Your Solution Partner...PICMG 2.30 RC 1.0 -CompactPCI Plus IO Specification Approved : September,...
Transcript of Your Solution Partner...PICMG 2.30 RC 1.0 -CompactPCI Plus IO Specification Approved : September,...
2
BackplanesEnclosures &Components
CabinetsRotary
SwitchesSystem
Platforms
Elma Electronic is a global manufacturer of products for housing
electronic systems.
The company provides everything from components such as modular
enclosures, cabinets and backplanes, up to complete standard or custom
system platforms. Elma also manufactures precision rotary switches.
Short Presentation Elma & ElincomShort Presentation Elma & Elincom
3
BackplanesEnclosures &Components
CabinetsRotary
SwitchesSystem
Platforms
Short Presentation Elma & ElincomShort Presentation Elma & Elincom
4
BackplanesEnclosures &Components
CabinetsRotary
SwitchesSystem
Platforms
Elma Trenew Electronic is represented in The Netherlands by
Elincom Electronics since 1999
Short Presentation Elma & ElincomShort Presentation Elma & Elincom
ELMA Trenew Electronic Germany, Pforzheim
5
BackplanesEnclosures &Components
CabinetsRotary
SwitchesSystem
Platforms
COMPARISONCOMPARISON
Compact PCI Plus/Serial Compact PCI Plus/Serial
vs.vs.
MicroTCAMicroTCA
CompactPCI goes HighCompactPCI goes High--SpeedSpeed
6
BackplanesEnclosures &Components
CabinetsRotary
SwitchesSystem
Platforms
History of PICMG SpecificationsHistory of PICMG Specifications
PICMG 2.0CompactPCI
PICMG 2.16Packet Switching
PICMG 3.0AdvancedTCA
MTCA.0MicroTCA
DATA RATE
TIME2001 20061999 2002 2005
PICMG EXP.0CompactPCI Express
ABANDONED
PICMG 2.30CompactPCI Plus IO
2009
IN DEVELOPMENT
PICMG CPCI S.0
CompactPCI Serial
2009-2010
7
BackplanesEnclosures &Components
CabinetsRotary
SwitchesSystem
Platforms
� An extension to the CPCI Standard which adds following features on the Backplane:
� PCI Express
� SATA
� USB
� ETHERNET
� Development started in January 2008
� PICMG 2.30 RC 1.0 - CompactPCI Plus IO Specification
Approved: September, 2009
� PICMG CPCI S.0 - CompactPCI Serial Specification
Started: April, 2009Planned End: beginning of 2011Actual Status: in balloting phase
CompactPCICompactPCI PlusPlus//SerialSerial –– Short OverviewShort Overview
8
BackplanesEnclosures &Components
CabinetsRotary
SwitchesSystem
Platforms
MTCA
• Use of AMCs as daughter cards not
anymore as mezzanines in ATCA
• Cost reduction:
- Mechanic
- Cooling
- Management
Basic ideasBasic ideas
cPCI Plus/Serial
• Still maintain the parallel cPCI bus
• Use the same cPCI mechanic
• Compared to CPCI adds High-Speed
serial interconnection protocols like
PCIE, SATA, USB, ETHERNET
9
BackplanesEnclosures &Components
CabinetsRotary
SwitchesSystem
Platforms
Overview MechanicOverview Mechanic
MTCA
• New mechanic based on AMC Card
formats
• Smaller physical box size dedicated
for size constrained applications
cPCI Plus/Serial
• Standard cPCI mechanic based on 19”
Technology, meaning unchanged:
� Chassis
� Front Panel
� Handle
� Other accessories
10
BackplanesEnclosures &Components
CabinetsRotary
SwitchesSystem
Platforms
Card FormatCard Format
MTCA
• AMC format with Card Edge Connectors
cPCI Plus/Serial
Several form factors available e.g.:
• Height: 3U or 6U
• Width: 4HP or 8HP
• Based on Eurocard format
• Same format used by standard cPCI
Several form factors available e.g.:
• Single Module or Double Modules
• Compact-(3HP), Mid- (4HP) and
Full-Size (6HP)
11
BackplanesEnclosures &Components
CabinetsRotary
SwitchesSystem
Platforms
MTCA
• No Rear I/O specified
Rear I/ORear I/O
cPCI PLUS/SERIAL
• Rear I/O available
• No Rear I/O by MTCA thereforeAMC - Front I/O Cards used foroffering this feature
12
BackplanesEnclosures &Components
CabinetsRotary
SwitchesSystem
Platforms
MTCA
• No Rear I/O specified
Rear I/ORear I/O
cPCI PLUS
• Rear I/O available
• No Rear I/O by MTCA therefore AMC - Front I/O Cards used foroffering this feature
• Rear I/O available in XTCA
13
BackplanesEnclosures &Components
CabinetsRotary
SwitchesSystem
Platforms
Rear I/O by XTCARear I/O by XTCA
MTCA XTCA
14
BackplanesEnclosures &Components
CabinetsRotary
SwitchesSystem
Platforms
ConnectorConnector
MTCA
• Card Edge AMC connectors:
� Press-fit
� SMD
� Compression mount
cPCI Plus/Serial
• PICMG 2.30 System Slot:
� 3M Connector only on the Card
Module (no change on the
backplane)
� Supports 5Gb/s
� Fully compatible with the standard
cPCI connector on the backplane
15
BackplanesEnclosures &Components
CabinetsRotary
SwitchesSystem
Platforms
ConnectorConnector
cPCI Plus/Serial
• cPCI Plus.0 System Slot, Peripheral Slots
and Rear I/O:
� FCI Airmax Connector supports 12Gb/s and offers 184 pin pairs / 3U Board
� IEEE 1101 compliant
� Very robust and prepared for harsh environment (connector walled on four sides)
� The plug is on the card and the receptacle on the backplane: as in VME bus systems/contrary to cPCI
16
BackplanesEnclosures &Components
CabinetsRotary
SwitchesSystem
Platforms
Electrical Performance and Data RatesElectrical Performance and Data Rates
MTCA
• High speed serial point-to-point
links on the backplane for extremely high
data rates. Supported protocols:
� 10 Gb Ethernet up to 5Gb/s
� PCIE up to 5Gb/s
� SAS/SATA
� Serial Rapid IO
cPCI Plus/Serial
• Migrates from Parallel Bus to modern
Serial Point to Point Topology
Parallel bus structure
Slot 1 Slot 2 Slot 3
Serial Topology
+
17
BackplanesEnclosures &Components
CabinetsRotary
SwitchesSystem
Platforms
Electrical Performance and Data Rates: MTCAElectrical Performance and Data Rates: MTCA
18
BackplanesEnclosures &Components
CabinetsRotary
SwitchesSystem
Platforms
Electrical Performance and Data Rates: CPCI SerialElectrical Performance and Data Rates: CPCI Serial
19
BackplanesEnclosures &Components
CabinetsRotary
SwitchesSystem
Platforms
Electrical Performance and Data Rates: MTCAElectrical Performance and Data Rates: MTCA
MTCA CPCI SERIAL
• 2 x MCH (MTCA Carrier Hard)
• up to 12 AMC (Advance Mezzanine Card)
• PCI-e Switching via MCH
• Use of CPU Boards not limited (AMC1-12)
• Maximum 1 x CPU Board
• No PCI-e Switching
20
BackplanesEnclosures &Components
CabinetsRotary
SwitchesSystem
Platforms
Power ConceptPower Concept
MTCA
• Power Module: should use the
output backplane power connector in
order to distribute radially the payload
+12V and management +3.3V, so that
each load can be managed
independently of the others.
cPCI Plus/Serial
• Power Input: no dedicated
connector, power interface of the cPCI
Plus modules through the slot pins.
• +12V is the main voltage of the
cPCI Serial modules
Power Module from ERICSSON
21
BackplanesEnclosures &Components
CabinetsRotary
SwitchesSystem
Platforms
Power ConceptPower Concept
MTCA
The Power Module should use INPUT
Connectors which support AC or DC
feeds
Power dissipation:
� 48W / Single Modules
� 80W / Double Modules
cPCI Serial / Plus
• Power dissipation: 60W / Slot
• Power supplies +12V OUTPUT shall be used, pluggable or fix mount, but there is not possible to have a 1:1 use of the CPCI standard power supplies
Power connector from ept
BackplanesEnclosures &Components
CabinetsRotary
SwitchesSystem
Platforms
Management (Power and Cards)Management (Power and Cards)
MTCA
• Central management and data
switching via MicroTCA Carrier Hub
• New Power Module with
management functionality necessary
(but other solutions available to reduce
costs)
cPCI Plus
• No central management specified
• All transactions are controlled by CPU
BackplanesEnclosures &Components
CabinetsRotary
SwitchesSystem
Platforms
source
• Radially distrubuted (+12V) payload, each load can be managed independently of the others
• Management power (+3.3V)
Point of loadGain +3.3V management power from +12V
Micro controler
Management for power
module and cooling unit
MTCA Power ManagementMTCA Power Management
24
BackplanesEnclosures &Components
CabinetsRotary
SwitchesSystem
Platforms
MTCA
• Suitable for Telecom applications but
Industrial solutions available as well
• Intelligent management for all FRUs
(Field Replaceable Units), such as the
power module or cooling units
• Hot-swap management of all plug-in
elements
• Various AMCs available
• Rear IO: not available by MTCA
but available in XTCA
• PCI-e Switching
MTCA vs. MTCA vs. cPCIcPCI Plus: ConclusionsPlus: Conclusions
cPCI PLUS/Serial
• For traditional cPCI users with a need to
use high speed protocols
• For user who wants to use proven cPCI
cards and mechanic
• Proven system architecture
• Connector can be used in a rugged
environment
• Rear IO: available
• No PCI-e Switching but Single Star