Û|xH Þ áV÷) #Ò2@ · to decrease the pitch angle. turn counter-clockwise to increase the pitch...

15

Transcript of Û|xH Þ áV÷) #Ò2@ · to decrease the pitch angle. turn counter-clockwise to increase the pitch...

Page 1: Û|xH Þ áV÷) #Ò2@ · to decrease the pitch angle. turn counter-clockwise to increase the pitch angle. when achieved to the desired pitch angle, tighten the safety nuts (see figure
Page 2: Û|xH Þ áV÷) #Ò2@ · to decrease the pitch angle. turn counter-clockwise to increase the pitch angle. when achieved to the desired pitch angle, tighten the safety nuts (see figure
Page 3: Û|xH Þ áV÷) #Ò2@ · to decrease the pitch angle. turn counter-clockwise to increase the pitch angle. when achieved to the desired pitch angle, tighten the safety nuts (see figure
Page 4: Û|xH Þ áV÷) #Ò2@ · to decrease the pitch angle. turn counter-clockwise to increase the pitch angle. when achieved to the desired pitch angle, tighten the safety nuts (see figure
Page 5: Û|xH Þ áV÷) #Ò2@ · to decrease the pitch angle. turn counter-clockwise to increase the pitch angle. when achieved to the desired pitch angle, tighten the safety nuts (see figure

Cloth shaft Bracket

cloth shaft

force

45

63

4.0

40

3.5

3.5x2.5m4x2.5m, 5x3m

Page 6: Û|xH Þ áV÷) #Ò2@ · to decrease the pitch angle. turn counter-clockwise to increase the pitch angle. when achieved to the desired pitch angle, tighten the safety nuts (see figure

3 5x2.5m 2xBracket

4x2.5m / 5x3m: 3xBracket

3.5x2.5m: 2xsecurity screw

4x2.5m / 5x3m: 3xsecurity screw

. :

Page 7: Û|xH Þ áV÷) #Ò2@ · to decrease the pitch angle. turn counter-clockwise to increase the pitch angle. when achieved to the desired pitch angle, tighten the safety nuts (see figure
Page 8: Û|xH Þ áV÷) #Ò2@ · to decrease the pitch angle. turn counter-clockwise to increase the pitch angle. when achieved to the desired pitch angle, tighten the safety nuts (see figure
Page 9: Û|xH Þ áV÷) #Ò2@ · to decrease the pitch angle. turn counter-clockwise to increase the pitch angle. when achieved to the desired pitch angle, tighten the safety nuts (see figure

Awning may only be monted on sustainable ground! Use suitable mounting material (not included)

MOUNTING EXAMPLE WITH ANCHOR

IN SOLID WALL OR CEILING:

Page 10: Û|xH Þ áV÷) #Ò2@ · to decrease the pitch angle. turn counter-clockwise to increase the pitch angle. when achieved to the desired pitch angle, tighten the safety nuts (see figure

key

Page 11: Û|xH Þ áV÷) #Ò2@ · to decrease the pitch angle. turn counter-clockwise to increase the pitch angle. when achieved to the desired pitch angle, tighten the safety nuts (see figure

adjusting screw

safety nuts Bolts No.9

Loosen the locking safety nuts of bolts No.9 with a 14mm wrench. Turn the adjusting the screw clockwise to decrease the pitch angle. turn counter-clockwise to increase the pitch angle. when achieved to the desired pitch angle, tighten the safety nuts (see figure H)

Page 12: Û|xH Þ áV÷) #Ò2@ · to decrease the pitch angle. turn counter-clockwise to increase the pitch angle. when achieved to the desired pitch angle, tighten the safety nuts (see figure
Page 13: Û|xH Þ áV÷) #Ò2@ · to decrease the pitch angle. turn counter-clockwise to increase the pitch angle. when achieved to the desired pitch angle, tighten the safety nuts (see figure

44

Page 14: Û|xH Þ áV÷) #Ò2@ · to decrease the pitch angle. turn counter-clockwise to increase the pitch angle. when achieved to the desired pitch angle, tighten the safety nuts (see figure
Page 15: Û|xH Þ áV÷) #Ò2@ · to decrease the pitch angle. turn counter-clockwise to increase the pitch angle. when achieved to the desired pitch angle, tighten the safety nuts (see figure

awning doesn't close properly one side only

check adjustment of articulation armline the fabric one sided for more volume