X-DRIVER · 2020-02-20 · 62 X-DRIVER X-DRIVER The new smart X-DRIVER LED converter, available in...

www.domusline.com62

X-DRIVER

X-DRIVERThe new smart X-DRIVER LED converter, available in three powers (15W, 30W and 60W)

is an all-in-one device. Four control modules operate two outputs for infrared and

presence sensors, or convert the power supply into a wireless receiver for remote controls

and, using Bluetooth technology or Wi-Fi, into a luminaire to control all Domus line LED

luminaires by smartphone or voice control devices. X-DRIVER is a multi-net power supply

(110-240Vac) for either 12Vdc or 24Vdc LED luminaires with a Plug&Play power cord

available with standard international plugs. X-DRIVER is a multi-net power supply

(110-240Vac) for either 12Vdc or 24Vdc LED luminaires with a Plug&Play power cord

available with standard international plugs. ENEC, CB Scheme, EAC, UL, RCM approved,

X-DRIVER is a universal power supply which can be exported worldwide.

DOMUS4UAPP COMPATIBLE WITH X-DRIVER TO MANAGE LIGHTS FROM SMARTPHONES.

Google Play and the Google Play logo are trademarks of Google Inc.

X-DRIVER

Domus Line design

All-in-one LED converter

Input:110-240VacOutput:12-24VdcPower:15W, 30W, 60WPower cord:Plug & PlayConnection system:Micro12 - Micro24

Apple and the Apple logo are trademarks of Apple Inc.

Make your home smart with X-DRIVER

DOMUS4U WI-FIAPP COMPATIBLE WITH X-DRIVER TO MANAGE LIGHTS FROM SMARTPHONES.

www.domusline.com 63

X-DRIVER

UK standard

USA - CANADA standard

AU - NZ standard

CM2-XD

12Vdc 24Vdc

CM1-XD CM3-XD CM4-XD

IR WI-XD WIRELESS

PIR WI-XD WIRELESS

CM1-XD _ Control with PIR motion sensor and IR sensorCM2-XD _ RF remote control CM3-XD _ Bluetooth for appCM4-XD _ Wi-Fi for App

X-DRIVER collection

SMART LED UNIVERSAL CONVERTER

IR sensorPIR sensor

X-DRIVER + CM3 + DOMUS4U APP

This configuration can control up to 5 independent X-DRIVER devices after downloading the DOMUS4U app.

X-DRIVER + CM2 + CALL MEWith this configuration, an unlimited number of X-DRIVER devices can be combined with a single wireless remote control, provided they are no more than 15 metres away.

EUROPE standard

WATCH THE TUTORIAL VIDEOS

CM4-XD _ the new Wi-Fi module

The new CM4-XD control module activates the wireless function, which allows X-DRIVER to interface with the home Wi-Fi network: so it will be possible also to control and adjust the lights via Amazon Echo voice-controlled devices.

www.domusline.com64

X-DRIVER

X-DRIVER 15/12R

49

171

187

16

12Vdc

X-DRIVER 30/12R

202

218

16

60

12Vdc

12Vdc

X-DRIVER 60/12R 2.0

1 Sold separately.

Code 0859201N

Input 110-240Vac

Output 12Vdc

Power 15W

Input wiringPlug&Play power cord with standard EU, BS, NEMA, Australia/New Zealand plug1

Output wiringBuilt-in distributor with 4 Micro12 female connectors

for 12Vdc LED

Code 0859401N

Input 110-240Vac

Output 12Vdc

Power 30W



for 12Vdc LED

Code 0869801N

Input 110-240Vac

Output 12Vdc

Power 60W



for 12Vdc LED


X-DRIVER

X-DRIVER 15/24D

49

171

187

16

24Vdc

X-DRIVER 30/24D

202

218

16

60

24Vdc

X-DRIVER 60/24D 2.0

24Vdc

Code 0859301N

Input 110-240Vac

Output 24Vdc

Power 15W



for 24Vdc LED

Code 0869901N

Input 110-240Vac

Output 24Vdc

Power 60W



for 24Vdc LED

Code 0859501N

Input 110-240Vac

Output 24Vdc

Power 30W



for 24Vdc LED

1 Sold separately.

www.domusline.com66

X-DRIVER

D

B

C

A

A

B

C

A

BC

A

D

D

The CM1-XD control module activates the two outputs dedicated to infrared IR-XD sensors and PIR-XD presence sensors, to be purchased separately.

The CM2-XD control module transforms the power supply into a wireless receiver for remote controls, to be purchased separately.

The CM3-XD control module activates the Bluetooth function for managing the lights from smartphones, via the DOMUS4U App.

The CM4-XD control module enables the wireless function, which allows X-DRIVER to interface with the Wi-Fi network.

Type Code Standard

A 1159701/S 2000mm Plug&Play power cord with 2P Europlug and IEC C7 connector

A 1159703/S 2000mm Plug&Play power cord with 2P Europlug and IEC C7 connector

B 1159801/S 2000mm Plug&Play power cord with NEMA type A 2P plug and IEC C7 connector

C 1159901/S 2000mm Plug&Play power cord with BS 1363 3P plug and IEC C7 connector

D 1160001/S 2000mm Plug&Play power cord with SAA 3P plug and IEC C17 connector

for X-DRIVER collectionPOWER CORDS

for X-DRIVERCONTROL MODULES

Type Code Model Application functions

A 1755201/S CM1-XD IR-XD infrared sensors and PIR-XD passive infrared sensors

B 1755301/S CM2-XD 2.4G wireless remote controls, IR-XD and PIR-XD, IR WI-XD and PIR WI-XD

C 1755401/S CM3-XD Bluetooth remote controls, IR-XD and PIR-XD

D 1781501/S CM4-XD Wi-Fi remote controls


X-DRIVERX-DRIVER

*

PIR WI-XD

IR WI-XD

Wireless infrared presence sensor

Code Model Set up and fuction

17806_ _ PIR WI-XD On-off wireless presence self-powered sensor

How PIR WI-XD works

PIR WI-XD is a self-powered wireless presence sensor (with lithium battery) which can be configured with the entire collection of X-DRIVER and X-DRIVER TW converters, complete with CM2-XD or CM2-XD TW module.

The system is set up simply by pressing the warning light on the X-DRIVER and the configuration button located on the front of the PIR WI-XD enclosure.

Each set-up is independent. In this manner, up to 7 PIR WI-XD devices can be configured with only one X-DRIVER and X-DRIVER TW converter.

The wireless solution and the possibility of installing recessed PIR WI-XD, using the same supports as CALL ME V17, mean quick and extremely simple installation.

Wireless infrared proximity sensor

Code Model Set up and fuction

17807_ _ IR WI-XD LSW On-off wireless proximity self-powered sensor

17808_ _ IR WI-XD DSW On-off touchless dimmer self-powered sensor

IR WI-XD is a self-powered wireless proximity sensor (with lithium battery) which can be configured with the entire collection of X-DRIVER and X-DRIVER TW converters, complete with CM2-XD or CM2-XD TW module.

The system is set up simply by pressing the warning light on the X-DRIVER and configuration button located on the back of the IR WI-XD enclosure.

Each set-up is independent. In this manner, up to 7 IR WI-XD devices can be configured with only one X-DRIVER and X-DRIVER TW converter.

The wireless solution and the easily replaceable battery make installation quick and extremely simple.

The IR WI-XD LSW sensor may also be used with only the on/off function.

The IR WI-XD DSW sensor may also be used with X-DRIVER TW with on/off and colour changeable functions, while with X-DRIVER with on/off and dimmer functions.

How IR WI-XD works

* PIR WI-XD is supplied with supports for recessed installation (both square and round) or on the surface.

Code Finish

03 black

10 aluminium

Code Finish

03 black

10 aluminium

ROUND HOLDER

SQUARE HOLDER

SURFACE SUPPORT

www.domusline.com68

X-DRIVER

B

A

B

A

infrared sensor

for X-DRIVER

IR-XD

REMOTE CONTROLS

Recessed installationIR-XD LSW

Surface installationIR-XD LSW

Code Model Setup and functions

1759101/S IR-XD LSW Back-door proximity sensor with 2000mm cord

1756101/S IR-XD DSW On-off touchless dimmer switch with 2000mm cord

Type Code Model Setup and functions

A

1758401 CALL ME V17 Single-channel dimmer remote control (white)

1758403 CALL ME V17 Single-channel dimmer remote control (black)

1758410 CALL ME V17 Single-channel dimmer remote control (aluminium)

1758419 CALL ME V17 Single-channel dimmer remote control (steel)

B 1758201 RC3 Multi-channel (up to three) dimmer remote control

passive infrared sensorPIR-XD

Recessed installation Surface installationwith holder separately soldCode: 3055401


1758901/S PIR-XD DPS On-off presence sensor with 2000mm cord

Under cabinet installationIR-XD DSW


X-DRIVER

IR-XD3

DXD3-IR

P

Infra-red sensor with limit switch function


IR-XD Infra-red sensor with limit switch function

Distributor for X-DRIVER sensor outputs


DXD3-IR Distributor that multiplies the X-DRIVER sensor outputs

DXD3-IR is a special distributor for power supply units in the X-DRIVER collection, used to multiply the sensor outputs up to 6 IR-XD3. Designed with 3 slots, it is supplied with a connection cable. The IR-XD3 infra-red sensors with limit switch function are supplied (separately) with 2000 mm cable and connector.

IR-XD3 is an infra-red sensor with limit switch function wired for connection to the DXD3-IR distributor. The sensor switches the luminaires connected to X-DRIVER on and off when the door on the unit on which it is mounted is opened or closed. In addition to recessed installation in a 10 mm hole it can also be installed “flush to the door” thanks to the special sensor design with rear diodes.

PRODUCT PREVIEW. PROVISIONAL TECHNICAL AND PHOTOMETRIC DATA.

X-DRIVER · 2020-02-20 · 62 X-DRIVER X-DRIVER The new smart X-DRIVER LED converter, available in...

Documents

Transcript of X-DRIVER · 2020-02-20 · 62 X-DRIVER X-DRIVER The new smart X-DRIVER LED converter, available in...