WP2 - Main Results: Regulatory Aspects and Improved Test Procedures
2
INGAS General Assembly, Graz 22&23 March 2012 INGAS INtegrated GAS Powertrain WP2 - Main Results: Regulatory Aspects and Improved Test Procedures extensive testing of the new InGAS pressure vessel design by XPERION including: static fatigue tests, cyclic fatigue test up to 100.000 load cycles, Development of new residual strength test methodology based on amplified strength degradation at very slow pressurization rate tests Validation of AE – testing methodology for QM Identification and discussion of gaps and uncertainties in the current ECE regulation R110 1 SP-B1 “Gas storage for CNG engines” bullet - penetration AE - testing burst with different pressurization rates fire engulfment
description
SP-B1 “Gas storage for CNG engines”. WP2 - Main Results: Regulatory Aspects and Improved Test Procedures extensive testing of the new InGAS pressure vessel design by XPERION including: static fatigue tests, cyclic fatigue test up to 100.000 load cycles, - PowerPoint PPT Presentation
Transcript of WP2 - Main Results: Regulatory Aspects and Improved Test Procedures
INGAS General Assembly, Graz 22&23 March 2012
INGAS INtegrated GAS Powertrain
WP2 - Main Results: Regulatory Aspects and Improved Test Proceduresextensive testing of the new InGAS pressure vessel design by XPERIONincluding: static fatigue tests, cyclic fatigue test up to 100.000 load cycles,
Development of new residual strength test methodology based on amplified strength degradation at very slow pressurization rate testsValidation of AE – testing methodology for QMIdentification and discussion of gaps and uncertainties in the current ECE regulation R110
1
SP-B1 “Gas storage for CNG engines”
bullet - penetration
AE - testing
burst with different pressurization rates
fire engulfment
INGAS General Assembly, Graz 22&23 March 2012
INGAS INtegrated GAS Powertrain
Dissemination of Foreground
2
SP-B1 “Gas storage for CNG engines”
Testing Methodology:Research on RC&S for Hydrogen Storage Relevant to transport and Vehicle issues with special focus on Composite Containments, P. Pöschko, G. MairInternational Conference on Hydrogen Safety, 9/12/2011
AE – Methodology for QM:Überwachung der Fertigungsqualität von Faserverbund-Druckbehälternmittels Schallemissionsprüfung, E. Duffner, J. Bohse, C. GregorKolloquium Schallemission der DGZfP in Wetzlar vom 27. - 28. Oktober 2011
