XPT-C Optical Particle Analysis System · XPT-C Optical Particle Analysis System Principle: dynamic...

2
PS Prozesstechnik GmbH Neuhausstrasse 36 Tel.: *41 61 544 3003 CH-4057 Basel E-Mail: [email protected] XPT-C Optical Particle Analysis System Principle: particle suspension is pumped through the flow-through cell, directly from the process or from a sample. A CCD camera is continuously taking images which are analysed and displayed online. Results like particle size or number of particles of a certain shape can be displayed as trends or size distributions. Image sequences can be stored. Complete system: with stainless steel flow- through cell and housing, CCD camera, high power LED light source, computer and software for online image analysis. Applications: Particles, droplets or bubbles in liquid Measurement of size, shape and count Distinction between crystalline/amorphous particles High pressure / high temperature Counting product beads into vials Food, pharma, polymers, chemicals, oils... Measurement range: > 1 µm Image sampling rate: 30 images / sec analysed online Technical Data: Dimensions 300 x 300 x 120mm Resolution 1280 x 960 Pixel, 0.3 µm/Pixel or larger Power supply 115/230V, rechargeable battery optional Partikelmesstechnik mit dynamischer Bildanalyse particle size measurement by dynamic image analysis

Transcript of XPT-C Optical Particle Analysis System · XPT-C Optical Particle Analysis System Principle: dynamic...

Page 1: XPT-C Optical Particle Analysis System · XPT-C Optical Particle Analysis System Principle: dynamic image analysis according to ISO 13322-2. Particle suspension is pumped through

PS Prozesstechnik GmbH

Neuhausstrasse 36 Tel.: *41 61 544 3003CH-4057 Basel E-Mail: [email protected]

XPT-C Optical Particle Analysis System

Principle: particle suspension is pumpedthrough the flow-through cell, directly from theprocess or from a sample. A CCD camera iscontinuously taking images which are analysedand displayed online. Results like particle sizeor number of particles of a certain shape canbe displayed as trends or size distributions.Image sequences can be stored.

Complete system: with stainless steel flow-through cell and housing, CCD camera, highpower LED light source, computer andsoftware for online image analysis.

Applications:

• Particles, droplets or bubbles in liquid

• Measurement of size, shape and count

• Distinction between crystalline/amorphous particles

• High pressure / high temperature

• Counting product beads into vials

• Food, pharma, polymers, chemicals, oils...

Measurement range: > 1 µm

Image sampling rate: 30 images / sec analysed online

Technical Data:

• Dimensions 300 x 300 x 120mm

• Resolution 1280 x 960 Pixel, 0.3 µm/Pixel or larger

• Power supply 115/230V, rechargeable battery optional

Partikelmesstechnik mit dynamischer Bildanalyse

particle size measurement by dynamic image analysis

Page 2: XPT-C Optical Particle Analysis System · XPT-C Optical Particle Analysis System Principle: dynamic image analysis according to ISO 13322-2. Particle suspension is pumped through

Particle size, shape and count – online and realtime

Software:

• All options are measured, all reports are done after the measruement

• Particle size distribution, scatter-plot, trends over time

• Diameter, length, shape factors

• Optional simultaneous storage of the measurement as movie

• Analog output with measurement results for online measurement

• Analysis of live images or stored images or movies

particle size measurement by dynamic image analysis

particle size measurement by dynamic image analysis