【 X431 Function】Renault Koleos The radio sound unlocking operation method. 2016-04-26 golo官微

Car Model

Renault Koleos，The radio sound unlocking，Prompt：“Code validation in progress…”，see pic 1.

pic1 After the radio sound is handled by this article, it can work normally，see pic2。

pic2

Function Description

This test aimed to unlock the radio.

NOTE

Before testing, please follow instructions as follow:

- If vehicle equipped with manual transmission .Please step down and release the clutch pedal - The vehicle static. - Have to apply Parking brake. - For manual transmission, shift lever to empty space. - For automatic transmission, change the lever to P position.

Instructions

I.Test the radio failure

1. Select KOLEOS V42.31 above； 2. Manual Selection，see pic3；

3. Select the car model KOLEOS see pic4 ；

4.Select radio system, see pic 5;

pic3

图4

5. Select reading fault code; see pic6；

6.Dispaly error code as follow; see pic7；

pic5

pic6

pic7 7. The failure code shown in figure 7 indicates that the radio is locked，Simply enter the multimedia interface system for special functions "vehicle identifiers".

II. Select multimedia interface for special function unlock 1. Manual Selection, see pic8；

2. Select Car Model KOLEOS，see pic9；

3. Select multimedia interface system, see pic10

4. Select special function，pic11；

pic8

pic9

pic10

5. Select the vehicle identifier，see pic12；

6.Prompt which car model is suitable .see

pic 13；

pic11

pic12

pic13 8. Click“Confirm”，finish the prompt: After the configuration is completed (radio + interconnect/monitor), turn off the ignition switch and check the radio on + Whether the power supply location works normally, as shown in figure 14.

pic14

9.After confirming, switch off the key，Exit to software. Switch on the ignition key. Check the function of the radio.