Xtreme 25 - Noack › wp-content › uploads › 2018 › 03 › Xtre… · “Xtreme 25” is...
4
XTREME 25 LOW INCLUSION FEED BINDER Xtreme 25 Proof 2 - 05 December 2008
Transcript of Xtreme 25 - Noack › wp-content › uploads › 2018 › 03 › Xtre… · “Xtreme 25” is...
XTREME 25LOW INCLUSION FEED BINDER
Xtr
eme
25Proof 2 - 05 December 2008
Borregaard has a long experience in the global supply of specially designed lignin products for the
animal feed industry, as a result of our ongoing commitment to animal feed technology; we are
pleased to introduce our newest innovative development:
“Xtreme 25” an EU approved technological feed additive.
XTREME 25
Providing solution... from nature
“Xtreme 25” is designed and produced from modified lignosulphonate specially selected for its low molecularweight. The unique processing and modification of thismaterial, results in a product with sodium salts and a higher than normal level of carbohydrate and pH.
Lignin is a polymer containing phenylpropane units, inwood these form three dimensional network structureswhich chemically bind the cellulose and other carbohydrates together and is why lignosulphonate hasbeen used for many years as a natural binder in manyindustrial applications as well as for use as a binder of rawmaterials used in the manufacture of pelleted animal feed.
Dry matter (%) min 93
pH (10% solution) 5.0 0.5
Density (kg/m3) 500
ValueParameter
CH²OH
H²CO
H²CO
H²CO
H²CO
H²CO
H²CO
OCH²
OCH²
HOCH²
HC
HCOH
O
CH²OH
HC
CH
OH
O
O
H²CO H
²COH
H²COH
H²COH
HCOH
CH
HC
HC
HC O
O
O
CH
CH
OH OH
H²COH
H²COH
H²COH
H²COH
H²COH
H²C
CH²
CH
CHHC
HC
HCH²C
HCOH
HCOH
CH
HC O
C
H
O OO
O
H
OH
CH²COH
OCH²
OCH²
OCH²
OCH²
OCH²
H²CO
OCH²
HC O
O
O
O
O
C OHCOH
HCOH
HCOH
HCOH
HC
HC
CHHO
O
HC
CH
CH
O
+_
“Xtreme 25” has been proven to exhibit superior bindingcharacteristics compared to other commercial products.
Additionally in comparative trials (Figure 1) with otherknown low inclusion feed binder raw materials, such asguar gum, methyl cellulose, starch and carboxyl methylcellulose, “Xtreme 25” was found to exhibit superior binding characteristics when used at the same inclusion.
Figure 1. Improvement over non use at 0.25% inclusion
In comparison to LignoBond DD a full bodied lignosulphonate feed binder, it can be seen from (Figure 2)the same effect in the reduction of fines can be achievedby using 2.5 kg/Mt (0.25%) of “Xtreme 25” than wasachieved using 6 kg/Mt (0.6%) of LignoBond DD.
5%
10%
15%
20%
25%
30%
Guar Gum Methyl C Starch CMC Xtreme 25Figure 2.
10
20
30
40
50
No Binder Lig DD 0.25 Lig DD 0.50 Lig DD 1.0
LignoBond DD
Liner (LignoBond DD)
Xtreme 25
Improvement to durability (pdi)
Reduction in fines (%)
More productivity (t/Hr)
Less energy used (kW)
Improved process efficiency (kWh/T)
Less space required in ration (kg/T)
Cost effective (€£$)
Benefits of using “XTREME 25”
The use of this low inclusion feed binder will improve
pellet durability resulting in reduced fines whilst improving
productivity, energy savings and pelleting process
efficiency. The advantage of using a low inclusion feed
binder in today’s climate of high cost feed ingredients are:
• To keep to a minimum the available space utilised for
the addition of a technological additive used to improve
the physical characteristic of high density feed rations.
• Thus allowing the nutrient requirements of the feed
specification to be achieved, whilst presenting these to
the animal in a dust free physical form.
Savings in logistic and storage due to the lower dose (€£$)
Providing solution... from nature
Borregaard LignoTechPO. Box 162, NO-1701 Sarpsborg, NorwayTel: +47 69 11 80 00Fax: +47 69 11 87 90
Email: [email protected]
