You must include BS identifier Committeeshop.bsigroup.com/upload/278370/BSI-standards-being...BS 143...

Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee

of 60 June 2016

BS identifier Title Committee Status Final Review Outcome

BSI Shade chart

Methods of measuring the performance of household electrical appliances -- Methods of measuring the performance of household electrical appliances. Shade chart for the assessment of browning

CPL/59 Confirmed (2012)

Reconfirm

BSI Shade gauge

Methods of measuring the performance of household electrical appliances -- Methods of measuring the performance of household electrical appliances. Shade gauge for the assessment of browning


Reconfirm

BS 46-3:1951 Keys and keyways and taper pins -- Specification for solid and split taper pins for general engineering purposes

FME/9 Confirmed (2012)

Reconfirm

BS 67:1987 Specification for ceiling roses CPL/34/2 Confirmed (2012)

Reconfirm

BS 84:2007 Parallel screw threads of Whitworth form. Requirements


Reconfirm

BS 122-1:1953 Specification for milling cutters and reamers -- Milling cutters

MTE/18 Confirmed (2012)

Reconfirm

BS 143 and 1256:2000

Threaded pipe fittings in malleable cast iron and cast copper alloy

ISE/110 Confirmed (2012)

Reconfirm

BS 185:Index:1973

Glossary of aeronautical and astronautical terms -- Alphabetical index

ACE/1 Confirmed (2012)

Reconfirm

BS 185-1:1969 Glossary of aeronautical and astronautical terms -- General


Reconfirm

BS 185-2:1969 Glossary of aeronautical and astronautical terms -- Motion of aircraft


Reconfirm

BS 185-3:1969 Glossary of aeronautical and astronautical terms -- Structures


Reconfirm

BS 185-4:1969 Glossary of aeronautical and astronautical terms -- Aerodynamics


Reconfirm

BS 185-5:1969 Glossary of aeronautical and astronautical terms -- Heavier-than-air aircraft (aerodynes)


Reconfirm

BS 185-6:1970 Glossary of aeronautical and astronautical terms -- Ballistic and guided missiles


Reconfirm

BS 185-7:1969 Glossary of aeronautical and astronautical terms -- Lighter-than-air aircraft (aerostats)


Reconfirm

BS 185-8:1970 Glossary of aeronautical and astronautical terms -- Power plant


Reconfirm

BS 185-9:1970 Glossary of aeronautical and astronautical terms -- Propellers


Reconfirm

BS 185-10:1970

Glossary of aeronautical and astronautical terms -- Auxiliary services


Reconfirm

BS 185-13:1972

Glossary of aeronautical and astronautical terms -- Air-traffic and ground services


Reconfirm

BS 185-14:1972

Glossary of aeronautical and astronautical terms -- Radiocommunication and radiolocation


Reconfirm

BS 185-15:1972

Glossary of aeronautical and astronautical terms -- Meteorology


Reconfirm

BS 185-16:1973

Glossary of aeronautical and astronautical terms -- Personnel


Reconfirm

BS 185-17:1973

Glossary of aeronautical and astronautical terms -- Aerospace medicine


Reconfirm

BS 185-18:1970

Glossary of aeronautical and astronautical terms -- Astronautics


Reconfirm


of 60 June 2016


BS 188:1977 Methods for determination of the viscosity of liquids PTI/13 Confirmed (2012)

Reconfirm

BS 302-5:1987 Stranded steel wire ropes -- Specification for ropes for hauling purposes

MHE/2 Confirmed (2012)

Withdraw

BS 325:1947 Specification for black cup and countersunk bolts and nuts


Reconfirm

BS 341-3:2002 Transportable gas container valves -- Valve outlet connections

PVE/3/1 Confirmed (2012)

Reconfirm

BS 376-1:2012 Railway signalling symbols -- Specification for schematic symbols

GEL/9/1 Current Reconfirm

BS 405:1987 Specification for uncoated expanded metal carbon steel sheets for general purposes


Reconfirm

BS 417-2:1987 Specification for galvanized low carbon steel cisterns, cistern lids, tanks and cylinders -- Metric units

B/504 Confirmed (2012)

Reconfirm

BS 419:1966 Specification for varnished fabrics and tapes for electrical purposes

GEL/15/7 Confirmed (2012)

Reconfirm

BS 426:1969 Specification for fixed centres for use on machine tools and in other applications


Reconfirm

BS 434-2:2006 Bitumen road emulsions -- Code of practice for the use of cationic bitumen emulsions on roads and other paved areas

B/510/2 Confirmed (2012)

Reconfirm

BS 450:1958 Specification for machine screws and machine screw nuts (B.S.W. & B.S.F. threads)


Reconfirm

BS 463-1:1958 Specification for sockets for wire ropes -- Inch units MHE/2 Confirmed (2012)

Reconfirm

BS 463-2:1970 Specification for sockets for wire ropes -- Metric units MHE/2 Confirmed (2012)

Withdraw

BS 469:1995 Specification for railway signalling lamps CPL/34/1 Confirmed (2012)

Reconfirm

BS 470:1984 Specification for inspection, access and entry openings for pressure vessels

PVE/1 Confirmed (2012)

Reconfirm

BS 476-4:1970 Fire tests on building materials and structures -- Non-combustibility test for materials

FSH/21 Confirmed (2012)

Reconfirm

BS 476-11:1982

Fire tests on building materials and structures -- Method for assessing the heat emission from building materials


Reconfirm

BS 476-12:1991

Fire tests on building materials and structures -- Method of test for ignitability of products by direct flame impingement


Reconfirm

BS 476-20:1987

Fire tests on building materials and structures -- Method for determination of the fire resistance of elements of construction (general principles)


Reconfirm

BS 476-22:1987

Fire tests on building materials and structures -- Method for determination of the fire resistance of non-loadbearing elements of construction


Reconfirm

BS 476-32:1989

Fire tests on building materials and structures -- Guide to full scale fire tests within buildings


Reconfirm

BS 489:1999 Specification for turbine lubricants PTI/7 Confirmed (2012)

Reconfirm

BS 499-2C:1999

Welding terms and symbols -- European arc welding symbols in chart form

WEE/1 Confirmed (2012)

Reconfirm

BS 500:2000 Steel sleepers RAE/2 Confirmed (2012)

Reconfirm


of 60 June 2016


BS 546:1950 Specification. Two-pole and earthing-pin plugs, socket-outlets and socket-outlet adaptors

PEL/23 Confirmed (2012)

Reconfirm

BS 546:Supplement No. 1:1960

Specification for plugs made of resilient material PEL/23 Confirmed (2012)

Reconfirm

BS 593:1989 Specification for laboratory thermometers LBI/1/2 Confirmed (2012)

Reconfirm

BS 615:1953 Specification for Kohlrausch flasks LBI/1/2 Confirmed (2012)

Reconfirm

BS 633:1970 Specification for cotton selvedge tapes and webbing for electrical purposes


Reconfirm

BS 643:1970 Specification for white metal ingots for capping steel wire ropes

NFE/27 Confirmed (2012)

Reconfirm

BS 644:2012 Timber windows and doorsets. Fully finished factory-assembled windows and doorsets of various types. Specification

B/538/1 Current Confirm

BS 658:1989 Specification for apparatus for the determination of distillation range (including flasks and receivers)

LBI/1/2 Confirmed (2012)

Reconfirm

BS 675:1953 Specification for sugar flasks LBI/1/2 Confirmed (2012)

Reconfirm

BS 676:1982 Specification for flasks with graduated necks (phenols type)


Reconfirm

BS 692:1990 Specification for meteorological thermometers LBI/1/2 Confirmed (2012)

Reconfirm

BS 701:1953 Specification for brewers' mash flask LBI/1/2 Confirmed (2012)

Reconfirm

BS 714:1950 Specification. Cartridge fuse-links for use in railway-signalling circuits


Reconfirm

BS 718:1991 Specification for density hydrometers LBI/1/2 Confirmed (2012)

Reconfirm

BS 733-2:1987 Pyknometers -- Methods for calibration and use of pyknometers


Reconfirm

BS 749:1969 Specification for underfeed stokers RHE/22 Confirmed (2012)

Reconfirm

BS 750:2012 Specification for underground fire hydrants and surface box frames and covers

FSH/17/8 Current Confirm

BS 753:1987 Schedule for density-composition tables for aqueous solutions of sulphuric acid


Reconfirm

BS 756:1952 Specification for Dean and Stark apparatus LBI/1/2 Confirmed (2012)

Reconfirm

BS 764:1990 Specification for automatic change-over contactors for emergency lighting systems


Reconfirm

BS 768:1958 Specification for slotted grub screws FME/9 Confirmed (2012)

Reconfirm

BS 778:1966 Specification for steel pipes and joints for hydraulic purposes

MCE/18 Confirmed (2012)

Reconfirm

BS 791:1990 Specification for solid-stem calorimeter thermometers LBI/1/2 Confirmed (2012)

Reconfirm

BS 807:1955 Specification for spot welding electrodes WEE/29 Confirmed (2012)

Reconfirm

BS 852:1939 Specification for toolmakers' straightedges TDW/4 Confirmed (2012)

Reconfirm


of 60 June 2016


BS 855:1990 Specification for welded steel boilers for central heating and indirect hot water supply (rated output 44 kW to 3 MW)

RHE/10 Confirmed (2012)

Reconfirm

BS 856:1969 Specification for wing nuts FME/9 Confirmed (2012)

Reconfirm

BS 857:1967 Specification for safety glass for land transport AUE/1 Confirmed (2012)

Reconfirm

BS 869:1978 Specification for toolmakers' flats and high precision surface plates

TDW/4 Confirmed (2012)

Reconfirm

BS 903-0:2012 Physical testing of rubber -- General PRI/22 Current Confirm

BS 906-1:1972 Specification for engineers' parallels -- Metric units TDW/4 Confirmed (2012)

Reconfirm

BS 906-2:1972 Specification for engineers' parallels. -- Imperial units TDW/4 Confirmed (2012)

Reconfirm

BS 919-1:2007 Screw gauge limits and tolerances -- Specification for gauges for screw threads of unified form


Reconfirm

BS 919-2:2007 Screw gauge limits and tolerances -- Specification for gauges for screw threads of Whitworth and B.A. forms


Reconfirm

BS 919-3:2007 Screw gauge limits and tolerances -- Specification for gauges for screw threads of ISO metric form


Reconfirm

BS 919-4:2007 Screw gauge limits and tolerances -- Limits of size for gauges for screw threads of unified form diameters 1/4 in and larger


Reconfirm

BS 939:2007 Engineers' squares (including cylindrical and block squares). Specification


Reconfirm

BS 946:1970 Method for the designation of yarns TCI/24 Confirmed (2012)

Reconfirm

BS 950-1:1967 Specification for artificial daylight for the assessment of colour -- Illuminant for colour matching and colour appraisal


Reconfirm

BS 958:1968 Specification for spirit levels for use in precision engineering


Reconfirm

BS 975:1987 Schedule for density-composition tables for aqueous solutions of nitric acid


Reconfirm

BS 976:1987 Schedule for density-composition tables for aqueous solutions of hydrochloric acid


Reconfirm

BS 1016-1:1973

Methods for analysis and testing of coal and coke -- Total moisture of coal

PTI/16 Confirmed (2012)

Reconfirm

BS 1016-10:1977

Methods for analysis and testing of coal and coke -- Arsenic in coal and coke


Reconfirm

BS 1016-14:1963

Methods for analysis and testing of coal and coke -- Analysis of coal ash and coke ash


Reconfirm

BS 1016-100:1994

Methods for analysis and testing of coal and coke -- General introduction and methods for reporting results


Reconfirm

BS 1016-107.3:1990

Methods for analysis and testing of coal and coke. Caking and swelling properties of coal -- Determination of swelling properties using a dilatometer


Reconfirm


of 60 June 2016


BS 1016-107.2:1991

Methods for analysis and testing of coal and coke. Caking and swelling properties of coal -- Assessment of caking power by Gray-King coke test


Reconfirm

BS 1016-108.2:1992

Methods for analysis and testing of coal and coke. Tests special to coke -- Determination of Micum and Irsid indices


Reconfirm

BS 1016-108.5:1992

Methods for analysis and testing of coal and coke. Tests special to coke -- Determination of density and porosity


Reconfirm

BS 1016-108.6:1992

Methods for analysis and testing of coal and coke. Tests special to coke -- Determination of critical air blast value


Reconfirm

BS 1041-2.1:1985

Code for temperature measurement. Expansion thermometers -- Guide to selection and use of liquid-in-glass thermometers


Reconfirm

BS 1041-2.2:1989

Code for temperature measurement. Expansion thermometers -- Guide to selection and use of dial-type expansion thermometers


Reconfirm

BS 1041-3:1989

Temperature measurement -- Guide to selection and use of industrial resistance thermometers


Reconfirm

BS 1041-4:1992

Temperature measurement -- Guide to the selection and use of thermocouples


Reconfirm

BS 1041-5:1989

Temperature measurement -- Guide to selection and use of radiation pyrometers


Reconfirm

BS 1041-7:1988

Temperature measurement -- Guide to selection and use of temperature/time indicators


Reconfirm

BS 1050:1984 Specification for indicator lamps for use in telecommunication apparatus and for allied purposes

CPL/34/1 Confirmed (2012)

Reconfirm

BS 1083:1965 Specification for precision hexagon bolts, screws and nuts (B.S.W. & B.S.F. threads)


Reconfirm

BS 1089:1973 Specification for workhead spindle noses for grinding machines: cylindrical external, internal and universal types


Reconfirm

BS 1098-2:1977

Specification for jig bushes -- Metric units MTE/18 Confirmed (2012)

Reconfirm

BS 1104:1957 Specification for general purpose Acme screw threads


Reconfirm

BS 1123:2006 Fusible plugs for steam boilers and compressed air applications. Specification

PSE/18/6 Confirmed (2012)

Reconfirm

BS 1125:1987 Specification for WC flushing cisterns (including dual flush cisterns and flush pipes)


Reconfirm

BS 1133-7.6:1988

Packaging code. Paper and board wrappers, bags and containers -- Moulded pulp packaging

PKW/0/-/9 Confirmed (2012)

Reconfirm

BS 1133-10.1:1990

Packaging code. Metal containers -- Tins and cans PKW/0/-/8 Confirmed (2012)

Reconfirm

BS 1133-15:1991

Packaging code -- Tensional strapping PKW/0 Confirmed (2012)

Reconfirm

BS 1133-19:1986

Packaging code -- Use of desiccants in packaging PKW/0 Confirmed (2012)

Reconfirm

BS 1133-21:1991

Packaging code -- Regenerated cellulose film, films made of plastics, aluminium foil, flexible multilayer structures and metallized materials

PKW/0 Confirmed (2012)

Reconfirm


of 60 June 2016


BS 1133-22:1989

Packaging code -- Packaging in plastics containers PKW/0/-/10 Confirmed (2012)

Reconfirm

BS 1140:1993 Specification for resistance spot welding of uncoated and coated low carbon steel


Reconfirm

BS 1153:1992 Recommendations for processing and storage of silver-gelatine-type microfilm

IDT/1 Confirmed (2012)

Reconfirm

BS 1157:1975 Recommendations for tapping drill sizes for use with fluted taps


Reconfirm

BS 1161:1977 Specification for aluminium alloy sections for structural purposes


Reconfirm

BS 1188:1974 Specification for ceramic wash basins and pedestals B/503 Confirmed (2012)

Reconfirm

BS 1203:2001 Hot-setting phenolic and aminoplastic wood adhesives. Classification and test method

PRI/52 Confirmed (2012)

Reconfirm

BS 1206:1974 Specification for fireclay sinks: dimensions and workmanship


Reconfirm

BS 1245:2012 Pedestrian doorsets and door frames made from steel sheet. Specification


BS 1254:1981 Specification for WC seats (plastics) B/503 Confirmed (2012)

Reconfirm

BS 1296-1:1970

Specification for single point cutting tools -- Shank sections


Reconfirm

BS 1296-2:1972

Specification for single point cutting tools -- Nomenclature


Reconfirm

BS 1296-3:1978

Specification for single point cutting tools -- Butt-welded cutting tools and blanks


Reconfirm

BS 1296-4:1978

Specification for single point cutting tools -- Ground high speed steel tool bits


Reconfirm

BS 1306:1975 Specification for copper and copper alloy pressure piping systems


Reconfirm

BS 1344-1:1994

Methods of testing vitreous enamel finishes -- Determination of resistance to thermal shock of coatings on articles other than cooking utensils and fabricated sheet steel components

STI/36 Confirmed (2012)

Reconfirm

BS 1344-22:1994

Methods of testing vitreous enamel finishes -- Determination of resistance to thermal shock of coatings for fabricated sheet steel components such as burners and pan supports for cookers


Reconfirm

BS 1362:1973 Specification for general purpose fuse links for domestic and similar purposes (primarily for use in plugs)


Reconfirm

BS 1365:1990 Specification for short-range short-stem thermometers


Reconfirm

BS 1413:1989 Specification for page size for books PAI/43 Confirmed (2012)

Reconfirm

BS 1428-B2:1960

Microchemical analysis. Apparatus for the determination of elements by other than combustion methods -- Specification for ammonia distillation apparatus (Markham)


Reconfirm

BS 1428-D5:1955

Microchemical apparatus. Volumetric analysis -- Specification for syringe pattern micro-pipette


Reconfirm

BS 1435-2:2005

Rubber hose assemblies for oil suction and discharge services -- Recommendations for storage, testing and use


Reconfirm


of 60 June 2016


BS 1446:1973 Specification for mastic asphalt (natural rock asphalt fine aggregate) for roads and footways


Reconfirm

BS 1564:1975 Specification for pressed steel sectional rectangular tanks


Reconfirm

BS 1566-2:1984

Copper indirect cylinders for domestic purposes -- Specification for single feed indirect cylinders


Reconfirm

BS 1574:1994 Specification for split pins (inch series) FME/9 Confirmed (2012)

Reconfirm

BS 1580-1:2007

Unified screw threads -- Screw threads with diameters $9D in and larger. Requirements


Reconfirm

BS 1580-3:2007

Unified screw threads -- Screw threads with diameters below $9D in. Requirements


Reconfirm

BS 1591:1975 Specification for corrosion resisting high silicon iron castings


Reconfirm

BS 1600:1991 Specification for dimensions of steel pipe for the petroleum industry


Reconfirm

BS 1622:1989 Specification for spreaders for winter maintenance B/513 Confirmed (2012)

Reconfirm

BS 1646-4:1984

Symbolic representation for process measurement control functions and instrumentation -- Specification for basic symbols for process computer, interface and shared display/control functions


Reconfirm

BS 1647-1:1984

pH measurement -- Specification for pH scale LBI/16 Confirmed (2012)

Reconfirm

BS 1647-2:1984

pH measurement -- Specification for reference value standard solutions and operational reference standard solutions

LBI/16 Confirmed (2012)

Reconfirm

BS 1655:1950 Specification for flanged automatic control valves for the process control industry (face-to-face dimensions)


Reconfirm

BS 1657:1950 Specification for buttress threads FME/9 Confirmed (2012)

Reconfirm

BS 1660-11:1991

Machine tapers -- Specification for gauges MTE/1 Confirmed (2012)

Reconfirm

BS 1676:1970 Specification for heaters for tar and bitumen (mobile and transportable)


Reconfirm

BS 1679-5:1973

Containers for pharmaceutical dispensing -- Eye dropper bottles


Reconfirm

BS 1679-6:1994

Containers for pharmaceutical dispensing -- Specification for glass medicine bottles


Reconfirm

BS 1679-7:1968

Specification for containers for pharmaceutical dispensing -- Ribbed oval glass bottles


Reconfirm

BS 1679-8:1992

Containers for pharmaceutical dispensing -- Specification for glass and plastics containers for solid dosage forms, semi-solids and powders


Reconfirm

BS 1683:1987 Specification for coated aluminium foil for wrapping processed cheese


Reconfirm

BS 1692:1998 Specification for gin blocks MHE/3/-/6 Confirmed (2012)

Reconfirm

BS 1694:1990 Specification for hospital ward cots for children CH/100 Confirmed (2012)

Reconfirm

BS 1702:1950 Specification for mild steel drums (heavy duty - fixed ends)


Reconfirm


of 60 June 2016


BS 1707:1989 Specification for hot binder distributors for road surface dressing


Reconfirm

BS 1722-4:1986

Fences -- Specification for cleft chestnut pale fences B/201 Current Confirm

BS 1734:1951 Specification for micrometer heads TDW/4 Confirmed (2012)

Reconfirm

BS 1747-5:1972

Methods for the measurement of air pollution -- Directional dust gauges

EH/2 Current Confirm

BS 1748:Parts 11 and 12:1964

Methods for the analysis of copper alloys -- Methods for the determination of copper and lead in leaded bronze alloys


Reconfirm

BS 1748:Parts 1-5:1961

Methods for the analysis of copper alloys -- Methods for the determination of copper, lead, iron, aluminium and nickel in copper alloys


Reconfirm

BS 1748-6:1960

Methods for the analysis of copper alloys -- Method for the determination of tin in copper alloys (nickel coil reduction method)


Reconfirm

BS 1748-7:1960

Methods for the analysis of copper alloys -- Method for the determination of silicon in copper alloys (photometric method)


Reconfirm

BS 1748-8:1960

Methods for the analysis of copper alloys -- Method for the determination of phosphorus in copper alloys (photometric method)


Reconfirm

BS 1748-9:1963

Methods for the analysis of copper alloys -- Method for the determination of zinc in copper alloys


Reconfirm

BS 1759:1969 Specification for knurling wheels MTE/18 Confirmed (2012)

Reconfirm

BS 1765-1:1990

Hospital bedside lockers. -- Specification for general purpose bedside lockers for patients

CH/100 Confirmed (2012)

Reconfirm

BS 1765-2:1976

Specification for hospital bedside lockers -- General purpose lockers of wooden construction with facilities for hanging day clothes


Reconfirm

BS 1771-1:1989

Fabrics for uniforms and workwear -- Specification for fabrics of wool and wool blends

TCI/66 Confirmed (2012)

Reconfirm

BS 1771-2:1990

Fabrics for uniforms and workwear -- Specification for fabrics from cellulosic fibres, synthetic fibres and blends


Reconfirm

BS 1794:1952 Specification for chart ranges for temperature recording instruments


Reconfirm

BS 1804-1:1966

Specification for parallel steel dowel pins -- Inch series


Reconfirm

BS 1804-2:1968

Specification for parallel steel dowel pins -- Metric series


Reconfirm

BS 1804-3:1973

Specification for parallel steel dowel pins -- Parallel and taper types having screw threads for extraction purposes. Metric series


Reconfirm

BS 1858:2002 Electric cables. Accessories. Bitumen-based filling compounds


Reconfirm

BS 1868:1975+A1:1990

Specification for steel check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries


Reconfirm

BS 1876:1990 Specification for automatic flushing cisterns for urinals


Reconfirm


of 60 June 2016


BS 1877-8:1974

Domestic bedding -- Pillows and bolsters for domestic use (excluding cellular rubber pillows and bolsters)


Reconfirm

BS 1877-10:2011+A1:2012

Domestic bedding -- Specification for mattresses and bumpers for children’s cots, perambulators and similar domestic articles

CW/1 Current Confirm

BS 1881-131:1998

Testing concrete -- Methods for testing cement in a reference concrete


BS 1895:1973 Specification for metal-framed wheeled screens for use in hospitals


Reconfirm

BS 1900:1976 Specification for secondary reference thermometers LBI/1/2 Confirmed (2012)

Reconfirm

BS 1932-2:1989

Testing the strength of yarns and threads from packages -- Methods for determination of knot strength and loop strength


Reconfirm

BS 1935:1972 Specification for spindle noses and adjustable adaptors for multi-spindle heads


Reconfirm

BS 1936-1:1952

Undercuts and runouts for screw threads -- Inch screw threads


Reconfirm

BS 1936-2:1991

Undercuts and runouts for screw threads -- Specification for ISO metric screw threads


Reconfirm

BS 1968:1953 Specification for floats for ballvalves (copper) B/504 Confirmed (2012)

Reconfirm

BS 1970:2012 Hot water bottles manufactured from rubber and PVC. Specification

PRI/68 Current Reconfirm

BS 1979:1985 Specification for hospital ward bedsteads for psychiatric hospitals


Reconfirm

BS 1981:1991 Specification for unified machine screws and machine screw nuts


Reconfirm

BS 1983-3:1987

Chucks for machine tools and portable power tools -- Specification for dimensions of collet pads for base jaws of power operated workholding chucks


Reconfirm

BS 1983-4:1987

Chucks for machine tools and portable power tools -- Specification of criteria to be stated affecting performance of power operated workholding chucks at speed


Reconfirm

BS 1983-5:1989

Chucks for machine tools and portable power tools -- Code of practice for the safe operation of workholding chucks used on lathes


Reconfirm

BS 2000-129:2003

Methods of test for petroleum and its products -- Determination of bromine number. Colour indicator titration method


Reconfirm

BS 2000-138:2002

Methods of test for petroleum and its products -- Determination of oxidation stability of aviation fuel. Potential residue method


Reconfirm

BS 2000-143:2004

Methods of test for petroleum and its products -- Determination of asphaltenes (heptane insolubles) in crude petroleum and petroleum products


Reconfirm

BS 2000-182:2006

Methods of test for petroleum and its products -- Determination of inorganic acidity of petroleum products. Colour indicator titration method


Reconfirm

BS 2000-284:2004

Methods of test for petroleum and its products -- Determination of unsaponifiable and saponifiable matter in oils, fats and waxes


Reconfirm


of 60 June 2016


BS 2003:1974 Specification for mild steel drums (light duty: removable heads)

PKW/0/-/4 Confirmed (2012); Partially replaced by BS 2003-1:1987

Confirm

BS 2043:1968 Method for the determination of wool fibre fineness by the use of a projection microscope


Withdraw

BS 2059:1953 Specification for straight-sided splines and serrations MCE/5 Confirmed (2012)

Reconfirm

BS 2059/1:1957

Summary sheet: straight sided splines. Bottom fitting. Shallow


Reconfirm

BS 2059/2:1957

Summary sheet: straight sided splines. Bottom fitting. Deep


Reconfirm

BS 2059/3:1957

Summary sheet: straight sided serrations. Internal and external


Reconfirm

BS 2061:1953 Specification for phosphor bronze spring washers for general engineering purposes


Reconfirm

BS 2069:1954 Specification for gas sampling tubes LBI/1/2 Confirmed (2012)

Reconfirm

BS 2071:1989 Specification for Soxhlet extractors LBI/1/2 Confirmed (2012)

Reconfirm

BS 2096:1954 Method of testing oil-fired rotary dryers for use in asphalt and coated macadam plant


Reconfirm

BS 2099:1989 Specification for castors for hospital equipment CH/100 Confirmed (2012)

Reconfirm

BS 2456:1990 Specification for floats (plastics) for float operated valves for cold water services

B/504/-/8 Confirmed (2012)

Reconfirm

BS 2470:1973 Specification for hexagon socket screws and wrench keys. Inch series


Reconfirm

BS 2485:1987 Specification for tee slots, tee bolts, tee nuts and tenons


Reconfirm

BS 2501:1992 Specification for commercial refrigerated storage cabinets of the closed reach-in type


Reconfirm

BS 2502:1979 Specification for manufacture of sectional cold rooms (walk-in type)


Reconfirm

BS 2548:1986 Specification for wood wool for general packaging purposes


Reconfirm

BS 2562:1979 Specification for cable boxes for transformers and reactors


Reconfirm

BS 2567:1997 Specification for non-powered roller conveyors MHE/9 Confirmed (2012)

Reconfirm

BS 2586:1979 Specification for glass and reference electrodes for the measurement of pH


Reconfirm

BS 2610:1978 Method of test for the determination of the cuprammonium fluidity of cotton and certain cellulosic man-made fibres


Reconfirm

BS 2626:1992 Specification for lubricants for refrigerant compressors


Reconfirm

BS 2690-15:1974

Methods of testing water used in industry -- Free EDTA, total salts of EDTA, polyacrylate and polymethacrylate

EH/3 Confirmed (2012)

Reconfirm


of 60 June 2016


BS 2690-102:1979

Methods of testing water used in industry -- Hydrazine: spectrophotometric method (4-dimethylaminobenzaldehyde)


Reconfirm

BS 2690-104:1983

Methods of testing water used in industry -- Silica: reactive, total and suspended


Reconfirm

BS 2690-115:1983

Methods of testing water used in industry -- Cyclohexylamine: spectrophotometric method


Reconfirm

BS 2690-116:1983

Methods of testing water used in industry -- Morpholine: spectrophotometric method


Reconfirm

BS 2690-117:1983

Methods of testing water used in industry -- Long-chain fatty amines: spectrophotometric method


Reconfirm

BS 2692-2:1956

Fuses for voltages exceeding 1000 V a.c. -- Expulsion fuses


Reconfirm

BS 2718:1979 Specification for gas cylinder trolleys CH/100 Confirmed (2012)

Reconfirm

BS 2751:2001 General purpose acrylonitrile-butadiene rubber compounds. Specification


Reconfirm

BS 2765:1969 Specification for dimensions of temperature detecting elements and corresponding pockets


Reconfirm

BS 2769-1:1984

Hand-held electric motor-operated tools -- Specification for general requirements


Reconfirm

BS 2769-2.0:1984

Hand-held electric motor-operated tools. Particular requirements -- General introduction and list of Sections


Reconfirm

BS 2772-3:1987

Colliery haulage and winding equipment -- Specification for 1.5% manganese steel castings


Reconfirm

BS 2775:1987 Specification for rubber stoppers and tubing for general laboratory use


Reconfirm

BS 2782-1:Methods 131C and 131D:1978

Methods of testing plastics. Thermal properties -- Crushing strength after heating (heat resistance) of thermosetting moulding material. Crushing strength after heating (heat resistance) of thermosetting laminated sheet or mouldings


Reconfirm

BS 2782-4:Method 432D:1995

Methods of testing plastics. Chemical properties -- Determination of styrene evaporation from unsaturated polyester resins


Reconfirm

BS 2782-4:Method 434D:1975

Methods of testing plastics. Chemical properties -- Determination of antioxidants in polyolefin compounds by a spectrophotometric method


Reconfirm

BS 2782-4:Method 452B:1993

Methods of testing plastics. Chemical properties -- Determination of carbon black content of polyolefin compound


Reconfirm

BS 2782-4:Methods 451F to 451J:1978

Methods of testing plastics. Chemical properties -- Determination of formaldehyde in phenolic mouldings (colorimetric method). Determination of formaldehyde in phenolic mouldings (gravimetric method). Determination of sulphates in phenolic mouldings. Determination of chlorides in phenolic mouldings


Reconfirm

BS 2782-4:Methods 452D to 452F:1978

Methods of testing plastics. Chemical properties -- Determination of pH of water extract of polyolefin compound. Determination of water-soluble sulphates in polyolefin compound. Determination of water-soluble chlorides in polyolefin compound


Reconfirm


of 60 June 2016


BS 2782-5:Method 520A:1992

Methods of testing plastics. Optical and colour properties, weathering -- Determination of specular gloss


Reconfirm

BS 2782-5:Method 521A:1992

Methods of testing plastics. Optical and colour properties, weathering -- Determination of haze of film and sheet


Reconfirm

BS 2782-6:Method 641A:1983

Methods of testing plastics. Dimensional properties -- Determination of dimensional stability at 100$0DC of flexible polyvinyl chloride sheet


Reconfirm

BS 2782-7:Method 721A:1988

Methods of testing plastics. Rheological properties -- Determination of resin flow from resin impregnated glass fabric


Reconfirm

BS 2782-8:Method 822A:1992

Methods of testing plastics. Other properties -- Determination of water vapour transmission rate of plastics films (sachet method)


Reconfirm

BS 2782-8:Method 835A:1980

Methods of testing plastics. Other properties -- Determination of gelation time of phenolic resins


Reconfirm

BS 2782-8:Method 835B:1980

Methods of testing plastics. Other properties -- Determination of gelation time of polyester resins (manual method)


Reconfirm

BS 2782-8:Method 835D:1980

Methods of testing plastics. Other properties -- Determination of gelation time of thermosetting resins using a hot plate


Reconfirm

BS 2782-8:Methods 823A and 823B:1978

Methods of testing plastics. Other properties -- Methods for the assessment of carbon black dispersion in polyethylene using a microscope


Reconfirm

BS 2827:1957 Specification for machine screw nuts, pressed type (B.A. and Whitworth form threads)


Reconfirm

BS 2837:1988 Specification for steel links and strap assemblies for lifting attachments for packing cases


Reconfirm

BS 2838-1:1988

Examination and general treatment couches. -- Specification for fixed height couches


Reconfirm

BS 2838-2:1991

Examination and general treatment couches -- Specification for variable height couches


Reconfirm

BS 2842:1992 Specification for whirling hygrometer LBI/1/2 Confirmed (2012)

Reconfirm

BS 2856:1973 Precise conversion of inch and metric sizes on engineering drawings


Reconfirm

BS 2879:1980 Specification for draining taps (screw-down pattern) B/504 Confirmed (2012)

Reconfirm

BS 2881:1989 Specification for cupboards for the storage of medicines in health care premises


Reconfirm

BS 2889:1967 Method for the determination of trash content of cotton and for trash and lint content of waste intended for spinning, by the Shirley analyser


Reconfirm

BS 2891:1992 Specification for operating table mattresses and mattress sections


Reconfirm

BS 2893:1989 Specification for chemical preparations for portable and transportable chemical closets (excluding those for use in aircrafts)


Reconfirm

BS 2955:1993 Glossary of terms relating to particle technology LBI/37 Confirmed (2012)

Reconfirm


of 60 June 2016


BS 2987:1958 Notes on the application of statistics to paper testing PAI/11 Confirmed (2012)

Reconfirm

BS 3036:1958 Specification. Semi-enclosed electric fuses (ratings up to 100 amperes and 240 volts to earth)


Reconfirm

BS 3037-1:1958

Specification for tyres for crane rail wheels -- Double-flanged parallel-tread tyres


Reconfirm

BS 3037-2:1975

Specification for tyres for crane rail wheels -- Forged or rolled steel double flanged rail wheels and tyres (metric units)


Reconfirm

BS 3044:1990 Guide to ergonomics principles in the design and selection of office furniture

PH/9 Confirmed (2012)

Reconfirm

BS 3064:1978 Specification for metric sine bars and sine tables (excluding compound tables)


Reconfirm

BS 3083:1988 Specification for hot-dip zinc coated and hot-dip aluminium/zinc coated corrugated steel sheets for general purposes


Reconfirm

BS 3084:2006 Slide fasteners (Zips). Specification TCI/66/-/9 Confirmed (2012)

Reconfirm

BS 3090:1978 Method of test for the determination of the cuprammonium fluidity of linen materials


Reconfirm

BS 3092:1973 Specification for main friction clutches, main power-take-off assemblies and associated attachments for internal combustion engines


Reconfirm

BS 3110:1959 Methods for measuring the rub resistance of print PAI/43 Confirmed (2012)

Reconfirm

BS 3127:1979 Specification for ferrous and non-ferrous Bourdon tubing


Reconfirm

BS 3130-2:1990

Glossary of packaging terms -- Paper and board packaging


Reconfirm

BS 3130-4:1976

Glossary of packaging terms -- Metal containers and aerosols

PKW/0/-/8 Confirmed (2012); Partially replaced by BS EN 13045, BS EN 13046, BS EN 13047 and BS EN 13048:2000

Confirm

BS 3130-5:1994

Glossary of packaging terms -- Plastics and flexible packaging (excluding paper)


Reconfirm

BS 3130-6:1981

Glossary of packaging terms -- Wooden packaging PKW/0/-/11 Confirmed (2012)

Reconfirm

BS 3142-2:1990

Specification for manufactured solid smokeless fuels for household use -- Cokes for domestic openable and closed appliances and open fires with fan-assisted primary air


Reconfirm

BS 3142-3:1970

Specification for manufactured solid smokeless fuels for household use -- Specially reactive fuels for all types of domestic open fire


Reconfirm

BS 3145:1978 Specification for laboratory pH meters LBI/16 Confirmed (2012)

Reconfirm


of 60 June 2016


BS 3146-1:1974

Specification for investment castings in metal -- Carbon and low alloy steels


Reconfirm

BS 3146-2:1975

Specification for investment castings in metal -- Corrosion and heat resisting steels, nickel and cobalt base alloys


Reconfirm

BS 3166:1959 Specification for thermographs (liquid-filled and vapour pressure types) for use within the temperature range -20$0DF to 220$0DF ( -30$0DC to 105$0DC)


Reconfirm

BS 3170:1972 Specification for flexible couplings for power transmission


Reconfirm

BS 3173:1996 Specification for spring units for mattresses FW/0/2 Confirmed (2012)

Reconfirm

BS 3181-1:1987

Methods for determination of cotton fibre properties by the airflow method -- Determination of micronaire value by the single compression airflow method


Reconfirm

BS 3183:1968 Method for the determination of wool fibre diameter by the airflow method


Reconfirm

BS 3198:1981 Specification for copper hot water storage combination units for domestic purposes


Reconfirm

BS 3212:1991 Specification for flexible rubber tubing, rubber hose and rubber hose assemblies for use in LPG vapour phase and LPG/air installations


Reconfirm

BS 3231:1960 Specification for thermographs (bimetallic type) for air temperatures within the range 0$0DF to 140$0DF (-20$0DC to 60$0DC)


Reconfirm

BS 3248:1986 Specification for sparkguards for use with solid fuel appliances

CW/1 Confirmed (2012)

Reconfirm

BS 3251:1976 Specification. Indicator plates for fire hydrants and emergency water supplies


Reconfirm

BS 3262-3:1989

Hot-applied thermoplastic road marking materials -- Specification for application of material to road surfaces


Reconfirm

BS 3313-1:1968

Specification for aluminium capping foil and strip for dairy product containers -- Aluminium capping foil for glass containers


Reconfirm

BS 3314:1982 Specification for protective aprons for wet work PH/3 Confirmed (2012)

Reconfirm

BS 3321:1986 Method for measurement of the equivalent pore size of fabrics (bubble pressure test)


Reconfirm

BS 3332:1987 Specification for white metal bearing alloy ingots NFE/27 Confirmed (2012)

Reconfirm

BS 3356:1990 Method for determination of bending length and flexural rigidity of fabrics


BS 3376:1994 Specification for open fires burning solid mineral fuels with convection, with or without boilers


Reconfirm

BS 3379:1975 Specification for flexible urethane foam for loadbearing applications


Reconfirm

BS 3396-1:1991

Woven glass fibre fabrics for plastics reinforcement -- Specification for loom-state fabrics


Reconfirm

BS 3396-2:1987

Woven glass fibre fabrics for plastics reinforcement -- Specification for desized fabrics


Reconfirm


of 60 June 2016


BS 3396-3:1987

Woven glass fibre fabrics for plastics reinforcement -- Specification for finished fabrics for use with polyester resin systems


Reconfirm

BS 3401:1961 Specification for beryllium copper crinkle washers FME/9 Confirmed (2012)

Reconfirm

BS 3403:1972 Specification for indicating tachometer and speedometer systems for industrial, railway and marine use


Reconfirm

BS 3406-1:1986

Methods for determination of particle size distribution -- Guide to powder sampling


Reconfirm

BS 3406-4:1993

Methods for determination of particle size distribution -- Guide to microscope and image analysis methods


Reconfirm

BS 3407:1982 Guide for assessing coke screening plant PTI/16 Confirmed (2012)

Reconfirm

BS 3423:1986 Recommendations for design of glass vacuum vessels (including desiccators) for laboratory use


Reconfirm

BS 3449:1990 Method for resistance of fabrics to water absorption (Static immersion test)


Reconfirm

BS 3475:1976 Specification for bowl stands for use in hospitals CH/100 Confirmed (2012)

Reconfirm

BS 3507:1976 Specification. Orthodontic wire and tape and dental ligature wire

CH/106/2 Confirmed (2012)

Reconfirm

BS 3520:1962 Specification for dental wrought precious metal alloy wire


Reconfirm

BS 3521-2:1991

Terms relating to ophthalmic lenses and spectacle frames -- Glossary of terms relating to spectacle frames


Reconfirm

BS 3529:1962 Specification for dimensions of flywheel housing mounting pads and brackets for i.c. engines


Reconfirm

BS 3531-5.5:1990

Implants for osteosynthesis. Bone screws and auxiliary equipment -- Specification for taps and drills


Reconfirm

BS 3531-6.1:1990

Implants for osteosynthesis. Skeletal pins and wires -- Specification for general requirements


Reconfirm

BS 3531-14.2:1990

Implants for osteosynthesis. Intramedullary nailing systems -- Specification for medullary pins (Rush type) and introducer/extractors


Reconfirm

BS 3532:1990 Method of specifying unsaturated polyester resin systems


Reconfirm

BS 3537:1979 Specification for gudgeon pins up to 200 mm diameter


Reconfirm

BS 3551:1962 Specification for alloy steel shackles MHE/1 Confirmed (2012)

Reconfirm

BS 3553:1992 Specification for graphical symbols for coal preparation plant flowsheets


Reconfirm

BS 3567:1985 Code of practice for preparation of flowsheets for the design of coal preparation plant


Reconfirm

BS 3568:1988 Method for determination of solubility of wool in alkali TCI/80 Confirmed (2012)

Reconfirm

BS 3572:1986 Specification for access fittings for chimneys and other high structures in concrete or brick work

MHE/12/7 Confirmed (2012)

Reconfirm

BS 3580:1964 Guide to design considerations on the strength of screw threads


Reconfirm


of 60 June 2016


BS 3584:1989 Determination of solubility of wool in urea-bisulphite solution


Reconfirm

BS 3592-1:1986

Steel wire for hose reinforcement -- Specification for coated round and flat steel wire for rubber hose reinforcement


Reconfirm

BS 3619:1976 Specification. Mobile infusion stands CH/100 Confirmed (2012)

Reconfirm

BS 3621:2007+A2:2012

Thief resistant lock assembly. Key egress B/538 Current Confirm

BS 3622:1975 Specification for general purpose stools and anaesthetists' chairs for hospital use


Reconfirm

BS 3625:1963 Specification for eyepiece and screen graticules for the determination of the particle size of powders


Reconfirm

BS 3641-1:1971

Symbols for machine tools -- General symbols MTE/1 Confirmed (2012)

Reconfirm

BS 3641-3:1973

Specification for symbols for machine tools. -- Additional general symbols


Reconfirm

BS 3643-2:2007

ISO metric screw threads -- Specification for selected limits of size


Reconfirm

BS 3649:1963 Recommendations for original printing plates PAI/43 Confirmed (2012)

Reconfirm

BS 3666:1982 Specification for size designation of women's wear TCI/66/-/3 Confirmed (2012)

Reconfirm

BS 3678:1986 Specification for access hooks for chimneys and other high structures in steel


Reconfirm

BS 3680-10C:1996

Measurement of liquid flow in open channels. Sediment transport -- Guide to methods of sampling of sand-bed and cohesive-bed materials

CPI/113 Confirmed (2012)

Reconfirm

BS 3682-1:1994

Specification for railway brake hose -- Specification for compressed air brake hose


Reconfirm

BS 3731:1987 Specification for vee blocks TDW/4 Confirmed (2012)

Reconfirm

BS 3735:1987 Specification for plastics and rubber dustbin lids B/508/1 Confirmed (2012)

Reconfirm

BS 3746:1990 Specification for PVC garden hose PRI/66 Confirmed (2012)

Reconfirm

BS 3749:1991 Specification for E glass fibre woven roving fabrics for the reinforcement of polyester and epoxy resins systems


Reconfirm

BS 3799:1974 Specification for steel pipe fittings, screwed and socket-welding for the petroleum industry


Reconfirm

BS 3800-3:1990

General tests for machine tools -- Method of testing performance of machines operating under loaded conditions in respect of thermal distortion


Reconfirm

BS 3816:1989 Specification for epoxy resin casting systems used for electrical insulating applications at power frequencies


Reconfirm

BS 3821-1:1974

Specification for hardmetal dies and associated hardmetal tools -- Designation and marking of as-sintered pellets and finished dies


Reconfirm

BS 3821-2:1974

Specification for hardmetal dies and associated hardmetal tools -- As-sintered pellets and finished dies for drawing round wire


Reconfirm


of 60 June 2016


BS 3821-3:1974

Specification for hardmetal dies and associated hardmetal tools -- As-sintered pellets and finished dies for drawing round bar


Reconfirm

BS 3828:1973 Specification for crystal glass CW/29 Confirmed (2012)

Reconfirm

BS 3838:1980 Specification for blazer fabrics TCI/66 Confirmed (2012)

Reconfirm

BS 3841-1:1994

Determination of smoke emission from manufactured solid fuels for domestic use -- General method for determination of smoke emission rate

RHE/28/2 Confirmed (2012)

Reconfirm

BS 3841-2:1994

Determination of smoke emission from manufactured solid fuels for domestic use -- Methods for measuring the smoke emission rate


Reconfirm

BS 3866:1979 Specification for holes and shanks for buttons TCI/66 Confirmed (2012)

Reconfirm

BS 3868:1995 Specification for prefabricated drainage stack units in galvanized steel


Reconfirm

BS 3884-1:1974

Modular units for machine tools -- Specification for basic units


Reconfirm

BS 3886:1965 Specification for dental impression compound CH/106/2 Confirmed (2012)

Reconfirm

BS 3903:1977 Methods of test for sulphuric acid, oleum and liquid sulphur trioxide

CII/37 Confirmed (2012)

Reconfirm

BS 3936-4:2007

Nursery stock -- Specification for forest trees, poplars and willows

AW/1 Confirmed (2012)

Reconfirm

BS 3958-1:1982

Thermal insulating materials -- Magnesia preformed insulation


Reconfirm

BS 3958-2:1982

Thermal insulating materials -- Calcium silicate preformed insulation


Reconfirm

BS 3958-3:1985

Thermal insulating materials -- Metal mesh faced man-made mineral fibre mattresses


Reconfirm

BS 3958-4:1982

Thermal insulating materials -- Bonded preformed man-made mineral fibre pipe sections


Reconfirm

BS 3958-5:1986

Thermal insulating materials -- Specification for bonded man-made mineral fibre slabs


Reconfirm

BS 3958-6:1972

Thermal insulating materials -- Finishing materials; hard setting composition, self-setting cement and gypsum plaster


Reconfirm

BS 3962-1:1980

Methods of test for finishes for wooden furniture. -- Assessment of low angle glare by measurement of specular gloss at 85$0D

FW/0/1 Confirmed (2012)

Reconfirm

BS 3962-5:1980

Methods of test for finishes for wooden furniture -- Assessment of surface resistance to cold oils and fats


Reconfirm

BS 3962-6:1980

Methods of test for finishes for wooden furniture -- Assessment of resistance to mechanical damage

FW/0/1 Confirmed (2012); Partially replaced by BS EN 15186:2012

Confirm

BS 3987:1991 Specification for anodic oxidation coatings on wrought aluminium for external architectural applications


Reconfirm


of 60 June 2016


BS 3996:1978 Specification for colour coding for one-mark and graduated pipettes (including requirements for the service performance of the colour coding enamels)


Reconfirm

BS 3999-4:1967

Methods of measuring the performance of household electrical appliances -- Electric clothes drying cabinets and racks


Reconfirm

BS 4029:1978 Method of test for the determination of tensile elastic recovery of single fibres and filaments (constant-rate-of-extension machines)


Reconfirm

BS 4032:1978 Method of test for the determination of certain water- or alkali-soluble additives in cellulosic or synthetic fibres, yarns and fabrics or yarns and fabrics made from blends of such fibres


Reconfirm

BS 4044:1989 Methods for determination of fibre length by comb sorter diagram


Reconfirm

BS 4046:1991 Specification for compressed straw building slabs B/541 Confirmed (2012)

Reconfirm

BS 4048:Parts 1 and 2:1966

Specification for combined wire and fibre ropes -- Combined ropes. Spring lay ropes


Withdraw

BS 4068:1977 Specification for hospital trolleys for instruments, dressings and for anaesthetists' use including angular trolleys


Reconfirm

BS 4074:2000 Specification for steel trench struts B/514/21 Confirmed (2012)

Reconfirm

BS 4089:1999 Specification for metallic hose assemblies for liquid petroleum gases and liquefied natural gases

GSE/42 Confirmed (2012)

Reconfirm

BS 4092-1:1996

Specification for domestic front entrance gates -- Specification for metal gates


Reconfirm

BS 4110:1999 Specification for visors for vehicle users PH/2/2 Confirmed (2012)

Reconfirm

BS 4129:1990 Specification for welding primers and weld-through sealants, adhesives and waxes for resistance welding of sheet steel


Reconfirm

BS 4145:1967 Specification for glass mica boards for electrical purposes

GEL/15 Confirmed (2012)

Reconfirm

BS 4151:1967 Method of evaluating pneumatic valve positioners with input signal of 3 to 15 lbf/in$u2 (gauge)


Reconfirm

BS 4168-7:1982

Hexagon socket screws and wrench keys: metric series -- Specification for hexagon socket shoulder screws


Reconfirm

BS 4168-8:1982

Hexagon socket screws and wrench keys: metric series -- Specification for hexagon socket countersunk head screws


Withdraw

BS 4185-1:1967

Machine tool components -- Locknuts ('C' type, socket set screw locking)


Reconfirm

BS 4185-2:1967

Machine tool components -- Collars MTE/1 Confirmed (2012)

Reconfirm

BS 4185-7:1973

Machine tool components -- Wide range collets MTE/1 Confirmed (2012)

Reconfirm

BS 4185-9:1976

Specification. Machine tool components. -- Levelling screws, nuts and seating plates


Reconfirm

BS 4185-10:1977

Machine tool components -- Trapezoidal threads for lead and feed screw assemblies


Reconfirm


of 60 June 2016


BS 4185-11:1983

Machine tool components -- Recommendations for accuracy grades of gears


Reconfirm

BS 4185-13:1985

Machine tool components -- Specification for dimensions of counterbored holes


Reconfirm

BS 4185-14:1987

Machine tool components -- Method for determination of the pilot diameter of 60$0D centre holes


Reconfirm

BS 4204:1989 Specification for flash welding of steel tubes for pressure applications


Reconfirm

BS 4215-2:1987

Resistance spot welding electrodes, electrode holders and ancillary equipment -- Specification for straight resistance spot welding electrodes


Reconfirm

BS 4215-6:1987

Resistance spot welding electrodes, electrode holders and ancillary equipment -- Specification for electrode adaptors, female taper 1:10


Reconfirm

BS 4215-7:1987

Resistance spot welding electrodes, electrode holders and ancillary equipment -- Specification for male electrode caps


Reconfirm

BS 4215-15:1990

Resistance spot welding electrodes, electrode holders and ancillary equipment -- Specification for insulated pins for use in electrode back-ups


Reconfirm

BS 4222:1967 Specification for dimensions of the transmission coupling (slip-joint) to dental handpieces


Reconfirm

BS 4235-1:1972

Specification for metric keys and keyways -- Parallel and taper keys


Reconfirm

BS 4258-2:1989

Methods of test for phosphoric acid (orthophosphoric acid) for industrial use -- Determination of iron content


Reconfirm

BS 4258-3:1989

Methods of test for phosphoric acid (orthophosphoric acid) for industrial use -- Methods of test for phosphoric acid (orthophosphoric acid) for industrial use. Determination of sulphate content


Reconfirm

BS 4258-4:1975

Methods of test for phosphoric acid (orthophosphoric acid) for industrial use -- Determination of fluorine content


Reconfirm

BS 4258-5:1989

Methods of test for phosphoric acid (orthophosphoric acid) for industrial use -- Determination of silica content


Reconfirm

BS 4258-7:1978

Methods of test for phosphoric acid (orthophosphoric acid) for industrial use -- Determination of total phosphorus (V) oxide content: quinoline phosphomolybdate gravimetric method


Reconfirm

BS 4258-9:1989

Methods of test for phosphoric acid (orthophosphoric acid) for industrial use -- Determination of chloride content


Reconfirm

BS 4258-13:1990

Methods of test for phosphoric acid (orthophosphoric acid) for industrial use -- Determination of soluble sulphate content (potentiometric method)


Reconfirm

BS 4262:1984 Method of specifying the technical quality of coke for use in blast furnaces


Reconfirm

BS 4267-0:1987

Ammonium nitrate -- General introduction CII/37 Confirmed (2012)

Reconfirm

BS 4267-1:1988

Ammonium nitrate -- Method for determination of ammoniacal nitrogen content


Reconfirm


of 60 June 2016

BS identifier Title Committee Status Reconfirm

BS 4267-2:1988

Ammonium nitrate -- Method for determination of total nitrogen content


Reconfirm

BS 4267-4:1987

Ammonium nitrate -- Method for determination of sulphated ash


Reconfirm

BS 4267-7:1987

Ammonium nitrate -- Methods for determination of nitrite content


Reconfirm

BS 4267-8:1987

Ammonium nitrate -- Methods for determination of chloride content


Reconfirm

BS 4267-9:1987

Ammonium nitrate -- Method for determination of sulphate content


Reconfirm

BS 4267-10:1994

Ammonium nitrate -- Method for determination of matter soluble in diethyl ether


Reconfirm

BS 4267-11:1994

Ammonium nitrate -- Method for determination of inorganic matter and grit insoluble in water


Reconfirm

BS 4272-2:1996

Anaesthetic and analgesic machines -- Specification for intermittent (demand) flow analgesic machines for use with 50/50% (V/V) nitrous oxide and oxygen


Reconfirm

BS 4276:1968 Specification for hard metal for wire, bar and tube drawing dies


Reconfirm

BS 4277:1968 Glossary of terms used in offset lithographic printing PAI/43 Confirmed (2012)

Reconfirm

BS 4284:1981 Specification for dental impression pastes (zinc oxide type)


Reconfirm

BS 4305-2:1989

Baths for domestic purposes made of acrylic material -- Specification for connecting dimensions


Reconfirm

BS 4320:1968 Specification for metal washers for general engineering purposes. Metric series


Reconfirm

BS 4322:1968 Recommendations for buffering on hospital vehicles such as trolleys


Reconfirm

BS 4359-2:1982

Determination of the specific surface area of powders -- Recommended air permeability methods


Reconfirm

BS 4359-4:1995

Determination of the specific surface area of powders -- Recommendations for methods of determination of metal surface area using gas adsorption techniques


Reconfirm

BS 4361-1:1968

Woodworking machines -- Components MTE/23 Confirmed (2012)

Reconfirm

BS 4361-3:1972

Specification for woodworking machines -- Machine sizes and capacities


Reconfirm

BS 4367:1968 Methods of test for nitric acid CII/37 Confirmed (2012)

Reconfirm

BS 4372:1968 Specification for engineers' steel measuring rules TDW/4 Confirmed (2012)

Reconfirm

BS 4376-1:1991

Electrically operated blood storage refrigerators -- Specification for closed reach-in types


Reconfirm

BS 4376-2:1996

Electrically operated blood storage refrigerators -- Specification for cabinets for the storage of frozen plasma


Reconfirm

BS 4377:1991 Specification for tapping of holes to receive wire thread inserts (ISO metric threads)


Reconfirm

BS 4429:1987 Specification for rigging screws and turnbuckles for general engineering, lifting purposes and pipe hanger applications


Reconfirm


of 60 June 2016


BS 4431:1989 Methods of sampling and test for liquefied anhydrous ammonia


Reconfirm

BS 4439:1969 Specification for screwed studs for general purposes. Metric series


Reconfirm

BS 4442-1:1969

Specification for lathe spindle noses and faceplates. -- Types 'A' and 'Camlock'


Reconfirm

BS 4444:1989 Guide to electrical earth monitoring and protective conductor proving


Reconfirm

BS 4463:1969 Specification for crinkle washers for general engineering purposes. Metric series


Reconfirm

BS 4464:1969 Specification for spring washers for general engineering and automobile purposes. Metric series


Reconfirm

BS 4467:1991 Guide to dimensions in designing for elderly people PH/9 Confirmed (2012)

Reconfirm

BS 4475:2000 Specification for straight mineral lubricating oils PTI/7 Confirmed (2012)

Reconfirm

BS 4479-1:1990

Design of articles that are to be coated -- General recommendations


Reconfirm

BS 4479-2:1990

Design of articles that are to be coated -- Recommendations for electroplated and autocatalytic coatings


Reconfirm

BS 4479-3:1990

Design of articles that are to be coated -- Recommendations for conversion coatings


Reconfirm

BS 4479-4:1990

Design of articles that are to be coated -- Recommendations for paint coatings and varnish coatings


Reconfirm

BS 4479-7:1990

Design of articles that are to be coated -- Recommendations for thermally sprayed coatings


Reconfirm

BS 4479-8:1990

Design of articles that are to be coated -- Recommendations for vitreous enamel coatings


Reconfirm

BS 4479-9:1990

Design of articles that are to be coated -- Recommendations for low pressure and vacuum deposited coatings


Reconfirm

BS 4482:2005 Steel wire for the reinforcement of concrete products. Specification


Reconfirm

BS 4483:2005 Steel fabric for the reinforcement of concrete. Specification


Reconfirm

BS 4486:1980 Specification for hot rolled and hot rolled and processed high tensile alloy steel bars for the prestressing of concrete


Reconfirm

BS 4500A:1970

ISO limits and fits -- Data sheet: selected ISO fits - hole basis


Withdraw

BS 4500B:1970

ISO limits and fits -- Data sheet: selected ISO fits - shaft basis


Withdraw

BS 4506:1970 Specification for shaft ends MCE/5 Confirmed (2012)

Reconfirm

BS 4507:1969 Specification for grease gun cartridges (composite type)

GME/24 Confirmed (2012)

Withdrawal

BS 4508-1:1986

Thermally insulated underground pipelines -- Specification for steel cased systems with air gap


Reconfirm

BS 4508-4:1977

Thermally insulated underground pipelines -- Specific testing and inspection requirements for cased systems without air gap


Reconfirm


of 60 June 2016


BS 4514:2001 Unplasticized PVC soil and ventilating pipes of 82.4 mm minimum mean outside diameter, and fittings and accessories of 82.4 mm and of other sizes. Specification

PRI/88/1 Confirmed (2012)

Reconfirm

BS 4531:1986 Specification for portable and mobile troughed belt conveyors


Reconfirm

BS 4542:1970 Method for determination of loss tangent and permittivity of electrical insulating materials in sheet form (Lynch method)

GEL/15 Confirmed (2012)

Reconfirm

BS 4550-0:1978

Methods of testing cement -- General introduction B/516/12 Confirmed (2012)

Reconfirm

BS 4550-3.1:1978

Methods of testing cement. Physical tests -- Introduction


Reconfirm

BS 4550-6:1978

Methods of testing cement -- Standard sand for mortar cubes


Reconfirm

BS 4553-1:1998

Specification for 600/1000 V single-phase split concentric electric cables -- Cables having PVC insulation


Reconfirm

BS 4553-2:1998

Specification for 600/1000 V single-phase split concentric electric cables -- Cables having thermosetting insulation


Reconfirm

BS 4553-3:1998

Specification for 600/1000 V single-phase split concentric electric cables -- Cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire


Reconfirm

BS 4554:1970 Method of test for wettability of textile fabrics TCI/24 Confirmed (2012)

Reconfirm

BS 4581-2:1984

Flanges for mounting grinding wheels on grinding machine tools. -- Specification for dimensions and materials of flanges for grinding wheels of less than 76.2 mm bore


Reconfirm

BS 4582-1:1970

Specification for fine pitch gears (metric module) -- Involute spur and helical gears


Reconfirm

BS 4592-0:2006+A1:2012

Flooring, stair treads and handrails for industrial use -- Common design requirements and recommendations for installation


BS 4592-3:2006

Industrial type flooring and stair treads -- Cold formed metal planks. Specification


Reconfirm

BS 4602:1977 Specification for the use of metric units in specifications for glass containers and finishes


Reconfirm

BS 4611:1989 Methods of test for polyolefin tape yarns TCI/24 Confirmed (2012)

Reconfirm

BS 4618-1.1.3:1974

Recommendations for the presentation of plastics design data. Mechanical properties -- Creep lateral contraction ratio (Poisson's ratio)


Reconfirm

BS 4618-4.3:1974

Recommendations for the presentation of plastics design data. Environmental and chemical effects -- Resistance to colour change produced by exposure to light


Reconfirm

BS 4618-4.6:1974

Recommendations for the presentation of plastics design data. Environmental and chemical effects -- The thermal endurance of plastics


Reconfirm

BS 4651-0:1987

Ammonia solution -- Methods for sampling CII/37 Confirmed (2012)

Reconfirm


of 60 June 2016


BS 4651-1:1988

Ammonia solution -- Method for determination of density at 20$0DC


Reconfirm

BS 4651-4:1988

Ammonia solution -- Method for determination of residue after heating at 850$0DC


Reconfirm

BS 4651-5:1988

Ammonia solution -- Method for determination of iron content


Reconfirm

BS 4651-6:1988

Ammonia solution -- Methods for determination of chloride content


Reconfirm

BS 4651-7:1988

Ammonia solution -- Method for determination of carbon dioxide content


Reconfirm

BS 4655:1986 Method for determination of pile loss of cut-pile and non-loop pile upholstery fabrics

TCI/66/2 Confirmed (2012)

Reconfirm

BS 4656-1:1981

Accuracy of machine tools and methods of test -- Specification for lathes, general purpose type

MTE/1/2 Confirmed (2012)

Reconfirm

BS 4656-2:1988

Accuracy of machine tools and methods of test -- Specification for copying lathes and copying attachments


Reconfirm

BS 4656-3:1971

Specification for the accuracy of machine tools and methods of tests -- Milling machines, knee and column type, horizontal or vertical spindle plain


Reconfirm

BS 4656-4:1971

Specification for the accuracy of machine tools and methods of test -- Milling machines, bed type, horizontal or vertical spindle


Reconfirm

BS 4656-5:1979

Specification for the accuracy of machine tools and methods of tests -- Milling machines, knee and column type, horizontal spindle, universal


Reconfirm

BS 4656-10:1975

Specification for the accuracy of machine tools and methods of test -- Drilling machines, radial type


Reconfirm

BS 4656-11:1974

Accuracy of machine tools and methods of test -- Drilling machines, vertical floor mounted column and pillar types


Reconfirm

BS 4656-12:1979

Specification for the accuracy of machine tools and methods of test -- Dividing heads


Reconfirm

BS 4656-15:1976

Accuracy of machine tools and methods of test -- Drilling machines, turret and single spindle co-ordinate types


Reconfirm

BS 4656-18:1981

Accuracy of machine tools and methods of test -- Specification for broaching machines, horizontal internal type


Reconfirm

BS 4656-25:1980

Accuracy of machine tools and methods of test -- Gear planing machines


Reconfirm

BS 4656-26:1980

Accuracy of machine tools and methods of test -- Gear shaping machines


Reconfirm

BS 4656-28:1988

Accuracy of machine tools and methods of test -- Specification for numerically controlled turning machines up to and including 1500 mm turning diameter


Reconfirm

BS 4656-29:1981

Accuracy of machine tools and methods of test -- Specification for automatic lathes, multi-spindle (indexing drum) type


Reconfirm

BS 4656-38:1995

Accuracy of machine tools and methods of test -- Specification for surface finish of test pieces


Reconfirm


of 60 June 2016


BS 4678-2:1973

Cable trunking -- Steel underfloor (duct) trunking PEL/213 Confirmed (2012)

Reconfirm

BS 4678-4:1982

Cable trunking -- Specification for cable trunking made of insulating material


Reconfirm

BS 4727-5:Group 01:1985

Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to electromedical equipment -- Radiology and radiological physics terminology


Reconfirm

BS 4737-3.1:1977

Intruder alarm systems. Specifications for components -- Continuous wiring

GW/1 Confirmed (2012)

Reconfirm

BS 4737-3.2:1977

Intruder alarm systems. Specifications for components -- Foil on glass


Reconfirm

BS 4737-3.3:1977

Intruder alarm systems. Specifications for components -- Protective switches


Reconfirm

BS 4737-3.5:1978

Intruder alarm systems. Specifications for components -- Ultrasonic movement detectors


Reconfirm

BS 4737-3.6:1978

Intruder alarm systems. Specifications for components -- Acoustic detectors


Reconfirm

BS 4737-3.8:1978

Intruder alarm systems. Specifications for components -- Volumetric capacitive detectors


Reconfirm

BS 4737-3.9:1978

Intruder alarm systems. Specifications for components -- Pressure mats


Reconfirm

BS 4737-3.10:1978

Intruder alarm systems. Specifications for components -- Vibration detectors


Reconfirm

BS 4737-3.12:1978

Intruder alarm systems. Specifications for components -- Beam interruption detectors


Reconfirm

BS 4737-3.13:1978

Intruder alarm systems. Specifications for components -- Capacitive proximity detectors


Reconfirm

BS 4737-3.14:1986

Intruder alarm systems. Specifications for components -- Specification for deliberately-operated devices


Reconfirm

BS 4737-4.3:1988

Intruder alarm systems in buildings. Codes of practice -- Code of practice for exterior alarm systems


Reconfirm

BS 4737-5.2:1988

Intruder alarm systems. Terms and symbols -- Recommendations for symbols for diagrams


Reconfirm

BS 4751:2005 Mobile sanitary chairs CH/173/1 Confirmed (2012)

Reconfirm

BS 4756:1998 Specification for ready-mixed aluminium priming paints for woodwork


Withdraw

BS 4764:1986 Specification for powder cement paints STI/28 Confirmed (2012)

Reconfirm

BS 4778-2:1991

Quality vocabulary -- Quality concepts and related definitions

QS/1 Confirmed (2012)

Reconfirm

BS 4778-3.1:1991

Quality vocabulary. Availability, reliability and maintainability terms -- Guide to concepts and related definitions

DS/1 Confirmed (2012)

Reconfirm

BS 4819-2:1989

Resistance welding water-cooled transformers of the press-package and portable types. -- Specification for portable transformers


Reconfirm

BS 4823:1972 Guide to the selection of fitment bores for cylindrical shaft ends


Reconfirm


of 60 June 2016


BS 4827:1972 Specification for ISO miniature screw threads. Metric series


Reconfirm

BS 4834:1990 Specification for inset open fires without convection with or without boilers, burning solid mineral fuels


Reconfirm

BS 4840-1:1985

Rigid polyurethane (PUR) foam in slab form -- Specification for PUR foam for use in transport containers and insulated vehicle bodies


Reconfirm

BS 4840-2:1994

Rigid polyurethane (PUR) foam in slab form -- Specification for PUR foam for use in refrigerator cabinets, cold rooms and stores


Reconfirm

BS 4845-1:1972

Methods for sampling manufactured domestic solid smokeless fuels in small consignments of mass 50 kg to 5000 kg either in bulk or in bags -- Sampling of coke


Reconfirm

BS 4845-2:1979

Methods for sampling manufactured domestic solid smokeless fuels in small consignments of mass 50 kg to 5000 kg either in bulk or in bags -- Sampling of solid smokeless fuels other than coke


Reconfirm

BS 4856-1:1972

Methods for testing and rating fan coil units, unit heaters and unit coolers -- Thermal and volumetric performance for heating duties; without additional ducting


Reconfirm

BS 4856-2:1975

Methods for testing and rating fan coil units, unit heaters and unit coolers -- Thermal and volumetric performance for cooling duties: without additional ducting


Reconfirm

BS 4856-3:1975

Methods for testing and rating fan coil units, unit heaters and unit coolers -- Thermal and volumetric performance for heating and cooling duties; with additional ducting


Reconfirm

BS 4856-4:1997

Methods for testing and rating fan coil units, unit heaters and unit coolers -- Determination of sound power levels of fan coil units, unit heaters and unit coolers using reverberating rooms


Reconfirm

BS 4857-1:1972

Methods for testing and rating terminal reheat units for air distribution systems -- Thermal and aerodynamic performance


Reconfirm

BS 4857-2:1978

Methods for testing and rating terminal reheat units for air distribution systems -- Acoustic testing and rating


Reconfirm

BS 4859:1989 Methods for test for fabrics produced from polyolefin tape yarns


Reconfirm

BS 4868:1972 Specification for profiled aluminium sheet for building B/525/9 Confirmed (2012)

Reconfirm

BS 4880-1:1973

Specification for urinals -- Stainless steel slab urinals B/503 Confirmed (2012)

Reconfirm

BS 4882:1990 Specification for bolting for flanges and pressure containing purposes


Reconfirm

BS 4886:1988 Specification for hospital bedsteads CH/100 Confirmed (2012)

Reconfirm

BS 4904:1978 Specification for external cladding colours for building purposes


Reconfirm

BS 4948:1994 Method for assessment of the visible soiling by body contact of upholstery fabrics


Reconfirm


of 60 June 2016


BS 4954-1:1973

Methods for testing and rating induction units for air distribution systems -- Thermal and aerodynamic performance


Reconfirm

BS 4954-2:1978

Methods for testing and rating induction units for air distribution systems -- Acoustic testing and rating


Reconfirm

BS 4973-1:1973

Interlinings -- Nonwoven sew-in interlinings TCI/66 Confirmed (2012)

Reconfirm

BS 4973-2:1973

Interlinings -- Nonwoven fusible interlinings TCI/66 Confirmed (2012)

Reconfirm

BS 4973-3:1976

Interlinings -- Woven and knitted fusible interlinings TCI/66 Confirmed (2012)

Reconfirm

BS 4973-4:1990

Interlinings -- Specification for woven sew-in interlinings


Reconfirm

BS 4998:1985 Specification for moulded thermoplastics dustbins (excluding lids)


Reconfirm

BS 4999-103:2004

General requirements for rotating electrical machines -- Specification for symbols


Reconfirm

BS 4999-140:1987

General requirements for rotating electrical machines -- Specification for voltage regulation and parallel operation of a.c. synchronous generators


Reconfirm

BS 4999-145:1987

General requirements for rotating electrical machines -- Specification for winding terminations


Reconfirm

BS 5000-11:1973

Specification for rotating electrical machines of particular types or for particular applications -- Small-power electric motors and generators


Reconfirm

BS 5041-1:1987

Fire hydrant systems equipment -- Specification for landing valves for wet risers


Reconfirm

BS 5041-2:1987

Fire hydrant systems equipment -- Specification for landing valves for dry risers


Reconfirm

BS 5041-3:1975

Fire hydrant systems equipment -- Specification for inlet breechings for dry riser inlets


Reconfirm

BS 5041-4:1975

Fire hydrant systems equipment -- Specification for boxes for landing valves for dry risers


Reconfirm

BS 5041-5:1974

Fire hydrant systems equipment -- Specification for boxes for foam inlets and dry riser inlets


Reconfirm

BS 5045-7:2000

Transportable gas containers -- Specification for seamless steel gas containers of water capacity 0.5 L up to 15 L for special portable applications


Reconfirm

BS 5045-8:2000

Transportable gas containers -- Specification for seamless aluminium alloy gas containers of water capacity 0.5 L up to 15 L and up to 300 bar charged pressure at 15$0DC for special portable application


Reconfirm

BS 5058:1973 Method for the assessment of drape of fabrics TCI/24 Confirmed (2012)

Reconfirm

BS 5066:1974 Method of test for the resistance of fabrics to an artificial shower


Reconfirm

BS 5074:1974 Specification for short and long solid-stem thermometers for precision use


Reconfirm

BS 5077:1974 Specification for grease guns (hand-operated lever type) for use with cartridges complying with BS 4507


Withdrawal

BS 5078:1974 Specification for jig and fixture components MTE/18 Confirmed (2012)

Reconfirm


of 60 June 2016


BS 5106:1988 Specification for dimensions of spiral anti-extrusion back-up rings and their housings


Reconfirm

BS 5116:1974 Method of test for determination of breaking tenacity of flat bundles of cotton fibres


Reconfirm

BS 5138:1974 Specification for magnetic particle flaw inspection of finished machined solid forged and drop stamped crankshafts


Reconfirm

BS 5139:1991 Method of specifying general purpose polypropylene and propylene copolymer materials for moulding and extrusion


Reconfirm

BS 5141-1:1975

Specification for air heating and cooling coils -- Method of testing for rating of cooling coils


Reconfirm

BS 5141-2:1977

Specification for air heating and cooling coils -- Method of testing for rating of heating coils


Reconfirm

BS 5158:1989 Specification for cast iron plug valves PSE/18/3 Confirmed (2012)

Reconfirm

BS 5173-102.8:1987

Methods of test for rubber and plastics hoses and hose assemblies. Hydraulic pressure tests -- Pressure impulse test for rigid helix reinforced thermoplastics hoses


Reconfirm

BS 5173-102.3:1988

Methods of test for rubber and plastics hoses and hose assemblies. Hydraulic pressure tests -- Determination of volumetric expansion of fuel-dispensing pump hoses


Reconfirm

BS 5173-102.10:1990

Methods of test for rubber and plastics hoses and hose assemblies. Hydraulic pressure tests -- Hydrostatic tests for oil suction and discharge hose


Reconfirm

BS 5173-103.6:1990

Methods of test for rubber and plastics hoses and hose assemblies. Physical tests -- Determination of ignitability of lining


Reconfirm

BS 5173-103.2:1990

Methods of test for rubber and plastics hoses and hose assemblies. Physical tests -- Determination of crush resistance of hoses


Reconfirm

BS 5173-103.7:1991

Methods of test for rubber and plastics hoses and hose assemblies. Physical tests -- Determination of fracture resistance of rigid polymer helical reinforcement in thermoplastics hoses


Reconfirm

BS 5173-103.13:1994

Methods of test for rubber and plastics hoses and hose assemblies. Physical tests -- Determination of resistance to fire


Reconfirm

BS 5173-106.2:1990

Methods of test for rubber and plastics hoses and hose assemblies. Environmental tests -- General requirements for high temperature ageing tests


Reconfirm

BS 5189-3:1975

Dental casting investments -- Ethyl silicate-bonded investment materials


Reconfirm

BS 5192-1:1993

Guide to production control -- Introduction MS/1 Confirmed (2012)

Reconfirm

BS 5192-2:1993

Guide to production control -- Production programming

MS/1 Confirmed (2012)

Reconfirm

BS 5192-3:1993

Guide to production control -- Ordering methods MS/1 Confirmed (2012)

Reconfirm

BS 5192-4:1993

Guide to production control -- Dispatching (shop-floor control)


Reconfirm


of 60 June 2016


BS 5192-5:1993

Guide to production control -- The relationship between production control and other management functions


Reconfirm

BS 5192-6:1993

Guide to production control -- Computer aided production control


Reconfirm

BS 5204-1:1975

Specification for straightedges -- Cast iron straightedges (bow shaped and I-section)


Reconfirm

BS 5204-2:1977

Specification for straightedges -- Steel or granite straightedges of rectangular section


Reconfirm

BS 5208:1975 Specification for dimensions of power take-off driving shafts and mounting faces for small internal combustion engines


Reconfirm

BS 5223-3:1976

Specification for hospital bedding -- Flexible polyurethane pillows


Reconfirm

BS 5241-2:1991

Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam when dispensed or sprayed on a construction site -- Specification for dispensed foam for thermal insulation or buoyancy applications


Reconfirm

BS 5244:1986 Recommendations for application, storage and life expiry of hydraulic rubber hoses and hose assemblies


Reconfirm

BS 5245:1975 Specification for phosphoric acid based flux for soft soldered joints in stainless steel


Reconfirm

BS 5258-9:1989

Safety of domestic gas appliances -- Specification for combined appliances: fanned-circulation ducted-air heaters/circulators


Reconfirm

BS 5261-3:1989

Copy preparation and proof correction. -- Specification for marks for mathematical copy preparation and mathematical proof correction and their uses

PAI/43 Confirmed (2012)

Reconfirm

BS 5273:1975 Specification. Dense tar surfacing for roads and other paved areas


Reconfirm

BS 5276-1:1984

Pressure vessel details (dimensions) -- Specification for davits for branch covers of steel vessels


Reconfirm

BS 5306-4:2001+A1:2012

Fire extinguishing installations and equipment on premises -- Specification for carbon dioxide systems

FSH/18/6 Current Confirm

BS 5306-5.2:1984

Code of practice for fire extinguishing installations and equipment on premises. Halon systems -- Halon 1211 total flooding systems


Reconfirm

BS 5306-5.1:1992

Code of practice for fire extinguishing installations and equipment on premises. Halon systems -- Specification for halon 1301 total flooding systems


Reconfirm

BS 5306-8:2012

Fire extinguishing installations and equipment on premises -- Selection and positioning of portable fire extinguishers. Code of practice

FSH/2 Current Confirm

BS 5317:1976 Specification. Metric length bars and their accessories


Reconfirm

BS 5326:1976 Specification. Internal broaching tools and pull chuck locations


Reconfirm

BS 5327:1976 Specification. Swept elbow bends for fluid power applications


Reconfirm


of 60 June 2016


BS 5350-C6:1990

Methods of test for adhesives. Adhesively bonded joints: mechanical tests -- Determination of bond strength in direct tension in sandwich panels


Reconfirm

BS 5350-G2:1987

Methods of test for adhesives. Tests on anaerobic adhesives -- Determination of static shear strength of anaerobic adhesives


Reconfirm

BS 5353:1989 Specification for steel plug valves PSE/18/3 Confirmed (2012)

Reconfirm

BS 5372:1997+A1:2012

Specification for Dimensions of cable terminations for multi-core extruded solid dielectric insulated distribution cables of rated voltages 600/1000 V and 1900/3300 V having copper or aluminium conductors

GEL/20/11 Current Confirm

BS 5388:1976 Specification for spray taps B/504 Confirmed (2012)

Reconfirm

BS 5409-1:1976

Specification for nylon tubing -- Fully plasticized nylon tubing types 11 and 12 for use primarily in pneumatic installations


Reconfirm

BS 5415-1:1985

Safety of electrical motor-operated industrial and commercial cleaning appliances -- Specification for general requirements


Reconfirm

BS 5421-2:1978

Methods of test for elastomeric threads -- Polyurethane thread (elastane yarn)


Reconfirm

BS 5424-2:1987

Low-voltage controlgear -- Specification for semiconductor contactors (solid state contactors)


Reconfirm

BS 5426:1993 Specification for workwear and career wear TCI/66 Confirmed (2012)

Reconfirm

BS 5433:1976 Specification for underground stopvalves for water services


Reconfirm

BS 5440-1:2008

Flueing and ventilation for gas appliances of rated input not exceeding 70 kW net (1st, 2nd and 3rd family gases) -- Specification for installation of gas appliances to chimneys and for maintenance of chimneys

GSE/30 Current Reconfirm

BS 5441:1988 Methods of test for knitted fabrics TCI/24 Confirmed (2012)

Reconfirm

BS 5470:1977 Specification for glass alcohol hydrometers not incorporating a thermometer


Reconfirm

BS 5471:1977 Specification for thermometer for use with alcohol hydrometers


Reconfirm

BS 5482-2:1977

Domestic butane- and propane-gas-burning installations -- Installations in caravans and non-permanent dwellings


Revision

BS 5505-3:1977

Specification for bidets -- Vitreous china bidets over rim supply only. Quality, workmanship and functional dimensions other than connecting dimensions.


Reconfirm

BS 5506-3:1977

Specification for wash basins -- Wash basins (one or three tap holes). Materials, quality, design and construction


Reconfirm

BS 5520:1977 Specification for vitreous china bowl urinals (rimless type)


Reconfirm

BS 5535:1978 Specification for right angle and box angle plates TDW/4 Confirmed (2012)

Reconfirm

BS 5536:1988 Recommendations for preparation of technical drawings for microfilming


Reconfirm


of 60 June 2016


BS 5551-4.2.2:1987

Fertilizers. Chemical analysis. Determination of phosphorus. -- Extraction of phosphates soluble in mineral acids


Reconfirm

BS 5551-4.2.3:1987

Fertilizers. Chemical analysis. Determination of phosphorus. -- Method for determination of phosphorus content (quinoline molybdophosphate gravimetric method)


Reconfirm

BS 5590:1978 Specification for screw thread metric series measuring cylinders


Reconfirm

BS 5597:1991 Specification for non-refillable plastics aerosol dispensers up to 1000 mL capacity


Reconfirm

BS 5600-1.1:1979

Powder metallurgical materials and products. General information -- Introduction and contents


Reconfirm

BS 5607:1998 Code of practice for the safe use of explosives in the construction industry


Reconfirm

BS 5609:1986 Specification for printed pressure-sensitive, adhesive-coated labels for marine use, including requirements for label base material


Reconfirm

BS 5612:1978 Specification for dental porcelains for jacket crowns CH/106/2 Confirmed (2012)

Reconfirm

BS 5617:1985 Specification for urea-formaldehyde (UF) foam systems suitable for thermal insulation of cavity walls with masonry or concrete inner and outer leaves


Reconfirm

BS 5618:1985 Code of practice for thermal insulation of cavity walls (with masonry or concrete inner and outer leaves) by filling with urea-formaldehyde (UF) foam systems


Reconfirm

BS 5627:1984 Specification for plastics connectors for use with horizontal outlet vitreous china WC pans


Reconfirm

BS 5655-11:2005

Lifts and service lifts -- Code of practice for the undertaking of modifications to existing electric lifts


Reconfirm

BS 5655-12:2005

Lifts and service lifts -- Code of practice for the undertaking of modifications to existing hydraulic lifts


Reconfirm

BS 5655-14:1995

Lifts and service lifts -- Specification for hand-powered service lifts and platform hoists


Reconfirm

BS 5739:1979 Method of presentation of lubrication instructions for machine tools


Reconfirm

BS 5740:1989 Specification for oblong flat-top cans for liquid products


Reconfirm

BS 5760-2:1994

Reliability of systems, equipment and components -- Guide to the assessment of reliability

DS/1 Confirmed (2012)

Reconfirm

BS 5779:1979 Specification for spray mixing taps B/504 Confirmed (2012)

Reconfirm

BS 5803-5:1985

Thermal insulation for use in pitched roof spaces in dwellings -- Specification for installation of man-made mineral fibre and cellulose fibre insulation


Reconfirm

BS 5815-2:1988

Sheets, sheeting, pillowslips, towels, napkins, counterpanes and continental quilt secondary covers suitable for use in the public sector -- Specification for towels and napkins


Reconfirm


of 60 June 2016


BS 5815-3:1991

Sheets, sheeting, pillowslips, towels, napkins, counterpanes and continental quilt secondary covers suitable for use in the public sector -- Specification for counterpanes and continental quilt secondary covers including flammability performance


Reconfirm

BS 5837:2012 Trees in relation to design, demolition and construction. Recommendations

B/213 Current Confirm

BS 5842:1980 Specification for thermoplastic hose assemblies for dock, road and tanker use


Reconfirm

BS 5853:1980 Specification for medicine trolleys CH/100 Confirmed (2012)

Reconfirm

BS 5866-1:1990

Blankets suitable for use in the public sector -- Specification for wool and wool/polyamide blankets


Reconfirm

BS 5866-2:1991

Blankets suitable for use in the public sector -- Specification for cotton leno cellular blankets


Reconfirm

BS 5866-3:1991

Blankets suitable for use in the public sector -- Specification for synthetic fibre cellular blankets


Reconfirm

BS 5866-4:1991

Blankets suitable for use in the public sector -- Specification for flammability performance


Reconfirm

BS 5873-4:1998

Educational furniture -- Specification for strength and stability of storage furniture for educational institutions


Reconfirm

BS 5873-5:1998

Educational furniture -- Specification for security of fixed secure storage furniture for educational institutions


Reconfirm

BS 5877:1980 Guide for subjective listening tests for sound radio receivers

EPL/100 Confirmed (2012)

Reconfirm

BS 5892-5:1987+A2:2008

Railway rolling stock material (metric) -- Specification for steel bars for retaining rings for tyred wheels

RAE/3/-/1 Confirmed (2012)

Reconfirm

BS 5892-8:2012

Railway rolling stock materials -- Railway applications. Wheelsets and bogies. Powered and non-powered wheelsets with inboard bearings. Product requirements

RAE/3/-/1 Current Reconfirm

BS 5896:2012 High tensile steel wire and strand for the prestressing of concrete. Specification

ISE/104 Current Confirm

BS 5900:2012 Powered homelifts with partially enclosed carriers and no liftway enclosures. Specification

MHE/4 Current Reconfirm

BS 5904:1980 Specification for computer programming language RTL/2

IST/5 Confirmed (2012)

Reconfirm

BS 5905:1980 Specification for computer programming language CORAL 66


Reconfirm

BS 5906:2005 Waste management in buildings. Code of practice B/508/1 Confirmed (2012)

Reconfirm

BS 5908-1:2012

Fire and explosion precautions at premises handling flammable gases, liquids and dusts -- Code of practice for precautions against fire and explosion in chemical plants, chemical storage and similar premises

EXL/23 Current Confirm

BS 5908-2:2012

Fire and explosion precautions at premises handling flammable gases, liquids and dusts -- Guide to applicable standards and regulations

EXL/23 Current Confirm


of 60 June 2016


BS 5944-4:1984

Measurement of airborne noise from hydraulic fluid power systems and components -- Method of determining sound power levels from valves controlling flow and pressure


Reconfirm

BS 5944-5:1985

Measurement of airborne noise from hydraulic fluid power systems and components -- Simplified method of determining sound power levels from pumps using an anechoic chamber


Reconfirm

BS 5946:1980 Method of test for determination of the punking behaviour of phenol-formaldehyde foam


Reconfirm

BS 5965:1980 Specification for manually driven balanced personal homelifts


Reconfirm

BS 5970:2012 Thermal insulation of pipework, ductwork, associated equipment and other industrial installations in the temperature range of -100$0DC to +870$0DC. Code of practice


BS 5972:1980 Specification for photoelectric control units for road lighting

CPL/34/4/1 Confirmed (2012)

Reconfirm

BS 5992-6:1984

Electrical relays -- Specification for the basic modules for the dimensions of general purpose all-or-nothing relays


Reconfirm

BS 5993:1994 Specification for cricket balls SW/136 Confirmed (2012)

Reconfirm

BS 6004:2012 Electric cables. PVC insulated and PVC sheathed cables for voltages up to and including 300/500 V, for electric power and lighting


BS 6069-4.2:1991

Characterization of air quality. Stationary source emissions. -- Method for the determination of asbestos plant emissions by fibre count measurement

EH/2/1 Confirmed (2012)

Reconfirm

BS 6100-2:2007

Building and civil engineering. Vocabulary -- Spaces, building types, environment and physical planning

CB/101/-/2 Confirmed (2012)

Reconfirm

BS 6100-3:2007

Building and civil engineering. Vocabulary -- Civil engineering. General


Reconfirm

BS 6100-8:2007

Building and civil engineering. Vocabulary -- Work with timber and wood-based panels


Reconfirm

BS 6100-9:2007

Building and civil engineering. Vocabulary -- Work with concrete and plaster


Reconfirm

BS 6100-11:2007

Building and civil engineering. Vocabulary -- Performance characteristics, measurement and joints


Reconfirm

BS 6101-2:1991

Machine tool ball screws -- Specification for accuracy, including geometrical tests


Reconfirm

BS 6106:1981 Specification for 1 pint (568 ml) multi-trip glass bottles for pasteurized milk


Reconfirm

BS 6129-1:1981

Code of practice for the selection and application of bellows expansion joints for use in pressure systems. -- Metallic bellows expansion joints

PSE/14 Confirmed (2012)

Reconfirm

BS 6130-1:1993

Hose and hose assemblies for asphalt and bitumen. -- Specification for flexible metallic hose and hose assemblies


Reconfirm

BS 6134:1991 Specification for pressure and vacuum switches GEL/65/2 Confirmed (2012)

Reconfirm


of 60 June 2016


BS 6143-1:1992

Guide to the economics of quality -- Process cost model


Reconfirm

BS 6143-2:1990

Guide to the economics of quality -- Prevention, appraisal and failure model


Reconfirm

BS 6144:1990 Specification for expansion vessels using an internal diaphragm, for unvented hot water supply systems


Reconfirm

BS 6155:1990 Specification for tracheal tubes for large animals in veterinary anaesthesia


Reconfirm

BS 6161-18:1991

Methods of test for anodic oxidation coatings on aluminium and its alloys -- Determination of surface abrasion resistance


Reconfirm

BS 6174:1982 Specification for differential pressure transmitters with electrical outputs


Reconfirm

BS 6183-1:2000

Protective equipment for cricketers -- General requirements

PH/3/11 Confirmed (2012)

Reconfirm

BS 6183-2:2000

Protective equipment for cricketers -- Genital protectors


Reconfirm

BS 6183-3:2000

Protective equipment for cricketers -- Leg protectors for batsmen, wicket-keepers and fielders, and thigh, arm and chest protectors for batsmen


Reconfirm

BS 6183-4:2001

Protective equipment for cricketers -- Gloves for batsmen


Reconfirm

BS 6185:1982 Specification for size designation of men's wear TCI/66/-/3 Confirmed (2012)

Reconfirm

BS 6189:1989 Glossary of terms relating to fabrics and associated fibres, yarns and processes

TCI/66/-3 Confirmed (2012)

Reconfirm

BS 6195:2006 Electric cables. Rubber or silicone rubber insulated flexible cables and cords for coil end leads


Reconfirm

BS 6231:2006 Electric cables. Single core PVC insulated flexible cables of rated voltage 600/1000 V for switchgear and controlgear wiring


Reconfirm

BS 6261:1982 Method for evaluating the application of and interaction between components in upholstered furniture


Reconfirm

BS 6263-2:1991

Care and maintenance of floor surfaces -- Code of practice for resilient sheet and tile flooring


Reconfirm

BS 6280:1982 Method of vacuum (backsiphonage) test for water-using appliances


Reconfirm

BS 6283-2:1991

Safety and control devices for use in hot water systems -- Specifications for temperature relief valves for pressures from 1 bar to 10 bar


Reconfirm

BS 6290-2:1999

Lead-acid stationary cells and batteries -- Specification for the high-performance Plante positive type


Reconfirm

BS 6290-3:1999

Lead-acid stationary cells and batteries -- Specification for the flat positive plate type


Reconfirm

BS 6312-1:1994

Connectors for analogue telecommunication interfaces -- Specification for plugs

TCT/2 Confirmed (2012)

Reconfirm

BS 6312-2.1:1994

Connectors for analogue telecommunication interfaces. Sockets for use with plugs specified in BS 6312:Part 1 -- Specification for sockets. General requirements


Reconfirm


of 60 June 2016


BS 6312-2.2:1997

Connectors for analogue telecommunication interfaces -- Particular requirements for fixed socket-outlets used in permanent wiring installations


Reconfirm

BS 6319-1:1983

Testing of resin and polymer/cement compositions for use in construction -- Method for preparation of test specimens


Reconfirm

BS 6319-5:1984

Testing of resin and polymer/cement compositions for use in construction -- Methods for determination of density of hardened resin compositions


Reconfirm

BS 6319-7:1985

Testing of resin and polymer/cement compositions for use in construction -- Method for measurement of tensile strength


Reconfirm

BS 6319-8:1984

Testing of resin and polymer/cement compositions for use in construction -- Method for the assessment of resistance to liquids


Reconfirm

BS 6319-9:1987

Testing of resin and polymer/cement compositions for use in construction -- Method for measurement and classification of peak exotherm temperature


Reconfirm

BS 6319-10:1987

Testing of resin and polymer/cement compositions for use in construction -- Method for measurement of temperature of deflection under a bending stress


Reconfirm

BS 6319-11:1993

Testing of resin and polymer/cement compositions for use in construction -- Methods for determination of creep in compression and in tension


Reconfirm

BS 6319-12:1992

Testing of resin and polymer/cement compositions for use in construction -- Methods for measurement of unrestrained linear shrinkage and coefficient of thermal expansion


Reconfirm

BS 6324-1:1983

Terms relating to surgical implants -- Glossary of general medical terms


Reconfirm

BS 6324-2:1983

Terms relating to surgical implants -- Glossary of terms relating to mechanics


Reconfirm

BS 6324-3:1983

Terms relating to surgical implants -- Glossary of terms relating to materials


Reconfirm

BS 6324-4:1983

Terms relating to surgical implants -- Glossary of orthopaedic surgical terms


Reconfirm

BS 6332-6:1990

Thermal performance of domestic gas appliances -- Specification for thermal performance of combined appliances: fanned-circulation ducted-air heater/circulator


Reconfirm

BS 6336:1998 Guide to the development of fire tests, the presentation of test data and the role of tests in hazard assessment


Reconfirm

BS 6340-1:1983

Shower units -- Guide on choice of shower units and their components for use in private dwellings


Reconfirm

BS 6340-2:1983

Shower units -- Specification for the installation of shower units


Reconfirm

BS 6340-4:1984

Shower units -- Specification for shower heads and related equipment


Reconfirm

BS 6349-8:2007

Maritime structures -- Code of practice for the design of Ro-Ro ramps, linkspans and walkways

CB/502 Confirmed (2012)

Reconfirm


of 60 June 2016


BS 6349-1-3:2012

Maritime works -- General. Code of practice for geotechnical design

CB/502 Current Confirm

BS 6374-1:1985

Lining of equipment with polymeric materials for the process idustries. -- Specification for lining with sheet thermoplastics


Reconfirm

BS 6374-2:1984

Lining of equipment with polymeric materials for the process industries -- Specification for lining with non-sheet applied thermoplastics


Reconfirm

BS 6374-3:1984

Lining of equipment with polymeric materials for the process industries -- Specification for lining with stoved thermosetting resins


Reconfirm

BS 6374-4:1984

Lining of equipment with polymeric materials for the process industries -- Specification for lining with cold curing thermosetting resins


Reconfirm

BS 6374-5:1985

Lining of equipment with polymeric materials for the process industries -- Specification for lining with rubbers


Reconfirm

BS 6395:1983 Method for numerical designation of fabric faults by visual inspection


Reconfirm

BS 6400-3:2007

Specification for installation, exchange, relocation and removal of gas meters with a maximum capacity not exceeding 6 m$u3/h -- Low and medium pressure (3rd family gases)


Reconfirm

BS 6401:1983 Method for measurement, in the laboratory, of the specific optical density of smoke generated by materials


Reconfirm

BS 6405:1984 Specification for non-calibrated short link steel chain (grade 30) for general engineering purposes: class 1 and 2


Reconfirm

BS 6407-1:1983

Cage pallets for retail use -- Specification for collapsible cage pallets rated at 300 kg


Reconfirm

BS 6407-2:1984

Cage pallets for retail use -- Guide to the safe handling and use of collapsible cage pallets rated at 300 kg


Reconfirm

BS 6447:1984 Specification for absolute and gauge pressure transmitters with electrical outputs


Reconfirm

BS 6462:1985 Specification for mechanical performance of peg-type casement stays and face-fixed wedge-action fasteners


Reconfirm

BS 6463-103:1999

Quicklime, hydrated lime and natural calcium carbonate -- Methods for physical testing


Reconfirm

BS 6469-99.2:1992

Insulating and sheathing materials of electric cables. Test methods used in the United Kingdom but not specified in BS EN 60811 -- Electrical tests


Reconfirm

BS 6476:1984 Guide to garment quality and relevant British Standards

TCI/66/-/3 Confirmed (2012)

Reconfirm

BS 6498:2002 Guide to preparation of microfilm and other microforms that may be required as evidence

IDT/1 Confirmed (2012)

Reconfirm

BS 6499:1998 Metal screw necks, screw caps and inner seals for metal containers. Specification


Reconfirm

BS 6515:1984 Specification for polyethylene damp-proof courses for masonry


Reconfirm

BS 6524:1984 Method for determination of the surface resistivity of a textile fabric


Reconfirm


of 60 June 2016


BS 6526:1998 Domestic oven gloves. Requirements and test methods


Reconfirm

BS 6543:1985 Guide to use of industrial by-products and waste materials in building and civil engineering


Reconfirm

BS 6571-1:1989

Vehicle parking control equipment -- Specification for coin operated clockwork parking meters


Reconfirm

BS 6571-2:1989

Vehicle parking control equipment -- Specification for electrically powered parking meters


Reconfirm

BS 6571-4:1989

Vehicle parking control equipment -- Specification for barrier type parking control equipment


Reconfirm

BS 6571-6:1996

Vehicle parking control equipment -- Specification for pay-on-foot parking control equipment


Reconfirm

BS 6571-7:1997

Vehicle parking control equipment -- Specification for parking discs


Reconfirm

BS 6571-8:1997

Vehicle parking control equipment -- Specification for pre-purchased parking vouchers


Reconfirm

BS 6576:2005+A1:2012

Code of practice for diagnosis of rising damp in walls of buildings and installation of chemical damp-proof courses


BS 6579-1:1988

Safety fences and barriers for highways -- Specification for components for tensioned corrugated beam safety fence on Z posts


Reconfirm

BS 6579-3:1988

Safety fences and barriers for highways -- Specification for components for tensioned rectangular hollow section beam (100 mm x 100 mm) safety fence


Reconfirm

BS 6579-4:1990

Safety fences and barriers for highways -- Specification for components for tensioned rectangular hollow section beam (200 mm x 100 mm) safety fence


Reconfirm

BS 6579-5:1986

Safety fences and barriers for highways -- Specification for open box beam safety fence (single height)


Reconfirm

BS 6579-6:1988

Safety fences and barriers for highways -- Specification for components for open box beam safety fence (double height)


Reconfirm

BS 6579-7:1989

Safety fences and barriers for highways -- Specification for components for untensioned corrugated beam safety fence


Reconfirm

BS 6579-8:1987

Safety fences and barriers for highways -- Specification for concrete safety barriers


Reconfirm

BS 6583:1985 Methods for volumetric testing for rating of fan sections in central station air handling units (including guidance on rating)


Reconfirm

BS 6587:1985 Method of acceptance inspection for fasteners FME/9 Confirmed (2012)

Reconfirm

BS 6622:2007 Electric cables. Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6 kV to 19/33 kV. Requirements and test methods


Reconfirm

BS 6645:1985 Method for determination of alkali solubility of flax materials


Reconfirm

BS 6646:1985 Method for determination of ash of textiles TCI/80 Confirmed (2012)

Reconfirm


of 60 June 2016


BS 6648:1986 Methods for wet ashing of textile materials for subsequent determination of metal content


Reconfirm

BS 6652:1985 Specification for packagings resistant to opening by children

PKW/0/3 Confirmed (2012)

Withdraw

BS 6663:1986 Methods for determination of crimp rigidity of textured nylon yarns


Reconfirm

BS 6675:1986 Specification for servicing valves (copper alloy) for water services


Reconfirm

BS 6683:1985 Guide to installation and use of valves PSE/18/1 Confirmed (2012)

Reconfirm

BS 6720:1986 Specification for marking transit information on packages for distribution


Reconfirm

BS 6747:1987 Specification for orthodontic resins CH/106/2 Confirmed (2012)

Reconfirm

BS 6751:1986 Guide for protection of machine tools intended for use in extreme environmental conditions


Reconfirm

BS 6793:1987 Specification for men's uniform shirts TCI/66 Confirmed (2012)

Reconfirm

BS 6808-3:1989

Coordinate measuring machines -- Code of practice TDW/4 Confirmed (2012)

Reconfirm

BS 6809:1987 Method for calibration of radiometers for use in fire testing


Reconfirm

BS 6841:1987 Guide to measurement and evaluation of human exposure to whole-body mechanical vibration and repeated shock

GME/21/6 Confirmed (2012)

Reconfirm

BS 6859-1:1987

Operating tables -- Specification for mobile general operating tables


Reconfirm

BS 6859-2:1987

Operating tables -- Specification for fixed-pedestal general operating tables


Reconfirm

BS 6870-3:1989

Analysis of aluminium ores -- Method for multi-element analysis by wavelength dispersive X-ray fluorescence


Reconfirm

BS 6880-1:1988

Code of practice for low temperature hot water heating systems of output greater than 45 kW -- Fundamental and design considerations


Reconfirm

BS 6880-2:1988

Code of practice for low temperature hot water heating systems of output greater than 45 kW -- Selection of equipment


Reconfirm

BS 6880-3:1988

Code of practice for low temperature hot water heating systems of output greater than 45 kW -- Installation, commissioning and maintenance


Reconfirm

BS 6884:1987 Recommendations for plan dimensions of unit loads PKW/0 Confirmed (2012)

Reconfirm

BS 6885:1988 Specification for miniature cartridge fuse links for use on printed wiring boards


Reconfirm

BS 6898:1987 Specification for glass centrifuge tubes for general laboratory use


Reconfirm

BS 6905:1987 Method for estimation of concentration of disinfectants used in 'dirty' conditions in hospitals by the modified Kelsey-Sykes test


Reconfirm

BS 6909:1988 Method for generation and counting of the airborne linting propensity of fabrics in the dry state


Reconfirm


of 60 June 2016


BS 6913-5:1990

Operation and maintenance of earth-moving machinery -- Specification for diagnostic ports


Reconfirm

BS 6920-3:2000

Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water -- High temperature tests


Reconfirm

BS 6942-2:1989

Design and construction of small kits for oxy-fuel gas welding and allied processes -- Specification for kits using refillable gas containers for oxygen and fuel gas


Reconfirm

BS 6944:1988 Specification for flash welding of butt joints in ferrous metals (excluding pressure piping applications)


Reconfirm

BS 6946:1988 Specification for metal channel cable support systems for electrical installations


Reconfirm

BS 6965-1:1988

Creasing properties of carton board. -- Method for determination of crease recovery (spring back) of 90$0D fold


Reconfirm

BS 6972:1988 Specification for general requirements for luminaire supporting couplers for domestic, light industrial and commercial use


Reconfirm

BS 6979:1989 Method for measurement of static deflection of power presses


Reconfirm

BS 6981:1988 Method for determination of acid content of wool TCI/80 Confirmed (2012)

Reconfirm

BS 6991:1990 Specification for 6/10 A, two-pole weather-resistant couplers for household, commercial and light industrial equipment


Reconfirm

BS 7000-6:2005 (large print version)

Design management systems -- Managing inclusive design. Guide

DES/1 Confirmed (2012)

Reconfirm

BS 7001:1988 Specification for interchangeability and safety of a standardized luminaire supporting coupler


Reconfirm

BS 7021:1989 Code of practice for thermal insulation of roofs externally by means of sprayed rigid polyurethane (PUR) or polyisocyanurate (PIR) foam


Reconfirm

BS 7022:1988 Guide for geophysical logging of boreholes for hydrogeological purposes


Reconfirm

BS 7028:1999 Eye protection for industrial and other uses. Guidance on selection, use and maintenance


Reconfirm

BS 7033-1:1989

Cleaning and polishing cloths -- Specification for optical polishing cloths for use on transparent plastics panels


Reconfirm

BS 7067:1990 Guide to determination and presentation of float and sink characteristics of raw coal and of products from coal preparation plants


Reconfirm

BS 7068:1989 Specification for alternating pressure air mattresses CH/100 Confirmed (2012)

Reconfirm

BS 7071:1992 Specification for portable residual current devices PEL/23 Confirmed (2012)

Reconfirm

BS 7074-1:1989

Application, selection and installation of expansion vessels and ancillary equipment for sealed water systems -- Code of practice for domestic heating and hot water supply


Reconfirm


of 60 June 2016


BS 7074-2:1989

Application, selection and installation of expansion vessels and ancillary equipment for sealed water systems -- Code of practice for low and medium temperature hot water heating systems


Reconfirm

BS 7074-3:1989

Application, selection and installation of expansion vessels and ancillary equipment for sealed water systems -- Code of practice for chilled and condenser systems


Reconfirm

BS 7116:1990 Specification for double sided pressure sensitive adhesive tapes


Reconfirm

BS 7121-11:1998

Code of practice for safe use of cranes -- Offshore cranes


Reconfirm

BS 7121-12:1999

Code of practice for safe use of cranes -- Recovery vehicles and equipment. Code of practice


Reconfirm

BS 7121-2-1:2012

Code of practice for the safe use of cranes -- Inspection, maintenance and thorough examination. General

MHE/3/11 Current Confirm

BS 7121-2-3:2012

Code of practice for the safe use of cranes -- Inspection, maintenance and thorough examination. Mobile cranes


BS 7121-2-5:2012

Code of practice for the safe use of cranes -- Inspection, maintenance and thorough examination. Tower cranes


BS 7143:1989 Specification for catheter mounts (flexible adaptors) for use with medical breathing systems


Reconfirm

BS 7164-22.1:1994

Chemical tests for raw and vulcanized rubber. Determination of chlorine content -- Parr bomb method


Reconfirm

BS 7167:1990 Specification for Bordeaux connections MHE/1 Confirmed (2012)

Reconfirm

BS 7181:1989 Specification for storage cisterns up to 500 L actual capacity for water supply for domestic purposes


Reconfirm

BS 7184:2001 Selection, use and maintenance of chemical protective clothing. Guidance


Reconfirm

BS 7209:1990 Specification for water vapour permeable apparel fabrics


Reconfirm

BS 7211:2012 Electric cables. Thermosetting insulated and thermoplastic sheathed cables for voltages up to and including 450/750 V for electric power and lighting and having low emission of smoke and corrosive gases when affected by fire


BS 7227:1990 Procedures for the application of ISO 7812 to allocate UK Issuer Identification Numbers (UK IINs) for use on identification cards


Reconfirm

BS 7254-3:1990

Orthopaedic implants -- Recommendations for care and handling


Reconfirm

BS 7254-4:1990

Orthopaedic implants -- Recommendations for retrieval and examination of implants and associated tissues


Reconfirm

BS 7255:2012 Code of practice for safe working on lifts MHE/4 Current Reconfirm

BS 7262:1990 Specification for automatic safe load indicators MHE/3/11 Confirmed (2012)

Reconfirm

BS 7289:1990 Specification for dimensions of three-piece tinplate aerosol cans


Reconfirm


of 60 June 2016


BS 7310:1990 Specification for ion-selective electrodes, reference electrodes, combination electrodes and ion-selective electrode meters for determination of ions in solution


Reconfirm

BS 7319-6:1990

Analysis of sodium chloride for industrial use -- Method for determination of cadmium content


Reconfirm

BS 7319-7:1990

Analysis of sodium chloride for industrial use -- Method for determination of copper content


Reconfirm

BS 7319-8:1990

Analysis of sodium chloride for industrial use -- Method for determination of lead content


Reconfirm

BS 7319-9:1990

Analysis of sodium chloride for industrial use -- Method for determination of mercury content


Reconfirm

BS 7319-10:1990

Analysis of sodium chloride for industrial use -- Method for determination of pH and total alkalinity


Reconfirm

BS 7319-11:1990

Analysis of sodium chloride for industrial use -- Method for determination of iron content


Reconfirm

BS 7323:1990 Specification for sit harnesses for rock climbing SW/136/5 Confirmed (2012)

Reconfirm

BS 7327-1:1990

Small fixed fire extinguishers -- Specification for small fixed halon fire extinguishers


Reconfirm

BS 7339:1990 Code of practice for supplementary checking of metallic materials of construction in pressurized systems


Reconfirm

BS 7346-5:2005

Components for smoke and heat control systems -- Functional recommendations and calculation methods for smoke and heat exhaust ventilation systems, employing time-dependent design fires. Code of practice


Reconfirm

BS 7350:1990 Specification for double regulating globe valves and flow measurement devices for heating and chilled water systems


Reconfirm

BS 7351:1990 Specification for metal-sheathed heating elements for industrial use


Reconfirm

BS 7357:1990 Specification for 7.5 L WC flushing cisterns B/503 Confirmed (2012)

Reconfirm

BS 7379:1991 Specification for plastics/metal laminate collapsible tubes


Reconfirm

BS 7394-2:2007

Complete spectacles -- Specification for prescription spectacles


Reconfirm

BS 7405:1991 Guide to selection and application of flowmeters for the measurement of fluid flow in closed conduits


Reconfirm

BS 7419:2012 Specification for holding down bolts FME/9 Current Confirm

BS 7420:1991 Guide for determination of calorific values of solid, liquid and gaseous fuels (including definitions)


Reconfirm

BS 7438:1991 Specification for steel and copper alloy wafer check valves, single-disk, spring-loaded type


Reconfirm

BS 7442-0:1991

Rubber or plastics covered rollers -- Introduction PRI/73 Confirmed (2012)

Reconfirm

BS 7448-1:1991

Fracture mechanics toughness tests -- Method for determination of KIc, critical CTOD and critical J values of metallic materials

ISE/101 Current Confirm


of 60 June 2016


BS 7456:1991 Code of practice for stabilization and thermal insulation of cavity walls (with masonry or concrete inner and outer leaves) by filling with polyurethane (PUR) foam systems


Reconfirm

BS 7521:1992 Specification for electronic messaging enabling the application of BS ISO/IEC 10021 in the United Kingdom


Reconfirm

BS 7530-1:1992

Methods for froth flotation testing of hard coal -- Laboratory procedure


Reconfirm

BS 7530-2:1995

Methods for froth flotation testing of hard coal -- Evaluation of flotation characteristics


Reconfirm

BS 7539:1992 Methods for test for determination of properties of cushioning materials for package design purposes


Reconfirm

BS 7540-3:2005

Electric cables. Guide to use for cables with a rated voltage not exceeding 450/750 V -- National standard cables not included in HD 21 and HD 22


Reconfirm

BS 7542:1992 Method of test for curing compounds for concrete B/517/1 Confirmed (2012)

Reconfirm

BS 7558:1992 Specification for gun cabinets GW/2 Confirmed (2012)

Reconfirm

BS 7582:2005 Code of practice for reconditioning of used safes GW/2 Confirmed (2012)

Reconfirm

BS 7591-1:1992

Porosity and pore size distribution of materials -- Method of evaluation by mercury porosimetry


Withdraw

BS 7591-4:1993

Porosity and pore size distribution of materials -- Method of evaluation by liquid expulsion


Reconfirm

BS 7593:2006 Code of practice for treatment of water in domestic hot water central heating systems


Reconfirm

BS 7611:1992 Specification for potato storage boxes for mechanical handling


Reconfirm

BS 7649:1993 Guide to the design and preparation of documentation for users of application software


Withdraw

BS 7655-0:2006

Specification for insulating and sheathing materials for cables -- General introduction


Reconfirm

BS 7655-1.2:1997

Specification for insulating and sheathing materials for cables -- General 90$0DC application


Reconfirm

BS 7655-1.3:2000

Specification for insulating and sheathing materials for cables. Elastomeric insulating compounds -- Sec1.3 XLPE


Reconfirm

BS 7655-1.5:2000

Specification for insulating and sheathing materials for cables -- Flame retardant composites


Reconfirm

BS 7655-2.3:2000

Specification for insulating and sheathing materials for cables. Elastomeric sheathing compounds -- General application


Reconfirm

BS 7655-2.6:2000

Specification for insulating and sheathing materials for cables -- Sheathing compounds for ships' wiring and offshore applications


Reconfirm

BS 7655-3.2:2000

Specification for insulating and sheathing materials for cables. PVC insulating compounds -- Hard grade types


Reconfirm

BS 7655-4.2:2000

Specification for insulating and sheathing materials for cables. PVC sheathing compounds -- General application


Reconfirm


of 60 June 2016


BS 7655-6.1:1997

Specification for insulating and sheathing materials for cables -- General application thermoplastic types


Reconfirm

BS 7655-10.1:2000

Specification for insulating and sheathing materials for cables -- Thermoplastic medium density polyethylene (MDPE) sheathing compound


Reconfirm

BS 7660:1993 Specification for safety pins for general use TCI/66 Confirmed (2012)

Reconfirm

BS 7666-0:2006

Spatial datasets for geographical referencing -- General model for gazetteers and spatial referencing


Reconfirm

BS 7666-1:2006

Spatial datasets for geographical referencing -- Specification for a street gazetteer


Reconfirm

BS 7666-2:2006

Spatial datasets for geographical referencing -- Specification for a land and property gazetteer


Reconfirm

BS 7666-5:2006

Spatial datasets for geographical referencing -- Specification for a delivery point gazetteer


Reconfirm

BS 7669-3:1994

Vehicle restraint systems -- Guide to the installation, inspection and repair of safety fences


Reconfirm

BS 7670-1:1993

Steel nuts and bolts for resistance projection welding. -- Specification for dimensions and properties


Reconfirm

BS 7715:1994 Specification for prevailing torque type bolts, screws and studs with non-metallic prevailing torque elements incorporated into the thread


Reconfirm

BS 7724:1994 Specification for split pins (metric series) FME/9 Confirmed (2012)

Reconfirm

BS 7727:1994 Code of practice for installation and inspection of pre-insulated compression terminals and connectors for cables with copper conductors up to 6 mm$u2


Reconfirm

BS 7738-1:1994

Specification for information systems products using SSADM (Structured Systems Analysis and Design Method) -- Implementation of SSADM version 4


Withdraw

BS 7751-1:1994

Prevailing torque type wire thread inserts -- Specification for ISO metric coarse pitch threads


Reconfirm

BS 7751-2:1994

Prevailing torque type wire thread inserts -- Specification for ISO metric fine pitch threads


Reconfirm

BS 7752-2:1994

Free running type wire thread inserts -- Specification for ISO metric fine pitch threads


Reconfirm

BS 7753:1994 Specification for performance of prevailing torque wire thread inserts


Reconfirm

BS 7754:1994 Code of practice for garment evaluation by wearer trials


Reconfirm

BS 7764:1994 Specification for hexagon slotted nuts and castle nuts FME/9 Confirmed (2012)

Reconfirm

BS 7776:1995 Glossary of torque terminology for threaded fasteners FME/9 Confirmed (2012)

Reconfirm

BS 7793-1:1995

Vitreous enamel coatings for use on bolted steel panels -- Specification for coatings on bolted steel panels for use in agricultural slurry tanks


Reconfirm

BS 7795:1995 Specification for bolts, screws and studs with a pre-applied micro-encapsulated chemical adhesive feature incorporated into the thread


Reconfirm

BS 7814:1995 Specification for bolts and screws incorporating either underhead locking or anti-rotation features


Reconfirm


of 60 June 2016


BS 7818:1995 Specification for pedestrian restraint systems in metal B/509/1 Confirmed (2012)

Reconfirm

BS 7835:2007 Electric cables. Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6 kV to 19/33 kV having low emission of smoke and corrosive gases when affected by fire. Requirements and test methods


Reconfirm

BS 7838:1996 Specification for corrugated stainless steel semi-rigid pipe and associated fittings for low-pressure gas pipework of up to DN 50

GSE/42 Confirmed (2012); Partially replaced by BS EN 15266:2007

Confirm

BS 7842:1996 Bolts, screws and studs with pre-applied thread sealing feature incorporated into the thread


Reconfirm

BS 7843-3:2012

Acquisition and management of meteorological precipitation data from a gauge network -- Code of practice for the design and manufacture of storage and automatic collecting raingauges

CPI/113 Current Confirm

BS 7843-4:2012

Acquisition and management of meteorological precipitation data from a raingauge network -- Guide for the estimation of areal rainfall

CPI/113 Current Confirm

BS 7850-1:1992

Total quality management -- Guide to management principles


Reconfirm

BS 7852:1997 Code of practice for design of canoes and kayaks GME/33 Confirmed (2012)

Reconfirm

BS 7858:2012 Security screening of individuals employed in a security environment. Code of practice

GW/3/-/9 Current Confirm

BS 7861-1:2007

Strata reinforcement support system components used in coal mines -- Specification for rockbolting

MRE/1 Confirmed (2012)

Reconfirm

BS 7870-3.10:2001

LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV -- PVC insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors


Reconfirm

BS 7870-3.20:2001

LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV -- PVC insulated split concentric cables with copper or aluminium conductors


Reconfirm

BS 7871-2:1998

Pneumatic conveying -- Glossary of equipment MHE/9 Confirmed (2012)

Reconfirm

BS 7873:1996 Code of practice for application and testing of hot enamel external and/or internal coating of iron and steel pipes


Reconfirm

BS 7885:1997 Code of practice for safe entry into silos MHE/9 Confirmed (2012)

Reconfirm

BS 7889:2012 Electric cables. Thermosetting insulated, non-armoured cables with a voltage of 600/1 000 V, for fixed installations


BS 7895:1997 Specification for bayonet lampholders with enhanced safety


Reconfirm


of 60 June 2016


BS 7896:1997 Securities. Specification for the format and structure of names and addresses used in securities transactions for the business of registrars


Reconfirm

BS 7901:2002 Specification for recovery vehicles and vehicle recovery equipment

MHE/3/-/14 Confirmed (2012)

Confirm

BS 7904:1998 Guide to smoke measurement units. Their basis and use in smoke opacity test methods


Reconfirm

BS 7905-1:2001

Lifting equipment for performance, broadcast and similar applications -- Specification for the design and manufacture of above stage equipment (excluding trusses and towers)


Reconfirm

BS 7905-2:2000

Lifting equipment for performance, broadcast and similar applications -- Specification for design and manufacture of aluminium and steel trusses and towers


Reconfirm

BS 7906-1:2005

Use of lifting equipment for performance, broadcast and similar applications -- Code of practice for installation, use and removal of above stage equipment (excluding trusses and towers)


Reconfirm

BS 7906-2:2000

Lifting equipment for performance, broadcast and similar applications -- Code of practice for use of aluminium and steel trusses and towers


Reconfirm

BS 7907:2007 Code of practice for the design and manufacture of children's clothing to promote mechanical safety

TCI/66/-/2 Confirmed (2012)

Withdraw

BS 7918-1:1999

Visual imperfections in rubber products -- Vocabulary PRI/73 Confirmed (2012)

Reconfirm

BS 7921:1998 Cone top cans of nominal volumes 125 ml to 1000 ml for liquid products. Specification


Reconfirm

BS 7929:1999 Guide for the verification of a pump casing design procedure


Reconfirm

BS 7951:2000 Electricity meters. Alternating-current single-phase static watt-hour telemeters of accuracy class 1 or 2


Reconfirm

BS 7952:2001 Specification for chemical firelighters in solid form used for the ignition of solid fuels in residential heating and cooking appliances


Reconfirm

BS 7955:1999 Containment nets and sheets on construction works. Specification for performance and test methods


Reconfirm

BS 7959-3:2007

Materials used for the control of liquid spillages -- Colour coding of sorbent materials


Reconfirm

BS 7962:2000 Black materials for masking existing road markings. Specification


Reconfirm

BS 7970:2012 Electric cables. Metal foil and longitudinally welded aluminium sheath constructions of power cables having XLPE insulation for rated voltages from 66 kV (U$dm = 72.5 kV) to 132 kV (U$dm = 145 kV)


BS 7971-2:2003

Protective clothing and equipment for use in violent situations and in training -- Guidance on risk assessment and on the selection, use, cleaning and maintenance of protective clothing and equipment


Reconfirm

BS 7971-3:2002

Protective clothing and equipment for use in violent situations and in training -- Personal defence shields. Requirements and test methods


Reconfirm


of 60 June 2016


BS 7971-4:2002

Protective clothing and equipment for use in violent situations and in training -- Limb protectors. Requirements and test methods


Reconfirm

BS 7971-8:2003

Protective clothing and equipment for use in violent situations and in training -- Blunt trauma torso, shoulder, abdomen and genital protectors. Requirements and test methods

PH/3/12 Current Confirm

BS 7971-11:2006

Protective clothing and equipment for use in violent situations and in training -- Foot and ankle protectors and foot protectors. Requirements and test methods

PH/3/12 Partially replaced by BS 7971-5:2016

Confirm

BS 7973-1:2001

Spacers and chairs for steel reinforcement and their specification -- Product performance requirements


Reconfirm

BS 7973-2:2001

Spacers and chairs for steel reinforcement and their specification -- Fixing and application of spacers and chairs and tying of reinforcement


Reconfirm

BS 7974:2001 Application of fire safety engineering principles to the design of buildings. Code of practice


Reconfirm

BS 7980:2003+A1:2012

Vehicle lifts. Installation, maintenance, thorough examination and safe use. Code of practice

MHE/12 Current Confirm

BS 7982:2001 Guidance on the environmental impact of large-scale fires involving plastics materials


Reconfirm

BS 7983:2001 Requirements for payphones for networks other than the ISDN


Reconfirm

BS 7989:2001 Specification for recirculatory filtration fume cupboards


Reconfirm

BS 7991:2001 Determination of the mode I adhesive fracture energy, G$dI$dC, of structural adhesives using the double cantilever beam (DCB) and tapered double cantilever beam (TDCB) specimens


Reconfirm

BS 8000-1:1989

Workmanship on building sites -- Code of practice for excavation and filling

B/526 Confirmed (2012); Partially replaced by BS 8000-0:2014

Reconfirm

BS 8000-4:1989

Workmanship on building sites -- Code of practice for waterproofing


Confirm

BS 8000-8:1994

Workmanship on building sites -- Code of practice for plasterboard partitions and dry linings


Reconfirm

BS 8000-9:2003

Workmanship on building sites -- Cementitious levelling screeds and wearing screeds. Code of practice

CB/300 Confirmed (2012); Partially replaced by BS 8000-0:2014

Confirm


of 60 June 2016


BS 8000-12:1989

Workmanship on building sites -- Code of practice for decorative wallcoverings and painting


Confirm

BS 8000-15:1990

Workmanship on building sites -- Code of practice for hot and cold water services (domestic scale)


Reconfirm

BS 8010-2.5:1989

Code of practice for pipelines. Pipelines on land: design, construction and installation -- Glass reinforced thermosetting plastics


Reconfirm

BS 8210:2012 Guide to facilities maintenance management FMW/1 Current Confirm

BS 8212:1995 Code of practice for dry lining and partitioning using gypsum plasterboard


Reconfirm

BS 8213-1:2004

Windows doors and rooflights -- Design for safety in use and during cleaning of windows, including door-height windows and roof windows. Code of practice


Reconfirm

BS 8217:2005 Reinforced bitumen membranes for roofing. Code of practice


Reconfirm

BS 8220-2:1995

Guide for security of buildings against crime -- Offices and shops


Reconfirm

BS 8221-1:2012

Code of practice for cleaning and surface repair of buildings -- Cleaning of natural stone, brick, terracotta and concrete


BS 8221-2:2000

Code of practice for cleaning and surface repair of buildings -- Surface repair of natural stones, brick and terracotta


Reconfirm

BS 8313:1997 Code of practice for accommodation of building services in ducts


Reconfirm

BS 8410:2007 Code of practice for lightweight temporary cladding for weather protection and containment on construction works


Reconfirm

BS 8415:2005+A2:2012

Monuments within burial grounds and memorial sites. Specification


BS 8424:2004 Building hardware. Pull handles. Requirements and test methods


Reconfirm

BS 8430:2005 Terminology work. Fundamentals made simple TS/1 Confirmed (2012)

Reconfirm

BS 8437:2005+A1:2012

Code of practice for selection, use and maintenance of personal fall protection systems and equipment for use in the workplace

PH/5 Current Confirm

BS 8445:2012 Bath and shower mats. Testing. Assessment of slip resistance properties

PRI/60 Current Confirm

BS 8450:2006 Code of practice for installation of electrical and electronic equipment in ships

JPEL/18 Confirmed (2012)

Reconfirm

BS 8467:2006 Protective clothing. Personal protective ensembles for use against chemical, biological, radiological and nuclear (CBRN) agents. Categorization, performance requirements and test methods


Reconfirm


of 60 June 2016


BS 8468-7:2012

Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents -- Closed-circuit breathing apparatus. Specification

PH/4 Current Confirm

BS 8469:2007 Personal protective equipment for firefighters. Assessment of ergonomic performance and compatibility. Requirements and test methods


Reconfirm

BS 8471:2007 Guide to particle sizing methods LBI/37 Confirmed (2012)

Reconfirm

BS 8475:2006 Instrumental colour measurement of textiles. Method TCI/81 Confirmed (2012)

Reconfirm

BS 8476:2007 Code of practice for the safe use of concrete pumps B/513/-/8 Confirmed (2012)

Reconfirm

BS 8490:2007 Guide to siphonic roof drainage systems B/505 Confirmed (2012)

Reconfirm

BS 8496:2007 Water quality. Enumeration of micro-organisms in water samples. Guidance on the estimation of variation of results with particular reference to the contribution of uncertainty of measurement

EH/3/4 Confirmed (2012)

Reconfirm

BS 8501:2002 PDF

Graphical symbols and signs. Public information symbols

PH/8/2 Current Withdraw

BS 8539:2012 Code of practice for the selection and installation of post-installed anchors in concrete and masonry


BS 8541-1:2012

Library objects for architecture, engineering and construction -- Identification and classification. Code of practice


BS 8541-3:2012

Library objects for architecture, engineering and construction -- Shape and measurement. Code of practice


BS 8541-4:2012

Library objects for architecture, engineering and construction -- Attributes for specification and assessment. Code of practice


BS 8552:2012 Sampling and monitoring of water from building services closed systems. Code of practice

EH/3/6 Current Confirm

BS 8560:2012 Code of practice for the design of buildings incorporating safe work at height


BS 8567:2012 Specification for outdoor electricity meter cupboards PEL/13 Current Confirm

BS 8573:2012 Electric cables. Thermosetting insulated, non-armoured cables with a voltage of 600/1 000V, for fixed installations, having low emissions of smoke and corrosive gases when affected by fire

GEL/20/17 Current Reconfirm

BS 8577:2012 Framework for the provision of financial advice and planning services. Specification

SVS/6/1 Current Confirm

BS 8581-1:2012

Exchanging course related information -- Course advertising profile. Specification

IST/43 Current Confirm

BS 8581-2:2012

Exchanging course related information -- Course advertising profile. Code of practice

IST/43 Current Confirm

BS 8587:2012 Guide to facility information management FMW/1 Current Confirm

BS 8621:2007+A2:2012

Thief resistant lock assembly. Keyless egress B/538 Current Confirm

BS 8747:2007 Reinforced bitumen membranes (RBMs) for roofing. Guide to selection and specification


Revision


of 60 June 2016


BS 8855-2:2000

Soil analysis -- Method for determination of coal tar-derived phenolic compounds


Reconfirm

BS 8887-1:2006

Design for manufacture, assembly, disassembly and end-of-life processing (MADE) -- General concepts, process and requirements


Reconfirm

BS 8887-211:2012

Design for manufacture, assembly, disassembly and end-of-life processing (MADE) -- Specification for reworking and remarketing of computing hardware

TDW/4/7 Current Confirm

BS 9133 N001 to 003:1975

Detail specification for single turn low power non-wirewound rotary potentiometers. Spindle insulated from resistance element, spindle and panel sealed or container, spindle and panel sealed. Full assessment level

EPL/40X Confirmed (2012)

Reconfirm

BS 9210 N007-2:1976

Detail specification for radio frequency connectors (type SMB). Unsealed, soldered, captive contact, 50 ohms, snap-on couplings -- Control drawings. Mating face details and gauge information


Reconfirm

BS 9210 N0009-2:1978

Detail specification for radio frequency connectors (series SMC). Unsealed, soldered, captive contact, 50 ohms, screw coupling -- Control drawings. Mating face details and gauge information


Reconfirm

BS 9220 N001:1971

Detail specification for ordinary rectangular (2:1) rigid waveguide tubing. Standard wall thickness. General application category


Reconfirm

BS 9220 N002:1971

Detail specification for medium flat rectangular (4:1) rigid waveguide tubing. Standard wall thickness. General application category


Reconfirm

BS 9220 N003:1971

Detail specification for flat rectangular (8.33:1) rigid waveguide tubing. Standard wall thickness. General application category


Reconfirm

BS 9220 N004:1971

Detail specification for circular rigid waveguide tubing. Standard wall thickness. General application category


Reconfirm

BS 9222:2007 Personal financial planning. Guidance on the application of BS ISO 22222 and assessment of compliance

SVS/6 Confirmed (2012)

Reconfirm

BS 10621:2007+A2:2012

Thief resistant dual-mode lock assembly B/538 Current Confirm

BS 2A 27:1962 Specification for steel hexagonal nuts (B.A. and B.S.F threads) (ordinary, thin, slotted and castle) for aircraft


Reconfirm

BS A 55 AND 56:1951+A3:2012

Specifications for grub screws for aeronautical purposes

ACE/12 Current Reconfirm

BS A 101:1969+A3:2012

Specification for general requirements for titanium bolts


BS 4A 102:2002+A2:2012

Specification for steel bolts (Unified hexagons and Unified threads) for aircraft


BS 3A 103:1962

Specification for steel nuts (Unified hexagons and Unified threads) (ordinary, thin, slotted and castle) for aircraft


Reconfirm


of 60 June 2016


BS 4A 104:2002+A2:2012

Specification for corrosion-resisting steel bolts (Unified hexagons and Unified threads), strength class 880 MPa, for aircraft


BS 3A 105:1962

Specification for corrosion-resisting steel nuts (Unified hexagons and Unified threads) (ordinary, thin, slotted and castle) for aircraft


Reconfirm

BS 3A 107:1962

Specification for aluminium alloy nuts (Unified hexagons and Unified threads) (ordinary and slotted) for aircraft


Revision

BS 4A 111:1993

Specification for cadmium-plated steel bolts (Unified hexagons and Unified threads) with close tolerance shanks


Reconfirm

BS 4A 112:1992

Specification for cadmium-plated steel shear bolts (Unified hexagons and Unified threads)


Revision

BS 4A 113:1999+A1:2012

Specification for cadmium-plated, mushroom-headed, unified-thread, slotted drive bolts


BS 4A 116:2012

Steel pan head bolts (Unified threads), cadmium plated, for aircraft


BS 4A 169:2002

Specification for aluminium alloy bolts (Unified hexagons and Unified threads) for aircraft


Reconfirm

BS 4A 170:1999+A1:2012

Specification for aluminium alloy, mushroom-headed, slotted drive, bolts (unified thread)


BS 2A 173:1962+A7:2012

Specification for 100$0D Countersunk head steel bolts (Unified threads), cadmium plated, for aircraft

ACE/12 Current Confirm

BS 3A 174:2012

100$0D Countersunk head, D-slot recess, corrosion-resisting steel bolts (Unified threads), Strength Class 880 MPa, for aircraft


BS 2A 175:1962

Specification for 100$0D countersunk head aluminium alloy bolts (Unified threads) for aircraft


Revision

BS 2A 210:1962

Specification for brass nuts (Unified hexagons and Unified threads) for aircraft


Reconfirm

BS A 226:1965 Specification for steel hexagon head bolts (short thread: Class 3A)


Reconfirm

BS A 227:1965 Specification for steel pan head bolts (short thread: Class 3A)


Reconfirm

BS 4A 228:1997

Specification for steel double hexagon bolts. 1250 MPa (180,000 lbf/in$u2) for aircraft


Reconfirm

BS 2A 229:1972

Specification for hexagonal head steel bolts 160000 lbf/in$u2 (1100/MPa)


Reconfirm

BS 2A 230:1974

Specification for 100$0D countersunk head steel bolts [1100 MPa with Hi-torque speed drive recesses]


Reconfirm

BS A 237-240:1971

Specification for plain hexagonal nut (of Class 3B UNJ thread)


Reconfirm

BS A 242; A 243; A 244; A 245:1974

Specification for hexagonal castle nuts (of Class 3B UNJ thread)


Reconfirm

BS A 246; A 247; A 248; A 249:1974

Specification for slotted hexagonal thick nuts (of Class 3B UNJ thread)


Reconfirm


of 60 June 2016


BS A 250; A 251; A 252; A 253:1974

Specification for slotted hexagonal shear nuts (of Class 3B UNJ thread)


Reconfirm

BS C 3:1964 Specification for aircraft material. Coupling dimensions for aircraft pressure re-oiling connection


Reconfirm

BS 2C 4:1973 Specification for coupling dimensions for aero-engine refrigerant pressure replenishment connections


Reconfirm

BS 2C 5:1976 Specification for mating dimensions for liquid oxygen replenishment couplings


Reconfirm

BS C 6:1966 Specification for aircraft engine nacelle fire extinguisher doors


Reconfirm

BS C 9:1970 Specification for coupling dimensions for high pressure air charging valves for aircraft


Reconfirm

BS C 10:1958 Coupling dimensions for aircraft ground air-conditioning connections


Reconfirm

BS 2C 13:1988 Specification for sizes of aircraft gravity filling orifices and associated replenishment nozzles (metric series)


Reconfirm

BS C 15:1960 Specification for coupling dimensions for aircraft-to-tractor tow bar connections


Reconfirm

BS C 16:1973 Specification for dimensions for gaseous oxygen replenishment couplings for aircraft


Reconfirm

BS C 17:1973 Specification for coupling dimensions for low pressure air connections for engine starting


Reconfirm

BS C 20:1986 Specification for aircraft gaseous oxygen replenishment connection (inch dimensions)


Reconfirm

BS 6F 49:2007 Specification for shuttle woven cotton webbing for aerospace purposes


Reconfirm

BS 3F 63:1981 Specification for low pressure oxygen hose for aeronautical purposes


Reconfirm

BS 3F 65:1991 Specification for flexible corrugated oxygen and air tubes for aircraft (natural or synthetic polyisoprene)


Reconfirm

BS 2F 66:1982 Specification for rubber bonded cork sheets ACE/65 Confirmed (2012)

Reconfirm

BS 2F 67:1980 Specification for hose for aviation fuel and engine lubricating oil for aeronautical purposes


Reconfirm

BS 4F 68:2002 Controlled storage of vulcanized rubbers for use in aerospace applications


Reconfirm

BS 3F 69:1979 Specification for packaging and identification of vulcanized rubber items


Reconfirm

BS 3F 70:1991 Specification for heavy duty braided rubber cord ACE/65 Confirmed (2012)

Reconfirm

BS 3F 71:1991 Specification for light duty braided rubber cord ACE/65 Confirmed (2012)

Reconfirm

BS 4F 111:2002

Flax harness webbing for aerospace purposes ACE/65 Confirmed (2012)

Reconfirm

BS 3F 114:1995

Specification for 80 g/m$u2 cotton madapolam fabric ACE/65 Confirmed (2012)

Reconfirm

BS 3F 116:1995

Specification for mercerized cotton fabric ACE/65 Confirmed (2012)

Reconfirm

BS 5F 118:2002

50 g/m$u2 nylon parachute fabric ACE/65 Confirmed (2012)

Reconfirm


of 60 June 2016


BS 4F 119:2002

145 g/m$u2 to 235 g/m$u2 nylon parachute fabric ACE/65 Confirmed (2012)

Reconfirm

BS 3F 126:2002

35 g/m$u2 nylon parachute fabric ACE/65 Confirmed (2012)

Reconfirm

BS F 137:1989 Specification for warp knitted cotton polishing and polish application cloths for aircraft transparencies


Reconfirm

BS F 138:1991 Specification for polyester plain (bobbin) netting suitable for aerospace purposes


Reconfirm

BS F 140:1991 Glossary of parachute terms ACE/65 Confirmed (2012)

Reconfirm

BS 2F 151:2007

Specification for shuttleless woven cotton webbing for aerospace purposes


Reconfirm

BS 2G 112:1956

Specification for air-driven directional gyroscopes for aircraft


Reconfirm

BS 2G 113:1956

Specification for manifold pressure gauges for aircraft ACE/1 Confirmed (2012)

Reconfirm

BS 2G 127:1967

Specification for power and current transformers for use in aircraft electrical power supply systems


Reconfirm

BS 2G 132:1981

Specification for general requirements for electromagnetically operated contactors for aircraft


Reconfirm

BS G 174:1959

Invertors for secondary electrical supplies for aircraft ACE/1 Confirmed (2012)

Reconfirm

BS G 175:1959

Aircraft fuel nozzle grounding plugs and sockets ACE/6 Confirmed (2012)

Reconfirm

BS 5G 178-1:1993

Crimped joints for aircraft electrical cables and wires. -- Specification for design requirements (including tests) for components and tools


Reconfirm

BS 4G 178-2:1986

Crimped joints for aircraft electrical cables and wires -- Specification for control of crimping (including user control tests)


Reconfirm

BS 2G 180:1974

Specification for permanent splicing of aircraft electrical cables


Reconfirm

BS 2G 191:1988

Specification for lighting for aircraft indicators using integral filament lamps


Reconfirm

BS G 193:1966

Specification for aircraft lampholders ACE/6 Confirmed (2012)

Reconfirm

BS 2G 196:1971

Specification for static invertors ACE/6 Confirmed (2012)

Reconfirm

BS 3G 197:1982

Specification for stud-type terminal blocks for terminations on aircraft electric cables


Reconfirm

BS 4G 198-1:1997

Sleeves for aircraft electric cables and equipment wires -- Specification for elastomeric sleeves for binding and identification


Reconfirm

BS 3G 198-2:1997

Sleeves for aircraft electric cables and equipment wires -- Specification for slip-on sleeves for identification purposes


Reconfirm

BS 4G 198-3:1999

Sleeves and moulded components for aircraft electric cables and equipment wires -- Specification for heat-shrinkable sleeving for binding, insulation, and identification

ACE/6/-/8 Confirmed (2012)

Reconfirm

BS 3G 198-4:1996

Sleeves for aircraft electric cables and equipment wires -- Specification for fluoropolymer heat shrinkable sleeving for binding and insulation


Reconfirm


of 60 June 2016


BS G 198-5:1997

Sleeves and moulded components for aircraft electric cables and equipment wires -- Specification for heat shrinkable moulded shapes


Reconfirm

BS 2G 201:1996

Specification for counter and pointer pressure altimeters


Reconfirm

BS 2G 202:1988

Specification for design and performance requirements for airframe-fit electrical connectors for d.c. and low frequency a.c. applications


Reconfirm

BS G 203:1967

Specification for Unified screws with captive facing and locking washers


Reconfirm

BS G 207:1969

Specification for aircraft electrical circuit diagrams ACE/6 Confirmed (2012)

Reconfirm

BS G 209:1970

Specification for transformer rectifier units ACE/6 Confirmed (2012)

Reconfirm

BS 3G 210:1996

Specification for PTFE insulated equipment wires and cables, single- and multi-core, with silver plated copper conductors (190$0DC) or nickel plated copper conductors (260$0DC)


Reconfirm

BS G 212:1971

Specification for general requirements for aircraft electrical cables


Reconfirm

BS G 217:1975

Specification for general requirements for cockpit lighting controllers


Reconfirm

BS G 222:1976

Specification for Efglas type electric cables (metric units)


Reconfirm

BS 2G 223:1989

Specification for screen terminating devices for aircraft electric cables


Reconfirm

BS 3G 230:2000

Specification for general requirements for aircraft electrical cables (second series)

ACE/6/-/2 Confirmed (2012)

Reconfirm

BS 2G 232:1987

Specification for electric cables for general airframe or equipment interconnect use (135$0DC), wrapped insulation


Reconfirm

BS 3G 233:1990

Specification for electric cables for general airframe or equipment interconnect use (135$0DC), extruded insulation


Reconfirm

BS G 235:1987

Specification for electric cables for general airframe or equipment interconnect use (150$0DC), wrapped insulation with silver plated conductors


Reconfirm

BS G 236:1987

Specification for electric cables for general airframe or equipment interconnect use (200$0DC), wrapped insulation with nickel plated conductors


Reconfirm

BS G 237:1987

Specification for electric cables for general airframe or equipment interconnect use (200$0DC), extruded insulation with nickel plated conductors


Reconfirm

BS 2G 238:1996

Specification for electric cables for general airframe or equipment interconnect use (260$0DC), nickel plated copper and copper alloy conductors, with wrapped insulation


Reconfirm

BS G 241:1988

Specification for fire proof electric cables for engine fire zone and airframe use


Reconfirm

BS G 242:1989

Specification for data bus interconnecting systems ACE/6 Confirmed (2012)

Reconfirm

BS G 243:1990

Specification for igniter cables for engine use (4 kV d.c.)


Reconfirm


of 60 June 2016


BS G 244:1989

Code of practice for installation/repair of aircraft electrical interconnection systems


Reconfirm

BS G 247-1:1992

Locator lights for airborne applications -- Specification for lifejacket lights


Reconfirm

BS G 247-2:1995

Locator lights for airborne applications -- Specification for liferaft lights


Reconfirm

BS 3HR 2:2010+A2:2012

Specification for nickel-chromium-cobalt-titanium-aluminiumheat-resistin g alloy billets, bars, forgings and parts (Nickel base, Cr19.5, Co 18.0 , Ti 2.5, Al 1.5)

ACE/61/-/48

Current Reconfirm

BS HC 7:1974 Specification for 3% chromium-molybdenum steel castings (880-1080 MPa)

ACE/61/-/15

Confirmed (2012)

Reconfirm

BS HC 8:1974+A2:2012

Specification for 3% chromium-molybdenum steel castings (1150–1300 MPa)


BS HC 9:1974+A2:2012

Specification for Nickel-chromium-molybdenum steel castings (880–1080 MPa)


BS HC 10:1974

Specification for nickel-chromium-molybdenum steel castings (1150-1300 MPa)

ACE/61/-/15

Confirmed (2012)

Reconfirm

BS 4HR 100:2010+A1:2012

Aerospace series. Procedure for inspection, testing and acceptance of wrought heat-resisting alloys


BS HC 103:1974

Specification for 23% chromium-nickel-tungsten corrosion-resisting steel castings (Cr 23, Ni 11, W 3)

ACE/61/-/15

Confirmed (2012)

Reconfirm

BS HC 106:1974

Specification for precipitaton hardening chromium-nickel-copper corrosion-resisting steel castings (1250-1500 MPa) (Cr 16, Ni 4, Cu 3)

ACE/61/-/15

Confirmed (2012)

Reconfirm

BS HR 251:1974

Specification for heat-resisting alloy plate, sheet and strip (Ni 25.5, Cr 14.7, Ti 1.8, Mn 1.5, Mo 1.2, V 0.3, Fe remainder)

ACE/61/-/48

Confirmed (2012)

Reconfirm

BS HC 502:1981

Specification for copper base aluminium-nickel-iron alloy castings (620 MPa) (Al 9.5, Ni 5, Fe 5)

ACE/61/-/16

Confirmed (2012)

Reconfirm

BS 4J 10:1991 Specification for pressure-sensitive adhesive water resistant PVC tape


Reconfirm

BS 4J 11:1991 Specification for pressure-sensitive adhesive paper masking tape


Reconfirm

BS L 164:1978 Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)

ACE/61/-/24

Confirmed (2012)

Reconfirm

BS L 165:1978 Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)

ACE/61/-/24

Confirmed (2012)

Reconfirm

BS 2L 169:2002

Ingots (as cast) and castings (solution treated and artificially aged) of aluminium-silicon-magnesium alloy (Si 7, Mg 0.6)

ACE/61/-/24

Confirmed (2012)

Reconfirm

BS M 32:1969 Specification for dimensions of aircraft accessory drives and mounting pads


Reconfirm

BS M 48:1975 Specification for dimensions of elastomeric toroidal sealing rings for aerospace use - inch series


Reconfirm

BS 3N 3:2000 Breathing oxygen for airborne applications ACE/1 Confirmed (2012)

Reconfirm


of 60 June 2016


BS N 5:1992 Specification for crew portable protective breathing equipment for use during aircraft emergencies


Reconfirm

BS N 6:1998 Specification for aeromedical portable oxygen concentrator systems. General requirements


Reconfirm

BS 4N 100-1:1999

Aircraft oxygen systems and equipment -- Design and installation


Reconfirm

BS 4N 100-2:1999

Aircraft oxygen systems and equipment. Tests for the compatibility of materials in the presence of oxygen


Reconfirm

BS 4N 100-3:1999

Aircraft oxygen systems and equipment -- Testing of equipment and systems


Reconfirm

BS 4N 100-4:1999

Aircraft oxygen systems and equipment -- Guide to the physiological factors


Reconfirm

BS 4N 100-6:1999

Aircraft oxygen systems and equipment -- Guidance and recommendations on the selection of materials for use with oxygen


Reconfirm

BS 5N 100-7:2002

Aircraft oxygen systems and equipment -- Guide to cleaning labelling and packaging


Reconfirm

BS 6SP 4:2000+A3:2012

Pins headed, plain shank, drilled, steel alloy and corrosion resisting steel with a strength class 880 MPa


BS SP 8:1939+A7:2012

Specification for turnbuckles (tension rod type) for aircraft purposes


BS SP 18 and 19:1949

Specification for washers for aircraft purposes (primarily for use with timber)


Reconfirm

BS SP 41-46:1951+A5:2012

Specifications for tab washers for B.A. and B.S.W. hexagons for aircraft


BS 2SP 47:1957

Single coil spring washers for aircraft ACE/12 Confirmed (2012)

Reconfirm

BS SP 49 and BS SP 50:1953+A1:2012

Specifications for Ball ends for swaging on cable. For aircraft (Suitable for 5 cwt. cable)


BS SP 51 and 52:1953+A3:2012

Specifications for identification tags for swaged cable-end assemblies. For aircraft


BS SP 59 and SP 60:1955+A1:2012

Specifications for Spring catches for aeronautical purposes


BS SP 66 and SP 67:1955+A2:2012

Specifications for Cable thimbles for aircraft ACE/12 Current Confirm

BS 7S 80:2002 High chromium-nickel corrosion resisting steel forging stock, bars, forgings and parts (880 to 1080 MPa: limiting ruling section 100 mm)

ACE/61/-/15

Confirmed (2012)

Reconfirm

BS 2SP 93:1974

Specification for elastomeric grommets (acrylonitrile-butadiene) for aerospace use


Reconfirm

BS 2SP 95:1974

Specification for elastomeric grommets (polychloroprene) for aerospace use


Reconfirm


of 60 June 2016


BS SP 107-112:1954+A5:2012

Specifications for tab washers for unified hexagons for aircraft


BS SP 113:1954

Specification for cadmium plated close tolerance shear pins for aircraft


Reconfirm

BS SP 115 to 117:1956

Specifications for hydraulic surface-check type lubricating nipples for aircraft


Reconfirm

BS SP 119-120:1957+A2:2012

High tensile steel fork joints (Unified threads). For aircraft


BS SP 121:1958

Collars for shear pins for aircraft ACE/12 Confirmed (2012)

Reconfirm

BS SP 134 to SP 138:1968+A1:2012

Specification for Copper beryllium crinkle washers ACE/12 Current Confirm

BS 2S 136:1977

Specification for 1% carbon-chromium steel (vacuum arc remelted) billets, bars, forgings and parts (limiting ruling section 25 mm)

ACE/61/-/15

Confirmed (2012)

Reconfirm

BS SP 139 and SP 140:1969+A2:2012

Specification for Corrosion-resisting steel crinkle washers


BS 2S 140:1976

Specification for 2 1/2% nickel-chromium-molybdenum steel billets, bars, forgings and parts (1080-1280 MPa: limiting ruling section 150 mm)

ACE/61/-/15

Confirmed (2012)

Reconfirm

BS SP 141:1970

Specification for design and performance requirements for toggle type panel fasteners


Reconfirm

BS SP 144-147:1971

Specification for corrosion resisting worm drive clamps for aircraft


Reconfirm

BS 2SP 148-150:1979

Specification for Unified aluminium alloy washers ACE/12 Confirmed (2012)

Reconfirm

BS S 150:1975 Specification for chromium-molybdenum-vanadium-niobium heat-resisting steel billets, bars, forgings and parts (930-1080 MPa) (Cr 10.5, Mo 0.6, V 0.2, Nb 0.3)

ACE/61/-/15

Confirmed (2012)

Reconfirm

BS S 151:1975 Specification for chromium-nickel-molybdenum-vanadium heat-resisting steel billets, bars, forgings and parts (930-1130 MPa: limiting ruling section 150 mm) (Cr 12, Ni 2.5, Mo 1.7, V 0.3)

ACE/61/-/15

Confirmed (2012)

Reconfirm

BS 2SP 151-153:1979

Specification for Unified alloy steel washers ACE/12 Confirmed (2012)

Revision

BS S 152:1975 Specification for chromium-cobalt-molybdenum-vanadium-niobium heat-resisting steel billets, bars, forgings and parts (consumable electrode remelted) (1000-1140 MPa) (Cr 10.5, Co 6, Mo 0.8, V 0.2, Nb 0.3)

ACE/61/-/15

Confirmed (2012)

Reconfirm

BS 2SP 154-156:1979

Specification for Unified corrosion-resistant steel washers


Reconfirm

BS 2SP 157-163:1973

Specification for solid rivets with universal head made from BS L 86 (SP 157 and 163), BS L 58 (SP 160 and 161), BS L 37 (SP 162) and DTD 204 (SP 158 and 159) materials


Revision


of 60 June 2016


BS S 162:1990 Specification for 18% nickel-cobalt-molybdenum maraging steel forging stock, forgings, bars and parts (1800 MPa: double vaccuum melted)

ACE/61/-/15

Confirmed (2012)

Reconfirm

BS SP 164:1978

Specification for design and performance requirements for turnlock, stud-type panel fasteners (metric series)


Reconfirm

BS S 164:2002 1 % Chromium-molybdenum steel billets, bars, forgings and parts. (1150 to 1300 MPa: Limiting ruling section 16 mm) (Suitable for welding)

ACE/61/-/15

Confirmed (2012)

Reconfirm

BS 3SP 168-169:2002

Ferrules and assembly wires for braided rubber cord assemblies for aerospace use


Reconfirm

BS 3SP 170-171:2002

Braided rubber cord assemblies for aerospace use ACE/65 Confirmed (2012)

Reconfirm

BS S 206:1999 Chromium-nickel-aluminium corrosion resisting steel (precipitation hardening) rod, cold drawn wire and springs

ACE/61/-/15

Confirmed (2012)

Reconfirm

BS 2S 513:1970

Specification for spring steel strip ACE/61/-/15

Confirmed (2012)

Reconfirm

BS S 532:1969 Specification for chromium-nickel-copper-molybdenum corrosion-resisting steel sheet and strip (precipitation hardening: 980/1180 MPa)

ACE/61/-/15

Confirmed (2012)

Reconfirm

BS S 533:1969 Specification for chromium-nickel-copper-molybdenum corrosion-resisting steel sheet and strip (precipitation hardening: 1180/1370 MPa)

ACE/61/-/15

Confirmed (2012)

Reconfirm

BS S 534:1969 Specification for chromium-molybdenum steel sheet and strip (880/1080 MPa (suitable for welding)

ACE/61/-/15

Confirmed (2012)

Reconfirm

BS S 535:1969 Specification for chromium-molybdenum steel sheet and strip (1150/1300 Mpa) (suitable for welding)

ACE/61/-/15

Confirmed (2012)

Reconfirm

BS S 538:1975 Specification for chromium-nickel-molybdenum-vanadium heat-resisting steel sheet and strip (930-1130 MPa: maximum thickness 6 mm) (Cr 12, Ni 2.5, Mo 1.7, V 0.3)

ACE/61/-/15

Confirmed (2012)

Reconfirm

BS 3T 53:1980 Specification for chromium-molybdenum steel tube (700 MPa) (outside diameter not less than 12.5 mm) (weldable)

ACE/61/-/15

Confirmed (2012)

Reconfirm

BS 3T 60:1980 Specification for chromium-molybdenum steel tube (1150 MPa) (maximum thickness 8 mm)

ACE/61/-/15

Confirmed (2012)

Reconfirm

BS 2T 66:1980 Specification for 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 550 MPa) (weldable)

ACE/61/-/15

Confirmed (2012)

Reconfirm

BS 2T 68:1980 Specification for cold drawn 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 800 MPa) (weldable)

ACE/61/-/15

Confirmed (2012)

Reconfirm

BS T 72-T 73:1977

Specifications for 18/10 chromium-nickel corrosion-resisting steel tube for hydraulic purposes (niobium/titanium stabilized: 550 MPa)

ACE/61/-/15

Confirmed (2012)

Reconfirm

BS T 76:1978 Specification for chromium-molybdenum steel tube (770 MPa) (weldable)

ACE/61/-/15

Confirmed (2012)

Reconfirm

BS T 77:1980 Specification for chromium-molybdenum steel tube (900 MPa) (weldable)

ACE/61/-/15

Confirmed (2012)

Reconfirm

BS 2W 11:1967

Specification for aircraft material. Preformed corrosion-resisting steel wire rope


Reconfirm

BS 2W 12:1989

Specification for preformed zinc coated carbon steel wire rope (metric and inch series)


Reconfirm


of 60 June 2016


BS 2X 26:2001 Doping and finishing schemes for fabric covered aircraft


Reconfirm

BS AU 50-1.8:1989

Tyres and wheels. Tyres. -- Code of practice for the storage of tyres, inner tubes and flaps

AUE/4 Confirmed (2012)

Reconfirm

BS AU 50-1.0d:1998

Tyres and wheels. Tyres -- General AUE/4 Confirmed (2012)

Reconfirm

BS AU 50-1.5.1:1994

Tyres and wheels. Tyres. Industrial vehicle tyres -- Specification for code-designated series tyres


Reconfirm

BS AU 50-2.6a:1983

Tyres and wheels. Wheels and rims -- Specification for road wheels manufactured wholly or partly of light alloy for mopeds and motor cycles


Reconfirm

BS AU 50-2.8a:1985

Tyres and wheels. Wheels and rims -- Code of practice for the selection and care of wheels for passenger cars (including caravans and light trailers)


Reconfirm

BS AU 50-2.3:1994

Tyres and wheels. Wheels and rims -- Specification for road-wheel nuts, studs and bolts for commercial vehicles


Reconfirm

BS AU 50-2.7a:1995

Tyres and wheels. Wheels and rims -- Code of practice for the selection and care of tyres and wheels for commercial vehicles


Reconfirm

BS AU 50-2.5c:1996

Tyres and wheels. Wheels and rims -- Specification for road wheels manufactured wholly or partly of cast light alloy for passenger cars


Reconfirm

BS AU 50-3.7:1985

Tyres and wheels. Valves -- Section 7: Code of practice for the selection and care of tyre inflation valves for passenger cars (including cartavens and light vehicles


Reconfirm

BS AU 50-3.8:1985

Tyres and wheels. Valves -- Section 8a: Code of practice for the selection and care of tyre inflation valves for commercial vehicles


Reconfirm

BS AU 50-4.5.1:1995

Tyres and wheels. Rim profiles and dimensions. Industrial vehicle rims -- Specification for rim profiles and dimensions for code-designated series tyres


Reconfirm

BS AU 88a:1985

Recommendations for ratings for light duty cables for automobile use


Reconfirm

BS AU 110a:1995

Specification for rubber hoses and hose assemblies for automotive air pressure braking systems


Reconfirm

BS AU 138b:2000

Towing vehicle, trailer and semi-trailer pneumatic braking systems. "Contact" type couplings


Reconfirm

BS AU 144f:1988

Specification for retreaded car and commercial vehicle tyres


Reconfirm

BS AU 193a:1990

Specification for replacement motor cycle and moped exhaust systems


Reconfirm

BS AU 237a:1993

Specification for light domestic duty jumper lead sets for automotive starting


Reconfirm

BS AU 251:1994

Specification for performance of automotive laminated windscreen repair systems


Reconfirm

BS AU 258:1995

Specification for elasticated straps AUE/9 Confirmed (2012)

Reconfirm

BS MA 5:1970 Specification for brass service nameplates for valves SME/32 Confirmed (2012)

Reconfirm

BS MA 25:1973

Specification for ships' windows SME/32 Confirmed (2012)

Reconfirm


of 60 June 2016


BS MA 28:1973

Specification for dimensions of tracks for mast and deck fittings


Reconfirm

BS MA 29:1982

Specification for steel wire rope and strand for yachts GME/33 Confirmed (2012)

Reconfirm

BS MA 41:1975

Specification for two tonne general purpose davits MHE/3/3 Confirmed (2012)

Reconfirm

BS MA 47:1977

Code of practice for ships' cargo blocks MHE/3/-/6 Confirmed (2012)

Reconfirm

BS MA 48:1976

Code of practice for design and operation of ships' derrick rigs

MHE/3/-/6 Confirmed (2012)

Reconfirm

BS MA 57:1975

Specification for ships' deck machinery - rope storage reels

SME/32 Confirmed (2012)

Reconfirm

BS MA 81:1980

Specification for ships' derrick fittings MHE/3/3 Confirmed (2012)

Reconfirm

CP 143-5:1964 Code of practice for sheet roof and wall coverings -- Code of practice for sheet roof and wall coverings. Zinc


Reconfirm

CP 143-10:1973

Code of practice for sheet roof and wall coverings -- Code of practice for sheet roof and wall coverings. Galvanized corrugated steel. Metric units


Reconfirm

CP 143-12:1970

Code of practice for sheet roof and wall coverings -- Code of practice for sheet roof and wall coverings. Copper. Metric units


Reconfirm

CP 143-15:1973

Code of practice for sheet roof and wall coverings -- Code of practice for sheet roof and wall coverings. Aluminium. Metric units


Reconfirm

CP 342-2:1974 Code of practice for centralized hot water supply -- Buildings other than individual dwellings


Reconfirm

CP 3000:1955 Code of practice on the installation and maintenance of underfeed stokers


Reconfirm

DD 253:2001 Mouthguards for use in sport and recreation. Requirements and test methods


Withdraw

DD 263:2010 Intruder and hold-up alarm systems. Commissioning, maintenance and remote support. Code of practice

GW/1/2 Confirmed (2015)

Withdraw

DD 7971-9:2005

Protective clothing and equipment for use in violent situations and in training -- Training suits and equipment. Requirements and test methods


Withdraw

PD 308:1996 Guide to the European standards for engineering drawing in the BS EN series


Reconfirm

PD 476-3:2012 Classification rules for the end-use application of test results arising from BS 476-3, "Classification and method of test for external fire exposure of roofs"

FSH/22/-/8 Current Confirm

PD 5454:2012 Guide for the storage and exhibition of archival materials

IDT/2/9 Current Confirm

PD 6434:1969 Recommendations for the design and testing of smoke reducing solid fuel burning domestic appliances


Reconfirm

PD 6438:1969 A review of present methods for design of bolted flanges for pressure vessels


Reconfirm

PD 6457:1970 Guide to the application of addendum modification to involute spur and helical gears


Reconfirm


of 60 June 2016


PD 6470:1981 The management of design for economic production. Standardization philosophy aimed at improving the performance of the electrical and mechanical manufacturing sectors

TDW/4/7 Confirmed (2012)

Reconfirm

PD 6494:1980 Mismatch of screw thread systems FME/9 Confirmed (2012)

Reconfirm

PD 6497:1982 Stresses in horizontal cylindrical pressure vessels supported on twin saddles: a derivation of the basic equations and constants used in G.3.3 of BS 5500:1982


Reconfirm

PD 6507:1982 Guidance on metric screw threads and fasteners for use by model engineers


Reconfirm

PD 6508:1985 Detail drawings for the apparatus specified in BS 476:Part 11:1982


Reconfirm

PD 6516:1987 Guide to guarding fires and heating appliances CW/1 Confirmed (2012)

Reconfirm

PD 6520:1988 Guide to fire test methods for building materials and elements of construction


Reconfirm

PD 6527:1990 Methods of test for textiles (other than those methods already published as British Standards)


Reconfirm

PD 6537-1:1993

Variability of methods of test for textiles and reports of interlaboratory trials on certain methods -- Phase 1: BS 2576, BS 4303 and ISO 9290


Reconfirm

PD 6537-2:1994

Variability of methods of test for textiles and reports of inter-laboratory trials on certain methods. -- Phase 2. BS 3320, BS 2010 and BS 1932


Reconfirm

PD 6550-1:1989

Explanatory supplement to BS 5500:1988. Specification for unfired fusion welded pressure vessels. Section three. Design -- Domed ends (heads)


Reconfirm

PD 6550-2:1989

Explanatory supplement to BS 5500:1988. Specification for unfired fusion welded pressure vessels. Section three. Design -- Openings and branch connections


Reconfirm

PD 6550-3:1989

Explanatory supplement to BS 5500:1988. Specification for unfired fusion welded pressure vessels. Section three. Design -- Vessels under external pressure


Reconfirm

PD 6550-4:1989

Explanatory supplement to BS 5500:1988. Specification for unfired fusion welded pressure vessels. Section three. Design -- Heat exchanger tubesheets


Reconfirm

PD 6577:1995 The influence of environmental conditions on the testing of textile materials


Reconfirm

PD 6584:1995 Model for a supplier quality assurance assessment questionnaire


PD 6609:2007 Environmental cleanliness in enclosed spaces. Guide to in situ high efficiency filter leak testing


Reconfirm

PD 6614:2002 Obsolescence management. Guide to the substitution of components in electronic equipment

DS/1/2 Confirmed (2012)

Reconfirm

PD 6615:1998 Guide to setting up a parts database DS/1/2 Confirmed (2012)

Reconfirm


of 60 June 2016


PD 6667:2000 Obsolescence management. Code of practice for obsolescence notification and support from suppliers of electronic components

DS/1/2 Confirmed (2012)

Reconfirm

PD 6677:2002 Implementation guide for NATO AQAP-160 incorporating all AQAP-160 text and relevant ISO text


Withdraw

PD 6678:2005 Guide to the specification of masonry mortar B/519 Confirmed (2012)

Reconfirm

PD 6688-1-2:2007

Background paper to the UK National Annex to BS EN 1991-1-2


Reconfirm

PD 6693-1:2012

Recommendations for the design of timber structures to Eurocode 5: Design of timber structures -- General. Common rules and rules for buildings


PD 6695-2:2008+A1:2012

Recommendations for the design of bridges to BS EN 1993


PD 6696-2:2007+A1:2012

Background paper to BS EN 1994-2 and the UK National Annex to BS EN 1994-2

B/525/4 Current Reconfirm

PD 6699-1:2007

Nanotechnologies -- Good practice guide for specifying manufactured nanomaterials

NTI/1 Confirmed (2012)

Reconfirm

PD 6699-2:2007

Nanotechnologies -- Guide to safe handling and disposal of manufactured nanomaterials

NTI/1 Confirmed (2012)

Reconfirm

PD 7974-2:2002

Application of fire safety engineering principles to the design of buildings -- Spread of smoke and toxic gases within and beyond the enclosure of origin (Sub-system 2)


Reconfirm

PD 7974-8:2012

Application of fire safety engineering principles to the design of buildings -- Property protection, business and mission continuity, and resilience

FSH/24 Current Reconfirm

PD 8010-4:2012

Pipeline systems -- Steel pipelines on land and subsea pipelines. Code of practice for integrity management

PSE/17/2 Current Confirm

PD 8888:2001 Technical product documentation (TPD). An interim report


Reconfirm

PD 25888:2011

Business continuity management. Guidance on organization recovery following disruptive incidents

CAR/1 Current Confirm

You must include BS identifier Committeeshop.bsigroup.com/upload/278370/BSI-standards-being...BS 143...

Documents

Transcript of You must include BS identifier Committeeshop.bsigroup.com/upload/278370/BSI-standards-being...BS 143...