123REFERENCES1. Hassim, M. H. (2010). Inherent Occupational Health Assessment in ChemicalProcess Development and Design. Ph.D. Thesis. Aalto University School ofScience and Technology. Finland.2. Moldan, B., Janouskov, S. and Hk, T. (2012). How to understand and measureenvironmental sustainability: Indicators and targets. Ecological Indicators. 17,4 13.3. Hassim, M. H. and Edwards, D. w. (2006). Development of A Methodology forAssessing Inherent Occupational Health Hazards. Process Safety andEnvironmental Protection. 84(B5): 378390.4. Hassim, M.H., Grnlund, M., Hurme, M. (2008) Inherent EHS considerations inprocess development, Chem. Eng. Trans. 13, 295-302.5. Adu, I. K., Sugiyama, H., Fischer, U. and Hungerbuhler, K. (2007). Comparisonof methods for assessing environmental, health and safety (EHS) hazards inearly phases of chemical process design. Process safety and environmentalprotection. 86, 77 93.6. Siche, J.R., Agostinho, F., Ortega, E. and Romeiro, A. (2008). Sustainability ofnations by indices: Comparative study between environmental sustainabilityindex, ecological footprint and the emergy performance indices. EcologicalEconomics. 66, 628 637.7. Pan, T. -C and Kao J. -J (2009). Inter-generational equity index for assessingenvironmental sustainability: An example on global warming. EcologicalEconomics. 9, 725731.8. Heikkil, A. -M. (1999). Inherent safety in process plant design An index basedapproach. Ph.D. Thesis. Helsinki University of Technology. Espoo, Finland.9. Shariff, A. M., Leong, C. T. and Zaini, D. (2012). Using process stream index(PSI) to assess inherent safety level during preliminary design stage. SafetyScience. 50, 10981103.12410. Clarke, D. M. (2008). A Tribute to Trevor Kletz. Journal od System Safety. Vol.44, 1-5.11. Leong, C. T. and Shariff, A. M. (2008). Inherent safety index module (ISIM) toassess inherent safety level during preliminary design stage. Process safety andenvironmental protection. 86, 113119.12. Hurme, M. and Rahman, M. (2005). Implementing inherent safety throughoutprocess lifecycle. Loss Prevention in the Process Industries. 18, 238244.13. Amyotte, P. R., Pegga, M. J. and Khan, F. I. (2009). Application of inherentsafety principles to dust explosion prevention and mitigation. process safetyand environment protection. 87, 3539.14. Hansson, S. O. (2010). Promoting inherent safety. Process Safety andEnvironmental Protection. 88, 168172.15. Gupta, J. P. and Edwards, D. W. (2002). Inherently Safer DesignPresent andFuture. Trans IChemE. Vol 80, Part B.16. Heikkil, A.-M., Hurme, M. and Jrvelinen, M. (1996). Safety Considerationsin Process Synthesis. Computers chem. Eng. Vol. 20, S I 15-S 120.17. Palaniappan, C., Srinivasan, R. and Tan, R. (2004). Selection of inherently saferprocess routes: a case study. Chemical Engineering and Processing. 43, 647653.18. Gupta, J. P. and Edwards, D. W. (2003). A simple graphical method formeasuring inherent safety. Hazardous Materials. 104, 1530.19. Shariff, A. M., Rusli, R., Leong, C. T., Radhakrishnana, V. R. and Buanga, A.(2006). Inherent safety tool for explosion consequences study. Loss Preventionin the Process Industries. 19. 409418.20. Hassim, M. H. and Edwards, D. w. (2006). Development of A Methodology forAssessing Inherent Occupational Health Hazards. Process Safety andEnvironmental Protection. 84(B5): 378390.21. Hassim, M.H. and Hurme, M. (2010a). Inherent occupational health assessmentduring process research and development stage. Loss Prevention in the ProcessIndustries. 23, 127138.22. Hassim, M.H. and Hurme, M. (2010b). Inherent occupational health assessmentduring preliminary design stage. Loss Prevention in the Process Industries. 23,476-482.12523. Hassim, M.H. and Hurme, M. (2010c). Inherent occupational health assessmentduring basic engineering stage. Loss Prevention in the Process Industries. 23,260-268.24. Gunasekera, M. Y. and Edwards, D. W. (2003). ESTIMATING THEENVIRONMENTAL IMPACT OF CATASTROPHIC CHEMICALRELEASES TO THE ATMOSPHERE: An Index Method for RankingAlternative Chemical Process Routes. Trans IChemE. Vol 81, Part B.25. Rahman, M., Heikkila, A. -M. and Hurme, M. (2005). Comparison ofinherent safety indices in process concept evaluation. Loss Prevention in theProcess Industries. 18, 327334.26. Hassim, M.H., Grnlund, M. and Hurme, M. (2008). Inherent EHSConsiderations in Process Development. Chem. Eng. Trans. 13, 295-302.27. Rahman, M., Heikkila, A. -M. and Hurme, M. (2005). INHERENTSAFETY INDEX EVALUATION OF METHYL METHACRYLATEPROCESS CONCEPTS. Helsinki University of Technology. Report75.28. Gunasekera, M. Y. and Edwards, D. W. (2006). Chemical process routeselection based upon the potential toxic impact on the aquatic, terrestrial andatmospheric environments. Loss Prevention in the Process Industries. 19, 6069.29. Turton, R., Bailie, R. C., Whiting, W. B. and Shaeiwitz, J. A. (1998). Analysis,Synthesis and Design of Chemical Process. (3rded.). Physical and chemicalengineering sciences: Prentice Hall.30. http://www.uhde.eu/fileadmin/documents/brochures/uhde_brochures_pdf_en_16.pdf.31. www.sbioinformatics.com/design_thesis/Benzene/Benzene_Methods-2520of-2520Production.pdf.32. Mostoufi, N., Ahmadpour, M. and Sotudeh-Gharebagh, R. (2005). Modellingthe Two-Stage Pyrolysis Gasoline Hydrogenation. European Symposium onComputer Aided Process Engineering. 15.33. http://www.gtctech.com/petrochemical-technology/pyrolysis-gasoline-hydrotreating-technology/34. Shell Chemicals (2004). Benzene Product Stewardship Manuel. [Brochure].U.S.A: Responsible Care12635. Hassim, M.H., Prez, A.L., Hurme, M. (2010). Estimation of chemicalconcentration due to fugitive emissions during chemical process design, Proc.Safety Environ. Protect.36 Yang, D., Cheng, Z.-M., Zhang, C.-j., and Yuan, W.-K. (2008). PyrolysisGasoline Hydrogenation in the Second-Stage Reactor: Reaction Kinetics andReactor Simulation. Ind. Eng. Chem. Res. 47, 1051-1057.37 Raseev, S. (2003). Thermal and Catalytic Processes in Petroleum Refining,Marcel, Dekker, Inc, New Yurk.