7 DSCW017 62 CSS 410 DSCH093 28 DSCD017 61
56ZM 2359-9 DSCW003 CSS 412 DSCH094 28 DSCF001 60
56ZM 2479-1 DSCR008 59 CSS 44 DSCH086 26 DSCF002 60
6022899 DSCW027 62 CSS 46 DSCH087 27
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342
Page 66
ACT Trunion
APQ Ret. Loc. Pin
APS Ret. Loc. Pin
ARE Respot Pin
ARL Padded Loc.
ARP Ret. Respot Pin
http://dougstampco.com [email protected]
IndexPart Number DSC Ref, Page Part Number DSC Ref, Page Part Number DSC Ref, PageDSCH001 5 DSCH076 24 DSCP018 41
DSCH002 5 DSCH077 24 DSCP019 42
DSCH003 5 DSCH078 24 DSCP020 42
DSCH004 5 DSCH079 25 DSCP021 42
DSCH005 6 DSCH080 25 DSCP022 42
DSCH006 6 DSCH081 25 DSCP023 43
DSCH007 6 DSCH082 25 DSCP024 43
DSCH008 6 DSCH083 26 DSCP025 43
DSCH009 7 DSCH084 26 DSCP026 43
DSCH010 7 DSCH085 26 DSCP027 44
DSCH011 7 DSCH086 26 DSCP028 44
DSCH012 7 DSCH087 27 DSCP029 44
DSCH013 8 DSCH088 27 DSCP030 44
DSCH014 8 DSCH089 27 DSCP031 45
DSCH015 8 DSCH090 27 DSCP032 45
DSCH016 8 DSCH091 28 DSCP033 45
DSCH017 9 DSCH092 28 DSCP034 45
DSCH018 9 DSCH093 28 DSCP035 46
DSCH019 9 DSCH094 28 DSCP036 46
DSCH020 9 DSCH095 29 DSCP037 46
DSCH021 10 DSCH096 29 DSCP038 47
DSCH022 10 DSCH097 29 DSCP039 47
DSCH023 10 DSCH098 29 DSCP040 47
DSCH024 10 DSCH099 30 DSCP041 47
DSCH025 11 DSCH100 30 DSCP042 48
DSCH026 11 DSCH101 30 DSCP043 48
DSCH027 11 DSCH102 30 DSCP044 48
DSCH028 11 DSCH103 31 DSCP045 48
DSCH029 12 DSCH104 31 DSCP046 49
DSCH030 12 DSCH105 31 DSCP047 49
DSCH031 12 DSCH106 31 DSCP048 49
DSCH032 12 DSCH107 32 DSCP049 49
DSCH033 13 DSCH108 32 DSCP050 50
DSCH034 13 DSCH109 32 DSCP051 50
DSCH035 13 DSCH110 32 DSCP052 50
DSCH036 13 DSCH111 33 DSCP053 50
DSCH037 14 DSCH112 33 DSCP054 51
DSCH038 14 DSCH113 33 DSCP055 51
DSCH039 14 DSCH114 33 DSCP056 51
DSCH040 14 DSCH115 34 DSCP057 51
DSCH041 15 DSCH116 34 DSCP058 52
DSCH042 15 DSCH117 34 DSCP059 52
DSCH043 15 DSCH118 34 DSCP060 52
DSCH044 15 DSCH119 35 DSCP061 52
DSCH045 16 DSCH120 35 DSCP062 52
DSCH046 16 DSCH121 35 DSCP063 52
DSCH047 16 DSCH122 35 DSCP064 52
DSCH048 16 DSCH123 36 DSCP065 52
DSCH049 17 DSCH123 36 DSCP066 53
DSCH050 17 DSCH124 36 DSCP067 53
DSCH051 17 DSCH124 36 DSCP068 53
DSCH052 17 DSCH125 36 DSCP069 53
DSCH053 18 DSCH125 36 DSCP070 53
DSCH054 18 DSCK001 59 DSCP071 53
DSCH055 18 DSCK002 59 DSCP072 53
DSCH056 18 DSCK003 59 DSCP073 53
DSCH057 19 DSCK004 59 DSCP074 54
DSCH058 19 DSCK005 60 DSCP075 54
DSCH059 19 DSCP001 37 DSCP076 54
DSCH060 19 DSCP002 37 DSCP077 54
DSCH061 20 DSCP003 38 DSCP078 54
DSCH062 20 DSCP004 38 DSCP079 54
DSCH063 21 DSCP005 38 DSCP080 54
DSCH064 21 DSCP006 38 DSCP081 54
DSCH065 21 DSCP007 39 DSCP082 55
DSCH066 21 DSCP008 39 DSCP083 55
DSCH067 22 DSCP009 39 DSCP084 55
DSCH068 22 DSCP010 39 DSCP085 55
DSCH069 22 DSCP011 40 DSCP086 56
DSCH070 22 DSCP012 40 DSCP087 56
DSCH071 23 DSCP013 40 DSCP088 56
DSCH072 23 DSCP014 40 DSCP089 56
DSCH073 23 DSCP015 41 DSCP090 57
DSCH074 23 DSCP016 41 DSCP091 57
DSCH075 24 DSCP017 41 DSCP092 57
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342
Page 67http://dougstampco.com [email protected]
IndexPart Number DSC Ref, Page Part Number DSC Ref, Page Part Number DSC Ref, PageDSCP093 57 FSD 14051 DSCH008 6 FSD 32788 DSCW039 62
DSCR001 58 FSD 14052 DSCH012 7 FSD 32789 DSCW038 62
DSCR002 58 FSD 14053 DSCH013 8 FSD 3399 DSCR004 59
DSCR003 58 FSD 14056 DSCH009 7 FSD 34492 DSCH001 5
DSCR004 DSCR004 59 FSD 14058 DSCH010 7 FSD 34493 DSCH002 5
DSCR005 DSCR005 59 FSD 14059 DSCH011 7 FSD 34494 DSCH003 5
DSCR006 DSCR006 59 FSD 14066 DSCH006 6 FSD 34495 DSCH004 5
DSCR007 DSCR007 59 FSD 14067 DSCH007 6 FSD 34496 DSCH005 6
DSCR008 DSCR008 59 FSD 14068 DSCH014 8 FSD 34497 DSCH006 6
DSCR009 DSCR009 59 FSD 14075 DSCH019 9 FSD 34498 DSCH007 6
DSCS001 DSCS001 61 FSD 14076 DSCH020 9 FSD 34499 DSCH008 6
DSCS002 DSCS002 61 FSD 14083 DSCW024 62 FSD 34500 DSCH009 7
DSCS003 DSCS003 61 FSD 14091 DSCW037 62 FSD 34501 DSCH010 7
DSCS004 DSCS004 61 FSD 14101-1 DSCW009 62 FSD 34502 DSCH011 7
DSCS005 DSCS005 61 FSD 14101-2 DSCW035 62 FSD 34503 DSCH012 7
DSCW001 thru 310 62 FSD 14102 DSCD005 61 FSD 34504 DSCH013 8
DSCW501 thru 521 63 FSD 14102SS DSCD006 61 FSD 34505 DSCH014 8
DSCW601 thru 604 63 FSD 14103 DSCD008 61 FSD 34506 DSCH015 8
DSCW701 thru 712 63 FSD 14103SS DSCD009 61 FSD 34507 DSCH016 8
DSCY001 DSCY001 61 FSD 14103Z DSCD010 61 FSD 34508 DSCH017 9
DSCY002 DSCY002 61 FSD 14104-2 DSCS005 61 FSD 34509 DSCH018 9
DSCY003 DSCY003 61 FSD 14104-3 DSCS001 61 FSD 34510 DSCH019 9
DSCY004 DSCY004 61 FSD 14104-4 DSCS002 61 FSD 34511 DSCH020 9
DSCY005 DSCY005 61 FSD 14104-5 DSCS003 61 FSD 34572-51 DSCK001 59
DSCY006 DSCY006 61 FSD 141040-1 DSCS004 61 FSD 36577 DSCW001 62
DSCY007 DSCY007 61 FSD 14107 DSCH005 6 FSD 3850 DSCR005 59
DSCY008 DSCY008 61 FSD 14108 DSCH017 9 FSD 3851 DSCR006 59
F610515 DSCW301 62 FSD 14109 DSCH018 9 FSD 39279 DSCP001 37
F610618 DSCW302 62 FSD 14119 DSCW036 62 FSD 39280 DSCP002 37
F610825 DSCW303 62 FSD 14120 DSCW008 62 FSD 39281 DSCP003 38
F611028 DSCW304 62 FSD 14121 DSCW029 62 FSD 39558 DSCH021 10
F611234 DSCW305 62 FSD 14121-52 DSCW030 62 FSD 39559 DSCH022 10
F611644 DSCW306 62 FSD 14123 DSCW033 62 FSD 39600 DSCH021 10
F612050 DSCW307 62 FSD 14124 DSCW045 62 FSD 39601 DSCH022 10
F612456 DSCW308 62 FSD 14125 DSCW032 62 FSD 3999 DSCR007 59
F613072 DSCW309 62 FSD 14126 DSCW031 62 FSD 40221 DSCP004 38
F613690 DSCW310 62 FSD 14128 DSCW023 62 FSD 40222 DSCP005 38
F620614 DSCW701 63 FSD 14129 DSCH003 5 FSD 40223 DSCP006 38
F620818 DSCW702 63 FSD 14131 DSCP058 52 FSD 40224 DSCP007 39
F621022 DSCW704 63 FSD 14136 DSCP059 52 FSD 40225 DSCP008 39
F621025 DSCW703 63 FSD 14137 DSCP060 52 FSD 40226 DSCP009 39
F621227 DSCW705 63 FSD 14138 DSCP061 52 FSD 40227 DSCP010 39
F621634 DSCW706 63 FSD 14139 DSCP062 52 FSD 40228 DSCP011 40
F622042 DSCW707 63 FSD 14140 DSCP063 52 FSD 40229 DSCP012 40
F622244 DSCW708 63 FSD 14141 DSCP064 52 FSD 40230 DSCP013 40
F622450 DSCW709 63 FSD 14142 DSCP065 52 FSD 40231 DSCP014 40
F622756 DSCW710 63 FSD 14143-51 DSCP066 53 FSD 40774 DSCP018 41
F623060 DSCW711 63 FSD 14144 DSCP067 53 FSD 40775 DSCP019 42
F623672 DSCW712 63 FSD 14145 DSCP068 53 FSD 40776 DSCP020 42
FS 15 L BLOCKS 65 FSD 14146 DSCP069 53 FSD 40800 DSCH024 10
FS 15-A DSCH063 21 FSD 14147 DSCP070 53 FSD 40801 DSCH025 11
FS 15-B DSCH064 21 FSD 14148 DSCP071 53 FSD 40827 DSCH026 11
FS 15-C DSCH065 21 FSD 14150 DSCW007 62 FSD 40828 DSCH027 11
FS 15-D DSCH066 21 FSD 14151 DSCW021 62 FSD 40829 DSCH028 11
FS 15-E DSCH067 22 FSD 14162 DSCW019 62 FSD 40873 DSCP021 42
FS 15-F DSCH068 22 FSD 14163 DSCW069 62 FSD 40874 DSCP022 42
FS 15-G DSCH069 22 FSD 14170 DSCW072 62 FSD 40875 DSCP023 43
FS 15-H DSCH070 22 FSD 14174 DSCP072 53 FSD 40876 DSCP024 43
FS 15-J DSCH071 23 FSD 14175 DSCP073 53 FSD 40877 DSCP025 43
FS 15-K DSCH072 23 FSD 14180 DSCH001 5 FSD 40878 DSCP076 54
FS 15-L DSCH073 23 FSD 14181 DSCH002 5 FSD 40879 DSCP078 54
FS 15-M DSCH074 23 FSD 14182 DSCW055 62 FSD 40880 DSCP080 54
FS 15-N DSCH075 24 FSD 14184 DSCW006 62 FSD 40881 DSCP082 55
FS 15-P DSCH076 24 FSD 14190 DSCH016 8 FSD 40891 DSCH029 12
FS 15-R DSCH077 24 FSD 14195 DSCH111 33 FSD 40892 DSCH030 12
FS 15-T DSCH078 24 FSD 14202 DSCH015 8 FSD 40893 DSCH031 12
FS 15-U DSCH079 25 FSD 14219 DSCP074 54 FSD 40894 DSCH032 12
FS 15-V DSCH080 25 FSD 14230 DSCP075 54 FSD 40895 DSCH033 13
FS 15-W DSCH081 25 FSD 14235 DSCP056 51 FSD 40917 DSCP077 54
FS 21-09-01XX DSCP032 45 FSD 14236 DSCP055 51 FSD 40918 DSCP079 54
FS 21-09-03XX DSCP033 45 FSD 14237 DSCP054 51 FSD 40919 DSCP081 54
FSD 14010 DSCW026 62 FSD 14239 DSCD0115 61 FSD 40920 DSCP083 55
FSD 14013 DSCW025 62 FSD 14240 DSCP057 51 FSD 41194 DSCP026 43
FSD 14014 DSCW034 62 FSD 14312 DSCW002 62 FSD 41238 DSCP027 44
FSD 14050 DSCH004 5 FSD 30337 DSCF001 60 FSD 41256 DSCH034 13
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342
Page 68http://dougstampco.com [email protected]
IndexPart Number DSC Ref, Page Part Number DSC Ref, Page Part Number DSC Ref, PageFSD 41257 DSCH035 13 Shims 5 WG 521-76-D DSCW014 62
FSD 41258 DSCH037 14 SP1-30 thru 70 DSCP050 50 WG 521-76-E DSCW016 62
FSD 41259 DSCH038 14 SP2-30 thru 70 DSCP051 50 WG 521-76-F DSCW013 62
FSD 41260 DSCH039 14 SP3-30 thru 70 DSCP052 51 WG 522-54-A DSCW112 62
FSD 41294 DSCP050 50 Spacers 37 WG 522-54-B DSCW116 62
FSD 41295 DSCP051 50 STD 40-1 DSCW042 62 WG 522-54-C DSCW114 62
FSD 41296 DSCP053 51 STD 40-2 DSCW022 62 WG 522-54-D DSCW117 62
FSD 41341 DSCD101 61 STD 40-3 DSCW047 62 WG 522-54-E DSCW115 62
FSD 41342 DSCD103 61 STD 40-4 DSCW004 62 WG 522-54-F DSCW113 62
FSD 41343 DSCD105 61 STD 40-5 DSCW075 62 WG 629-59-A DSCW052 62
FSD 41344 DSCD107 61 STD 40-6 DSCW095 62 WG 629-59-B DSCW053 62
FSD 41404-51-XX DSCB001 60 STD 40-7 DSCW048 62 WG 629-59-C DSCW054 62
FSD 41404-52-XX DSCB002 60 STD 40-8 DSCW077 62 WG 629-59-D DSCW051 62
FSD 41404-53-XX DSCB003 60 STD-40-9 DSCW020 62 WG 629-59-E DSCW049 62
FSD 41404-54-XX DSCB004 60 Stop Blocks 64 WG 629-59-F DSCW050 62
FSD 41404-55-XX DSCB005 60 Stub Shafts 64 WG 642-51-A DSCW108 62
FSD 41405-51 DSCW601 63 Tooling Balls 65 WG 642-51-B DSCW109 62
FSD 41405-52 DSCW602 63 Trunnion Blocks. 65 WG 642-51-C DSCW106 62
FSD 41405-53 DSCW603 63 TYPE 1 DSCH119 35 WG 642-51-D DSCW110 62
FSD 41405-54 DSCW604 63 TYPE 2 DSCH120 35 WG 642-51-E DSCW107 62
FSD 5590 DSCH112 33 TYPE 3 DSCH121 35 WG 642-51-F DSCW105 62
FSD L BLOCKS 65 TYPE 4 DSCH122 35 WG 6561-51 DSCW501 63
FSD SHAFTS 64 W111 65 WG 9053-51 DSCW506 63
GSD-A DSCH057 19 W211 65 WG 9132-51 DSCW502 63
GSD-B DSCH002 5 W311 65 WG 9134-51 DSCW504 63
GSD-C DSCH058 19 Washers 62 WG 9237-51 DSCW505 63
GSD-D DSCH070 22 Weld Washers 61 WG 9239-51 DSCW509 63
GSD-E DSCH059 19 WG 1104-51 DSCW005 62 WG1064-51 DSCW098 62
GSD-F DSCH060 19 WG 1969-51 DSCK004 59 WG1064-52 DSCW078 62
GSD-G DSCH061 20 WG 1969-51 REV 2 DSCK005 60 WG1080-51 DSCW132 62
GSD-H DSCH062 20 WG 2416-53-A DSCW057 62 WG1211-53 DSCW044 62
GSD-J DSCH080 25 WG 2416-53-B DSCW059 62 WG1370-51 DSCW094 62
GSD-K DSCH081 25 WG 2416-53-C DSCW061 62 WG1442-53 DSCW043 62
L Blocks 65 WG 2416-53-D DSCW062 62 WG1511-51 DSCW111 62
L01 64 WG 2416-53-E DSCW058 62 WG308-51 DSCW073 62
Lift Pins 64 WG 2416-53-F DSCW060 62 WG577-51 DSCW120 62
Links 61 WG 2416-57-A DSCW090 62 WG753-51 DSCW070 62
Locating Pins 65 WG 2416-57-B DSCW087 62 WG780-51 DSCW097 62
M FS 15-A DSCH063 21 WG 2416-57-C DSCW088 62 WG786-51 DSCW092 62
M FS 15-B DSCH064 21 WG 2416-57-D DSCW089 62 WG787-51 DSCW118 62
M FS 15-C DSCH065 21 WG 2416-57-E DSCW086 62 WG790-51 DSCW128 62
M FS 15-D DSCH066 21 WG 2416-57-F DSCW085 62 WG802-51 DSCW076 62
M FS 15-E DSCH067 22 WG 2416-59-A DSCW133 62 WG8357-51 DSCY001 61
M FS 15-F DSCH068 22 WG 2416-59-B DSCW135 62 WG8357-52 DSCY002 61
M FS 15-G DSCH069 22 WG 2416-59-C DSCW137 62 WG8357-53 DSCY003 61
M FS 15-H DSCH070 22 WG 2416-59-D DSCW134 62 WG8357-54 DSCY004 61
M FS 15-J DSCH071 23 WG 2416-59-E DSCW138 62 WG8357-55 DSCY005 61
M FS 15-K DSCH072 23 WG 2416-59-F DSCW136 62 WG8357-56 DSCY006 61
M FS 15-L DSCH073 23 WG 2416-61-A DSCW103 62 WG8357-57 DSCY007 61
M FS 15-M DSCH074 23 WG 2416-61-B DSCW099 62 WG8357-58 DSCY008 61
M FS 15-N DSCH079 24 WG 2416-61-C DSCW101 62 WG840-51 DSCW096 62
M FS 15-P DSCH080 24 WG 2416-61-D DSCW102 62 WG921-51 DSCW093 62
M FS 15-R DSCH081 24 WG 2416-61-E DSCW104 62 WG922-51 DSCW119 62
M FS 15-T DSCH082 24 WG 2416-61-F DSCW100 62 WG923-51 DSCW131 62
M FS 15-U DSCH079 25 WG 2416-65-A DSCW082 62 WG929-51 DSCW121 62
M FS 15-V DSCH080 25 WG 2416-65-B DSCW081 62 WG970-51 DSCW129 62
M FS 15-W DSCH081 25 WG 2416-65-C DSCW079 62 WG980-51 DSCW130 62
M01 Tooling Ball 65 WG 2416-65-D DSCW080 62 WT134-57 DSCW091 62
M03 Chain Hook 64 WG 2416-65-E DSCW083 62 WT140X-56 DSCW071 62
M1077 DSCR001 58 WG 2416-65-F DSCW041 62
M1080 DSCR002 58 WG 2507-54-A DSCW122 62
M1309 DSCR003 58 WG 2507-54-B DSCW125 62
NC Blocks Blanks 65 WG 2507-54-C DSCW124 62
P111005 DSCD018 61 WG 2507-54-D DSCW123 62
Pin Retainers 65 WG 2507-54-E DSCW127 62
Punches 65 WG 2507-54-F DSCW126 62
65 WG 521-75-A DSCW068 62
Retractable Pins 65 WG 521-75-B DSCW067 62
Risers 64 WG 521-75-C DSCW066 62
Rough Locators 64 WG 521-75-D DSCW063 62
SAS 32740 DSCP028 44 WG 521-75-E DSCW064 62
SAS 33840 DSCP030 44 WG 521-75-F DSCW065 62
SAS 42751 DSCP029 44 WG 521-76-A DSCW011 62
SAS 65163 DSCP031 45 WG 521-76-B DSCW015 62
Serrated Washers 61 WG 521-76-C DSCW012 62
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342
Page 69
Respot Pins
http://dougstampco.com [email protected]
Top Related