Zentech Jackup Rig Design R 550D
description
Transcript of Zentech Jackup Rig Design R 550D
7/21/2019 Zentech Jackup Rig Design R 550D
http://slidepdf.com/reader/full/zentech-jackup-rig-design-r-550d 1/8
R-550DJack-up Drilling Rig
400 Ft. Water Depth (121.9m)ABS Class Approved
7/21/2019 Zentech Jackup Rig Design R 550D
http://slidepdf.com/reader/full/zentech-jackup-rig-design-r-550d 2/8
R-550D
R-550D Jackup Drilling Rig
• High-capacity and extended-reach cantilever rig, rated for 3,500Kips combined drilling load (1,587mt) with extended reach to 80Ft. aft of transom (24.4m).
• Operational Variable Deck Load 11,000 Kips (4,989mt).
• 4,220 barrel active/reserve mud pits (671m3 ) congured for dualuid operations.
• Three mud pumps, each 2,220 HP TSC or equivalent (1,641 KW).
• Drill oor/cantilever, congured to o-line stand building with IronRoughnecks.
• Living Quarters for 150-plus, with up to 11 oce/conference/ training rooms; congured to suit client needs.
• Utilities and drains congured for Zero Discharge.
• Base design for closed loop or air cooling of all equipment.
• High-speed preload system for minimized mobilization time.
• Superior jacking capacity with 54 pinions allows jacking with fullpreload (70,000 Kips / 31,746 mt), in addition to normal jackingof 54,000 Kips (24,490 mt).
• Footprint compatible with MLT-116; KFELS Mod V-B; JU-2000A.
• Drilling depth 30,000 Ft.+ (9,144m+).
HULL
Hull Length 260 Ft. 79.2m
Hull Breadth 261 Ft. 79.6m
Hull Depth 27 Ft. 8.2m
Transit Draft 18 Ft. 5.48m
Transverse Leg Centers 142 Ft. 43.3m
Longitudinal Leg Centers 129 Ft. 39.3m
LEGS
Triangular, open truss X-braced Legs
3 Leg Conguration, Length 558.5 Ft. 170.2m
Spud Can Equivalent Diameter 54 Ft. 16.5m
Spud Can Maximum
Bottom Bearing Pressure
8.39 Kips/
Sq. Ft. 41.0mt/m 2
STORM SURVIVAL CRITERIA
Water Depth 400 Ft. 121.9m
Air Gap 50 Ft. 15.24m
Wave Height 60 Ft. 18.3m
Period 15 Sec. –
Surface Current 1.5 Knots 0.77 m/sec
Wind Velocity (1 Min.) 100 Knots 51 m/sec
Leg Penetration 25 Ft. 7.62m
JACKING AND FIXATION SYSTEMS
Jacking: TSC SJ1000 or equivalent
Fixation: Zenlock™ System (Patented)
2
7/21/2019 Zentech Jackup Rig Design R 550D
http://slidepdf.com/reader/full/zentech-jackup-rig-design-r-550d 3/8
R-550D
POWER PLANT
Main
Power
5 each
CatC175
2,586 bHP 1,929 KW each
Emergency
Power
1 each
Cat3512C1,478 bHP 1,103 KW
FULL ZERO DISCHARGE CAPABILITY
• Space for Cuttings Collection or Treatment
• Oil-Water Separator for Drains and Bilge
• All Drains Routable to Collection / Storage
• All Equipment with Closed Loop Cooling
STORAGE CAPACITIES
Fuel Oil 4,033 bbls 641m3
Potable Water 2,645 bbls 420m3
Drill Water 23,078 bbls 3,669m3
Preload 82,290 bbls 13,411m3
Active Mud Tanks 4,220 bbls 671m3
Mud Treatment
Tanks200 bbls 32m3
Brine 1,222 bbls 194m3
Base Oil 1,440 bbls 222m3
Bulk Barite/Cement 13,500 Cu. Ft. 382m3
Sack Storage 5,000 Sacks
Main Deck
Pipe Rack500 Kips 227mt
Cantilever
Pipe Rack1,200 Kips 544mt
DRILLING EQUIPMENT
Derrick40 Ft. by 45 Ft.
by 160 Ft. 12.2m by13.7m by 48.8m
Hookload 1,500 Kips 680mt
AC Top Drive, TDS-8 or Equiv. ≤2,000 Kips 907mt
AC Drawworks 4,600 HP 3,430 KW
Mud Pumps 3 each 2,200 HP 1,641 KW
Mud Standpipes 7,500 psi 517 bar
Rotary Table 49.5 in. 1.26m
Diverter KFDJFixed (bore) 36.5 in. 0.927m
Choke & Kill 15,000 psi 1,034 bar
KnuckleboomCantilever Crane >2ST at 68 Ft. >1.9mt at 21m
CLASSIFICATION, REGULATIONS
• As requested by Client: ABS MODU Code 2012
• “Rules for Building and Classing Oshore Mobile Drill-ing Units,” American Bureau of Shipping, 2012 Edition
• IMO, Modu Code 2009 Consolidated Edition
• International Convention of Loadlines, 1966
• International Convention of Tonnage Measurements,1969
• MARPOL, 2011 Consolidated Edition
• ILO 92 & ILO133; International Labour Conferenceconcerning Crew Accomodations on board Ship
• CAP 437
• ABS CDS 2012
ACCOMMODATIONS
Capacity to 150-Plus Persons
Single, Double staterooms and up to 11 Oce/
Conference/Training Rooms to suit Client needs
MUD TREATMENT
Dual Fluid Active system
2,400/1,500 GPM Solids Control System ( 9,085 / 5,678 lpm)
Shaker House Located at Starboard Stern
Permanent Flow Line
Space and Utilities for Centrifuges
Space and Utilities for Cuttings Equipment
Bulk Tank Dust Collection System
Bulk Transfer/Mud Mixing Control System
CANTILEVER
Longitudinal 80 Ft. Clear Aft 24.4m
Transverse±20 Ft. Port /
Starboard± 6.1m
Combined Load
Capacity3,500 Kips 1,587mt
All Cantilever Utilities Routed in Permanent
Drag Chains
DECK CRANES
3 Pedestal Cranes
Port, Starboard
& Aft Cranes
120 Ft. Boom
Length 36.6m
Aft Crane Rating110 Kips at 50
Ft. Radius
50mt at
15.2m
Port & Starboard
Cranes Rating
154 Kips at 50
Ft Radius.
70mt at
15.2m Radius
HELIDECK
Helicopter S61N, S92 or MI-8
Dimensions 72.8 Ft. Octagon 22.2m
Deck type Aluminum
PRELOADING EQUIPMENT
2 Preload Pumps 4,500 gpm 17,034 lpm
2 Sea Water /
Preload Pumps2,200 gpm 8,328 lpm
SERVICE TEMPERATURES
For Steel: Service
Temperature at-4º F -20º C
HVAC Ambient Range-4º F to
+122º F
-20º C to
+50º C
3
7/21/2019 Zentech Jackup Rig Design R 550D
http://slidepdf.com/reader/full/zentech-jackup-rig-design-r-550d 4/8
R-550D
Top Plan View
4
Zenlock disengaged
Zenlock disengaged
Zenlock engaged
Zenlock engaged
ZENLOCKTM System
Zentech’s patented ZENLOCKTM System provides
unparalleled rig safety and ease of operation. Thisunique leg-to-hull xation system has been designed,perfected and patented by Zentech engineers and is
already under construction for the R-550D rigs beingbuilt for Alliance Offshore Drilling.
7/21/2019 Zentech Jackup Rig Design R 550D
http://slidepdf.com/reader/full/zentech-jackup-rig-design-r-550d 5/8
R-550D
Machinery DeckArrangement
Hull 3D Cutaway
5
Engine Room
Mud Pump Room
F o r w a r d
F o r w
a r d
7/21/2019 Zentech Jackup Rig Design R 550D
http://slidepdf.com/reader/full/zentech-jackup-rig-design-r-550d 6/8
R-550D
Main Deck 2nd Level
6
Level 1-Man Rooms 2-Man Roomss Number of Men
1st Level (Main Deck) 0 0 0
2nd Level 0 31 62
3rd Level 0 24 48
4th Level 12 14 40
Helideck & Quarters Roof 0 0 0
Total 12 Rooms 69 Rooms 150 Men
7/21/2019 Zentech Jackup Rig Design R 550D
http://slidepdf.com/reader/full/zentech-jackup-rig-design-r-550d 7/8
R-550D
4th Level
Quarters,Roof & Helideck
3rd Level
7
7/21/2019 Zentech Jackup Rig Design R 550D
http://slidepdf.com/reader/full/zentech-jackup-rig-design-r-550d 8/8
Note: Specications, dimensions & capacities are nominal and subject to change without notice. © Zentech, Inc. 2014 R-550D 29 April 2014
R-550D
14800 St. Mary’s Lane, Suite 270
Houston, Texas 77079
E-mail: [email protected] www.zentech-usa.com
Tel: +1 281 558 0290
Fax: +1 281 558 0295