Beacon Products, with a 30+ year history of leadership in lighting and site furnishings, is the first domestic manufacturer to introduce the most comprehensive line of “Municipal-Grade” outdoor LED luminaires. These luminaires are designed to be environmentally friendly, as well as performance driven with their light control and distribution optical systems.
““
HSS/EVP Series HSS/VP Series
design . per formance . technology
Two House Side Shield versions are available for the large Beacon Viper (VP-L). In order to ensure proper shield selection, identify the luminaire construction version and match with the appropriate shield type as illustrated below.
Most Luminaires manufactured after March 1, 2017:
Product Identification Attributes:
1. The electrical compartment access door does not have the brand marking “Beacon” in embossed die cast letters
2. The number of heat sink fins total 13 per side
Most Luminaires manufactured before March 1, 2017:
Product Identification Attributes:
1. The electrical compartment access door has the brand marking “Beacon” in embossed die cast letters
2. The number of heat sink fins total 6 per side
HSS/VP-L/90-FB/XXX HSS/VP-L/90-LR/XXX HSS/VP-L/270-FB/XXX HSS/VP-L/270-LR/XXXHSS/EVP-L/90-FB/XXX HSS/EVP-L/90-LR/XXX HSS/EVP-L/270-FB/XXX HSS/EVP-L/270-FB/XXX HSS/EVP-L/360/XXX HSS/VP-L/360/XXX
Beacon Viper VP-L House Side Shield Selection Guide Beacon Viper VP-L House Side Shield Selection Guide
p. 800-345-4928f. 941-751-5535
www.beaconproducts.com
2041 58th Avenue EastBradenton, FL 34203
beacon products design performance technology
XXXX/XX/XXECO-XXXXXXXXXX
D
C
B
A
1 2 8765432
D
C
B
A
1 2 876543
This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting.
UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v
CRITICAL DIMENSIONS
PART NO:
REV.
FINISH: MATERIAL:
THIRD ANGLE PROJECTION
DRAWN BY:
DO NOT SCALE PRINTCONFORMS TO ASME Y14.5MDIMENSIONS IN [ ] IN MMDIMENSIONS IN INCHES
CHECKED BY:
ENGINEERING:
CATALOG NO:SCALE
DSIZEDRAWING NO.
CHCK DESN RECORD DATE REV
SHT 11 SHTS
Error: No reference Error: No reference*
*
Viper_TestFit.asmkhaueisen Error: No reference
XXX05/19/05
XXX05/19/05
PV:1
NOTES: UNLESS OTHERWISE SPECIFIED
1. DEBURR AND BREAK SHARP CORNERS.
1
2 2XXXX/XX/XXECO-XXXXXXXXXX
D
C
B
A
1 2 8765432
D
C
B
A
1 2 876543
This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting.
UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v
CRITICAL DIMENSIONS
PART NO:
REV.
FINISH: MATERIAL:
THIRD ANGLE PROJECTION
DRAWN BY:
DO NOT SCALE PRINTCONFORMS TO ASME Y14.5MDIMENSIONS IN [ ] IN MMDIMENSIONS IN INCHES
CHECKED BY:
ENGINEERING:
CATALOG NO:SCALE
DSIZEDRAWING NO.
CHCK DESN RECORD DATE REV
SHT 11 SHTS
Error: No reference Error: No reference(REFERENCE)
-
REFERENCE MODEL, LARGE VIPER ASSEMBLYsgardiner Error: No reference
XXX05/19/05
XXX05/19/05
PV:1
NOTES: UNLESS OTHERWISE SPECIFIED
1. DEBURR AND BREAK SHARP CORNERS.
1
(2 shields shown, 1 positioned at the back and 1 positioned at the front)
(1 shield shown in left position)
(1 shield shown in left position)
(2 shields shown, 1 positioned at the back and 1 positioned at the front)
XXX denotes finish color XXX denotes finish color
Top Related