YouTek Prestige PRO - d39o10hdlsc638.cloudfront.net Prestige PRO Total String Length: 11 m / 36,5 ft...

YouTek Prestige PRO

Total String Length:

11 m / 36,5 ft

String Pattern:

16 Main (6 m / 20 ft)

19 Cross (5 m / 16,5 ft)

Rec. String Tension:

26 +/- 2kp / 57 +/- 5lbs

Main Strings

Start at the top with the center holes L35 and R35. For the

left side of the main strings clamp 3 m (10 ft) at hole L35

and R35. Tighten 2 main strings right, two main strings left and so on, skipping holes L8 + R8, L28 + R28, L+R29. Tie

off at holes L29+R29.

Cross Strings

Tie on the cross strings at hole R30 and lace string through hole R28. Tighten all 19 cross strings in direction of racquet

throat. Tie off at hole R7.

For optimum performance use HEAD Sonic Pro.

YouTek Prestige MID

Total String Length: 11 m / 36,5 ft

String Pattern:

18 Main (6 m/20 ft)

20 Cross (5 m / 16,5 ft)


26 +/- 2kp / 57 +/- 5lbs

Main Strings


left side of the main strings clamp 3m (10ft) at hole R38. Tighten 2 main strings right, two main strings left and so on,

skipping holes L+R31, L+R29 as well as L+R8 and L+R10.

Tie off at holes L+R7.

Cross Strings Tie on the cross strings at hole R 33 and lace string through

hole R31. Tighten all 20 cross strings in direction of racquet



YouTek Prestige MP


11 m / 36,5 ft

String Pattern:

18 Main (6 m/20 ft)

20 Cross (5 m / 16,5 ft)


26 +/- 2kp / 57 +/- 5lbs

Main Strings


left side of the main strings clamp 3m (10ft) at hole L38 and

R38. Tighten 2 main strings right, two main strings left and so on, skipping holes L+R31, L+R29 as well as L+R9. Tie off

at holes L+R7.

Cross Strings

Tie on the cross strings at hole R 33 and lace string through hole R31. Tighten all 20 cross strings in direction of racquet



YouTek Speed Pro


String Pattern: 16 Main (6 m / 20 ft)

19 Cross (5 m / 16,5 ft)

RECOMMENDED STRING TENSION: 26 +/- 2kp / 57 +/- 5lbs

Main Strings Start at the bottom with the center holes L1+R1. For the left and the right

side of the main strings clamp 3 m (10 ft) each at hole L1 and R1 respectively. Tighten 2 main strings left, two main strings right and so on, skipping holes L7+R7, L9+R9 as well as L29+R29, L27+R27. Tie off at holes

L28+R28.

Cross Strings For the cross string measure 5 m (16,5 ft) string. Tie on the cross strings at hole L30/R30 and lace string through hole L29/R29. Tighten all 19 cross

strings in direction of racquet throat. Tie off at hole R5/L5.


YouTek Speed MP 16/19


String Pattern: 16 Main (6 m/20 ft)

19 Cross (5 m / 16,5 ft)




L28+R28.




YouTek Speed MP 18/20



20 Cross (5 m / 16,5 ft)


Main Strings Start at the top with the centre holes L38+R38. For the left and the right side

of the main strings clamp 3 m (10 ft) each at hole L38 and R38 respectively. Tighten 2 main strings left, two main strings right and so on, skipping holes L31+R31, L29+R29 as well as L8+R8, L10+R10. Tie off at holes L9+R9.

Cross Strings

For the cross string measure 5 m (16,5 ft) string. Tie on the cross strings at hole L33/R33 and lace string through hole L31/R31. Tighten all 20 cross strings in direction of racquet throat. Tie off at hole R7/L7.


YouTek Speed Elite



19 Cross (5 m / 16,5 ft)




L28+R28.




YouTek Speed Lite



19 Cross (5 m / 16,5 ft)




L28+R28.



For optimum performance use HEAD ETS.

YouTek Radical Pro


String Pattern:

16 Main (6 m / 20 ft)

19 Cross (5 m / 16,5 ft)


26 +/- 2kp / 57 +/- 5lbs

Main Strings

Start at the bottom with the center holes L1+R1. For the left and the right side of the main strings clamp 3 m (10 ft) each

at hole L1 and R1 respectively. Tighten 2 main strings left,

two main strings right and so on, skipping holes L7+R7,

L9+R9 as well as L29+R29, L27+R27. Tie off at holes

L28+R28.

Cross Strings

For the cross string measure 5 m (16,5 ft) string. Tie on the

cross strings at hole L32/R32 and lace string through hole

L29/R29. Tighten all 19 cross strings in direction of racquet throat. Tie off at hole R5/L5.


YouTek Radical MP


String Pattern:

18 Main (6 m/20 ft)

20 Cross (5 m / 16,5 ft)


26 +/- 2kp / 57 +/- 5lbs

Main Strings

Start at the top with the centre holes L38+R38. For the left

and the right side of the main strings clamp 3 m (10 ft) each

at hole L38 and R38 respectively. Tighten 2 main strings left, two main strings right and so on, skipping holes

L31+R31, L29+R29 as well as L9+R9. Tie off at holes

L8+R8.

Cross Strings For the cross string measure 5 m (16,5 ft) string. Tie on the


L31/R31. Tighten all 20 cross strings in direction of racquet

throat. Tie off at hole L7+R7.


YouTek Radical OS


11 m / 36,5 ft

String Pattern:

18 Main (6 m/20 ft)

19 Cross (5 m / 16,5 ft)


26 +/- 2kp / 57 +/- 5lbs

Main Strings

Start at the top with the center holes L37+R37. For the left


at hole L37 and R37 respectively. Tighten 2 main strings

left, two main strings right and so on, skipping holes L29+R29 as well as L8+R8, L10+R10. Tie off at holes

L9+R9.

Cross Strings

For the cross string measure 5 m (16,5 ft) string. Tie on the cross strings at hole L32/R32 and lace string through hole


throat. Tie off at hole R7/L7.


YouTek Radical Lite


String Pattern:

16 Main (6 m/20 ft)

19 Cross (5 m / 16,5 ft)


26 +/- 2kp / 57 +/- 5lbs

Main Strings

Start at the bottom with the center holes L1+R1. For the left


at hole L1 and R1 respectively. Tighten 2 main strings left, two main strings right and so on, skipping holes L7+R7,

L9+R9 as well as L29+R29, L27+R27. Tie off at holes

L28+R28.




throat. Tie off at hole R5/L5.


YouTek Extreme Pro


String Pattern:

16 Main (6 m / 20 ft)

19 Cross (5 m / 16,5 ft)


26 +/- 2kp / 57 +/- 5lbs

Main Strings

Start at the bottom with the centre holes L1+R1. For the left and the right side of the main strings clamp 3 m (10 ft) each

at hole L1+R1 respectively. Tighten 2 main strings left, two

main strings right and so on, skipping holes L8+R8 as well

as L28+R28. Tie off at holes L6+R6.

Cross Strings


cross strings at hole R29/L29 and lace string through hole


throat. Tie off at hole L11/R11.


YouTek Extreme MP


11 m / 36,5 ft

String Pattern:

16 Main (6 m / 20 ft)

19 Cross (5 m / 16,5 ft)


26 +/- 2kp / 57 +/- 5lbs

Main Strings

Start at the bottom with the centre holes L1+R1. For the left


at hole L1+R1 respectively. Tighten 2 main strings left, two main strings right and so on, skipping holes L8+R8 as well







YouTek Extreme ELITE


11 m / 36,5 ft

String Pattern:

16 Main (6 m / 20 ft) 19 Cross (5 m / 16,5 ft)


26 +/- 2kp / 57 +/- 5lbs

Main Strings

Start at the bottom with the centre holes L1+R1. For the left

and the right side of the main strings clamp 3 m (10 ft) each at hole L1+R1 respectively. Tighten 2 main strings left, two

main strings right and so on, skipping holes L8+R8 as well


Cross Strings





For optimum performance use HEAD Synthetic Gut.

YouTek Instinct MP


11 m / 36,5 ft

String Pattern:

18 Main (6 m / 20 ft) 19 Cross (5 m / 16,5 ft)


26 +/- 2kp / 57 +/- 5lbs

Main Strings

Start at the top with the center holes L37 + R37. For the left and the right side of the main strings clamp 3m (10ft) each

at hole L37 + R37 respectively. Tighten 2 main strings left,

two main strings right and so on, skipping holes L8 + R8,

L10 + R10, L28 + R28 as well as L30 + R30. Tie off at holes

L9 + R9.

Cross Strings


cross strings at hole L32 and lace string through hole L30.

Tighten all 19 cross strings in direction of racquet throat. Tie off at hole R7.


YouTek Instinct Lite


String Pattern:

18 Main (6 m/20 ft)

20 Cross (5 m / 16,5 ft)


26 +/- 2kp / 57 +/- 5lbs

Main Strings

Start at the top with the center holes L37 + R37. For the left

and the right side of the main strings clamp 3m (10ft) each

at hole L37 + R37 respectively. Tighten 2 main strings left, two main strings right and so on, skipping holes L8 + R8,

L10 + R10, L28 + R28 as well as L30 + R30. Tie off at holes

L9 + R9.


cross strings at hole R 30 and lace string through hole R28.

Tighten all 19 cross strings in direction of racquet throat. Tie

off at hole L6.


YouTek Monster


11 m / 36,5 ft


19 Cross (5 m / 16,5 ft)


26 +/- 2kp / 57 +/- 5lbs

Main Strings Start at the top with the center holes L35 + R35. For the left

and the right side of the main strings clamp 3m (10ft) each

at hole L35 + R35 respectively. Tighten 2 main strings left,

two main strings right and so on, skipping holes L8 +R8 as

well as L28 + R28. Tie off at holes L29 + R29.

Cross Strings





YouTek Mojo


11 m / 36,5 ft

String Pattern:

18 Main (6 m/20 ft) 19 Cross (5 m / 16,5 ft)


26 +/- 2kp / 57 +/- 5lbs

Main Strings

Start at the top with the centre holes L37 + R37. For the left

and right side of the main strings clamp 3 m(10ft) string each at hole L37 and R37 respectively Tighten two main

strings left, two main strings right and so on, skipping L8 +

R8, L10 + R10, and L29 + R29. Tie off at holes L9 + R9.

Cross Strings For the cross strings measure 5 m (16,5 ft) string. Tie on

the strings at hole R32 and lace string through hole

R29.Tighten all 19 cross strings in direction of racquet

throat. Tie off at hole L7.


YouTek Raptor MP


11 m / 36,5 ft

String Pattern:



26 +/- 2kp / 57 +/- 5lbs

Main Strings

Start at the top with the center holes L35 + R35. For the left

and the right side of the main strings clamp 3m (10ft) each at hole L35 + R35 respectively. Tighten 2 main strings left,

two main strings right and so on, skipping holes L8 +R8 as

well as L28 + R28. Tie off at holes L29 + R29.




off at hole R7.


YouTek Raptor OS


11 m / 36,5 ft

String Pattern:



27 +/- 2kp / 59 +/- 5lbs

Main Strings

Start at the throat with the center holes L1 + R1. For the left

and the right side of the main strings clamp 3m (10ft) each at hole L1 + R1 respectively. Tighten 2 main strings left, two

main strings right and so on, skipping holes L7 +R7, L9 +

R9 as well as L28 + R28. Tie off at holes L8 + R8.


cross strings at hole R 30 and lace string through hole R28.


off at hole L6.


MG.Extreme Pro / MP

with Teflon® polymer Total String Length:

11 m / 36,5 ft

String Pattern: 16 Main (6 m / 20 ft) 19 Cross (5 m / 16,5 ft)

RECOMMENDED STRING TENSION:

26 +/- 2kp / 57 +/- 5lbs Main Strings

Start at the bottom with the centre holes L1+R1. For the left and the right side of the main strings clamp 3 m (10 ft) each at hole L1+R1 respectively.

Tighten 2 main strings left, two main strings right and so on, skipping holes L8+R8 as well as L28+R28. Tie off at holes L6+R6.

Cross Strings For the cross string measure 5 m (16,5 ft) string. Tie on the cross strings at

hole R29/L29 and lace string through hole L28/R28. Tighten all 19 cross strings in direction of racquet throat. Tie off at hole L11/R11.


MicroGel Prestige Pro Total String Length:

11 m/36,5 ft String Pattern:

16 main strings (6 m / 20 ft) 19 cross strings (5 m / 16,5 ft)



The Main Strings

Start at the top with the center holes L35 and R35. For the left side of the main strings clamp 3 m (10 ft) at hole L35 and R35. Tighten 2 main strings

right, two main strings left and so on, skipping holes L8 + R8, L28 + R28, L+R29. Tie off at holes L29+R29.

The Cross Strings Tie on the cross strings at hole R30 and lace string through hole R28. Tighten

all 19 cross strings in direction of racquet throat. Tie off at hole R7.

MicroGel Prestige Mid Total String Length: 11 m/36,5 ft String Pattern:

18 main strings (6 m/20 ft) 20 cross strings (5 m /16,5ft)

For optimum performance use HEAD FXP Strings


The Main Strings Start at the top with the center holes L38 and R38. For the left side of the

main strings clamp 3m (10ft) at hole R38. Tighten 2 main strings right, two main strings left and so on, skipping holes L+R31, L+R29 as well as L+R8

and L+R10. Tie off at holes L+R7. The Cross Strings

Tie on the cross strings at hole R 33 and lace string through hole R31. Tighten all 20 cross strings in direction of racquet throat. Tie off at hole R7.

MicroGel Prestige MP Total String Length: 11,5m/38 ft

String Pattern: 18 main strings (6,3m/21ft)

20 cross strings (5,2m /17ft) RECOMMENDED STRING TENSION:

26 +/- 2kp / 57 +/- 5lbs

The Main Strings Start at the top with the center holes L38 and R38. For the left side of the main strings clamp 3m (10ft) at hole L38 and R38. Tighten 2 main strings

right, two main strings left and so on, skipping holes L+R31, L+R29 as well as L+R9. Tie off at holes L+R7.

The Cross Strings Tie on the cross strings at hole R 33 and lace string through hole R31.


MicroGel Radical MP Total String Length:

11 m/36,5 ft

String Pattern:

18 main strings (6 m/20 ft)

20 cross strings (5 m /16,5 ft)

For optimum performance use HEAD Sonic Pro string


26 +/- 2kp / 57 +/- 5lbs The Main Strings

Start at the top with the centre holes L + R38. For the left and the right side of the main strings clamp 3m (10ft) each at hole L38 and R38 respectively.

Tighten 2 main strings left, two main strings right and so on, skipping holes L9 +R9, L29 + R29 as well as L31 + R31. Tie off at holes L8 + R8.

The Cross Strings For the cross string measure 5 m (16,5 ft) string. Tie on the cross strings at

hole R 33 and lace string through hole R31. Tighten all 20 cross strings in direction of racquet throat. Tie off at hole R7.

MicroGel Radical Pro Total String Length:

11 m/36,5 ft

String Pattern:






Start at the buttom with the center holes L1 + R1. For the left and the right side of the main strings clamp 3m (10ft) each at hole L1 and R1 respectively.



hole L 31 and lace string through hole L 29. Tighten all 19 cross strings in direction of racquet throat. Tie off at hole L6.

MicroGel Radical OS Total String Length:

11 m/36,5 ft

String Pattern:



For optimum performance use HEAD Sonic Pro string RECOMMENDED STRING TENSION:

27 – 31 kp / 58 – 68 lbs

The Main Strings Start at the top with the center holes L + R37. For the left and the right side of the main strings clamp 3m (10ft) each at hole L37 and R37 respectively.


The Cross Strings

For the cross string measure 5 m (16,5 ft) string. Tie on the cross strings at hole R 32 and lace string through hole R29. Tighten all 19 cross strings in direction of racquet throat. Tie off at hole L7.

MicroGel Extreme & Extreme Pro Total String Length:

11 m/36,5 ft

String Pattern:




RECOMMENDED STRING TENSION: 26 – 30 kp / 57 – 67 lbs

The Main Strings Start at the bottom with the centre holes L1 + R1. For the left and the right

side of the main strings clamp 3m (10ft) each at hole L1 and R1 respectively. Tighten 2 main strings left, two main strings right and so on, skipping holes

L8 +R8 as well as L28 + R28. Tie off at holes L6 + R6. The Cross Strings

For the cross string measure 5 m (16,5 ft) string. Tie on the cross strings at hole R29 and lace string through hole L28. Tighten all 19 cross strings in

direction of racquet throat. Tie off at hole L11.

Flexpoint.Prestige MID Total String Length: 11 m/36,5 ft String Pattern:




The Main Strings Start at the top with the center holes L38 and R38. For the left side of the

main strings clamp 3m (10ft) at hole R38. Tighten 2 main strings right, two main strings left and so on, skipping holes L+R31, L+R29 as well as L+R8

and L+R10. Tie off at holes L+R7. The Cross Strings

Tie on the cross strings at hole R 33 and lace string through hole R31. Tighten all 20 cross strings in direction of racquet throat. Tie off at hole R7.

Flexpoint.Prestige MID PLUS Total String Length: 11,5m/38 ft

String Pattern: 18 main strings (6,3m/21ft)

20 cross strings (5,2m /17ft) For optimum performance use HEAD FXP Strings



Start at the top with the center holes L38 and R38. For the left side of the main strings clamp 3m (10ft) at hole L38 and R38. Tighten 2 main strings

right, two main strings left and so on, skipping holes L+R31, L+R29 as well as L+R9. Tie off at holes L+R7.

The Cross Strings Tie on the cross strings at hole R 33 and lace string through hole R31.


Flexpoint Radical MP Total String Length:

11 m/36,5 ft

String Pattern:



We recommend two piece stringing with Flexpoint 17. RECOMMENDED STRING TENSION:

26 – 30 kp / 57 – 67 lbs




hole R 33 and lace string through hole R31. Tighten all 20 cross strings in direction of racquet throat. Tie off at hole R7.

Flexpoint Radical MP Tour Total String Length:

11 m/36,5 ft

String Pattern:



We recommend two piece stringing with Flexpoint 17.


24 – 28 kp / 54 – 58 lbs The Main Strings

Start at the buttom with the center holes L1 + R1. For the left and the right side of the main strings clamp 3m (10ft) each at hole L1 and R1 respectively.



hole L 31 and lace string through hole L 29. Tighten all 19 cross strings in direction of racquet throat. Tie off at hole R6.

Flexpoint Radical OS Total String Length:

11 m/36,5 ft

String Pattern:



We recommend two piece stringing with Flexpoint 17. RECOMMENDED STRING TENSION:

27 – 31 kp / 58 – 68 lbs



The Cross Strings


Flexpoint Instinct Total String Length:

11 m/36,5 ft

String Pattern:


19 cross strings (5 m /16,5ft)




Start at the top with the center holes L37 + R37. For the left and the right side of the main strings clamp 3m (10ft) each at hole L37 + R37

respectively. Tighten 2 main strings left, two main strings right and so on, skipping holes L8 + R8, L10 + R10, L28 + R28 as well as L30 + R30. Tie off at holes L9 + R9.

The Cross Strings

For the cross string measure 5 m (16,5 ft) string. Tie on the cross strings at hole L32 and lace string through hole L30. Tighten all 19 cross strings in direction of racquet throat. Tie off at hole R7.

MG.Extreme TEAM

with Teflon® polymer



19 Cross (5 m / 16,5 ft)


Main Strings Start at the bottom with the centre holes L1+R1. For the left and the right

side of the main strings clamp 3 m (10 ft) each at hole L1+R1 respectively. Tighten 2 main strings left, two main strings right and so on, skipping holes L8+R8 as well as L28+R28. Tie off at holes L6+R6.

Cross Strings

For the cross string measure 5 m (16,5 ft) string. Tie on the cross strings at hole R29/L29 and lace string through hole L28/R28. Tighten all 19 cross strings in direction of racquet throat. Tie off at hole L11/R11.


MicroGel Extreme TEAM Total String Length:

11 m/36,5 ft

String Pattern:






Start at the bottom with the centre holes L1 + R1. For the left and the right side of the main strings clamp 3m (10ft) each at hole L1 and R1 respectively.

Tighten 2 main strings left, two main strings right and so on, skipping holes L8 +R8 as well as L28 + R28. Tie off at holes L6 + R6.


hole R29 and lace string through hole L28. Tighten all 19 cross strings in direction of racquet throat. Tie off at hole L11.

MicroGel Radical TEAM Total String Length:

11 m/36,5 ft

String Pattern:







Tighten 2 main strings left, two main strings right and so on, skipping holes L8 +R8 as well as L28 + R28. Tie off at holes L6 + R6.


hole R29 and lace string through hole L28. Tighten all 19 cross strings in direction of racquet throat. Tie off at hole L11.

MicroGel MOJO Total String Length 11 m (36,5 ft)

String Pattern:

18 main strings

(6 m / 20 ft)

19 cross strings

(5 m / 16.5 ft) For optimum performance use HEAD Sonic Pro.


The main strings

Start at the top with the centre holes L37 + R37. For the left and right side of the main strings clamp 3 m(10ft) string each at hole L37 and

R37 respectively Tighten two main strings left, two main strings right and so on, skipping L8 + R8, L10 + R10, and L29 + R29. Tie off at

holes L9 + R9.

The cross strings For the cross strings measure 5 m (16,5 ft) string. Tie on the strings at

hole R32 and lace string through hole R29.Tighten all 19 cross strings in direction of racquet throat. Tie off at hole L7.

MicroGel MONSTER Total String Length:

11 m/36,5 ft

String Pattern:







respectively. Tighten 2 main strings left, two main strings right and so on, skipping holes L8 +R8 as well as L28 + R28. Tie off at holes L29 + R29.


hole L30 and lace string through hole L28. Tighten all 19 cross strings in direction of racquet throat. Tie off at hole R7.

MicroGel RAPTOR MP Total String Length: 11 m/36,5 ft String Pattern:




The Main Strings Start at the top with the center holes L35 + R35. For the left and the right

side of the main strings clamp 3m (10ft) each at hole L35 + R35 respectively. Tighten 2 main strings left, two main strings right and so on,

skipping holes L8 +R8 as well as L28 + R28. Tie off at holes L29 + R29. The Cross Strings

For the cross string measure 5 m (16,5 ft) string. Tie on the cross strings at hole L30 and lace string through hole L28. Tighten all 19 cross strings in

direction of racquet throat. Tie off at hole R7.

MicroGel RAPTOR OS Total String Length:

11 m/36,5 ft

String Pattern:






Start at the throat with the center holes L1 + R1. For the left and the right side of the main strings clamp 3m (10ft) each at hole L1 + R1 respectively.



hole R 30 and lace string through hole R28. Tighten all 19 cross strings in direction of racquet throat. Tie off at hole L6.

MicroGel Prestige TEAM Total String Length 11 m (36,5 ft) String Pattern:

18 main strings (6 m / 20 ft) 19 cross strings

(5 m / 16.5 ft)

For optimum performance use HEAD FXP Strings RECOMMENDED STRING TENSION:

26 +/- 2kp / 57 +/- 5lbs

The main strings Start at the top with the centre holes L37 + R37. For the left and right side of the main strings clamp 3 m(10ft) string each at hole L37 and R38

respectively Tighten two main strings left, two main strings right and so on, skipping L8 + R8, L10 + R10, and L29 + R29. Tie off at holes L9 + R9.

The cross strings For the cross strings measure 5 m (16,5 ft) string. Tie on the strings at hole

R30 and lace string through hole R29.Tighten all 19 cross strings in direction of racquet throat. Tie off at hole L7.

Flexpoint.Radical TEAM Int. Total String Length 11 m (36,5 ft) String Pattern:


(5 m / 16.5 ft)


26 +/- 2kp / 57 +/- 5lbs




R30 and lace string through hole R29.Tighten all 19 cross strings in direction of racquet throat.

Tie off at hole L7.

FXP.Prestige TEAM Total String Length 11 m (36,5 ft) String Pattern:


(5 m / 16.5 ft)


26 +/- 2kp / 57 +/- 5lbs





FXP.Instinct TEAM Total String Length:

11 m/36,5 ft

String Pattern:









hole R 30 and lace string through hole R28. Tighten all 19 cross strings in direction of racquet throat. Tie off at hole L6.

Special Stringing Instructions for all CrossBow and Airflow CB Racquets

Cutting out the Strings:

When cutting the strings out of a CrossBow racquet, never cut all the cross strings first.

The best way is to cut the mains and crosses alternately. This is better for the integrity of

all racquets.

Stringing Adapters:

HEAD CrossBow Racquets feature a unique aerodynamically shaped frame. The pressure

created by the center post on some stringing machines may be excessive for this new

shape. In order to protect the aerodynamic cross-section of the frame, the use of the

supplied CrossBow Adapter is mandatory! This Crossbow Adapter is for use on ANY

machine where the center post touches the racquet at 12 o’clock.

A: Stringing on 6 or 4 point mounting systems

Mounting on a 6 or 4 point mounting systems:

Make sure that the TIE OFF CROSS-mark is to the left hand side of the 12 o’clock-

mounting and use the Stringing Adapter as described in the instructions supplied with the

adapter.

CrossBow 10 / Airflow 3 CB

1. Main Strings:

Start at the throat with the centre holes L1 + R1. For the left and the right side of the

main strings clamp 3 m each at hole L1 + R1 respectively. Tighten 2 main strings left, 2

main strings right and so on, skipping holes L8 + R8, L27 + R27 as well as L29 + R29.

Tie off at holes L7 + R7.

2. Cross Strings:

For the cross string measure 5 m string. Tie on the cross strings only at hole L31 possible

and lace string through hole L29 (follow this direction because of the lateral Twin-

Grommets). Tighten all 19 cross strings in direction of racquet throat. Tie off at hole R6.

CrossBow 6 / Airflow 7 CB / Airflow 3 CB

1. Main Strings:

Start at the throat with the centre holes L1 + R1. For the left and the right side of the

main strings clamp 3 m each at hole L1 + R1 respectively. Tighten 2 main strings left, 2

main strings right and so on, skipping holes L7 + R7, L9 + R9, L27 + R27 as well as L29

+ R29. Tie off at holes L8 + R8.

2. Cross Strings:

For the cross string measure 5 m string. Tie on the cross strings only at hole L31 possible

and lace string through hole L29 (follow this direction because of the lateral Twin-

Grommets). Tighten all 19 cross strings in direction of racquet throat. Tie off at hole R6.

CrossBow 10 / Airflow 3 CB CrossBow 6 / Airflow 7 CB / Airflow 5 CB

B: Stringing on 2 or 4 point mounting systems

In order to protect the racquet, CrossBow and Airflow CB racquets require a special mounting

process and special “Around the World” stringing pattern* on stringing machines with a 2 or 4

point mounting system. This protects the throat of the racquet and eliminates any stress to

the CrossBow created during the stringing process. If the machine’s center post at 12 o’clock

touches the racquet, please be sure to use the CrossBow Adapter as described above.

* This special “Around the World” pattern requires a Starting Clamp.

Mounting on a 2 or 4 point mounting systems:

1) Mount the racquet as normal on machine at 12 o’clock. Use the CrossBow Adapter

supplied with the racquet if the center post touched the racquet.

a. NOTE: Make sure that the tie off for the cross string at the top is on the left

side. This is marked on the racquet.

2) Do NOT mount the racquet on the throat piece at the bottom. Instead, mount the

racquet against the shaft at the bottom just above the grip (see figure 1)

a. NOTE: Be sure to use the correct machine adaptors on this area and put a pad

between the metal and the racquet in order to protect the racquet’s paint.

3) String racquet using the pattern below

Stringing on a 2 or 4 point mounting systems:

1) Two Piece Stringing Required

a. Measure 5,80 m for the Mains

b. Measure 4,60 m for the CrossBow 10 crosses or 4,30 m for all other CrossBow

or Airflow CB crosses

2) Start the mains in the center of the throat. Feed 3,20 m of string from L1 to L35 and

place the machine’s left clamp at L1. Feed 2,70 m of string from R1 to R35.

3) Pull tension on the 1st right main string and place a starting clamp on the string

against the frame on the outside of the frame at R35. (see figure 2)

a. Note: This will allow the removal of the machine’s main string clamp so

installation of the bottom two cross strings is possible.

4) Install the first 6 main strings on the left side of the racquet (see figure 3)

a. Do NOT install any strings at this time on the right side.

5) Install the bottom cross string with the string on the left side.

6) Install the 2nd cross string from the bottom (see figure 4)

7) Install the 7th main string on the left side

8) Re-pull tension on the 1st main on the right side again & replace the starting clamp

with the standard machine clamp on the right side.

9) Continue with the remaining main strings on the right side (2-8) and tie off where

marked.

10) Install the 8th main on the left side and tie off

11) Now you have all the main strings completed and the bottom 2 cross strings (see

figure 5)

12) Install the remaining Cross Strings from the TOP down.

a. NOTE: Crosses must begin at the head on the same side as the marked tie off

hole. This insures that the strings will match the grommets at 3 & 9 o’clock.

b. NOTE: The first Cross at the top MUST BE the opposite weave as the 2nd last

cross at the bottom. This insures that the weave will match when you get to

the bottom.

13) Finish the crosses and tie off as marked.

Figure 1 Mounting on a 2 or 4 point machine

Figure 2 Figure 3 Start the mains & measure string Install left side mains

Figure 4 Figure 5 Install the bottom 2 cross string Finish mains & tie off

CrossBow 10 / Airflow 3 CB CrossBow 6 / Airflow 7 CB / Airflow 5 CB

Racquet Length M x X [cm]

Tension KP

Pattern M x X

Start Mains

Mains Skip

Tie Off Mains

Tie Off Crosses

CrossBow 10 590 x 460 24-28 16 x 19 L1 R1 L/R8, L/R27, L/R29 L/R7 L31, R6

CrossBow 6 590 x 440 24-28 16 x 19 L1 R1 L/R7, L/R9, L/R 27,

L/R 29

L/R8 L31, R6

Airflow 7 CB 590 x 440 21-25 16 x 19 L1 R1 L/R7, L/R9, L/R 27,

L/R 29

L/R8 L31, R6

Airflow 5 CB 590 x 440 21-25 16 x 19 L1 R1 L/R7, L/R9, L/R 27,

L/R 29

L/R8 L31, R6

Airflow 3 CB 590 x 440 21-25 16 x 19 L1 R1 L/R8, L/R27, L/R29 L/R7 L31, R6

Metallix.2 Total String Length:

11 m/36,5 ft

String Pattern:



For optimum performance use HEAD FXP.Power







Stabilizer: Please pull the string underneath the stabilizer bridge and not over!


11 m/36,5 ft

String Pattern:












11 m/36,5 ft

String Pattern:






Start at the throat with the centre holes L1 + R1. For the left and the right side of the main strings clamp 3m (10ft) each at hole L1 + R1 respectively.

Tighten 2 main strings left, two main strings right and so on, skipping holes L8 +R8, L27 + + R27 as well as L29 + R29 Tie off at holes L6 + R7.




Airflow 1 Total String Length:

11 m/36,5 ft String Pattern:


For optimum performance use HEAD Control Strings!


The Main Strings Start at the throat with the centre holes L1 + R1. For the left and the right

side of the main strings clamp 3m (10ft) each at hole L1 + R1 respectively. Tighten 2 main strings left, two main strings right and so on, skipping holes L8 +R8, L27 + R27 as well as L29 + R29. Tie off at holes L6 + R7.

The Cross Strings

For the cross string measure 5 m (16,5 ft) string. Tie on the cross strings at hole L31 and lace string through hole L29. Tighten all 19 cross strings in direction of racquet throat. Tie off at hole R6.

Air Flow 3 Total String Length:

11 m/36,5 ft

String Pattern:











11 m/36,5 ft

String Pattern:










Flexpoint.1 OS Total String Length:

11 m/36,5 ft

String Pattern:








The Cross Strings


Flexpoint.1 MP Total String Length:

11 m/36,5 ft

String Pattern:



For optimum performance use HEAD FXP String







Flexpoint 4 Total String Length:

11 m/36,5 ft

String Pattern:






Start at the top with the centre holes L35 + R35. For the left and the right side of the main strings clamp 3m (10ft) each at hole L35 + R35




Flexpoint 6 MP Total String Length:

11 m/36,5 ft

String Pattern:



We recommend two piece stringing with Flexpoint 16.


26 – 30 kp / 57 – 67 lbs The Main Strings

Start at the top with the center holes L35 + R35. For the left and the right side of the main strings clamp 3m (10ft) each at hole L1 and R1 respectively.



hole L 30 and lace string through hole L 28. Tighten all 19 cross strings in direction of racquet throat. Tie off at hole R29.

Flexpoint 6 OS Total String Length:

11 m/36,5 ft

String Pattern:



For optimum performance use Flexpoint 16






hole R30 and lace string through hole R28. Tighten all 19 cross strings in direction of racquet throat. Tie off at hole L7.

Flexpoint 10 Total String Length:

11 m/36,5 ft

String Pattern:



For optimum performance use Flexpoint 16






hole R30 and lace string through hole R27. Tighten all 19 cross strings in direction of racquet throat. Tie off at hole L7.

Flexpoint.Fire Total String Length:

11 m/36,5 ft

String Pattern:










Flexpoint.Heat Total String Length 11 m (36,5 ft) String Pattern:


(5 m / 16.5 ft)

For optimum performance use HEAD FXP String RECOMMENDED STRING TENSION:

26 +/- 2kp / 57 +/- 5lbs





Protector MP Total String Length:

11 m/36,5 ft

String Pattern:



For optimum performance use HEAD Protector 16L


The Main Strings Start at the top with the centre holes L35 + R35. For the left and the right

side of the main strings clamp 3m (10ft) each at hole L35 + R35 respectively. Tighten 2 main strings left, two main strings right and so on, skipping holes L8 +R8. Tie off at holes L29 + R29.

The Cross Strings

For the cross string measure 5 m (16,5 ft) string. Tie on the cross strings at hole L30 and lace string through hole L28. Tighten all 19 cross strings in

direction of racquet throat. Tie off at hole R7.

Protector OS Total String Length:

11 m/36,5 ft

String Pattern:



For optimum performance use HEAD Protector 16L




respectively. Tighten 2 main strings left, two main strings right and so on, skipping holes L8 +R8. Tie off at holes L30 + R30.



YouTek Prestige PRO - d39o10hdlsc638.cloudfront.net Prestige PRO Total String Length: 11 m / 36,5 ft...

Documents

Transcript of YouTek Prestige PRO - d39o10hdlsc638.cloudfront.net Prestige PRO Total String Length: 11 m / 36,5 ft...