gills alveoli elephant seals Gas Exchange Respiratory Systems.
Zero Waste Strategies for Gills Onions Sustainable ... · Zero Waste Strategies for Gills Onions:...
Transcript of Zero Waste Strategies for Gills Onions Sustainable ... · Zero Waste Strategies for Gills Onions:...
Zero Waste Strategies for Gills Onions
Sustainable Innovation and Waste Management
A 2010 Group Project Proposal
Researched and Produced by: LeeAnne French Laura Hamman Stacy Katz Yuji Kozaki
Faculty Advisor: James Frew
Zero Waste Strategies for Gills Onions
Sustainable Innovation and Waste Management
Table of Contents
ABSTRACT................................................................................................................... 1 EXECUTIVE SUMMARY............................................................................................2 PROJECT OBJECTIVES………….............................................................................4 PROJECT SIGNIFICANCE........................................................................................5 LITERATURE REVIEW.............................................................................................7
What is Zero Waste?........................................................................................................7 Reduce, Reuse, Recycle.................................................................................................. 8 Motivations.........................................................................................................................10 Strategies for Addressing the Problem........................................................................14 Barriers……………………...………..……………..…...…………..………..….16
APPROACH................................................................................................................ 19 MANAGEMENT PLAN............................................................................................ 24 DELIVERABLES........................................................................................................28 MILESTONES............................................................................................................29 BUDGET......................................................................................................................30
REFERENCES…………............................................................................................31
Zero Waste Strategies for Gills Onions: Sustainable Innovation and Waste Management 1
Abstract
Gills Onions, the largest onion processor in the United States, is committed to achieving zero
waste at their processing facility and administrative office located in Oxnard, California. Zero
waste encompasses a strategy that aims to maximize recycling, minimize waste, and reduce
consumption of materials, energy and water. It is a long-term goal attainable through a
systematic and incremental approach. Gills Onions is motivated to pursue zero waste
initiatives not only because of increasing customer demand, regulatory pressures and economic
incentives but also because it wants to be accountable for its environmental impacts. The
company has already taken steps towards reducing its waste, namely by using onion waste to
produce energy, and is now looking to the Bren School to provide a holistic analysis of their
entire business operation. This Group Project will therefore provide a comprehensive audit
and analysis of all of Gills Onions material, energy and water flows, quantify their waste
streams, and identify opportunities for reduction, reuse, recycling, or material substitution
where possible. By providing Gills Onions with the information and strategic plan requisite
for achieving zero waste, the company will be able to influence other food processors to
follow its example.
Zero Waste Strategies for Gills Onions: Sustainable Innovation and Waste Management 2
Executive Summary
In 2007, the United States generated approximately 254 million tons of municipal solid waste,
and individual generation rates increased to 4.62 pounds per day from 2.68 pounds per day
back in 1960.1 The majority of garbage generated (54%) ended up in landfills.1 While using
landfills to dispose of garbage is considered an acceptable practice, their use has deleterious
environmental and economic consequences including possible groundwater contamination,
consumption of valuable land resources and they promote the permanent burial of natural
resources.2 Landfills are also a significant source of carbon dioxide and methane emissions,
two powerful greenhouse gasses which contribute to global warming.3 Moreover, it is
estimated that in the US, at present generation rates, existing landfills have on average 20
years left of capacity.4 As a result, waste disposal costs are becoming increasingly more
expensive as businesses need to transport wastes longer distances and pay larger tipping fees.5
In 2007 California sent 39.6 million tons of waste to landfills, of which 16% was food
matter.6,7 About half of the food waste produced came from activities related to vegetable
crop production, including food processing and handling.8 Our client, Gills Onions, is the
largest fresh onion processor in the State, and one of the largest in the world. Located in
Oxnard, California, Gills Onions peels, slices, and dices more than 100,000 tons of onions
per year. Unfortunately, 37% of the onions processed cannot be used by customers and
instead are discarded as waste. However, since their inception over 25 years ago, the
company has continuously sought ways to minimize their environmental impact, conserve
natural resources, and follow a path of sustainable development. Rather than send their
onion waste to the landfill, they returned it to the soil via land application. But as volumes
increased and waste disposal costs rose, this practice was no longer feasible. As a result, the
company is currently implementing a proprietary process to convert onion waste into clean
energy for their operations and is developing other products from their onion wastes which
will reduce waste, open new market opportunities, and increase profitability.
While Gills Onions is taking steps to reduce their environmental impact by eliminating onion
waste, their processing facility and administrative offices still generate approximately 500
tons per year of non-onion waste. Many of these materials that end up in the landfill can be
recycled, composted, or reused. Unfortunately, efforts to implement a company-wide
Zero Waste Strategies for Gills Onions: Sustainable Innovation and Waste Management 3
recycling program have been unsuccessful and composting and reuse programs have yet to
be implemented. In addition, Gills Onions currently generates a large volume of consumer
packaging material, and as the source of these materials has a responsibility to ensure that
their impact is minimized.
Gills Onions believes that in order to truly operate sustainably, they must take full
responsibility for identifying reduction or re-use opportunities for all materials produced or
consumed in their operational processes, as well as those distributed to customers. To
accomplish this, Gills Onions has set a goal of achieving zero waste by 2010. Zero waste
encompasses a strategy that aims to maximize recycling, minimize waste, and reduce
consumption of materials, energy and water.9 By implementing a comprehensive recycling
program, expanding their waste reduction initiatives and quantifying their energy and water
consumption, Gills Onions will be able to reduce waste, improve process efficiencies,
increase profitability, and set an example for others in the industry to follow.
While Gills Onions is committed to achieving zero waste, its ability to do so is hampered by
several important factors, including sufficient dedicated internal resources, information
needed to identify the best alternatives for their waste streams, a systematic, rigorous,
quantitative approach, and the analytical tools that are required for success.
The purpose of this Group Project will be to provide Gills Onions with the information,
strategy and methodology it needs to implement a zero waste program by 2010 at its
processing facility and administrative offices. The Bren team will conduct a comprehensive
audit and analysis of all of Gills Onions material, energy and water flows, quantify their
waste streams, identify opportunities for reduction, reuse, recycling, or material substitution
where possible, and provide a reference guidebook on achieving zero waste that Gills
Onions can share with others in the industry. By providing Gills Onions with the
information and strategic plan requisite for achieving zero waste, it will be able to continue
on a path of sustainable innovation and conservation and serve as an example for the
industry to follow.
Zero Waste Strategies for Gills Onions: Sustainable Innovation and Waste Management 4
Project Objectives
The project’s main objective is to evaluate Gills Onions’ current material, energy and water
flows and identify new opportunities for reducing, recycling, and reusing at their
administrative offices and processing facility. This will be achieved by:
• Auditing and characterizing the materials that flow into and out of both the
administrative and processing facility.
• Identifying source reduction and reuse opportunities both internally and with
suppliers.
• Helping to facilitate the start up of both a recycling and composting program.
• Documenting and quantifying total water and energy used in order to establish a
baseline and highlight opportunities for potential improvements.
• Quantifying current and potential financial investments and savings that can be
achieved from the waste reduction program.
• Developing quantitative monitoring and evaluation methods to track and measure
Gills Onions waste reduction efforts and results over time.
• Documenting procedures and achievements in a ‘Guidebook’ so that Gills Onions
can be used as an example for other companies to follow.
In order to accomplish these objectives, we will conduct material, energy, and water audits,
construct mass balances, and utilize analytical methods such as environmental cost accounting,
green supply chain management, and review existing life cycle analyses as appropriate. In
addition, we will develop financial models that incorporate internal expenditures and savings
generated, to rank our recommendations based on returns on investment.
A final report and presentation will provide an evaluation of Gills Onions various waste
streams and their origins, opportunities for waste reduction, reuse, or recycling, as well as
short-term and long-term strategies for implementing a zero waste plan by 2010.
Zero Waste Strategies for Gills Onions: Sustainable Innovation and Waste Management 5
Project Significance
Enabling Gills Onions to achieve zero waste will have significant implications beyond the
scope of our group project. Gills Onions has an opportunity to take a leadership role and set
an example for the entire Californian Food Processing Industry to follow. California is the
food processing center of the Nation, shipping more than $50 billion dollars worth of food
products each year.10 The industry is characterized by the use of both advanced technology
and leading edge management practices.11 However, the industry also generates enormous
amounts of waste and no food processor to date has attempted to achieve zero waste.
As customers increasingly demand “green” products and practices from the companies they
buy from, as waste disposal costs rise and as businesses increasingly face regulatory pressure
to reduce their waste streams, there will be an increasing interest amongst businesses to
implement zero waste initiatives. Zero waste practices are a catalyst for change as
organizations realize that reducing waste not only helps reduce costs and improve process
efficiencies but also reduces environmental impacts. Increasingly, businesses will be
motivated to reduce or eliminate waste, modify production processes, implement
conservation techniques and increase material and reuse strategies.
Gills Onions can use its zero waste story as a case study for others in the food processing
industry to follow. Its zero waste methodology will outline a new business strategy
characterized by operational systems that minimize waste and inefficiencies and in turn are
more environmentally sustainable. Gills Onions’ zero waste initiatives and success will easily
be seen as a natural extension of ongoing total quality management.
Attention is already being directed to Gills Onions. They are currently receiving increasing
attention for being the first in the industry to successfully implement an Advanced Energy
Recovery System, a system designed to convert their largest waste stream, onion waste, into
energy. Gills Onions is therefore well positioned to extend their leadership role to
encompass zero waste as well. Through Gills Onions’ example, others in the industry will
recognize the benefits from further reducing their waste streams. They will have factual
evidence that zero waste strategies are practical, enable cost reductions, improve efficiencies,
Zero Waste Strategies for Gills Onions: Sustainable Innovation and Waste Management 6
minimize environmental impacts, and improve a company’s overall “green” image. Gills
Onions will be able to lead the food processing industry on a path to sustainable growth.
Zero Waste Strategies for Gills Onions: Sustainable Innovation and Waste Management 7
Literature Review
Zero waste is a long-term goal attainable through a systematic and incremental approach. It
requires continuous improvement, innovation and creativity – traits that are exemplified in any
successful business. Embracing a zero waste goal requires that Gills Onions take a life cycle
view of its products and business operations, ensuring that all materials flowing through the
business and to its customers are properly accounted for and, at the end of their life, are
recycled back into nature or the marketplace. A zero waste strategy calls for ensuring that
supplies used, products sold, and packaging materials are carefully specified to reduce the total
amount of resources needed, to be used for as long as possible and to provide opportunities
for reuse, biodegradation or recycling when at the end of their useful life.
In addition to focusing on material use, a zero waste goal also draws attention to water use and
energy efficiency. Improvements in water and energy efficiency can be made through process
and production improvements that focus on reducing initial consumption and recycling these
resources where possible. Such process improvements might include recycling water within
the production process, reusing degraded water for downstream activities or cogeneration in
energy systems.
Reducing material, water and energy waste requires ongoing improvements as well as the
identification of innovative alternatives that become part of an overall business strategy.
Ultimately, a zero waste initiative helps to ensure energy, water, and material flows are
operating as efficiently as possible, that fewer resources are required, and that Gills Onions
becomes more sustainable by reducing costs and environmental impacts.
What is Zero Waste?
A zero waste strategy aims to maximize recycling, minimize waste, reduce consumption and
ensure that products are made to be reused, repaired or recycled back into nature or the
marketplace.9 The GrassRoots Recycling Network has outlined ten key principles designed
to help guide businesses in their efforts to establish zero waste policies and programs.
Among these principles is a commitment to the triple bottom line (people, planet and profit),
sending zero waste to the landfill or incineration, and assuming responsibility for taking back
products and for packaging.12
Zero Waste Strategies for Gills Onions: Sustainable Innovation and Waste Management 8
The objective of achieving zero waste is not impractical and zero waste initiatives are
increasingly being adopted by businesses, cities, and countries around the world.13 For
example, Wal-Mart, Xerox, Toyota, Nike, the cities of San Francisco, Seattle, Boulder,
Buenos Aires and 40% of New Zealand’s local governments are just some of the entities that
have recently established zero waste goals.14 In addition, through the United Nations Urban
Environmental Accords, 103 city mayors worldwide have committed to sending zero waste
to landfills and incinerators by the year 2040 or earlier.15
Reduce, Reuse, Recycle
There are several approaches that Gills Onions can employ that will enable them to work
towards a zero waste goal. These strategies include reducing, reusing, recycling, composting
and substituting less impactful materials for more harmful ones where possible. These
strategies have been commonplace in the United States since the 1970s.16
Reduce
Waste prevention is often prioritized as the most important strategy for minimizing waste.17
Waste prevention, also known as source reduction, refers to any strategy that incorporates a
change in the design, manufacturing, purchase, or use of materials (including packaging) to
reduce their amount before they are discarded. For example, strategies for reducing
packaging material may include making it simpler, lighter or smaller, or completely
eliminating unnecessary packaging elements. Generally, if operations, manufacturing
processes, or activities are altered to ensure the prevention of waste, raw materials and the
cost per unit of production are also lowered.18 Since source reduction of resources and
packaging can save money by reducing materials and energy, manufacturers and package
designers have been pursuing these strategies for many years and established methodologies
exist for identifying new source reduction strategies.
In terms of water and energy use, reductions can be made through process improvements
that work to eliminate unnecessary flows, by repairing leaks, engaging in conservation
strategies and good housekeeping practices and by investing in energy efficient equipment.
Zero Waste Strategies for Gills Onions: Sustainable Innovation and Waste Management 9
Reuse
Reuse is another strategy that Gills Onions can employ to reduce waste. Reuse involves the
recovery or reapplication of a resource, package or used product in a manner that retains its
original form or identity. The ideal place to reuse wastes is within the processing and
administrative facilities themselves. Significant reuse opportunities exist where waste
streams from water can be reused within other operations of the facility. For example,
degraded water can be recovered and used for downstream activities such as wastewater
which can be recycled back into operations and used for irrigation or cooling.19 Waste heat
can also be captured and reused in processes. Strategies for material reuse include replacing
disposable items with those that are reusable such as pallets, sacks, and containers, etc.
Waste reduction can also be achieved by designing equipment, materials and other goods so
that they are designed from the beginning for reuse. This strategy is referred to as design for
the environment and incorporates techniques that are used to identify the environmental
impact of a product throughout its life cycle and focuses on pollution prevention strategies.20
Recycling
Gills Onions can further reduce their waste streams through recycling. Recycling refers to
the recovery of resources and materials from a previous waste stream for use as raw material
in the manufacture of new products or processes.21 Recycling of beverage containers (plastic,
aluminum and glass) is very familiar, however recycling also applies to energy and water
including the recycling of residual organic wastes used for energy, or sludge from a
wastewater treatment plant used as fertilizer. Recycling has environmental benefits at every
stage in the life cycle of a product.1
The environmental benefits from recycling material waste include diverting resources from
the landfill, lowering greenhouse gas emissions, reducing the air and water pollution
associated with making new products from raw materials. In addition, the use of recycled
materials requires less water and energy than manufacturing products from virgin materials.22
In 2007, the United States recycled 33.4% of its municipal solid waste which included
composted material.1 Many different materials can be recycled although each type requires a
Zero Waste Strategies for Gills Onions: Sustainable Innovation and Waste Management 10
different process. Materials that are commonly recycled include batteries, glass, metals,
plastics, paper, textiles, timber, electronics, tires, rubber, leather, as well as aggregates and
concrete.13 Biodegradable waste – such as food and yard waste can also be recycled into
useful material by composting. Most composting is done on a household scale, but
municipal green-waste collection programs also exist. In addition to traditional materials,
some companies have been innovative, taking back used products and turning them into
recycled products.12 For example, Nike collects worn-out footwear and grinds them up to
make athletic courts and Stonyfield Farms takes back yogurt cups and turns them into
toothbrushes.
Material Substitution
The potential for waste reduction also exists when materials can be substituted with others
that can be either recycled or composted (biodegradable). Among other materials, a vast
range of oil-based polymers is currently used in packaging applications.23 As a result,
packaging materials often are non-biodegradable and are particularly difficult to recycle or
reuse due to mixed levels of contamination and complex composites. In recent years,
however, the development of biodegradable packaging materials from renewable natural
resources (e.g. crops) have been created with similar functionality to that of the oil-based
synthetic polymers.24 Potentially, substituting existing packaging materials with those made
from biodegradable materials could reduce their need to end up as a waste stream.23
In addition to the aforementioned reduction strategies, numerous other approaches can be
employed to achieve zero waste at Gills Onions. These include purchasing recycled content
or environmentally preferable products, instituting producer take back programs, and
redesigning supply, production, and distribution systems to reduce resource consumption,
among others.
Motivations
Beyond wanting to be a good steward of the environment, Gills Onions’ zero waste initiative
is a response to the customer, government and cost pressures that businesses across the US
are facing.
Zero Waste Strategies for Gills Onions: Sustainable Innovation and Waste Management 11
Customer Demand
While buying behavior does not always match stated preferences, customers continue to
demand “green” products and are looking to do business with companies with sustainable
business practices.25 While demand for sustainable practices from Gills Onions’ customers is
anecdotal, there is clear evidence that businesses are increasingly being asked to green their
supply chains and to improve environmental stewardship.26 For example, to reduce waste by
25% at its retail stores, Wal-Mart, the world’s largest retailer, is putting pressure on its 60,000
suppliers to reduce packaging and, in the case of food product providers like Gills Onions,
to convert to corn-based packaging from plastic because it is biodegradable.27
Increasingly, businesses are also responding to customer inquiries about sustainable practices
and opportunities exist for companies to highlight their ‘greenness’ using numerous eco-
labeling schemes.28 Steve Gill, President and co-founder of Gills Onions, recognizes that
environmental stewardship provides an opportunity to differentiate products and services
from other suppliers and wants to take advantage of this increased market potential. “If
customers want to be sustainable themselves, they will have to buy from us because we are
the most sustainable producer. We can show them how it is done.”29
Regulatory Pressure
Beyond consumer demands, Gills Onions also foresees increasing regulatory pressure to
reduce their waste streams. With the passage of the Pollution Prevention Act of 1990,30 the
US Congress stepped up its efforts to encourage businesses to reduce or eliminate waste at
the source by modifying production processes, implementing conservation techniques and
increasing material reuse strategies. As a result, the EPA has created numerous partnership
programs such as the Green Chemistry Initiative which fosters the exchange of information
amongst members related to waste reduction practices, sponsors research to support
industry’s efforts to substitute less impactful materials, and provides incentives and visibility
for members’ efforts.31
In 1994, EPA established the WasteWise program which is designed to partner with
businesses, state and local governments and institutions to reduce municipal solid waste.
EPA provides information resources and visibility for its partner’s voluntary efforts and
Zero Waste Strategies for Gills Onions: Sustainable Innovation and Waste Management 12
encourages businesses to reduce the amount of materials used, increase recycling within their
organization, and buy or manufacture recyclable products.32 More recently the EPA
established the Resource Conservation Challenge (RCC), a nationwide effort to renew and
revitalize the nation’s goals of pollution prevention, waste reduction, reuse, and recycling.33
One of the main goals of RCC is to help the nation achieve a recycling rate of 40% by 2011.
While most of the federal programs in the US are voluntary, the UK, Germany and other
EU countries have instituted a myriad of mandates, levies and incentives to require increased
waste diversion, recycling and alternative energy investments. 34 35 36 Some believe that it will
not be long before the U.S. Federal Government too initiates Federal mandates.
Meanwhile, many States have followed the lead of the Federal government and encouraged
waste reduction initiatives. Specifically, in 1989 California passed the Integrated Waste
Management Act (AB 939).37 At the time, California was disposing of 90% of its waste and
recycling only 10%.38 The new law established the California Integrated Waste Management
Board (CIWMB) and mandated that cities reduce waste to the landfill by 25% by 1995 and by
50% by 2000. Today, CIWMB goes beyond reduce, reuse and recycle and supports Zero
Waste California.39 This broad reaching initiative challenges cities to go zero waste, provides
businesses with information, incentives and an innovative materials exchange portal (CalMAX)
so that businesses can more easily identify markets for their waste streams.40
While most of California’s programs have been voluntary to-date, new formal legislation has
recently been proposed. On April 12, 2009, the requirement for extended producer
responsibility was included as part of the California Product Stewardship Act (AB 283). If
passed, AB 283 will require producers to identify alternatives during product and packaging
design “to foster cradle-to-cradle producer responsibility and reduce the end-of-life
environmental impacts of the product.”41The ultimate goal being to reduce the amount of
waste sent to landfill.
California’s waste reduction efforts are more important than ever as concerns over global
climate change mount, not only because of the greenhouse gas emissions from landfills but
also because of the energy efficiency gain achieved by reducing waste at the source and
minimizing reliance on virgin materials.42 In the absence of Federal legislation on climate
Zero Waste Strategies for Gills Onions: Sustainable Innovation and Waste Management 13
change over the past 10 years, California has taken the lead. In 1998, the California Energy
Commission was required to do an inventory of California’s GHG emissions as a baseline.
Two years later, the California Climate Action Registry (now a part of the North American
Climate Registry) was created by law to provide businesses with a consistent methodology for
calculating and verifying GHG emissions, and voluntarily establishing and reporting reduction
goals.43 44 These laws laid the groundwork for the Global Warming Solutions Act of 2006 (AB
32), landmark legislation which sets into motion a comprehensive plan involving all sectors of
the economy to achieve GHG emissions reductions to 1990 levels by 2020.45 The AB 32
Scoping Plan was approved in 2008; the pursuant regulations, standards and incentives will go
into affect by 2010. Several measures contained within the scoping plan may affect Gills
Onions directly or indirectly including energy efficiency and emissions requirements,
transportation regulations (Gills owns 22 semi-trailer trucks), water use efficiency standards,
new extended producer responsibility requirements, recycling, and zero waste mandates.46
Economic Pressures
While California’s businesses are anticipating and preparing for new regulations to be
promulgated from AB 32, there are also economic reasons why a zero waste strategy makes
good business sense. For years, businesses have recognized that the elimination of waste is
synonymous with quality improvement.47 As the quality and efficiency of internal processes
improve, costs decrease. During times of economic recession, businesses are especially
motivated to look more closely at their operations to identify potential costs savings by
reducing material waste, and improving energy efficiency.
Like the rest of the country, energy efficiency is becoming increasingly important to California
businesses. California’s average electricity costs across all sectors have risen 44.8% since 1990
and are expected to increase between 20-29% by the year 2020. 48 49 However, as the cost of
energy rises, so does the price of water.50 As the largest onion processor in the US, Gills
Onions has enormous energy and water requirements. To mitigate the impact of rising
electricity costs, Gills Onions is proactively pursuing alternative energy projects specifically
converting onion waste to biofuels and leveraging statewide RD&D programs, incentives and
rebates to offset the initial capital investments.51 By taking advantage of efficiency and capital
Zero Waste Strategies for Gills Onions: Sustainable Innovation and Waste Management 14
improvements, Gills, much like other businesses, not only is able to improve their competitive
advantage but is also more easily able to position themselves as an industry leader.
Gills Onions recognizes that additional opportunities still exist within their business where
waste streams are being generated. Realizing that the efficient use of natural resources saves
money, and that environmentally preferable purchasing, employee recycling, composting and
packaging alternatives present additional opportunities to reduce costs, Gills Onions is
motivated to reduce waste, increase profitability and improve its environmental performance.
Strategies for Addressing the Problem
There are several strategies that organizations employ to try to solve issues related to waste
streams.
Inputs & Outputs
In order to identify what materials are coming into an operation and what materials end up
leaving, audits and mass balance analyses are often employed.52 To evaluate material inputs,
common practices look at purchasing and receiving logs and to identify outputs, a waste
audit is commonly used. A waste audit, also known as a waste disposal characterization, is a
method used for collecting data on the waste stream. It can be used to assess waste
minimization opportunities and to measure the types and amounts of materials in the waste
stream at a particular facility.53 In California, the CIWMB provides guidelines on how to
conduct a waste disposal characterization as well as to how to analyze the data.54 In addition
to identifying material flows, energy and water audits are also utilized for identifying the
consumption of these resources.
Life cycle assessment
One way to analyze alternatives to reduce waste streams is through life cycle assessment
(LCA). LCA is a “cradle-to-grave” approach for measuring the total impacts of a product.
LCA enables the estimation of the cumulative environmental impacts resulting from all
stages in the product life cycle, often including impacts not considered in more traditional
analyses.55 LCA analyses have been completed for numerous packaging types and material
categories and are published in the scientific and business literature. The growing set of
Zero Waste Strategies for Gills Onions: Sustainable Innovation and Waste Management 15
completed LCA’s enable companies to embed life cycle thinking into their preliminary
decision making without having to conduct costly and time consuming LCA analysis on
every individual product, process or material decision.
The use of LCA is widely accepted and as a result, companies in all sectors are making
decisions based on this type of analysis. For example, Coca-Cola, based its decision to use
plastic bottles on an LCA that revealed fewer hydrocarbon resources (oil or natural gas
derivatives) used with plastic as opposed to glass.56 Toyota currently uses LCA to quantify
and assess the environmental impacts and financial costs of its packaging systems and makes
improvements wherever possible.57 However, while LCA is widely used, the methodological
approaches vary depending on the initiators interests and objectives. Therefore, an
important consideration for using previously conducted LCAs is to ensure that the
comparative data is sufficiently matched so that accurate conclusions can be drawn.58
Green Supply Chain Management
Another strategy commonly used to identify waste reduction opportunities is green supply
chain management. Green supply chain management is a comprehensive supply chain
strategy that links environmental performance to overall business goals. In the greening of
supply chains the economic objectives from conventional supply chains are extended to
include environmental objectives, potential impacts and estimated costs into consideration
simultaneously.59 In this strategy, businesses look to their supply chains to identify where
environmental improvements can be made upstream or downstream in the products and
services their suppliers are providing. By using green supply chain management businesses
are able to reduce the waste from obsolescence and the cost of from the maintenance, repair
and operation (MRO) of wasted materials through enhanced sourcing and inventory
management practices. Companies can thereby decrease the costs associated with scrap and
material losses, and recover valuable materials and assets through efficient product take back
programs.60
Green supply chain management can be an effective strategy for reducing material waste but
is dependent upon environmental pressures, objectives and cost/benefit assumptions, firms’
capabilities, and the influence of the anchor business over its suppliers.
Zero Waste Strategies for Gills Onions: Sustainable Innovation and Waste Management 16
In sum, numerous strategies exist to identify zero waste opportunities. Amongst others,
these include audits and mass balance analyses of materials, water and energy resource flows.
Based on the accumulated baseline data, priorities can be established and further analysis
conducted on the highest leverage waste streams. By using currently available LCA analyses
and green supply chain methods potential alternatives can be evaluated and provide a
framework for recommendations.
Barriers
While achieving zero waste is an attainable long-term goal, technical issues, economic
considerations, product quality concerns, and health safety requirements can all serve as
prominent barriers to success.
Technical and Economical feasibility
While a zero waste goal strives for reusing and recycling to the maximum extent possible,
unfortunately not all materials can be reused or recycled, others are very difficult to recycle
and for some materials, markets do not exist or are not accessible.61 For example, some
materials that cannot be recycled include Styrofoam®, some high grade plastics, waxed or
laminated papers that are contaminated, plate glass and mirrors. In addition, materials with
mixed levels of contamination or those made from complex composites tend to be difficult
to recycle.23 Moreover, certain requirements must be met in order for recycling to be
economically feasible and effective. Firstly, an adequate source of recyclable material needs
to exist and a system needs to be in place to extract that material from the waste stream.
Secondly, a readily accessible facility capable of reprocessing the material has to be available.
Finally, potential demand for the recycled material needs to exist. If all of these components
are not in place, recycling will be incomplete and in fact only be "collection".62
While the types of materials and quantities that can be recycled is growing, markets for
recycled materials are not pervasive and in some areas are still relatively small.63 Additionally,
markets for recycled products are particularly sensitive to economic conditions and in the
case of plastics, to the price of oil. The size of the recycling market fluctuates with economic
cycles and can shrink substantially during a recession.64
Zero Waste Strategies for Gills Onions: Sustainable Innovation and Waste Management 17
Product Quality
Maintaining product quality can also be a significant barrier to achieving zero waste
particularly in the food processing industry where shelf life, tamper resistance, and food
safety issues are paramount concerns. The decision to achieve zero waste necessitates that
Gills Onions evaluate the materials used in its production process and consumer packaging.
However this desire needs to be balanced to ensure that products are contained and
protected adequately, prevented from spoiling, branded and marketed with enough
information to relay relevant information, tamper resistant, traceable, and convenient for
customers.65 With a product such as onions, the packaging also needs to breathe to prevent
moisture build up, while not allowing odors to escape.
Health Safety
Another barrier to achieving zero waste in the food processing industry is compliance with
National and State health safety requirements. These requirements often mandate that
hygiene be maintained and that materials be regularly cleaned or changed frequently and are
often prevented from reuse.66 For example, gloves are required but have to be discarded
immediately upon contact with the face; hairnets have to be worn and discarded, and
materials used for testing are single-use only. As a result, to keep the food safety risk low,
food processors often can consume more disposable resources than are desirable and can be
constrained in the types of materials that they are able to use.
Strict health and safety requirements also apply to the production process itself and require
frequent and careful cleaning and sanitizing of all equipment. While necessary to prevent the
contamination of food by Salmonella, Listeria monocytogenes, E. coli or any other pathogens, the
cleaning and sanitizing processes can require additional energy and water resources as well as
the use of detergents and chlorine.67 These are important considerations when identifying
process improvements, water and chemical reduction opportunities, and material
substitution alternatives.
In summary, a zero waste goal is not impracticable and numerous opportunities exist to
minimize waste by reducing, reusing and recycling energy, water and materials. Key
Zero Waste Strategies for Gills Onions: Sustainable Innovation and Waste Management 18
customer, regulatory and economic motivators are driving organizations toward zero waste
initiatives and a number of strategies are available to aid with analysis and decision making.
However, it is important to recognize that key barriers to achieving zero waste also exist,
specifically in the food processing industry, and these need to be taken into careful
consideration when working to achieve zero waste initiatives.
Zero Waste Strategies for Gills Onions: Sustainable Innovation and Waste Management 19
Approach
In order to recommend a zero waste plan for Gills Onions we first need to understand what
resources and materials are being used by the company and establish a baseline for each
waste stream. Secondly, we will work to identify opportunities to reduce waste through
resource reduction, reuse, and recycling, improved efficiency, and material substitution. Our
final recommendations will be compiled in a final report to the client.
1. Identify the System
• Identify which physical components of Gills Onions processing and administrative
facilities are going to be included in our evaluation. This will include all of the
buildings and structures that are involved in the operations of the business and are
associated with activities that utilize resources.
� We will consult with Gills Onions to identify these structures and obtain a
map, blueprints or a listing of all the facilities and their square footage.
Examples include processing facility, administrative offices, shed, packaging
storage, wastewater treatment, anaerobic digester, fuel cell and power
generator.
� Decide which components will be included the assessment and provide
rationalization.
2. Specify which materials and resources we will be evaluating:
• Identify all materials to be evaluated, determine how they will be categorized
and identify units of measurement.
• Identify all sources of water and energy that will be included
• Indicate what equipment and processes will be considered and the
boundaries of each process.
• Identify fuel, oil, lubricants, chemicals and other resources that will be
included in the evaluation
• Determine how we will quantify, characterize each waste stream and its
associated costs.
3. Identify what is coming into the facilities:
• All data will be analyzed on an annual basis.
Zero Waste Strategies for Gills Onions: Sustainable Innovation and Waste Management 20
• Request purchasing & receiving orders from Gills Onions purchasing and
receiving departments and procurement records for maintenance supplies
and equipment.
• Request 2008 to the present records from Gills Onions for all onion
deliveries.
• Consult with heads of each department and Gills Onions to identify other
materials that may not have been accounted for.
• List, quantify and associate costs with all material and resources coming into
the company.
• Perform material and resource tracking through the use of process maps.
4. Identify and understand the processes taking place within the facilities and the resource
consumption involved. For each process listed below:
• Observe and document processes and quantify material inputs. Ask line
supervisors questions about apparent waste to better understand quality
standards versus potential process waste.
• Work with Gills Onions’ engineer to measure energy consumption by
gauging the energy flow from the main electrical panel to each process and
converting energy flow to average kilowatts per hour metric. Also determine
the number of hours a day each process is running on average and whether it
is typically turned off during breaks or between shifts.
• Use existing process flow meters to determine water use. Use visual clues for
signs of process inefficiency (wet floors, visible drips from slough, etc.).
� Receiving: Onions from farms, super cooling, warehousing
� Process 1: Onion top/tail and peel, quality assurance, rinse, bag
� Process 2: slice, quality assurance, bag, pack, tag
� Process 3: chop, dry, quality assurance, bag, pack, tag
� Testing: water quality, bacteria, etc.
• Analyze office, sales, shipping, receiving order tracking processes
• Look at maintenance logs to identify downtime
• Utility bills will be used as one source for water and energy usage and costs
5. Identify and quantify what is going out
Zero Waste Strategies for Gills Onions: Sustainable Innovation and Waste Management 21
• Conduct waste audit for materials (collection over 2 day period), quantify by
weight and characterize each waste stream.
• Identify which waste materials are recyclable– plastic by number (1-7),
aluminum, tin, paper, cardboard, motor oil, tires, ink cartridges, etc. Track
possible reuse opportunities.
• Quantify and characterize food waste from lunchrooms for compost
potential.
• Quantify by weight remaining non-recyclable trash, and characterize potential
to recover in the future for reduction, reuse or recycle
• Measure waste heat in BTUs (work with engineer) from sources such as the
fuel cells and ammonium cooling generators, investigate opportunity for
potential energy cogeneration
• Measure waste water flows out of the processing facility by volume, quality
(BOM) and temperature and identify onsite waste water processing capacity.
Investigate opportunity to reuse water within each process and from the
waste water treatment system.
• Measure onion waste stream at each point in the process (see process list
above) as well as cumulative over one day. Check shipping records for onion
waste solids sold to dairies over past year. Measure volume of onion juice
extracted daily from onion waste. Use visual clues to identify potential
process improvements.
• Confirm using shipping records, the total customer shipments by weight over
the past year. Also segment shipment volumes by packaging size and type.
• Audit invoice records for disposal rates and quantities
6. Synthesize and visualize information collected
• Identify root causes of wastes by constructing cause-and-effect diagrams or
by asking why certain procedures exist.
• Visualize material, water and energy usage via mass balance model for entire
operation and for individual processes.
• Quantify material, water and energy wastes and create the baseline for each
waste stream from which progress towards zero waste will be benchmarked.
Zero Waste Strategies for Gills Onions: Sustainable Innovation and Waste Management 22
• Use pareto diagrams and other bar charts to display environmental costs by
activity and to rank opportunity areas by value
7. Prioritize opportunities for further analysis of waste reduction alternatives based on:
• Greatest potential for waste reduction by volume
• Client’s business requirements and preference
• Cost savings
• Environmental impacts
• Group members’ areas of interest
• Feasibility
• Time constraints
8. Analyze the selected priority, highest leverage opportunities to reduce waste using the
appropriate methods:
• Green Supply Chain Management approach
• Environmental Cost Accounting
• Energy and water efficiency analysis
• Utilize existing life cycle assessments to compare possible packaging options,
office supplies (paper) alternatives, cleaning products, disposable vs. reusable
supplies for the processing facility to identify potential material substitution
options. Alternatives will be compared based on environmental impacts
such as global warming potential, toxicity and resource depletion, as well as
cost.
• Evaluate possible engineering alternatives for possible process improvements
and increased water and energy efficiency.
• Interview production personnel to understand potential opportunities for
and barriers to change to better understand feasibility for each opportunity.
9. Determine opportunities and develop specific solution recommendations
• Identify which areas offer the greatest opportunities for improvement based
on above analysis and pinpoint specific solutions that reduce costs and
negative impacts. Need to determine with Gills Onions what the decision
criteria will be based on (i.e. waste reduction, cost, environmental
improvement, etc.)
Zero Waste Strategies for Gills Onions: Sustainable Innovation and Waste Management 23
10. Make Recommendations
• Preview recommendations to clients
• Formalize recommendations in group project report
• Create guidebook for future waste assessments including baseline and
ongoing progress monitoring recommendations
• Package information so that it can be used for awards submissions and
educational materials.
Zero Waste Strategies for Gills Onions: Sustainable Innovation and Waste Management 24
Management Plan
Group Structure and Management
The following roles will be held by one or more of the group members at all times. Additional
roles and activities will be added and this management plan will be updated as required.
Project Manager
This individual is responsible for the following activities:
• Set agenda for each meeting.
• Ensure that group is aware of deadlines and that deadlines are met.
• Retain veto power over decisions.
The Project Manager will serve on a quarterly basis and the role will be rotated among
members throughout the Group Project term. If required at later date, group members can
determine that one group member serve in this role for the entire duration of the project.
Financial Manager
This individual is responsible for managing the Group’s budget, contracting with vendors,
incurring group expenses, and handling all financial transactions. The Financial Manager will
serve in this roll for the entire Group Project unless the group members determine at a later
date that another member should serve in this role.
Internet Manager
This individual will be responsible for creating and managing the group website, responding
to all requests that come in through the website and meeting all deadlines associated with
website related activities. The Internet Manager will serve in this role for the entire Group
Project unless the group members determine at a later date that another member should
serve in this role.
Internship Coordinator
This individual will be responsible for coordinating summer internship positions with Gills
Onions, defining the appropriate activities according to scope of work required and ensuring
Zero Waste Strategies for Gills Onions: Sustainable Innovation and Waste Management 25
that all requisite details are accounted for in terms of start dates, pay scale, pay period, etc.
The Internship Coordinator will serve in this role for the entire Group Project unless the
group members determine at a later date that another member should serve in this role.
Data Manager
This individual is responsible for maintaining all data on the shared drive, keeping records
and documents up-to-date and labeled appropriately and for ensuring quality control
compliance. The Data Manager will serve in this role for the entire Group Project unless the
group members determine at a later date that another member should serve in this role.
Secretary
This individual is responsible for taking notes at all meetings and making notes available to
the Group via posting to the shared drive. The Secretary is also responsible for sending an
email to all group members immediately following a meeting informing the Group of any
action items contained in the meeting notes. The Secretary will serve in this role for the
entire Group Project unless the group members determine at a later date that another
member should serve in this role.
Scheduler
This individual is responsible for scheduling all group and outside party meetings, reserving
rooms and/or equipment as needed and notifying group members of arrangements. The
Scheduler will serve in this role for the entire Group Project unless the group members
determine at a later date that another member should serve in this role.
Advisor: James E. Frew
External Advisors: __________________
__________________
Meeting Structure:
• Meetings will be held twice per week:
o Once per week the Group meets with Advisor
o Once per week the Group meets without the Advisor
Zero Waste Strategies for Gills Onions: Sustainable Innovation and Waste Management 26
• Additional meetings will be scheduled as needed upon consent of all group members.
• The Project Leader will compose and distribute an Agenda to all group members
prior to each meeting.
• The Project Leader will lead the meeting according to the Agenda.
• The Secretary will take Minutes during each meeting and highlight action items.
• Following the meeting the Agenda and Minutes will be saved to the shared drive in a
designated folder and the Secretary will email highlighted action items to the Group.
• Infrequent meetings with the client are sufficient, so we will meet via conference call
once per month. Additional client meetings can be called as needed by the client or
the Group.
Responsibilities of Group Members
Title Group Member Duration
Project Manager Stacy Katz Spring Quarter 2009
Financial Manager Laura Hamman Full Project
Internet Manager Yuji Kozaki Full Project
Internship Coordinator LeeAnne French Full Project
Data Manager Stacy Katz Full Project
Secretary LeeAnne French Full Project
Scheduler Stacy Katz Full Project
Systems to ensure deadlines are met
• The Project Manager will be responsible for ensuring that all group members are
assigned tasks according to upcoming deadlines and that group members are aware
of what needs to be accomplished and by when.
• During each meeting it will be the responsibility of the Project Manager to review
upcoming deadlines w/status and to ensure that deadlines will be met.
• The Secretary will be responsible for recording action items in the minutes and
distributing via email to all group members following each meeting.
Conflict Resolution Process
In order to alleviate any unnecessary conflict we agree to the following principles:
Zero Waste Strategies for Gills Onions: Sustainable Innovation and Waste Management 27
• Show respect for one another
• Engage in active listening
• Avoid any one person dominating the group dynamics
• Not to talk behind each other’s backs
However, if a conflict is to arise the following steps will be taken:
1. The upset party will, individually, address the injuring group member and peacefully
and professionally address the issue. A solution to the problem should initially be
agreed upon between the two parties to prevent the issue from recurring.
2. If step 1 doesn’t work, the group member who is upset should bring the issue to the
group and have an open discussion to try to find resolution.
3. If step 2 doesn’t work, depending on the matter, the Group should either bring the
issue to the committee chair, advisor or another relevant third party.
Procedures for documenting, cataloging, and archiving information
• All documents will be stored online in our shared folder. Folders will be used for
separate categories of data (e.g. agendas, industry analysis, literature review).
• All documents will be titled as following protocol “Name of Doc_V#”
• Documents should always be marked up using track changes and all working
documents should be kept in track changes mode.
• Final versions should be labeled “Name of Doc_VFinal”
• All group members are allowed to edit and update all documents.
• The contact database will be managed by Stacy Katz.
• Updated schedules should be maintained on Corporate Time.
• Meetings should be blocked out on Corporate Time.
Guidelines for interacting with faculty advisors, external advisors, clients
• Meetings will be held with our Advisor, James Frew, on a weekly basis.
• Our Advisor has indicated that he prefers not to micromanage our activities and
instead requests that we take the lead on group management and all other activities
related to the project.
Zero Waste Strategies for Gills Onions: Sustainable Innovation and Waste Management 28
• All interactions with advisor, client or other outside parties should be conducted in a
polite, friendly and professional manner.
Deliverables
This project will be an important element in Gills Onions’ ability to achieve its goal of zero
waste. In addition to an oral presentation, the main deliverable for this project will be a final
report that includes:
• Baseline information about Gills Onions material, water and energy use.
• Methods and procedures for calculating material, water and energy use.
• Zero waste strategy recommendations that can be implemented by Gills Onions in
their processing and administrative facilities.
Additionally, we will produce a final guidebook that includes baseline information about
Gills Onions material, water and energy use; strategies that can be employed to further
reduce the company’s waste streams and methods for monitoring progress.
Zero Waste Strategies for Gills Onions: Sustainable Innovation and Waste Management 29
Milestones
Spring Quarter - 2009
Task Deadline
Final Proposal To Review Committee May 26, 2009
Final Proposal Review Completed June 4, 2009
Web Site Operational and Up-to-Date June 8, 2009
Final Proposal Submitted June 11, 2009
Submit Self-Peer Evaluations June 11, 2009
1 page summary of proposal review meeting June 12, 2009
Summer - 2009
Task Deadline
Create Project Plan June 12, 2009
Gills Materials Waste Audit June 12, 2009
Climate Registry, 2008 Submission & 2009 to-date June 30, 2009
Recycling & Composting Program Elements Complete July 31, 2009
Packaging Materials Audit August 28, 2009
Onion Waste Audit – historical/planned August 28, 2009
Processing Facility Energy and Water Audits September 15, 2009
Office Energy Use Audit September 15, 2009
Fall - 2009
Task Deadline
Team Progress Review September 30, 2009
Baseline for Zero Waste Documented October 15, 2009
Establish Parameters for “Guidebook” October 22, 2009
Material Reduction Analysis and Recommendations November 9, 2009
Complete Packaging Analysis and Recommendations November 9, 2009
Complete Energy Analysis – before/after AERS and Recommendations November 9, 2009
Complete Water Analysis and Recommendations November 9, 2009
Complete Preferred Purchasing research – office, “green” cleaning and
process plant supplies
November 9, 2009
Progress Review November 13, 2009
Progress Report on Recycling & Composting Program December 1, 2009
Written Progress Report December 4, 2009
Submit Peer Evaluations December 4, 2009
Zero Waste Strategies for Gills Onions: Sustainable Innovation and Waste Management 30
Winter – 2010
Task Deadline
Create Project Defense Presentation February 1, 2009
Project Defense TBD
Draft of Final Report to Advisor February 15, 2009
Program Abstract to GP Coordinator March 10, 2009
Final Report Signed by Advisor & Submitted March 19, 2009
Project Brief Submitted March 19, 2009
Submit Self/Peer Reviewed Evaluations March 19, 2009
Submit Advisor Evaluations March 19, 2009
Spring – 2010
Task Deadline
Draft Power Point Submitted to Advisor 1-2 weeks prior to GP presentation
Public Project Presentation TBD
Budget
Project Performance Costs Presentation & Printing Costs
12 Trips to Oxnard, CA (100 miles x $.55/mile x 12 trips)
$660 Printing $200
Parking $30 Final Poster Production $300
Subscriptions & Research Materials $200 Presentation Expenses $50
Flash Drive $30 Business Cards $20
Phone calls $30
Total Project Performance Costs $950 Total Presentation & Printing Costs
$570
Total Project Costs $1520
Zero Waste Strategies for Gills Onions: Sustainable Innovation and Waste Management 31
References
1 US EPA. “Municipal Solid Waste in the United States 2007 Facts and Figures.” Nov 2008. <http://epa.gov/osw/nonhaz/municipal/pubs/msw07-rpt.pdf>.
2 El-Fadel, Mutasem, Angelos N. Findikakis, and James O. Leckie. “Environmental Impacts of Solid Waste
Landfilling.” Journal of Environmental Management 50.1 (1997): 1-25. 3 Taylor, David. “Talking Trash: The Economic and Environmental Issues of Landfills.” Environmental Health
Perspectives 107.8 (1999): A404-A409. 4 Hanson, David, and Frank Caponi. “US Landfill Disposal the Big Picture” MSW Management. Accessed 21
May 2009. <http://www.mswmanagement.com/elements-2009/us-landfill-disposal.aspx>. 5 O'Connell, Kim. “Crossing the Lines.” Waste Age Jun 2006: 40-43. 6 “California's 2007 Per Capita Disposal Rate Estimate.” Accessed 21 May 2009.
<http://www.ciwmb.ca.gov/LGcentral/GoalMeasure/DisposalRate/2007/default.htm>. 7 “Food Scrap Management Home Page.” 21 May 2009 <http://www.ciwmb.ca.gov/FoodWaste/>. 8 Matteson, Gary C., and B.M. Jenkins. “Food and processing residues in California: Resource assessment and
potential for power generation.” Bioresource Technology 98.16 (2007): 3098-3105. 9 Grassroots recycling network. “Zero Waste FAQ - What is Zero Waste?.” Accessed 5 May 2009
<http://www.grrn.org/zerowaste/zerowaste_faq.html>. 10 California League of Food Processors. “The California Food Processing Industry.” Accessed 25 May 2009
<http://www.clfp.com/energy/Ca%20Food%20Processing%20Industry.htm>. 11 The California Energy Commission. “California's Food Processing Industry Energy Efficiency Initiative:
Adoption of Industrial Best Practices.” Staff Report. Mar 2008. <http://www.energy.ca.gov/2008publications/CEC-400-2008-006/CEC-400-2008-006.PDF>.
12 Liss, Gary. “GrassRoots Recycling Network.” Accessed 5 May 2009
<http://www.grrn.org/zerowaste/business/>. 13 Gunther, Marc. “The end of garbage.” Fortune 19 Mar 2007. 14 Connett, Paul, and Bill Sheehan. A citizen's guide to zero Waste - A United States / Canadian Perspective. 2001. 15 Platt, Brenda et al. Stop Trashing the Climate. Institute for Local Self-Reliance, 2008. 16 Hall, Eleanor. Garbage (Our Endangered Planet series). Lucent Books. 17 Salhofer, Stefan et al. “Potentials for the prevention of municipal solid waste.” Waste Management 28.2 (2008):
245-259. 18 Woodard, Frank. Industrial Waste Treatment Handbook. Second. Butterworth Heinemann, 2006. 19. Amminudin, K.A., M.N. Sofian, and H. Hawari. “Consider water reuse options for your facility.”
Hydrocarbon Processing. 2008. 20 Giudice, Fabio, Guido La Rosa, and Antonino Risitano. Product Design for the Environment: A Life Cycle
Approach. 1st ed. CRC, 2006.
Zero Waste Strategies for Gills Onions: Sustainable Innovation and Waste Management 32
21 Executive Order 13101 Section 208. 1998. <http://www.ofee.gov/eo/13101.asp>. 22 US EPA. “Wastes - Resource Conservation - Reduce, Reuse, Recycle.” Accessed 2 Apr 2009
<http://www.epa.gov/osw/conserve/rrr/recycle.htm>. 23 Davis, G, and J H Song. “Biodegradable packaging based on raw materials from crops and their impact on
waste management.” Industrial crops and products 23.2 (2006): 147. 24 Rudnik, Ewa. Compostable polymer materials. 2008. 25 Lyon, Thomas P., and John W. Maxwell. Corporate Environmentalism and Public Policy. 2004. 26 MacKenzie, Dorothy. “You can still shop to save the world.” New Statesman 129.4468 (2000): 12. 27 Gunther, Marc. “Walmart Trashes Garbage.” Fortune 11 Jan 2007. 28 Ebsen, and Peter Neergaard. “Caveat emptor - Let the buyer beware! Environmental labeling and the
Limitations of 'Green' Consumerism.” Business Strategy and the Environment 15.1 (2006): 15-29.
29 Steve Gill, Gills Onions Facility, 24 Apr, 2009, site visit.
30 US EPA. Pollution Prevention (P2). Pollution Prevention Act of 1990, United States Code Title
42, the Public Health and Welfare Chapter 133. Accessed 25 Apr, 2009.
<www.epa.gov/oppt/p2home/pubs/p2policy/act1990.htm>
31 US EPA. “Green Chemistry.” Accessed 25 Apr 2009 <http://www.epa.gov/greenchemistry/>. 32 US EPA. “WasteWise Program”. Accessed 25 Apr, 2009.
<http://www.epa.gov/osw/partnerships/wastewise/about.htm>. 33 US EPA. “Resource Conservation Challenge (RCC) .” Accessed 10 May, 2009.
<http://www.epa.gov/waste/rcc/index.htm>. 34 Department for Environment, Food and Rural Affairs (Defra). “Defra, UK - Environmental Protection -
Recycling and Waste.” Accessed 28 Apr 2009 <http://www.defra.gov.uk/environment/waste/strategy/index.htm>.
35 European Chemical News. “Germany imposes 80-90% recycling target by 1995.” Dec 1990.
<http://www.recyclingpoint.com.sg/Articles/1990dec17-24-Germanyimposes80-90%25.htm>. 36 Diaz, L.F. et al. “Managing the organic fraction of municipal solid waste.” BioCycle 47.10 (2006): 50-52. 37 Stanbra, Ryan. “California Solid Waste Law, 1985-1989.” California Integrated Waste Management Board.
Accessed 25 Apr 2009 <http://www.ciwmb.ca.gov/Statutes/Legislation/CalHist/1985to1989.htm>. 38 California Integrated Waste Management Board. “About the California Integrated Waste Management
Board.” Accessed 25 Apr, 2009 <http://www.ciwmb.ca.gov/BoardInfo/>. 39 California Integrated Waste Management Board. “Zero Waste California .” Accessed 25 Apr 2009
<http://zerowaste.ca.gov/>. 40 Waste Board OKs $3 Million in Loans to California Companies: Program promotes higher uses for discarded materials,
creates jobs, bolsters recycled-product industry. 21 Apr 2009 <http://www.ciwmb.ca.gov/PressRoom/2009/04April/17.htm>.
Zero Waste Strategies for Gills Onions: Sustainable Innovation and Waste Management 33
41 California Product Stewardship Act of 2010 (AB 283). Updated Apr 12, 2009
<http://info.sen.ca.gov/pub/09-10/bill/asm/ab_0251-0300/ab_283_bill_20090212_introduced.html>.
42 California Integrated Waste Management Board. “Climate Change.” Accessed 10 May 2009
<http://www.ciwmb.ca.gov/climate/>. 43 “California Climate Action Registry Overview.” Accessed 28 Apr 2009
<http://www.climateregistry.org/about.html>. 44 “California Climate Action Registry - Taking Action on Climate Change.” Accessed 28 Apr 2009
<http://www.climateregistry.org/>. 45 California Global Warming Solutions Act of 2006 (AB 32). 2006. <http://www.leginfo.ca.gov/pub/05-
06/bill/asm/ab_0001-0050/ab_32_bill_20060927_chaptered.pdf>. 46 California Environmental Protection Agency, Air Resources Board. “AB 32 Climate Change Scoping
Document.” 28 Jan 2009 <http://www.arb.ca.gov/cc/scopingplan/document/scopingplandocument.htm>.
47 Montgomery, Douglas C. Introduction to Statistical Quality Control. 5th ed. Wiley, 2004. 48 Energy Information Administration. “California Electricity Profile.” 2007. Accessed 20 May 2009
<http://www.eia.doe.gov/cneaf/electricity/st_profiles/california.html>. 49 Owens, David K. “Electricity: 30 Years of Industry Change.” 7 Apr 2008.
<http://www.eia.doe.gov/conf_pdfs/Monday/owens.pdf>. 50 Dale, Larry et al. “The Interaction of Water and Energy in California: Climate Change and Price Impacts.”
12 Jun 2008. 51 The California Energy Commission. “Renewable Energy Research. Biomass - Anaerobic Digestion.”
Accessed 28 Apr 2009 <http://www.energy.ca.gov/research/renewable/biomass/anaerobic_digestion/index.html>.
52 Linstead, Conor, Caroline Gervais, and Paul Ekins. Mass Balance: An Essential Tool for Understanding Resource
Flows. London, UK: Royal Society for Nature Conservation, 2003. 53 Dowie, W A, D M McCartney, and J A Tamm. “A case study of an institutional solid waste environmental
management system.” Journal of Environmental Management 53.2 (1998): 137-146. 54 California Integrated Waste Management Board. “Solid Waste Characterization Data Collection Process.”
Accessed 23 Apr 2009 <http://www.ciwmb.ca.gov/wastechar/YourData.htm>. 55 US EPA. Life Cycle Assessment: Principles and Practice. 2006. 56 Duda, Mark, and Jane Shaw. “Life cycle assessment.” Society 35.1 (1997): 38-43. 57 Corti, Michelle et al. “Informing Packaging Design Desisions at Toyota MotorSales Using Life Cycle
Assessment.” Apr 2007. <http://www.bren.ucsb.edu/research/documents/ToyotaGPproposal.pdf>. 58 Ekvall, Tomas et al. “What life-cycle assessment does and does not do in assessments of waste
management.” Waste Management 27.8 (2007): 989-996. 59 Sarkis, Joseph. Greening the Supply Chain. 1st ed. Springer, 2006.
Zero Waste Strategies for Gills Onions: Sustainable Innovation and Waste Management 34
60 US EPA. The Lean and Green Supply Chain. 2000. 61 American Chemistry Council. “Plastics Division : commercial recycling.” Accessed 29 Apr 2009
<http://www.americanchemistry.com/plastics/doc.asp?CID=1583&DID=6003>. 62 Murphy, Pamela. The Garbage Primer: The League of Women Voters Education Fund. Lyons and Burford
Publishers, 1993. 63 US EPA. “Wastes - Resource Conservation - Common Wastes & Materials.” Accessed 29 Apr 2009
<http://www.epa.gov/wastes/conserve/materials/plastics.htm>. 64 Richtel, Matt, and Kate Galbraith. “Back at Junk Value, Recyclables Are Piling Up.” The New York Times 8
Dec 2008. 65 Marsh, Kenneth, and Betty Bugusu. “Food Packaging - Roles, Materials, and Environmental Issues.” Journal
of Food Science 72.3 (2007): R39-R55.
66 California Department of Public Health. “Industry Assistance - Need to Know Information for Safer Food Process.” 2008. <http://www.cdph.ca.gov/pubsforms/Documents/fdb%20etu%20Nd%20to%20Know%20Info.pdf>.
67 California Department of Public Health. “Industry Assistance - Need to Know Information for Safer Food Process.” 2008. <http://www.cdph.ca.gov/pubsforms/Documents/fdb%20etu%20Nd%20to%20Know%20Info.pdf>.