XXXXX Klamp Catalogue -...
16
Transcript of XXXXX Klamp Catalogue -...
COLLET CHUCK
COLLET CHUCK
COLLETCHUCK
Specifications
Dimensions
Varibore D-671 D-120 D-120 D-677 D-285 D-285 D-285 Spring D171E - - - - - -
COLLET CHUCK
COLLET CHUCK
COLLETCHUCK
3Collet Chuck Series
Specifications
Dimensions
Varibore D-671 D-120 D-120 D-677 D-285 D-285 D-285 Spring D171E - - - - - -
COLLET CHUCK
COLLET CHUCK
COLLETCHUCK
Specifications
Dimensions
Varibore D-671 D-120 D-120 D-677 D-285 D-285 D-285 Spring D171E - - - - - -
COLLET CHUCK
COLLET CHUCK
COLLETCHUCK
3Collet Chuck Series
Specifications
Dimensions
Varibore D-671 D-120 D-120 D-677 D-285 D-285 D-285 Spring D171E - - - - - -
COLLETCHUCK
4 Collet Chuck Series
-12
Specifications
Dimensions
D-673 D-673 D-673 D-677 D-677 D-677DIN6343 DIN6343 DIN6343 D-120 DIN6343 DIN6343 DIN6343
D173E 4728 D173E 4728 D173E 4728 D-853 D185E 4291 D185E 4291 D185E
COLLETCHUCK
5Collet Chuck Series
D-850 D-673 D-120 D-677
*QCRL54 and 60 models can be supplied with additional 42mm Inch and Din collet reduction sleeves and caps. See accessory page for details and part numbers.
D-286 D173E D-853 D185E
Specifications
Dimensions
COLLETCHUCK
4 Collet Chuck Series
-12
Specifications
Dimensions
D-673 D-673 D-673 D-677 D-677 D-677DIN6343 DIN6343 DIN6343 D-120 DIN6343 DIN6343 DIN6343
D173E 4728 D173E 4728 D173E 4728 D-853 D185E 4291 D185E 4291 D185E
COLLETCHUCK
5Collet Chuck Series
D-850 D-673 D-120 D-677
*QCRL54 and 60 models can be supplied with additional 42mm Inch and Din collet reduction sleeves and caps. See accessory page for details and part numbers.
D-286 D173E D-853 D185E
Specifications
Dimensions
Specifications CRL42 CRL42A5 CRL42A6 CRL54A6 CRL60 CRL60A6 CRL60A8 CRL80 CRL80A8
Gripping Range Max mm 42 42 42 54 60 60 60 80 80
Min mm 1.6 1.6 1.6 1.6 1.6 1.6 1.6 12 12
Collet Increment mm 3 3 3 3 3 3 3 3 3
Sleeve Stroke mm 7 7 7 10 7 7 7 12 12
Max Input Force kN 25 25 25 30 30 30 30 45 45
Max Gripping Force kN 55 55 55 60 60 60 60 78 78
Max Speed (r.p.m.) min-1 7100 7100 7100 6300 6300 6300 6300 4500 4500
Net Weight kg 10 9.5 10.7 15 15.2 15 18 30 30
Matching Cylinder S1246 S1246 S12546 S1552/75 S1552/75 S1552/75 S1552/75 S2091 S2091
VariboreD-673
DIN6343D-673
DIN6343D-673
DIN6343 D-120D-677
DIN6343D-677
DIN6343D-677
DIN6343 D-660 D-660Collet Ref
Spring D173E 4728 D173E 4728 D173E 4728 D-853 D185E 4291 D185E 4291 D185E D193E D193E
Dimensions CRL42 CRL42A5 CRL42A6 CRL54A6 CRL60 CRL60A6 CRL60A8 CRL80 CRL80A8
Mount 140 x 5 A2-5 A2-6 A2-6 170 x 5 A2-6 A2-8 220 x 6 A2-8
A 110 110 110 138 138 138 138 190 190
B 133 143 145 160 148 160 156 170 176
C 20 20 33 27 24 27 36 19 25
D 30 30 30 25 30 30 30 63 63
E M55 x 1.5 M55 x 1.5 M55 x 1.5 M70 x 1.5 M70 x 1.5 M70 x 1.5 M70 x 1.5 M90 x 2.0 M100 x 2.0
F 62 62 62 80 80 80 80 100 100
G Max 11 1 -1 -2 1- -2 2 48 42
G Min 4 -6 -8 -12 3 -9 -5 36 30
H 160 135 165 165 190 165 210 230 220
COLLETCHUCK
4 Collet Chuck Series
-12
Specifications
Dimensions
D-673 D-673 D-673 D-677 D-677 D-677DIN6343 DIN6343 DIN6343 D-120 DIN6343 DIN6343 DIN6343
D173E 4728 D173E 4728 D173E 4728 D-853 D185E 4291 D185E 4291 D185E
COLLETCHUCK
5Collet Chuck Series
D-850 D-673 D-120 D-677
*QCRL54 and 60 models can be supplied with additional 42mm Inch and Din collet reduction sleeves and caps. See accessory page for details and part numbers.
D-286 D173E D-853 D185E
Specifications
Dimensions
COLLETCHUCK
4 Collet Chuck Series
-12
Specifications
Dimensions
D-673 D-673 D-673 D-677 D-677 D-677DIN6343 DIN6343 DIN6343 D-120 DIN6343 DIN6343 DIN6343
D173E 4728 D173E 4728 D173E 4728 D-853 D185E 4291 D185E 4291 D185E
COLLETCHUCK
5Collet Chuck Series
D-850 D-673 D-120 D-677
*QCRL54 and 60 models can be supplied with additional 42mm Inch and Din collet reduction sleeves and caps. See accessory page for details and part numbers.
D-286 D173E D-853 D185E
Specifications
Dimensions
COLLETCHUCK
6 Collet Chuck Series
Specifications
COLLETCHUCK
7Collet Chuck Series
Specifications
Pull Back 5C 16C
COLLETCHUCK
6 Collet Chuck Series
Specifications
COLLETCHUCK
7Collet Chuck Series
Specifications
Pull Back 5C 16C
COLLETCHUCK
6 Collet Chuck Series
Specifications
COLLETCHUCK
7Collet Chuck Series
Specifications
Pull Back 5C 16C
COLLETCHUCK
6 Collet Chuck Series
Specifications
COLLETCHUCK
7Collet Chuck Series
Specifications
Pull Back 5C 16C
COLLETCHUCK
8 Collet Chuck Series
COLLETCHUCK
9Collet Chuck Series
125 125
210
162 162
A2-5 A2-6
DC-65 DC-65 DC-65
Specifications
Dimensions
Varibore
DHF65-A6 DHF65-A8DHF65-A5
DHF65-A5 DHF65-A6
125
162
A2-8
DHF65-A8
60
M70x2
79
42.5
38
0.5
4.5
4
65
45
105
6000
12
S1875
0.5
4.5
4
65
45
105
6000
12
S1875
0.5
4.5
4
65
45
105
6000
12
S1875
210
60
M85x2
92
42.5
38
210
60
M85x2
92
42.5
38
COLLETCHUCK
8 Collet Chuck Series
COLLETCHUCK
9Collet Chuck Series
125 125
210
162 162
A2-5 A2-6
DC-65 DC-65 DC-65
Specifications
Dimensions
Varibore
DHF65-A6 DHF65-A8DHF65-A5
DHF65-A5 DHF65-A6
125
162
A2-8
DHF65-A8
60
M70x2
79
42.5
38
0.5
4.5
4
65
45
105
6000
12
S1875
0.5
4.5
4
65
45
105
6000
12
S1875
0.5
4.5
4
65
45
105
6000
12
S1875
210
60
M85x2
92
42.5
38
210
60
M85x2
92
42.5
38
COLLETCHUCK
8 Collet Chuck Series
COLLETCHUCK
9Collet Chuck Series
125 125
210
162 162
A2-5 A2-6
DC-65 DC-65 DC-65
Specifications
Dimensions
Varibore
DHF65-A6 DHF65-A8DHF65-A5
DHF65-A5 DHF65-A6
125
162
A2-8
DHF65-A8
60
M70x2
79
42.5
38
0.5
4.5
4
65
45
105
6000
12
S1875
0.5
4.5
4
65
45
105
6000
12
S1875
0.5
4.5
4
65
45
105
6000
12
S1875
210
60
M85x2
92
42.5
38
210
60
M85x2
92
42.5
38
COLLETCHUCK
8 Collet Chuck Series
COLLETCHUCK
9Collet Chuck Series
125 125
210
162 162
A2-5 A2-6
DC-65 DC-65 DC-65
Specifications
Dimensions
Varibore
DHF65-A6 DHF65-A8DHF65-A5
DHF65-A5 DHF65-A6
125
162
A2-8
DHF65-A8
60
M70x2
79
42.5
38
0.5
4.5
4
65
45
105
6000
12
S1875
0.5
4.5
4
65
45
105
6000
12
S1875
0.5
4.5
4
65
45
105
6000
12
S1875
210
60
M85x2
92
42.5
38
210
60
M85x2
92
42.5
38
Specifications DHF65-A5 DHF65-A6 DHF65-A8 DHF80-A8
Gripping Range -Round
Max mm 65 65 65 80
Min mm 4 4 4 5.5
Collet Increment mm 0.5 0.5 0.5 0.5Sleeve Stroke mm 4.5 4.5 4.5 4.5Max Input Force kN 45 45 45 53Max Gripping Force kN 105 105 105 96Max Speed (r.p.m.) min-1 6000 6000 6000 5000Net Weight kg 12 12 12 35Matching Cylinder S1875 S1875 S1875 S2091Collet / Clamping Head Varibore DC-65 DC-65 DC-65 DC-80
Dimensions DHF65-A5 DHF65-A6 DHF65-A8 DHF80-A8
Mount A2-5 A2-6 A2-8 A2-8A 162 162 162 175B 125 125 125 137C 210 210 210 239D 60 60 60 49E Max M70 x2 M85 x 2 M85 x 2 M100 x 2F 79 92 92 105G Max 42.5 42.5 42.5 48.25G Min 38 38 38 43.75
Length (A) Diameter (B) Taper (C)
• Spring collets used primarily for second operation work, where marking of the component is to be avoided, or where necessary to grip a short portion of the component.• Collet bore diameters are dedicated.• Emergency collets are supplied where fast turn around, small batch quantities are machined.
• Inch varibore collets have a gripping range of 1/8” on diameter and feature a plain bore.• Metric round DIN varibore collets have a gripping range of 2mm on diameter and have a spiral gripping surface (above 8mm).•• Metric hex and square DIN varibore collets use a gripping range of 2mm and feature annular gripping surface (above 8mm).• Optional heavy duty collets are available for black bar (may cause marking).
COLLETCHUCK
10 Collet Chuck Series
Varibore Collets
Length (A) Diameter (B) Taper (C)
Spring Collets
Length (A) Diameter (B) Taper (C)
• Spring collets used primarily for second operation work, where marking of the component is to be avoided, or where necessary to grip a short portion of the component.• Collet bore diameters are dedicated.• Emergency collets are supplied where fast turn around, small batch quantities are machined.
• Inch varibore collets have a gripping range of 1/8” on diameter and feature a plain bore.• Metric round DIN varibore collets have a gripping range of 2mm on diameter and have a spiral gripping surface (above 8mm).•• Metric hex and square DIN varibore collets use a gripping range of 2mm and feature annular gripping surface (above 8mm).• Optional heavy duty collets are available for black bar (may cause marking).
COLLETCHUCK
10 Collet Chuck Series
Varibore Collets
Length (A) Diameter (B) Taper (C)
Spring Collets
Length (A) Diameter (B) Taper (C)
• Spring collets used primarily for second operation work, where marking of the component is to be avoided, or where necessary to grip a short portion of the component.• Collet bore diameters are dedicated.• Emergency collets are supplied where fast turn around, small batch quantities are machined.
• Inch varibore collets have a gripping range of 1/8” on diameter and feature a plain bore.• Metric round DIN varibore collets have a gripping range of 2mm on diameter and have a spiral gripping surface (above 8mm).•• Metric hex and square DIN varibore collets use a gripping range of 2mm and feature annular gripping surface (above 8mm).• Optional heavy duty collets are available for black bar (may cause marking).
COLLETCHUCK
10 Collet Chuck Series
Varibore Collets
Length (A) Diameter (B) Taper (C)
Spring Collets
Length (A) Diameter (B) Taper (C)
• Spring collets used primarily for second operation work, where marking of the component is to be avoided, or where necessary to grip a short portion of the component.• Collet bore diameters are dedicated.• Emergency collets are supplied where fast turn around, small batch quantities are machined.
• Inch varibore collets have a gripping range of 1/8” on diameter and feature a plain bore.• Metric round DIN varibore collets have a gripping range of 2mm on diameter and have a spiral gripping surface (above 8mm).•• Metric hex and square DIN varibore collets use a gripping range of 2mm and feature annular gripping surface (above 8mm).• Optional heavy duty collets are available for black bar (may cause marking).
COLLETCHUCK
10 Collet Chuck Series
Varibore Collets
Length (A) Diameter (B) Taper (C)
Spring Collets
• Optional reduction sleeve and cap sets allow a variety of collet types to be used in the same chuck body.
• Precision manufactured and matched to chuck body to guarantee accuracy.
• Standard models are Q-RSC6042 and RSC6042 allowing DIN 42 collets to be used in 60mm chucks.
• Alternate reduction options are available to order.
• Chuck adaptors available to all spindle mount types.
• Extra wide chuck adaptors allows small chucks to be assembled to large spindles.
• The QCRL chuck range features an interchangeable back body for different spindle mounts
• Drawtube connectors are precision machined to allow collet chucks to be easily connected to a wide range of lathe types.
• All chucks include blank connector as standard.
• Custom part ejectors and xed length stops are avail-able to order.
• Reduces coolant and chip ingress into chuck / collet.
• Bar seal should be prepared to suit bar stock diameter.
• Compatible with QCRL range only. Bar seal and retaining cap supplied as standard with QCRL chuck range.
COLLETCHUCK
12 Collet Chuck Series
Reduction Sleeve and Cap
Standard and Custom Collet Chuck Adaptors
Drawtube Connectors and Ejectors
Bar Seals
The Kitagawa Chuck series offers a complete range of hydraulic, pneumatic and manual chucks. Many years of application experience allows Kitagawa to offer solutions to a range of workholding problems.
The Kitagawa Cylinder series is designed to comple-ment Kitagawa chucks to ensure optimum perfor-mance and safety. Kitagawa cylinders include light-weight compact design for high speed and internal lock valves for safe operation.
The Kitagawa NC Rotary Table series offers a wide va-riety of 4th and 5th axis models to suit many applica-tions. Rotary Tables feature a rigid body design, powerful brake clamping forces and high indexing accuracy
The Kitagawa Power Vise series features adjust-able clamping force, high accuracy and low pro-le design across the range
The Kitagawa Workgripper series offers a complete range of pneumatic and hydraulic workholding for a variety of static applications.
• Optional reduction sleeve and cap sets allow a variety of collet types to be used in the same chuck body.
• Precision manufactured and matched to chuck body to guarantee accuracy.
• Standard models are Q-RSC6042 and RSC6042 allowing DIN 42 collets to be used in 60mm chucks.
• Alternate reduction options are available to order.
• Chuck adaptors available to all spindle mount types.
• Extra wide chuck adaptors allows small chucks to be assembled to large spindles.
• The QCRL chuck range features an interchangeable back body for different spindle mounts
• Drawtube connectors are precision machined to allow collet chucks to be easily connected to a wide range of lathe types.
• All chucks include blank connector as standard.
• Custom part ejectors and xed length stops are avail-able to order.
• Reduces coolant and chip ingress into chuck / collet.
• Bar seal should be prepared to suit bar stock diameter.
• Compatible with QCRL range only. Bar seal and retaining cap supplied as standard with QCRL chuck range.
COLLETCHUCK
12 Collet Chuck Series
Reduction Sleeve and Cap
Standard and Custom Collet Chuck Adaptors
Drawtube Connectors and Ejectors
Bar Seals
The Kitagawa Chuck series offers a complete range of hydraulic, pneumatic and manual chucks. Many years of application experience allows Kitagawa to offer solutions to a range of workholding problems.
The Kitagawa Cylinder series is designed to comple-ment Kitagawa chucks to ensure optimum perfor-mance and safety. Kitagawa cylinders include light-weight compact design for high speed and internal lock valves for safe operation.
The Kitagawa NC Rotary Table series offers a wide va-riety of 4th and 5th axis models to suit many applica-tions. Rotary Tables feature a rigid body design, powerful brake clamping forces and high indexing accuracy
The Kitagawa Power Vise series features adjust-able clamping force, high accuracy and low pro-le design across the range
The Kitagawa Workgripper series offers a complete range of pneumatic and hydraulic workholding for a variety of static applications.
• Optional reduction sleeve and cap sets allow a variety of collet types to be used in the same chuck body.
• Precision manufactured and matched to chuck body to guarantee accuracy.
• Standard models are Q-RSC6042 and RSC6042 allowing DIN 42 collets to be used in 60mm chucks.
• Alternate reduction options are available to order.
• Chuck adaptors available to all spindle mount types.
• Extra wide chuck adaptors allows small chucks to be assembled to large spindles.
• The QCRL chuck range features an interchangeable back body for different spindle mounts
• Drawtube connectors are precision machined to allow collet chucks to be easily connected to a wide range of lathe types.
• All chucks include blank connector as standard.
• Custom part ejectors and xed length stops are avail-able to order.
• Reduces coolant and chip ingress into chuck / collet.
• Bar seal should be prepared to suit bar stock diameter.
• Compatible with QCRL range only. Bar seal and retaining cap supplied as standard with QCRL chuck range.
COLLETCHUCK
12 Collet Chuck Series
Reduction Sleeve and Cap
Standard and Custom Collet Chuck Adaptors
Drawtube Connectors and Ejectors
Bar Seals
The Kitagawa Chuck series offers a complete range of hydraulic, pneumatic and manual chucks. Many years of application experience allows Kitagawa to offer solutions to a range of workholding problems.
The Kitagawa Cylinder series is designed to comple-ment Kitagawa chucks to ensure optimum perfor-mance and safety. Kitagawa cylinders include light-weight compact design for high speed and internal lock valves for safe operation.
The Kitagawa NC Rotary Table series offers a wide va-riety of 4th and 5th axis models to suit many applica-tions. Rotary Tables feature a rigid body design, powerful brake clamping forces and high indexing accuracy
The Kitagawa Power Vise series features adjust-able clamping force, high accuracy and low pro-le design across the range
The Kitagawa Workgripper series offers a complete range of pneumatic and hydraulic workholding for a variety of static applications.
• Optional reduction sleeve and cap sets allow a variety of collet types to be used in the same chuck body.
• Precision manufactured and matched to chuck body to guarantee accuracy.
• Standard models are Q-RSC6042 and RSC6042 allowing DIN 42 collets to be used in 60mm chucks.
• Alternate reduction options are available to order.
• Chuck adaptors available to all spindle mount types.
• Extra wide chuck adaptors allows small chucks to be assembled to large spindles.
• The QCRL chuck range features an interchangeable back body for different spindle mounts
• Drawtube connectors are precision machined to allow collet chucks to be easily connected to a wide range of lathe types.
• All chucks include blank connector as standard.
• Custom part ejectors and xed length stops are avail-able to order.
• Reduces coolant and chip ingress into chuck / collet.
• Bar seal should be prepared to suit bar stock diameter.
• Compatible with QCRL range only. Bar seal and retaining cap supplied as standard with QCRL chuck range.
COLLETCHUCK
12 Collet Chuck Series
Reduction Sleeve and Cap
Standard and Custom Collet Chuck Adaptors
Drawtube Connectors and Ejectors
Bar Seals
The Kitagawa Chuck series offers a complete range of hydraulic, pneumatic and manual chucks. Many years of application experience allows Kitagawa to offer solutions to a range of workholding problems.
The Kitagawa Cylinder series is designed to comple-ment Kitagawa chucks to ensure optimum perfor-mance and safety. Kitagawa cylinders include light-weight compact design for high speed and internal lock valves for safe operation.
The Kitagawa NC Rotary Table series offers a wide va-riety of 4th and 5th axis models to suit many applica-tions. Rotary Tables feature a rigid body design, powerful brake clamping forces and high indexing accuracy
The Kitagawa Power Vise series features adjust-able clamping force, high accuracy and low pro-le design across the range
The Kitagawa Workgripper series offers a complete range of pneumatic and hydraulic workholding for a variety of static applications.
COLLETCHUCK
15Collet Chuck Series
Drawtube Connector / Machine Spindle Information
COLLETCHUCK
15Collet Chuck Series
Drawtube Connector / Machine Spindle Information
COLLETCHUCK
15Collet Chuck Series
Drawtube Connector / Machine Spindle Information
COLLETCHUCK
15Collet Chuck Series
Drawtube Connector / Machine Spindle Information
Europe ContactKITAGAWA EUROPE LTD. (UK)t +44 1725 514 000 f +44 1725 514 001
KITAGAWA EUROPE GmbH (Germany)t +49 210 212 37800 f +49 210 212 37869e [email protected]
KITAGAWA EUROPE (Poland)t +48 32 749 59 18 f +48 32 749 59 18e [email protected]
KITAGAWA EUROPE GmbH (Czech Republic)t +420 603 856 122 f +420 549 273 246e [email protected]
KITAGAWA EUROPE (Romania)t +40 727 770 329 e [email protected]
American ContactKITAGAWA – NORTHTECH INC.t +1 847 310 8787 f +1 847 310 9484
Asian ContactKITAGAWA PVT LTD. (India)t +91 80 2976 5200 f +91 80 2976 5205e [email protected]
KITAGAWA IRON WORKS CO., LTD. (Japan)t +81 847 40 0526 f +81 847 450 8911
KITAGAWA IRON WORKS CO., LTD. (Singapore)t +65 6838 4318 f +65 6408 3935
KITAGAWA IRON WORKS CO., LTD. (China)t +86 21 6295 5772 f +86 21 6295 5772
KITAGAWA CO., LTD. (Thailand)t +66 2 712 7479 f +66 2 712 7481
DEAMARK LIMITED (Taiwan)t +886 2 2393 1221 f +886 2 2395 1231
KITAGAWA CO., LTD. (Korea)t +82 2 2026 2222 f +82 2 2026 2113
Oceania ContactDIMAC TOOLING PTY. LTD. (Australia)t +61 3 9561 6155 f +61 3 9561 6705
Unit 1, The Headlands, Downton, Salisbury, Wiltshire, SP5 3JJ, UKwww.kitagawaeurope.com
Borsigstrasse 3, 40880 Ratingen, Germanywww.kitagawaeurope.de
44-240 Żory, ul. Niepodległości 3, Poland www.kitagawaeurope.com
Lysicka 3, 621 00 Brnowww.kitagawaeurope.com
Heliului 15, Bucharest 1, 013991, Romania www.kitagawaeurope.de
301 E. Commerce Dr, Scaumburg, IL. 60173, USAwww.kitagawa.com
Plot No. 15, 4th Phase, Bommasandra Industrial Area, Bommasandra Jigani Link Road, Bangalore - 560 099www.kitagawaindia.com
77-1 Motomachi, Fuchi-shi, Hiroshima-pref. 726-8610, Japanwww.mta.kiw.co.jp
02-01 One Fullerton, 1 Fullerton Road, Singapore, 049213
Room 1315 13F Building B, Far East International Plaza,No. 317 Xian Xia Road, Chang Ning, Shanghai, 20051, China
9th FL, Home Place Office Building, 283/43 Sukhumvit, 55Rd.(Thonglor 13), Klongtopn-Nua, Wattana, Bangkok 10110, Thailand
No. 6, Lane 5, Lin Sen North Road, Taipei, Taiwanwww.demark.com/tw
803 Ho, B-Dong, Woolim Lion’s Valley, 371-28 Gasan-Dong, Gumcheon-Cu, Seoul, Korea www.kitagawa.co.kr
61-65 Geddes Street, Mulgrave, Victoria, 3170 Australiawww.dimac.co.au
Specifications and dimensions subject to change without notice due to ongoing development. CNO: DEL 09-2 RJ23 11/09
![Klee Klamp SBC Safety Components Catalog 09[1] - Copy](https://static.fdocuments.net/doc/165x107/54fc66924a795937538b5098/klee-klamp-sbc-safety-components-catalog-091-copy.jpg)
