Processes MIG (GMAW) Pulsed MIG (GMAW-P) with pulsing power source

Wire Types Aluminum Stainless steel Cored (gas-shielded)

Rated Output at 100% Duty Cycle Air-cooled: 300 A Water-cooled: 400 A

Net Weight (Gun Only) Air-cooled: 2.5 lb. (1.1 kg) Water-cooled: 2.9 lb. (1.3 kg)

Heavy Industrial Applications Emergency vehicles Shipbuilding Recreational vehicles Tool boxes Trucks and trailers Railcars Heat exchangers Fabrication Sign manufacturers

Issued April 2020 • Index No. M/1.71

Replaceable feed cable liner is designed to provide consistent arc performance. It also reduces parts cost and service time by allowing a simple means of removing and

replacing liner and not the complete feed cable.

Serviceability. This gun features a cable cover with full-length hook-and-loop closure and integrated strain

reliefs for easy cable maintenance and protection. The gun also features quick connectors between

the control cable and electrical components (trigger, motor, and potentiometer).

Isolated, common, knurled drive roll helps reduce wear, reducing downtime and cost.

Gun feeds .030–3/64 inch right out of the box without need for separate drive

rolls. Kit 230708 is required to run 1/16-inch (1.6 mm) wire.

Easy access to drive assembly and removable head tube

reduces service time. Pressure release lever

allows drive rolls to be held open for

wire changeover.

Guns are warrantied for one year, parts and labor.

The XR-Aluma-Pro gun is designed to be used with the Millermatic® 350P Aluminum power source or XR-AlumaFeed® Suitcase® feeder as part of a push-pull system.

The industry’s most reliable line of push-pull welding guns.

XR-Aluma-Pro™ Gooseneck-Style Push-Pull Gun

MIG Gun for Aluminum Welding

Quick Specs

Easy-to-rotate, self-seating head tube options in several different lengths and bend configurations (see page 3).

Miller Electric Mfg. LLC An ITW Welding Company 1635 West Spencer Street P.O. Box 1079 Appleton, WI 54912-1079 USA

MillerWelds.comEquipment Sales US and Canada Phone: 866-931-9730 FAX: 800-637-2315 International Phone: 920-735-4554 International FAX: 920-735-4125

The XR-Aluma-Pro gun is available in air- or water-cooled versions with 15-, 25- or 35-foot (4.6, 7.6 or 10.6 m) cable lengths.

Fights fatigue. New lighter XR-Aluma-Pro guns reduce fatigue, improve output and are rugged to withstand industrial environments.

Balanced design. XR-Aluma-Pro guns are balanced and have a natural feel, so welders have improved joint access and can maintain proper gun angles, stick out and travel speeds.

Industrial-quality cable. Gun cable failure is expensive, not only in creating downtime, but also in the cost of repairing the gun. XR-Aluma-Pro guns have a durable cable covering and strain relief to withstand industrial environments and resist damage, reducing downtime and costs.

Aluminum-series-specific tension settings ensure smooth wire feeding performance with 4000 or 5000 series aluminum wires.

At 900 inches per minute, this gun will feed wire faster than any of its predecessors. (Dependent on feeder used.)

3-3/4 turn potentiometer provides better resolution when selecting the right wire speed for the job. The recessed WFS (wire feed speed) control offers durability yet is easy to use while wearing welding gloves.

2

Specifications (Subject to change without notice.)

Gas Diffusers

229670 1/8 in. tip recess (Standard) For heavy-duty FasTip contact tips. 230678 1/4 in. tip recess For heavy-duty FasTip contact tips. 230679 Flush tip For heavy-duty FasTip contact tips.

FasTip Contact Tips (25 per package)

Heavy-Duty (Aluminum Wire) 206186 .030 in. (0.8 mm) 206187 .035 in. (0.9 mm) 206188 .040 in. (1.0 mm) 206189 3/64 in. (1.2 mm) 206191 1/16 in. (1.6 mm) Tapered (Aluminum Wire) 209026 .035 in. (0.9 mm) 209027 .045 in. (1.2 mm) 209029 .052 in. (1.3 mm) 206030 1/16 in. (1.6 mm)

Nozzles

Screw-On Brass 199610 1/2 in. orifice, tapered 199611 3/4 in. orifice, straight 199612 3/4 in. orifice, straight HD 199613 5/8 in. orifice, tapered 199614 5/8 in. orifice, tapered HD Screw-On Copper 199615 1/2 in. orifice, tapered 199616 3/4 in. orifice, straight 199617 3/4 in. orifice, straight HD 198855 5/8 in. orifice, tapered 199618 5/8 in. orifice, tapered HD 207313 5/8 in. orifice, tapered 15/16 O.D. 209035 3/8 in. orifice, tapered 209036 1/2 in. orifice, tapered

Standard Consumables – FasTip™ Series

Optional Consumables – Centerfire™ SeriesInsulator 10012 4323R

Diffuser D-1AP (large) DS-1AP (small)

XR-Aluma-Pro™ Diffuser Conversion Kits for .035–1/16 inch aluminum 230669 For D-1AP diffuser 230670 For DS-1AP diffuser Diffuser kits must be used to convert to Centerfire™ Series consumables. Kit includes diffuser and head tube liners.

Aluminum-Specific T Series Contact Tips T-035AL .035 in. (0.9 mm) T-047AL .047 in. (1.2 mm) T-062AL 1/16 in. (1.6 mm)

Large Nozzles N-3414C Copper, 3/4 in. I.D., 1/4 in. tip recess N-3418B Brass, 3/4 in. I.D., 1/8 in. tip recess N-3414B Brass, 3/4 in. I.D., 1/4 in. tip recess N-5814C Copper, 5/8 in. I.D., 1/4 in. tip recess N-5818B Brass, 5/8 in. I.D., 1/8 in. tip recess N-5814B Brass, 5/8 in. I.D., 1/4 in. tip recess

Small Nozzles NS-5818B Brass, 5/8 in. I.D., 1/8 in. tip recess NS-1218B Brass, 1/2 in. I.D., 1/8 in. tip recess NS-1200B Brass, 1/2 in. I.D., flush tip NST-3818B Brass, 3/8 in. I.D., 1/8 in. tip recess

Insulator10012 Insulator

4323R

Large Nozzle (see chart)

“T” Series Tip(see chart)

DiffuserD-1AP (large)

3/4 in.I.D.

5/8 in.I.D.

Small Nozzle (see chart)

“T” Series Tip(see chart)

DiffuserDS-1AP (small)

5/8 in.I.D.

1/2 in.I.D.

Standard Replacement Consumables

Model

XR-Aluma-Pro™ (air-cooled)

XR-Aluma-Pro™ (water-cooled)

Wire Diameter Capacity

.030 – 1/16 in. (0.8 – 1.6 mm) aluminum wire

Wire kit 230708 required to run 1/16 in. (1.6 mm) wire

Wire Feed Speed

70 – 900 ipm (1.8 – 23 m/min.) dependent on control box or Millermatic® used

Net Weight (Gun only)

2.5 lb. (1.1 kg)

2.9 lb. (1.3 kg)

Dimensions

H: 5 in. (127 mm) W: 2.5. in (64 mm) D: 17 in. (432 mm)

Welding Current Rating

300 A at 100% duty cycle

400 A at 100% duty cycle

Aluminum Wire Size

.030 in. (0.8 mm)

.035 in. (0.9 mm)

.040 in. (1.0 mm)

3/64 in. (1.2 mm)

1/16 in. (1.6 mm)

FasTip Contact Tip (Qty. 25)

206186 .041 in. ID

206187 .047 in. ID

206188 .053 in. ID

206189 .061 in. ID

206191 .071 in. ID

Drive Rolls

227434

227434

227434

227434

227434

Cable Liners

229887 15 ft. (4.6 m)

229891 25 ft. (7.6 m)

232321 35 ft. (10.6 m)

Inlet Guides

227408

227408

227408

227408

230711

Liner for Short Air-Cooled Head Tube 4 in. (102 mm)

227161

227161

227161

230239

230239

Liner for Long Air- or Water-Cooled Head Tube 6 in. (152 mm)

229674

229674

229674

229431

229431

Idler Rolls

227439

227439

227439

227439

230710

3

Optional Head Tube Assemblies

45 Degree/4 Inch 255037 Air-cooled 255338 Water-cooled

45 Degree/6 Inch 255040 Air-cooled 231517 Water-cooled (standard on XR-Aluma-Pro™)

60 Degree/4 Inch 231519 Air-cooled (standard on XR-Aluma-Pro™) 255038 Water-cooled

60 Degree/6 Inch 231518 Air-cooled 255 041 Water-cooled

45 Degree/10 Inch Tight Access 258295 Air-cooled For hard-to-reach welds where a smaller nozzle and longer reach is needed.

180 Degree/4 Inch (standard on XR™-Pistol Pro) 255716 Air-cooled 255717 Water-cooled

180 Degree/6 Inch 258476 Air-cooled 258477 Water-cooled

180 Degree/8 Inch 255042 Air-cooled 255043 Water-cooled

45 Degree/6 Inch with Centerfire™ 246205 Water-cooled (standard on XR-Aluma-Pro™ Plus) 60 Degree/6 Inch with Centerfire™ 246301 Air-cooled

180 Degree/4 Inch with Centerfire™ (standard on XR™-Pistol Plus) 258474 Air-cooled 258475 Water-cooled

45 Degree/6 Inch Heavy-Duty 262206 Air-cooled 258293 Water-cooled 60 Degree/6 Inch Heavy-Duty 262207 Air-cooled 258294 Water-cooled

180 Degree/6 Inch Heavy-Duty 262208 Air-cooled 259535 Water-cooled

Heavy-Duty Head Tube Assemblies

For high-duty-cycle applications.

Flex Neck/10 Inch 267517 Air-cooled Ideal for hard-to-reach welds.

4

Liners for Optional Head Tube AssembliesFastip™ Liners (4-inch assemblies) 227161 .030–.040 in. (0.8–1.0 mm) 230239 3/64 and 1/16 in. (1.2 and 1.6 mm)

Fastip Liners (6-inch assemblies) 229674 .030–.040 in. (0.8–1.0 mm) 229431 3/64 and 1/16 in. (1.2 and 1.6 mm)

Fastip Liners (8-inch assemblies) M1434 .030–.040 in. (0.8–1.0 mm) M1435 3/64 and 1/16 in. (1.2 and 1.6 mm)

Bernard® Quik Tip™ Tight-Access Liners (10-inch assemblies) M1428 .030–.040 in. (0.8–1.0 mm) M1429 3/64 and 1/16 in. (1.2 and 1.6 mm)

Fastip Liners (6-inch heavy-duty water-cooled assemblies) M1425 .030–.040 in. (0.8–1.0 mm) M1426 3/64 and 1/16 in. (1.2 and 1.6 mm)

Phosphorous Bronze Liners (6-inch heavy-duty water-cooled assemblies) M1436 .030–1/16 in. (0.8–1.6 mm)

Universal Teflon® Liner Kit 262707 .030–.040 in. (0.8–1.0 mm) black liners 262705 3/64 and 1/16 in. (1.2 and 1.6 mm) yellow liners Includes five 14-inch liners and cutter. Liners can be cut to correct length for any pistol or gooseneck-style gun. Cutter provides a straight, clean cut to reduce shaving and feeding problems.

Teflon® Liner Cutter 258863

Genuine Miller® AccessoriesCable Cover M1681 15 ft. (4.6 m) M1682 25 ft. (7.6 m) M1683 35 ft. (10.6 m) Protects gun hose and cable assembly from wear and abrasion. Features full-length hook-and-loop closure for ease of maintenance or replacement.

50-Degree Curved Nozzle Kit-A 264064 Directly attaches to XR-Aluma-Pro™ or XR™-Pistol-Pro for access to confined weld joint areas. Used with .030 – 1/16 inch (0.8 – 1.6 mm) wire. Kit includes two of each size contact tip to accommodate all wire sizes, nozzle adapter kit and curved nozzle. Uses standard straight head tube liner.

Replacement Contact Tips for 50-Degree Curved Nozzle 148155 .030 and .035 in. (0.8 and 0.9 mm) wire 148154 .047 in. (1.2 mm) wire 148156 1/16 in. (1.6 mm) wire

50-Degree Curved Nozzle Insulator Kit 264066 Sleeve goes over center of curved nozzle to protect operator from heat. For use with 50-Degree Curved Nozzle Kit-A above.

1/16-inch (1.6 mm) Wire Kit 230708 Specially designed for 1/16-inch wire. Includes idler roll, head tube liner and inlet guide. Required when running 1/16-inch wires. Not included with standard XR-Aluma-Pro gun.

Hardwire Liner Kit for Steel and Stainless 198377 For 15, 25, or 35 ft. (4.6, 7.6 or 10.6 m) guns. Kit consists of gun head tube liner 233998 listed below and feed cable liner. Recommend using .030–.045 inch mild steel or stainless steel electrode wire. Note: .052- and 1/16-inch wires not recommended.

Phosphorous Bronze Liner 233999 Long head tube (air or water) 233998 Short head tube (air only) For use with hardwire liner kit 198377 above when used in XR-Aluma-Pro gun.

5

Wire Feeder and System Packages

XR-AlumaFeed® Suitcase® Wire Feeder 301567 Push-pull wire feeder designed for high-volume, high-production aluminum MIG welding where quality and consistency is a high priority. Features impact-resistant flame-retardant suitcase-style case. See literature DC/34.0.

AlumaFeed® Welding System 951834 Includes XR-AlumaFeed® Suitcase® push-pull wire feeder with drive rolls, AlumaPower™ 350 MPa synergic power source, and 25-foot (7.6 m) air-cooled XR-Aluma-Pro™ push-pull gun with contact tips, drive rolls and liners. Other system packages available. See literature DC/34.0.

AlumaFeed® MIGRunner™ Package 951833 Includes the same as 951834, plus MIGRunner cart and industrial MIG 4/0 kit with Dinse-style connector. Other system packages available. See literature DC/34.0.

Millermatic® 350P Aluminum/XR-Aluma-Pro™ System 951452 200(208)/230/460 V Includes Millermatic 350P Aluminum, 25-foot (7.6 m) XR-Aluma-Pro air-cooled push-pull gun, .035- and 3/64-inch FasTip™ contact tips, and .035- and 3/64-inch reversible U-groove drive rolls. (Standard MIG gun not included.) See literature DC/12.56.

6

XR-Aluma-Pro™ Gun

XR-Aluma-Pro™ Gun

PSA-2 115 / 24 VAC

Contactor

115 VAC

Miller® CV or CV/CC power source equipped with a 14-pin receptacle and

24 VAC power

Miller® CV or competitive CV power source with

115 VAC power

10-foot (3 m) 24 VACand contactor cord supplied with feeder

XR-AlumaFeed®

Suitcase®

10-foot (3 m) 24 VACand contactor cord supplied with feeder XR-AlumaFeed®

Suitcase®

Note: Cords and cables are supplied unless noted otherwise on drawings below. Refer to Owner’s Manual for complete installation instructions.

Typical Installations

CV Power Supply

Millermatic® 252, 255, 350P, 350P Aluminum Multimatic® 255

AlumaPower™ 350 MPa, 450 MPa Deltaweld® Series Invision™ Series XMT® Series (except VS model) Trailblazer® 325, 302 Air Pak™ Big Blue® Series (with 14-pin receptacle)

Note: XR-Aluma-Pro guns are not compatible with 74MPa Plus feeders.

Control

Direct Hook-Up

XR-AlumaFeed® Suitcase®

XR-Aluma-Pro™ Gun Hook-Up Recommendations

7

Notes

Equipment Stock No. Description Qty. Price

XR-Aluma-Pro™ Gun 301568 15 ft. (4.6 m) cable (Air-Cooled) 301569 25 ft. (7.6 m) cable 301570 35 ft. (10.6 m) cable

XR-Aluma-Pro™ Gun 301571 15 ft. (4.6 m) cable (Water-Cooled) 301572 25 ft. (7.6 m) cable 301573 35 ft. (10.6 m) cable

XR-AlumaFeed® Suitcase® 301567 Includes .035 and 3/64 in. drive rolls, and adds (See literature DC/34.0) Profile Pulse™, synergic control, trigger schedule select, lock capabilities and flowmeter

XR-AlumaFeed® Welding System 951834 Includes XR-AlumaFeed Suitcase feeder 301567, (Air-Cooled) AlumaPower™ 350 MPa power source, and (See literature DC/34.0) 25 ft. air-cooled XR-Aluma-Pro gun

XR-AlumaFeed® MIGRunner™ Package 951833 Includes the same as 951834, plus (Air-Cooled) MIGRunner cart and industrial MIG 4/0 kit (See literature DC/34.0) with Dinse-style connector

Millermatic® 350P Aluminum/ 951452 200(208)/230/460 V. True torque motor push-pull XR-Aluma-Pro System (Air-Cooled) system. Note: Millermatic 350P Aluminum (See literature DC/12.56) is only compatible with push-pull guns — not standard MIG guns

Consumables and Accessories

Consumables See page 2

Optional Head Tube Assemblies See page 3

Liners for Optional Head Tube See page 4 Assemblies

Cable Cover M1681 15 ft. (4.6 m) M1682 25 ft. (7.6 m) M1683 35 ft. (10.6 m)

50-Degree Curved Nozzle Kit-A 264064

Replacement Contact Tips for See page 4 Curved Nozzle

50-Degree Curved Nozzle Insulator Kit 264066 For use with 50-Degree Curved Nozzle Kit-A

1/16-Inch (1.6 mm) Wire Kit 230708 Required when running 1/16-inch wire

Hardwire Liner Kit for 198377 Steel and Stainless

Phosphorous Bronze Liners See page 4

Coolant Systems See literature AY/7.2

Date: Total Quoted Price:

Ordering Information

XR-Aluma-Pro guns require the following:

XR-AlumaFeed Suitcase (See at right.) Recommended Miller® 14-pin power source (See list below.)

OR Millermatic 252, 255, 350P, 350P Aluminum, or Multimatic 255 (See literature DC/12.49, DC/12.8, DC/12.51, DC/12.56, or DC/12.9.)

Important notes: XR-Aluma-Pro guns are not compatible with 74MPa Plus feeders.

XR-Control must be serial number KK309906 or higher to be used with products and descriptions mentioned in this literature. To confirm a product’s compatibility with older equipment, please contact the factory at 1-920-735-4505.

Recommended Power Sources AlumaPower™ MPa See literature DC/34.0 (For synergic use with AlumaFeed®)

XMT® 350 Series See literature DC/18.93

XMT® 450 Series See literature DC/18.94

Invision™ MPa See literature DC/23.6

Trailblazer® Series See literature ED/4.75 and ED/4.8

Big Blue® 800 Series See literature ED/14.0

Note: Other power sources may be used.

© 2020 Miller Electric Mfg. LLC

Distributed by: