Z STARGAZER LED Downlight/External Truck Combo Z Spec Sheets/SG-EHNR.pdf · 2019-10-17 · WARNIN...
3
STARGAZER LED Downlight/External Truck Combo DO NOT RUN LINE VOLTAGE INSIDE YOUR FLAGPOLE! IT CREATES AN ELECTRICAL HAZARD. POWER SUPPLIES/DRIVERS MUST BE INSTALLED OUTSIDE OF THE FLAGPOLE, AND MUST REMAIN IN THE PROVIDED ENCLOSURE BOX. MUST INSTALLED BY A LICENSED ELECTRICIAN. DO NOT BURY ABOVE-GROUND DRIVER Power Supply Options SPECIFICALLY DESIGNED FOR ydZE> HALYARD FLAGPOLES UP TO 60’ Capable of illuminating a 10' x 15' flag while fully unfurled and proudly waving at the top of your flagpole. The STARGAZER builds on all the unique features of the first generation model, and takes flagpole downlighting to the limits of the newest LED technology. The STARGAZER efficiently illuminates Old Glory due to both the curvature of the dome and unique triangulation method of LED placement. 9" 8.5" Eagle Mountain Flag 333 FM 2325 Wimberley, TX 78676 512-847-0010 emflag.com 3-Year Limited Warranty Maintenance & Repairs a Dusk-to-Dawn Photocell Less 50,000 Lamp Hours when used with 150'. and can be remotely located up to 3STARGAZERs on the same circuit Power Supply powers up to (available in 4 colors) In-Ground/Burial, and Faux Rock includeAbove-Ground, Power Supply Options 150'options. low voltage cord. Available in 100' & Standard with 60' factory installed CRI: 90+ 723 Lumens Standard5.5 Watts 3000 Kelvin 24VDCSolarPower Capable of running off of Output: 24VDC Input: 120/277V pulley system. the need for a separateornament and LED Downlight/Truck Combo -eliminates Features & Specifications
Transcript of Z STARGAZER LED Downlight/External Truck Combo Z Spec Sheets/SG-EHNR.pdf · 2019-10-17 · WARNIN...
ZZZZSTARGAZER LED Downlight/External Truck Combo ZZZZZ
DO NOT RUN LINE VOLTAGE INSIDE YOUR FLAGPOLE!IT CREATES AN ELECTRICAL HAZARD. POWER SUPPLIES/DRIVERS MUST BE INSTALLED OUTSIDE OF THE FLAGPOLE, AND MUST REMAIN IN THE PROVIDED ENCLOSURE BOX. MUST INSTALLED BY A LICENSED ELECTRICIAN. DO NOT BURY ABOVE-GROUND DRIVER
Power Supply Options
SPECIFICALLY DESIGNED FOR HALYARD FLAGPOLES UP TO 60’
Capable of illuminating a 10' x 15' flag while fully unfurled and proudly waving at the top of your flagpole.The STARGAZER builds on all the unique features of the first generation model, and takes flagpole downlighting to the limits of the newest LED technology. The STARGAZER efficientlyilluminates Old Glory due to both the curvature of the dome and unique triangulation method of LED placement.
9"
8.5"
Eagle Mountain Flag 333 FM 2325 Wimberley, TX 78676 512-847-0010emflag.com
3-Year Limited WarrantyMaintenance & Repairsa Dusk-to-Dawn Photocell Less 50,000 Lamp Hours when used with 150'.and can be remotely located up to 3STARGAZERs on the same circuit Power Supply powers up to (available in 4 colors)In-Ground/Burial, and Faux Rock includeAbove-Ground, Power Supply Options 150'options.low voltage cord. Available in 100' & Standard with 60' factory installed CRI: 90+723 LumensStandard5.5 Watts3000 Kelvin24VDCSolarPowerCapable of running off of Output: 24VDCInput: 120/277V
pulley system.the need for a separate ornament and LED Downlight/Truck Combo - eliminates FFeatures & Specifications
STARGAZER Ordering Information
SG
SG
3K Standard
5K
Contact Customer Service for Pricing & Availability on models with a custom or special truck finish
SG-AG-DRIVER SG- -DRIVER
Cannot
not
C for Northern Latitudes
3
/ ; adjustable sensitivity
SG-ROCK-AUTUUMN SG-ROCK-FIELDSTONE
SG-ROCK-RIVERBED SG-ROCK-SANDSTONE
N/A = External RopeCB = Internal CableRP= Internal Rope
Design/Halyard -
Eagle Mountain Flag 333 FM 2325 Wimberley, TX 78676 512-847-0010emflag.com
PHOTOCELL=
SG-SOLAR-NL=SG-SOLAR-SL= C for Southern Latitudes
WARNING: Always install xtures according to Na onal Electrical Code (NEC) and local codes. Failure to do so will void the warranty and could cause damage to the xture or may result in personal injury.
CAUTION: DO NOT WIRE LED DOME DOWNLIGHT DIRECTLY TO 120V.
PURPLE OR BLUE( - )
ANSFORMERR/TRDRIVE
POWERSOURCE
RED ( + )
INSIDE the NEMA 3Renclosure box.
120V/277V
WHITE (NUETRAL)
BLACK (HOT )
GROUND
1. VERY IMPORTANT: TURN OFF ELECTRICITY AT THECIRCUIT BREAKER BEFORE INSTALLING FIXTURE.
the transformer/driver enclosure box. The maximum distance
Loosen the four Phillips screws on the sides of the power supply3.to remove the cover of the enclosure box.
screws.5. DO NOT CONNECT THE POWER WIRES TO THE PANEL AT THIS
TIME. Ground the power supply housing in accordance with localelectrical code.
secondary wires from LED transformer/driver using wire
the purple/blue ( - ) wires. MAKE SURE TO OBSERVE POLARITY
AND NEGATIVE TO NEGATIVE.]
of the enclosure box, connect the BLACK lead of transformer tothe 24VDC line HOT source and the white lead of transformerto the 24VDC NEUTRAL source.
box using wire nuts (not provided).
NOTE: FIXTURE MUST BE INSTALLED BY A LICENSED ELECTRICIAN. THESEINSTRUCTIONS DO NOT COVER ALL DETAILS OR VARIATIONS IN EQUIPMENT, NOR DO THEY PROVIDE FOR EVERY UNCERTAINTY RELATED TO INSTALLATION, OPERATION, MAINTAINCE, OR MOUNTING CONTINGENCY. SHOULD SPECIFIC PROBLEMS OCCUR THAT ARE NOT COVERED IN THE INSTRUCTIONS, CONTACTEAGLE MOUNTAIN FOR ADDITIONAL PRODUCT INFORMATION AND SUPPORT.
IMPROPER INSTALLATION AND/OR UTILIZATION MAY VOID MANUFACTURER’S WARRANTY.
NOTE: THIS FIXTURE CONTAINS ELECTRONICCOMPONENTS THAT CAN BE SENSITIVE TO VOLTAGE SURGES AND LIGHTNING. WE RECOMMEND AN ELECTRICIAN INSTALL SURGE SUPPRESSION AT THE SERVICE PANEL.
ELECTRICIANS WIRING GUIDE - 120V/277V
Eagle Mountain Flag 333 FM 2325 Wimberley, TX 78676 512-847-0010emflag.com
