Y Multi-part Lifesize Mjolnir: The Hammer of Thor...Marvel Cinematic Universe. It was designed in...
4
Summary This is a multi-part version of Mjolnir based on the design used in the Marvel Cinematic Universe. It was designed in Fusion 360. This is the parts list: Hammer: 1x HammerBot.stl 1x HammerTop.stl 2x HammerEnd.stl 1x HammerCap.stl 4x Core Connectors Each core connector has its clearance measurement in the file name. On my Prusa Mk3s, the .2mm works best. 8x Details Both loose and tight detail files are included. I would recommend printing one of each and testing them for fit then printing more of whichever worked best. Handle: 1x HandleBot.stl 1x HandleMid.stl 1x HandleTop.stl This design also uses a 370mm x 3/4" wooden dowel rod to provide additional strength to the print. The handle parts also have registration pins for pieces of 1.75mm filament to keep them lined up. I used 3D Gloop to assemble the entire design but any glue should work. Jmakes3D Multi-part Lifesize Mjolnir: The Hammer of Thor VIEW IN BROWSER updated 13. 10. 2019 | published 13. 10. 2019 3D MODEL ONLY
Transcript of Y Multi-part Lifesize Mjolnir: The Hammer of Thor...Marvel Cinematic Universe. It was designed in...
Summary
This is a multi-part version of Mjolnir based on the design used in theMarvel Cinematic Universe. It was designed in Fusion 360. This is the partslist: Hammer: 1x HammerBot.stl 1x HammerTop.stl 2x HammerEnd.stl 1xHammerCap.stl 4x Core Connectors Each core connector has its clearancemeasurement in the file name. On my Prusa Mk3s, the .2mm works best.8x Details Both loose and tight detail files are included. I wouldrecommend printing one of each and testing them for fit then printingmore of whichever worked best.
Handle: 1x HandleBot.stl 1x HandleMid.stl 1x HandleTop.stl
This design also uses a 370mm x 3/4" wooden dowel rod to provideadditional strength to the print. The handle parts also have registrationpins for pieces of 1.75mm filament to keep them lined up.
I used 3D Gloop to assemble the entire design but any glue should work.
Jmakes3D
Multi-part LifesizeMjolnir: TheHammer of Thor
VIEW IN BROWSER
updated 13. 10. 2019 | published 13. 10. 2019
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
5.7 MBupdated 13. 10. 2019
822.2 KBupdated 13. 10. 2019
3.1 MBupdated 13. 10. 2019
825.9 KBupdated 13. 10. 2019
2.2 KBupdated 13. 10. 2019
18.2 KBupdated 13. 10. 2019
2.2 KBupdated 13. 10. 2019
Costumes & Accessories > Props
thor prop mjolnir hammer cosplay
handlebot.stl
details_tight.stl
handlemid.stl
details_loose.stl
coreconnector_4mm.stl
hammerend.stl
coreconnector_2mm.stl
2.2 MBupdated 13. 10. 2019
78.7 KBupdated 13. 10. 2019
2.2 KBupdated 13. 10. 2019
177.2 KBupdated 13. 10. 2019
132.8 KBupdated 13. 10. 2019
The Author has not uploaded any G-codes.Try to search in User G-codes section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed
handletop.stl
hammertop.stl
coreconnector_8mm.stl
hammercap.stl
hammerbot.stl
✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition
