Yrs - diamond-india.com
Transcript of Yrs - diamond-india.com
SUCCESS
When TIDC India was started, we were a dedicated facility for manufacturing bicycle chains, for our parent company Tl cycles.
Today, TIDC manufactures a spectrum of chain products and in volumes that few manufacturers worldwide can match from drive chains, motorcycle chains, timing chains to custom made industrial chains, conveyor chains and agricultural chains.
Step by step, link by link we've developed momentum. Decades of experience have lent us invaluable insights in R&D. Expansion of facilities have led to our acquiring formidable manufacturing strengths. And continuous investments in technology have ensured we have world class technology on call. All of which has brought results in the form of thousands of happy end-users, customers and clients.
Today, TIDC is truly the complete chain company with the ability to meet any chain requirement, anywhere in the world.
The TIDC journey
1996Fine blanking operations commenced to market Chain-Sprocket as a system.
1980Developed Motorcycle chain in-house for Japanese two-wheelers.
1960 TIDC Established for manufacture of bicycle chains.
2001Held first Overseas Distributor Meet at Hanover, Germany. Obtained IS014001 certification for Environmental Management.
1985 Developed Engineering Class Conveyor Chains
1961 Technical Collaboration with Diamond Chain Company,
2002 Obtained ISO 9001 : 2000 certification for Quality System
1998Obtained QS -9000 for Timing Chain Division. Obtained Golden Peacock National Quality Award from Institute of Directors.
1991Entered into Exports Market. Launched company-wide TQM program.
1969 Diversified into Industrial Roller Chains
2015
2019
2003
2010
2012/13
Obtained ISO/TS 16949 certification for Cam chain and Fine blanking division
Acquired SEDIS
Enhanced capacity by 20% across plants
Inducted the Delta Technology for Higher Wear Resistance
1999Entered into a technology collaboration with Tsubaki, Japan Obtained CII-EXIM commendation for strong commitment to Quality
1995100% export Oriented Unit set up for agriculture chain. Relocated timing chain facility as a separate division.
1975 Diversified into Heavy-duty chains & oil field chains.
Timeline analysisHeld channel partner meet & launched adjacent products like Cutter Blades & Anchor Bolts
We rely on extensive R&D exercises, to provide the insights that keep our products in step with the market.
We believe in a collaborative approach to new product development, to provide value and reduce delivery time.
We depend on the latest in design software and chain manufacturing technology.
We count on over 2, 75,000 sq.ft. of factory space, to roll out our products in sufficient numbers and in keeping with stringent quality control.
We trust in a widespread sales network, to reach these products to clients all over India. And that’s why, our clients rely on us.
4
TIDC EDGE
DESIGN & ENGINEERINGThe Engineering success of TIDC has always been a combination of the latest technology deployed and continuous innovations in
existing products.
Greater Fatigue and Tensile StrengthThe plates in each and every TIDC chain undergo piercing operation
to extremely accurate specifications. Followed by Shaving or Drifting
to increase bearing area, guaranteeing greater dynamic strength and
fatigue life.
Longer Wear LifeRoundness of the bushes and heat treatment of pins and bushes
also impact wear life. At TIDC bushes are manufactured on a
multislide auto forming machine which produces them to uniform
roundness. Edge beveling and meticulous sizing is also carried out
for the bushes. A special purpose machine ensures perfect cropping
of pins. All components are treated in a controlled atmosphere for
outstanding endurance.
Maximum Working Load CapabilityCritical applications call for chains with a high working load
capability, and for this plates, bushes and rollers are shot peened -
constantly bombarded with hard metal pellets at high speeds.
5
TIDC EDGE
Maximum Impact & Crushing StrengthHigh impact resistance of rollers is achieved by use of solid rollers
which are cold extruded from wires. This enables the production of
strong rollers with uniform wall thickness and excellent finish.
Assembly & Testing Prelubrication is followed by precision assembly and proof loading.
Rigorous testing is done under various loads and speeds to evaluate
their performance and to compare them against Indian and
international standards.
Quality & PerformanceStrict and complete adherence to constant quality and regular
technology upgradation have ensure TIDC chains exceed all laid
down parameters:
• Consistency in length control
• Higher than standard breaking loads
• Higher than standard fatigue limits
From TIDC INDIA
THE COMPLETE CHAIN COMPANYDiamond chains are designed and manufactured by TIDC India, a part of the US $ 5.2 billion Murugappa Group, one of the most
trusted and respected business Groups in India. A Group that is renowned for its belief in ethical business practices, innovative
processes and people development.
TIDC India was started in 1960, to manufacture bicycle chains and the following decades were witness to our unprecedented
growth and expansion. Step by step, we've included over 2000 varieties of chains in our range. From tiller chains, leaf chains and
conveyor chains to industrial power drive chains, motorcycle drive chains and engine mechanism chains, our production has
grown to a gigantic 25 million metres annually.
And today, we possess the capability to meet any requirement in chains, anywhere in the world.
Success can be spelt with two letters. R&DAt TIDC, we owe our success to listening. Paying attention to our customers, and innovating with products that suit their needs
better. Every choice with regard to size, material or method is in direct response to the needs of application engineers in the
industries we serve.
TIDC engineers use Auto CAD, Solid works and Finite Element Analysis for cutting edge solutions in the design of the chains, and
the manufacturing technology process is plotted out with equal care. The resulting products are comprehensively tested at our test
labs, before they eventually find their wayto a Diamond customer.
In collaboration with all our clientsA unique and rewarding system we follow at TIDC is
what we call Collaborative Processes. Whereby our
clients are actively involved in the making of custom
built products. Today, 40% of our product sales are
from customisations for special applications, and
collaborative processes are the basis for our proven
track record and quick deliveries achieved in this area.
6
A manufacturer with rare strengthsOver the years we have developed and fine-tuned immense
competencies in cold working of metals, metal joining
processes, metal treatment processes and development of
tools, jigs and fixtures to support manufacturing technology.
Our chains get the best treatmentOur team has rich experience in heat treatment to maximise strength and life in every chain element: pins, bushing, rollers and link
plates.
We deploy our specialist skills in continuous hardening
operations for martensitic heat treatment. Under a completely
automated atmosphere we work with high, medium and low
carbon steels, alloy steels, austenitic and martensitic stainless
steels etc. Some of the other treatments we offer based on
customer specifications are:-
• Chain colouration - Ash, Straw, Blue, Blue Black, Brown etc.
for aesthetic appeal, achieved through controlled atmosphere.
• Plates, rollers are shot peened after heat treatment thereby
enhancing fatigue life. Based on application requirements we
offer chromised pins that increase wear-life
7
From TIDC INDIA
From TIDC INDIA
The best certifications are those that come from our clients
We are one of the world's few companies to be certified for API 7F specifications by the American Petroleum Institute for oil field
chains.
Our manufacturing processes right from product design to testing of finished chains conform to ISO 9001:2015 standards and are
certified by RWTUV of Germany. Our Motorcycle Engine Mechanism Chain and Fine Blanking Divisions are certified to
IATF 16949:2016 standards by Underwriters Laboratories, USA.
But what gives us the most pride is, the approval and repeat orders that come to us from our clients all over India & across the
world.
Quality, That Binds Everything
Total Quality Management (TQM) is the governing principle at TIDC INDIA and we have our own quality management system that
conforms to the International Standards IATF 16949 and ISO 9001.
Our Quality system begins from Design of our product and
covers all process from Purchase and inspection of raw
materials, vendor management till packing and dispatch of
our chains.
Quality is nurtured as integral part of every process.
Pokayoke’s with latest technology updates implemented at all
possible locations to ensure quality products reach customer.
Our products are treated suitably to enhance reliability against
all conditions at given work environment.
8
From TIDC INDIA
STANDARD ROLLER CHAINS
EUROPEAN SERIES
DIAMOND MAX EUROPEAN SERIES
DIAMOND MAX AMERICAN SERIES
AMERICAN HEAVY SERIES
HI - LIFE AMERICAN SERIES
OTHER STANDARDS
STRAIGHT SIDE PLATE CHAINS - EUROPEAN SERIES
STRAIGHT SIDE PLATE CHAINS - AMERICAN SERIES
DOUBLE PITCH DRIVE CHAINS - AMERICAN & EUROPEAN SERIES
DOUBLE PITCH CONVEYOR CHAINS - AMERICAN SERIES
ATTACHMENT CHAINS
SHORT PITCH K1 ATTACHMENTS
SHORT PITCH K2 ATTACHMENTS
SHORT PITCH MI ATTACHMENTS
SHORT PITCH M2 ATTACHMENTS
DOUBLE PITCH K1 ATTACHMENTS
DOUBLE PITCH K2 ATTACHMENTS
WORK STANDARD ATTACHMENTS
EXTENDED PIN CHAINS
SHORT PITCH CHAINS
DOUBLE PITCH CHAINS - AMERICAN & EUROPEAN SERIES
STRAIGHT SIDE PLATE AMERICAN SERIES
WORK STANDARD EXTENDED PIN CHAINS
HOLLOW PIN CHAINS
TYPE 1 (WITH ROLLER, WITHOUT BUSH)
TYPE 2 (WITH ROLLER AND BUSH)
TYPE 3 (WITH BUSH, WITHOUT ROLLER)
TYPE 4 (DOUBLE PITCH HOLLOW PIN CHAINS)
TYPE 5 (WITH CARRIER ROLLERS)
ACCUMULATOR CHAINS
TYPE 1 & TYPE 2
TOP ROLLER CHAINS
SIDE ROLLER CHAINS
DOUBLE PLUS CHAINS & ACCESSORIES
PLASTIC TOP CHAINS
POLY STEEL CHAINS
SHARP TOP CHAINS
12
17
19
22
25
26
27
29
30
31
33
35
36
38
39
40
41
42
43
44
45
46
46
47
47
48
49
51
51
52
57
57
58
From TIDC INDIA
RUBBER TOP CHAINS
SELF LUBE CHAINS
PLASTIC SLEEVE CHAINS
SINTERED BUSH CHAINS
‘0’ RING CHAINS
DIAMOND DELTA
OIL FIELD CHAINS
WORK STANDARD SPECIAL CHAINS
CORROSION RESISTANT CHAINS
STAINLESS STEEL CHAIN EUROPEAN SERIES
STAINLESS STEEL CHAIN AMERICAN SERIES
STAINLESS STEEL CHAIN DOUBLE PITCH EUROPEAN SERIES
STAINLESS STEEL CHAIN DOUBLE PITCH AMERICAN SERIES (DRIVE)
STAINLESS STEEL CHAINS DOUBLE PITCH AMERICAN SERIES (CONVEYOR)
COATED CHAINS
PLATED CHAINS EUROPEAN SERIES
PLATED CHAINS AMERICAN SERIES
LEAF CHAINS
BL SERIES
DIAMOND MAX BL SERIES
AL SERIES
LL SERIES
DIAMOND WORK STANDARD SERIES
CONVEYOR CHAINS
EUROPEAN SERIES - SOLID PIN CHAINS
EUROPEAN SERIES - HOLLOW PIN CHAINS
METRIC SERIES (ISO) - SOLID PIN CHAINS
METRIC SERIES (ISO) - HOLLOW PIN CHAINS
WORK STANDARD ENGINEERING CLASS CHAINS
TEXTILE CHAINS
FLAT CARD CHAINS
TECHNICAL DATA
SELECTION OF ROLLER CHAIN DRIVES
INSTALLATION AND MAINTENANCE OF CHAIN DRIVES
LUBRICATION OF CHAIN DRIVES
TROUBLE SHOOTING HINTS
HORSEPOWER RATING CHART
WARNING
59
62
63
65
66
67
70
72
73
74
74
75
76
77
78
80
83
84
86
88
91
93
94
96
97
99
102
105
106
107
108
110
STANDARD ROLLER CHAINS
Single Strand
The European series of roller chains are designed for use in mechanical power transmission systems.
Note : Spares E & F are available for all models
*Straight Side Plates
ISO 606/BS 228/DIN 8187
EUROPEAN SERIES
04B-1
05B-1
06B-1
08B-1
10B-1
12B-1
16B-1
20B-1
24B-1
28B-1
32B-1
40B-1
48B-1
D04B 01
D05B 01
D061 01
D083 01
D101 01
D120 01
D160 01
D200 01
D240 01
D280 01
D320 01
D400 01
D480 01
6.00
8.00
9.525
12.70
15.875
19.05
25.40
31.75
38.10
44.45
50.80
63.50
76.20
2.80
3.00
5.72
7.75
9.65
11.68
17.02
19.56
25.40
30.99
30.99
38.10
45.72
4.00
5.00
6.35
8.51
10.16
12.07
15.88
19.05
25.40
27.94
29.21
39.37
48.26
1.85
2.31
3.28
4.45
5.08
5.72
8.28
10.19
14.63
15.90
17.81
22.89
29.24
5.00
7.11
8.26
11.81
14.73
16.10
21.08
26.40
33.40
37.08
42.28
52.96
63.88
7.40
8.60
13.50
17.00
19.60
22.70
36.10
43.20
53.40
65.10
67.40
82.60
99.10
10.30
11.70
16.80
20.90
23.70
27.30
41.50
49.30
60.00
72.50
75.30
92.80
109.60
0.08
0.11
0.28
0.50
0.67
0.88
2.07
2.91
5.49
7.26
8.05
12.61
20.40
0.12
0.18
0.40
0.68
0.91
1.12
2.59
3.60
6.85
8.56
9.49
15.53
24.45
300
510
910
1840
2290
2960
6120
9690
16310
20390
25500
36190
57090
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
B,C,D
B,C,D
B,C,D
B,C,D
B,C,D
Int.Ref. No.
DIAMONDChain No.
Pitch(P)
WidthBetween
Inner Plates (W)
(Min)
RollerPin Dia
(D)(Max)
BearingPin Dia
(d)(Max)
PlateHeight
(H)(Max)
WidthOver
BearingPin(A)
(Max)
WidthOverJoint
Fasteners(B)
(Max)
ProjectedBearing
AreaSq.cm
Avg.Weight
perMeter(Kg)
TensileStrength
(Kgf)(Min)
SparesAvailability
12
STANDARD ROLLER CHAINS
Double Strand
Note : Spares E & F are available for all models
*Straight Side Plates
ISO 606/BS 228/DIN 8187
EUROPEAN SERIES
05B-2
06B-2*
08B-2
10B-2
12B-2
16B-2
20B-2
24B-2
28B-2
32B-2
40B-2
48B-2
D05B 02
D061 02
D083 02
D101 02
D120 02
D160 02
D200 02
D240 02
D280 02
D320 02
D400 02
D480 02
8.00
9.525
12.70
15.875
19.05
25.40
31.75
38.10
44.45
50.80
63.50
76.20
3.00
5.72
7.75
9.65
11.68
17.02
19.56
25.40
30.99
30.99
38.10
45.72
5.00
6.35
8.51
10.16
12.07
15.88
19.05
25.40
27.94
29.21
39.37
48.26
2.31
3.28
4.45
5.08
5.72
8.28
10.19
14.63
15.90
17.81
22.89
29.24
7.11
8.26
11.81
14.73
16.13
21.08
26.42
33.40
37.08
42.29
52.96
63.88
14.30
23.80
31.00
36.20
42.20
68.00
79.70
101.80
124.70
126.00
154.90
196.40
17.40
27.10
34.90
40.30
46.80
73.40
85.80
108.40
132.10
133.90
165.10
200.90
0.22
0.56
1.00
1.34
1.76
4.14
5.82
10.98
14.52
16.10
25.23
40.81
5.64
10.24
13.92
16.59
19.46
31.88
36.45
48.36
59.56
58.55
72.29
91.21
0.32
0.76
1.31
1.79
2.22
5.03
7.33
13.50
16.96
18.74
30.72
48.54
795
1724
3270
4540
5900
11600
17330
28550
36700
45880
64220
101940
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
B,C,D
B,C,D
B,C,D
B,C,D
B,C,D
Int.Ref. No.
DIAMONDChain No.
Pitch(P)
WidthBetween
Inner Plates (W)(Min)
RollerPin Dia
(D)(Max)
BearingPin Dia
(d)(Max)
PlateHeight
(H)(Max)
WidthOver
BearingPin (A)
(Max)
WidthOverJoint
Fasteners(B)
(Max)
TransversePitch
ProjectedBearing
AreaSq.cm
Avg.Weight
perMeter(Kg)
TensileStrength
(Kgf)(Min)
SparesAvailability
13
STANDARD ROLLER CHAINS
Triple Strand
EUROPEAN SERIES
Note : Spares E & F are available for all models
*Straight Side Plates
ISO 606/BS 228/DIN 8187
05B-3
06B-3
08B-3
10B-3
12B-3
16B-3
20B-3
24B-3
28B-3
32B-3
40B-3
48B-3
D05B 03
D061 03
D083 03
D101 03
D120 03
D160 03
D200 03
D240 03
D280 03
D320 03
D400 03
D480 03
8.00
9.525
12.70
15.875
19.05
25.40
31.75
38.10
44.45
50.80
63.50
76.20
3.00
5.72
7.75
9.65
11.68
17.02
19.56
25.40
30.99
30.99
38.10
45.72
5.00
6.35
8.51
10.16
12.07
15.88
19.05
25.40
27.94
29.21
39.37
48.26
2.31
3.28
4.45
5.08
5.72
8.28
10.19
14.63
15.90
17.81
22.89
29.24
7.11
8.26
11.81
14.73
16.13
21.08
26.42
33.40
37.08
42.29
52.96
63.88
19.90
34.00
44.90
52.80
61.70
99.90
116.10
150.20
184.30
184.50
227.20
281.60
23.00
37.30
48.80
56.90
66.30
105.30
122.20
156.80
191.70
192.40
237.40
292.10
0.33
0.84
1.50
2.01
2.64
6.21
8.73
16.47
21.78
24.15
37.85
61.22
5.64
10.24
13.92
16.59
19.46
31.88
36.45
48.36
59.56
58.55
72.29
91.21
0.50
1.12
1.94
2.68
3.32
7.65
10.96
20.20
25.38
28.04
45.97
72.67
1130.00
2540.00
4850.00
6810.00
8850.00
17400.00
25490.00
43330.00
54030.00
68300.00
96840.00
152910.00
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
B,C,D
B,C,D
B,C,D
B,C,D
B,C,D
Int.Ref. No.
DIAMONDChain No.
Pitch(P)
WidthBetween
Inner Plates(W)
(Min)
RollerPin Dia
(D)(Max)
BearingPin Dia
(d)(Max)
PlateHeight
(H)(Max)
WidthOver
BearingPin (A)
(Max)
WidthOverJoint
Fasteners(B)
(Max)
TransversePitch
ProjectedBearing
AreaSq.cm
Avg.Weight
perMeter(Kg)
TensileStrength
(Kgf)(Min)
SparesAvailability
14
ROLLER CHAINS
The Diamond Max SeriesThis special series of hi-life, special characteristic chains has been created for rugged applications, where the standard chains have always fallen short. They feature unique properties such as high breaking load, increased fatigue strength & wear life, close length tolerance and more.
Diamond Max Roller Chains have been specifically developed with exceptional strength and endurance. They get their extra endurance from the inspiration in the detail of the plates, pins, bushes and rollers, manufacture to close tolerance, and assembly with care.
15
REGULAR CONTOUR NEW CONTOUR
SHOT PEENED PLATES HIGH PERFORMANCE CHAINS
SHOT PEENING
Fatigue life is enhanced by shot peeningand pre-stressing processes
16
STANDARD ROLLER CHAINS
Single Strand
Note : Spares E & F are available for all models
DIAMOND MAX EUROPEAN SERIES
08B-1
10B-1
12B-1
16B-1
20B-1
Q083 01
Q101 01
Q120 01
Q160 01
Q200 01
12.70
15.875
19.05
25.40
31.75
7.75
9.65
11.68
17.02
19.56
8.51
10.56
12.07
15.88
19.05
11.81
14.73
16.13
21.08
26.42
4.45
5.08
5.72
8.27
10.19
17.00
19.60
22.70
36.10
43.20
20.90
23.70
27.30
41.50
49.30
0.50
0.67
0.88
2.07
2.91
0.74
0.98
1.20
2.87
3.85
2120
2828
3400
7500
11300
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
Int.Ref. No.
DIAMONDChain No.
Pitch(P)
WidthBetween
Inner Plates (W)(Min)
RollerDia(D)
(Max)
PlateHeight
(H)(Max)
BearingPin Dia
(d)(Max)
WidthOver
BearingPin (A)
(Max)
WidthOverJoint
Fasteners(B)
(Max)
ProjectedBearing
AreaSq.cm
Avg.Weight
perMeter(Kg)
DiamondMax
TensileStrength
(Kgf)(Min)
SparesAvailability
17
STANDARD ROLLER CHAINS
Double Strand
Triple Strand
Note : Spares E & F are available for all models
08B-2
10B-2
12B-2
16B-2
20B-2
Q083 02
Q101 02
Q120 02
Q160 02
Q200 02
12.70
15.88
19.05
25.40
31.75
7.75
9.65
11.68
17.02
19.56
8.51
10.56
12.07
15.88
19.05
11.81
14.73
16.13
21.08
26.42
4.45
5.08
5.72
8.27
10.19
31.00
36.20
42.20
68.00
79.70
34.90
40.30
46.80
73.40
85.80
13.92
16.59
19.46
31.88
36.45
1.43
1.93
2.38
5.57
7.84
3800
5300
6800
15000
20400
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
TransversePitch(P1)
Int.Ref.No.
DIAMONDChain No.
Pitch(P)
WidthBetween
Inner Plates(W)
(Min)
RollerDia(D)
(Max)
PlateHeight
(H)(Max)
BearingPin Dia
(d)(Max)
WidthOver
BearingPin (A)
(Max)
WidthOverJoint
Fasteners(B)
(Max)
Avg.Weight
perMeter(Kg)
DiamondMax
TensileStrength
(Kgf)(Min)
SparesAvailability
08B-3
10B-3
12B-3
16B-3
20B-3
Q083 03
Q101 03
Q120 03
Q160 03
Q200 03
12.70
15.88
19.05
25.40
31.75
7.75
9.65
11.68
17.02
19.56
8.51
10.56
12.07
15.88
19.05
11.81
14.73
16.13
21.08
26.42
4.45
5.08
5.72
8.27
10.19
44.90
52.80
61.70
99.90
116.10
48.80
56.90
66.30
105.30
122.10
13.92
16.59
19.46
31.88
36.45
2.11
2.89
3.56
8.48
11.72
5590
8400
10200
22500
29700
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
TransversePitch(P1)
Int.Ref. No.
DIAMONDChain No.
Pitch(P)
WidthBetween
Inner Plates (W)(Min)
RollerDia(D)
(Max)
PlateHeight
(H)(Max)
BearingPin Dia
(d)(Max)
WidthOver
BearingPin (A)
(Max)
WidthOverJoint
Fasteners(B)
(Max)
Avg.Weight
perMeter(Kg)
DiamondMax
TensileStrength
(Kgf)(Min)
SparesAvailability
18
STANDARD ROLLER CHAINS
The American series of roller chains are designed for use in mechanical power transmission systems.
Single Strand
Note : Spares E & F are available for all models
*Bush Chain
ISO 606/ANSI B 29.1/DIN 8188
AMERICAN SERIES
25-1
35-1
40-1
41-1
50-1
60-1
80-1
100-1
120-1
140-1
160-1
180-1
200-1
240-1
B 04A 01
B 06A 01
D 08A 01
D 08D 01
D 102 01
D 121 01
D 161 01
D 201 01
D 241 01
D 281 01
D 321 01
D 361 01
D 401 01
D 481 01
6.35
9.525
12.70
12.70
15.875
19.05
25.40
31.75
38.10
44.45
50.80
57.15
63.50
76.20
3.10
4.68
7.85
6.25
9.40
12.58
15.75
18.90
25.25
25.23
31.55
35.49
37.85
47.35
3.30*
5.08*
7.92
7.77
10.16
11.91
15.88
19.05
22.23
25.40
28.58
35.71
39.68
47.68
2.31
3.60
3.98
3.60
5.09
5.96
7.94
9.54
11.11
12.71
14.29
17.46
19.85
23.81
6.03
9.04
12.06
9.55
15.08
18.09
24.10
30.16
36.20
42.20
48.20
54.31
60.30
72.30
5.25
7.81
10.40
8.26
13.00
15.90
20.80
26.00
31.20
36.20
41.60
46.86
52.00
62.40
0.75
1.25
1.50
1.25
2.00
2.40
3.20
4.00
4.70
5.56
6.30
7.14
7.90
9.60
0.75
1.25
1.50
1.25
2.00
2.40
3.20
4.00
4.70
5.56
6.30
7.14
7.90
9.60
9.10
13.20
17.80
15.00
21.80
26.80
34.00
41.20
51.50
55.60
66.60
73.90
80.30
97.90
11.60
16.10
21.20
18.40
25.60
31.00
39.10
47.10
58.30
63.30
74.50
83.30
90.50
109.80
0.11
0.27
0.44
0.33
0.71
1.04
1.77
2.59
3.90
4.67
6.38
9.38
10.75
15.90
0.13
0.34
0.63
0.43
1.04
1.52
2.58
3.85
5.61
7.64
9.61
13.23
16.26
23.63
360
798
1410
910
2200
3190
5670
9030
12950
17240
22680
28700
36070
53050
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
B,C,D
B,C,D
B,C,D
B,C,D
B,C,D
B,C,D
Int.Ref. No.
DIAMONDChain No.
Pitch(P)
WidthBetween
InnerPlates (W)(Min)
RollerDia(D)
(Max)
BearingPinDia(d)
(Max)
Plate Height
IP(H1)
(Max)
OP(H2)
(Max)
IP(T1)
OP(T2)
Plate Thickness WidthOver
BearingPin (A)
(Max)
WidthOverJoint
Fasteners(B)
(Max)
ProjectedBearing
AreaSq.cm
Avg.Weight
perMeter(Kg)
TensileStrength
(Kgf)(Min)
SparesAvailability
19
STANDARD ROLLER CHAINS
Double Strand
Note : Spares E & F are available for all models
*Bush Chain
ISO 606/ANSI B 29.1/DIN 8188
AMERICAN SERIES
35-2
40-2
50-2
60-2
80-2
100-2
120-2
140-2
160-2
180-2
200-2
240-2
B 06A 02
D 08A 02
D 102 02
D 121 02
D 161 02
D 201 02
D 241 02
D 281 02
D 321 02
D 361 02
D 401 02
D 481 02
9.525
12.70
15.875
19.05
25.40
31.75
38.10
44.45
50.80
57.15
63.50
76.20
4.68
7.85
9.40
12.58
15.75
18.90
25.22
25.22
31.55
35.48
37.85
47.35
5.08*
7.92
10.16
11.91
15.88
19.05
22.23
25.40
28.57
35.71
39.68
47.63
3.60
3.98
5.09
5.96
7.94
9.54
11.11
12.71
14.29
17.46
19.85
23.81
8.65
12.00
15.00
18.09
24.10
30.16
36.20
42.20
48.20
54.31
60.30
72.30
7.81
10.40
13.00
15.90
20.80
26.00
31.20
36.40
41.60
46.86
52.00
62.40
1.25
1.50
2.00
2.40
3.20
4.00
4.70
5.56
6.30
7.14
7.90
9.60
1.25
1.50
2.00
2.40
3.20
4.00
4.70
5.56
6.30
7.14
7.90
9.60
23.30
32.10
39.90
49.60
63.30
76.90
97.00
104.50
124.50
139.80
151.90
185.80
26.20
35.50
44.00
53.80
68.40
82.80
103.80
112.20
133.00
149.20
162.10
193.00
0.53
0.88
1.42
2.08
3.54
5.18
7.80
9.35
12.77
18.76
21.50
31.80
10.13
14.38
18.11
22.78
29.29
35.76
45.44
48.87
58.55
65.84
71.55
87.83
0.67
1.26
2.05
3.01
5.13
7.64
11.13
14.37
19.68
26.46
32.83
46.72
1600
2820
4440
6360
11340
18060
25900
35160
46240
57100
72140
106100
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
B,C,D
B,C,D
B,C,D
B,C,D
B,C,D
B,C,D
Int.Ref. No.
DIAMONDChain No.
Pitch(P)
WidthBetween
InnerPlates (W)(Min)
RollerDia(D)
(Max)
BearingPinDia(d)
(Max)
Plate Height
IP(H1)
(Max)
OP(H2)
(Max)
IP(T1)
OP(T2)
Plate Thickness WidthOver
BearingPin (A)
(Max)
WidthOverJoint
Fasteners(B)
(Max)
TransversePitch(P1)
ProjectedBearing
AreaSq.cm
Avg.Weight
perMeter(Kg)
TensileStrength
(Kgf)(Min)
SparesAvailability
20
STANDARD ROLLER CHAINS
Triple Strand
Note : Spares E & F are available for all models
*Bush Chain
ISO 606/ANSI B 29.1/DIN 8188
AMERICAN SERIES
35-3
40-3
50-3
60-3
80-3
100-3
120-3
140-3
160-3
180-3
200-3
240-3
B 06A 03
D 08A 03
D 103 03
D 121 03
D 161 03
D 201 03
D 241 03
D 281 03
D 321 03
D 361 03
D 401 03
D 481 03
9.525
12.70
15.875
19.05
25.40
31.75
38.10
44.45
50.80
57.15
63.50
76.20
4.68
7.85
9.40
12.58
15.75
18.90
25.22
25.22
31.55
35.48
37.85
47.35
5.08*
7.92
10.16
11.91
15.88
19.05
22.23
25.40
28.57
35.71
39.68
47.63
3.60
3.98
5.09
5.96
7.94
9.54
11.11
12.71
14.29
17.46
19.85
23.81
8.65
12.00
15.00
18.09
24.10
30.16
36.20
42.20
48.20
54.31
60.30
72.30
7.81
10.40
13.00
15.90
20.80
26.00
31.20
36.40
41.60
46.86
52.00
62.40
1.25
1.50
2.00
2.40
3.20
4.00
4.70
5.56
6.30
7.14
7.90
9.60
1.25
1.50
2.00
2.40
3.20
4.00
4.70
5.56
6.30
7.14
7.90
9.60
33.40
46.50
58.00
72.40
92.60
112.70
142.40
153.40
183.10
205.60
223.40
273.60
36.30
49.90
61.80
76.60
97.70
118.60
149.20
161.10
191.60
215.00
233.60
285.50
0.80
1.32
2.13
3.12
5.31
7.77
11.70
14.03
19.16
28.14
32.26
47.71
10.13
14.38
18.11
22.78
29.29
35.76
45.44
48.87
58.55
65.84
71.55
87.83
0.99
1.98
3.06
4.05
7.67
11.43
16.67
21.51
29.45
39.66
48.28
69.77
2394
4320
6660
9540
17010
27090
38850
52740
69360
85700
108210
159150
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
B,C,D
B,C,D
B,C,D
B,C,D
B,C,D
B,C,D
Int.Ref. No.
DIAMONDChain No.
Pitch(P)
WidthBetween
InnerPlates (W)(Min)
RollerDia(D)
(Max)
BearingPinDia(d)
(Max)
Plate Height
IP(H1)
(Max)
OP(H2)
(Max)
IP(T1)
OP(T2)
Plate Thickness WidthOver
BearingPin (A)
(Max)
WidthOverJoint
Fasteners(B)
(Max)
TransversePitch(P1)
ProjectedBearing
AreaSq.cm
Avg.Weight
perMeter(Kg)
TensileStrength
(Kgf)(Min)
SparesAvailability
21
STANDARD ROLLER CHAINS
Single Strand
Note : Spares E & F are available for all models
ANSI B 29.1
The American Heavy series roller chains are designed using link plates from the next higher size. The thicker link plates provide increased fatigue resistance and are used in drives subjected to heavy shock loads, multiple stops or reversing.
AMERICAN HEAVY SERIES
60H-1
80H-1
100H-1
120H-1
140H-1
160H-1
200H-1
D 122 01
D 162 01
D 202 01
D 242 01
D 282 01
D 322 01
D 402 01
19.05
25.40
31.75
38.10
44.45
50.80
63.50
12.58
15.75
18.90
25.23
25.23
31.55
37.85
11.91
15.88
19.05
22.23
25.40
28.58
39.68
5.96
7.94
9.54
11.11
12.71
14.29
19.85
18.00
24.10
30.16
36.20
42.20
48.20
60.30
14.88
20.80
26.00
31.20
36.20
41.60
52.00
3.20
4.00
4.70
5.56
6.30
7.14
9.50
3.20
4.00
4.70
5.56
6.30
7.14
9.50
31.20
38.00
45.40
55.10
60.40
70.00
93.10
35.40
43.40
51.50
61.70
67.80
77.90
103.30
1.14
1.89
2.75
4.10
5.20
7.10
12.17
1.81
3.00
4.38
6.61
8.33
10.33
20.65
3190
5670
9030
12950
17240
22680
36070
A,B,C,D
A,B,C,D
A,B,C,D
B,C,D
B,C,D
B,C,D
B,C,D
Int.Ref. No.
DIAMONDChain No.
Pitch(P)
WidthBetween
InnerPlates (W)(Min)
RollerDia(D)
(Max)
BearingPinDia(d)
(Max)
Plate Height
IP(H1)
(Max)
OP(H2)
(Max)
IP(T1)
OP(T2)
Plate Thickness WidthOver
BearingPin (A)
(Max)
WidthOverJoint
Fasteners(B)
(Max)
ProjectedBearing
AreaSq.cm
Avg.Weight
perMeter(Kg)
TensileStrength
(Kgf)(Min)
SparesAvailability
22
STANDARD ROLLER CHAINS
Double Strand
Note : Spares E & F are available for all models
ANSI B 29.1
AMERICAN HEAVY SERIES
60H-2
80H-2
100H-2
120H-2
140H-2
160H-2
200H-2
D 122 02
D 162 02
D 202 02
D 242 02
D 282 02
D 322 02
D 402 02
19.05
25.40
31.75
38.10
44.45
50.80
63.50
12.58
15.75
18.90
25.23
25.23
31.55
37.85
11.91
15.88
19.05
22.23
25.40
28.57
39.68
5.96
7.94
9.54
11.11
12.71
14.29
19.85
18.00
24.10
30.16
36.20
42.20
48.20
60.30
14.88
20.80
26.00
31.20
36.40
41.60
52.00
3.20
4.00
4.70
5.56
6.30
7.14
9.50
3.20
4.00
4.70
5.56
6.30
7.14
9.50
56.10
70.50
84.00
103.80
112.80
132.40
170.80
60.70
75.90
90.10
110.40
119.60
139.90
180.80
2.27
3.79
5.50
8.20
10.40
14.20
24.34
26.11
32.59
39.09
48.87
52.20
61.90
78.31
3.71
5.93
8.67
13.13
16.52
21.32
39.26
6380
11340
18060
25900
35160
46240
72140
A,B,C,D
A,B,C,D
A,B,C,D
B,C,D
B,C,D
B,C,D
B,C,D
Int.Ref. No.
DIAMONDChain No.
Pitch(P)
WidthBetween
InnerPlates (W)(Min)
RollerDia(D)
(Max)
BearingPinDia(d)
(Max)
Plate Height
IP(H1)
(Max)
OP(H2)
(Max)
IP(T1)
OP(T2)
Plate Thickness WidthOver
BearingPin (A)
(Max)
WidthOverJoint
Fasteners(B)
(Max)
TransversePitch(P1)
ProjectedBearing
AreaSq.cm
Avg.Weight
perMeter(Kg)
TensileStrength
(Kgf)(Min)
SparesAvailability
23
STANDARD ROLLER CHAINS
Triple Strand
Note : Spares E & F are available for all models
ANSI B 29.1
AMERICAN HEAVY SERIES
60H-3
80H-3
100H-3
120H-3
140H-3
160H-3
200H-3
D 122 03
D 162 03
D 202 03
D 242 03
D 282 03
D 322 03
D 402 03
19.05
25.40
31.75
38.10
44.45
50.80
63.50
12.58
15.75
18.90
25.23
25.23
31.55
37.85
11.91
15.88
19.05
22.23
25.40
28.57
39.68
5.96
7.94
9.54
11.11
12.71
14.29
19.85
18.00
24.10
30.16
36.20
42.20
48.20
60.30
14.88
20.80
26.00
31.20
36.40
41.60
52.00
3.20
4.00
4.70
5.56
6.30
7.14
9.50
3.20
4.00
4.70
5.56
6.30
7.14
9.50
82.20
103.30
123.40
152.40
164.30
193.70
252.60
86.80
108.70
129.50
159.00
171.90
210.60
262.80
26.11
32.59
39.09
48.87
52.20
61.90
78.31
26.11
32.59
39.09
48.87
52.20
61.90
78.31
5.52
8.86
12.96
19.64
24.73
31.77
60.79
9570
17010
27090
38850
52740
69360
108210
A,B,C,D
A,B,C,D
A,B,C,D
B,C,D
B,C,D
B,C,D
B,C,D
Int.Ref. No.
DIAMONDChain No.
Pitch(P)
WidthBetween
InnerPlates (W)(Min)
RollerDia(D)
(Max)
BearingPinDia(d)
(Max)
Plate Height
IP(H1)
(Max)
OP(H2)
(Max)
IP(T1)
OP(T2)
Plate Thickness WidthOver
BearingPin (A)
(Max)
WidthOverJoint
Fasteners(B)
(Max)
TransversePitch(P1)
ProjectedBearing
AreaSq.cm
Avg.Weight
perMeter(Kg)
TensileStrength
(Kgf)(Min)
SparesAvailability
24
STANDARD ROLLER CHAINS
Single Strand
Note : We do not recommend use of offset links and spring clip typeConnecting links (A, C & D) for Hi-Life Chains
ANSI B 29.1
The chains are dimensionally identical to American Heavy series chains. However the through hardened high tensile pins give the chain a higher working load capacity and improved fatigue resistance in high load and fluctuating type of applications.
HI - LIFE CHAINS -AMERICAN HEAVY SERIES
60H-1
80H-1
100H-1
120H-1
160H-1
200H-1
D 122 01HE01
D 162 01HE02
D 202 01HE02
D 242 01HE02
D 322 01HE01
D 402 01HE01
19.05
25.40
31.75
38.10
50.80
63.50
12.58
15.75
18.90
25.25
31.55
37.85
11.91
15.88
19.05
22.23
28.58
39.68
5.96
7.94
9.54
11.11
14.29
19.85
18.00
24.10
30.16
36.20
48.20
60.30
14.88
20.80
26.00
31.20
41.60
52.00
3.20
4.00
4.70
5.56
7.14
9.50
3.20
4.00
4.70
5.56
7.14
9.50
31.20
38.00
45.40
55.10
70.00
93.10
35.40
43.40
51.50
61.70
77.90
103.30
1.14
1.89
2.75
4.10
7.10
12.17
1.81
3.00
4.38
6.61
10.33
20.65
4600
8700
11500
16200
29000
52500
A,B,C,D
A,B,C,D
A,B,C,D
B,C,D
B,C,D
B,C,D
Int.Ref. No.
DIAMONDChain No.
Pitch(P)
WidthBetween
InnerPlates (W)(Min)
RollerDia(D)
(Max)
BearingPinDia(d)
(Max)
Plate Height
IP(H1)
(Max)
OP(H2)
(Max)
IP(T1)
OP(T2)
Plate Thickness WidthOver
BearingPin (A)
(Max)
WidthOverJoint
Fasteners(B)
(Max)
ProjectedBearing
AreaSq.cm
Avg.Weight
perMeter(Kg)
TensileStrength
(Kgf)(Min)
SparesAvailability
25
STANDARD ROLLER CHAINS
Note : Wherever international reference is not indicated models have beendeveloped for specific requirements.
*Straight Contour Chains
OTHER STANDARDS
81
-
08MA
83
J 415 F
10MA
-
12BH
-
-
-
-
-
-
D08001
D08101
D08201
D08G01
D08M01
D160 01
*D12301
D12H 01
D12601
*D14001
D160010005
D160010011
D560010001
SP1729
12.70
12.70
12.70
12.70
12.70
15.88
19.05
19.05
19.05
22.23
25.40
25.40
88.90
58.94
3.30
4.88
5.21
4.88
5.01
6.48
12.72
11.68
9.40
14.28
35.00
13.05
53.34
21.30
7.75
7.75
8.51
7.75
7.75
10.16
14.24
11.91
11.91
15.60
15.88
15.75
53.98
18.26
9.55
9.55
11.65
10.30
10.00
14.56
18.80
15.90
18.04
23.58
20.60
20.60
80.20
26.50
9.75
11.70
14.23
12.35
14.35
15.55
31.40
24.75
22.30
36.35
53.75
30.10
117.80
40.85
3.64
3.63
4.47
4.08
4.08
5.08
7.92
6.06
5.94
7.92
8.27
8.14
34.32
10.19
11.11
12.75
16.00
13.35
15.45
17.15
-
26.65
23.75
-
55.55
36.50
130.00
44.50
0.28
0.34
0.59
0.42
0.49
0.78
2.65
1.39
1.41
3.57
3.66
2.57
172.54
2.48
820
820
1820
1225
1600
1600
2200
2700
6000
3180
6120
6120
100000
4550
Int.Ref. No.
DIAMONDChain No.
Pitch(P)
WidthBetween
InnerPlates (W)(Min)
RollerDia(D)
(Max)
BearingPinDia(d)
(Max)
WidthOver
BearingPin (A)
(Max)
PlateHeight
(H)(Max)
WidthOverJoint
Fasteners(B)
(Max)
Avg. Weightper
Meter(Kg)
TensileStrength
(Kgf)(Min)
26
STANDARD ROLLER CHAINS
Single Strand
ANSI B 29.1
The straight plate chains are identical to the corresponding European series standard chains except for the straight side plates. The chain have higher fatigue resistance than the standard chains.
Note : Spares E & F are available for all models
STRAIGHT SIDE PLATE CHAINS - EUROPEAN SERIES
C08B
C10B
C12B
C16B
C20B
C24B
C28B
C32B
D083 01 ST 01
D101 01 ST 01
D120 01 ST 01
D160 01 ST 01
D160 01 ST 02
D200 01 ST 01
D240 01 ST 01
D280 01 ST 01
D320 01 ST 01
12.70
15.875
19.05
25.40
25.40
31.75
38.10
44.45
50.80
7.75
9.65
11.68
17.02
17.02
19.56
25.40
30.99
30.99
8.51
10.16
12.07
15.88
15.88
19.05
25.40
27.94
29.21
4.45
5.08
5.72
8.27
8.27
10.19
14.63
15.90
17.81
11.80
14.70
16.10
24.10
20.58
26.40
33.40
37.00
42.20
17.00
19.60
22.70
36.10
36.10
43.20
53.40
65.10
67.40
20.90
23.70
27.30
41.50
41.50
49.30
60.00
72.50
75.30
0.50
0.67
0.88
2.07
2.07
2.91
5.49
7.26
8.05
0.75
0.98
1.24
3.30
3.30
3.91
7.16
8.79
10.42
1840
2290
2960
6120
6120
9690
16310
20390
25500
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
B,C,D
B,C,D
B,C,D
Int.Ref. No.
DIAMONDChain No.
Pitch(P)
WidthBetween
Inner Plates(W)
(Min)
RollerDia(D)
(Max)
PlateHeight
(H)(Max)
BearingPin Dia
(d)(Max)
WidthOver
BearingPin (A)
(Max)
WidthOverJoint
Fasteners(B)
(Max)
ProjectedBearing
AreaSq.cm
Avg.Weight
perMeter(Kg)
TensileStrength
(Kgf)(Min)
SparesAvailability
27
STANDARD ROLLER CHAINS
Double Strand
Triple Strand
Note : Spares E & F are available for all models
C08B
C10B
C12B
C16B
C20B
C24B
C28B
C32B
D083 02 ST 01
D101 02 ST 01
D120 02 ST 01
D160 02 ST 01
D160 02 ST 02
D200 02 ST 01
D240 02 ST 01
D280 02 ST 01
D320 02 ST 01
12.70
15.875
19.05
25.40
25.40
31.75
38.10
44.45
50.80
7.75
9.65
11.68
17.02
17.02
19.56
25.40
30.99
30.99
8.51
10.16
12.07
15.88
15.88
19.05
25.40
27.94
29.21
4.45
5.08
5.72
8.27
8.27
10.19
14.63
15.90
17.81
11.81
14.73
16.13
24.10
20.58
26.42
33.40
37.08
42.29
31.00
36.20
42.20
68.00
68.00
79.70
101.80
132.10
133.90
34.90
40.30
46.80
73.40
73.40
85.80
108.40
132.10
133.90
13.92
16.59
19.46
31.88
31.88
36.45
48.36
59.56
58.55
1.00
1.34
1.76
4.14
4.14
5.82
10.98
14.52
16.10
1.44
1.97
2.27
5.81
5.78
7.72
14.15
17.39
20.63
3270
4540
5900
11600
11600
17330
28550
36700
45880
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
B,C,D
B,C,D
B,C,D
Int.Ref. No.
DIAMONDChain No.
Pitch(P)
WidthBetween
Inner Plates (W)(Min)
RollerDia(D)
(Max)
PlateHeight
(H)(Max)
BearingPin Dia
(d)(Max)
WidthOver
BearingPin (A)
(Max)
WidthOverJoint
Fasteners(B)
(Max)
TransversePitch
ProjectedBearing
AreaSq.cm
Avg.Weight
perMeter(Kg)
TensileStrength
(Kgf)(Min)
SparesAvailability
C08B
C10B
C12B
C16B
C20B
C24B
C28B
C32B
D083 03 ST 01
D101 03 ST 01
D120 03 ST 01
D160 03 ST 01
D160 03 ST 02
D200 03 ST 01
D240 03 ST 01
D280 03 ST 01
D320 03 ST 01
12.70
15.875
19.05
25.40
25.40
31.75
38.10
44.45
50.80
7.75
9.65
11.68
17.02
17.02
19.56
25.40
30.99
30.99
8.51
10.16
12.07
15.88
15.88
19.05
25.40
27.94
29.21
4.45
5.08
5.72
8.27
8.27
10.19
14.63
15.90
17.81
11.81
14.73
16.13
24.10
20.58
26.42
33.40
37.08
42.29
44.90
52.80
61.70
99.90
99.90
116.10
150.20
184.30
184.50
48.80
56.90
66.30
105.30
105.30
122.20
156.80
191.70
192.40
13.92
16.59
19.46
31.88
31.88
36.45
48.36
59.56
58.55
1.50
2.01
2.64
6.21
6.21
8.73
16.47
21.78
24.15
2.03
2.72
3.42
8.83
8.86
11.53
21.15
26.00
30.54
4850
6810
8850
17400
17400
25490
43330
54030
68300
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
B,C,D
B,C,D
B,C,D
Int.Ref. No.
DIAMONDChain No.
Pitch(P)
WidthBetween
Inner Plates (W)(Min)
RollerDia(D)
(Max)
PlateHeight
(H)(Max)
BearingPin Dia
(d)(Max)
WidthOver
BearingPin (A)
(Max)
WidthOverJoint
Fasteners(B)
(Max)
TransversePitch
ProjectedBearing
AreaSq.cm
Avg.Weight
perMeter(Kg)
TensileStrength
(Kgf)(Min)
SparesAvailability
28
40-1
40-2
40-3
50-1
50-2
50-3
60-1
60-2
60-3
80-1
80-2
80-3
100-1
100-2
100-3
120-1
120-2
120-3
160-1
160-2
160-3
D08A01ST01
D08A02ST01
D08A03ST01
D10201ST02
D10202ST02
D10203ST02
D12101ST01
D12102ST01
D12103ST01
D16101ST01
D16102ST01
D16103ST01
D20101ST01
D20102ST01
D20103ST01
D24101ST01
D24102ST01
D24103ST01
D32101ST01
D32102ST01
D32103ST01
12.70
15.875
19.05
25.40
31.75
38.10
50.80
7.85
9.40
12.58
15.75
18.90
25.22
31.55
7.92
10.16
11.91
15.88
19.05
22.23
28.57
3.98
5.09
5.94
7.94
9.54
11.11
14.29
12.00
15.00
18.00
24.10
30.16
36.20
48.20
1.50
2.00
2.39
3.20
4.00
4.70
6.30
1.50
2.00
2.39
3.20
4.00
4.70
6.30
17.80
32.30
46.70
21.80
39.90
57.90
26.90
49.60
72.60
33.50
62.70
91.90
41.10
77.90
113.00
50.80
96.30
141.03
65.20
124.00
182.00
21.70
38.20
50.80
25.90
44.00
62.00
31.50
53.80
77.20
38.90
68.10
97.10
47.20
83.10
119.10
57.40
102.90
147.60
73.60
131.90
189.90
14.38
18.11
22.78
29.29
35.76
45.44
58.55
0.67
1.32
1.98
1.59
2.06
3.07
1.76
3.12
4.67
3.23
5.20
7.77
4.01
7.93
11.86
5.74
11.37
17.01
7.47
14.81
22.16
1440
2820
4320
2270
4440
6810
3240
6360
9730
5780
11560
17340
9030
18060
27090
12950
25900
38850
23130
46250
69370
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
B,C,D
B,C,D
B,C,D
B,C,D
B,C,D
B,C,D
Int.Ref. No.
DIAMONDChain No.
Pitch(P)
WidthBetween
InnerPlates (W)(Min)
RollerDia(D)
(Max)
PlateHeight
(H)(Max)
PlateThickness
BearingPin Dia
(d)(Max)
IP(T1)
OP(T2)
WidthOver
BearingPin (A)
(Max)
WidthOverJoint
Fasteners(B)
(Max)
TransversePitch(P1)
Avg.Weight
perMeter(Kg)
TensileStrength
(Kgf)(Min)
SparesAvailability
STANDARD ROLLER CHAINS
ANSI B 29.4
This straight side plate chains are identical to the corresponding American standard chains except for the straight side plates. The chains have higher fatigue resistance than the standard chains
Note : Spares E & F are available for all models
STRAIGHT SIDE PLATE CHAINS - AMERICAN SERIES
29
STANDARD ROLLER CHAINS
American Series
ISO 1275/BS 4687/DIN 8181
European Series
The pitch of the chains is twice that of standard chains while other components have the same dimensions of the corresponding standard chains. These cost effective chains are used in light load drives typically agriculture.
Note : Above spares are available for all models
DOUBLE PITCH DRIVE CHAINS
A2040
A2050
A2060
A2080
A2100
A2120
E08A01
E10201
E12101
E16101
E20101
E24101
25.40
31.75
38.10
50.80
63.50
76.20
7.85
9.40
12.58
15.75
18.90
25.22
7.92
10.16
11.91
15.88
19.05
22.23
3.96
5.08
5.94
7.92
9.53
11.10
17.80
21.80
26.90
33.50
41.10
50.80
11.65
13.90
18.10
24.10
29.02
34.82
21.70
25.90
31.50
38.90
47.20
57.20
0.41
0.66
1.03
1.70
2.55
4.06
1440
2270
3240
5780
9030
12950
Int.Ref. No.
DIAMONDChain No.
Pitch(P)
WidthBetween
InnerPlates (W)(Min)
RollerDia(D)
(Max)
BearingPinDia(d)
(Max)
WidthOver
BearingPin (A)
(Max)
PlateHeight
(H)(Max)
WidthOverJoint
Fasteners(B)
(Max)
Avg.Weight
per Meter(Kg)
TensileStrength
(Kgf)(Min)
208B
210B
212B
216B
220B
224B
228B
232B
E083 01
E101 01
E120 01
E160 01
E200 01
E240 01
E280 01
E320 01
25.40
31.75
38.10
50.80
63.50
76.20
88.90
101.60
7.75
9.65
11.68
17.02
19.56
25.40
30.99
30.99
8.51
10.16
12.07
15.88
19.05
25.40
27.94
29.21
4.45
5.08
5.72
8.27
10.19
14.63
15.90
17.81
17.00
19.60
22.70
36.10
43.20
53.40
65.10
67.40
11.65
13.90
15.30
20.65
26.42
33.40
37.00
42.20
20.90
23.70
27.30
41.50
49.30
60.00
72.50
75.30
0.47
0.68
0.80
1.42
2.36
4.70
6.23
6.72
1840
2290
2960
6120
9690
16310
20390
25500
Int.Ref. No.
DIAMONDChain No
Pitch(P)
WidthBetween
InnerPlates (W)(Min)
RollerDia(D)
(Max)
BearingPinDia(d)
(Max)
WidthOver
BearingPin (A)
(Max)
PlateHeight
(H)(Max)
WidthOverJoint
Fasteners(B)
(Max)
Avg.Weight
per Meter(Kg)
TensileStrength
(Kgf)(Min)
30
STANDARD ROLLER CHAINS
Note : Above spares are available for all models
*Select roller diameter for ordering.
ISO 1275/ANSI B29.4
The chains are similar to double pitch power transmission chains, but the Link Plates have a straight contour and can be produced with standard or large rollers. They are used in conveyor applications where loads are low and speeds are moderate.
DOUBLE PITCH CONVEYOR CHAINS -AMERICAN SERIES
C 2040
C 2042
C 2050
C 2052
C 2060
C2062
C2060H
C2062H
C2080
C2082
C2080H
C2082H
C2100
C2102
C2100H
C2102H
C2120
C2122
C2120H
C2122H
C2160
C2162
C2160H
C2162H
A 08A 01
A 08A 02
A 102 01
A 102 02
A 121 01
A 121 02
A 122 01
A 122 02
A 161 01
A 161 02
A 162 01
A 162 02
A 201 01
A 201 02
A 202 01
A 202 02
A 241 01
A 241 02
A 242 01
A 242 02
A 321 01
A 321 02
A 322 01
A 322 02
25.40
31.75
38.10
38.10
50.80
50.80
63.50
63.50
76.20
76.20
101.60
101.60
7.85
9.40
12.58
12.58
15.75
15.75
18.90
18.90
25.22
25.22
31.55
31.55
7.92
15.88
10.16
19.05
11.91
22.23
11.91
22.23
15.88
28.58
15.88
28.58
19.05
39.67
19.05
39.67
22.23
44.45
22.23
44.45
28.58
57.15
28.58
57.15
3.96
5.08
5.94
5.94
7.92
7.92
9.53
9.53
11.10
11.10
14.27
14.27
17.80
21.80
26.90
31.20
33.50
38.00
41.10
43.40
50.80
55.10
65.50
70.00
11.66
14.58
18.06
18.06
24.05
24.05
29.26
29.26
36.20
36.20
48.26
48.26
21.70
25.90
31.50
35.80
38.90
43.40
47.20
46.70
57.80
61.70
73.40
77.90
0.49
0.84
0.81
1.28
1.20
1.92
1.50
1.92
2.10
3.18
2.52
3.60
3.21
5.45
3.56
5.38
4.66
7.66
5.26
8.26
8.15
13.00
9.06
12.77
1440
2270
3240
3240
5780
5780
9030
9030
12950
12950
23130
23130
Int.Ref. No.
DIAMONDChain No.
Pitch(P)
WidthBetween
InnerPlates (W)(Min)
RollerDia(D)
(Max)
BearingPinDia(d)
(Max)
WidthOver
BearingPin (A)
(Max)
PlateHeight
(H)(Max)
WidthOverJoint
Fasteners(B)
(Max)
Avg.Weight
per Meter(Kg)
TensileStrength
(Kgf)(Min)
31
ATTACHMENT CHAINS
08B
10B
12B
16B
20B
46 D 083 01 K1 00
46 D 101 01 K1 00
46 D 120 01 K1 00
32 D 160 01 K1 05
32 D 200 01 k1 01
12.586
15.77
18.91
25.235
31.60
1.58
1.58
1.81
3.05
3.53
11.00
14.28
15.88
18.85
26.15
4.50
5.30
6.60
6.80
9.00
6.54
9.17
11.08
12.50
17.01
12.34
15.60
18.23
24.50
30.25
8.89
10.31
13.46
15.90
19.80
36.40
44.63
52.35
74.80
90.00
25.40
31.80
38.10
50.80
63.50
BaseChainModel
Diamond Att.No. P T M D A L I B b
DIN 8187-2 Outer Attachment for European Series
ANSI B29.1 Outer Attachment for American Series
Note : Spares E & F are available for all models
SHORT PITCH K1 ATTACHMENTS
40
40
50
60
80
100
120
140
160
32 D 08A 01 K1 02
32 D 08A 01 K1 05
32 D 102 01 K1 06
32 D 121 01 K1 01
32 D 161 01 k1 01
32 D 201 01 K1 02
32 D 241 01 K1 03
32 D 281 01 K1 01
32 D 321 01 K1 02
12.586
12.586
15.77
18.91
25.247
31.75
38.10
44.45
50.80
1.50
1.50
2.00
2.39
3.05
4.00
4.70
5.56
6.30
11.40
11.40
14.27
15.88
45.90
22.25
28.45
34.85
37.85
4.20
6.00
5.10
5.10
7.00
8.21
9.81
11.38
13.11
7.00
7.00
8.82
10.05
13.70
17.87
20.08
27.29
27.83
14.07
14.07
17.50
18.77
27.20
28.32
34.38
43.44
47.53
7.90
7.90
10.31
11.90
12.70
19.84
23.01
28.58
31.75
39.74
39.50
49.10
55.60
73.80
84.40
104.80
121.20
141.00
25.40
25.40
31.75
38.10
50.80
63.50
76.20
88.90
101.60
BaseChainModel
Diamond Att.No. P T M D A L I B b
33
ATTACHMENT CHAINS
Work Standard Outer Attachment for European Series
Work Standard Inner Attachment for European Series
Note : Please select the required attachment plate and specify the frequency ofpositioning the attachments while ordering for chains.
06B
08B
10B
12B
16B
32 D 061 01 K1 02
32 D 083 01 K1 05
32 D 101 01 K1 02
32 D 120 01 k1 04
32 D 160 01 K1 01
9.45
12.586
15.77
18.91
25.247
1.00
1.58
1.58
1.81
3.05
8.00
9.50
14.10
15.85
45.90
3.50
4.30
5.20
5.60
8.05
5.04
8.24
9.18
9.51
13.70
9.04
12.74
17.10
17.50
25.11
6.05
8.40
10.40
12.00
14.80
27.00
37.20
47.60
51.60
76.00
19.00
28.20
31.80
35.00
53.20
BaseChainModel
Diamond Att.No. P T M D A L I B b
06B
08B
10B
12B
16B
20B
34 D 061 01 K1 00
34 D 083 01 K1 09
34 D 101 01 K1 03
34 D 120 01 k1 05
34 D 160 01 K1 07
34 D 200 01 k1 02
9.45
12.70
15.862
19.05
25.40
31.75
1.25
1.58
1.58
1.81
3.60
4.40
8.00
9.50
14.10
16.00
19.00
25.25
3.50
4.30
5.20
5.60
6.80
8.40
6.51
10.06
10.94
11.54
16.32
21.70
10.51
14.56
17.10
17.50
25.50
32.95
6.50
8.40
10.40
12.00
15.90
19.85
27.00
37.20
44.12
47.21
69.17
83.80
19.00
28.20
31.80
35.00
50.80
63.50
BaseChainModel
Diamond Att.No. P T M D A L I B b
34
08B
10B
12B
16B
20B
48 D 083 01 K2 00
48 D 101 01 k2 00
48 D 120 01 K2 00
32 D 160 01 K2 19
48 D 200 01 k2 00
12.586
15.77
18.91
25.40
31.75
1.58
1.58
1.81
3.05
3.53
4.50
5.50
6.60
6.80
9.00
23.22
29.31
32.99
45.90
58.04
6.84
9.17
11.08
12.50
17.00
12.34
15.60
18.23
26.20
28.10
8.89
10.30
13.40
15.90
19.80
36.40
44.63
52.40
78.20
85.70
25.40
31.80
38.10
50.80
63.50
BaseChainModel
Diamond Att.No. P T M D A L I B b
ATTACHMENT CHAINS
DIN 8187-2 Outer Attachment for European Series
ANSI B29.1 Outer Attachment for American Series
Note : Spares E & F are available for all models
SHORT PITCH K2 ATTACHMENTS
40
50
60
80
100
120
140
160
32 D 08A 01 K2 01
32 D 102 01 K2 01
32 D 121 01 k2 01
32 D 161 01 K2 03
32 D 201 01 K2 01
32 D 241 01 K2 01
32 D 281 01 K2 01
32 D 321 01 k2 01
12.586
15.77
19.05
25.247
31.75
38.10
44.45
50.80
1.50
2.00
2.39
3.05
4.00
4.70
5.56
6.30
4.20
5.50
5.10
5.00
8.21
9.81
11.38
13.11
23.33
29.28
34.87
45.90
56.69
68.71
80.52
91.44
7.00
8.85
10.05
16.85
17.87
20.08
27.29
27.83
14.07
16.35
18.90
27.20
28.32
34.38
43.44
47.53
7.90
10.30
11.90
12.70
19.84
23.01
28.58
31.75
39.74
46.80
55.80
77.80
84.40
104.80
121.20
141.00
25.40
31.81
38.10
50.80
63.50
76.20
88.90
101.60
BaseChainModel
Diamond Att.No. P T M D A L I B b
06B
08B
10B
12B
16B
32 D 061 01 K2 01
32 D 083 01 K2 03
32 D 101 01 K2 01
32 D 120 01 K2 04
32 D 160 01 K2 01
9.45
12.586
15.77
18.91
25.40
1.00
1.58
1.58
1.81
3.05
3.50
4.30
5.20
5.60
8.00
17.60
23.22
29.31
32.99
45.90
5.04
8.24
9.18
9.52
13.71
9.04
12.74
17.10
22.54
25.11
6.50
8.40
10.40
12.00
14.80
27.00
37.20
47.60
61.00
76.00
19.00
28.20
31.80
35.06
53.20
BaseChainModel
Diamond Att.No. P T M D A L I B b
DIN 8187-2 Outer Attachment for European Series
35
ATTACHMENT CHAINS
DIN 8187-2 Outer Attachment for European Series
ANSI B29.1 Outer Attachment for American Series
SHORT PITCH M1 ATTACHMENTS
08B
10B
12B
16B
20B
42 D 083 01 M1 00
42 D 101 01 M1 00
42 D 120 01 M1 00
42 D 160 01 M1 00
42 D 200 01 M1 00
12.59
15.77
18.91
25.235
31.75
1.58
1.58
1.81
3.05
3.53
4.50
5.30
6.60
6.60
9.00
11.00
14.28
15.88
19.05
25.25
13.00
16.50
21.00
23.15
30.50
18.42
23.10
28.43
33.82
42.00
BaseChainModel
Diamond Att.No. P T d M N H
40
50
60
80
100
120
140
160
32 D 08A 01 M1 02
31 D 102 01 M1 03
31 D 121 01 M1 01
31 D 161 01 BM1
31 D 201 01 M1 01
31 D 241 01 M1 01
31 D 281 01 M1 01
31 D 321 01 M1 01
12.586
15.77
19.05
25.247
31.75
38.10
44.45
50.80
1.50
2.00
2.39
3.15
4.00
4.70
5.50
6.30
4.20
5.10
5.10
6.60
8.21
9.81
11.38
13.11
11.40
14.28
15.88
18.85
22.25
28.45
34.85
37.85
12.70
15.52
19.05
25.40
31.75
38.10
44.50
50.80
19.24
24.20
26.70
34.95
42.00
52.55
64.32
68.15
BaseChainModel
Diamond Att.No. P T d M N H
36
ATTACHMENT CHAINS
Work Standard Outer Attachment for European Series
Note : Please select the required attachment plate and specify the frequency ofpositioning the attachments while ordering for chains.
06B
08B
10B
12B
16B
20B
31 D 061 01 M1 03
31 D 083 01 M1 02
31 D 101 01 M1 02
31 D 120 01 M1 02
31 D 160 01 M1 03
31 D 200 01 M1 01
9.45
12.586
15.77
18.91
25.235
31.75
1.00
1.58
1.58
1.81
3.05
3.53
3.50
4.30
5.20
5.60
6.08
8.40
8.00
9.50
14.10
15.85
18.85
25.25
9.75
14.10
15.90
17.90
26.00
31.75
13.75
18.34
24.70
26.23
34.95
42.00
BaseChainModel
Diamond Att.No. P T d M N H
Work Standard Inner Attachment for European Series
06B
08B
10B
12B
16B
20B
34 D 061 01 M1 00
33 D 083 01 M1 08
33 D 101 01 M1 03
33 D 120 01 M1 05
33 D 160 01 M1 05
33 D 200 01 M1 01
9.525
12.70
15.862
19.05
25.40
31.75
1.00
1.58
1.58
1.81
3.60
4.40
3.50
4.30
5.20
5.60
6.80
9.00
8.00
9.50
14.10
16.00
19.00
25.25
9.50
14.10
15.90
17.90
26.00
30.50
13.41
18.40
24.70
26.23
34.95
42.00
BaseChainModel
Diamond Att.No. P T d M N H
37
DIN 8187-2 Outer Attachment for European Series
08B
10B
12B
16B
20B
44 D 083 01 M2 00
44 D 101 01 M2 00
44 D 120 01 M2 00
44 D 160 01 M2 00
44 D 200 01 M2 00
12.586
15.77
18.91
25.235
31.75
1.58
1.58
1.81
3.05
3.53
4.50
5.30
6.60
6.60
9.00
23.22
29.31
32.99
45.90
58.04
13.00
16.50
21.00
23.15
30.50
18.34
23.10
28.43
33.82
42.00
BaseChainModel
Diamond Att.No. P T d M N H
ATTACHMENT CHAINSSHORT PITCH M2 ATTACHMENTS
Note : Please select the required attachment plate and specify the frequency ofpositioning the attachments while ordering for chains.
ANSI B29.1 Outer Attachment for American Series
40
50
60
80
100
120
140
160
31 D 08A 01 M2 02
31 D 102 01 M2 03
31 D 121 01 M2 01
31 D 161 01 BM2
31 D 201 01 M2 01
31 D 241 01 M2 01
31 D 281 01 M2 01
31 D 321 01 M2 01
12.586
15.77
19.05
25.247
31.75
38.10
44.45
50.80
1.50
2.00
2.39
3.15
4.00
4.70
5.50
6.30
4.20
5.10
5.10
6.60
8.21
9.81
11.38
13.11
23.22
29.31
34.87
45.90
56.69
68.71
80.52
91.44
12.70
15.88
19.05
25.40
31.75
36.53
44.50
50.80
19.24
24.20
26.70
36.64
42.00
52.55
64.32
68.15
BaseChainModel
Diamond Att.No. P T d M N H
Work Standard Outer Attachment for European Series
06B
08B
10B
12B
16B
31 D 061 01 M2 00
31 D 083 01 M2 02
31 D 101 01 M2 01
31 D 120 01 m2 02
31 D 160 01 M2 02
9.45
12.586
15.77
18.91
25.235
1.00
1.58
1.58
1.81
3.05
3.50
4.30
5.20
5.60
6.80
17.60
23.22
29.31
32.99
45.90
9.50
14.40
15.90
17.90
26.00
13.41
18.34
24.70
31.28
36.64
BaseChainModel
Diamond Att.No. P T d M N H
38
ATTACHMENT CHAINS
BaseChainModel
Diamond Att.No. Pitch(P)
Thickness(t)
M d D C
C 2040
C 2042
C 2050
C 2052
C 2060
C2062
C2060H
C2062H
C2080
C2082
C2080H
C2082H
C2100
C2102
C2100H
C2102H
C2120
C2122
C2120H
C2122H
C2160
C2162
C2160H
C2162H
32-A 08A 01 BK1
32-A 102 01 BK1
32-A 121 01 K1 01
32-A 122 01 K1 01
32-A 161 01 K1 01
32-A 162 01 K1 01
32-A 201 01 K1 01
32-A 202 01 k1 01
32-A 241 01 K1 01
32-A 242 01 K1 01
32-A 321 01 K1 01
32-A 322 01 K1 01
25.40
31.75
38.10
38.10
50.80
50.80
63.50
63.50
76.20
76.20
101.60
101.60
1.50
2.00
2.40
3.15
3.15
4.00
4.00
4.70
4.70
5.56
5.56
7.14
19.10
23.80
28.60
28.60
38.10
38.10
47.60
47.60
57.20
57.20
76.20
76.20
3.33
5.10
5.08
5.08
6.80
6.80
8.20
8.20
9.80
9.80
13.11
13.11
12.70
15.90
21.44
21.44
27.80
27.80
33.32
33.32
39.67
39.67
52.37
52.37
9.12
11.10
14.68
14.68
19.10
19.10
23.42
23.42
27.80
27.79
36.53
36.53
ANSI 29.4 Outer Attachment for American Series
Note : Please select the required attachment plate and specify the frequency ofpositioning the attachments while ordering for chains.
DOUBLE PITCH K1 ATTACHMENTS
39
ATTACHMENT CHAINS
Note : Please select the required attachment plate and specify the frequency ofpositioning the attachments while ordering for chains.
DOUBLE PITCH K2 ATTACHMENTS
BaseChainModel
Diamond Att.No. Pitch(P)
Thickness(t)
M d D C P1
C 2040
C 2042
C 2050
C 2052
C 2060
C2062
C2060H
C2062H
C2080
C2082
C2080H
C2082H
C2100
C2102
C2100H
C2102H
C2120
C2122
C2120H
C2122H
C2160
C2162
C2160H
C2162H
32-A 08 01 K201
32-A 102 01 SK2
32-A 121 01 SK2
32-A 122 01 K2 01
32-A 161 01 K2 01
32-A 162 01 K2 05
32-A 201 01 K2 01
32-A 202 -1 K2 01
32-A 241 01 K2 01
32-A 242 01 K2 01
32- A 321 01 K2 01
32-A 322 01 K2 01
25.40
31.75
38.10
38.10
50.80
50.80
63.50
63.50
76.20
76.20
101.60
101.60
1.50
2.00
2.39
3.15
3.15
4.00
4.00
4.70
4.70
5.56
5.56
7.14
19.10
23.80
28.60
28.60
38.10
38.10
47.60
47.60
57.20
57.20
76.20
76.20
3.33
5.20
5.20
5.20
6.80
6.80
8.20
8.20
9.80
9.80
13.11
13.11
12.70
15.90
21.40
21.45
27.80
27.80
33.32
33.32
39.67
39.67
52.37
52.37
9.12
11.10
14.70
14.70
19.10
19.10
23.42
23.42
27.79
27.79
36.53
36.53
9.52
11.90
14.30
14.30
19.10
19.05
23.80
23.80
28.58
28.58
38.10
38.10
ANSI B29.4 Outer Attachment for American Series
40
“U” ATTACHMENT SPIKE ATTACHMENT
WELDED ATTACHMENT WITHTEFLON WASHER
PRINTING INDUSTRY
SPECIAL ATTACHMENT REDLER ATTACHMENT
WORK STANDARD ATTACHMENT CHAINS
EXTENDED PIN CHAINS
Note : Please specify Extended Pin type, Length, Diameter and Frequency while ordering for chains.(Pin Extension can be provided on one side or both sides)
*Straight side plate chains
HOLE TYPE GROOVE TYPE DOUBLE SIDE EXTENDED TYPE
The series of Extended Pin Chains are used to transfer parts to different work stations, in indexing Mechanisms etc.
SHORT PITCH CHAINS
Intl. Ref. No. DIAMOND Chain No. Extended Pin Dia(d)
(Max)
Pin Extension(L1)
(Norm)
Extended Pin Length
(A) (Norm)
ExtendedConnectingpin length
(B)(Norm)
Average WeightPer metre
(Kg)
05B-1
05B-1
06B-1*
06B-1*
06B-1*
08B-1
08B-1
081C-1
10B-1
12B-1
16B-1
40-1
60-1
D05B01J101
D05B01J104
D06101J101
D06101J103
D06101J102
D08301J115
D08301J117
D08001J101
D10101J102
D12001J112
D16001J112
D08A01J101
D12101J104
2.31
2.31
3.27
3.27
3.27
4.45
4.45
3.63
5.08
5.72
8.27
3.97
5.94
3.00
5.00
4.42
11.10
21.75
15.15
44.00
12.00
17.63
20.83
33.80
16.20
24.10
10.95
12.25
16.05
22.75
33.50
30.91
59.80
20.95
35.26
41.66
67.58
31.60
48.25
11.85
13.15
17.65
24.35
35.00
33.00
61.90
22.16
36.85
43.07
69.42
32.60
49.65
0.18
0.19
0.42
0.47
0.43
0.75
0.89
0.37
1.07
1.22
3.03
0.75
1.77
42
American Series
EXTENDED PIN CHAINS
Intl. Ref. No. DIAMOND Chain No. Pitch(P)
WidthBetween
Inner Plates(W)
(Min)
RollerDia(D)
(Max)
PinExtension
ExtendedPin
Length
A2040
A2050
A2060
A2080
A2100
A2120
E08A01
E10201
E12101
E16101
E20101
E24101
25.40
31.75
38.10
50.80
63.50
76.20
7.85
9.40
12.58
15.75
18.90
25.22
7.92
10.16
11.91
15.88
19.05
22.23
3.96
5.08
5.94
7.92
9.53
11.10
9.50
11.90
14.60
19.00
23.80
28.60
16.70
21.00
27.80
35.30
43.40
52.40
ExtendedPin Dia
(d)(Max)
European Series
Note : Please specify Extended Pin type, Length, Diameter and Frequency while ordering for chains.(Pin Extension can be provided on one side or both sides)
HOLE TYPE GROOVE TYPE DOUBLE SIDE EXTENDED TYPE
The series of Extended Pin Chains are used to transfer parts to different work stations, in indexing Mechanisms etc.
DOUBLE PITCH CHAINS
208B
210B
212B
216B
220B
E08301
E10101
E12001
E16001
E20001
25.40
31.75
38.10
50.80
63.50
7.75
9.65
11.68
17.02
19.65
8.51
10.16
12.07
15.88
19.05
4.45
5.08
5.72
8.27
10.19
9.50
11.90
14.60
19.00
28.80
16.70
21.00
27.80
35.30
43.40
43
American Series
DOUBLE PITCH
Note : Please specify Extended Pin type, Length, Diameter and Frequency while ordering for chains.(Pin Extension can be provided on one side or both sides)
HOLE TYPE GROOVE TYPE DOUBLE SIDE EXTENDED TYPE
The series of Extended Pin Chains are used to transfer parts to different work stations, indexing Mechanisms etc.
American Series
STRAIGHT SIDE PLATE - AMERICAN SERIES
Intl. Ref. No. DIAMOND BaseChain No.
Pitch(P)
Width BetweenInner Plates
(W)(Max)
RollerDia(D)
(Max)
ExtendedPin Dia
(d)(Max)
*PinExtension
(L1)
ExtendedPin
Length(L2)
C2020
C2042
C2050
C2052
C2060
C2062
C2060H
C2062H
C2080
C2082
C2080H
C2082H
C2100
C2102
C2100H
C2102H
C2120
C2122
C2120H
C2122H
A 08A 01
A 08A 02
A 102 01
A 102 02
A 121 01
A 121 02
A 122 01
A 122 02
A 161 01
A 161 02
A162 01
A 161 02
A 201 01
A 201 02
A 202 01
A 202 02
A 241 01
A 241 02
A 242 01
A 242 02
25.40
31.75
38.10
38.10
50.80
50.80
63.50
63.50
76.20
76.20
7.85
9.40
12.57
12.57
15.75
15.75
18.90
18.90
25.23
25.23
7.92
15.88
10.16
19.05
11.91
22.23
11.91
22.23
15.88
28.58
15.88
28.58
19.05
39.67
19.05
39.67
22.23
44.45
22.23
44.45
3.96
3.96
5.08
5.08
5.94
5.94
5.94
5.94
7.92
7.92
7.92
7.92
9.53
9.53
9.53
9.53
11.10
11.10
11.10
11.10
9.50
9.50
11.90
11.90
14.60
14.60
14.60
14.60
19.00
19.00
19.00
19.00
23.80
23.80
23.80
23.80
28.60
28.60
28.60
28.60
16.70
16.70
21.00
21.00
27.80
27.80
27.80
27.80
35.30
35.30
35.30
35.30
43.40
43.40
43.40
43.40
52.40
52.40
52.40
52.40
44
EXTENDED PIN CHAINS WITH THREADS
EXTENDED PIN WITH PLASTIC ROLLER
NICKEL PLATED EXTENDED PIN CHAINS
WORK STANDARD EXTENDED PIN CHAINS
45
TYPE 1 - WITH ROLLER, WITHOUT BUSH
TYPE 2 - WITH ROLLER AND BUSH
HOLLOW PIN CHAINS
The series of hollow pin chains are used in conveyor applications allowing easy insertion of cross rods or attachments at desired frequency.
*Straight sided plates
DIAMONDChain No.
Pitch(P)
WidthBetween
Inner Plates(W)
(Min)
RollerDia(D)
(Max)
PlateHeight
(H)(Max)
PinInner
Diameter(d1)
(Min)
PinOuter
Diameter(d2)
PinLength
(A)(Max)
D061 01 HP 01 *
D083 01 HP 02
D101 01 HP 02
D102 01 HP 01
D120 01 HP 01
D160 01 HP 01
9.525
12.70
15.875
15.875
19.05
25.40
5.72
7.75
9.65
9.40
11.68
17.02
6.35
8.51
10.16
10.61
12.07
15.88
8.20
11.80
14.70
14.70
16.10
21.00
3.30
4.50
5.18
5.18
5.85
8.33
4.77
6.28
7.02
7.02
8.09
11.61
13.75
17.00
19.60
20.60
22.70
36.10
Avg. WeightPer
Meter(Kg)
0.35
0.58
0.77
0.82
0.98
2.21
TensileStrength
(Kgf)(Min)
550
1100
1500
1500
1700
3340
EndCondition
E
E
E
E
E
E
DIAMONDChain No.
Pitch(P)
WidthBetween
Inner Plates(W)
(Min)
RollerDia(D)
(Max)
PlateHeight
(H)(Max)
PinInner
Diameter(d1)
(Min)
PinOuter
Diameter(d2)
PinLength
(A)(Max)
D120 01 HP 02
D160 01 HP 02
19.05
25.40
11.68
17.02
12.07
15.88
16.10
21.00
5.00
5.00
8.08
8.26
22.70
33.90
Avg. WeightPer
Meter(Kg)
1.13
2.34
TensileStrength
(Kgf)(Min)
2300
3690
EndCondition
E
E
46
TYPE 3 - WITH BUSH, WITHOUT ROLLER
HOLLOW PIN CHAINS
Small Roller ChainsTYPE 4 - DOUBLE PITCH HOLLOW PIN CHAINS Small Roller Chains
DIAMONDChain No.
Pitch(P)
WidthBetween
Inner Plates(W)
(Min)
RollerDia(D)
(Max)
PlateHeight
(H)(Max)
PinInner
Diameter(d1)
(Min)
PinOuter
Diameter(d2)
PinLength
(A)(Max)
B 083 D1 HP 01
B 101 01 HP 01
B 102 01 HP 01
B 120 01 HP 01
12.70
15.875
15.875
19.05
7.75
9.65
9.53
11.68
8.51
10.16
10.16
12.07
11.80
14.70
14.70
16.10
4.50
5.18
5.18
5.85
6.28
7.02
7.02
8.09
17.20
19.60
20.50
22.70
Avg. WeightPer
Meter(Kg)
0.58
0.73
0.85
1.10
TensileStrength
(Kgf)(Min)
950
1300
1850
1300
EndCondition
E
E
E
E
DIAMONDChain No.
Pitch(P)
WidthBetween
Inner Plates(W)
(Min)
RollerDia(D)
(Max)
PlateHeight
(H)(Max)
PinInner
Diameter(d1)
(Min)
PinOuter
Diameter(d2)
PinLength
(A)(Max)
A 102 01 HP 01
A 121 01 HP 01
31.75
38.10
9.40
12.57
10.16
11.91
14.58
18.06
5.16
5.99
7.02
8.38
20.50
25.50
Avg. WeightPer
Meter(Kg)
0.88
1.08
TensileStrength
(Kgf)(Min)
1630
2310
EndCondition
G
G
47
TYPE 5 - WITH CARRIER ROLLERS
HOLLOW PIN CHAINS
Large Roller Chains
*Straight Contour Chains**Stainless Steel Chains and Plastic Roller Chains are also available
End Conditions
DIAMONDChain No.
Pitch(P)
WidthBetween
Inner Plates(W)
(Min)
RollerDia(D)
(Max)
PlateHeight
(H)(Max)
PinInner
Diameter(d1)
(Min)
PinOuter
Diameter(d2)
PinLength
(A)(Max)
A 102 02 HP 01
A 121 02 HP 01
A 161 02 HP 01
31.75
38.10
50.80
9.40
12.57
15.75
19.05
22.23
28.58
15.09
18.06
24.05
5.16
5.99
8.02
7.02
8.38
11.38
20.50
25.50
32.50
Avg. WeightPer
Meter(Kg)
1.26
1.38
3.17
TensileStrength
(Kgf)(Min)
1630
2310
4190
EndCondition
G
G
G
DIAMONDChain No.
Pitch(P)
WidthBetween
InnerPlates
(W)(Min)
RollerDia(D)
(Max)
Pin InnerDiameter
(d1)(Min)
Pin OuterDiameter
(d2)(Min)
PlateWidth
IP (H1)
(Max)
PlateWidth
OP(H2)
(Max)
U 25401 HP 01
U 38101 HP 01
U 38101 HP 05*
U 50001 HP 02**
U 50801 HP 01**
U 50801 HP 02**
U 63001 HP 01
U 63005 HP 01 *
25.40
38.10
38.10
50.00
50.80
50.80
63.00
63.00
8.00
8.00
12.70
10.00
10.00
10.00
10.00
15.00
20.00
20.00
25.40
30.00
30.00
30.00
30.00
40.00
5.20
5.20
8.30
8.30
8.30
8.30
8.30
12.10
8.00
8.00
11.62
11.62
11.62
11.62
11.62
16.00
17.20
17.20
21.20
26.20
26.20
26.20
26.20
28.70
15.20
15.20
21.20
21.20
26.20
21.20
26.20
28.70
InnerPlate
Thickness(T)
2.00
2.00
2.40
3.00
3.00
3.00
3.00
4.00
WidthOver
BearingPin(A)
(Max)
19.50
19.50
26.50
26.50
26.50
26.50
26.50
35.00
WidthOverJoint
Fasteners(B)
(Max)
AverageWeight
PerMeter(Kg)
TensileStrength
(Kgf)(Min)
20.65
20.65
28.50
28.50
28.50
28.50
28.50
36.80
1.23
0.95
2.11
0.98
2.12
2.13
2.00
4.25
2500
2800
3060
5100
5100
5100
5100
5000
48
Note : Spares available for all models
ACCUMULATOR CHAINS
TYPE - 1
This type of conveyor chain are used for transporting parts, plates, pallets etc., which rests on the accumulator roller while the chain moves at a constant linear speed.
DIAMONDChain No.
Pitch(P)
WidthBetween
InnerPlates
(W)(Min)
Width OfOutboard
Roller(b1)
Dia OfOutboard
Roller(D)
(Max)
Pin Dia(d)
(Max)
PinLength
(A)(Max)
CentreDistance
(E)
D083010B02
D120010B01
D120010B02
D120010B03
D160010B01
12.70
19.05
19.05
19.05
25.40
7.75
11.68
11.68
11.68
17.02
4.03
11.10
7.50
8.80
12.50
8.51
12.07
12.07
12.07
15.88
4.45
5.72
5.72
5.72
8.27
27.25
48.00
40.25
43.00
65.25
19.10
31.50
27.00
29.20
45.00
Conveyor Rollers
Dia(D1)
(Max)
Material
Steel Plastic
16.00
24.00
28.00
26.00
38.50
å
å
å
å
å
AvgWeight
PerMeter(Kg)
TensileStrength
(Kgf)(Min)
å
å
å
å
å
1.31
2.98
2.53
2.12
5.64
1820
2950
2950
2950
5800
49
Note : Special requirements of ‘E’ and ‘D1’can be made on request
DIAMONDChain No.
Pitch(P)
WidthBetween
InnerPlates
(W)(Min)
Width OfOutboard
Roller(b1)
Dia OfOutboard
Roller(D)
(Max)
Pin Dia(d)
(Max)
PinLength
(A)(Max)
CentreDistance
(E)
D083030003
D120030001
D120030002
D160030001
D160030002
12.70
19.05
19.05
25.40
25.40
7.75
11.68
11.68
17.02
17.02
8.51
12.07
12.07
15.88
15.88
4.45
5.72
5.72
8.28
8.28
44.90
61.70
61.72
99.90
99.90
46.75
63.00
63.00
101.50
101.50
27.84
38.92
38.92
63.76
63.76
Conveyor Rollers
Dia(D1)
(Max)
Material
Steel Plastic
16.00
22.00
28.00
38.50
27.00
å
å
å
å
å
AvgWeight
PerMeter(Kg)
TensileStrength
(Kgf)(Min)
ã
ã
ã
ã
ã
2.33
3.42
4.04
10.63
9.25
4540
8850
8850
17400
17400
ACCUMULATOR CHAINS
TYPE - 2
50
Note : Chains with large rollers are also available on request
ACCUMULATOR CHAINS
American Series
TOP ROLLER CHAINS
SIDE ROLLER CHAINS
Intl.Ref.No.
DIAMOND Chain No.
Pitch(P)
WidthBetween
InnerPlates
(W)(Min)
Roller Dia Pin(Max)
Link Plate
(d) (L1) (L2) (H) (T) Steel Plastic(D) (D1)
C2040
C2050
C2060
C2080
C2100
A 08A01 TR01
A 10201 TR01
A 12101 TR01
A 16101 TR01
A 20101 TR01
25.40
31.75
38.10
50.80
63.50
7.85
10.16
11.91
15.88
19.05
7.92
10.16
11.91
15.88
19.05
15.88
19.05
22.23
28.58
39.67
3.97
5.08
5.94
7.92
9.53
8.25
10.30
14.55
18.30
21.80
9.95
12.00
14.55
18.30
21.80
11.66
14.58
18.06
24.05
29.26
1.50
2.00
3.15
4.00
4.70
Cs Xs Mateial
15.00
19.00
23.00
29.00
35.40
21.00
26.50
31.60
40.50
49.70
å
å
å
å
å
å
å
å
å
å
Intl.Ref.No.
DIAMONDBase
Chain No.
Pitch(P)
WidthBetween
InnerPlates
(W)(Min)
Plate Pin
(H) (d) (L1) (L2) (L3) (D1) (B1) Steel Plastic
RollerDia(D)
(Max)(T)
C2040
C2050
C2060
C2080
C2100
A 08A01 SR01
A 10201 SR01
A 12101 SR01
A 16101 SR01
A 20101 SR01
25.40
31.75
38.10
50.80
63.50
7.85
9.40
12.58
15.75
18.90
7.94
10.16
11.91
15.88
19.05
1.50
2.00
2.39
4.00
4.70
11.66
14.58
18.06
24.05
29.26
3.96
5.08
5.94
7.92
9.53
9.65
11.90
16.95
20.95
24.50
17.90
21.60
29.65
36.65
44.20
19.30
23.20
32.05
39.65
47.30
Outboard Roller Mateial
15.88
19.05
22.23
28.58
39.69
7.80
9.40
12.60
15.80
19.00
å
å
å
å
å
å
å
å
å
å
51
DOUBLE PLUS CHAINS WITH STEEL ROLLERS
DOUBLE PLUS CHAINS WITH PLASTIC ROLLERS
Intl.Ref.No.
TIDC Part No. P D W2 T1 T1 H d L1 L2
Avg.wt.Per
Meter(Kg)
LoadCarryingCapacity
Roller
D1 W1
C2040
C2050
C2060H
C2080H
A 08A 01 DPS 01
A 102 01 DPS 01
A 122 01 DPS 01
A 162 01 DPS 01
25.40
31.75
38.10
50.80
15.88
19.05
22.20
28.58
24.60
30.60
36.80
48.00
10.30
13.00
16.00
20.00
5.70
7.10
8.25
15.00
1.50
2.00
3.15
4.00
1.50
2.00
3.25
4.00
11.56
14.48
17.96
23.95
3.96
5.08
5.93
7.91
30.60
39.10
48.10
70.50
34.00
42.50
50.25
74.10
2.50
3.93
6.17
10.46
160
250
380
550
Intl.Ref.No.
TIDC Part No. P D W2 T1 T1 H d L1 L2
Avg.wt.Per
Meter(Kg)
D1 W1
C2040
C2050
C2060H
C2080H
A 08A 01 DPP 01
A 102 01 DPP 01
A 122 01 00 05
A 162 01 DPP 01
25.40
31.75
38.10
50.80
15.88
19.05
22.20
28.58
24.60
30.60
36.80
48.00
10.30
13.00
16.00
20.00
5.70
7.10
8.25
15.00
1.50
2.00
3.15
4.00
1.50
2.00
3.25
4.00
11.56
14.48
17.96
23.95
3.96
5.08
5.93
7.91
30.60
39.10
48.10
70.50
34.00
42.50
50.25
74.10
0.90
1.34
2.20
3.58
52
DOUBLE PLUS CHAIN WITHSTEEL ROLLERS & SNAP COVER
DOUBLE PLUS CHAINS WITH PLASTIC ROLLERS & SNAP COVER
Intl.Ref.No.
TIDC Part No. P D W2 T1 T1 H d L1 L2 S1 S2 S3
Avg.wt.Per
Meter(Kg)
LoadCarryingCapacity/
Roller(Kg)
D1 W1
C2040
C2050
C2060H
A 08A 01 DPS SC 01
A 102 01 DPS SC 01
A 122 01 DPS SC 01
25.40
31.75
38.10
15.88
19.05
36.80
15.88
19.05
22.20
10.30
13.00
16.00
5.70
7.10
8.25
1.50
2.00
3.15
1.50
2.00
3.15
11.56
14.48
17.96
3.96
5.08
5.93
31.00
38.80
49.14
33.58
41.21
51.27
10.90
13.40
15.50
9.90
12.50
14.00
12.70
16.90
20.70
2.50
3.93
6.17
160
250
380
Intl.Ref.No.
TIDC Part No. P D W2 T1 T1 H d L1 L2 S1 S2 S3
Avg.wt.Per
Meter(Kg)
D1 W1
C2040
C2050
C2060H
A 08A 01 DPP SC 01
A 102 01 DPP SC 01
A 122 01 DPP SC 01
25.40
31.75
38.10
15.88
19.05
22.20
24.60
30.60
36.80
10.30
13.00
16.00
5.70
7.10
8.25
1.50
2.00
3.15
1.50
2.00
3.15
11.56
14.48
17.96
3.96
5.08
5.93
31.00
38.80
49.14
33.58
41.21
51.27
10.90
13.40
15.50
9.90
12.50
14.00
12.70
16.90
20.70
0.93
1.39
2.25
53
ALUMINIUM GUIDE RAIL
SPROCKETS
Guide RailAssembly Part No. A B C F G H J K L M N Q R S
Avg. Wt.Per
Meter(Kg)
D E
A08A 01 DPS SC 01/GRLA1
A102 01 DPS SC 01/GRLA1
A122 01 DPS SC 01/GRLA1
63.00
78.00
95.00
66.00
80.00
91.00
44.50
55.50
72.50
35.25
41.75
51.25
18.50
23.00
23.50
11.00
13.00
13.00
34.90
43.00
50.50
11.40
14.30
17.20
12.10
15.00
18.00
13.50
16.50
19.50
13.60
17.50
17.50
8.50
10.50
10.50
7.50
9.00
9.00
6.50
8.50
8.50
10.50
13.50
13.50
5.30
7.50
7.50
3.30
4.70
5.73
Intl. Ref. No. TIDC Part No. Type OD T d HD L MAvg.
Wt/No(Kg)
No. OfTeeth
PD
C2040
C2050
C2060H
W-A 08A 01 DPS 010C
W-A 102 01 DPS 010C
W-A 122 01 DPS 010A
B
B
B
10
10
10
82.20
102.75
123.30
85.00
107.00
128.00
4.00
5.00
6.00
16.00
16.00
19.00
52.00
66.00
81.00
40.00
45.00
50.00
20.40
25.50
30.50
0.75
1.46
2.38
54
PLASTIC RETURN GUIDE
Intl. Ref. No. TIDC Part No. A D E R rAvg. Wt/No.
(Kg)B C
C2040 A08A 01 DPS SC 01-RG 50 12 30 8 30 60 52 0.12
Intl. Ref. No. TIDC Part No. A D E F G H R rB C
C2050
C2060 H
A102 01 DPS SC 01-RG
A122 01 DPS SC 01-RG
56
60
15
18
35
39
10.00
12.50
32
32
90.30
90.30
57
57
43
43
100
100
90.00
87.50
Avg. Wt/No.(Kg)
0.23
0.24
55
ALUMINIUM BRACKET
Intl. Ref. No. TIDC Part No. A D E F G T H1 H2B C
C2040
C2050
C2060 H
A08A 01 DPS SC 01-GB
A102 01 DPS SC 01-GB
A122 01 DPS SC 01-GB
60
76
94
15.00
20.50
27.50
30
35
39
44.50
55.50
72.50
7.70
10.20
10.70
20
24
24
30
35
35
3
4
4
8.50
10.50
10.50
8.50
8.50
8.50
Avg. Wt/No.(Kg)
0.045
0.050
0.062
Intl. Ref. No. TIDC Part No. A D E F GAvg. Wt/No.
(Kg)B C
C2040
C2050
A08A 01 DPS SC 01/TNUT
A102 01 DPS SC 01/TNUT
8.50
10.50
9.00
11.50
7.20
8.70
1.60X45°
1.60X45°
M6
M8
13.00
17.00
13.00
17.00
0.010
0.012
56
Intl. Ref. No. DIAMOND Chain Pitch CA B
35-1
40-1
50-1
60-1
B06A01PT01
D08A01PT01
D10201PT01
D12101PT01
9.525
12.70
15.875
19.05
7.95
9.17
11.60
13.80
19.00
23.25
28.60
34.50
12.54
15.30
19.10
22.30
PLASTIC TOP CHAINS
InternationalNumber
DIAMONDChain No.
Pitch Maximum allowable load(lbs)
35-1
40-1
50-1
B06A01PS01*
D08A01PS01
D10201PS01
9.525
12.70
15.875
40
99
154
POLY STEEL CHAINS
• Combination of steel base chain and plastic covers.• Offers the same allowable load as standard steel chain.• Even when they are placed directly on the chain itself, conveyed items are protected by the plastic covers.
• Poly Steel Chain is constructed with polyacetal inner links & high quality 304-grade stainless steel pins and side plate• Extremely lightweight, resistant in corrosion, and have the ability to run on ANSI Standard sprockets• Poly Steel Chain uses less energy and requires no maintenance throughout the chains life span
57
Note : Please select the required attachment plate and specify the frequency ofpositioning the attachments while ordering for chains.
SHARP TOP CHAINS
Sharp top chain is the best choice for thermoforming machine, steel and sawmill operations.
We provide a wide range of chain sizes and tooth configurations to cover different lumber processing applications
58
InternationalNumber
DIAMOND Attachment No.
Pitch A
08B-1
16B-1
D08301-Sharp top
D16001-Sharp top
12.70
25.40
14.20
25.83
InternationalNumber
DIAMOND Attachment No.
Pitch A
50-1 D10201-Sharp top 19.05 17.74
InternationalNumber
DIAMOND Attachment No.
Pitch A
80-1 D161-Sharp top (4 PEP) 25.40 28.00
InternationalNumber
DIAMOND Attachment No.
Pitch A
80-1 D161-Sharp top (5 PEP) 25.40 29.92
RUBBER TOP CHAINS
• These chains are designed to face special needs in wood, tile, glass, carton printing, PVC tube extrusion industries.• The rubber attachment can be supplied with precision single or duplex roller chains• Special Profiles can be made on request
59
63
SINTERED BUSH CHAINS
These chains are designed for clean environment applications where greasing is often not possible: like food processing, printing and pharmaceuticals. The bush has a unique powder alloy steel composition that allows it to be impregnated with a special oil. Offers a wear-life up to two times in excess of standard chains.
64
SELF LUBE CHAINS
DIAMOND MAX sintered bush chains are recommended for applications where lubrication is often not possible like food processing, printing, pharmaceuticals and electronics.
DIAMOND MAX SINTERED BUSH CHAINS
Intl. Ref.No.
DIAMONDChain No.
Pitch(P)
Plate Height(H)
(Max)
WidthOver
BearingPin(A)
BearingPin Dia
(d)(Max)
WidthOver JointFasteners
(B)(Max)
ProjectedBearing Area
Sq.cm
Avg.Weightper
Meter(Kg)
Widthbetween
InnerPlates
(w)(Min)
Roller Dia(D)
(Max)
08B-1
10B-1
12B-1
L083 01
L101 01
L120 01
12.70
15.875
19.05
7.75
9.65
11.68
8.51
10.16
12.07
12.40
14.70
16.10
17.00
19.60
22.70
4.45
5.08
5.72
20.90
23.70
27.30
0.50
0.69
0.92
0.70
0.88
1.10
TensileStrength
(Kgf)(Min)
1840
2290
2960
Note : Spares available for all models
65
“O” RING CHAINS
Diamond ‘O’ ring chains with unique design are engineered to offer superior resistance to wear.
Automotive ‘O’ Ring Chains
Other ‘O’ Ring Chains
Intl. Ref.No.
DIAMONDChain No.
Pitch(P)
IP Height(H1)
(Max)
OP Height(H2)
(Max)
IPThickness
(T1)(Max)
OPThickness
(T2)(Max)
WidthOver
BearingPin(A)
(Max)
BearingPin Dia
(d)(Max)
Widthbetween
InnerPlates
(w)(Min)
Roller Dia(D)
(Max)
J415 0R
J428 0R
J520 0R
D 087 01
D 089 01
D 105 01
12.70
12.70
15.875
5.15
7.95
6.35
7.75
8.51
10.16
10.57
11.56
14.48
10.57
10.57
13.51
1.37
1.58
2.00
1.37
1.50
2.00
15.10
19.00
20.57
4.07
4.50
5.07
WidthOver JointFasteners
(B)(Max)
16.24
20.30
22.04
Avg.Weightper
Meter(Kg)
0.476
0.693
0.944
TensileStrength
(Kgf)(Min)
1300
1845
2500
Intl. Ref.No.
DIAMONDChain No.
Pitch(P)
IP Height(H1)
(Max)
OP Height(H2)
(Max)
IPThickness
(T1)(Max)
OPThickness
(T2)(Max)
WidthOver
BearingPin(A)
(Max)
BearingPin Dia
(d)(Max)
Widthbetween
InnerPlates
(w)(Min)
Roller Dia(D)
(Max)
08B 0R
10B 0R
D 083 01
D 101 01
12.70
15.875
7.75
9.65
8.51
10.16
11.56
14.48
10.57
13.51
1.58
1.58
1.50
1.58
19.00
21.94
4.45
5.06
WidthOver JointFasteners
(B)(Max)
20.30
23.53
Avg.Weightper
Meter(Kg)
0.693
0.921
TensileStrength
(Kgf)(Min)
1845
2265
66
British & American Standard
DIAMOND DELTA
* Multistrand chains available based on request.
Delta (∆) pins have the following advantages over standard case hardened pin chain: • Improved resistance to corrosion in wet and humid conditions. • Greatly increased resistance to wear and elongation.The Delta (∆) treatment, now supported by many years of experience, has consistently provided an increase in chain life in a wide range of applications.
N SERIESR SERIES
ANSINo.
TIDC ChainNo.
No.Of
Strands
RollerDia(D)
(Max)
PlateThickness
(T)
PlateHeight
(H)(Max)
BearingPinDia(d)
(Max)
Width OverBearing
Pin(A)
(Max)
Width OverBearing
Pin(A)
(Max)
Pitch(P)
WidthBetween
InnerPlates
(W)(Min)
60
80
100
R121/N121
R161/N161
R201/N201
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
19.05
25.40
31.75
12.58
15.75
18.90
11.91
15.88
19.05
2.39
3.18
3.96
18.10
24.13
30.17
5.96
7.94
9.54
26.80
49.60
72.40
95.20
117.90
140.80
163.50
186.30
34.00
63.30
92.60
121.90
151.20
180.40
209.70
239.00
41.20
76.90
112.70
148.50
184.20
220.00
255.80
291.50
32.76
49.60
72.40
95.20
122.10
145.54
167.70
191.10
39.10
68.40
97.70
127.00
156.30
185.50
214.80
244.10
47.10
82.80
118.60
154.40
190.10
225.90
261.70
297.40
TransversePitch(P1)
22.78
22.78
22.78
22.78
22.78
22.78
22.78
29.29
29.29
29.29
29.29
29.29
29.29
29.29
35.76
35.76
35.76
35.76
35.76
35.76
35.76
TensilePitch(KN)(Min)
31.27
62.54
93.81
125.08
156.35
187.62
218.89
250.16
55.60
111.20
166.80
222.40
278.00
333.60
389.20
444.80
86.87
173.74
260.61
347.48
343.35
521.22
608.09
694.96
Spares
A,B,C
A,B,C
A,B,C
OIL FIELD CHAINS
Regular Series
67
Note : Spares available for all models.
OIL FIELD CHAINS
68
ANSINo.
TIDC ChainNo.
No.Of
Strands
RollerDia(D)
(Max)
PlateThickness
(T)
PlateHeight
(H)(Max)
BearingPinDia(d)
(Max)
Width OverBearing
Pin(A)
(Max)
Width OverBearing
Pin(A)
(Max)
Pitch(P)
WidthBetween
InnerPlates
(W)(Min)
TransversePitch(P1)
TensilePitch(KN)(Min)
Spares
120
140
160
200
240
R241/N241
R281/N281
R321/N321
R401/N401
R481/N481
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
1
2
3
1
2
3
38.10
44.45
50.80
63.50
76.20
25.23
25.23
31.55
37.85
47.35
22.23
25.40
28.58
39.68
47.63
4.75
5.56
6.35
7.92
9.53
36.20
42.23
48.23
60.33
72.39
11.11
12.71
14.29
19.85
23.81
51.50
97.00
142.40
187.80
233.30
278.70
324.10
369.60
55.60
104.50
153.40
202.20
251.10
300.00
348.80
397.70
66.00
124.50
183.10
241.60
300.20
358.70
417.30
475.80
80.30
151.90
223.40
97.90
185.80
273.60
58.30
103.80
149.20
194.60
240.10
285.50
330.90
376.40
63.30
112.20
161.10
209.90
258.80
307.70
356.50
405.40
74.50
133.00
191.60
250.10
308.70
367.20
425.80
484.30
90.50
162.10
233.60
109.80
197.70
285.50
45.44
45.44
45.44
45.44
45.44
45.44
45.44
48.87
48.87
48.87
48.87
48.87
48.87
48.87
58.55
58.55
58.55
58.55
58.55
58.55
58.55
71.55
71.55
87.83
87.83
125.10
250.20
375.30
500.40
625.50
750.60
875.70
1000.80
170.27
340.54
510.81
681.08
851.35
1021.62
1191.89
1362.16
222.40
444.80
667.20
889.60
1112.00
1334.40
1556.80
1779.20
347.50
695.00
1042.50
529.40
1058.80
1588.20
A,B,C
A,B,C
A,B,C
A,B,C
A,B,C
OIL FIELD CHAINS
Heavy SeriesANSI.No.
TIDC ChainNo.
NoOf
Strands
RollerDia(D)
(Max)
PlateThickness
(T)
PlateHeight
(H)(Max)
BearingPinDia(d)
(Max)
Width OverBearing
Pin(A)
(Max)
Width OverBearing
Pin(A)
(Max)
Pitch(P)
WidthBetween
InnerPlates
(W)(Min)
60H
80H
100H
120H
140H
160H
200H
240H
R122/N122
R162/N162
R202/N202
R242/N242
R282/N282
R322/N322
R402/N402
R482/N482
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
19.05
25.40
31.75
38.10
44.45
50.80
63.50
76.20
12.58
15.75
18.90
25.23
25.23
31.55
37.85
47.35
11.91
15.88
19.05
22.23
25.40
28.58
39.68
47.63
3.18
3.96
4.75
5.56
6.35
7.14
9.53
12.70
18.10
24.13
30.17
36.20
42.23
48.26
60.33
72.39
5.96
7.94
9.54
11.11
12.71
14.29
19.85
23.81
30.20
56.30
82.40
37.30
69.90
102.50
44.50
83.60
122.70
54.90
103.80
152.70
58.90
111.10
163.30
69.30
131.20
193.10
87.10
165.40
243.70
111.30
212.50
313.80
34.40
60.50
86.60
42.40
75.00
107.60
50.40
89.50
128.60
61.70
110.60
159.50
66.60
118.80
171.00
77.80
139.70
201.60
97.30
175.60
253.90
123.20
224.40
325.70
TransversePitch(P1)
26.11
26.11
32.59
32.59
39.09
39.09
48.87
48.87
52.20
52.20
61.90
61.90
78.31
78.31
101.22
101.22
TensilePitch(KN)(Min)
31.27
62.54
93.81
55.60
111.20
166.80
86.84
173.74
260.61
125.10
250.20
375.30
170.27
340.54
510.81
222.40
44.80
667.20
347.50
695.00
1042.50
529.40
1058.80
1588.20
Spares
A,B,C
A,B,C
A,B,C
A,B,C
A,B,C
A,B,C
A,B,C
A,B,C
69
MATCH INDUSTRY PIN OVEN CHAIN
LEAF CHAIN WITH PLASTIC GUIDE LIGHTING INDUSTRY
GRIPPER CHAINS STENTOR CHAIN
WORK STANDARD SPECIAL CHAINS
Note : Straight side Plate Stainless Steel Chains are also available.Spares available for all models.
CORROSION RESISTANT CHAINS
Stainless steel (SS 304) chains with solid rollers are designed to offer excellent corrosion resistance and are used in atmosphere where chains are exposed to chemical, water and heat. They can operate in a temperature range of -20 deg c to 400 deg c
*Straight Contour
Single Strand
Double Strand
Triple Strand
STAINLESS STEEL CHAINS -EUROPEAN SERIES
Intl.Ref. No.
DIAMONDChain No.
Pitch(P)
PlateHeight
(H)(Max)
BearingPin Dia
(d)(Max)
Width OverBearing
Pin(A)
WidthOver Joint Fasteners
(B)(Max)
TransversePitch(P1)
ProjectedBearing
Area(Sq.cm)
Avg.Weightper
Meter(Kg)
Widthbetween
Inner Plates(w)
(Min)
RollerDia(D)
(Max)
05B-1
06B-1*
08B-1
10B-1
12B-1
16B-1
D05B01SS01
D06101SS01
D08301SS01
D10101SS01
D12001SS01
D16001SS01
8.00
9.525
12.70
15.875
19.05
25.40
3.00
5.72
7.75
9.65
11.68
17.02
5.00
6.35
8.51
10.16
12.07
15.88
7.10
8.20
11.80
14.70
16.10
21.00
2.31
3.28
4.45
5.08
5.72
8.27
8.60
13.50
17.00
19.60
22.70
36.10
11.70
16.80
20.90
23.70
27.30
41.50
-
-
-
-
-
-
0.11
0.28
0.50
0.67
0.88
2.07
0.39
0.44
0.70
0.92
1.12
2.59
TensileStrength
(Kgf)(Min)
300
650
1200
1450
1700
4000
06B-2*
08B-2
10b-2
12B-2
16B-2
D06102SS01
D08302SS01
D10102SS01
D12002SS01
D16002SS01
9.525
12.00
15.875
19.05
25.40
5.72
7.75
9.65
11.68
17.02
6.35
8.51
10.61
12.07
15.88
8.20
11.80
14.70
16.10
21.00
3.28
4.45
5.08
5.72
8.27
23.80
31.00
36.20
42.20
68.00
27.10
34.90
40.30
46.80
73.40
10.24
13.92
16.59
19.46
31.88
0.56
1.00
1.34
1.76
4.14
0.74
1.40
3.00
2.21
5.08
1000
2160
2900
3800
7590
06B-3*
08B-3
10B-3
12B-3
16B-3
D06103SS01
D08303SS01
D10103SS01
D12003SS01
D16003SS01
9.525
12.70
15.875
19.05
25.40
5.72
7.75
9.65
11.68
17.02
6.35
8.51
10.61
12.07
15.88
8.20
11.80
14.70
16.10
21.00
3.28
4.45
5.08
5.72
8.27
34.00
44.90
52.80
61.70
99.90
37.30
48.80
56.90
66.30
105.30
10.24
13.92
16.59
19.46
31.88
0.84
1.00
1.34
1.76
4.14
1.11
1.31
1.79
2.22
5.03
1820
3600
4300
5100
11900
72
CORROSION RESISTANT CHAINS
Single Strand
Double Strand
Triple Strand
Note : Spares available for all models.
STAINLESS STEEL CHAINS -AMERICAN SERIES
Intl.Ref.No.
DIAMONDChain No.
Pitch(P)
Plate Height Plate Thickness
IP (H1)
OP(H2)
IP(T1)
OP(T2)
BearingPin Dia
(d)(Max)
Width OverBearing
Pin(A)
WidthOverJoint
Fasteners(B)
(Max)
Widthbetween
InnerPlates
(w)(Min)
RollerDia(D)
(Max)
35-1
40-1
50-1
60-1
80-1
B 06A 01 SS 01
D 08A 01 SS 01
D 102 01 SS 01
D 121 01 SS 01
D 161 01 SS 01
9.525
12.70
15.875
19.05
25.40
4.68
7.85
9.40
12.58
15.75
5.08
7.92
10.16
11.91
15.88
8.65
12.00
15.00
18.00
24.10
7.48
10.40
13.00
16.60
20.80
1.25
1.50
2.00
2.40
3.00
1.25
1.50
2.00
2.40
3.00
3.59
3.96
5.08
5.94
7.92
12.18
17.80
21.80
26.90
33.50
13.18
21.80
25.90
31.50
38.90
0.27
0.44
0.71
1.04
1.77
0.33
0.63
1.04
1.53
2.59
570
1045
1710
2280
3700
TransversePitch(P1)
ProjectedBearing
Area(Sq.cm)
Avg.Weight
perMeter(Kg)
TensileStrength
(Kgf)(Min)
-
-
-
-
-
40-2
50-2
60-2
80-2
D 08A 02 SS 01
D 102 02 SS 01
D 121 02 SS 01
D 161 02 SS 01
12.70
15.875
19.05
25.40
7.85
9.40
12.58
15.75
7.92
10.16
11.91
15.88
12.00
15.00
18.00
24.10
10.40
13.00
16.60
20.80
1.50
2.00
2.40
3.00
1.50
2.00
2.40
3.00
3.96
5.08
5.94
7.92
32.30
37.90
49.80
62.70
36.20
44.00
54.40
68.10
0.88
1.42
2.08
3.54
1.25
2.05
3.01
4.17
2090
3420
4560
7400
14.38
18.11
22.78
29.29
40-3
50-3
60-3
80-3
D 08A 03 SS 01
D 102 03 SS 01
D 121 03 SS 01
D 161 03 SS 01
12.70
15.875
19.05
25.40
7.85
9.40
12.58
15.75
7.92
10.16
11.91
15.88
12.00
15.00
18.00
24.10
10.40
13.00
16.60
20.80
1.50
2.00
2.40
3.00
1.50
2.00
2.40
3.00
3.96
5.08
5.94
7.92
45.30
56.80
72.60
91.90
49.20
60.90
77.20
97.10
1.32
2.13
3.12
5.31
1.90
3.12
4.58
6.04
3300
5200
7500
12500
14.38
18.11
22.78
29.29
73
CORROSION RESISTANT CHAINS
Note : Spares available for all models.
STAINLESS STEEL CHAINSDOUBLE PITCH - EUROPEAN SERIES
STAINLESS STEEL CHAINSDOUBLE PITCH - AMERICAN SERIES
208b-SS
210B-SS
212B-SS
216B-SS
E08301SS01
E10101SS01
E12001SS01
E16001SS01
25.40
31.75
38.10
50.80
7.75
9.65
11.68
17.02
8.51
10.16
12.01
15.88
11.66
13.90
15.30
20.65
4.45
5.08
5.72
8.27
17.00
19.60
22.70
36.10
20.90
23.70
27.30
41.50
0.48
0.69
0.72
1.30
1200
1450
1700
4000
Intl.Ref. No.
DIAMONDChain No.
Pitch(P)
Widthbetween
Inner Plates(w)
(Min)
RollerDia(D)
(Max)
PlateHeight
(H)(Max)
BearingPin Dia
(d)(Max)
Width OverBearing
Pin(A)
WidthOver Joint Fasteners
(B)(Max)
Avg.Weightper Meter
(Kg)
TensileStrength
(Kgf)(Min)
A 2040
A 2050
A 2060
A 2080
E08A 01 SS 01
E102 01 SS 01
E121 01 SS 01
E161 01 SS 01
25.40
31.75
38.10
50.80
7.85
9.40
12.58
15.75
7.92
10.16
11.91
15.88
11.66
13.90
18.18
24.10
3.96
5.08
5.94
7.92
17.80
21.80
26.90
33.50
21.80
25.90
31.50
38.90
0.41
0.66
1.03
1.62
1045
1710
2280
3700
Intl.Ref. No.
DIAMONDChain No.
Pitch(P)
Widthbetween
Inner Plates(w)
(Min)
RollerDia(D)
(Max)
PlateHeight
(H)(Max)
BearingPin Dia
(d)(Max)
Width OverBearing
Pin(A)
WidthOver Joint Fasteners
(B)(Max)
Avg.Weightper Meter
(Kg)
TensileStrength
(Kgf)(Min)
74
Note : Spares available for all models.
CORROSION RESISTANT CHAINS
STAINLESS STEEL CHAINS DOUBLE PITCH -AMERICAN SERIES - CONVEYOR
Intl.Ref.No.
DIAMONDChain No.
Pitch(P)
PlateHeight
(H)(Max)
PlateThickness
(T)
BearingPin Dia
(D)(Max)
Width OverBearing
Pin(A)
Width OverJoint
Fasteners(B)
(Max)
Widthbetween
InnerPlates
(w)(Min)
RollerDia(D)
(Max)
C2040
C2042
C2050
C2052
C2060
C2062
C2080
C2082
A 08A 01 SS 01
A 08A 02 SS 01
A 102 02 SS 01
A 102 02 SS 01
A 121 01 SS 01
A 121 02 SS 01
A 161 01 SS 01
A 161 02 SS 01
25.40
31.75
38.10
50.80
7.85
9.40
12.58
15.75
7.92
15.88
10.16
19.05
11.91
22.22
15.88
28.58
11.66
14.58
18.06
24.05
1.50
2.00
2.40
3.00
3.96
5.08
5.94
7.92
17.80
20.80
26.90
33.50
21.80
25.90
31.50
38.90
0.48
0.82
0.82
1.26
1.03
1.47
2.00
3.03
1045
1710
2280
3700
ProjectedBearing
Area(Sq.cm)
Avg.Weightper
Meter(Kg)
TensileStrength
(Kgf)(Min)
0.44
0.71
1.04
1.77
75
83Note : Spares available for all models.
COATED CHAINS
ZAC chains are built to provide outstanding corrosion resistance, with the same strength and breaking load values of standard chains. A special coating fights corrosion in the most aggressive environments. ZAC chain superiority has been proven against Nickel, Zinc and other plated chains.
76
Chain is suitable for wet conditions and therefore can be used in outdoors. It has an extremely long working life due to the anti-corrosion coating. All chain parts have been coated with anti-corrosion substance which makes the resistance intact for over 1000 hours. Applications: Material Handling, Food & Beverage, Automotive and Wood
CORROSION RESISTANT CHAINS
Also available with straight side plates and in Double, Triple strands.
Nickel Plated Chains: These chains are ideal for use in light corrosive atmosphere or where good appearance is required.
Zinc Plated Chains: These chains are used in corrosive atmosphere and outdoor applications. ZAC Chains: Excellent corrosion resistance with same strength and breaking load values as standard chains. The chains are designed to withstand a minimum of 250 hrs of salt spray testing as per ASTM B 117.
* Double Pitch Zinc Plated Chains
Note:NP - Nickel PlatedZP - Zinc PlatedZAC - Special Coating for High Corrosion Resistance
PLATED CHAINS -EUROPEAN SERIES
Intl.Ref.No.
Pitch(P)
Widthbetween
Inner Plates(w)
(Min)
BearingPinDia(d)
(Max)
Width OverBearing
Pin(A)
WidthOver Joint Fasteners
(B)(Max)
ProjectedBearing
Area(Sq.cm)
Avg.Weightper
Meter(Kg)
RollerDia(D)
(Max)
PlateHeight
(H)(Max)
04B-1
05B-1
06B-1
08B-1
10B-1
12B-1
16B-1
6.00
8.00
9.525
12.70
15.875
19.05
25.40
2.80
3.00
5.72
7.75
9.65
11.68
17.02
4.00
5.00
6.35
8.51
10.16
12.07
15.88
5.00
7.10
8.20
11.80
14.70
16.10
21.00
1.85
2.31
3.28
4.45
5.08
5.72
8.27
7.40
8.60
13.50
17.00
19.60
22.70
36.10
10.30
11.70
16.80
20.90
23.70
27.30
41.50
0.08
0.11
0.28
0.50
0.67
0.88
2.07
0.12
0.18
0.40
0.68
0.91
1.12
2.59
260
430
780
1560
1940
2510
5200
300
510
920
1840
2290
2960
6120
NP ZP
Tensile Strength(Kgf)(Min)
ZAC
300
510
920
1840
2290
2960
6120
77
CORROSION RESISTANT CHAINS
Also available with straight side plates and in Double, Triple strands.
Nickel Plated Chains: These chains are ideal for use in light corrosive atmosphere or where good appearance is required.
Zinc Plated Chains: These chains are used in corrosive atmosphere and outdoor applications.
ZAC Chains: Excellent corrosion resistance with same strength and breaking load values as standard chains. The chains are designed to withstand a minimum of 250 hrs of salt spray testing as per ASTM B 117.
Note:NP - Nickel PlatedZP - Zinc PlatedZAC - Special Coating for High Corrosion Resistance
PLATED CHAINS -AMERICAN SERIES
78
LEAF CHAINS
The BL series leaf chains are designed for medium loads and greater shocks for applications in lift trucks, masts, construction and mining.
ISO 4347 / DIN 8152 / ANSI B29.8
BL SERIES
BL 422
BL 423
BL 434
BL 444
BL 446
BL 466
BL 488
BL 522
BL 523
BL 534
BL 544
BL 546
BL 566
BL 588
BL 622
BL 623
BL 634
BL 644
BL 646
BL 666
BL 688
BL 822
BL 823
BL 834
BL 08 22
BL 08 23
BL 08 34
BL 08 44
BL 08 46
BL 08 66
BL 08 88
BL 10 22
BL 10 23
BL 10 34
BL 10 44
BL 10 46
BL 10 66
BL 10 88
BL 12 22
BL 12 23
BL 12 34
BL 12 44
BL 12 46
BL 12 66
BL 12 88
BL 16 22
BL 16 23
BL 16 34
2 × 2
2 × 3
3 × 4
4 × 4
4 × 6
6 × 6
8 × 8
2 × 2
2 × 3
3 × 4
4 × 4
4 × 6
6 × 6
8 × 8
2 × 2
2 × 3
3 × 4
4 × 4
4 × 6
6 × 6
8 × 8
2 × 2
2 × 3
3 × 4
12.70
15.875
19.05
25.40
5.09
5.96
7.94
9.54
12.07
15.90
18.10
24.10
5.12
5.98
7.96
9.56
2.08
2.44
3.30
4.09
11.00
13.10
17.40
19.50
23.75
27.99
36.40
12.88
15.30
20.30
22.70
27.70
32.10
42.50
17.30
20.40
27.40
30.70
37.40
44.20
57.60
21.30
25.40
33.70
0.59
0.75
1.03
1.16
1.47
1.72
2.29
0.86
1.09
1.50
1.68
2.15
2.51
3.33
1.39
1.76
2.43
2.72
3.46
4.05
5.38
2.43
3.09
4.26
2270
2270
3400
4540
4540
6800
9080
3400
3400
4990
6800
6800
12010
13600
4990
4990
7720
9980
9980
14970
19950
8620
8620
13160
Intl.Ref.No.
DiamondChain no.
lacingPtattern
Pitch(P)
Oin Data(d)
(Max)
Plate Height(H)
(max)
Hole Dia(D)
PlateThickness
(T)(Max)
Width OverBearing Pin
(A)(Max)
AverageWeight
Per Meter(Kg)
TensileStrength
(Kgf)(Min)
80
LEAF CHAINS
BL 844
BL 846
BL 866
BL 888
BL 1022
BL 1023
BL 1034
BL 1044
BL 1046
BL 1066
BL 1088
BL 1222
BL 1223
BL 1234
BL 1244
BL 1246
BL 1266
BL 1288
BL 1422
BL 1423
BL 1434
BL 1444
BL 1446
BL 1466
BL 1488
BL 1622
BL 1623
BL 1634
BL 1644
BL 1646
BL 1666
BL 1688
BL 2022
BL 2023
BL 2034
BL 2044
BL 2046
BL 2066
BL 2088
BL 16 44
BL 16 46
BL 16 66
BL 16 88
BL 20 22
BL 20 23
BL 20 34
BL 20 44
BL 20 46
BL 20 66
BL 20 88
BL 24 22
BL 24 23
BL 24 34
BL 24 44
BL 24 46
BL 24 66
BL 24 88
BL 28 22
BL 28 23
BL 28 34
BL 28 44
BL 28 46
BL 28 66
BL 28 88
BL 32 22
BL 32 23
BL 32 34
BL 32 44
BL 32 46
BL 32 66
BL 32 88
BL 40 22
BL 40 23
BL 40 34
BL 40 44
BL 40 46
BL 40 66
BL 40 88
4 × 4
4 × 6
6 × 6
8 × 8
2 × 2
2 × 3
3 × 4
4 × 4
4 × 6
6 × 6
8 × 8
2 × 2
2 × 3
3 × 4
4 × 4
4 × 6
6 × 6
8 × 8
2 × 2
2 × 3
3 × 4
4 × 4
4 × 6
6 × 6
8 × 8
2 × 2
2 × 3
3 × 4
4 × 4
4 × 6
6 × 6
8 × 8
2 × 2
2 × 3
3 × 4
4 × 4
4 × 6
6 × 6
8 × 8
25.40
31.75
38.10
44.45
50.80
63.50
9.54
11.11
12.70
14.29
17.46
23.80
24.10
30.18
36.20
42.20
48.26
60.30
9.56
11.14
12.74
14.31
17.49
23.84
4.09
4.90
5.77
6.55
7.52
9.91
37.90
46.10
54.40
71.00
25.30
30.30
40.20
45.10
55.00
65.00
84.80
29.60
35.40
47.00
52.80
64.50
76.10
99.40
33.50
40.10
53.30
59.50
73.10
86.30
112.30
39.00
46.50
61.70
69.20
84.40
99.50
129.80
51.70
61.70
81.60
91.50
111.40
131.30
171.20
4.78
6.10
7.13
9.47
3.41
4.23
5.85
6.89
8.29
9.92
13.92
5.00
6.22
8.62
9.84
12.26
14.50
19.54
6.32
7.91
11.10
12.62
16.69
20.00
25.28
8.72
12.68
15.09
17.81
21.46
25.71
39.89
15.80
19.80
27.70
31.60
39.50
47.40
63.20
17240
17240
25860
34470
11790
11790
18630
23580
23580
35370
47170
15430
15430
24960
30860
30860
46280
61720
19500
19500
32200
39000
39000
58960
78010
29480
29480
44900
58960
58960
88440
117910
44225
44225
66220
88450
88450
132675
176800
Intl.Ref.No.
DiamondChain no.
lacingPattern
Pitch(P)
Oin Data(d)
(Max)
Plate Height(H)
(max)
Hole Dia(D)
PlateThickness
(T)(Max)
Width OverBearing Pin
(A)(Max)
AverageWeight
Per Meter(Kg)
TensileStrength
(Kgf)(Min)
81
LEAF CHAINS
Superior plate geometry to withstand higher loads, superior hole preparation for better bearing contact with high tensile pins, just some of the characteristics that make these chains strong enough to exceed ISO, ANSI and other international specifications.
82
BL 422
BL 423
BL 434
BL 444
BL 446
BL 466
BL 488
BL 522
BL 523
BL 534
BL 544
BL 546
BL 566
BL 588
BL 622
BL 623
BL 634
BL 644
BL 646
BL 666
BL 688
BL 822
BL 823
BL 834
BL 844
BL 846
BL 866
BL 888
Q - BL 08 22
Q - BL 08 23
Q - BL 08 34
Q - BL 08 44
Q - BL 08 46
Q - BL 08 66
Q - BL 08 88
Q - BL 10 22
Q - BL 10 23
Q - BL 10 34
Q - BL 10 44
Q - BL 10 46
Q - BL 10 66
Q - BL 10 88
Q - BL 12 22
Q - BL 12 23
Q - BL 12 34
Q - BL 12 44
Q - BL 12 46
Q - BL 12 66
Q - BL 12 88
Q - BL 16 22
Q - BL 16 23
Q - BL 16 34
Q - BL 16 44
Q - BL 16 46
Q - BL 16 66
Q - BL 16 88
2 × 2
2 × 3
3 × 4
4 × 4
4 × 6
6 × 6
8 × 8
2 × 2
2 × 3
3 × 4
4 × 4
4 × 6
6 × 6
8 × 8
2 × 2
2 × 3
3 × 4
4 × 4
4 × 6
6 × 6
8 × 8
2 × 2
2 × 3
3 × 4
4 × 4
4 × 6
6 × 6
8 × 8
12.70
15.875
19.05
25.40
5.09
5.96
7.94
9.54
12.07
15.90
18.10
24.10
5.12
5.98
7.96
9.56
2.08
2.44
3.30
4.09
11.00
13.10
17.40
19.50
23.75
27.99
36.40
12.88
15.30
20.30
22.70
27.70
32.10
42.50
17.30
20.40
27.40
30.70
37.40
44.20
57.60
21.30
25.40
33.70
37.90
46.10
54.40
71.00
0.67
0.77
1.07
1.21
1.51
1.81
2.41
0.90
1.11
1.53
1.75
2.17
2.60
3.44
1.47
1.81
2.50
2.85
3.55
4.29
5.63
2.50
3.10
4.30
4.90
6.09
7.29
9.69
2800
2800
4200
5700
5700
8500
11400
4000
4000
6100
8100
8100
12200
16300
7000
7000
10500
14000
14000
21000
28000
9975
9975
15800
21070
21070
29720
39900
Intl.Ref.No.
DiamondChain no.
lacingPattern
Pitch(P)
Oin Data(d)
(Max)
Plate Height(H)
(max)
Hole Dia(D)
PlateThickness
(T)(Max)
Width OverBearing Pin
(A)(Max)
AverageWeight
Per Meter(Kg)
TensileStrength
(Kgf)(Min)
LEAF CHAINS
ISO 4347 / DIN 8152 / ANSI B29.8
DIAMOND MAX - BL SERIES
83
LEAF CHAINS
ISO 4347 / DIN 8152 / ANSI B29.8
AL 08 22
AL 08 23
AL 08 34
AL 08 44
AL 08 46
AL 08 66
AL 08 88
AL 10 22
AL 10 23
AL 10 34
AL 10 44
AL 10 46
AL 10 66
AL 10 88
AL 12 22
AL 12 23
AL 12 34
AL 12 44
AL 12 46
AL 12 66
AL 12 88
2 × 2
2 × 3
3 × 4
4 × 4
4 × 6
6 × 6
8 × 8
2 × 2
2 × 3
3 × 4
4 × 4
4 × 6
6 × 6
8 × 8
2 × 2
2 × 3
3 × 4
4 × 4
4 × 6
6 × 6
8 × 8
12.70
15.875
19.05
3.98
5.09
5.96
12.07
15.09
18.10
4.01
5.12
5.98
1.61
2.08
2.44
8.60
10.20
13.40
15.00
18.20
21.40
27.80
10.85
13.00
17.20
19.35
23.60
27.80
36.35
12.70
15.20
20.15
22.65
27.60
32.55
42.55
0.36
0.46
0.64
0.74
0.93
1.10
1.52
0.65
0.82
1.11
1.28
1.63
1.90
2.60
0.91
1.13
1.65
1.79
1.89
2.66
3.53
1410
1410
2115
2820
2820
4230
5640
2700
2700
4050
5400
5400
8100
10800
3180
3180
4770
6360
6360
9540
12720
DiamondChain no.
lacingPattern
Pitch(P)
Oin Data(d)
(Max)
Plate Height(H)
(max)
Hole Dia(D)
PlateThickness
(T)(Max)
Width OverBearing Pin
(A)(Max)
AverageWeight
Per Meter(Kg)
TensileStrength
(Kgf)(Min)
The AL series of leaf chains are used for light duty applications with relatively constant, low loads.
AL SERIES
84
LEAF CHAINS
Note : Connecting links & clevis pins are also available.
AL 16 22
AL 16 23
AL 16 34
AL 16 44
AL 16 46
AL 16 66
AL 16 88
AL 20 22
AL 20 23
AL 20 34
AL 20 44
AL 20 46
AL 20 66
AL 20 88
AL 24 22
AL 24 23
AL 24 34
AL 24 44
AL 24 46
AL 24 66
AL 28 22
AL 28 23
AL 28 34
AL 28 44
AL 28 46
AL 28 66
AL 32 22
AL 32 23
AL 32 34
AL 32 44
AL 32 46
AL 32 66
2 × 2
2 × 3
3 × 4
4 × 4
4 × 6
6 × 6
8 × 8
2 × 2
2 × 3
3 × 4
4 × 4
4 × 6
6 × 6
8 × 8
2 × 2
2 × 3
3 × 4
4 × 4
4 × 6
6 × 6
2 × 2
2 × 3
3 × 4
4 × 4
4 × 6
6 × 6
2 × 2
2 × 3
3 × 4
4 × 4
4 × 6
6 × 6
25.40
31.75
38.10
44.45
50.80
7.94
9.54
11.11
12.70
14.29
24.10
30.18
36.20
36.20
42.20
7.36
9.56
11.14
12.74
14.31
3.30
4.09
4.90
5.77
6.55
16.60
19.75
26.05
29.05
35.50
41.90
54.70
21.30
25.50
33.70
37.90
46.10
54.40
72.00
24.15
28.90
38.40
43.15
52.65
64.37
28.90
34.70
46.40
52.20
63.85
75.50
32.40
39.00
52.25
58.90
72.10
85.35
1.45
1.85
2.57
2.85
3.65
4.24
5.80
2.31
2.97
4.13
4.54
5.86
6.77
9.24
3.42
4.52
5.91
6.74
8.40
9.71
4.79
5.95
8.28
9.45
11.78
14.11
6.00
7.56
10.53
11.95
14.98
17.95
5670
5670
8510
11340
11340
17010
22680
9500
9500
14250
19000
19000
28500
36100
13560
13560
20340
27120
27120
40680
17740
17740
29610
35480
35480
53220
23000
23000
34500
46000
46000
69000
DiamondChain no.
lacingPattern
Pitch(P)
Oin Data(d)
(Max)
Plate Height(H)
(max)
Hole Dia(D)
PlateThickness
(T)(Max)
Width OverBearing Pin
(A)(Max)
AverageWeight
Per Meter(Kg)
TensileStrength
(Kgf)(Min)
85
LEAF CHAINS
ISO 4347
LL 08 22
LL 08 23
LL 08 34
LL 08 44
LL 08 46
LL 08 66
LL 08 88
LL 10 22
LL 10 23
LL 10 34
LL 10 44
LL 10 46
LL 10 66
LL 10 88
LL 12 22
LL 12 23
LL 12 34
LL 12 44
LL 12 46
LL 12 66
LL 12 88
LL 08 22
LL 08 23
LL 08 34
LL 08 44
LL 08 46
LL 08 66
LL 08 88
LL 10 22
LL 10 23
LL 10 34
LL 10 44
LL 10 46
LL 10 66
LL 10 88
LL 12 22
LL 12 23
LL 12 34
LL 12 44
LL 12 46
LL 12 66
LL 12 88
2 × 2
2 × 3
3 × 4
4 × 4
4 × 6
6 × 6
8 × 8
2 × 2
2 × 3
3 × 4
4 × 4
4 × 6
6 × 6
8 × 8
2 × 2
2 × 3
3 × 4
4 × 4
4 × 6
6 × 6
8 × 8
12.70
15.875
19.05
4.45
5.08
5.72
10.90
13.70
16.10
4.46
5.09
5.73
1.30
1.65
1.90
7.60
8.95
11.65
13.00
15.70
18.40
23.80
9.30
11.00
14.40
16.10
19.50
22.90
29.70
10.70
12.65
16.55
18.50
22.40
26.30
34.10
0.36
0.42
0.58
0.67
0.82
0.97
1.34
0.31
0.37
0.53
0.60
0.75
0.89
1.20
0.35
0.43
0.58
0.66
0.82
0.98
1.30
1810
1810
2715
3620
3620
5430
7240
2220
2220
3400
4450
4540
6670
8880
2890
2890
4425
5780
5900
8670
11560
Intl.Ref.No.
DiamondChain no.
lacingPattern
Pitch(P)
Oin Data(d)
(Max)
Plate Height(H)
(max)
Hole Dia(D)
PlateThickness
(T)(Max)
Width OverBearing Pin
(A)(Max)
AverageWeight
Per Meter(Kg)
TensileStrength
(Kgf)(Min)
The LL series leaf chains are derived from European series chains and used in various lifting applications including lift trucks, masts and counter weights.
LL STANDARD SERIES
86
Note : Connecting links & clevis pins are also available.
LEAF CHAINS
LL 16 22
LL 16 23
LL 16 34
LL 16 44
LL 16 46
LL 16 66
LL 16 88
LL 20 22
LL 20 23
LL 20 34
LL 20 44
LL 20 46
LL 20 66
LL 20 88
LL 24 22
LL 24 23
LL 24 34
LL 24 44
LL 24 46
LL 24 66
LL 24 88
LL 28 22
LL 28 23
LL 28 34
LL 28 44
LL 28 46
LL 28 66
LL 32 22
LL 32 23
LL 32 34
LL 32 44
LL 32 46
LL 32 66t
LL 16 22
LL 16 23
LL 16 34
LL 16 44
LL 16 46
LL 16 66
LL 16 88
LL 20 22
LL 20 23
LL 20 34
LL 20 44
LL 20 46
LL 20 66
LL 20 88
LL 24 22
LL 24 23
LL 24 34
LL 24 44
LL 24 46
LL 24 66
LL 24 88
LL 28 22
LL 28 23
LL 28 34
LL 28 44
LL 28 46
LL 28 66
LL 32 22
LL 32 23
LL 32 34
LL 32 44
LL 32 46
LL 32 66
2 × 2
2 × 3
3 × 4
4 × 4
4 × 6
6 × 6
8 × 8
2 × 2
2 × 3
3 × 4
4 × 4
4 × 6
6 × 6
8 × 8
2 × 2
2 × 3
3 × 4
4 × 4
4 × 6
6 × 6
8 × 8
2 × 2
2 × 3
3 × 4
4 × 4
4 × 6
6 × 6
2 × 2
2 × 3
3 × 4
4 × 4
4 × 6
6 × 6
25.40
31.75
38.10
44.45
50.80
8.28
10.19
14.63
15.90
17.81
21.08
26.40
33.40
37.08
42.29
8.30
10.21
14.65
15.92
17.53
3.20
3.70
5.20
6.45
6.45
17.20
20.45
26.93
30.20
36.70
43.20
56.20
20.10
23.10
30.45
35.10
41.40
50.10
65.10
28.40
31.75
42.30
49.40
58.10
70.10
91.40
34.00
37.00
49.50
60.00
68.35
86.00
35.00
37.65
50.20
61.00
69.00
87.00
1.00
1.23
1.69
1.92
2.39
2.85
3.80
2.29
2.83
3.92
4.47
5.55
6.65
8.64
4.17
5.17
7.17
8.16
10.15
12.14
15.15
5.26
6.53
9.06
10.33
12.86
15.39
7.19
8.93
12.40
14.14
17.62
21.09
4310
4310
6460
8620
8620
12930
17240
9685
9685
14528
19370
19370
29055
38740
17330
17330
25995
34660
34660
52000
69300
20390
20390
30585
40780
61170
81560
25500
25500
38250
51000
51000
76500
Intl.Ref.No.
DiamondChain no.
lacingPattern
Pitch(P)
Oin Data(d)
(Max)
Plate Height(H)
(max)
Hole Dia(D)
PlateThickness
(T)(Max)
Width OverBearing Pin
(A)(Max)
AverageWeight
Per Meter(Kg)
TensileStrength
(Kgf)(Min)
87
LEAF CHAINS
ISO 4347 / DIN 8152
DIAMOND WORK STANDARD
*O 061 22
*O 061 23
*O 061 34
*O 061 44
*O 061 46
*O 061 66
*DL 06 44 0004
DL 07 23
**DL 07 32
DL 07 43
DL 08 22 0001
DL 08 23 0001
DL 08 34 0001
DL 08 44 0002
DL 08 46 0001
DL 08 66 0003
DL 08 88 0001
2 × 2
2 × 3
3 × 4
4 × 4
4 × 6
6 × 6
4 × 4
2 × 3
3 × 2
4 × 3
2 × 2
2 × 3
3 × 4
4 × 4
4 × 6
6 × 6
8 × 8
9.525
9.525
12.00
12.70
3.28
3.28
4.45
4.45
8.20
8.20
11.08
10.90
3.29
3.29
4.46
4.46
1.25
1.00
2.05
1.60
6.31
7.63
10.63
11.59
14.23
16.87
10.13
12.27
12.27
16.75
9.20
10.75
14.25
16.00
18.50
22.80
30.00
0.24
0.30
0.41
0.47
0.59
0.71
0.44
0.71
0.71
0.99
0.39
0.47
0.66
0.75
0.94
1.12
1.49
1150
1150
1720
2300
2300
3400
2300
1900
1900
3000
1910
1910
2860
3810
3810
4420
7400
DiamondChain no.
lacingPattern
Pitch(P)
Oin Data(d)
(Max)
Plate Height(H)
(max)
Hole Dia(D)
PlateThickness
(T)(Max)
Width OverBearing Pin
(A)(Max)
AverageWeight
Per Meter(Kg)
TensileStrength
(Kgf)(Min)
88
LEAF CHAINS
Note:* Straight sided Plates** DL0732 and DL0723 are different in the pattern of Lacing*** DL1266 0002 has odd no. of pitches and DL1266 0003 has even no. of pitches in one length of chain
DL 10 43 00 01
DL 10 64 00 01
***DL 12 66 0002
***DL 12 66 0003
DL 12 86 0001
DL 12 88 0001
DL 16 44 0001
DL 16 66 0002
DL 16 66 0003
DL 16 66 0004
DL 16 44 0005
DL 16 44 0006
DL 20 22
DL 20 23
DL 20 34
DL 20 44
DL 20 46
DL 20 66
DL 20 65 0001
DL 20 67 0001
DL 24 66 0001
4 × 3
6 × 4
6 × 6
6 × 6
8 × 6
8 × 8
4 × 4
6 × 6
6 × 6
6 × 6
6 × 6
8 × 7
2 × 2
2 × 3
3 × 4
4 × 4
4 × 6
6 × 6
6 × 5
6 × 7
6 × 6
15.875
19.05
19.05
25.40
31.75
31.75
38.10
5.08
5.72
5.72
5.94
9.53
8.27
8.28
8.28
8.27
8.28
10.19
9.53
14.63
13.59
16.10
13.94
18.00
24.10
20.58
21.00
21.00
20.58
21.00
26.44
25.09
33.42
5.12
5.73
5.75
5.96
9.56
8.31
8.31
8.31
8.31
8.31
10.07
9.43
14.49
1.61
1.90
1.76
2.39
4.09
4.05
3.10
3.20
4.05
3.20
4.60
3.23
5.20
15.35
19.50
26.30
28.65
42.55
44.77
53.53
41.90
43.00
44.77
53.00
23.13
27.80
37.18
41.81
51.13
60.49
40.40
46.55
70.40
0.89
1.26
1.93
2.06
3.81
5.14
4.31
4.20
4.48
4.31
5.59
2.54
3.22
4.57
5.22
6.56
7.91
5.06
5.95
11.47
3750
5000
9200
8850
14500
17240
19000
24000
19900
19000
23200
9500
9500
14200
20000
20000
30500
14060
16870
52000
DiamondChain no.
lacingPattern
Pitch(P)
Oin Data(d)
(Max)
Plate Height(H)
(max)
Hole Dia(D)
PlateThickness
(T)(Max)
Width OverBearing Pin
(A)(Max)
AverageWeight
Per Meter(Kg)
TensileStrength
(Kgf)(Min)
89
CONVEYOR CHAINS
EUROPEAN SERIES (BS) - SOLID PIN CHAINS
91
7500
15000
30000
2.0
2.5
3.0
4.0
5.0
6.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
4.0
5.0
6.0
7.0
8.0
9.0
12.0
50.80
63.50
76.20
101.60
127.00
152.40
50.80
76.20
101.60
127.00
152.40
177.80
203.20
228.60
101.60
127.00
152.40
177.80
203.20
228.60
304.80
15.00
19.00
25.40
31.80
47.90
66.67
18.00
23.60
33.20
14.00
19.00
26.90
38.00
46.00
60.00
42.60
49.80
65.40
25.40
38.10
51.00
3.80
5.10
7.10
25.40
38.10
51.00
3.80
3.80
5.10
4.07
3.59
3.29
2.88
2.65
2.49
8.14
7.77
6.56
5.85
5.34
5.00
4.78
4.53
14.50
12.65
11.40
10.52
9.87
9.84
8.31
MinimumTensile
Strengthin
Lbs
Pitch(P)
Inch Metric
Width BetweenInner Plates
(W)(Min)
LargeRollerDia(D1)
BushDia(D)
Solid Pin
Length(L1)
(Max)
Solid PinDia(d)
ConnectingPin Length
(L2)(Max)
Inner Plate
Height(H1)
Thick(T1)
Height(H1)
Thick(T1)
Outer Plate Avg.Wt/Mtr
In(Kg)
CONVEYOR CHAINS
92
45000
60000
90000
5.0
6.0
7.0
8.0
9.0
12.0
6.0
7.0
8.0
9.0
12.0
6.0
9.0
12.0
127.00
152.40
177.80
203.20
228.60
304.80
152.40
177.80
203.20
228.60
304.80
152.40
228.60
304.80
38.10
38.10
38.10
88.90
88.90
88.90
38.10
38.10
38.10
31.80
23.00
29.40
82.00
82.00
94.00
88.20
86.90
98.60
61.00
61.00
63.50
8.90
10.00
13.00
61.00
61.00
63.50
7.60
8.90
10.00
24.69
24.69
22.31
20.55
19.21
16.49
23.73
21.96
20.26
18.94
16.28
29.61
23.78
20.87
MinimumTensile
Strengthin
Lbs
Pitch(P)
Inch Metric
Width BetweenInner Plates
(W)(Min)
LargeRollerDia(D1)
BushDia(D)
Solid Pin
Length(L1)
(Max)
Solid PinDia(d)
ConnectingPin Length
(L2)(Max)
Inner Plate
Height(H1)
Thick(T1)
Height(H1)
Thick(T1)
Outer Plate Avg.Wt/Mtr
In(Kg)
CONVEYOR CHAINS
EUROPEAN SERIES (BS) - HOLLOW PIN CHAINS
93
6000
12000
24000
36000
2.0
2.5
3.0
4.0
5.0
6.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
4.0
5.0
6.0
7.0
8.0
9.0
12.0
5.0
6.0
7.0
8.0
9.0
12.0
50.80
63.50
76.20
101.60
127.00
152.40
50.80
76.20
101.60
127.00
152.40
177.80
203.20
228.60
101.60
127.00
152.40
177.80
203.20
228.60
304.80
127.00
152.40
177.80
203.20
228.60
304.80
15.00
19.00
25.40
38.10
31.80
47.60
66.67
88.90
18.00
23.60
33.20
38.10
10.10
13.20
20.10
23.10
14.00
19.00
26.90
31.80
36.50
45.60
57.00
79.50
38.50
47.50
60.50
84.00
25.40
38.10
51.00
61.00
3.80
5.10
7.10
8.90
25.40
38.10
51.00
61.00
3.80
3.80
5.10
7.60
3.68
3.29
3.02
2.71
2.51
2.38
5.49
7.28
6.21
5.57
5.13
4.83
4.61
4.42
13.16
11.58
11.27
9.77
9.21
8.78
7.90
25.47
22.62
20.58
19.05
17.57
15.49
MinimumTensile
Strengthin
Lbs
Pitch(P)
Inch Metric
WidthBetween
InnerPlates
(W)(Min)
LargeRollerDia(D1)
BushDia(D)
Hollow PinDia(d)
HollowPin Bore
(c)Min
Hollow Pin
Length(L1)
(Max)
ConnectingPin
Length(L2)
(Max)
Inner Plate
Height(H1)
Thick(T1)
Height(H1)
Thick(T1)
Outer Plate Avg.Wt/Mtr
In(Kg)
CONVEYOR CHAINS
94
CONVEYOR CHAINS
METRIC SERIES (ISO) - SOLID PIN CHAINS
20000(M20)
28000(M28)
40000(M40)
56000(M56)
50.00
63.00
80.00
100.00
125.00
160.00
63.00
80.00
100.00
125.00
160.00
200.00
63.00
80.00
100.00
125.00
160.00
200.00
250.00
80.00
100.00
125.00
160.00
200.00
250.00
16.00
18.00
20.00
24.00
25.00
30.00
36.00
42.00
9.00
10.00
12.50
15.00
6.00
7.00
8.50
10.00
30.50
35.00
41.00
46.50
33.10
37.50
44.60
52.30
18.00
20.00
25.00
30.00
2.50
3.00
3.50
4.00
18.00
20.00
25.00
30.00
2.50
3.00
3.50
4.00
2.02
1.72
1.51
1.35
1.22
1.10
2.74
2.35
2.07
1.85
1.65
1.51
4.40
3.76
3.30
2.93
2.60
2.36
2.17
5.63
4.89
4.30
3.77
3.41
3.12
MinimumTensile
Strengthin
Lbs
Pitch(P)
WidthBetween
Inner Plates (W)
(Min)
LargeRollerDia(D1)
BushDia(D)
Solid Pin
Length(L1)
(Max)
Solid PinDia(d)
ConnectingPin Length
(L2)(Max)
Inner Plate
Height(H1)
Thick(T1)
Height(H1)
Thick(T1)
Outer Plate Avg.Wt/Mtr
In(Kg)
95
CONVEYOR CHAINSCONVEYOR CHAINS
80000 (M80)
112000 (M112)
160000 (M160)
224000 (M224)
315000 (M315)
450000 (M450)
630000 (M630)
900000 (M900)
80.00
100.00
125.00
160.00
200.00
250.00
315.00
100.00
125.00
160.00
200.00
250.00
315.00
400.00
160.00
200.00
250.00
315.00
400.00
160.00
200.00
250.00
315.00
400.00
200.00
250.00
315.00
400.00
200.00
250.00
315.00
400.00
250.00
315.00
400.00
315.00
400.00
28.00
32.00
37.00
43.00
48.00
56.00
66.00
78.00
50.00
60.00
70.00
85.00
100.00
120.00
140.00
170.00
18.00
21.00
25.00
30.00
36.00
42.00
50.00
60.00
12.00
15.00
18.00
21.00
25.00
30.00
36.00
44.00
55.00
63.50
73.50
84.00
97.00
114.00
133.00
153.00
60.40
70.30
81.20
93.10
107.00
126.70
145.00
169.60
35.00
40.00
50.00
60.00
70.00
80.00
100.00
120.00
5.00
6.00
7.00
8.00
10.00
12.00
14.00
16.00
35.00
40.00
50.00
60.00
70.00
80.00
100.00
120.00
5.00
6.00
7.00
8.00
10.00
12.00
14.00
16.00
9.40
8.07
7.00
6.07
5.40
4.87
4.43
11.45
9.93
8.59
7.65
6.89
6.26
5.74
13.41
11.80
10.51
9.45
8.59
20.24
17.71
15.69
14.01
12.65
29.35
25.70
22.70
20.24
45.03
39.06
34.13
30.11
61.00
52.99
46.46
84.16
72.72
MinimumTensile
Strengthin
Lbs
Pitch(P)
WidthBetween
Inner Plates (W)(Min)
LargeRollerDia(D1)
BushDia(D)
Solid Pin
Length(L1)
(Max)
Solid PinDia(d)
ConnectingPin Length
(L2)(Max)
Inner Plate
Height(H1)
Thick(T1)
Height(H1)
Thick(T1)
Outer Plate Avg.Wt/Mtr
In(Kg)
CONVEYOR CHAINSMETRIC SERIES (ISO) - HOLLOW PIN CHAINS
28000(MC28)
56000(MC56)
112000(MC112)
224000(MC224)
63.00
80.00
100.00
125.00
160.00
80.00
100.00
125.00
160.00
200.00
250.00
100.00
125.00
160.00
200.00
250.00
315.00
160.00
200.00
250.00
315.00
400.00
20.00
24.00
32.00
43.00
17.50
21.00
29.00
41.00
36.00
50.00
70.00
100.00
8.20
10.20
14.30
20.30
13.00
15.50
22.00
31.00
40.50
46.50
63.00
83.00
43.90
50.00
69.90
92.10
25.00
35.00
50.00
70.00
3.50
4.00
6.00
8.00
25.00
35.00
50.00
70.00
3.50
4.00
6.00
8.00
3.95
3.44
3.04
2.71
2.43
6.79
5.87
5.14
4.52
4.07
3.71
15.16
13.04
11.16
9.62
8.75
7.87
21.96
18.85
16.85
14.32
12.64
MinimumTensile
Strengthin
Lbs
Pitch(P)
Inch Metric
WidthBetween
InnerPlates
(W)(Min)
BushDia(D)
Hollow Pin
Length(L1)
(Max)
Hollow Pin Bore
(c)Min
Hollow PinDia(d)
ConnectingPin
Length (L2)
(Max)
Inner Plate
Height(H1)
Thick(T1)
Height(H1)
Thick(T1)
Outer Plate Avg.Wt/Mtr
In(Kg)
96
WORK STANDARD ENGINEERING CLASS CHAINS
97
BAGASSE CARRIER CHAIN
SHOWER TESTER CONVEYOR CHAIN
9” - DRAG CONVEYOR CHAIN
BUCKET ELEVATOR CHAINFERTILISER INDUSTRY
SCRAPPER RECLAIMER
LIMESTONE SCRAPPER RECLAIMER
OFFSET BAR CHAIN FOR CONSTRUCTION
BUCKET ELEVATOR CHAIN CEMENT INDUSTRY
FLAT CARD CHAINS
TEXTILE CHAINS
99
FLAT CARD CHAINS
C 231
C 232
C 233
C 234
C 236
36.50
36.50
36.50
36.50
36.50
11.10
12.70
15.88
16.70
16.00
9.54
9.54
9.54
9.54
10.00
22.25
22.25
22.25
22.25
23.50
2.65
2.65
2.65
2.65
2.65
14.20
14.20
14.20
14.20
15.50
DIAMONDChain No.
Pitch(P)
Stay Width(W)
Bush Dia(d)
(Max)
Total Height(H)
(Max)
Plate Width(D)
Plate Thickness(T)
C235 or SP1207
SP 1807
36.50
36.50
16.70
15.88
8.20
9.54
22.20
22.25
2.65
2.65
18.20
17.00
DIAMONDChain No.
Pitch(P)
Stay Width(W)
Bush Dia(d)
(Max)
Total Height(H)
(Max)
Plate Width(D)
Plate Thickness(T)
TEXTILE CHAINS
FLAT CARD CHAINS
SP 1976
C365220001
36.50
36.50
16.00
16.00
24.00
24.00
2.65
2.65
25.90
38.00
DIAMONDChain No.
Pitch(P)
Stay Width(W)
Bush Dia(d)
(Max)
Total Height(H)
(Max)
Plate Thickness(T)
100
SELECTION OF ROLLER CHAIN DRIVES
The following data should be taken into consideration while selecting roller chain drives.
a. Horsepower to be transmittedb. RPM of the driving and driven sprocket (Speed ratio)c. Load classificationd. Space limitations if ane. Driven machinef. Source of power
If the pitch centre distance and number of teeth on both driving and driven sprockets are known, you can use the following formula, tables and charts to calculate chain lengths.
For maximum service life, smooth operation and optimum performance, the following points should be considered, while determining the number of teeth in the pinion. a) As most drives have an even number of pitches in the chain, the use of a pinion with an odd number of teeth ensures even distribution of chain and wheel tooth wear. b) Pinions for normal, steady drives should generally not have less than 17 teeth, the reason being that a chain forms a polygon around the pinion. When the pinion speed is constant, the chain speed is subject to a regular cyclic variation. The percentage of cyclic variation becomes less marked as the number of teeth increases - and in fact becomes insignificant for the majority of applications when the number of teeth in the pinion exceeds 17.
c) A minimum of 23 teeth is recommended on moderate shock drives where the speed of the pinion exceeds 50 % of the maximum rated speed, and for heavy shock drives where the speed of the pinion exceeds 25% of the maximum rated speed. d) The pinion should be heat treated to HV 10 - 550 for smooth drives where the pinion speeds exceeds 70 % of the maximum speed and operates under full horsepower rating. For heavy shock drives, the pinion should be treated in all cases.
If shock loads are expected, then first determine the class of load on the basis of the drives equipment (see table 1).
SELECTION PROCEDURE
DETERMINE THE CLASS OF LOAD
Note : If table 1 does not list your equipment, go by its similarity to a listed item
LOAD CLASSIFICATIONS TABLE 1
UNIFORM LOAD
Centrifugal pumps,Agitator for liquids, Conveyors, Fans- Uniform load
Generators, M/c's all types with uniform non - reversing loads
Reciprocating pumps, Wood working M/c's Grinders, Conveyors - Irregular load
Mixers and Machines all types with moderate shock and non- reversing loads
Presses, Earth moving equipment Shears, Cranes & Hoists, Reciprocating and Shaker type conveyors, Crushers, Reciprocating feeders Machines - all types with severe impact shock loads or variation and reversing service
MODERATE SHOCK LOAD HEAVY SHOCK LOAD
102
DETERMINE CHAIN LENGTH
SELECT THE LARGE SPROCKET
FINAL SELECTION OF CHAIN
ESTABLISH THE DESIGN HORSEPOWER
SELECTION OF ROLLER CHAIN DRIVES
Selection of multi- strand chains will become necessary if available space is limited or high speeds call for a chain with lower pitch. The strand factors are given in Table 3. To facilitate selection of multi-strand chains, multiply the horsepower rating for single strand chains by the corresponding strand factor.
ISO 10823 - 1996 standard of guidance can be referred for selection of chain drive power.
Actual power = Input power x service factor x strand factor.Considering the actual powerand rpm of the pinion, using the horsepower rating chart selectthe chain for the application.
By using the required shaft speed ratio select the number of teeth in the large sprocket. If the required shaft speed ratio cannot be obtained with a standard sprocket, increase the number of teeth in the small sprocket by one or two, to obtain an acceptable speed ratio with a slightly larger standard sprocket. The size ofthe large sprocket is affected by the allowable wear elongation of the chain which may go upto 3 %. The use of sprockets with more than 67 teeth reduces the life of the chain expressed in percentage elongation as:
Permissible wear elongation = 200/ N (%). The speed ratio for a single drive should be not exceed 10:1A greater ratio will make it necessary to provide for two drives in series.
Compute the length of chain required using the formula given below. If possible, adjust the centre distance, so that the length of chain required is always in an even number of pitches. For optimum life of the chain and sprockets the centre distance between the two sprockets should be 30 to 50 times the chain pitch.
Where L= Chain length in pitches P= Chain Pitch C= Contemplated centre distance N = Number of teeth on large sprocket N = Number of teeth on small sprocket
SERVICE FACTOR TABLE 2
Type of Driven load
UniformModerate ShockHeavy Shock
Internal Combustion Engine with Hydraulic Drive
1.01.2
Electric Motor or Turbine
1.01.31.4
Internal Combustion Engine with Mechanical Drive
1.21.41.5 1.7
TYPES OF INPUT POWER
SERVICE FACTOR TABLE 3
23456810
1.72.53.33.94.66.27.5
Multiple Strand FactorNo. of Strands
Establish the design horsepower by multiplying the specified horsepower value with the service factor given in Table 2.
103
ROLLER CHAIN OPERATION TEMPERATURE
Chain description
Carbon sheet chains
Specially designed chains
Stainless steel chains (SS 304)
0°C to +170°C
*+170°C to +270°C
-20°C to +400°C
Temperature Range
• * +170°C to +260°C, however some loss of component hardness and reduced.
• Reduced wear life can be expected.
• * +170°C to +260°C, high temperature synthetic oil to be used.
104
INSTALLATION AND MAINTENANCE OF CHAIN DRIVES
INSTALLATION
a) Shaft Alignment
b) Installation of Sprockets
d) Chain Tension
c) Mounting of Chain
Careful and accurate installation is very essential for trouble free operation and long life. The following instructions should therefore be carefully observed.
Make sure that all shafts are parallel and level. Check alignment with a spirit level. The shafts should be supported by sufficiently strong bearings to avoid any displacement during operation.
Align the sprockets exactly on the shafts. Check with a straight edge of a string held against the sides of the sprocket face. Improper alignment of sprockets will cause abnormal wear on the chain link plates and on the sides of the sprocket teeth. Check occasionally during operation for such wear.
The chain should never run with both sides tight. To check tension, turn one sprocket to tighten the lower span of the chain. Then measure the sag of the lower strand which should be about 2 to 3% of the tangent to the sprockets. In an inclined drive the sag should be less. In vertical drives a chain tensioner must be provided for.
Wrap the chain around the sprockets and bring the two ends together on one sprocket to connect them with a connecting link.
105
LUBRICATION OF CHAIN DRIVES
Chain life will vary appreciably depending on the way the drive is lubricated. A properly lubricated chain can last more than 100 times as long as the same chain with poor lubrication. A good grade of clean petroleum oil without additives, free flowing at the prevailing temperatures should be used. Some additives leave a varnish or gum deposit which prevents the oil from entering chain joints. Heavy oils and greases are generally too stiff to enter the chain joints and should not be used or it should be heated up indirectly and chain should be immersed in molten bath.
With proper lubrication, a separating wedge of lubricant is formed between the pins and bushings in the chain joints, much like that formed in journal bearings. The viscosity of the lubricant greatly affects its separating force and its ability to become a wedge between moving parts. The highest viscosity oil which will flow between the chain link plates and fill the pin bushing areas will provide the best wear life. This is essential to minimise metal to metal contact and, if supplied in sufficient volume, the lubricant also provides effective cooling and impact dampening at higher speeds.
The best lubricant for most applications is a light petroleum oil. High viscosity oil and grease are suitable only for slow drives exposed to weather conditions.
The lubricant recommended by TI Diamond for the various surrounding temperatures are indicated in the following table:
Chain drives should be protected from dust, dirt and moisture. Depending on the type of application and type of lubrication, system should be cleaned and oil change is recommended after the first 500 operating hours, to be repeated every 2500 hours.
Oil Stream Lubrication
Disc Lubrication
Drip feed lubrication
Oil Bath Lubrication
Manual lubrication
- Effective for heavy load, high
power and high speed.
- Oil flow about 4lpm
- System should run without oil
shortage
- Effective at 3 m/sec
- Disc to be dipped 12 - 25 mm.
- Effective at medium and low
speed
- Chain pitch line to be dipped
6 - 12 mm.
4 to 10 drops of oil per minute
between the link plates of each
chain strand.
Periodically once in 8 hours of
operation.
Lubrication Chart
Oil Stream Lubrication
Oil Bath or Disc Lubrication
Drip Feed Lubrication
Manual Lubrication
Chai
n Sp
eed
(m/s
)
Chain Pitch (mm.)
LUBRICANT
Chain Pitch -10° C to 0° C 0° C to 40° C 40° C to 50° C 50° C to 60° C
Less than 5/8”
3/4” - 1”
11/4”
11/2” & Above
SAE 10
SAE 20
SAE 30
SAE 20
SAE 30
SAE 40
SAE 30
SAE 40
SAE 50
SAE 40
SAE 50
106
Regional Offices
NorthTIDC India(Unit of Tube Investments of India Ltd.)2nd Floor, Raffel Millennium Tower, 9-B, Pusa Road,Rajendra Nagar, Rajendra Place,New Delhi - 110 060. 011-4587 0776 / 4150 2255 / 66 [email protected]
EastTIDC India(Unit of Tube Investments of India Ltd.)Pradip Estates, 2nd Floor, No.6A, Middleton Street,Kolkata - 700 071. 033-2283 0410 / 0409 / 0636 033-2281 0289 [email protected]
SouthTIDC India(Unit of Tube Investments of India Ltd.)Post Bag No.11, Ambattur, MTH Road,Chennai - 600 053. 044-4223 5590 / 5594 044-4223 5556 / 5595 [email protected]
WestTIDC India(Unit of Tube Investments of India Ltd.)Devi House, First Floor, Plot No.37,CTS No.1576, Shivaji Nagar, Pune - 411 005. 020-6709 9713 [email protected]
60Yrs
RELIABILITY BUILT OVER
TIDC INDIA(Unit of Tube Investments of India Ltd.)
FACTORY / MARKETING HEAD OFFICEPost Bag No.11, Ambattur, MTH Road,Chennai - 600 053. 044-4223 5509 / 5510 044-4223 5556 [email protected]
www.tidcindia.in