Your Everyday PANAVIA Improved! - Patterson Dental...Your Everyday PANAVIA Improved! 33 Maiden Lane...
Transcript of Your Everyday PANAVIA Improved! - Patterson Dental...Your Everyday PANAVIA Improved! 33 Maiden Lane...
Your Everyday PANAVIA™
Improved!
33 Maiden Lane · Suite 600-D · New York · NY · 10038 · (800) 879-1676 · kuraraydental.com©2015 Kuraray America Inc.
A Self-Adhesive Resin Cement with the Features of Glass Ionomer and
Kuraray’s Legendary Adhesive Technology
Original MDP Adhesive Monomer
New Chemistry for Stronger Bonds & now with Room Temperature Storage
Fast & Easy Clean-Up
Fluoride-releasing
Shade Selection includes Translucent, Universal and White
Choice of Automix and Handmix
Since 1983, with the introduction of PANAVIA EX resin cement & the original MDP adhesive monomer, Kuraray has provided innovative & exceptional adhesive technologies that have improved the quality of adhesion dentistry.
Now we present PANAVIA SA Cement Plus1; a self-adhesive, dual-cure, fluoride-releasing resin cement upgraded from the original award winning, PANAVIA SA Cement.
1983 First ResinCement
NEW CATALYST CHEMISTRY PROVIDES:
YOUR EVERYDAY PANAVIAPANAVIA SA Cement Plus1 is a dual-cure, self-adhesive resin cement with a unique, fluoride-releasing mechanism that is available in convenient automix or economical handmix syringes.
PANAVIA SA Cement Plus1 provides an outstanding level of adhesion to enamel, dentin, metal, lithium disilicate and zirconia. Bond strengths are virtually unaffected by the dryness or wetness of the tooth structure. These high bond strengths, in combination with its very low water absorption rate, leads to long-lasting marginal integrity for your restorations.
This reliable, self-adhesive cement offers a unique catalyst-controlled setting mechanism which provides an easier clean-up technique with shorter chair-time and reduces the possibility of damaging the gingiva.
New PANAVIA SA Cement Plus1 has approximately 35% increase in dentin bond strength and approximately 15% increase in enamel bond strength as shown in durability testing.
Stronger ShearBond Strengths1
Refrigeration is no longer necessary. PANAVIA SA Cement Plus1 has a stable 3-year shelf-life at room temperature (36-77°F).
Stable Room TemperatureStorage
2
0
20
40
60
80
100
120
Simulated 3-Year
Storage at Room
Temperature under 140° F
5-week Acceleration.
Initial
PANAVIA SA Cement Plus Automix
MP
a
A new Radical Amplifier increases the rate of polymerization, shortens the light-curing time, and increases the bond strength.
Faster Light-curingTime (10 seconds)3
Shear Bond Strength to Human Tooth Structure
* Not a trademark of KURARAY Co., Ltd Source: Kuraray Noritake Dental Inc
After 3000 Thermal Cycles
0
5
10
15
20
Dentin
Enamel
Unicem 2Automix*
PANAVIA SACementAutomix
PANAVIA SACement Plus
Automix
MP
aKuraray Noritake Dental Inc.
3M ESPE
Flexural Strength After an A Simulated 3-year Storage at Room Temperature under 140°F 5- Week Acceleration**
** Test was conducted under an acceleration to approximately a 3-year wear (140° F, 5 week) Source: Kuraray Noritake Dental Inc
1 Denotes both PANAVIA SA Cement Plus Automix and PANAVIA SA Cement Plus Handmix
Universal (A2)
WhiteImage may appear slightly
different from actual product
1 Denotes both PANAVIA SA Cement Plus Automix and PANAVIA SA Cement Plus Handmix
For Precise PlacementEvery Time!
FAST AND EASY ENDO TIPPANAVIA SA Cement Plus1 offers the same easy clean-up as its predecessor.
360º rotation
auto-mixing tip
long & �nenozzle
Photo by courtesy ofProf. Dr. M. Ferrari, Livorno
z
CHEMICAL BONDING TO ZIRCONIA:Multiple research studies over the past 20-years have shown that obtaining a strong, durable bond to zirconia can be difficult. PANAVIA SA Cement Plus1, with its high concentration of MDP, bonds to zirconia chemically as well as micro-mechanically, which provides you with additional strength and comfort.The graph below illustrates this point by showing the bond strength results if zirconia is only ground with #1,000 grit silcon carbide paper instead of sandblasting.NEW CATALYST CHEMISTRY PROVIDES:
3 SHADES
0
5
10
15
20
25
30
3,000 TC
37° 1 Day
Unicem 2Automix*
PANAVIA SACementAutomix
PANAVIA SACement Plus
Automix
MP
a
Kuraray Noritake Dental Inc. 3M ESPE
“ ” …regardless of the conditioning methods, MDP-monomer based cements presented the most favorable bond values compared to those of other resin cements.
+2011, IADR Abstract 374, M. ÖZCAN, Center for Dental and Oral Medicine, Dental Materials Unit, University of Zurich, Zurich, Switzerland, and M. BERNASCONI, University of Zurich, Center for Dental and Oral Medicine, Dental Materials Unit, Clinic for Fixed and Removable Prosthodontics, Zurich, Switzerland
Systematic Review of Adhesion Studies on Zirconia+
Based on Research gathered over 15 years:
EXCEPTIONAL ZIRCONIA BOND STRENGTHS
Photos courtesy of Dr. Kato, Takanawa Dent.
* Not a trademark of KURARAY Co., Ltd Source: Kuraray Noritake Dental Inc
Ground Zirconia (#1,000 grit, KATANA Zirconia HT / Not Sandblasted)
NEW SHADE
EXCEPTIONAL ZIRCONIA BOND STRENGTHS
Translucent
Warranty: Kuraray Noritake Dental Inc. will replace any product that is proved to be defective. Neither Kuraray Noritake Dental Inc. nor the distributor accepts liability for any loss or damage, direct, consequential or special, arising out of the application or use of or the inability to use these products. Before using, the user should determine the suitability of the products for the intended use and the user assumes all risk and liability whatsoever in connection therein. PANAVIA™ SA Cement Plus and Kuraray Noritake Dental Inc. products are available only through Kuraray Authorized dealers."KATANA" and "Zirprime" are trademarks of NORITAKE CO., LIMITED. “CLEARFIL” and “PANAVIA” are trademarks of KURARAY Co.,Ltd.
PANAVIA SA Cement Plus1 can be used with all current popular materials:
• Zirconia (e.g. Zirprime, KATANA Zirconia, BruxZir* Solid Zirconia)• Feldspathic porcelain• Lithium disilicate (e.g. IPS e.max*)
• Leucite reinforced glass ceramic (e.g. IPS Empress*)• Metal• Composite resin
Crowns Onlays/Inlays Bridges Posts Implant Abutments
Maintain isolation for 5 minutes.3Light-cure for 2 to 5 seconds or chemical-cure for 2 to 4 minutes,
then remove the excess cement. 2Place the crown.1
º Prepare the abutment tooth 10 minutes after > For HANDMIX option, mixing is required.Please refer to the PANAVIA SA Cement PlusHandmix IFU.
placing the dental post.
Place the core buildup composite resin.º4Spread the excess paste over
the coronal base and post head.Light-cure the margins of the post.
3Place the post quickly into the cavity, slightly vibrating it to prevent air bubbles from entering the root canals.
2Apply over the entire adherent surface of the post, or the entire tooth surface within the cavity.
1
CEMENTATION OF CROWNS
CEMENTATION OF POSTS
PANAVIA SA Cement PlusAutomix#3382KA Universal (A2)#3383KA White#3384KA TranslucentContent: 1 syringe: • Paste A and B: 8.0 g (4.6 ml)Mixing Tip: 20 tips
PANAVIA SA Cement Plus Automix: VALUE KIT#3385KA Universal (A2)#3387KA TranslucentContent: 3 syringes: • Paste A and B: 8.0 g (4.6 ml) Mixing Tip: 2 x 20 tipsEndo Tip (SS): 10 tips
Manufactured by
1621 Sakazu, Kurashiki, Okayama 710-0801, Japan
#3382LT
* Not a trademark of KURARAY Co., Ltd
1 Denotes both PANAVIA SA Cement Plus Automix and PANAVIA SA Cement Plus Handmix
ORDERING INFORMATIONPANAVIA SA Cement Plus
Automix: Accessories
#3392KAEndo Tip (SS)
(20 PCS)
#3391KAMixing Tip
(20 PCS)
PANAVIA SA Cement Plus Handmix#3352KA Universal (A2)#3353KA White#3354KA TranslucentContent: 1 syringe:• Paste A and B: 9.3 g (5.0 ml)