XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting...

43
XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 The XRT Point Spread Function Andy Read

Transcript of XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting...

  • Slide 1
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 The XRT Point Spread Function Andy Read
  • Slide 2
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 The XRT Point Spread Function Andy Read Updates from previous BOC meeting New developments, remodellings, central peaks, EBG, triangles & pentagons Migrating into CAL & SAS: CCF, arfgen et al, - The Full 2-D PSF First tests in SAS & CAL
  • Slide 3
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 Energy Off-axis angle PN 2XMM source list - select M1, M2, PN point sources that have large numbers of counts, are below pile-up limit, cover full range in off-axis angle (>250 obs) create calibrated event lists Clean event files (high-BG, out-FOV etc.), extract source, reject bad fields, create source images (all E-bands, all instruments), subtract other sources, detector-rotate, Gaussian re-centre Stack good images together for each instrument (pn, M1, M2), E-band, off-axis angle - clean, BG-subtract stacked images, re-normalize, create CCF-like files Improvements in source-detection for bright on- and off-axis sources Blue: current CCFs Green: New 2-D PSFs EPIC PSF : Determining the on- and off-axis 2-D PSF
  • Slide 4
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 Energy Off-axis angle PN EPIC PSF : Determining the on- and off-axis 2-D PSF Spoke non-rotation means that spokes in theta-phi-corrected stacked images are smeared out and averaged. These images can be used to parametrize the average PSF model.
  • Slide 5
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 Use AMR-created azimuthally-stacked 2-D PSF real-data images (for each instrument, energy, off-axis angle) Use CIAO-Sherpa to fit elliptical + Gaussian profile (beta2d + gauss2d) to images (central Gaussian to model core) Elliptical (core radius, alpha, ellipticity [tied]) and Gaussian (FWHM, ellipticity [tied]), plus relative (G/E) normalization, obtained for each instrument, energy, off-axis angle CCF files have been produced (RDS) with new EBG PSF CCF extension Numbers/trends/problems currently being reviewed (improvements have been [and will be] made) Can be used in arfgen... New CCF PSF EBG - EllBetaGauss Elliptical (Beta) plus central Gaussian parametrization of the 2-D PSF
  • Slide 6
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 Example : MOS2 - Rev 301 (MCG-06-30-15) 0.225 keV King fit Central Gaussian needed to model just the very centre
  • Slide 7
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 Example : MOS2 - Rev 301 (MCG-06-30-15) 0.225 keV King + Gaussian fit Note normalization ratio ~20% Note Gaussian is narrow Central Gaussian needed to model just the very centre
  • Slide 8
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 PSF King+Gaussian 1-D Fitting - Ratio of normalizations [Gauss/King] versus Energy - M1/M2 : Significant Gauss component required, at low/medium-E [no Gauss component required at high-E] - PN : No significant Gauss component required Central Gaussian needed only for MOS and at low & medium energies
  • Slide 9
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 EBG Elliptical (Beta) + central Gaussian
  • Slide 10
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 Calculated Enclosed Energies at various energies and off-axis angles for 20 and 40 circles from the EBG CCF parameters MOS1 20 40
  • Slide 11
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 20 40 Calculated Enclosed Energies at various energies and off-axis angles for 20 and 40 circles from the EBG CCF parameters MOS2
  • Slide 12
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 20 40 Calculated Enclosed Energies at various energies and off-axis angles for 20 and 40 circles from the EBG CCF parameters PN
  • Slide 13
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 20 40 Calculated Enclosed Energies at various energies and off-axis angles for 20 and 40 circles from the EBG CCF parameters SCISIM (CCF MEDIUM same for all EPIC instruments)
  • Slide 14
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 First good set of model parameters (core radius [E], slope [E], ellipticity [E&G], FWHM [G], normalization ratio [G/E]) estimated for each EPIC instrument (3), off-axis angle (6) and energy (8) First CCFs (M1, M2, pn) have been created (AMR -> RDS) CAL software/calls essentially completed calls need to be included in SAS tasks arfgen able to work with optimally-selected elliptical regions, and with EBG parameterization (RDS) First tests of arfgen usage, enclosed energies obtained, fluxes obtained - all in progress Hopefully full EBG system by next major SAS release Status EBG Parametrization
  • Slide 15
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 EBG Parameters in CCF Files
  • Slide 16
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 1 st study of 24 off-axis point sources (M. Guainazzi, R. Saxton, M. Stuhlinger) Comparing flux ratios in several energy bands: New/Old New: via (optimum) elliptical spectral extraction (new eregionanlyse), using new arfgen and new EBG PSF Old: via circular spectral extraction, using arfgen and old EXTENDED PSF MOS1
  • Slide 17
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 MOS2 Both MOSs show zero to very small flux decreases over soft to medium-hard energy ranges. 7-9% decreases are seen in the hardest energy range (4-10 keV)
  • Slide 18
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 pn pn shows very small flux increases over soft to medium-hard energy ranges. 5% decrease is seen in the hardest energy range (4-10 keV)
  • Slide 19
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 Consistent improvements in the MOS2/pn flux ratio, with some evidence for similar improvements for MOS1/pn Large scatter, low stats at very lowest energy so far (See RDS BOC talk for details on M09 paper)
  • Slide 20
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 The star-like pattern the spokes is created by the spider which supports the 58 co-axial Wolter I mirrors of the telescope The Full 2-D PSF
  • Slide 21
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 Observed spokes are actually due to the gaps between the spider legs, not the legs themselves, which are coincident with the secondary spikes and the dark lanes. Without the spider you would see uniform scattering wings without the radial gaps.
  • Slide 22
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 Dark lanes? Shadowing must be due to the electron deflector arms which mirror the spider and are mounted after the rear aperture. Secondary spokes? Due to scattering at a small level from the sides of the spider legs.
  • Slide 23
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 In (PA-corrected) space, the spokes are not rotated, as the source moves about on the detector i.e. anywhere on the detector(s), the source spokes keep the same orientations for all EPIC 16 main spokes 22.5 apart (360/16) Offset of 11.25 (22.5/2) General well-known tangential sagittal-plane stretching rotates with the source around the detector Spokes and other (to be seen later) components do not rotate around the detector The PSF of a source at a particular azimuth is not merely a simple rotation of the same source at a different azimuth Each point on each EPIC detector has a unique PSF
  • Slide 24
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 In an observation, though all the sources are tangentially distorted at different angles, the spokes from all the bright sources line up
  • Slide 25
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 From EBG to the Full 2-D PSF Stacked images in general work well in emldetect Can model these images (and have done - EBG) Can create idealized images from these models (EBG image, example shown right) These however have a smeared azimuthal dependence (created from several sources at different azimuths) Need to (in CAL/CCF/emldetect): choose/create the correct EBG image (instrument, off-axis angle, energy) rotate the EBG image for the detector position of the source factor in the known azimuthal (spokes etc.) dependence i.e. filter the EBG image azimuthally, retaining overall profile, and including correct angles, offsets, spoke sizes etc Finally, filter in (via similar method) any gross azimuthal filtering (e.g. the MOS2 triangle)
  • Slide 26
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 Flat-Topped Triangular Function spoke 22.5 1.00 0.18 Estimated (from the data) widths of various components Profile needs to be such that no change is introduced to the full (360) radial profile i.e. areas need to cancel out X Y H 1.00 2 2X + Y H = 1
  • Slide 27
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09
  • Slide 28
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 Look at the gross azimuthal properties... e.g. The MOS2 triangle Certain (sets of) MOS2 mirror shells are not perfectly circular It is a mirror effect, like the spokes, and does not rotate with position on the detector
  • Slide 29
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 MOS2 = 0 Strong effect! (45%) 3-peaked cosine function fits well (peaks at 50, 170, 290) 45% of mean
  • Slide 30
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 MOS1 13% of mean Much weaker (~13%) 5-peaked pentagon function (cosine) (62, 134, 206, 278, 350)
  • Slide 31
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 PN Nothing seen (yet) in pn
  • Slide 32
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 Point Spread Function: Six stages towards a full 2-D PSF MOS1MOS2 [1] Ell. PSF at given off-ax angle/energy [2] Central Gauss peak (off-ax/en) [3] Combine 1+2 [4] Rotate to correct source PA [5] Az-filter spoke structure [6] Az-filter gross azimuthals EBG
  • Slide 33
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 Energy Off-axis angle M1
  • Slide 34
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 Energy Off-axis angle M2
  • Slide 35
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 Energy Off-axis angle PN
  • Slide 36
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 Uses EBG parameterization as seed hence needs EBG system & CAL to be already in place it is Requires very large software migration and updates to CAL (completed) & SAS/emldetect (first stages) First pieces of software (IDL) sent (late 08) to RDS First full set of code sent early 09 First SAS/CCF version appearing ~now (e.g. calview/psfgen can create full 2-D PSF) Only when in place can any sensible testing be started (source- detection, source parameterization etc. SSC/SOC to perform testing) If no major problems, may have a first beta version in place by next major SAS release but, some problems... Status Full 2-D PSF
  • Slide 37
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 Full 2-D PSF some initial problems...
  • Slide 38
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 Full 2-D PSF ...now looking good AMR CAL AMR/CAL
  • Slide 39
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 Full 2-D PSF ...now looking good AMR CAL AMR/CAL Moir-like interference pattern actually in AMR image
  • Slide 40
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 Full 2-D PSF ...now looking good Full 2-D PSF now in CAL accessible via e.g. calview
  • Slide 41
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09
  • Slide 42
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 Georg/AIP to incorporate into emldetect and perform testing idea is to make ELLBETA (EBG) PSF an option in emldetect, with the default still set to MEDIUM SSC to test emldetect with ELLBETA over many fields (all types normal, crowded, problem fields) compare results Continuing spectral tests (ESAC) of bright off-axis (and on-axis) sources with arfgen and ELLBETA Rigorous spectral analysis of bright sources using complex models and various extraction 'radii' (Future) Re-stacking, re-modelling of more data to obtain better EBG parameters update CCFs especially at high-energies... Full 2-D PSF Testing...
  • Slide 43
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 MOS events spread across the RGS dispersion axis Is this a PSF issue? Out-of-time events? Is this a PSF issue? Some proper handling of the Sagittal-Meridional effect (off-axis and energy dependent) Azimuthal phi-dependence of the EBG parameters? e.g. RGA obscuration, individual chip-to-chip height variations Pentagon in pn? Dark lanes electron deflector?... Full 2-D PSF The Far Future...
  • Slide 44
  • XMM EPIC MOS Andy Read ([email protected]) Background, Operations & Calibration (BOC) meeting Mallorca, 30/03/09-01/04/09 End