Sheet1QUOTED BY:-M/S Shivam Engineers,818-Laxmideep Building,District centre,Vikas Marg,Delhi-110092QUOTED FOR:-M/S Kinden India Pvt.Ltd.GurgaonPROJECT:-M/S YKK INDIA,BAWAL(Haryana)BILL OF MATERIALS31.05.2013Sr. No.DescriptionUnitQtySupplyInstallationUnit PriceUnit TotalUnit PriceUnit TotalIPHASE - I : REMOVING WORKS.

1POWER for MACHINE :1.1Removal the existing Power distribution panel PCC-3 at Phase -I area(w:2400,h:2000,d:400)Job10.012,500.0012,500.000.00.02LIGHTING SYSTEM :0.00.02.1Removal the existing Lighting distribution panel LCC-1 at Phase -I area, after removing the Incoming and Outgoing cable terminations and storing the panel in a separate location. 0.00.0Incoming cable : 3.5c x 120 sq.mm Alu. Ar Cable 0.00.0Outgoing cables / Wires : 3R, 2.5 Sq.mm Copper flexible cable in conduit / Raceways. - 11 Circuits0.00.0Outgoing cables / Wires : 3R, 4.0 Sq.mm Copper flexible cable in condduit / Raceways. - 3 CircuitsJob10.020,000.0020,000.000.00.02.2Removal the existing Lighting distribution panels LCC-2 at Phase - I area, after removing the Incoming and Outgoing cable terminations and storing the panel in a separate location. 0.00.0Incoming cable : 3.5c x 120 sq.mm Alu. Ar Cable 0.00.0Outgoing cables / Wires : 3R, 2.5 Sq.mm Copper flexible cable in conduit / Raceways. - 13 Circuits0.00.0Outgoing cables / Wires : 3R, 4.0 Sq.mm Copper flexible cable in condduit / Raceways. - 8 Circuits0.00.0Outgoing cables / Wires : 4c x 6.0 Sq.mm Copper cable in conduit / Raceways. - 1 CircuitJob10.025,000.0025,000.000.00.02.3Removal the existing Lighting distribution panels LCC-3 at Phase - I area, after removing the Incoming and Outgoing cable terminations and storing the panel in a separate location. 0.00.0Incoming cable : 3.5c x 120 sq.mm Alu. Ar Cable 0.00.0Outgoing cables / Wires : 3R, 2.5 Sq.mm Copper flexible cable in conduit / Raceways. - 10 Circuits0.00.0Outgoing cables / Wires : 3R, 4.0 Sq.mm Copper flexible cable in condduit / Raceways. - 4 Circuits0.00.0Outgoing cables / Wires : 4c x 6.0 Sq.mm Copper cable in conduit / Raceways. - 1 CircuitJob10.020,000.0020,000.000.00.02.4Removing of the 50mm x 50 mm x 2400mm (Length) MS sheet steel Powder coated Race way covers for removing the lighting wirings laid in the raceways and storing them in a safe work place.Mtrs13550.075.00101,625.000.00.02.5Removing of the 3 runs of 2.5 Sq.mm Copper flexible wires in Race ways for lighting circuits, removing the terminations in the fittings and storing.Mtrs24200.015.0036,300.000.00.02.6Removing the Flourscent tube, Reflector and the cover of the light fixtures for disconnecting the circuit wires and storing them in a safe working place.Nos3650.0125.0045,625.000.00.03POWER SOCKET SYSTEM :0.00.03.1Removing the existing power socket wiring in 25mm dia GI pipe with 3runs of 4.0 Sq.mm copper wires from LCC panels - 1,2 & 3 which is clamped along the wall / RSJ Coloumns etc.,Mtrs6650.030.0019,950.000.00.03.2Removing the existing power socket wiring in 32mm dia GI pipe with 4c x 6 Sq.mm copper cable from LCC panels - 1,2 & 3 which is clamped along the wall / RSJ Coloumns etc.,Mtrs1500.035.005,250.000.00.03.3Removing the existing 1 Gang, Single Phase 6/16A, receptacle mounted in Thermoplastic plate GI Box - Plug and socket outlets mounted over wall surface / RSJ Coloumns etc., Nos10.075.0075.000.00.03.4Removing the existing 2 Gang, Single Phase 6/16A, receptacle mounted in Thermoplastic plate with GI Box - Plug and socket outlets mounted over wall surface / RSJ Coloumns etc., Nos230.0100.002,300.000.00.03.5Removing the existing Three Phase 63A, 5 Pin rotary type Industrial socket with 4P MCB and 20A, Single Phase rotary type industrial soccket with DP MCB in a powder coated enclosure box. Nos40.0200.00800.000.00.03.6Finishing the surface of the existing Plug & Socket mounted area and repainting the surface and making the surface good. (In Civil Scope )Nos28CIVIL SCOPE0.00.00.04EMERGENCY & EXIT LIGHTING SYSTEM : 0.00.04.1Removing the existing Emergency lights mounted over wall surface / Coloumns / From ceiling and storing in a safe workplace.Nos340.0125.004,250.000.00.04.2Removing the existing Emergency lighting wiring with 3 Runs of 2.5 Sq.mm copper wires in 25mm dia GI pipe / Raceways / clamped along the wall / RSJ Coloumns etc.,Mtrs5000.030.0015,000.000.00.04.3Removing the existing Exit lights / Exit Indicators mounted over wall surface / Coloumns / From ceiling and storing in a safe workplace.Nos130.0100.001,300.000.00.04.4Removing the existing Exit lighting wiring with 3 Runs of 2.5 Sq.mm copper wires laid in 25mm dia GI pipe / Raceways clamped along the wall / ceiling / RSJ Coloumns etc.,Mtrs3450.030.0010,350.000.00.0IIPHASE - I : SUPPLY & INSTALLATION WORKS.0.00.00.00.01POWER for MACHINE :0.00.01.1LV Power Panel : PP-10.00.0Supply, Installation, Testing and Commissioning of 415V, 3Phase, 4 Wire sheet steel fabricated, dust and vermin proof, Cubicle, Indoor type, free standing floor mounted expandable type fabricated out of 1.6mm CRCA sheet steel complete with 200A, Aluminium Busbars, Adequate cable alley for terminating Incoming and Outgoing cables with detachable Gland plates, complete terminal block arrangement with ferrule markings, Space Heater, Proper ventillation arrangements complete with powder coated finish and comprising of.,0.00.0Incoming : 160A, 4P MCCB with microprocessor based O/C relay, with On/OFF and Phase Indication lamps. 0.00.0Meterings: Digital Multi function meter with 3 Nos 200/5A,15VA, Cl:1 CT, Control wirings and control MCB's (Schneider Power logic series : PM850)0.00.0Busbars : 200A, 3 Phase Aluminium Busbars with heat shrikable coloured sleeves. 0.00.0Outgoings :16 Nos, 63A, TP&N MCB with 4R, 16 Sq.mm Copper wires wired to the outgoing terminal blocks at cable ally. Nos1227,200.00227,200.0012,500.0012,500.000.00.01.2LV Power Panel : PP-20.00.0Supply, Installation, Testing and Commissioning of 415V, 3Phase, 4 Wire sheet steel fabricated, dust and vermin proof, Cubicle, Indoor type, free standing floor mounted expandable type fabricated out of 1.6mm CRCA sheet steel complete with 250A, Aluminium Busbars, Adequate cable alley for terminating Incoming and Outgoing cables with detachable Gland plates, complete terminal block arrangement with ferrule markings, Space Heater, Proper ventillation arrangements complete with powder coated finish and comprising of.,0.00.0Incoming : 250AF/200AT, 4P MCCB with microprocessor based O/C relay, with On/OFF and Phase Indication lamps. 0.00.0Meterings: Digital Multi function meter with 3 Nos 250/5A,15VA, Cl:1 CT, Control wirings and control MCB's (Schneider Power logic series : PM 850)0.00.0Busbars : 250A, 3 Phase Aluminium Busbars with heat shrikable coloured sleeves. 0.00.0Outgoings :22 Nos, 63A, TP&N MCB with 4R, 16 Sq.mm Copper wires wired to the outgoing terminal blocks at cable ally. Nos1255,000.00255,000.0012,500.0012,500.000.00.01.3LV Power Panel : PP-30.00.0Supply, Installation, Testing and Commissioning of 415V, 3Phase, 4 Wire sheet steel fabricated, dust and vermin proof, Cubicle, Indoor type, free standing floor mounted expandable type fabricated out of 1.6mm CRCA sheet steel complete with 100A, Aluminium Busbars, Adequate cable alley for terminating Incoming and Outgoing cables with detachable Gland plates, complete terminal block arrangement with ferrule markings, Space Heater, Proper ventillation arrangements complete with powder coated finish and comprising of.,0.00.0Incoming : 100A, 4P MCCB with microprocessor based O/C relay, with On/OFF and Phase Indication lamps. 0.00.0Meterings: Digital Multi function meter with 3 Nos 100/5A,15VA, Cl:1 CT, Control wirings and control MCB's (Schneider Power logic series : PM 850)0.00.0Busbars : 100A, 3 Phase Aluminium Busbars with heat shrikable coloured sleeves. 0.00.0Outgoings :9 Nos, 63A, TP&N MCB with 4R, 16 Sq.mm Copper wires wired to the outgoing terminal blocks at cable ally. Nos1203,000.00203,000.0011,500.0011,500.000.00.01.4Supply and Installation of Feeder Box for LV Busbar Trunking system (Make: M/s EAE Cat no.KAP0605BB) Nos363,100.00111,600.00650.0023,400.000.00.01.5Supply, Installation, Testing and Commissioning of LV Busbar Trunking system ( Make: M/s EAE, Cat no.KAP0604) Nos1448,715.001,254,960.00600.0086,400.000.00.01.6Supply and Installation of End Box for LV Busbar trunking system (Make: M/s EAE, Cat no.KAP0605BS)Nos363,100.00111,600.00300.0010,800.000.00.01.7Supply, Installation of Tap Off Plug for the LV Busbar Trunking system (Make: M/s EAE Cat no.KAP16-KL123)Nos1921,500.00288,000.00150.0028,800.000.00.01.8Supply and installation of suitable supporting Material with drop rod arrangement from roofing supports for the LV Busbar trunking system (The distance between supports should be maintained within 1500mm)Lot1150,000.00150,000.0015,000.0015,000.000.00.01.9Supply and Laying of 10 Sq.mm Copper flexible cable for earthing from cable tray to the Busbar Trunking system along with the respective power cable. Mtrs183592.00168,820.0020.0036,700.001.10Supply and tagging of cable tie for WiresLot13,500.003,500.002,500.002,500.000.00.01.11Supply, Laying, testing and Commissioning of the following 1.1kV Grade XLPE insulated, PVC sheathed , armoured cable in existing cable trays and clamping.0.00.0a) 4c x 16 Sq.mm Cu XLPE Ar PVC cableMtrs1470633.00930,510.0050.0073,500.00b) 3.5c x 50 Sq.mm Al XLPE Ar PVC cableMtrs315226.0071,190.0075.0023,625.00c) 3.5c x 150 Sq.mm Al XLPE Ar PVC cableMtrs730580.00423,400.00110.0080,300.00d) Supply and fixing of cable identification tags at both Panel and at load ends of the cable.Lot15,000.005,000.002,500.002,500.00e) Supply and Installation of supporting Material for LT Cables over Cable tray / from the roof level angular supports.Lot15,000.005,000.003,500.003,500.000.00.01.12Supply and making terminations for the following 1.1kV Grade XLPE Insulated PVC sheathed cables using Double Compression cable glands, Copper / Aluminium Lugs, fastening with G.I hardwares with proper colour coded insulating sleeves at cable ends. 0.00.0a) 4c x 16 Sq.mm Cu XLPE Ar PVC cableSets36350.0012,600.00100.003,600.00b) 3.5c x 50 Sq.mm Al XLPE Ar PVC cableSets2570.001,140.00125.00250.00c) 3.5c x 150 Sq.mm Al XLPE Ar PVC cableSets41,095.004,380.00175.00700.000.00.01.13Supply and Installation of the following Hot dip Galvanized Perforated type cable tray including fittings such as coupling plates, Pre fabricated bends, Tee's , Reducers and Angular offset sections etc.,0.00.0a) 150mm x 50mm x 2.0mm (Thick) cable TrayMtrs125538.0067,250.00125.0015,625.00b) 200mm x 50mm x 2.0mm (Thick) Cable TrayMtrs15645.009,675.00125.001,875.00c) Supporting Material for Cable tray from exisitng roof level angles using G I threaded rods / angle frames, clamping arrangements etc.,Lot125,000.0025,000.005,000.005,000.000.00.02LIGHTING SYSTEM :0.00.02.1LV Lighting Panel : LCC-1 & LCC-20.00.0Supply, Installation, Testing and Commissioning of 415V, 3Phase, 4 Wire sheet steel fabricated, dust and vermin proof, Cubicle, Indoor type, free standing floor mounted expandable type fabricated out of 1.6mm CRCA sheet steel complete with 100A, Aluminium Busbars, Adequate cable alley for terminating Incoming and Outgoing cables with detachable Gland plates, complete terminal block arrangement with ferrule markings, Space Heater, Proper ventillation arrangements complete with powder coated finish and comprising of.,0.00.0Incoming : 100A, 4P MCCB with microprocessor based O/C relay, with On/OFF and Phase Indication lamps. 0.00.0Meterings: Digital Multi function meter with 3 Nos 100/5A,15VA, Cl:1 CT, Control wirings and control MCB's0.00.0Busbars : 100A, 3 Phase Aluminium Busbars with heat shrikable coloured sleeves. 0.00.0Outgoings :21 Nos, 20A, DP MCB with 3R, 2.5 Sq.mm Copper wires wired to the outgoing terminal blocks at cable ally. (Each 7 Nos MCB Outgoings has to be segregated in separate chamber for each phase)0.00.0Note : A separate chamber for outgoing circuits to be provided with 16Nos, 2 Way , 16A Modular switches as per enclosed SLD .Nos2198,200.00396,400.0011,500.0023,000.000.00.02.2LV Lighting Panel : LCC-30.00.0Supply, Installation, Testing and Commissioning of 415V, 3Phase, 4 Wire sheet steel fabricated, dust and vermin proof, Cubicle, Indoor type, free standing floor mounted expandable type fabricated out of 1.6mm CRCA sheet steel complete with 100A, Aluminium Busbars, Adequate cable alley for terminating Incoming and Outgoing cables with detachable Gland plates, complete terminal block arrangement with ferrule markings, Space Heater, Proper ventillation arrangements complete with powder coated finish and comprising of.,0.00.0Incoming : 100A, 4P MCCB with microprocessor based O/C relay, with On/OFF and Phase Indication lamps. 0.00.0Meterings: Digital Multi function meter with 3 Nos 100/5A,15VA, Cl:1 CT, Control wirings and control MCB's0.00.0Busbars : 100A, 3 Phase Aluminium Busbars with heat shrikable coloured sleeves. 0.00.0Outgoings :25 Nos, 20A, DP MCB with 3R, 2.5 Sq.mm Copper wires wired to the outgoing terminal blocks at cable ally. (Each 9/8 Nos MCB Outgoings has to be segregated in separate chamber for each phase: Refer SLD)0.00.0Note : A separate chamber for outgoing circuits to be provided with 16 Nos, 2 Way , 16A Modular switches as per enclosed SLD .Nos1197,000.00197,000.0011,500.0011,500.000.00.02.3Supply, Testing , Installation and commissioning of 36W x 2 Industrial type Flourscent lamp with Reflector and tubes. Make : Phillips, Cat No: TMC 055(2x36W) EBTNos221,895.0041,690.00175.003,850.000.00.02.4Supply and fixing of supporting materials for lighting fixtures such as clamps and hardwares.Lot14,000.004,000.002,000.002,000.000.00.02.5Supply, Fixing and connecting of 2 Way, 16A, Modular type switch with 1 Module Plate and 1 Module Zinc Chromate MS Box. Make : MK .Nos47325.0015,275.0075.003,525.000.00.02.6Supply and laying of 3Runs, 2.5 Sq.mm FRLS PVC Insulated copper Wires in raceways for lighting wiring.Mtrs506577.00390,005.0015.0075,975.002.7Tagging for WiresLot14,500.004,500.003,000.003,000.000.00.02.8Supply & Installation of 50 x 50 x 1.6mm (Thick) MS sheet steel fabricated, Powder coated Raceway for lighting wiring with detachable side cover provision.Mtrs300335.00100,500.0075.0022,500.002.9Supply and Installaiton of Fittings such as 'L' Bends , Tee's, and couplings for Raceway.Lot115,000.0015,000.005,000.005,000.002.10Supply and Fixing of raceway supporting Material such as clamps, Threaded drop rods and Angular supports etc.,Lot125,000.0025,000.007,500.007,500.000.00.03POWER SOCKET SYSTEM :0.00.03.1Supply and Installation of Power Socket outlet of 240V 2P+E 6A/16A 1 Gang with 1M odule Switch,2Module Socket, 4Module Plate and Zinc Chromate MS Box.Nos27504.0013,608.0075.002,025.003.2Supplyand Installation of 3 Phase Power Socket outlet 63A, 415V 3P+E Plug and socket with 63A, TP MCB in metal clad enclosure.Nos29,425.0018,850.00950.001,900.000.00.03.3Supply, Laying and Terminating of 3R, 4 Sq.mm FRLS PVC Insulated Copper flexible cable for Power socket outlets with suitable copper thimbles.Mtrs985111.00109,335.0015.0014,775.003.4Supply and fixing of Tagging materials for WiresLot12,000.002,000.002,000.002,000.000.00.03.5Supply, Laying, testing and Commissioning of the following 1.1kV Grade XLPE insulated, PVC sheathed , armoured cable in existing cable trays and clamping.0.00.0a) 4c x 16 Sq.mm Cu XLPE Ar PVC cable) Mtrs115633.0072,795.0050.005,750.00b) Supply and fixing of cable identification tags at both Panel and at load ends of the cable.Lot11,580.001,580.00500.00500.00c) Supply and Installation of supporting Material for LT Cables over Cable tray / from the roof level angular supports.Lot13,500.003,500.002,000.002,000.000.00.03.6Supply and making terminations for the following 1.1kV Grade XLPE Insulated PVC sheathed cables using Double Compression cable glands, Copper Lugs, fastening with G.I hardwares with proper colour coded insulating sleeves at cable ends. 0.00.0a) 4c x 16 Sq.mm Cu XLPE Ar PVC cableSets4350.001,400.00100.00400.000.00.03.7Supply and Laying of 25mm Dia, 1.6mm Thick G.I conduit pipe for 240V Power socket wiring with accessories such as Bends, Junction boxes, Couplings and saddles etc.,Mtrs895195.00174,525.0030.0026,850.003.8Supply and Laying of 40mm Dia, 2.0mm Thick G.I conduit pipe for 415V Power socket wiring with accessories such as Bends, Junction boxes, Couplings and saddles etc.,Mtrs8470.003,760.0050.00400.000.00.0IIIPHASE - III : REMOVING WORKS at N2, S2 AREA:0.00.00.00.01POWER DISTRIBUTION FOR MACHINES :0.00.01.1Removing of the existing Bus Trunking system for machines and its supports mounted from roof level.0.00.0a) 63A, 4P, BT No: 02, Fed from PP-12AMtrs480.0150.007,200.00b) 63A, 4P, BT No: 01, Fed from PP-12Mtrs120.0150.001,800.00c) 63A, 4P, BT No: 56, Fed from PP-12Mtrs210.0150.003,150.00d) 63A, 4P, BT No: 57, Fed from PP-12Mtrs120.0150.001,800.00e) 63A, 4P, BT No: 58, Fed from PP-12Mtrs210.0150.003,150.00f) 63A, 4P, BT No: 60, Fed from PP-12Mtrs0.50.0150.0075.00g) 63A, 4P, BT No: 61, Fed from PP-12Mtrs210.0150.003,150.00h) 63A, 4P, BT No: 62, Fed from PP-12Mtrs210.0150.003,150.00i) 63A, 4P, BT No: 63, Fed from PP-12Mtrs120.0150.001,800.00j) 63A, 4P, BT No: 64, Fed from PP-12Mtrs210.0150.003,150.00k) 63A, 4P, BT No: 65, Fed from PP-12Mtrs120.0150.001,800.00l) 63A, 4P, BT No: 31, Fed from PP-11Mtrs180.0150.002,700.00m) 63A, 4P, BT No: 32, Fed from PP-11Mtrs150.0150.002,250.00n) 63A, 4P, BT No: 33, Fed from PP-11Mtrs60.0150.00900.00o) 63A, 4P, BT No: 34, Fed from PP-11Mtrs180.0150.002,700.00p) 63A, 4P, BT No: 35, Fed from PP-11Mtrs150.0150.002,250.00q) 63A, 4P, BT No: 36, Fed from PP-11Mtrs60.0150.00900.00r) 63A, 4P, BT No: 49, Fed from PP-11AMtrs90.0150.001,350.00s) 63A, 4P, BT No: 50, Fed from PP-11AMtrs300.0150.004,500.00t) 63A, 4P, BT No: 51, Fed from PP-11AMtrs90.0150.001,350.00u) 63A, 4P, BT No: 52, Fed from PP-11AMtrs90.0150.001,350.00v) 63A, 4P, BT No: 53, Fed from PP-11AMtrs300.0150.004,500.00w) 63A, 4P, BT No: 54, Fed from PP-11AMtrs300.0150.004,500.00x) 63A, 4P, BT No: 30&34, Fed from PP-10Mtrs300.0150.004,500.004270.00.01.2Removing of the existing 4c x 16 Sq.mm Al Ar cable feeding the bus trunking from cable tray / supporting from roof.Mtrs10320.050.0051,600.000.00.01.3Removing the terminations of 4c x 16 Sq.mm Aluminium ar cable at panel and at Bus Trunking end.Nos500.0100.005,000.000.00.02LIGHTING SYSTEM :0.00.02.1Removing of the 50mm x 50 mm x 2400mm (Length) MS sheet steel Powder coated Race way covers for removing the lighting wirings laid in the raceways and storing them in a safe work place.Mtrs9520.075.0071,400.000.00.02.2Removing of the 3 runs of 2.5 Sq.mm Copper flexible wires in Race ways for lighting circuits, removing the terminations in the fittings and storing.Mtrs21760.015.0032,640.000.00.02.3Removing the Flourscent tube, Reflector and the cover of the light fixtures for disconnecting the circuit wires and storing them in a safe working place.Nos3360.0125.0042,000.000.00.0IVPHASE - III : SUPPLY & INSTALL WORKS at PF ASSY AREA.0.00.00.00.01POWER for MACHINE :0.00.01.1Supply and Installation of Feeder Box for LV Busbar Trunking system (Make: M/s EAE Cat no.KAP0605BB) Nos353,100.00108,500.00650.0022,750.000.00.01.2Supply, Installation, Testing and Commissioning of LV Busbar Trunking system ( Make: M/s EAE, Cat no.KAP0604) Nos1818,715.001,577,415.00600.00108,600.000.00.01.3Supply and Installation of End Box for LV Busbar trunking system (Make: M/s EAE, Cat no.KAP0605BS)Nos353,100.00108,500.00300.0010,500.000.00.01.4Supply, Installation of Tap Off Plug for the LV Busbar Trunking system (Make: M/s EAE Cat no.KAP16-KL123)Nos2351,500.00352,500.00150.0035,250.000.00.01.5Supply and installation of suitable supporting Material with drop rod arrangement from roofing supports for the LV Busbar trunking system (The distance between supports should be maintained within 1500mm)Lot1185,000.00185,000.0020,000.0020,000.000.00.01.6Supply and Laying of 10 Sq.mm Copper flexible cable for earthing from cable tray to the Busbar Trunking system along with the respective power cable. Mtrs183592.00168,820.0020.0036,700.001.7Supply and tagging of cable tie for WiresLot13,500.003,500.002,500.002,500.000.00.01.8Supply, Laying, testing and Commissioning of the following 1.1kV Grade XLPE insulated, PVC sheathed , armoured cable in existing cable trays and clamping.0.00.0a) 4c x 16 Sq.mm Cu XLPE Ar PVC cableMtrs1870633.001,183,710.0050.0093,500.000.00.0b) Supply and fixing of cable identification tags at both Panel and at load ends of the cable.Lot13,500.003,500.002,000.002,000.000.00.0c) Supply and Installation of supporting Material for LT Cables over Cable tray / from the roof level angular supports.Lot14,000.004,000.003,500.003,500.000.00.01.9Supply and making terminations for the following 1.1kV Grade XLPE Insulated PVC sheathed cables using Double Compression cable glands, Copper Lugs, fastening with G.I hardwares with proper colour coded insulating sleeves at cable ends. 0.00.0a) 4c x 16 Sq.mm Cu XLPE Ar PVC cableSets38350.0013,300.00100.003,800.000.00.01.10Supply and Installation of the following Hot dip Galvanized Perforated type cable tray including fittings such as coupling plates, Pre fabricated bends, Tee's , Reducers and Angular offset sections etc.,0.00.0a) 150mm x 50mm x 2.0mm (Thick) cable TrayMtrs95538.0051,110.00125.0011,875.00b) 200mm x 50mm x 2.0mm (Thick) Cable TrayMtrs25645.0016,125.00125.003,125.00c) Supporting Material for Cable tray from exisitng roof level angles using G I threaded rods / angle frames, clamping arrangements etc.,Lot117,000.0017,000.003,000.003,000.000.00.02LIGHTING SYSTEM :0.00.02.1Supply, Testing , Installation and commissioning of 36W x 2 Industrial type Flourscent lamp with Reflector and tubes. Make : Phillips, Cat No: TMC 055(2x36W) EBTNos201,895.0037,900.00175.003,500.000.00.02.2Supply and fixing of supporting materials for lighting fixtures such as clamps and hardwares.Lot13,500.003,500.002,000.002,000.000.00.02.3Supply, Fixing and connecting of 2 Way, 16A, Modular type switch with 1 Module Plate and 1 Module Zinc Chromate MS Box. Make : MK .Nos60325.0019,500.0075.004,500.000.00.02.4Supply and laying of 3Runs, 2.5 Sq.mm FRLS PVC Insulated copper Wires in raceways for lighting wiring.Mtrs986077.00759,220.0015.00147,900.002.5Tagging for WiresLot15,000.005,000.003,500.003,500.000.00.02.6Supply & Installation of 50 x 50 x 1.6mm (Thick) MS sheet steel fabricated, Powder coated Raceway for lighting wiring with detachable side cover provision.Mtrs115335.0038,525.0075.008,625.000.00.02.7Supply and Installaiton of Fittings such as 'L' Bends , Tee's, and couplings for Raceway.Lot110,000.0010,000.004,000.004,000.000.00.02.8Supply and Fixing of raceway supporting Material such as clamps, Threaded drop rods and Angular supports etc.,Lot120,000.0020,000.006,500.006,500.000.00.0VPHASE - III : REMOVING WORKS at N1, S1 AREA:0.00.00.00.01POWER DISTRIBUTION FOR MACHINES :0.00.01.1Removing of the existing Bus Trunking system for machines and its supports mounted from roof level.0.00.0a) 63A, 4P, BT No: 03, Fed from PP-9AMtrs150.0150.002,250.00b) 63A, 4P, BT No: 04, Fed from PP-9AMtrs120.0150.001,800.00c) 63A, 4P, BT No: 5, Fed from PP-9AMtrs120.0150.001,800.00d) 63A, 4P, BT No: 6, Fed from PP-9AMtrs150.0150.002,250.00e) 63A, 4P, BT No: 7, Fed from PP-10Mtrs180.0150.002,700.00f) 63A, 4P, BT No: 17, Fed from PP-10AMtrs10.0150.00150.00g) 63A, 4P, BT No: 15, Fed from PP-9AMtrs120.0150.001,800.00h) 63A, 4P, BT No: 16, Fed from PP-9AMtrs120.0150.001,800.00i) 63A, 4P, BT No: 13, Fed from PP-9AMtrs150.0150.002,250.00j) 63A, 4P, BT No: 14, Fed from PP-9AMtrs150.0150.002,250.00k) 63A, 4P, BT No: 12, Fed from PP-9Mtrs90.0150.001,350.00l) 63A, 4P, BT No: 37, Fed from PP-9AMtrs90.0150.001,350.00m) 63A, 4P, BT No: 18, Fed from PP-10AMtrs360.0150.005,400.00n) 63A, 4P, BT No: 38, Fed from PP-9AMtrs180.0150.002,700.00o) 63A, 4P, BT No: 19, Fed from PP-10AMtrs300.0150.004,500.00p) 63A, 4P, BT No: 01, Fed from PP-9Mtrs180.0150.002,700.00q) 63A, 4P, BT No: 02, Fed from PP-9Mtrs120.0150.001,800.00r) 63A, 4P, BT No: 08, Fed from PP-9Mtrs150.0150.002,250.00s) 63A, 4P, BT No: 09, Fed from PP-9Mtrs150.0150.002,250.00t) 63A, 4P, BT No: 10, Fed from PP-9Mtrs150.0150.002,250.00u) 63A, 4P, BT No: 11, Fed from PP-9Mtrs90.0150.001,350.00v) 63A, 4P, BT No: 40, Fed from PP-9Mtrs180.0150.002,700.00w) 63A, 4P, BT No: 16, Fed from PP-10Mtrs150.0150.002,250.00x) 63A, 4P, BT No: 29, Fed from PP-9Mtrs150.0150.002,250.00y) 63A, 4P, BT No: 37, Fed from PP-11Mtrs180.0150.002,700.00z) 63A, 4P, BT No: 25, Fed from PP-10Mtrs180.0150.002,700.00aa) 63A, 4P, BT No: 21, Fed from PP-10Mtrs180.0150.002,700.00ab) 63A, 4P, BT No: 22, Fed from PP-10Mtrs120.0150.001,800.00ac) 63A, 4P, BT No: 23, Fed from PP-10Mtrs180.0150.002,700.00ad) 63A, 4P, BT No: 24, Fed from PP-10Mtrs180.0150.002,700.00ae) 63A, 4P, BT No: 27, Fed from PP-10Mtrs60.0150.00900.00af) 63A, 4P, BT No: 28, Fed from PP-10Mtrs90.0150.001,350.004860.00.00.00.01.2Removing of the existing 4c x 16 Sq.mm Al Ar cable feeding the bus trunking from cable tray / supporting from roof.Mtrs16750.050.0083,750.000.00.01.3Removing the terminations of 4c x 16 Sq.mm Aluminium ar cable at panel and at Bus Trunking end.Nos640.0100.006,400.000.00.02LIGHTING SYSTEM :0.00.02.1Removing of the 50mm x 50 mm x 2400mm (Length) MS sheet steel Powder coated Race way covers for removing the lighting wirings laid in the raceways and storing them in a safe work place.Mtrs19400.075.00145,500.000.00.02.2Removing of the 3 runs of 2.5 Sq.mm Copper flexible wires in Race ways for lighting circuits, removing the terminations in the fittings and storing.Mtrs42900.015.0064,350.000.00.02.3Removing the Flourscent tube, Reflector and the cover of the light fixtures for disconnecting the circuit wires and storing them in a safe working place.Nos5880.0125.0073,500.000.00.0VIPHASE - III : SUPPLY & INSTALLATION WORKS at PF CHAIN AREA.0.00.00.00.01POWER for MACHINE :0.00.01.1Supply and Installation of Feeder Box for LV Busbar Trunking system (Make: M/s EAE Cat no.KAP0605BB) Nos243,100.0074,400.00650.0015,600.000.00.01.2Supply, Installation, Testing and Commissioning of LV Busbar Trunking system ( Make: M/s EAE, Cat no.KAP0604) Nos1078,715.00932,505.00600.0064,200.000.00.01.3Supply and Installation of End Box for LV Busbar trunking system (Make: M/s EAE, Cat no.KAP0605BS)Nos243,100.0074,400.00300.007,200.000.00.01.4Supply, Installation of Tap Off Plug for the LV Busbar Trunking system (Make: M/s EAE Cat no.KAP16-KL123)Nos1361,500.00204,000.00150.0020,400.000.00.01.5Supply and installation of suitable supporting Material with drop rod arrangement from roofing supports for the LV Busbar trunking system (The distance between supports should be maintained within 1500mm)Lot1115,000.00115,000.0012,500.0012,500.000.00.01.6Supply and Laying of 10 Sq.mm Copper flexible cable for earthing from cable tray to the Busbar Trunking system along with the respective power cable. Mtrs114592.00105,340.0020.0022,900.001.7Supply and tagging of cable tie for WiresLot13,500.003,500.002,500.002,500.000.00.01.8Supply, Laying, testing and Commissioning of the following 1.1kV Grade XLPE insulated, PVC sheathed , armoured cable in existing cable trays and clamping.0.00.0a) 4c x 16 Sq.mm Cu XLPE Ar PVC cableMtrs1165633.00737,445.0050.0058,250.00b) Supply and fixing of cable identification tags at both Panel and at load ends of the cable.Lot13,500.003,500.002,000.002,000.00c) Supply and Installation of supporting Material for LT Cables over Cable tray / from the roof level angular supports.Lot14,000.004,000.003,500.003,500.000.00.01.9Supply and making terminations for the following 1.1kV Grade XLPE Insulated PVC sheathed cables using Double Compression cable glands, Copper Lugs, fastening with G.I hardwares with proper colour coded insulating sleeves at cable ends. 0.00.0a) 4c x 16 Sq.mm Cu XLPE Ar PVC cableSets24350.008,400.00100.002,400.000.00.01.10Supply and Installation of the following Hot dip Galvanized Perforated type cable tray including fittings such as coupling plates, Pre fabricated bends, Tee's , Reducers and Angular offset sections etc.,0.00.0a) 150mm x 50mm x 2.0mm (Thick) cable TrayMtrs45538.0024,210.00125.005,625.00b) Supporting Material for Cable tray from exisitng roof level angles using G I threaded rods / angle frames, clamping arrangements etc.,Lot110,000.0010,000.005,000.005,000.000.00.02LIGHTING SYSTEM :0.00.02.1Supply, Fixing and connecting of 2 Way, 16A, Modular type switch with 1 Module Plate and 1 Module Zinc Chromate MS Box. Make : MK .Nos60325.0019,500.0075.004,500.000.00.02.2Supply and laying of 3 Runs, 2.5 Sq.mm FRLS PVC Insulated copper Wires in raceways for lighting wiring.Mtrs996577.00767,305.0015.00149,475.002.3Tagging for WiresLot15,000.005,000.003,500.003,500.000.00.02.4Supply & Installation of 50 x 50 x 1.6mm (Thick) MS sheet steel fabricated, Powder coated Raceway for lighting wiring with detachable side cover provision.Mtrs110335.0036,850.0075.008,250.000.00.02.5Supply and Installation of Fittings such as 'L' Bends , Tee's, and couplings for Raceway.Lot110,000.0010,000.004,000.004,000.000.00.02.6Supply and Fixing of raceway supporting Material such as clamps, Threaded drop rods and Angular supports etc.,Lot115,000.0015,000.005,000.005,000.000.00.03.0MISCELLANEOUS :0.00.00.00.03.1Charges for providing scaffolding / Ladder for removing and Installation works.Lot10.00.0150,000.00150,000.00

Total:13,756,528.002,781,590.00(Materials prices must be follow as per terms & conditons)ADD SERVICE TAX ON INSTALLATION@12.36%343,804.52Grand Total13,756,528.003,125,394.52TOTAL(SUPPLY+INSTALLATION)16,881,922.5216,375,464.85

&P - &N

Sheet2

Sheet3