Y2011 Wired Intrusion Alarm...

Wired Intrusion AlarmY2011Catalog

n Smoke/GAS/CO/Heat Detector p12-p14

n Vibration sensor and analyzer p15-p16

n Glass Break Detector p17

n Water Detector p18

n Manual Call Point p19

n Photoelectric Beam Detector p20

n Outdoor Siren p21-p23

n Strobe/Piezo Siren p24-p25

n Strobe Light p26

n Magnetic Switches p27-p31

n Panic Button & others p32

n Intrusion alarm panel p3

n PIR and MW Detector p4-p9

FEATURES

SPECIFICATIONS

Intrusion Alarm Panel

n IM-2008/2016

IM-2008/2016

* Wired Control Panel for 8/16 programmable Zones* Led keypad* Automatically dials alarm center user’s mobile phone or telephone with audible alarm while emergency happens* Settable 6 groups of phone number and 2 groups alarm center phone * Connect 4 keypads at most * 8/16 wired programmable zones* Different programmable settings* Single zone ARM and DISARM* Connect 4 keypads at most* compatible ADEMCO4+1, CID communication protocol* Record 100 latest alarm events* Built-in voice module, 10seconds record, voice alarm function* 1 PGM output

159mm×138mm×33mmKeyboard Dimension

274mm×264mm×86mmSize (L*W*H)

-10ºC to 55ºCOperating Temperature

40～70％Operating Humidity

DC12V~15VOutput Voltage

14V 800mAAlarm Output

<1.5WPower

≤ 50mAStatic Current

110 or 220VAC±10％Power Supply

168Wired zones

IM-2016IM-2008Item

FEATURES

SPECIFICATIONS

PIR Detector

* Microprocessor Design* Real Temperature Compensation* Anti white Light* Low Power Consumption* High RFI Immunity to Reduce False Alarm (22V/m at 10Mhz to 1GHz）* Professional Optical Lenses* Resist Fluorescent Interference * Form-C Relay * Smart and Elegant Design is Ideal Selection for Residential Installations* Detect range: 10 meters

* 20Kg Pet immunity model PT-210 is optional

n PR-210/PT-210

PR-210/PT-210

PR-210 NO/PT-210 20KGPet immunity

89 x 52 x 39mmSize (L*W*H)


22V/m at 10Mhz to 1GhzRFI characteristic

2 minutesTime to Warm-up

2.2sResponse time to Alarm

110°Detecting Angle

10m (under 26℃ in indoor room)Detecting Distance

2.4mInstallation Height

NC, 12VDC, 100mA maxContacts of Alarm

12mA at 12VDCRated Current

9-16VDCOperated Voltage

12VDCRated Voltage

PR-210/PT-210Item

FEATURES

SPECIFICATIONS

PIR Detector

* Microprocessor Design* Real Temperature Compensation* Anti white Light* Low Power Consumption* High RFI Immunity to Reduce False Alarm (22V/m at 10Mhz to 1GHz）* Professional Optical Lenses* Resist Fluorescent Interference * Form-C Relay * Smart and Elegant Design is Ideal Selection for Residential Installations* Detect range: 12 meters

* 33Kg pet immunity model PT-410 is optional

n PR-410/PT-410

PR-410/PT-410

PR-410 NO/PT-410 33KgPet immunity












12VDCRated Voltage

PR-410/PT-410Item

FEATURES

SPECIFICATIONS

PIR Detector

* MCU processing* Anti-Tamper Shield* Anti-white Light Function* Auto temperature compensation, reducing false alarm* LED ON/OFF optional* Alarm delay optional* Adopted SMT, high EMI/RFI immunity

n PR-601

PR-601

* Input Voltage: DC 9～16V* Operating Current: ≤20mA (DC 12V )* Operating Temperature:-10℃～+50℃* Installation Method: Wall mounted* Installation Height: 2.2m is recommended* Detecting distance: 12 meter* Detecting Angle: 110°* Alarm Output: Normal Close* Anti Tamper Switch: Normal Close* Dimension: 89*52.5*38.5mm

FEATURES

SPECIFICATIONS

n PR-604

PIR Detector

* Ceiling Mounted* Anti- burn ABS Shield* Auto temperature compensation, reducing false alarm* Adopted SMT, high EMI/RFI immunity* Pulse Count optional for different environment installation * Dynamic Valve Adjustment Technology for Anti-interferences* Alarm output NC/NO optional for different controllers

PR-604

* Input Voltage: DC 9～16V* Operating Current: ≤18mA (DC 12V )* Operating Temperature:-10℃～+50℃* Installation Method: Ceiling mounted* Installation Height: 2.5m ~6m is recommended* Detecting distance: 6 diameter (at 3.6m installation height)* Detecting Angle: 360°* Alarm Output: NO. NC optional * Anti Tamper Switch: Normal Close

FEATURES

SPECIFICATIONS

PIR+MW Detector

n PD-110

PD-110

* Dual PIR and MW technology* Microprocessor Design* Temperature compensation* Microwave range is adjustable* Dual polarity pulse count adjustable* Top view window and creep zone* High PRI Immunity for false alarm prevention(30V/m-1GHz)* Bracket is available* Memory and Form-C relay* Detect range 10m(PD-110), 11M( PT-111),15m(PD-115), 25m(PD-125) are optional












NoNoNoAnti-mask

No40kgNoPet immunity

15m11m10mDetect range

12VDCRated Voltage

PD-115PT-111PD-110Item Models

FEATURES

SPECIFICATIONS

* Ceiling mounting, tope view 110°, 360° full orientation* Dual IR and MW technology* Microwave range is adjustable* High resist interference of white light* Power consumption is low* High RFI Immunity for false alarm prevention* Professional optical pigmented lenses* Pulse count is selectable

n DT-150

DT-150

-20ºC to 60ºCStorage Temperature

¢130 x 21mmSize (L*W*H)

0ºC to 50ºCOperating Temperature



2.2sTime to Alarm

NC, 12VDC, 100mA maxContacts of Tamper


25mAOperated Current


DT-150Item

PIR+MW Detector

FEATURES

SPECIFICATIONS

Smoke Detector

SD-98-4

* Dual LEDs for 360-degree visibility* Stainless steel inner housing for high ANTI-RFI* Two or four wire models optional* Sleek, low-profile housing design* Low power consumption, high precision and stability* Durable Sensor Head; Excellent smoke access* Auto-reset default for 4 wire connection or power-off reset optional* Easy Installation and maintenance

104mm(Dia)x51mm(H)Dimensions

≦95%RHOperating Humidity

-10°C ~ +55°COperating Temperature

Ceiling MountedInstallation Method

Relay output (N.O/N.C) and LED flashAlarm Output

80 square meter(with the installation height of 6m-12m), and 60 square meter (with the installation height less than 6m)Detecting Area

≦12mAAlarm Current

≦10mAStandby Current

DC12VOperating Voltage

SD-98-4 wireModels

FEATURES

SPECIFICATIONS

Gas Detector

GD-87

* Adopted SMT* MCU processing* Highlight dual color LED indication* Low power consumption * 2 in 1 Button: Test & Auto-reset* Ceiling Mounted* Unique bracket design, easy installation* Relay out (N.O/N.C)* High adaptability to the ambient, with dustproof, mothproof, moisture proof and high EMI immunity

function


¢115 x 51mmDimensions

-10°C ~ +55°COperating Temperature

≤60sElectrify time

Auto-reset (Power off reset≤0.5s optional)Alarm Reset

Flash & sound alarm / Network Alarm Signal Alarm Mode

Relay output(NC/NO) and Sound & flash alarmAlarm Output

≥75dB/mSounder Level

80-120mA (At DC 12V)Alarm Current

≤60mA (At DC 12V)Standby Current

DC 9-16V Operating Voltage

Natural Gas / LPGInduced Gas

GD-87Model

FEATURES

SPECIFICATIONS

Gas Detector

GD-86

* Hot wire type sensor* Easy installation and maintenance * Modernized design* Detect all sorts of combustible gases, LPG and LNG include city gas * Ideal for all kitchens * Excellent reliability & high stability * Self test function * Durable sensor head * Less affected by other organic solvent * High Accuracy * Relay out N.O/N.C* Connected with Valve (12VDC Output) model GD-86V optional * Suitable for safety valve

GD-86 Relay out(NC/NO),GD-86V 12V e-valvaAlarm Output

-10℃ to 50℃Working Temperature

85dB at 3 metersSound Level

≤95%Working Humidity

Red LED flashes with acoustic alarmAlarm Mode

Green LED on/Yellow LED onStandby Mode/Faulty Indicator

10%LELSensitivity

≤1.7WPower Consumption

90-240V AC or 110V/220VACPower Source

LPG (Butane, Propane); Natural gas (Methane)Type of Gas sensed

GD-86Model

FEATURES

SPECIFICATIONSCO-90

* Carbon Monoxide Detector* Wall mounted* Independent & Network Optional* 12VDC/220VAC optional* NO/NC relay out* Electronic valve connection

N.C/N.O,electronic valveAlarm output

<=5w (AC supply)Power consumption

Sound&flash alarm,electronmagnetic switch,networkAlarm mode

-10°C ~ +55°C,Humidity <=95%RHOperating environment

+-5LELAlarm error

115*72*40mmDimension

>=85db(1m)Buzzer Level

15%LEL/150PPM(CO)Alarm density

<=100mA (DC supply)Alarm Current

<=50mA (DC supply)Static Current

DC 12V/AC 220V 50HzWorking Voltage

Natural GAS/LPG/COIncluded GAS

CO-90Model

Carbon Monoxide Detector

FEATURES

SPECIFICATIONS

Heat Detector

HD-94

* Non Polar 4-wire connection, Relay output * Modern stylish design * Low Power consumption * Power-off reset function* Easy Installation and maintenance * Extended warranty* Relay out N.O/N.C

100mm(Dia)*46mm(H)Dimensions


0°C ~ +80°COperating Temperature

Ceiling MountedInstallation Method

Relay output (N.O/N.C),Sound&Flash AlarmAlarm Output

≦60mA at DC 24VAlarm Current

≦200uA (DC 24V)Standby Current

DC10-32VVoltage Range

HD-94Model

FEATURES

SPECIFICATIONS

Vibration Detectorn VD-201* Strong detection ability, long-frequency

vibration and shock* Sensibility adjustable: high, medium, low* Pulse output time: 0.5mS-50Ms

10mA(Min)Operating current

20mA(Max)Operating current

60VDC(Max)Operating voltage

12VDCInput Voltage

VD-201Items Model

Vibration Analyzer

n VD-972* Sensitivity adjustable * Time interval adjustable * EOL monitoring of balance test circuit* Automatic reset/manual reset/ power-on reset adjustable * Trouble alarm function* Anti-tamper alarm function* Anti-thunder, anti-surge design* Maximum up connection 10 VD201 sensor

VD-972

135*70*50mmDimension

Test voltage 2 KVEFT/B test data

Test voltage 1 KVSurge test data

NCAnti-temper output

NCAlarm output

80~200msTime interval adjust

0.1~60ms inputVibration sensitivity

Vibration switch sensor, maximum 10 VD201 sensor in serialsSensor type and connection number

-10°C~50°C（14°F~122°F）Operating temperature

45mAOperating current

DC12V（voltage range：DC10-16V）Operating voltage

VD-972

FEATURES

Vibration Detector

VD-200

* Independent vibration detector* Photo electricity Vibratory Sensor* Sensitivity is Adjustable* Microprocessor Design Improves False Alarm Immunity* Power Consumption is Low* Mounting Fashion is Flexible* Tamper Immunity* Alarm Indication* Compliant to Any Environment* Compact and Elegant Shape

SPECIFICATIONS

* Operating voltage: 9-16 VDC* Current: 11mA at 12 VDC* Alarm contacts: 0.1 amps, 24 volts, NC * Tamper contacts: 0.1 amps, 24 volts, NC * Alarm time: 2.2s min* Warm time: <2 minutes* Operating temperature: -20 degree C to 50 degree C* Storage temperature: -20 degree C to 60 degree C* Mounting fashion: surface* Size: 85x26x25 mm

FEATURES

SPECIFICATIONS

Glass Break Detector

* MCU Processing* Unique Appearance Design* Dual LED Indication* Sensitivity High/Low Optional* Unique Test Mode* Unique Alarm Locking Mode* High Density SMT Design* High EMI/RFI immunity

N.C, Connection Point: 28VDC, 100mAAnti-Tamper Switcher

≤25mAAlarm Current

9-16V DCRated voltage

≤15mA (DC 12V) Operating Current:

N.C, Connection Point: 28VDC, 80mARelay Output

9 meter (High Sensitivity); 5 meter (Low Sensitivity)Detection distance

Flat-panel, steel, laminated and metal coating glassSuitable for glass

GD-210Items Model

n GD-210

SPECIFICATIONS

n WD-501

Water Detector

FEATURES

* ABS plastic house* Build-in buzzer alarm* Apply to detect the leakage of conductive liquid* Install the water detector on the wall near the floor* Easy installation* Ideal for water level detector

60x25x90mmDimension

8mMax additional remote sensor

NC/NO(1A 24VDC)Relay Output

35mmExternal probe max length

-10℃～+50℃Operating Temperature

20mAMax current

≤15 mA (DC 12V)Static Current

12VDCInput Voltage

WD-501Items Model

SPECIFICATIONS

n FS-10

Liquid Level Detector

FEATURES

* Ideal for water or liquid level with PH-/PH+* Material of Body: SUS304* Material of float: SUS316* Output: Normal open with 10W* Material of screw net & E-ring: SUS304* Proportion of float: 0.7kg/cm3* Max pressure: 10kg/cm2* Leads: 1430UL22AWG430mm length

FS-10

-40 – 150 degree COperating Temperature

∞ ohmInsulation Resistance (Min)

0.2ohmInitial Resistance (Max)

DC1.0ACarrying Current (Max)

0.5ASwitching Current (Max)

200VBreakdown Voltage (Min)

DC100VSwitching Voltage (Max)

10WSwitching Power

UpperContact Position

ParametersDescription

SPECIFICATIONS

n FS-11


FEATURES

* Ideal for water or liquid level with PH-/PH+* Material of Body: SUS304* Material of float: SUS316* Output: Normal open with 10W* Material of screw net & E-ring: SUS304* Proportion of float: 0.7kg/cm3* Max pressure: 10kg/cm2* Leads: 1430UL22AWG330mm length

FS-11

-40 – 150 degree COperating Temperature







10WSwitching Power



SPECIFICATIONS

n FS-12


FEATURES

* Ideal for water * Material of Body & screw net: PP+GF* Material of float & E-ring: PP* Output: Normal open with 10W* Proportion of float: 0.7kg/cm3* Max pressure: 10kg/cm2* Leads: 1430UL22AWG330mm length

FS-12

-10 – +60 degree COperating Temperature







10WSwitching Power



SPECIFICATIONS

n FS-13


FEATURES

* Ideal for water * Material of Body & screw net: SUS304* Material of float & E-ring : PP* Output: Normal open with 10W* Proportion of float: 0.7kg/cm3* Max pressure: 10kg/cm2* Leads: 1430UL22AWG430mm length

FS-13








10WSwitching Power



SPECIFICATIONS

n FS-14


FEATURES

FS-14








10WSwitching Power



* Ideal for water * Material of Body & screw net: PP+GF* Material of float & E-ring: PP* Material of screw net: ABS* Output: Normal open with 10W* Proportion of float: 0.7kg/cm3* Max pressure: 10kg/cm2* Leads: 1430UL22AWG430mm length

Call Point

FEATURES

SPECIFICATIONS

IM-922n IM-922 n IM-911

IM-911

n IM-922 n IM-911

* Flexible manual call point* Polyester enclosure---light, strong and not

subject to corrosion * Unique ”Plug & Play” installation concept * Simple Maintenance: only one tool is

needed for test and reset * Choice of Surface or Flush mount* Marking options available* Available color: red, green* Customization color: yellow, white, blue

* Operating voltage: 30VDC* Operating current: 2A* Withstood-voltage: 250V* Operating temperature: -10℃-50℃

•Break glass manual call point* Convenient testing with key* Choice of Surface or Flush mounting* Marking options available* Available in a variety of color: red, green* Customization color: yellow, white, blue

* Operating voltage: 12/24VDC* Operating current: 5A* Withstood-voltage: 250VAC* Operating status: NO NC (DPDT can be

customized)

FEATURES

SPECIFICATIONS

Beam Detector

IP65IP Rating

PC Resin(Black)Appearance

650g(Both transmitter and receiver)Weight

Wall or poleMounting

±10°vertical, ±90°horizontalAlignment angle

95%maxEnvironment humidity

-25℃ to +55℃Operating temperature

N.C. Opens when cover is removedTamper switch

Form C relay(AC/DC30V 0.5A max)Alarm output

2sec(±1)nominalAlarm period

65mA max65mA max55mA max40mA maxCurrent consumption

DC12~24V/AC11~18VPower input

50~700msec(selectable)Interruption period

Pulsed infrared dual beamsBeam Characteristics

300m240m180m90mIndoor

100m80m60m30mOutdoorRange

Infrared photoelectricDetection Method

ABT-100ABT-80ABT-60ABT-30Items Model

* Dual Photoelectric Detector, difference distance as option* Twin synchronized pulsed beams designed for greater stability* Design Durability* Frost and dew protection* High grade aspherical lens* Perfect beam blocking stability* Adjustable beam interruption period* Quick optical and voltage alignment to speed up positioning* A.G.C (Automatic Gain Control) Circuit

SPECIFICATIONS

n IM-302 n IM-301/301B* High resistant PC housing, UV prevention * Internal/External Tamper trigger selectable * Internal 7.2V rechargeable battery backup * SAB function available* Twin or single sounders selectable.* 4 kinds of sounder timer selectable.* Piercing siren sound with high-visibility xenon strobeflashes.

* Separated strobes providing both negative andpositive inputs

* Red and green LED indicate easy status confirmation* Lens: Blue, red colors selectable

* ABS Housing with UV resistance * Internal/External Tamper trigger selectable * SAB function available* Twin or single sounders are selectable* 4 kinds of sounder time selection* Piercing siren sound with high-visibility xenon strobeflashes

* Separated strobes providing both negative and positiveinputs

* Red and green LED indicate easy status confirmation* Lens: Blue, red colors selectable

1Kg

300x250x65mm

IP65

-25℃ to +70℃

5sec(test),3 min,20min,continuous

once per 1 sec

115dB for single sounder, 120dB for twin sounders

380mA at 13.5V DC 300mA at 13.5VDC

7.2V 500mA rechargeable

20mA at 12V DC

12-15V DC

PC Housing with UV resistance

IM 302

0.8Kg0.6KgWeight

210x130x78mmDimensions

IP Rating

Operating temperature

Timers

Flash rate

Siren output

Siren current

7.2V 500mA rechargeableNABackup battery

Current consumption standby

Operating voltage

ABS Housing with UV resistance Material

IM 301BIM 301Items ModelsOutdoor Siren

FEATURES

FEATURES

SPECIFICATIONS

n IM-304 n IM-303

Outdoor Siren

* Highly resistant ABS housing, UV prevention* Inside metal cover for double protection* Magnetic dynamic sounders with 120DB at 1M* Positive/negative siren trigger* Positive/negative flash trigger* Battery Backup* Len colors in red orange optional* 2 Way tamper switch protection

* Highly resistant ABS housing, UV prevention* Inside metal cover for double protection* Magnetic dynamic sounders with 120DB at 1M* Positive/negative siren trigger* Positive/negative flash trigger* Battery Backup* Len colors in red, orange optional* 3 Way tamper switch protection

1.85kg1.2kgWeight (Without Battery)

270X193X100mm280X170X97mmDimensions

IP65IP Rating

-30℃ to +60℃Operating Temperature Range

PC with UV ProtectionCase Protection Level

External Box-ABS(3mm thick), Internal Cover: Metal(0.8mm thick)Material

8VDC +/-0.3VDCLow Battery Level

Rechargeable Lead Acid Battery 12V up to 1.3AhBackup Battery

NC.28 VDC Maximum Current 0.1A, Open when cover is removedTamper Switch

F.T-Follow Trigger TMR-3minSiren Alarm Period

Trigger Low=Max. 1VDC, Trigger High=Min.9VDCTrigger Level

50W(Peak)Maximum Power

Standby-8mA, [email protected], [email protected] Consumption (Speaker and Strobe)

250mACharge Current Limit

13.8-14.2VDCPower supply Voltage

Lamp 12VDC/5WFlash Light

1300-2400Hz500-3000HzSiren Tone

1850HzFundamental Frequency

YelpSound Tone

120dBSound Pressure

IM 303IM 304Items Models

FEATURES

SPECIFICATIONS

n IM-306

Outdoor Siren

IM-306

*Dual tamper protection from upper cover removal or removal of the bell box. Optional protection of screw loose.*Equipped with internal 7.2V rechargeable battery, SAB mode is available. Optional VRLA battery room is provided.*Red and green status LED indications for easy status confirmation. The indications are as follows:

**Red and green LEDs flash alternately means system in standby mode.**Green LED off means no backup battery power supply, Red LED off means no main power supply.**Red and green LEDs flashing twice quickly means siren trigger.**When main power is cut or tamper, red and green LEDs flash quickly, LED and the LEDS will work simultaneous.

*Piercing siren sound with 12PCS super light LED . Trigger signals for sounders and strobe are separate and both negative and positive inputs are compatible.*4 kinds of sounder timer selections. The default selection is 3 minutes. 1 minute, 15 minutes, and continuous sound are selectable with dip switch. *External or Internal tamper trigger is selectable. Real outdoor tamper switch provided.

650gWeight:

260mm X 159mm X 75mmDimensions (L X W X H):

Blue, Red color are selectedLens:

PC with UV Resistant different housing colorsHousing:

-25°C to +70°COperating Temperature:

INT/EXT selectableTamper Trigger:

1 min, 3 min, 15 min, continuous Timers:

90 times per minute.Flash Rate:

110db Siren Output:

180mA at 12VdcFlash Current:

220mA at 12VdcSiren Current:

7.2V 500mA rechargeableBackup Battery:

20mA at 13.5VDCCurrent Consumption Standby:

13.5VDCOperating Voltage:

FEATURES

n IM-103

Strobe Siren

* Material: ABS Housing, acrylic lens* Working Current: 280 mA at 12VDC* Tone Nature: Warble* Flash rate: 90 flashes/minute* SPL DB/1m: 112±3* Lens color: red* (A) type: strobe and siren (standard)* (B) type: siren only* (C) type: strobe only* Size (mm): 122.2L * 72.8W * 43H

* ABS Housing In Red * Operating Range:6-15 VDC * Rated current: 200mA* Rated Voltage:12 VDC* SPL DB/1m:112±3 * Size (mm): 122L * 72W * 36H

n IM-102

Piezo Siren

FEATURES

* ABS Housing in Black or White * Operating Range: 6-15 VDC* Rated current:: 180 mA* Rated Voltage: 12 VDC* SPL DB/1m: 105±3 * Size (mm): 60L * 45W * 40H

n IM-101

* ABS Housing in Black or White* Rated Voltage: 12 (VDC) * Operating Range: 6-15(VDC)* Current(mA):200mA* SPL(dB/1m): 110±3* Tone: One tone or Six tone* Rated power:20W* Size:53Φ*47mm

n IM-104

* ABS Housing In White * Current(mA): 400* Voltage(VDC): 12* Operating range(VDC): 6-15* SPL(dB/1m): 104±2* Tone: Dual tone* Rated power:15W* Size:110*110*55.4mm

n IM-105

FEATURES

n IM-111

ABS Housing white* Rated Voltage:12 (VDC) * Operating Range:6-15(VDC)* 15W siren, dual tone

* ABS Housing In White* Rated Voltage:12 (VDC) * Operating Range:6-15(VDC)* 30W siren* dual tone, 1200MA

n IM-112

Piezo Siren

Piezo Siren

IM-111

IM-112

FEATURES

n IM-80

Strobe Light

* ABS base, acrylic lens* Rated voltage: 12VDC* Working Current: 200 mA at 12VDC, 120 mA at 24VDC

* Flash rate: 65 flashes/minute* Working time: more than 200 hours (standard power work continuously)

* Installation type : two screws •Strobe colour: red or blue available* U-type tube* 100Ø x 75H mm

n IM-79

n IM-79LED

* ABS base, acrylic lens* Rated voltage: 12VDC* Working Current: 200 mA at 12VDC, 120 mA at 24VDC

* Flash rate: 65 flashes/minute* Working time: more than 200 hours (standard power work continuously)

* Installation type : two screws* Neon tube* 70 Ø x 36.5 (without mount base)

* ABS base, acrylic lens* Rated voltage: 12VDC* Working Current: 50 mA at 12VDC,

30 mA at 24VDC * Flash rate: 120 flashes/minute* Working time: more than 1000 hours* Installation type : two screws* Life time: ≥1000 hours (standard

power work continuously)* LED light* 70 Ø x 36.5 mm (without mount base)

Strobe Light

FEATURES

FEATURES

n IM-120

Magnetic Switches

* 3/8 inch diameter press fit contact* 17 inch (43cm) side leads with AWG #22* Magnet: NdFeB* Color: white, brown, grey* Loop Type: closed * Reed Form: NO * Operating Gap Inch(mm): 3/4 (20±5) * Max Contact Resistance Ohm: 0.2 * Max Rating Current mA: 500 * Max Switching Voltage VDC: 100* Size: 10DIA * 32L mm

n IM-121* 3/8 inch diameter flanged recessed switch* Press fit contact * 17 inch (43cm) side leads with AWG #22* Magnet: NdFeB* Color: white, brown, grey* Loop Type: closed * Reed Form: NO * Operating Gap Inch(mm): 3/4 (20±5) * Max Contact Resistance Ohm: 0.2 * Max Rating Current mA: 500 * Max Switching Voltage VDC: 10* Size: 19DIA * 32L mm

n IM-122* 1/4 inch diameter straight cylindrical superminiature recessed switch

* Press fit contact * 14 inch (35cm) side leads with AWG #24* Magnet: NdFeB* Color: white, brown, grey* Loop Type: closed * Reed Form: NO * Operating Gap Inch(mm): 3/4 (20±5) * Max Contact Resistance Ohm: 0.2 * Max Rating Current mA: 500 * Max Switching Voltage VDC: 100* Size: 6DIA * 14L mm

n IM-123

* 1/4 inch diameter straight cylindrical super miniature recessed switch

* Press fit contact * 17 inch (43cm) side leads with AWG #22* Magnet: NdFeB* Color: white, brown, grey* Loop Type: closed * Reed Form: NO * Operating Gap Inch(mm): 3/4 (20±5) * Max Contact Resistance Ohm: 0.2 * Max Rating Current mA: 500 * Max Switching Voltage VDC:100* Size: 7DIA * 27L mm

Magnetic Switches

FEATURES

n IM-124* 3/8 inch diameter miniature flush mounted* Nickel plated magnet* 17 inch (43cm) side leads with AWG #22* Magnet: NdFeB* Color: white, brown, grey* Loop Type: closed * Reed Form: NO * Operating Gap Inch(mm): 3/4 (20±5) * Max Contact Resistance Ohm: 0.2 * Max Rating Current mA: 500 * Max Switching Voltage VDC: 100* Size: 6DIA * 14L mm

n IM-125* Mini stick-on contact with flange* Self-adhesive and screw mount* 12 inch (30cm) center leads with AWG #24 * Magnet: NdFeB* Color: white, brown, grey* Loop Type: closed * Reed Form : NO * Operating Gap Inch(mm): 3/4 (20±5) * Max Contact Resistance Ohm: 0.2 * Max Rating Current mA: 500 * Max Switching Voltage VDC: 100* Size: 27L * 14W * 8H mm

FEATURES

n IM-126

Magnetic Switches

n IM-127

n IM-128

n IM-129

Magnetic Switches

FEATURES

* Mini stick-on contact with flange* Self-adhesive and screw mount* 16 inch (40cm) side leads with AWG #22* Magnet: NdFeB* Color: white, brown, grey* Loop Type: closed * Reed Form: NO * Operating Gap Inch(mm): 3/4 (20±5) * Max Contact Resistance Ohm: 0.2 * Max Rating Current mA: 500 * Max Switching Voltage VDC: 100* Size: 27L * 14W * 8H mm

* Screw mount* 16 inch (40cm) side leads with AWG #22* Magnet: Permanent Ferrite* Color: white, brown, grey* Loop Type: closed * Reed Form: NO * Operating Gap Inch(mm): 3/4 (20±5) * Max Contact Resistance Ohm: 0.2 * Max Rating Current mA: 500 * Max Switching Voltage VDC: 100* Size: 64L * 12.8W * 12.8H

* Self-adhesive and screw mount * Magnet: NdFeB* Color: white, brown, grey* Loop Type: closed * Reed Form: NO * Operating Gap Inch(mm): 3/4 (20±5) * Max Contact Resistance Ohm: 0.2 * Max Rating Current mA: 500 * Max Switching Voltage VDC: 100* Size: 44L * 10W * 7H mm

* Mini stick-on contact with flange* Self-adhesive and screw mount* 16inch (40cm) side leads with AWG #22* Magnet: NdFeB* Color: white, brown, grey* Loop Type: closed * Reed Form: NO * Operating Gap Inch(mm): 3/4 (20±5) * Max Contact Resistance Ohm: 0.2 * Max Rating Current mA: 500 * Max Switching Voltage VDC: 100* Size: 34L * 13.5W * 8H mm

IM-128

n IM-130* 3/4 inch diameter press fit contact* Suitable for steel door install* Self-locking housing* 12 inch (30cm) side leads with AWG #24* Longer leads available* Magnet: NdFeB* Color: white, brown, grey* Loop Type: closed * Reed Form: NO * Operating Gap Inch(mm): 1 1/2(40±10) * Max Contact Resistance Ohm: 0.2 * Max Rating Current mA: 500 * Max Switching Voltage VDC: 100* Size: 24DIA * 25L mm

n IM-130W

* ABS housing, ideal for metal door* Gap: 25~35mm* Size: 24DIA * 25L mm

IM-130W

Magnetic Switches

FEATURES

n IM-132

n IM-134

FEATURES

* Mini stick-on contact with flange* Self-adhesive and screw mount* 16inch (40cm) side leads with AWG #22* Magnet: NdFeB* Color: white, brown, grey* Loop Type: closed * Reed Form: NO * Operating Gap Inch(mm): 3/4(20±5) * Max Contact Resistance Ohm: 0.2 * Max Rating Current mA: 500 * Max Switching Voltage VDC: 100 * Size: 27L * 14W * 8H mm

* Metal magnetic contacts * Switch & magnet concealed in polished

alloy-zinc die-cast housing * 12 inch (30cm) side leads with AWG #22* Screws included* Reed : OKI®* Magnet: NdFeB* Ideal for commercial application or industrial

use* Loop Type: closed * Reed Form: NO * Operating Gap Inch(mm): 1 (25±5) * Max Contact Resistance Ohm: 0.2 * Max Rating Current mA: 500 * Max Switching Voltage VDC: 10* Size: 32L * 15W * 9H mm

n IM-133* Self-adhesive and screw mount concealed

terminals* Cover, spacer and screws included* Magnet: Permanent Ferrite* Color: white, brown, grey* Loop Type: closed * Reed Form: NO * Operating Gap Inch(mm): 1/2(16±5) * Max Contact Resistance Ohm: 0.2 * Max Rating Current mA: 500 * Max Switching Voltage VDC: 100 * Size: 64L * 19W * 13H

n IM-131* 3/8 inch diameter super miniature stubby

switch * ress fit mini contact* 12 inch (30cm) side leads with AWG #24 * Magnet: NdFeB* Color: white, brown, grey* Loop Type: closed * Reed Form: NO * Operating Gap Inch(mm): 3/4 (18±5) * Max Contact Resistance Ohm: 0.2 * Max Rating Current mA: 500 * Max Switching Voltage VDC: 100* Size: 12DIA * 18.5L mmMagnetic Switches

n IM-135

* Metal magnetic contacts * Switch & magnet concealed in polished

alloy-zinc die-cast housing * 20 inch (50cm) side leads with AWG #22* Screws included* Reed: OKI®* Magnet: NdFeB* Ideal for commercial application or industrial

use* Loop Type: closed * Reed Form: NO * Operating Gap Inch(mm): 2 (50±10) * Max Contact Resistance Ohm: 0.2 * Max Rating Current mA: 500 * Max Switching Voltage VDC: 100 * Size: 49L * 25W * 15H mm

Magnetic Switches

FEATURES

Magnetic Switches

FEATURES

n IM-140IM-140* Flange mounted, for non-steel* White, Brown is optional* Operating distance:16mm±5mm* White, Brown color is optional

n IM-136* Overhead door contact* Miniature floor mount* Switch & magnet concealed in polished

aluminum die-cast housing * 20 inch (50cm) stainless armored cable

with AWG #24* Reed: OKI®* Magnet: NdFeB* Long cable available on request* Loop Type closed * Reed Form NO * Operating Gap Inch(mm) 3(70±5) * Max Contact Resistance Ohm 0.2 * Max Rating Current mA 500 * Max Switching Voltage VDC 100 * Size: 106.5L * 38.2W * 10.3H mm

* Switch & magnet concealed in polished aluminum die-cast housing

* 12 inch side lead with AWG #24* Screws included* Reed: OKI®* Magnet: NdFeB* Ideal for commercial application or industrial

use* Loop Type: closed * Reed Form: NO * Operating Gap Inch(mm): 1 1/3(35±5) * Max Contact Resistance Ohm: 0.2 * Max Rating Current mA: 500 * Max Switching Voltage VDC: 100 * Size: 50L * 18W * 10H mm

n IM-138

n IM-139

* COM.,N/O,N/C * Switch & magnet concealed in polished

aluminum die-cast housing* 20 inch side lead with AWG #24* Screws included* Reed: OKI®* Magnet: NdFeB* Ideal for commercial application or industrial

use* Loop Type: closed * Reed Form: NO * Operating Gap Inch(mm): 2(50±10) * Max Contact Resistance Ohm: 0.2 * Max Rating Current Ma: 500 * Max Switching Voltage VDC: 100 * Size: 105L * 50W * 50W

Magnetic Switches

FEATURES

Magnetic Switches

FEATURES

n IM-141IM-141

* Magnet Contact (metal case)* Operating distance: 40mm±5mm* Apply for steel door

n IM-142IM-142

Alloy-Zn Magnetic Switches* Operation Gap: 50-80mm, * Size: 105.7mm*25mm*32mm(L*W*H)

n IM-143IM-143* Magnet Contact (ABS with silver

electroplating)* Operating distance: 40mm±5mm* Apply for steel door

n IM-144IM-144* Magnet Contact (metal case)* Operating distance: 50mm~70mm* COM.,N/O,N/C * Size: 105L*47.5W*9.5H

IM-146 n IM-146

* Magnet Contact (metal case), ideal for rolling door

* Operating distance: 50mm~70mm* COM.,N/O,N/C * Color: Grey* Size: 106*38mm* Switch 106*16*16.5mm Magnetic

FEATURES

Panic Button

FEATURES

Pedal Switch

n IM-02* Auto reset * ABS plastic housing * Electrical Life: more than 20,000 times* Large button has ”EMERGENCY” printed

on face* Color: White* Operating voltage: 12VDC/24VDC* Load current: 0.3A * Switch withstood voltage: 250VAC * Contact mode: COM, N/O, N/C* Size: 76*17*17mm

* Key reset * ABS Plastic or Metal Case Body* White or Grey Color Optional* Operating voltage: 12VDC/24VDC* Load current: 0.3A * Switch withstood voltage: 250VAC * Contact mode: COM, N/O, N/C* Size: 54*54*32mm

n IM-01

n IM-05

* Key Reset / Auto Reset* ABS Plastic Housing* Operating voltage: 12VDC/24VDC* Load current: 0.3A * Switch withstood voltage: 250VAC * Contact mode: COM, N/O, N/C* Size: 86*86*32mm

* Pedal Switch with Auto Reset * Used to trigger by you feet* Material: Polyamide* Color: grey* Operating voltage: 12VDC/24VDC* Load current: 10A* Switch withstood voltage: 250VAC * Contact mode: COM, N/O, N/C* Size: 83*80*30mm

n IM-06

Anti-tamper Switch

IM-15* Anti-tamper Switch* Operating voltage:12VDC* Load current≥1.25A* Use with security host or others

n IM-15

Panic Button

IM-07* Contact mode: COM, N/O, N/C* Size: 86*86*20mm

n IM-06

IMAKE International Co.,LtdAddress: Building 1, MeLi AAA, West of Renmin Rd., LongHua, Baoan, Shenzhen, 518109, P.R.China

Tel: +86-755-29567551

Web: www.imake.com.hk

Email: [email protected]

View Products

View Company Profile

Related Products:

Disclaimer: This Brochure is provided by this particular member. TradeKey.com will not be responsible or liable for any content posted by our members.

IMAKE INTERNATIONAL CO., LTD

call point,manual call point,break glass alarm,glass call point,manual alarmcall point,break glass call point,emergency break glass alarm,call pointmanufacturer

http://www.tradekey.com/profile_view/uid/4081612/.htm

http://www.tradekey.com/product_view/id/1332573/.htm

Y2011 Wired Intrusion Alarm...

Documents

Transcript of Y2011 Wired Intrusion Alarm...