Y Sorceress: Spellcaster! - PrusaPrinters · 367.8 KB updated 10. 3. 2020 1.2 MB updated 10. 3....
4
Summary This is a "sequel" to my original Sorceress model: https://cults3d.com/en/3d-model/art/the-sorceress In this sculpt I wanted to make her far more dynamic - in this pose she is about to cast a most powerful spell (or at least that's the way I see it). I started this sculpt ages ago and then dropped it because well - it happens. Upon revisiting her, I changed her hair so she will print on my resin printers without supports. She will work well for FDM too but you may need something to support her chin. She is a free model to say thank to all those people who purchase my commercial work. There is also a "saucy" version of this Sorceress available in the "naughties" section on Cults: https://cults3d.com/en/3d-model/naughties/the-saucy-sorceress Art & Design > Sculptures Loubie3D Sorceress: Spellcaster! VIEW IN BROWSER updated 10. 3. 2020 | published 10. 3. 2020 3D MODEL ONLY
Transcript of Y Sorceress: Spellcaster! - PrusaPrinters · 367.8 KB updated 10. 3. 2020 1.2 MB updated 10. 3....
Summary
This is a "sequel" to my original Sorceress model:
https://cults3d.com/en/3d-model/art/the-sorceress
In this sculpt I wanted to make her far more dynamic - in this pose she isabout to cast a most powerful spell (or at least that's the way I see it).
I started this sculpt ages ago and then dropped it because well - ithappens. Upon revisiting her, I changed her hair so she will print on myresin printers without supports. She will work well for FDM too but you mayneed something to support her chin.
She is a free model to say thank to all those people who purchase mycommercial work.
There is also a "saucy" version of this Sorceress available in the"naughties" section on Cults:
https://cults3d.com/en/3d-model/naughties/the-saucy-sorceress
Art & Design > Sculptures
Loubie3D
Sorceress:Spellcaster!
VIEW IN BROWSER
updated 10. 3. 2020 | published 10. 3. 2020
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
sorceress magic figurine fanatsy
Category: Art Print Settings
Rafts: No
Supports: No
Notes:
Designed to be printed on a resin printer. Has been tested on the PrusaSL1 and the Elegoo Mars.
For convenience, I am including the following files:
1) The model as a solid. This is suitable for FDM printing and for resinprinting, people can make their own decisions regarding hollowing and/ordrain hole locations. For FDM printing you may need supports for her chin.I did not find this necessary for resin printing.
2) The hollow shape and drain holes as subtractive shapes that I used.These can be used as a point of reference or just some ideas. You wouldneed to subtract these from the solid.
3) The model pre-hollowed with my shape and drain holes. This issuggested only with the model at the current scale and printed with thebase flat on the bed and was successful with the Prusa SL1 and the ElegooMars. I do not guarantee success with other printer models and scales andyou use these at your own risk.
How I Designed This
How to make the Shiny!
I wrote an Instructable describing how to post process models like this. Itmainly concerns my dragon chess set but the method will work for theSorceress too:
https://www.instructables.com/id/Dragon-Chess-Painting-the-Dragons/
367.8 KBupdated 10. 3. 2020
1.2 MBupdated 10. 3. 2020
12.2 KBupdated 10. 3. 2020
24.7 MBupdated 10. 3. 2020
20.2 MBupdated 10. 3. 2020
Find source .stl files on Thingiverse.com
The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution—Noncommercial—No Derivates
large_display_sorceress_spellcaster_hollow_with_h.stl
hollow_shape.stl
drain_holes.stl
sorceress_spellcaster_hollow_with_holes.stl
sorceress_spellcaster_solid.stl
✖ | Sharing without ATTRIBUTION ✖ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition
