24” Marvel Professional High-Efficiency Single Zone Wine CellarModel # MP24WS****
• Dynamic Cooling Technology™ delivers rapid cooldown and the industry’s best temperature stability
• Soft-close integrated hinge provides a seamless zero clearance installation and a smooth, gentle close
• Professional styling: framed stainless steel door, sturdy full-length handle, sleek stainless steel shelf fronts and 4” adjustable stainless steel toe kick
• MARVEL Intuit™ Integrated Controls provide precise temperature management from 40°F to 65°F
• Two-stage, soft blue theatre-style LED lighting and sophisticated midnight black interior
• Heavy-gauge wine racks are shaped to safely cradle each wine bottle
• Full-extension ball bearing smooth-glide shelf system prevents jarring
• Thermal-efficient cabinet ensures optimum wine preservation and energy efficiency while maximizing capacity
• Tinted, UV-resistant dual pane glass door protects wine from damaging ultra-violet light
• Audible and visual alarms signal when door is left ajar to protect the wines integrity and energy use
• Vacation/Sabbath mode conserves energy during times when the unit is not in use and complies with Star-K requirements
• Door lock to protect your collection
• Height adjustment up to 1” with leveling legs
• Up to 2x more efficient than leading competitors
• Vibration Neutralization System™ protects wine from agitation
• 3-year warrantyStorage Capacity
Up to 48 bottles total
Storage Configuration
(5) 8-bottle smooth-glide full wine racks (2) 4-bottle smooth-glide half-depth wine racks
Product Dimensions
23⅞” W x 33¾” minimum H x 25⅝” D (including handle)
Finish/Door Options
Stainless Steel Wood Overlay(Panel Ready)
Ordering Details
Stainless Frame, Glass Door With Lock, Integrated Right Hinge
MP24WSG4RS
Stainless Frame, Glass Door With Lock, Integrated Left Hinge
MP24WSG4LS
Panel Overlay Frame Ready Glass Door, Integrated Right Hinge With Lock
MP24WSF4RP
Panel Overlay Frame Ready Glass Door, Integrated Left Hinge With Lock
MP24WSF4LP
No panel installation kit required.
Dynamic Cooling Technology™ delivers rapid cool down and the industry’s best temperature stabilityThe distinctive Marvel design features a thermal-efficient cabinet and door combined with Dynamic Cooling Technology™ for superior temperature stability, faster cooling times and speedy temperature recovery even with high frequency.
Front SideFront
ForcedAir Fan
Evaporator Plate
Return Air Intake
Front SideFront
ForcedAir Fan
Evaporator Plate
Return Air Intake
Width 23 ⅞"
Interior Finish Black
Capacity Up to 48 wine bottles
Shelving System Side Mount - Bottle shape wire
Shelf Fronts Stainless Steel
Other Storage
Interior Lighting 2 Blue LED Pods
Toe Grill Finish Stainless Steel
Hinge Soft Close Integrated Hinge
Handle Professional
Control Type Intuit™
Temperature Range 40° - 65° F
Lock Yes
Electrical Requirements 120V / 60Hz / 15A
Length of Power Cord 5'
Product Dimensions 23 ⅞" W x 33 ¾" H x 21 ½" D
Depth to Front of Door 23 23/32"
Depth to Handle 26 7/32"
Depth with door at 90° 46 ¾"
Shipping Weight 160 lbs
Finishes SS, O
Vacation / Sabbath Mode
Yes
Agency Approvals CSA
Energy Star Certified NA
Finishes Key
SS = Stainless SteelO = Overlay
"A"
"B"
"C"
Cabinet Dimensions
"D" "E" "F"
23 7⁄8”(60.7 cm)
33 3⁄4” to 34 3⁄4”(85.7 to 88.3 cm)
23 23⁄32”(60.2 cm)
24" Rough-In Dimensions
"A" "B" "C"
24" (61 cm)
34" to 35"(86.4 cm to 88.9 cm)
24"(61 cm)
“G” “H” “J”
26 7⁄32”(66.6 cm)
461 3⁄32”(117.9 cm)
26 7⁄16”(67.2 cm)
7
"F"
"D"
"E"
"H"
"J"
"G"
PRODUCT DIMENSIONS
211⁄2"(54.6 cm)
1"(2.5 cm)
Figure 6
PRODUCT DATA
MODELELECTRICAL
REQUIREMENTS #PRODUCTWEIGHT
MP15WSG 115V/60Hz/15A 105 lbs(47.6 kg)
MP15WSF 115V/60Hz/15A 105 lbs(47.6 kg)
MP24**G 115V/60Hz/15A 140 lbs(63.6 kg)
MP24**F 115V/60Hz/15A 140 lbs(63.6 kg)
* Depth dimension of rough-in opening may vary depend-ing on each individual installation. To recess entire door "F" dimension plus 1" (2.5 cm) for thickness of power cord plug is required.
** Minimum rough-in opening required is to be larger than the adjusted height of the cabinet.
# A grounded 15 amp dedicated circuit is required. Follow all local building codes when installing electrical and appli-ance.
APPLIES TO THE FOLLOWING MARVEL MODELSMP15WS MP24WS
MP24WD
Overlay Panels
For comprehensive installation instructions, please visit www.marvelrefrigeration.com
15
! CAUTION
13⁄16"(3 cm)
15⁄32"(2.9 cm)
Figure 15Left Hand Hinged Door
24" (61 cm) wide appliance
Weight of overlay door panel must not exceed 10 pounds (4.5 kg) for a glass door model.
Figure 17Right Hand Hinged Door
24" (61 cm) wide appliance
Clearance for hinge
at top and bottom
Clearance for screw head,
4 places
Figure 16Left Hand Hinged Door
24" (61 cm) wide appliance
Figure 18Right Hand Hinged Door
24" (61 cm) wide appliance
Clearance for hingeat top and bottom
Clearance for screw head, 4 places
Hin
ge s
ide
of d
oor
Top of door Top of door
Hin
ge s
ide
of d
oor
OVERLAY DOOR PANEL INSTALLATION
This sidefacing interior
This sidefacing interior
233⁄4"(60.3 cm)
1⁄4"(6 mm)Deep
233⁄4"(60.3 cm) 1⁄4"
(6 mm)Deep
1" (2.5 cm) diameter x 1⁄4" (6 mm) deep
4 places
11⁄2"(3.8 cm)typical
111⁄16"(4.3 cm)
1" (2.5 cm) diameter x 1⁄4" (6 mm) deep4 places
47⁄8"(12.4 cm)
31⁄8"(7.9 cm)
2"(5.1 cm)
311⁄16"(9.4 cm)
311⁄16"(9.4 cm)11⁄2"
(3.8 cm)typical
111⁄16"(4.3 cm)
327⁄32"(9.8 cm)
1⁄4" (6 mm)radius ispermissible
14"(35.6 cm)
13⁄16"(3 cm)
31⁄8"(7.9 cm)
3011⁄32"(77.1 cm)3011⁄32"
(77.1 cm)
31⁄8"(7.9 cm)
41⁄8"(10.5 cm)
31⁄8"(7.9 cm)
13⁄4"(4.4 cm)
31⁄8"(7.9 cm)
2"(5.1 cm)
41⁄8"(10.5 cm)
1⁄4" (6 mm)radius ispermissible
14"(35.6 cm)
47⁄8"(12.4 cm)
327⁄32"(9.8 cm)
31⁄8"(7.9 cm)
13⁄4"(4.4 cm)
15⁄32"(2.9 cm)
15
! CAUTION
13⁄16"(3 cm)
15⁄32"(2.9 cm)
Figure 15Left Hand Hinged Door
24" (61 cm) wide appliance
Weight of overlay door panel must not exceed 10 pounds (4.5 kg) for a glass door model.
Figure 17Right Hand Hinged Door
24" (61 cm) wide appliance
Clearance for hinge
at top and bottom
Clearance for screw head,
4 places
Figure 16Left Hand Hinged Door
24" (61 cm) wide appliance
Figure 18Right Hand Hinged Door
24" (61 cm) wide appliance
Clearance for hingeat top and bottom
Clearance for screw head, 4 places
Hin
ge s
ide
of d
oor
Top of door Top of door
Hin
ge s
ide
of d
oor
OVERLAY DOOR PANEL INSTALLATION
This sidefacing interior
This sidefacing interior
233⁄4"(60.3 cm)
1⁄4"(6 mm)Deep
233⁄4"(60.3 cm) 1⁄4"
(6 mm)Deep
1" (2.5 cm) diameter x 1⁄4" (6 mm) deep
4 places
11⁄2"(3.8 cm)typical
111⁄16"(4.3 cm)
1" (2.5 cm) diameter x 1⁄4" (6 mm) deep4 places
47⁄8"(12.4 cm)
31⁄8"(7.9 cm)
2"(5.1 cm)
311⁄16"(9.4 cm)
311⁄16"(9.4 cm)11⁄2"
(3.8 cm)typical
111⁄16"(4.3 cm)
327⁄32"(9.8 cm)
1⁄4" (6 mm)radius ispermissible
14"(35.6 cm)
13⁄16"(3 cm)
31⁄8"(7.9 cm)
3011⁄32"(77.1 cm)3011⁄32"
(77.1 cm)
31⁄8"(7.9 cm)
41⁄8"(10.5 cm)
31⁄8"(7.9 cm)
13⁄4"(4.4 cm)
31⁄8"(7.9 cm)
2"(5.1 cm)
41⁄8"(10.5 cm)
1⁄4" (6 mm)radius ispermissible
14"(35.6 cm)
47⁄8"(12.4 cm)
327⁄32"(9.8 cm)
31⁄8"(7.9 cm)
13⁄4"(4.4 cm)
15⁄32"(2.9 cm)
13
Figure 10a
OVERLAY DOOR PANEL INSTALLATION
Step 2: Remove the door gasketWith the door laying on a flat surface and starting at a corner of the door remove the magnetic door gasket from the interior side of the door, see Figure 10. Set the gasket aside on a flat surface.
There are 10 holes in the gasket retainer extrusions, (3 on each side and 2 at the top and bottom which are used to fasten the panel to the front of the door. The screws are provided in the literature pack.
Figure 10
Overlay panel flush with top
of door.
Holes in gasket
retainer.
Magnetic Gasket remove starting at a corner, grasp and pull away from the door.
Step 3: Cut and drill the overlay panelDepending on your model cut the overlay door panel to the dimensions shown in Figures 11 to 18.
Overlay panel to be centered on width of door.
Figure 9
Press and hold down this tab on the wire connector and pull the connector apart.
16
Counter bore lock holeon back side.
Figure 19a
#10 x 1⁄2"screw
Figure 19
Hin
ge s
ide
of d
oor
1⁄2" (13 mm) diameter drill through door panel, from other side (see detail above) 13⁄16" (20.5 mm) counter bore, 7⁄16" (11 mm) deep.
17⁄32"(13.7 mm)
31⁄2"(89 mm)
OVERLAY DOOR PANEL INSTALLATION
Step 5: Assemble lock partsTwo (2) lock extensions are provided with the lock. Use the longer extension for 3⁄4" thick overlay panels and the shorter one for 5⁄8" thick overlay panels. Assemble the lock exten-sion, cam stop washer, spring washer, and set screw to the lock as shown in Figure 20 and 21.
Install this lock assembly into the lock hole in the overlay panel and secure with the retaining nut on the back side with a 15 mm socket and ratchet. Make sure the key slot in the front of the lock is vertical.
Step 6: Install lock camAttach the lock cam to the back of the lock assembly with the phillips head screw provided. Orient the lock cam verti-cally when installing on the lock.
Step 4: Assemble the panel to the doorThe preferred method of attaching the panel to the door is to clamp the panel to the door so it cannot move while drilling the screw pilot holes. Use bar clamps or "C" clamps with pads on the clamping surfaces that will not mar the panel or the door. The custom overlay panel should be flush with the top of the door and centered along the width of the door. See Figure 10a. Drill holes through the gasket extrusion using the 10 holes as pilot holes. Use the drill size from the chart in Table "C", being careful not to drill through the front surface of the panel, drill no deeper than 1⁄2" (12.7 mm) deep. If the overlay panel is thinner than 5⁄8" (16 mm) thick shorter screws will have to be obtained. Fasten the panel to the door with the 10 screws provided in the literature pack. (See Figure 19a). Remove the clamps and replace the gasket in the gasket extrusion channels of the door. Some force may be required to seat the gasket into the channels. Be sure the gasket corners are seated properly.
Material Type #10 Wood Screw Hardwood 1⁄8" (3.2 mm) Diameter. Pilot HoleSoftwood 7⁄64 (2.8 mm) Diameter. Pilot Hole
Table C
16
Counter bore lock holeon back side.
Figure 19a
#10 x 1⁄2"screw
Figure 19
Hin
ge s
ide
of d
oor
1⁄2" (13 mm) diameter drill through door panel, from other side (see detail above) 13⁄16" (20.5 mm) counter bore, 7⁄16" (11 mm) deep.
17⁄32"(13.7 mm)
31⁄2"(89 mm)
OVERLAY DOOR PANEL INSTALLATION
Step 5: Assemble lock partsTwo (2) lock extensions are provided with the lock. Use the longer extension for 3⁄4" thick overlay panels and the shorter one for 5⁄8" thick overlay panels. Assemble the lock exten-sion, cam stop washer, spring washer, and set screw to the lock as shown in Figure 20 and 21.
Install this lock assembly into the lock hole in the overlay panel and secure with the retaining nut on the back side with a 15 mm socket and ratchet. Make sure the key slot in the front of the lock is vertical.
Step 6: Install lock camAttach the lock cam to the back of the lock assembly with the phillips head screw provided. Orient the lock cam verti-cally when installing on the lock.
Step 4: Assemble the panel to the doorThe preferred method of attaching the panel to the door is to clamp the panel to the door so it cannot move while drilling the screw pilot holes. Use bar clamps or "C" clamps with pads on the clamping surfaces that will not mar the panel or the door. The custom overlay panel should be flush with the top of the door and centered along the width of the door. See Figure 10a. Drill holes through the gasket extrusion using the 10 holes as pilot holes. Use the drill size from the chart in Table "C", being careful not to drill through the front surface of the panel, drill no deeper than 1⁄2" (12.7 mm) deep. If the overlay panel is thinner than 5⁄8" (16 mm) thick shorter screws will have to be obtained. Fasten the panel to the door with the 10 screws provided in the literature pack. (See Figure 19a). Remove the clamps and replace the gasket in the gasket extrusion channels of the door. Some force may be required to seat the gasket into the channels. Be sure the gasket corners are seated properly.
Material Type #10 Wood Screw Hardwood 1⁄8" (3.2 mm) Diameter. Pilot HoleSoftwood 7⁄64 (2.8 mm) Diameter. Pilot Hole
Table C
16
Counter bore lock holeon back side.
Figure 19a
#10 x 1⁄2"screw
Figure 19
Hin
ge s
ide
of d
oor
1⁄2" (13 mm) diameter drill through door panel, from other side (see detail above) 13⁄16" (20.5 mm) counter bore, 7⁄16" (11 mm) deep.
17⁄32"(13.7 mm)
31⁄2"(89 mm)
OVERLAY DOOR PANEL INSTALLATION
Step 5: Assemble lock partsTwo (2) lock extensions are provided with the lock. Use the longer extension for 3⁄4" thick overlay panels and the shorter one for 5⁄8" thick overlay panels. Assemble the lock exten-sion, cam stop washer, spring washer, and set screw to the lock as shown in Figure 20 and 21.
Install this lock assembly into the lock hole in the overlay panel and secure with the retaining nut on the back side with a 15 mm socket and ratchet. Make sure the key slot in the front of the lock is vertical.
Step 6: Install lock camAttach the lock cam to the back of the lock assembly with the phillips head screw provided. Orient the lock cam verti-cally when installing on the lock.
Step 4: Assemble the panel to the doorThe preferred method of attaching the panel to the door is to clamp the panel to the door so it cannot move while drilling the screw pilot holes. Use bar clamps or "C" clamps with pads on the clamping surfaces that will not mar the panel or the door. The custom overlay panel should be flush with the top of the door and centered along the width of the door. See Figure 10a. Drill holes through the gasket extrusion using the 10 holes as pilot holes. Use the drill size from the chart in Table "C", being careful not to drill through the front surface of the panel, drill no deeper than 1⁄2" (12.7 mm) deep. If the overlay panel is thinner than 5⁄8" (16 mm) thick shorter screws will have to be obtained. Fasten the panel to the door with the 10 screws provided in the literature pack. (See Figure 19a). Remove the clamps and replace the gasket in the gasket extrusion channels of the door. Some force may be required to seat the gasket into the channels. Be sure the gasket corners are seated properly.
Material Type #10 Wood Screw Hardwood 1⁄8" (3.2 mm) Diameter. Pilot HoleSoftwood 7⁄64 (2.8 mm) Diameter. Pilot Hole
Table C
Top Related