xpedx, an International Paper Company © 2010. Reproduction, redis-tribution, and/or use within other electronic or print publications, in whole or part, is strictly prohibited without the express written permission of xpedx. xpedx is a registered trademark of Inter-national Paper Company. All other trademarks are property of their respective owners and are used with permission.

xpedx has the packaging expertise to create innovative packaging systems for manufacturers across every industry.

As the largest U.S. distributor of packaging equipment and supplies, xpedx is the single-source provider

of choice for manufacturers seeking to reduce total procurement costs, optimize their line, improve a

package design or outsource an opportunity that is not a core competency, like kitting and fulfillment.

xpedx is aligned with the leading manufacturers of packaging equipment, providing local sales and

service, as well as the supplies and expertise packagers need to manage their business.

Workflow Automation

For a healthy bottom line, xpedx looks at your total operation.

From packaging concept to daily production enhancements,

we improve a customer’s cost structure through better uti-

lization of equipment. Whether you need a multi-million-

dollar fully integrated system, or a single free-standing

wrapper, xpedx has the equipment you need to meet

your production goals. We start with a blank slate,

listen to your needs, then collaborate with

equipment and substrate manufacturers to

provide concept-to-shelf efficiencies.

36'

Baldor VM3538

Motor 56C

1/2 HPAPS 73000032

NA

MEP

LAT

E

124213-F4B-SC-115

124213-F4B-SC-115

5'-0

" 55"

EW

GRAVI

TYCO

NVEYO

R

PC-1

1

6'-0

" 54"

EW

POW

ERED

CONVE

YOR

RVS

FLO

WIN

FEED

#1

6'-0

" 54"

EW

POW

ERED

CONVE

YOR

RVS

FLO

WEX

IT #

1

89" D

IA T

URNTA

BLE

TSD ENCLOSURE

PC-7

PC-3

0

MID

WRA

P TS

D

60 X

36

ENCL

OSU

RE

PC-1

0

CL

8'-10"

12'-2"

25'-7"

2'-10"

Our Equipment Commitment

The xpedx National Equipment Center (NEC) is a central resource

for 100-plus xpedx locations that sell packaging equipment.

Team members coordinate shipment and installation, over-

see parts fulfillment and manage preventive maintenance

programs. Manufacturer-trained service technicians

reside in local markets, but are dispatched from the

NEC to ensure efficient and responsive customer

service.

To learn more, contact your local xpedx or

the NEC at 877 489-3511.

• Indexes, opens, seals, and tears off bags at rates of over 100 cycles per minute

• Bags virtually any product, including fasteners, hardware, injection molded parts, kits, crafts, foods, medical devices, and more

• Runs bags produced from LDPE, LLDPE, HDPE, foil, polypropylene, Tyvek® and various barrier films

• The Ti1000 Advanced Poly inline thermal transfer printer (as shown) makes a perfect companion for printing text, barcodes, graphics or logos directly to the surface of the bags

T-1000 Advanced Poly-Bagger ™

www.advancedpoly.com

• Simple to operate state-of-the-art components pro-vide accurate seal time, temperature, and pressure settings

• Tooling changeover takes a matter of seconds and is inexpensive with laser cut hardwood or precision-machined anodized aluminum sealing fixtures

• Achieve high output of up to 15 cycles per minute• Rotary design provides easily accessible operator

workstations• Large sealing fixture size maximizes production with

multiple “up” capability

Visual Packaging Rotary ESDS6C-1822

www.visualpackaging.com

• Stationary oven with safety guard for faster cycling• Patented Spirad® instant heater elements• Adjustable pre-heat, heat, and cool down package

time functions• Pneumatic film frame drive with independently ad-

justable up and down speeds• “Electro Pulse” film cut-off• Spindle film roll holder and adjustable oven height• Also available: variable speed turbine, positive dis-

placement vacuum, and touch screen control panel

Ampak® Master MP-3036 Skin Packaging System

www.ampakco.com

• Heavy-duty construction designed with scratch-resistant surface to prevent corrosion

• Handles “bull’s eye” and side seal enclosures• Oversized for maximum film width of up to 89”• Allen Bradley® programmable logic controller with ARPAC

standard operator interface• Digital controls for fast and accurate setup• Integrated dual stage shrink tunnel• Top and bottom film racks & side smoothing rollers• Quick and easy changeover of different product sizes• Speeds from 3 to 20 bundles per minute

(depending on product length/height)

ARPAC 105 Shrink Bundler

www.arpac.com

• Compact design• Stainless steel construction• Variable speed (up to 7200 CPH depending on

carton size, etc.)• Glue or tuck style closure• Broad carton size range• Simple carton size change• Optional semi-automatic loading

ECONOSEAL® Pegasus Cartoner

www.econoseal.com

• Provides jam-free operation while dealing with widely varying quality and size tolerances in the case blanks

• Compact footprint• It’s easy to use – anyone can run a C-300• Ergonomic design allows for easy loading of blanks• Adjustment wheels, counters, and “help” chart for

fast set-up• Powered infeed magazine

Lantech® C-300 Case Erector

www.lantech.com

• Automatically form, fold, and bottom seal RSC corrugated boxes

• Accommodates a variety of corrugated cases from double wall to recycled material

• Ability to form up to 20 cases per minute• Chain-lug drive• Powered hopper• Pneumatic tuckers• Allen Bradley® PLC• Quick changeover• Heavy-duty steel construction• American craftsmanship

Little David CF-50T Case Former

www.loveshaw.com

• Designed to expand, contract, and move easily• Self-tracking, gravity skate wheel conveyor• Available in 14”, 18”, and 24” widths• 226 lb. per lineal foot capacity• Engineered to handle multi-sized cartons in low

to medium volume applications• All steel construction with adjustable inner legs

(28” to 44” elevation)• Heavy-duty 5” x 1.5” swivel casters with steel brakes

and couplers standard• Retractable package stop also serves as an

ergonomic handle

NESTAFLEX® 226 Gravity Skate Wheel Conveyor

www.flexmh.com

• Energy efficient way to transport lightweight, flat bottom products with the capability of minimal back pressure accumulation

• Quiet operation and easy maintenance• Minimum back pressure accumulation • 1.9 inch diameter x 16 ga. galvanized rollers • Reversible with constant and variable speeds from

25 to 120 feet per minute• 27 between frame widths available from 13” to 39” • Single drive can power multiple straight, curve and

spur sections

Omni Metalcraft Corp. LSDS1.9 Lineshaft Driven Conveyor

www.omni.com

• The Slip-Torque conveyor is based on polished stainless steel shafts individually powered by flexible belts on a line shaft or by a continuous chain

• These stainless steel shafts are covered with segment-ed, loose-fit rollers, which become the conveyor surface

• It is the weight of the product being conveyed combined with the coefficient of friction between the shafts and the inside diameter of the rollers that provides the driving force

• As the weight of the product increases, there is a corre-sponding increase in the driving force supplied

• As products stop, the segmented rollers beneath them also stop, creating very low back pressure accumulation to reduce or eliminate product damage

Shuttleworth® Slip-Torque® System

www.shuttleworth.com

• Utilizes a product stop and low back pressure to synchronize the release of the product to a belted infeed or a flighted infeed of a wrapper

• The combination of the low pressure queue area, the speed change, and the product stop, makes for jam free operation

• Gated infeeds operate at 20 to 80 products per minute

• The high speed infeed will reach rates of 120 prod-ucts per minute

• The entire SmartFeed® line may be integrated with new OEM machinery or to an existing machine in the field

Shuttleworth® SmartFeed® Conveyor

www.shuttleworth.com

• Intelligent system controller provides the flexibility to be used in a stand-alone feeder/dispenser or integrated into other systems

• Stainless steel enclosure• Three single-knob adjustment points for faster

make-ready and quick product changeover• Optional vacuum assist helps with coated or other

slick stocks• I-Quipped keypad/display interface enables easy

set-up, operation, and monitoring of the feeder• Ability to handle a wide variety of products, from

single sheets to thick magazines

Streamfeeder® ST-1250 Feeder

www.streamfeeder.com

• Up to 300 products per minute• Ideal for Front, Back, Wrap and 3-Panel applications• PLC control packages available• Stepper and Servo drive packages available• Q60 labeling heads with dispense speeds up to

2,200 in./min.• Heavy-duty stainless steel/aluminum design with

precision sealed bearings and pivoting peel plate• Redundant labeling heads for continuous non-stop

operation• Optional features include product alignment devices,

vision systems, barcode scanners and coders

Quadrel In-Line Cabinet Base Labeling System

www.quadrel.com

• Automatic time and date coding• Disposable ink container• Two individual user-settable expiration date codes• Self-contained steel housing• Automatic pallet count and shift code changes• Alpha-numeric incrementing• Heavy-duty mounting hardware• Easy horizontal and vertical adjustments• Low ink warning light• User-friendly software

Little David MicroJet Inkjet Printers

www.loveshaw.com

• Palletize at the point of production• Pre-assembled for quick startup• Multiple pallet patterns available• Instantaneous tool changing• Handles case weights up to 45 lbs.• 36” scissors lift for maximum height• 86” maximum load height• Palletizing rate of up to 15 cases per minute• Utilizes ABB Pickmaster 5 software and Rockwell

MicroLogix 1500 PLC• Uses manual forklifts or AGV’s – integrates with AGV

for transport of full pallets to stretch wrapper

QComp Compact Lean Palletizer

www.qcomptech.com

• Heavy-duty construction with welded tubular frame, linear shafts, factory sealed bearings, rugged casters and adjustable height legs

• Allen-Bradley® MicroLogix PLC• Variable speed conveyors with soft start control• Safety interlocked guarding• Worry-free rewind system and unique trim takeaway

with independent motor and closed-loop operation to accommodate the lightest film gauges and narrow film tails – reducing your film requirement

• Quick product changeover with simple adjustments to marked scale positions

ARPAC L18 L-Bar Sealer

www.arpac.com

• Compact welded steel frame with durable powder coat finish to prevent corrosion

• Viewing window on operator side with illuminated shrink chamber for product inspection

• Double insulated shrink chamber for maximum energy efficiency and minimal heat loss

• Convection style heating for consistent shrink wrapping• Variable upper and lower air velocity controls• Top and bottom Calrod® heating elements• Variable speed conveyor• Thermocouple for precise temperature control

ARPAC Vision Series Shrink Tunnel

www.arpac.com

• Rugged, long life design with all-welded 1/4” cold rolled steel frame

• Unique film cradle for quick, easy film adjustment and changeover

• Positive actuation of seal system• Smooth seal head return with return cylinder• Film inverter• Power film unwind (optional)• Locking 3” swivel casters• Convenient parts drawer in base leg with instruction

manual

EASTEY® EM28TK Hot Knife Sealer

www.eastey.com

• Positive shrinking of all products assured with 4-directional air flow

• Quiet, variable speed conveyor with 1.5” on-center roller spacing

• Stainless steel mesh conveyor or “live” rollers (“dead” rollers available upon request)

• Three heater bank sizes available• Sealed bearings on drive and idler shafts• Available in 220 or 480 voltage• Chain drive powered by an industrial gear motor• Solid state temperature controller with over-

temperature protection• Bases supplied with locking casters and leveling adjusters• Removable return air screen• Delayed cool down

EASTEY® ET2012 Shrink Tunnel

www.eastey.com

• Heavy-duty construction, casters, and levelers• Acc-U-Seal wire temperature control and Acc-U-Temp

digital tunnel temperature control• Adjustable seal arm height, seal pads, and film cradle• Dual magnets with adjustable pressure and dwell time• Film perforator with individually adjustable collars• Synchronized power take away and package centering

alignment system• Adjustable heat tunnel conveyor belt for bottom shrink

control• Cast aluminum seal head with film clamps• Large 15” x 20” sealing area• Built-in automatic tunnel cool down

Heat Seal® HDS-115 Shrink System

www.heatsealco.com

• Self-tracking belts handle products at up to 100 ft. per minute

• Expanded sealing capacity for larger package sizes• Operates faster than automatic L-bar sealers and

requires less film• Infeed and seal area guard covers provide safety

and easy operator access• Color HMI touch screen provides intuitive, operator-

friendly product setups in three languages• Crank adjustments provide easy, tool-less package

size changeovers• Easy load film cradle and large film selvage cone

Conflex® FUSION Wrapper

www.sealedair.com

• Conveyor fed automatic operation with positive film feed

• 15” x 21” seal area with a maximum product height of 5.5”

• Up to 35 packages per minute (standard) and 45 packages per minute (with high speed gearing) depending on product and application

• Designed for applications that require a positive film feed to draw product into the seal area, such as flexible products that do not have sufficient stiffness to advance the film and stacked products such as sheets of paper

Shanklin® A-26A L-Sealer

www.sealedair.com

• Fully automatic operation – runs equally well at both high and low speeds

• Handles irregular shapes with numerous features and options allowing customization to application

• Produces 50-75 packages per minute (depending on application)

• Easy-to-use programmable controller with user-friendly touch-screen control panel with self-diagnostics for ease of operation

• Flighted lug infeed conveyor that facilitates higher operating speeds than other Shanklin models

Shanklin® F-5A FloWrap Shrink Wrapper

www.sealedair.com

• Powerful hot air system and 12” high tunnel opening produces excellent shrinks on medium and high profile products

• Variable conveyor speed from 15 to 120 ft. per minute• Conveyor height of 28” to 40”• Ruggedly designed for maximum reliability• Main air velocity in the tunnel is fully adjustable, and the

velocity of the top air jets is independently adjustable to facilitate running open top boxes and trays

Shanklin® T-7H Shrink Tunnel

www.sealedair.com

• On-demand case presentation• Patented hands-free case indexing system• Easy load case magazine• Heavy-duty welded tubular steel framework and stainless

steel contact parts• Quick no-tool changeover• 3M™ AccuGlide™ II Taping Head and Allen Bradley® PLC• Right or left hand execution• Case discharge elevation from 21” to 28” (case

dependent)

Combi Ergopack® Hand Packing Station

www.combi.com

• Capable of up to 50 straps per minute• PLC controlled with diagnostics• Electronic reel brake• Electronic tensioning• Movable magnetic pendant for convenient control• Long life heater blade• Servo-motor technology• Auto strap loading, auto re-feed, loop ejector, end of

strap eject• Fold-open roller tops for easy access• Power saving system – motor runs only during cycle

Polychem® SV-5000 Automatic Strapper

www.polychem.com

• 1.5 seconds per strapping cycle – 40 straps per minute• Easy strap loading/threading system free of complicated

devices• Permanently lubricated mechanisms for reliability and

maintenance-free operation• Heater is ready to operate and provide a secure seal joint

in less than 25 seconds after initial power-up• Programmable microprocessor constantly monitors critical

functions and displays any irregularities• Variable tension capability of up to 80kg

StraPack® RQ-8 Automatic Strapper

www.strapack.com

• The world’s most popular stretch wrapper from the inventors of stretch wrapping

• Unique turntable system supports heavy loads and stands up to the shock of loading

• Film delivery system delivers consistent wrap force and maintains constant pre-stretch

• It’s intuitive, easy, and safe – anybody can run the Q-300

• Deliver the lowest total cost of ownership of any semi-automatic stretch wrapper

• Exclusive Pallet-Grip® option locks your load to the pallet, reducing load shifting and product damage

Lantech® Q-300 Stretch Wrapper

www.lantech.com

• Simple Automation™ – low cost automation from the inventors of stretch wrapping

• Q-300XT keeps your driver on the fork truck – no getting on and off the fork truck

• The XT cut and clamp automatically attaches and cuts the film

• Exclusive Click-n-Go™ Remote Control option starts the machine at the touch of a button

• Exclusive Pallet-Grip® option locks your load to the pallet, reducing load shifting and product damage

Lantech® Q-300XT Stretch Wrapper

www.lantech.com

• High performance automatic turntable stretch wrapper from the inventors of stretch wrapping

• Small footprint is ideal for stand alone or system use• Exclusive Lan-Logix™ Controls interface is easy to use

and boosts productivity by eliminating the need for costly software and hardware to make minor program changes

• Exclusive Load-Seeking™ Clamp option is more reliable at capturing the beginning film tail and more forgiving in load placement

• The Load-Seeking™ Clamp option is better at load containment because the clamp moves to the load

• Exclusive Pallet-Grip® option locks your load to the pallet, reducing load shifting and product damage

Lantech® Q-1000 Stretch Wrapper

www.lantech.com

• Simple Automation™ – low cost automation from the inventors of stretch wrapping

• No getting on and off the fork truck – no wasted operator time

• The XT cut and clamp automatically attaches and cuts the film

• Great solution for applications with light, heavy, tall or unstable loads

• Exclusive Pallet-Grip® feature locks your load to the pallet, reducing load shifting and product damage

• Exclusive Click-n-Go™ Remote Control option starts the machine at the touch of a button

Lantech® S-300XT Stretch Wrapper

www.lantech.com

• Fully automatic, all-in-one unit for a variety of top and bottom case sealing operations

• 3M™ AccuGlide™ Taping Head 2+ ensures that even lightweight cartons are securely and carefully sealed

• Production rates of up to 27 boxes per minute • Height and width can easily be adjusted for a wide

range of RSCs• Dual top flap compression rollers• Adjustable stainless steel minor flap guide• Graduated inner legs for convenient, precise bed

height adjustment (23” to 28.125” without casters)

3M-Matic™ Automatic Adjustable Case Sealer 120af

www.3m.com

• Side belt adjustable case sealer centers and stabilizes a variety of RSC heights

• Dual masts and dual crossbars for taping head stability• Twin gear motor drives for dependability with cases up

to 85 lbs.• Easy height and width adjustments for a wide range of

RSC sizes• Top flap compression rollers to close flaps for an im-

proved seal• 3M™ AccuGlide™ Taping Head 3 for low impact sealing

and higher production at up to 40 cases per minute

3M-Matic™ Side Belt Adjustable Case Sealer 800a

www.3m.com

• Air pressure and flow controls optimally positioned to reduce unnecessary adjustments, improve ease of maintenance access, and increase floor layout options

• Consistent tape length of 4.5” helps prevent waste• Package contact plate activates tape application

easily and safely• Heavy-duty one-piece frame for durability and stability• Oil-less operation to reduce maintenance

3M-Matic™ L-Clip Applicator S-867

www.3m.com

• Heavy-duty stainless steel design with continuous TIG welding for durability

• Anti-microbial/Easy-Clean design with maximized water shedding to prevent bacterial growth

• Minimal overlapping joints to meet AMI standards for wash down environments

• Quick change from 2” to 3” tape in the field• Lever action to lift/remove self-tracking endless belts• Adjustable height levelers with self-sealing insert to

prevent water migration

Little David LD-Xss Case Sealer

www.3m.com

• Tapes boxes from 4.5” to 24” in height• Plug in operation with minimal operator training

required• Sealed drive system• CaseLocker ST™ tape cartridge requires no

lubrication• Self-centering continuous belt at speeds of up

to 72’ per minute• Narrow profile “T-rail” table• Bottom major flap folding bars and top

squeezer rollers

Little David SP-304 Case Sealer

www.loveshaw.com

xpedx, an International Paper Company © 2010. Reproduction, redistribution, and/or use within other electronic or print publications, in whole or part, is strictly prohibited without the express written permission of xpedx. xpedx is a registered trademark of International Paper Company. All other trademarks are property of their respective owners and are used with permission.

xpedx.com