YP-LEDK-BLB2 YP-LEDK-BLG2 YP-LEDK-BLR2 YP-LEDK-BLW2instructions.pdf · 2018-04-02 · YP-LEDK-BLB2...
2
YP-LEDK-BLB2 YP-LEDK-BLG2 YP-LEDK-BLR2 YP-LEDK-BLW2 1. 2 ea. Nut 2. 2 ea. Black nylon washer 3. 2 ea. Rubber gasket 4. 2 ea. Complete LED assembly 5. 1 ea. Drill bit 6. 1 ea. SAE Y-Splitter 1. 2. 3. 4. 5. 6. Southern Audio Services, Inc.. 14763 Florida Blvd.., Baton Rouge, La 70819 225-272-7135 or 1-800-843-8823 www.yak-power.com, www.southernaudioservices.com 4. Use the rubber gasket between boat hull and nylon washer. (Fig 2.) You may use silicone on the threads if concerned with the chance of leakage. 5. When mounting the YP-LED fittings on thin plastic or in metal, use a 25/64 (10 mm.) drill bit. Use the provided backing nut (Fig. 3) Fig. 1 Fig. 2 Fig. 3 1. Make sure there is at least 0.75” of clearance from the face of the mounting surface. If not the LED fitting will not seat properly. (Fig. 1) 2. Use the provided drill bit or a 23/64 (9mm) bit to drill the mounting hole. (Fig. 1) 3. YP-LED fittings are designed to be screwed into a kayak hull with a 5/8” socket wrench. There is no need to use a backing nut in most cases. (Fig. 2) 2. 3. 4. YP-LEDK-BLB2 YP-LEDK-BLG2 YP-LEDK-BLR2 YP-LEDK-BLW2 1. 2 ea. Nut 2. 2 ea. Black nylon washer 3. 2 ea. Rubber gasket 4. 2 ea. Complete LED assembly 5. 1 ea. Drill bit 6. 1 ea. SAE Y-Splitter 1. 2. 3. 4. 5. 6. Southern Audio Services, Inc.. 14763 Florida Blvd.., Baton Rouge, La 70819 225-272-7135 or 1-800-843-8823 www.yak-power.com, www.southernaudioservices.com 4. Use the rubber gasket between boat hull and nylon washer. (Fig 2.) You may use silicone on the threads if concerned with the chance of leakage. 5. When mounting the YP-LED fittings on thin plastic or in metal, use a 25/64 (10 mm.) drill bit. Use the provided backing nut (Fig. 3) Fig. 1 Fig. 2 Fig. 3 1. Make sure there is at least 0.75” of clearance from the face of the mounting surface. If not the LED fitting will not seat properly. (Fig. 1) 2. Use the provided drill bit or a 23/64 (9mm) bit to drill the mounting hole. (Fig. 1) 3. YP-LED fittings are designed to be screwed into a kayak hull with a 5/8” socket wrench. There is no need to use a backing nut in most cases. (Fig. 2) 2. 3. 4. YP-LEDK-BLB2 YP-LEDK-BLG2 YP-LEDK-BLR2 YP-LEDK-BLW2 1. 2 ea. Nut 2. 2 ea. Black nylon washer 3. 2 ea. Rubber gasket 4. 2 ea. Complete LED assembly 5. 1 ea. Drill bit 6. 1 ea. SAE Y-Splitter 1. 2. 3. 4. 5. 6. Southern Audio Services, Inc.. 14763 Florida Blvd.., Baton Rouge, La 70819 225-272-7135 or 1-800-843-8823 www.yak-power.com, www.southernaudioservices.com 4. Use the rubber gasket between boat hull and nylon washer. (Fig 2.) You may use silicone on the threads if concerned with the chance of leakage. 5. When mounting the YP-LED fittings on thin plastic or in metal, use a 25/64 (10 mm.) drill bit. Use the provided backing nut (Fig. 3) Fig. 1 Fig. 2 Fig. 3 1. Make sure there is at least 0.75” of clearance from the face of the mounting surface. If not the LED fitting will not seat properly. (Fig. 1) 2. Use the provided drill bit or a 23/64 (9mm) bit to drill the mounting hole. (Fig. 1) 3. YP-LED fittings are designed to be screwed into a kayak hull with a 5/8” socket wrench. There is no need to use a backing nut in most cases. (Fig. 2) 2. 3. 4.
Transcript of YP-LEDK-BLB2 YP-LEDK-BLG2 YP-LEDK-BLR2 YP-LEDK-BLW2instructions.pdf · 2018-04-02 · YP-LEDK-BLB2...
YP-LEDK-BLB2 YP-LEDK-BLG2 YP-LEDK-BLR2 YP-LEDK-BLW2
1. 2 ea. Nut2. 2 ea. Black nylon washer3. 2 ea. Rubber gasket4. 2 ea. Complete LED assembly5. 1 ea. Drill bit6. 1 ea. SAE Y-Splitter
1.
2.
3.
4.
5.
6.
Southern Audio Services, Inc.. 14763 Florida Blvd.., Baton Rouge, La 70819 225-272-7135 or 1-800-843-8823 www.yak-power.com, www.southernaudioservices.com
4. Use the rubber gasket between boat hull and nylon washer. (Fig 2.) You may use silicone on the threads if concerned with the chance of leakage.
5. When mounting the YP-LED fittings on thin plastic or in metal, use a 25/64 (10 mm.) drill bit. Use the provided backing nut (Fig. 3)
Fig. 1 Fig. 2 Fig. 3
1. Make sure there is at least 0.75” of clearance from the face of the mounting surface. If not the LED fitting will not seat properly. (Fig. 1)
2. Use the provided drill bit or a 23/64 (9mm) bit to drill the mounting hole. (Fig. 1)
3. YP-LED fittings are designed to be screwed into a kayak hull with a 5/8” socket wrench. There is no need to use a backing nut in most cases. (Fig. 2)
2.
3.4.
YP-LEDK-BLB2 YP-LEDK-BLG2 YP-LEDK-BLR2 YP-LEDK-BLW2
1. 2 ea. Nut2. 2 ea. Black nylon washer3. 2 ea. Rubber gasket4. 2 ea. Complete LED assembly5. 1 ea. Drill bit6. 1 ea. SAE Y-Splitter
1.
2.
3.
4.
5.
6.
Southern Audio Services, Inc.. 14763 Florida Blvd.., Baton Rouge, La 70819 225-272-7135 or 1-800-843-8823 www.yak-power.com, www.southernaudioservices.com
4. Use the rubber gasket between boat hull and nylon washer. (Fig 2.) You may use silicone on the threads if concerned with the chance of leakage.
5. When mounting the YP-LED fittings on thin plastic or in metal, use a 25/64 (10 mm.) drill bit. Use the provided backing nut (Fig. 3)
Fig. 1 Fig. 2 Fig. 3
1. Make sure there is at least 0.75” of clearance from the face of the mounting surface. If not the LED fitting will not seat properly. (Fig. 1)
2. Use the provided drill bit or a 23/64 (9mm) bit to drill the mounting hole. (Fig. 1)
3. YP-LED fittings are designed to be screwed into a kayak hull with a 5/8” socket wrench. There is no need to use a backing nut in most cases. (Fig. 2)
2.
3.4.
YP-LEDK-BLB2 YP-LEDK-BLG2 YP-LEDK-BLR2 YP-LEDK-BLW2
1. 2 ea. Nut2. 2 ea. Black nylon washer3. 2 ea. Rubber gasket4. 2 ea. Complete LED assembly5. 1 ea. Drill bit6. 1 ea. SAE Y-Splitter
1.
2.
3.
4.
5.
6.
Southern Audio Services, Inc.. 14763 Florida Blvd.., Baton Rouge, La 70819 225-272-7135 or 1-800-843-8823 www.yak-power.com, www.southernaudioservices.com
4. Use the rubber gasket between boat hull and nylon washer. (Fig 2.) You may use silicone on the threads if concerned with the chance of leakage.
5. When mounting the YP-LED fittings on thin plastic or in metal, use a 25/64 (10 mm.) drill bit. Use the provided backing nut (Fig. 3)
Fig. 1 Fig. 2 Fig. 3
1. Make sure there is at least 0.75” of clearance from the face of the mounting surface. If not the LED fitting will not seat properly. (Fig. 1)
2. Use the provided drill bit or a 23/64 (9mm) bit to drill the mounting hole. (Fig. 1)
3. YP-LED fittings are designed to be screwed into a kayak hull with a 5/8” socket wrench. There is no need to use a backing nut in most cases. (Fig. 2)
2.
3.4.
YP-LEDK-BLB2 YP-LEDK-BLG2 YP-LEDK-BLR2 YP-LEDK-BLW2
Southern Audio Services, Inc.. 14763 Florida Blvd.., Baton Rouge, La 70819 225-272-7135 or 1-800-843-8823 www.yak-power.com, www.southernaudioservices.com
(Sold Separately)
YP-BTP12 12” Long
YP-BTP96 96” Long
(Sold Separately) (Optional Switching System)
YP-RP5R
(Sold Separately) (Optional Switch)
YP-ILS16
The 3.5 mm plugs are inserted into the SAE Y-Splitter. The SAE end of the Y-Splitter canbe attached to power by using any of thefollowing optional components:YP-RP5RYP-BTP12YP-BTP96YP-BBKYP-SS148YP-RP5CSIHYP-RP5CS3
YP-LEDK-BLB2 YP-LEDK-BLG2 YP-LEDK-BLR2 YP-LEDK-BLW2
Southern Audio Services, Inc.. 14763 Florida Blvd.., Baton Rouge, La 70819 225-272-7135 or 1-800-843-8823 www.yak-power.com, www.southernaudioservices.com
(Sold Separately)
YP-BTP12 12” Long
YP-BTP96 96” Long
(Sold Separately) (Optional Switching System)
YP-RP5R
(Sold Separately) (Optional Switch)
YP-ILS16
The 3.5 mm plugs are inserted into the SAE Y-Splitter. The SAE end of the Y-Splitter canbe attached to power by using any of thefollowing optional components:YP-RP5RYP-BTP12YP-BTP96YP-BBKYP-SS148YP-RP5CSIHYP-RP5CS3
YP-LEDK-BLB2 YP-LEDK-BLG2 YP-LEDK-BLR2 YP-LEDK-BLW2
Southern Audio Services, Inc.. 14763 Florida Blvd.., Baton Rouge, La 70819 225-272-7135 or 1-800-843-8823 www.yak-power.com, www.southernaudioservices.com
(Sold Separately)
YP-BTP12 12” Long
YP-BTP96 96” Long
(Sold Separately) (Optional Switching System)
YP-RP5R
(Sold Separately) (Optional Switch)
YP-ILS16
The 3.5 mm plugs are inserted into the SAE Y-Splitter. The SAE end of the Y-Splitter canbe attached to power by using any of thefollowing optional components:YP-RP5RYP-BTP12YP-BTP96YP-BBKYP-SS148YP-RP5CSIHYP-RP5CS3
![[VORSCHAU] YP-U4.2](https://static.fdocuments.net/doc/165x107/55679836d8b42a1a588b504a/vorschau-yp-u42.jpg)
![[VORSCHAU] YP-U4.1](https://static.fdocuments.net/doc/165x107/55679832d8b42a1a588b5048/vorschau-yp-u41.jpg)
![YP-P2 [BENUTZERHANDBUCH]](https://static.fdocuments.net/doc/165x107/557dd7acd8b42a4c238b4e78/yp-p2-benutzerhandbuch.jpg)
