Y Storm Giant Updated - media.prusaprinters.org · storm giant If you print this in pieces, print...
Transcript of Y Storm Giant Updated - media.prusaprinters.org · storm giant If you print this in pieces, print...
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
Summary
Want to access even more models not found here in Prusa Printers?Interested in supporting my efforts making free models for the world toenjoy? Check out my patreon page here: https://www.patreon.com/mz4250
Patrons have access to all my files in one place, a request board, as well ascommercial and commission options! Come check it out :-)
Toys & Games > Board games
storm giant
If you print this in pieces, print the shield and sword parts as flat aspossible. Do not print them as is. Use supports and a raft. The body byitself should be printed on its back with supports and a raft, but as isshouldn't be too bad either.
MZ4250
Storm GiantUpdated
VIEW IN BROWSER
updated 6. 1. 2020 | published 6. 1. 2020
3D M
ODEL
ONLY
317.3 KBupdated 6. 1. 2020
525.1 KBupdated 6. 1. 2020
609.5 KBupdated 6. 1. 2020
1.0 MBupdated 6. 1. 2020
1.1 MBupdated 6. 1. 2020
2.9 MBupdated 6. 1. 2020
17.7 MBupdated 6. 1. 2020
19.7 MBupdated 6. 1. 2020
19.5 MBupdated 6. 1. 2020
huge-creature-size-marker.stl
storm-giant-updated-shield-front.stl
storm-giant-updated-shield-rear.stl
storm-giant-updated-sword.stl
storm-giant-updated-shield-whole.stl
storm-giant-updated.blend
storm-giant-updated-body-only.stl
storm-giant-updated-whole.stl
storm-giant-updated-whole-no-stand.stl
The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition