XOMAX XM-DTSBN921 Bedienungsanleitung · xomax.de, view them on your mobile devices and print them...

XM-2DTSBN6220BT

ENGLISH

XOMAX

User's Manual

2 XM-2DTSBN6220BTXOMAX

Thank you for purchasing one of our XOMAX products! We appreciate your confi-dence. Enjoy your brand new multimedia unit!

Please read the following manual carefully before you install and use the unit. Please save this manual in case you will need to clarify further possible ques-tions regarding installation and usage of our product.

We are constantly trying to keep our online-library of user's manuals for our products up-to-date. In case you miss some information or if something should be unclear, please visit our homepage http://xomax.de/download for a current version of user's manual or contact our customer service.

i

Version 1.1Last update 01.07.2016

Manual's version

We appreciate our environment, so to keep it safe and clean, we do not print our manuals on paper but provide our products with manuals in digital version created in *.pdf format.

You can find and download them anytime on our homepage www.xomax.de, view them on your mobile devices and print them for yourself if needed.

Please note: Any alternations and changes of technical data or/and design due to technical update of some models need no advertisement.

XOMAXXM-2DTSBN6220BT

http://xomax.de/download.html


ENThema: Index

Safety instructions and precau-tions 6

Handling the CDs and DVDs ............. 7Notes ......................................... 7Cleaning the discs ........................ 7

Specifications ................................. 8Package content ............................. 9Operating elements of the unit ........10Operating elements .......................10Remote control ..............................12

Installation 14Installation notes ...........................14Before the installation ....................14

Connection schedule – ISO plug 16

ISO plug configuration 17Socket A (power supply) .................17Socket B (loud speakers) ................17

ISO cable connections 18ISO cable .....................................18Please note ...................................18

Connection schedule – Cinch multicore 19

ISO cable connections 20

Startup operations 21Usage of the remote control ............21Replacement of the battery .............21Unit on/off ....................................22Insert a microSD card ....................22Insert a USB flash drive ..................22Insert a CD/DVD ...........................22Factory settings .............................22Start the navigation .......................22

Basic functions 23Main menu ...................................23Scroll the pages ............................23Scroll the lists ...............................23Volume ........................................23Mute ............................................23Back to the current mode ...............23

Settings 24Time Setting .................................24Sound setting ...............................24

Equalizer ...................................24Preset Equalizer .........................25Fader und Balance ......................25

Wallpaper .....................................26SWC setting ..................................26Factory Settings ............................26Calibration ....................................27Language setting ...........................27Brightness ....................................27

Set the GPS-Path 27

Index


ENThema: Index

Storage media 29Supported media ...........................29Supported formats .........................29

Radio mode 30Radio mode ..................................30Automatic frequency scan ...............30Store the found stations .................30Switch AM/FM ...............................30LOC signal sensitivity .....................31

AF funktion (Alternative Frequency) ......31TA funktion (Traffic Announcement) .......31PTY Funktion (Programme Type) .........31

USB-, SD- and Disc- modes 32Start the playback mode.................32Files list .......................................32Start the playback .........................32

Music playback mode 33Play/Pause ....................................33Previous / next track ......................33FF / Rewind ..................................33Repeat track .................................33Random playback ..........................33ID3 tag (Title, Interpretor) ..............33

Video playback 34Display the OSD Video menu ...........34Start DVD playback........................34Play/Pause ....................................34Previous / next track ......................34FF / Rewind ..................................34Select track directly (GOTO) ............34

Repeat track .................................34Random playback ..........................34Switch the subtitles .......................35Switch the soundtracks ..................35Call up the DVD menu ....................35DVD video zoom in / out .................35

Picture viewer mode 36Open the picture ...........................36Display the options ........................36Pause / resume the slide show ........36Previous / next picture ...................36Select file directly (GOTO) ..............36Zoom in / out ................................36

Bluetooth connection 37Start Bluetooth mode .....................37Pairing the unit with an external de-vice .............................................37Common information .....................37Make a call ...................................37Take a call ....................................38End / reject the call .......................38Phone book...................................38

Load the data from the external phone .......................................38Dial the number from the book .....38Search within the book ................38

Phone protocol ..............................39

Bluetooth music 39Common information .....................39Start Bluetooth music ....................39


ENThema: Index

Rear view camera (optional) 40

Common information .....................40Connection ...................................40Start the rear view camera mode .....40

AV-IN Mode 41Common information .....................41Start the AUX mode .......................41

Common solutions 42

Disposal / recycling information 44

Disposal of an old unit / battery .......44


ENThema: Safety instructions and precautions

Safety instructions and precautions

! Handling by stop only

To avoid any accidents please don't handle the unit while you driving. Please stop and park the vehicle at safety place and handle the unit casually.

! Installation

Please read the following manual carefully before you install the unit. We recommend you to let the technician install the unit in your vehicle.

! Regular loudness

Please set the loudness of the unit to the appropriate level so you were still able to hear exterior noises especially traffic warning signals. Furthermore the higher loudness level can damage your hearing organs.

! Repair of the unit

Do not open the unit. Do not try to repair the unit by yourself due to any emerging technical problems. While opening the unit by yourself exists the danger to be electrocuted. Do not use the unit any further since you detect any kind of technical problems. Leave all the repair opera-

tions to professional technicians.

Due to flawed warranty seal the warranty becomes invalid.

! Power supply

Use the unit connected only to 12 Volt on-board power supply. The minus (-) should be connected with the ground (GND) (negative).

Due to the wrong grounding exists the danger of fire. In case of doubt please consult with professional technicians.

! Replacement of fuses

While replacing the fuse please make sure that the new fuse has the same properties as the old one, especially the amperage.

! Overheating

Do not occlude the vent holes to avoid the heat generation and accumulation in the unit. Otherwise exists the danger of fire.

! Regular temperature

Please make sure that the temperature inside the vehicle amounts to not more than +60 C. If it's too hot inside the vehicle, do not turn the unit on until the inside temperature of the cabin descends.

! Cleaning of the unit

!



Please keep the unit clean and remove the dust from it regularly. Please use for that a soft and dry cleaning rag. Major soilings can be removed carefully with the wet cleaning rag. Do not use any chemical or alcohol-containing detergents to avoid the damage of the unit's varnish.

! Handling the touchscreen

Do not press the touch keys or other symbols too hard – it may lead to image distortions, unit malfunctions and touchscreen damages.

Do not use any sharp articles to use the touchscreen. Please handle the touchscreen with your finger or with the appropriate stylus.

! Moisture

To avoid the danger of fire or the electric shock do not put the unit in to the moist environment (e.g. adverse weather conditions, inappropriate wet cleaning etc.)

Handling the CDs and DVDs

Notes

» Soilings, scratches, dust can impair the playback and damage optical lenses.

» Do not label CDs/DVDs with an inappropriate stickers and markers.

» Do not ever bend the disc.

» Store the discs in an appropriate sleeves to avoid damages of the media.

» Do not expose discs to direct sunlight.

» Do not touch the mirror surface of the disc to avoid the soilings such as fingerprints.

Cleaning the discs

Do not use any aggressive chemical or alcohol-containing detergents for cleaning of the optical media.

Please use a clean and fine cleaning rag to clean the surface of the disc. Remove the soilings and the dust carefully from the center outwards.



Any alternations and changes of technical data or/and design due to technical update of some mo-dels need no advertisement. Errors expected.

Specifications

Allgemeine DatenOperating voltage ........................... 12V DC

Fuse ................................................... 15 A

Button illumination color ....................... blue

Installation size .............. 2DIN (Doppel DIN)

AudioOutput power ........................... 4 x 60 Watt

Loudspeaker impedance ..................... 4 Ohm

TFT LCD BildschirmDiagonal ........................ 6,2 Zoll (ca.16 cm)

Image ratio ........................ 16:9 widescreen

Resolution ........................... 800 x 480 Pixel

Typ .................. TFT LCD Touchscreen Monitor

FM-Radio ReceiverFrequency range .................. 87.5 - 108 MHz

AM-Radio ReceiverFrequency range .................. 522 - 1620 KHz

USB-portPlug type ........................................... Typ A

Max. supported volume ..................... 128 GB

Filesystem ............................... exFAT, FAT32

SD-card slotPlug type ..... MicroSD, MicroSDHC, MicroSDXC

Max. supported volume ..................... 128 GB

Filesystem ............................... exFAT, FAT32

BluetoothVersion ..................................... 2.0 Class 2

Profile ............................ Freisprechen, A2DP

Frequency ........................ 2.4GHz Spektrum

Navigation

Maps .............................................. Europa



Package content

Please check the accessories on completeness:

A radio

B remote control and Stylus

C 2DIN cage and trim

D installation manual

E GPS-aerial

F Navigation software on the micro SD

memory card

G ISO cable

H Mounting material

A C

FED

G

H

B

The images serve as example. Optically the may vary from the original.

Please note: the package content may vary due to technical updates.i



Operating elements of the unit

Operating elements

1 PWR / VOL / MENU Power/volume/main menu Press this button will turn on power, during working longer press this button will turn offpower.

On any mode, shortly press will return main menu.

2 GPS navigation mode Switches to navigation mode.

3 MUTE Press this button to turn off volume output, press it again to restore the previous volume level.

Long press MUTE button to turn off TFT screen, and short press it so that TFT screen shall be re-lit.

4 SD CARD microSD card slot The indicated with "SD" card slot is reserved for the user's own micro SD-/SDHC- memory cards (in exFat or Fat32 file system, 128GB max.) with the customer's personal multimedia content such as music, pictures, videos.

5 USB USB slot Insert USB removable device so as to read audio/video files.

Warning: You can only use either front or rear USB at a time. Never connect both front and rear USB at the same time! This could cause malfunctions.



6 AUX AUX To input external audio.

Warning: You can only use either front or rear AUX at a time. Never connect both front and rear AUX at the same time.

7 RST reset Deletes all the customer's adjustments and sets the unit back to factory settings.

8 IR Infrared

9 MIC bluetooth microphone Is used during hand-free phone calling via Bluetooth. The microphone should not be blocked to achieve the best possible sound quality.

A MAP GPS MicroSD-Slot Insert map card to read navigation map data.

B 1 eject When there is a disc inside the unit, press the button can eject the disc.

C FM/AM Radio band switch Press the button to switch to the radio mode. In radio mode, band is switched when the button is pressed.



Remote control

1. PWR Press once to switch on, press again to switch off.

2. MUTE Press once to turn off audio output, press again to resume volume level.

3. NAVI Press it to enter to exit the navigation.

4. SOURCE Press this button to choose audio sources.

5. EQ Press this button to choose POP, ROCK, CLASSIC, EQ off.

6. SEEK-/8 and SEEK+/7

In normal playback MP3, USB, SD songs, press this button to previous song or next song.

7. VOL- / VOL+ Press this button to increase or decrease volume level.

8. SEL Press this button to choose sound feature.

9. LOUD Press this button to startup LOUD function.

10. BAND In radio mode, press this button to choose band.In VCD, DVD mode, press this button to choose AUTO, PAL or NTSC system.

11. LOC/RDM In radio mode, press this button to switch between local and direction, In VCD, CD mode, press this key to randomly play.

12. • Press this button to stop playing.

13. < Press this button to switch between play and pause, In stop mode, press this button to play.

14. ST In radio mode, press this button to choose stereo or mono station. In audio mode, it can help stop button to programmed play.

15. 0-9 Press this button to choose desired song, section, preset stations. Decimal numbers, for example the 19th song, press 10+ and 9 button.

16. AMS/RPT In radio mode, press this button to browse stored stations.



In audio mode, press this button to play repeatedly.

17. TITLE In DVD mode, press this button to play back to the top menu of disc.

18. AUDIO In DVD mode, press this button to switch language of dialogue. In VCD mode, press this button to choose left track, right track,and stereo.

19. GOTO In DVD mode, press this button, you can define playing time.

20. SUB-T In DVD mode, press this button to switch language of subtitle.

21. PBC In VCD mode, press this button to display all song menus, work with number button to choose songs.

22. Š > ‰ ‹ When playing MP3, USB, SD returns to song menu, up, down selections can be up ‰ button or down ‹ key to select up and down, select and press ENTER key to confirm. The selected tracks can be played. Press the left or right arrow keys to Š or > key, can be on the next page function operation.

23. SLOW In audio mode, press this button to slow backward and slow forward.

24. ANGLE In DVD mode, press this button to change play angle.

25. SETUP In audio mode, press this button to choose different set items.

26. OSD Press this button to display

the title chapter and the left time.

27. ZOOM In DVD/VCD mode, press this button to ZOOM in/out.

28. MENU Press button to back to the main menu.


ENThema: Installation

Installation

Installation notes

Here you can find relevant installation notes and common information.

Before the installation

WARNING!

Please read the following manual care-fully before you install the unit.

Damages caused due to an inapprop-riate installation will not be covered by warranty.

If you do not want to risk your warranty entitlement, please let the technician install the unit in your vehicle.

» To avoid a short circuit please disconnect the vehicle battery before the installation. To do it properly please read the manual of your vehicle.

The detailed installation manual you can find on our homepage www.xomax.de.

The printed version of a common installation manual you can find in the package.

i

!

» Make sure that your vehicle is equipped with a car radio slot of required size (2DIN)

» As may be the case you will need a suitable faceplate, adapter or other accessories. These could be provided from your local specialist supplier.

» The connection cables may not be cutted or short-circuited. Otherwise the warranty becomes invalid.

» Before the installation please make sure that your vehicle has the 12 Volt on-board power supply.

» The minus (-) should be connected with the ground (GND) (negative).

» Please tag the polarity of the avai-lable speakers before you disconnect the vehicle battery.

» A proper grounding of the unit's housing requires a clean ground connection. Thus the grounding area should be rust-, stain- and dust-free.

» Please ground the cable separately from other heavy current devices such as an amplifier etc.

» Please ensure that the colored cables are connected according to the wiring diagram. The wrong wiring may lead to malfunctions or even damages of the electric elements of the vehicle.

» Please note that the connection cables of this unit and of the other devices may have the same purpose but the different color. For this reason while connecting this unit with the

We recommend you to let the technician install the unit in your vehicle.

!


ENThema: Installation

other devices please ensure that both of the cables in each case have the same purpose. To connect everything correctly please refer to the manuals of the both devices.

» Please ensure that the negative speaker cable is in each case connected with the negative speaker terminal of the ISO port. Do not ever connect the negative speaker cables with the vehicle body.

» This unit is designed and construed for connection with 4 speakers. Do not combine this unit with devices that are designed and construed for connection with 2 speakers.

» The speakers should feature the impedance of 4-8 Ohm and a sufficient wattage.

» Please ensure that the speakers you are connecting with the unit are intact. Damaged speakers can impair the unit.

» To avoid a short circuit please isolate all cable junctions and endings of the unused cables with the electrical tape.

» All the cables should be layed and fixated tidy and properly. The cables should not contact any movable or hot objects.

» If your vehicle doesn't have an "ACC" ignition position, please connect the red cable with the ignition switch. Other-wise the unit will not turn off automati-cally, causing the discharging of the vehicle battery.

» To avoid a rogue and hazardous short circuit do not lay the yellow cable

through the engine bay in order to connect it with the vehicle battery.

» Do not ever connect speaker cables among one another. In case you do not want to connect all the 4 speakers with the unit please isolate the endings of unused cables with the electrical tape to prevent a short circuit.

» Do not ever connect the negative speaker cables with the vehicle body.

» To ensure a flawless performance of the unit the intergration angle should amount to +/- 30.


ENThema: Connection schedule – ISO plug

Connection schedule – ISO plug


ENThema: ISO plug configuration

2 1 2 14 3 4 36 5 6 58 7 8 7

A B

Socket A (power supply)

On the A side you can find the socket for power supply.

A1 – spare A2 – spare A3 – spare A4 - +12V battery / steady plus (yello)* A5 – (+) electric antenna (blue) A6 – spare A7 - +12Volt ignition plus (red)* A8 – (-) minus / ground (black)

* - Some vehicle manufacturers use their own pin assignment. Especially the terminals A7 (ignition plus) and A4 (steady plus) are often interchanged. The incorrect connection in this case leads to following problem: the unit can not be turned on if the ignition is off and all the saved settings are lost as soon as the unit will be turned off. If these problems appear the connections A4 and A7 should be interchanged.

Socket B (loud speakers)

On the B side you can find the speakers terminals.

B1 – (+) rear right (violet) B2 – (-) rear right (violet/black) B3 – (+) front right (white) B4 – (-) front right (white/black) B5 – (+) front left (gray) B6 – (-) front left (gray/black) B7 – (+) rear left (green) B8 – (-) rear left (green/black)

The terminals are coloured by pairs, in each case one (+) and one (-).

Though the design of ISO plug is standardized, it's pin assigment is not and may vary. Thus in case of mis-match of connections due to different pin assignments a simple plug'n'play connection may lead to grievous errors.

!

ISO plug configuration


ENThema: ISO cable connections

12

We recommend you to let a professional technician install the unit in your vehicle.

!

ISO cable connections

ISO cable

1. Terminal plug This plug connects the ISO cable with the unit.

2. ISO plug This plug connects the ISO cable with the vehicle. The ISO cable as such serves as an extension cable for an eased connection of the unit to the vehicle provided that the vehicle has a standardized ISO plug with the appropriate pin assignment.

Please note

» The multicore cable may vary depen-ding on the current model. Though the configuration of the loud speakers- and power supply- cables (steady plus, ignition plus, ground) is consistent.

» Certain patches could be possibly found not only on the ISO interface (socket/plug), but immediately on the device, e.g. ports for the handbrake, rearview camera, steering wheel remote control etc.

» The ISO port may be already inte-grated in certain units. In this case an additional ISO cable becomes unnecessary.


ENThema: Connection schedule – Cinch multicore

Connection schedule – Cinch multicore


ENThema: ISO cable connections

ISO cable connections

We recommend you to let a professional technician install the unit in your vehicle.

!ISO plug This plug connects the ISO cable with the vehicle. The ISO cable as such serves as an extension cable for an eased connection of the unit to the vehicle provided that the vehicle has a standardized ISO plug with the approp-riate pin assignment.

Terminal plug This plug connects the ISO cable with the unit.


ENThema: Startup operations

Replacement instructions:

1. Remove the battery compartment: push it to the left first, then pull it out.

2. Remove the old battery and insert the new one (CR-2025 Lithium).

3. Insert the battery compartment back into the remote control till it clicks into place.

Startup operations

Usage of the remote control

Before the first usage please remove the isolation plate.

Aim the remote control at the IR receiver on the front operating panel.

The IR receiver should not be blocked.

As soon as the remote control does not work proper the battery should be replaced.

Do not expose the remote control to direct sunlight or air heater.

Replacement of the battery

The remote control is operated by CR-2025 Lithium battery.

As soon as the remote control does not work proper the battery should be replaced.

!


ENThema: Startup operations

Using the 1 button on the front panel eject the disc if required.

Factory settings

Pressing the RST button you can set the unit back to the factory settings.

Use a pencil or similar to press the button. After reset the unit shuts down automatically.

Start the navigation

Press the NAVI button on the front panel. A detailed software description you will find on the homepage of the software producer.

Unit on/off

Press the left Rotary button to turn the unit on/off.

Insert a microSD card

Insert a micro SD card into the slot with the label side upwards and the pin side downwards.

Make sure that the card is intact and dirt-free.

Insert a USB flash drive

Insert an USB flash drive proper into a USB plug.

Do not insert any heavy or big USB flash drives in order not to hit it accidently - it could cause damages of the USB plug or USB flash drive.

Insert a CD/DVD

Insert the disc with the mirror surface downwards. The playback will start automatically. Make sure that the disc is intact and dirt-free.

Micro SD cards and USB flash drives should have following file-system format: FAT32 or exFat. Maximal supported capacity is 128GB. USB port supports flash drives only, no HUBs, no charging devices, no external harddics.

i


ENThema: Basic functions

Basic functions

Main menu

The first operation of the system, will default into radio state, touch the radio interface's icon to enter main menu, as shown below:

Scroll the pages

Press the sensor keys 1, 2, 3 or fondle through the touchscreen in required directionen.

Scroll the lists

Fondle the touchscreen upwards or downwards to capture the required passage in viewing area. You can orient yourself by scroll bar on the right of the screen.

Volume

Use the Rotary button on the front panel or the VOL- / VOL+ on the remote to adjust the volume.

Mute

Press the MUTE on the front panel or the MUTE button on the remote to mute the playback or to restore the sound afterwards.

Back to the current mode

Press the sensor key to leave the main menu and to go back to the current mode.


ENThema: Settings

Settings

Time Setting

Touch icon can enter time setting interface.Up and down sliding Year/Month/Date/Hour/Minute standard' number can set time needed.Touch Time zone setting icon can enter time zone setting interface.

Sound setting

Touch icon can enter below menu:

Touch icon can set function's switch.

Touch Š > icon can set BT default volume/unit start default volume.

Equalizer

Touch EQ icon can enter below menu:


ENThema: Settings

Touch Š > icon can set SUB/ Sub Phase/ Sub Freq/FAD/LOUD/BAL..

Touch icon can make all sound effect setting as initialization.

Preset Equalizer

Up and down Slide the icon to switch the EQ modes among [POP], [Rock], [Metal], [Dancemusik], [Electro] ....

[User] Equalizer:

Fader und Balance

Touch sound field icon can enter below menu:


ENThema: Settings

Wallpaper

In setting menu/main menu, touch wallpaper icon can enter wallpaper setting interface.

You can choose the wallpaper you like: up and down sliding can scan wallpa-pers, confirm and touch icon can finish setting.

Also can insert SD card in the MAP slot, and choose SD's picture as wallpaper.

SWC setting

In setting menu, touch SWC icon enter SWC setting interface.

If need reset function, click icon, then the functions set before will be deleted.Then repeat the above steps can reset corresponding functions.

1. Click the function button that need to be set

2. When the set function button is lighted, long press the correspon-ding button on car SWC, K2 icon will be lighted after set successfully

3. Touch icon can save setting

Repeat steps for the other buttons on your steering wheel.

Factory Settings

Touch Factory Settings icon can show number keyboard, input“0000” , then click icon, can go to factory setting menu. Then can set radio region/ starting logo/ function icon/etc.


ENThema: Set the GPS-Path

Calibration

If the touchscreen appears to operate not properly perhaps you have to re-ca-librate it. Choose the calibration mode and then tip the arrow key.

Procedure:

As soon as the calibration starts on the screen appear 5 crosses. You have to tip the very middle of each following the numeration: 1, 2, 3, 4, 5.

In ideal case use the specially designed stylus.

As soon as you tipped each of the crosses the touchscreen is calibrated.

Please note: you have to TIP only the

CROSSES, do not fondle through the

touchscreen.

Language setting

Touch Language icon can enter Language setting interface, set the language needed.

Brightness

Left and right sliding icon can adjust screen's brightness.

Set the GPS-Path

You have to set he correct path to the executive file of the navigation software on the SD memory card so the unit's processor could find it and start the programm properly.

Please tip the NAVI key on the front control panel. Now tip the correspon-ding folder in the file manager and then confirm your selection tipping the

key on the screen. Perhaps you will have to scroll the file list to find the executive file. Once you found it tip it as well and then confirm the selection with


ENThema: Set the GPS-Path

the key.

Regular software path for CAR NAVIGATOR:

\XROAD\XROAD.exe

i


ENThema: Storage media

Supported formats

Video

» XVID coded AVI files

» MPEG4 coded AVI files

» MPEG1 coded MPG files

» VOB files

» RMVB Real Player files

The MP4 format will not be supported. Do not mistake the MPEG4 Codec for container format MP4.

Audio

» MP3 files (ID3 tag support)

» WMA files Bilder

» JPEG

» BMP

Disfunctions due to non-com-pability can not be regarded as a product's flaw and are not covered by warranty.

!

Please note that some files can have diverse characteristics (codings, resolutions). It may lead to disfunctions during the playback.

i

Storage media

Supported media

» DVD, DVD-R, DVD+R

» CD, CD-R

» VCD, SVCD

» MP3-CD/-DVD

» USB flash drives, max. capacity 128GB, FAT32 or exFAT file system

» micro SD-/SDHC card, max. capacity 128GB, exFat or FAT32 file system

» Alternative sized SD cards can be used with the help of an USB adapter.

micro SD card

! All the optical media (CD, DVD, VCD) should be sized as standard 12cm Ø. The media with other size, shape could damage the optical device.


ENThema: Radio mode

Automatic frequency scan

[Intro] Touch radio menu's Sicon, short-press to browse stored stations ;

[Scan] long-press can scanning stations automatically and store the strongest signal stations on the screen.

Store the found stations

There are 30 memory cells in total to store your favorite radio stations: P1-P6 within FM1,FM2,FM3 and P1-P6 for AM1,AM2 frequency band. To store the current station in one of the memory cells hold the corresponding sensor key for a couple of seconds pressed.

Switch AM/FM

Press the icon, can switch between Fm1/ FM2/FM3/AM1/AM2.

Radio mode

Touch icon in the main interface to enter into the radio interface.

Touch or icon to low or high frequency end station scanning.

Touch icon to show channel selection keyboard, and input station frequency to choose station; can also drag the table feet or directly touch the stored radio icon to choose station playing.

Radio mode


ENThema: Radio mode

LOC signal sensitivity

Press the sensor key to switch between the local and distanced stations mode. When the function is activated the radio searches only for the local stations with the strong enough broadcasting signal. Otherwise the radio finds the more distant stations as well.

AF funktion (Alternative Frequency)

The AF function switches automatically to alternative radio station as soon as you leave the receiving area of the current station.

TA funktion (Traffic Announcement)

While this function is activated the unit switches automatically to the radio mode for the current traffic announ-cement. After the announcement it switches back to the initial modes.

PTY Funktion (Programme Type)

The Programme Type function allows to search for a station according to it's type (e.g. music or education).


ENThema: USB-, SD- and Disc- modes

Start the playback

Tip the name of the required track on the touchscreen. The playback interface appears on the display and the playback starts automatically.

USB-, SD- and Disc- modes

Start the playback mode

As soon as you plug or insert a valid USB flash drive or SD card the unit switches automatically to the corresponding mode, starting the playback. You can also switch to the required mode pressing the correspon-ding sensor key in the main menu.

Files list

Press the sensor key to switch to the list of files which are categorized as follows:

- Musik

- Videos

- Fotos.

Tip the corresponding icon to unfold the whole list of files of the required category. Press the sensor key to organize the files according to their folders. Tip the specific folder to show the files within this very folder. Only the playback supported files will be visible.


ENThema: Music playback mode

Random playback

Press the sensor key to de-/activate the random function.

ID3 tag (Title, Interpretor)

The ID3 function allows to display the name of the currently played interpretor, title and album. The album cover can be displayed as well. This function is availa-ble in mp3 format only. The information should be stored in the mp3 files.

Music playback mode

Play/Pause

The sensor key pauses the play-back, the key resumes it.

Previous / next track

Press the / sensor keys on the touchscreen.

FF / Rewind

Put your finger on the cursor of the playback progress bar and scroll it to the required time point.

Repeat track

Press the sensor key to REPEAT ALL, REPEAT SINGLE or to turn the REPEAT OFF.


ENThema: Video playback

Previous / next track

Touch icon can choose last video playing or touch icon to choose next video playing.

Select track directly (GOTO)

You can select a track directly to play it immediately: during the playback press the icon.

Repeat track

Press the sensor key to REPEAT ALL, REPEAT SINGLE or to turn the REPEAT OFF.

Random playback

Press the sensor key to de-/activate the random function.

Switch the subtitles

Press the sensor key to switch between the on DVD available subtitles in *.SRT format only.

Display the OSD Video menu

During the playback tip the touchscreen to display the control panel, menus and additional information. After 5 seconds being not used the OSD disappears.

Start DVD playback

The playback starts automatically as soon as you insert the medium (USB flash drive, SD card, CD/DVD) or switch to one of these modes.

Play/Pause

Press to hold / resume the play-back.

FF / Rewind

Put your finger on the cursor of the playback progress bar and scroll it to the required time point.

Video playback


ENThema: Video playback

Switch the soundtracks

Press the sensor key to switch between the on DVD available soundt-racks.

Call up the DVD menu

Press the sensor key to access the DVD menu.

DVD video zoom in / out

Use the / sensor keys to zoom the image in / out.


ENThema: Picture viewer mode

Zoom in / out

Use the / sensor keys to zoom into or out from the picture stepwise: x2 _ x3 _ x4 _ Normal. or x1/2 _ x1/3 _ x1/4 _ Normal.

Open the picture

Tip the name of the picture file in the files list. As soon as one of the pictures will be opened the programm starts automatically the slide show of all available images of the current folder.

Display the options

Tip the touchscreen during the slide show. The OSD menu with the control panel appears on the screen disappea-ring in 5 seconds after being not used.

Pause / resume the slide show

Press to hold the slide show and to resume it.

Previous / next picture

Press to skip to the previous image or to the next one.

Select file directly (GOTO)

You can select a file directly to play it immediately: during the playback press the icon.

Picture viewer mode


ENThema: Bluetooth connection

Bluetooth connection

Start Bluetooth mode

Press the sensor key in the main menu. Sensortaste.

Pairing the unit with an external

device

Before the first usage of any Bluetooth function the unit should be connected via Bluetooth with the device of your choice, e.g. your cell phone:

A Activate the Bluetooth function in your cell phone. * In order to find out how to activate the Bluetooth function on your cell-phone or other device please read the corresponding manual.

B Search for a new device named SL-CAR-KIT (this very unit).

C Select it to build a connection between your cellphone and the unit.

D If required enter the password "0000" and confirm the entry.

E Now the both are connected, the prompt appears on the display.

Touch icon can disconnect current connection; after disconnection, press again to re-connect last device; choose one of matching record, press again can delete it.

Common information

This unit contains a Bluetooth feature "hand-free phone call" which allows to make your phone calls hand-free via integrated microphone and loudspea-kers.

Please note: all the names and numbers used on the images of this manual serve as an example only and any match with real life persons and their data are coincidentally and unintentionally.

Make a call

Press to switch to the numeric pad.

Once you have connected via Bluetooth the unit with an external device of your choice, the connec-tion will be built automatically as soon as the device appears in the receiving area of the unit.

The Bluetooth function should be "ON" both on the external device and on the unit.

i


ENThema: Bluetooth connection

When phone and car unit connected successfully, input number buttons in touch screen, and touch icon to dial.

In dialing mode, if input wrong number, click icon can delete number one by one.

You can also find the required number on one of the protocol lists or in your telephone book and tip it to dial the number.

Take a call

Press by an incoming call to take it.

End / reject the call

Press when the conversation is over or by an incoming call.

Phone book

To access the phone book press .

Load the data from the external

phone

Press to import the data from your cell phone. The confirmation of share of the cell phone data can be required.

All the imported data remain stored in the unit's memory and are available even if the connection between the unit and the source (cell phone) is inter-rupted.

Dial the number from the book

Find the required name or number in the book and tip it to start the call.

Search within the book

Use the "search" option: press to display the keyboard. .

Now enter the name of the required person. Press the sensor key again to hide the keyboard


ENThema: Bluetooth music

Phone protocol

Press to call up the lists.

There are three types of protocols: dialed numbers, incoming calls, missed calls. The corresponding short cut keys you can find on the left menu bar:

- missed calls

- incoming calls

- dialed numbers

- empty the lists

Bluetooth music

Common information

The "Bluetooth music" feature allows to play the music from the external device of your choice (cellphone, smartphone, tablet PC) via car radio speakers. The device should support the A2DP service.

Start Bluetooth music

Press the Bluetooth music inter-face appears on the screen. Now load the playback program on the external device and start the playback.

- Touch icon can pause/play.

- Touch icon can play last song.

- Touch icon can play next song.


ENThema: Rear view camera (optional)

Rear view camera (optional)

Common information

A rear view camera is an optional accessory. Please inform yourself by your local specialist supplier about current models and their options and possibilities.

You can find compatible cameras on the homepage: www.carmediashop.de

All the cameras are equipped with video cinch output.

Rear view cameras are to be installed at the rear of the vehicle. They serve as a parking assist element and an auxiliary extension of the viewing angle while reversing.

Please do not rely on the came-ra's picture only while reversing. A rear view camera serves as an additional assistance, it can not sub-stitude your full attention driving.

!

Connection

The camera port CAM is located on the rear side of the unit.

The yellow cinch jack is the terminal for the incoming video signal from the camera. Plug the video cable of the camera into it. The unit's cable as well as the camera itself has to be connected with the rear lights of the vehicle (+12V) to ensure the correct functionality of the camera mode.

Start the rear view camera mode

If the camera was connected properly the unit switches automatically to the camera mode as soon as you shift the reverse gear. As soon as you shift any other gear the unit switches back to the previous mode.


ENThema: AV-IN Mode

AV-IN Mode

Common information

The AUX input allows you to connect an external device of your choice and play the content stored there via AUX mode on unit's sound system. It could be an MP4-Player, Smartphone, Cellphone, Tablet, Video-Player, DVB-T Receiver etc.

The AUX port has 3 regular channel: Video (yellow), Audio Left (white or black) and Audio Right (red).

Start the AUX mode

Press the sensor key on the screen (AV_IN).

If the device is a videoplayer it's picture appears on the unit's screen. Otherwise only the audio signal will be transmitted.


ENThema: Common solutions

Describtion of the problem

Cause and solution

The remote control is without function.

Solution 1: Please ensure that the battery film is removed. By delivery the battery is protected by a film which should be removed before usage. Solution 2: The battery could be empty. Please replace it if required. Solution 3: Please make sure that the infrared receiver (labelled with IR) on the control panel is not blocked. Note: You can test the functionality of the remote control as follows: please hold the IR transmitter towards a camera (e.g. a cell phone camera) and press any button on the remote control. If the remote control is operative you can see the infrared signal on the display of the used camera device.

Radio stations are lost: As soon as the unit will be turned off all the stored stations and user's settings will be lost.

This problem is caused due to a wrong connection of the ISO cable. Please interchange the cables for ignition plus and for steady plus. Caution: If these wires have fuses, the latter should be interchanged as well.

Common solutions

The following advices are generally valid and refer to diverse Xomax models with the similar characteristics. Please note that some articles may refer not to your model exactly and may contain the describtion of features and functions that your model does not support.


ENThema: Common solutions

Poor radio recep-tion: The radio tuner finds no broadcaster or the reception is poor.

For problem-solving regarding the radio reception it is important to know the type of the antenna of your vehicle. Here are the possible solutions for each type of the antenna: Type 1 – passive antenna: We recommend you to substitude the existing antenna by the larger and therefore more efficient one. Shark fin or rod antennas (under 5 cm) are definitely insuffi-cient. Type 2 – active antenna: The vehicle provides no current for the active antenna. In this case a phantom power is required, which provides the active antenna with the external power supply. Type 3 – active antenna with diversity system: The unit provides no current for the active antenna and has no diversity support. For this type of antenna is required the phantom power with an integrated diversity system. Note: A phantom power is not to be confused with an antenna amplifier, which is far less efficient.

The unit does not turn on.

This problem is in most cases caused due to a wrong connec-tion of the ISO cable. Please review the pin assignments of the ISO plug and ISO socket. Pay attention to the proper connection of the ignition- and steady plus and correct the discrepancy if required. Note: Though the design of ISO port is standardized, it's pin assigment is not and may vary. Thus in case of mismatch of connections due to different pin assignments a simple plug'n'play connection may lead to grievous errors.


ENThema: Disposal / recycling information

Disposal of an old unit / battery

User information regarding disposal of

electric and electronic devices (private

households)

This symbol on products or in their manuals implies that electric and electronic devices at the end of their service life should be separated from the domestic waist.

Please hand these products for recy-cling at municipal collection points free of charge.

The proper disposal of these products contributes to environment protection. To find the nearest collection point or recycling yard please consult your municipal administration.

According to the battery decree we make you aware of your obligation to dispose of empty batteries at municipal collection points.

Batteries that contain pollutants (e.g. Hg = mercury, Pb = lead, Cd = cadmium) are labelled with the symbol pictured above.

At our place you can free dispose of the empty batteries purchased at our store.

Disposal / recycling information

XOMAX distribution worldwide Purchase XOMAX car radio online: https://www.carmediashop.de

XOMAX in the world wide web

XOMAX manufacturer's information: http://www.xomax.de

Find uson Facebook

https://www.carmediashop.de/

http://xomax.de/

XOMAX XM-DTSBN921 Bedienungsanleitung · xomax.de, view them on your mobile devices and print them...

Documents

Transcript of XOMAX XM-DTSBN921 Bedienungsanleitung · xomax.de, view them on your mobile devices and print them...