ZXG10-MSC/VLR,HLR/AUC,SC Software Installation. Agenda General Installation Flow ZXG10-MSC/VLR...

ZXG10-MSC/VLR,HLR/AUC,SC ZXG10-MSC/VLR,HLR/AUC,SC Software InstallationSoftware Installation

Agenda

General Installation Flow

ZXG10-MSC/VLR Software Installation

ZXG10-HLR/AUC Software Installation

ZXG10-SC Software Installation

General Installation Flow

General Installation FlowStart

Project Survey

Project Design

2nd Environment Acceptance

Unpacking&Inspection

Hardware Installation

Checkup&Power-on

Software Installation

System Test

Deliver for Acceptance Test

1st Acceptance Test

Handover

Cutover Preparation

Cutover

Trial Run

Final Acceptance

End

ZXG10-MSC/VLR Software Installation

ZXG10-MSC/VLR Software

TCP/IPTCP/IP

MPMMPM

OMM OMM ServerServer

OMM OMM ClientClient Billing Billing

ServerServer

ZXG10-MSC/VLR Software List

OMM ServerWin2000 ServerMSSQL2000 ServerZXG10-MSC/VLR OMC-Server

OMM ClientWin2000 ServerMSSQL2000 ClientZXG10-MSC/VLR OMC-Client

Billing ServerWin2000 ServerMSSQL2000 ServerZXG10-MSC/VLR OMC-Billing SystemDual-system Software

Installation of Win2000 Server Suggested Partition:

Required Components:

Install “FTP Service” on OMM Server&Client and Billing Server;

Install “RAS” on OMM Server&Client;

Install “IIS” on Billing Server;

Disk Space> 20G

C: 4G(NTFS) Win2000

D: 16G (8G for Client)

SQL Server

E: Left Space Backup files and toolsDisk Space< 20G

C: 4G(NTFS) Win2000

D: Left Space SQL Server, backup files

Installation of Win2000 Server

Raid—Redundancy Array of Independent Disks

OMM Server with RAID card and two hard disks can adopt RAID1.

Disk array of Billing Server equipped with three hard disks can adopt RAID5 mode; Disk array of Billing Server with more than four hard disks can adopt RAID0+1 mode.

Installation of Win2000 Server

ModeMode DescriptionDescription

RAID0 Make a virtual disk out of n disks. The available capacity is n disks.

Data are alternately written to these disks.No redundancy data but high read-write performance.

RAID1 Make a virtual disk out of two disks. The available capacity is 2 disks.

Data are duplicated on these two disks. Quick read but slow write. Good data redundancy.

*RAID5 Make a virtual disk out of n disks. The available capacity is n-1 disks. Data are alternately written to these disks. Quick read but slow write. Good redundancy data.

*RAID0+1 Make a virtual disk out of n disks. The available capacity is n/2 disks.

Data are copied between two mirror disks. High read-write performance and good data redundancy.

Installation of Win2000 Server Computer Name—ZX_area code_office code_node code

Area code :10~999;

Office code:1~254;

Node code : 129~133 for server,200~239 for client,240~255 reserved;

IP Address— a.b.c.d

a=192+Int{(Area code*8)/256}

b=Remainder of {(Area code*8)/256}

c=Office code

d=Node code

Note:

For servers with multiple Ethernet cards, a.b.c remain the same and 10 is

added to d for the second card, 20 for the third, and so on.

Login Account—ZXG10/ZXG10 (Administrator)

Node Code Conventions

240~245Reserved

130(131,132)Billing Server

200~239OMM Client

129OMM Server

ZXG10-MSC/VLR

Installation of MSSQL 2000

Installation of MSSQL2000 Server Tool

Set installation folder to Disk D (For Billing server and HLRDB,

set data folder to the shared disk array (M), if there is)

Use “Local System Account”

Use “Mixed Authentication Mode” and “Blank Password”

Installation of MSSQL2000 Client Tool

Installation of SP3

Installation of MSSQL 2000

Database Properties

Master—Data: 100MB

Log : 30MB

Tempdb—Data:200MB

Log :100MB

Installation of OMC-Server (1)


Delete node “133”


After restart


Table of Suggested Database Size

Database Name Data(MB) Log(MB)

Alarm Database 160 40

Performance Statistics DB 600 300

User Trace DB 50 20

Diagnosis and Test DB 16 None

Database Management DB 20 10


No CSM

MSC 2~n

VLR 2~n

With CSM

CSM 1&2

MSC 3~n

VLR 1

Installation of OMC-Client

Installation of OMC-Billing

Don’t initialize right management database.

Installation of Dual Billing Server

Dual system comprises two servers with identical configurations and a disk array.The two servers are monitored by a heartbeat cable.The two servers are in active/passive mode.The disk array can only be accessed by the active server.

Ethernet

Billing Server ADisk array

RS 232 Connection

X.25/FTAM to Billing Center

Router

Billing Server P

Installation of Dual Billing Server1. Start disk array and server A, install Win2000, SQL Server 2000 and

Billing system as 130.

2. Set “MSSQL Server” service startup type to “manual”, delete “SerApp.exe” from startup folder and then modify the IP and computer name to 131.

Note: Install SQL program on the local disk but the data to the disk array.

3. Shut down server A and start server P. Install Win2000, SQL Server 2000 and Billing system as 130. Set “MSSQL Server” service startup type to “manual”, delete “SerApp.exe” from startup folder. Then modify the IP and computer name to 132.

Note: Windows login account and password, SQL Server installation program folder, data folder and size should be identical to those of server A.

4. Start both servers, install Cluster software, establish heartbeat link and start cluster operation on both servers.

5. Setup cluster resources on the active server.

Installation of NT Cluster


Input the password of “administrator” account;

The current login user must be “administrator”, otherwise, system requests to restart.

Post-installation of NT ClusterCluster Service –“Automatic” startup type and log on as “Local System account”;Cluster Monitor Service—“Manual” startup type and log on as “Local System account”;

Cluster Service Properties (Local Computer)

General

OK Cancel

Service name: ClusSvc

Display name: Cluster Service

Description: Enables servers to work together as a cluster to keep

Log On Recovery Dependencies

ApplyApply

StopStopStart

Path to executable:

D:\WINNT\cluster\clussvc.exe

Startup type: Automatic

Service status:

You can specify the start parameters that apply when you start the servicefrom here:

Start parameters:

PausePause ResumeResume

Cluster Service Properties (Local Computer)

General

OK Cancel

Log on as:

Log On Recovery Dependencies

Local System accountAllow service to interact with desktop

This account NWTRADERS\clustservice

Password: ***************

Confirm password: ***************

ApplyApply

You can enable or disable this service for the hardware profiles listed below.

Browse…

Hardware Profile ServiceProfile 1 Enabled

EnableEnable Disable

Started

Start Cluster

Run [StartProgramCluster ManagerCluster Administration Tool].

Input License

Select “Tools”“License”.

Input the information from license.txt and restart Cluster Manager.

Then run “Tools” “Start Cluster Operation”.

Do the same for the other server.

Start Cluster

Run ［ ToolsStart Cluster Operation ］ to start cluster service on two hosts.

Establish Heartbeat Link

Select［ Private NetTCP/IP Socket］ .


Select［ Private NetTCP/IP Socket］ and do the same on the other server.


Select［ Private NetRS-232 Serial Port ］ and do the below setting on both servers.

Setup Cluster Resources

Dependency relationship between cluster resources

SerAppMa.exe

MSSQLServer

Volume

Computer AliasName

IP Address

MSSQL Agent

Only need to create resources on one server. This server will act as the active server.

Prerequisite

Volume

Select “Resource”“Create”“Volume…”

Select［ Resource］［ Bring In Cluster］ to bring in resource.

IP Address

Select “Resource”“Create”“IP Address…”

Alias Name

Alias Name resource provides a unified computer name to the two servers. External computers and applications access the dual system via the alias name.

Select “Resource”“Create”“Computer Alias Name…”

NT Service

For Billing server， NT Service resource includes “MSSQLServer” and “SQLServerAgent”.

Select “Resource”“Create”“NT Service…”

User Define

For Billing server, User Define resource only includes SerAppMa.exe.

Select “Resource”“Create”“User Define…”

SerAppMa.exe

SerAppMa.exe

OMM Server File DescriptionFilenameFilename DescriptionDescription

SerAppMa.exe Process management program at the background server

zxlogin.exe User logon program

winnttcp.exe MSS communication system program

Ztetool.exe Execution program of the floating toolbar

diarypro.exe Log management program at the server side

mopSrv.exe Performance statistics program at the server side

oamSrv.exe Alarm management system program of the service server at the server side

oaSev.exe Alarm management system program at the server side.

ocCli.exe Base Configuration Management program at the client side

ofCli.exe File management program

ooCli.exe Service observation program

osCli.exe Variable control program at the client side

otCli.exe Signaling trace program

ouSrv.exe User trace program at the server side

ovCli.exe Version management program at the client side

R07SVR.exe Version management program at the server side

R12.exe Diagnosis and test program

OMM Server Database Description

DatabaseDatabase DescriptionDescription

moaMssData.dat Alarm database

modbomcdata.dat Database management database

Mopdata.dat Performance statistics database

Mosdata.dat Variable control database

mouMscVlrData.dat User trace database

movMssData.dat Version management database

R12.dat Diagnosis and test database

zdb_zxj10.dat Base configuration management database

zdb_zxj10_diary.dat Log database

zdb_zxj10_mult.dat Multi-terminal configuration database

zx_right.dat Right management database

Billing Server File,Folder and DB Description

NameName DescriptionDescription

\\Ecdr \ Store error bills generated during coding bills

\\Ftam\ Store bills for the billing center to collect

\\Hotbil\ Store hot billing tickets

\\Hotftam\ Store hot billing tickets for the billing center to collect

\\ObCfg\ Store the configuration files of the bill receiving process

\\Zxgbil\ Store original bills

\\Zxgtemp\ Store the temporary bill files in the bill receiving process

MobWatch.exe Billing monitoring program at the client side

mobwSrv.exe Billing monitoring program at the server side

obSrv.exe Billing management program at the server side

obsrvr.exe Program of the billing receiving process

mobMscVlrData.dat Billing management database

ZXG10-HLR/AUC Software Installation

ZXG10-HLR/AUC Software

DATABASE SERVER

Disk Array

CPM

ServiceServer

OMM SERVEROMM Client Service

Agent Console

ZXG10-HLR/AUC Software

OMM ServerWin2000 Server;MSSQL2000 Server;ZXG10-HLR/AUC OMC Server;

OMM ClientWin2000 Server;MSSQL2000 Client; ZXG10-HLR/AUC OMC Client;

Service ServerWin2000 Server;MSSQL2000 Server; ZXG10-HLR/AUC Service Processing Software;

Database ServerWin2000 Server;MSSQL Server2000; Dual-system Software;


ZXG10-HLR/AUC

OMM Server 129

OMM Client 200~239

Service Server 140~149

Database Server 170 (171,172)

Installation of OMC-Server

Installation of Service Processing Application

Run “Install\Hlr\HlrSetup\Hlrsetup.exe”

Installation of Database Server

Install NT Cluster and create the following resources:IP Address;

Volume;

Alias Name;

NT Service (MSSQLSERVER, MSSQLSERVER AGENT)

Installation of Remote Service Agent

201 202 203 204 205

192.200.1.201

192.200.1.202

192.200.1.203

.

.

.

ZTE HLRdatabase 170

ZTE gateway 200

Far-end service agent

TCP connection

Port No. 3000

IP address

Agent 1

Agent 2

Agent 3

ZTE Gateway detects the TCP connection of remote service agent from Port 3000.


ZTE Gateway assigns an IP address and node code to each service

agent that wants to access HLR database.If a service agent only has one IP address (assigned by ZTE

Gateway), it requests to connect(…) ZTE Gateway Port 3000.

If a service agent has multiple IP addresses, it requests to

Bind(…) before connect(…) to Port 3000 of the gateway. The

binding IP address is the IP address assigned by the gateway.


ZTE Gateway can be an independent server or OMM Server(129).

Example:

Area code of 129=010， Office code=1， Node code=129;

Gateway IP of the ZTE Gateway is 192.80.1.253;

Gateway IP of the other side is 120.1.1.1;

IP of remote service agent is 120.1.1.33;

Node code assigned to the service agent is 201.


Installation Procedure1. Copy file to c:\zxg10\tcpout.exe（ Communication gateway program) of 129;2. Copy file to c:\zxg10\tcpdog.exe（ Communication gateway watchdog） of 12

9;3. Copy file to c:\winnt\tcpout.ini（ Communication gateway config file） of 129;4. Create c:\zxg10\tcpdog.exe in the startup folder of 129;5. Create an IP 192.80.1.200 on 129;6. Create a Gateway 192.80.1.253 on 129;7. Start c:\zxg10\tcpdog.exe。

200 gateway connects to 129.The line connecting 200 gateway and 129 is green. The line connecting 200 to service agent 201 is red.Ping service agent IP 120.1.1.33. If it replies, then the configuration at our side is normal.

Tcpout.ini[Setup]

AreaCode=010

PostOffice=1

LocalNode=200

IsServer=1

IsRemote=0

ListenPort=3000

OMMServer=129

JFServer=129

OMMMp=2

ConnectOMMServer=0

ConnectJFServer=0

ConnectMP=0

AutoCheckApp=1

AutoCheckApp=1

[RemoteInfo]

Remote1=Name (omcserver), N

ode (129)

Remote2=Name (A1), Node (20

1), IP (120.1.1.33), Connect (S)

OMM Server File&DB Description


Dbiosrv.exe HLR agent management system server program

OcCli.exe Base configuration management client program

ochcli.exe HLR configuration management client program

ochsvr.exe HLR configuration management server program

MocHlrData.dat HLR configuration management database

Service Server File&Folder Description


Config Store system configuration file “S10cfg.ini”

Data Store HLR configuration data

Trace Save debugging information file debug.log and error.log

ZXG10_v1 Store HLR service server version program zxg10_hm.exe

ZXG10_v2 Used for upgrading

ZXG10_WTHDOG Store HLR service server watch dog program S10dog.exe and

the debugging output window S10see.exe

ZXG10-SC Software Installation

ZXG10-SC Software

PLMN

EmailServer

WebServer

VM …

OMM Server Service

Agent

TCP/IP

SMPP

OMM Client

Database

SS7

IW/GMSC

Information Station

SMPP Agent

Database

Billing Server

Other SME

Service Server

ZXG10-SC Software

OMM Server

Win2000 Server;

MSSQL2000 Server;

ZXG10-SC OMC Server;

OMM Client

Win2000 Server;

MSSQL2000 Client;

ZXG10-SC OMC Client;

Billing Server

Win2000 server;

MSSQL2000 Server;

ZXG10-SC Billing

System;

Dual-system Software;

Service Server

Win2000 Server;

MSSQL2000 Server;

ZXG10-SC Service Processing

Software;

Dual-system Software;

SMPP Agent Server

Win2000 Server;

MSSQL2000 Client;

ZXG10-SC SMPP Agent Soft;

Dual-system Software


ZXG10-SC

IW/GMSC 2~63

OMM Server 129

OMM Client 200~239

Billing Server 130

Short Message Configuration 133

Service Server 140~147

SMPP Agent Server 160~167

Information Station 150~159

Web/Email 150~152

Query Server 250

Installation of OMC-Server

Installation of Dual Billing Server

Create the following cluster resources:

Volume(M)

IP Address

Alias Name

NT Service (MSSQLSERVER, SQLSERVER AGENT, FTP)

User Define (SerAppMa.exe , Cdrpick.exe )

Select driver M:

Select “Cluster System” in “Configure Cluster” window.

Copy CdrPick.exe to M: and set Post-picking folder to M:;Point FTP service folder to Post-picking folder;

Installation of Service Processing Application

Click the “Scsetup.exe” program under the “Install\Smsc\Scsetup\I386”

Create “Smscdb” and run “smscdb.sql” script under the “Install\Smsc\Config”.

Dual Service Server

Create the following cluster resources:

Volume

IP Address

NT Service (MSSQLSEVER, SQLSERVERAGENT)

Installation of SMPP Agent Application

If cluster is adopted, only “IP Address” resource is required.

Troubleshooting

1. SQL Server is not correctly installed.

Re-install SQL Server.

2. SQL Server logon user password is not correctly set.Reset password.

3. Failure of booting a database during subsystem installation.Cause: repeated installation of the same subsystem.

Solution:use Task Manager to kill the corresponding process, reboot and reinstall.

Reference

ZXG10-MSC/VLR (V3.0) Installation Manual

ZXG10-HLR/AUC(V3.0)Installation Manual

ZXG10-SC(V3.0) Installation Manual

ZXG10-MSC/VLR,HLR/AUC,SC Software Installation. Agenda General Installation Flow ZXG10-MSC/VLR...

Documents

Transcript of ZXG10-MSC/VLR,HLR/AUC,SC Software Installation. Agenda General Installation Flow ZXG10-MSC/VLR...