Working Energy Commitment June 2013. Presentation Outline Introduction to PSAC Working Energy...
-
Upload
noelle-oxman -
Category
Documents
-
view
216 -
download
1
Transcript of Working Energy Commitment June 2013. Presentation Outline Introduction to PSAC Working Energy...
Working Energy Commitment
June 2013
Presentation Outline
• Introduction to PSAC• Working Energy Commitment• Hydraulic Fracturing Overview• Public Engagement
Photo: Trican Well Service
Petroleum Services Association of Canada (PSAC)
• National trade association representing the service, supply and manufacturing sectors within the upstream petroleum industry.
• Close to 260 member companies, employing more than 80,000 people and contracting almost exclusively to oil and gas exploration and production companies.
Industry Responsibility & Authority
Service Sector Producer Sector
• Contract to producers• Innovate and provide
specialized services, technologies and equipment for preparing, drilling, completing, testing, maintaining and abandoning oil and gas wells, and reclaiming lease sites
• AKA operators• Explore for oil and gas• Negotiate for land access
and mineral rights• Contract services as
needed• Oversee operations on
their leases
PSAC is Working Energy
Goals
• Communicate the commitment of our members to listen to and openly discuss public concerns about oil and gas development; and
• Draw attention to the efforts our members put into mitigating the risk to health, safety and environmental impacts associated with their operations.
Working Energy Commitment
Working Energy Commitment Founding Members
Working Energy Commitment Statement of Principles
• Operate safely and responsibly• Meet or exceed all environmental
standards• Act with integrity• Continually improve our
practices and services• Treat all members of the community
with respect, dignity and trust
Hydraulic Fracturing Overview
Photo: Trican Well Service
60 Years of Hydraulic Fracturing
Photo: Halliburton
Hydraulic Fracturing Today
• R&D centres• Scientific protocols• Environmentally friendly chemistries• Simulators to map out hydraulic fracturing operations• Equipment to reduce wellsite footprint• Real-time micro seismic monitoring and interpretation
Graphic: Halliburton
Exploration in Alberta
Map: ERCB
Hydraulic Fracturing Purpose
Graphic: CSUR
Hydraulic Fracturing Process
• Pump fluid into a wellbore to create enough pressure to crack, or fracture, the rock layer
• Causes existing fractures to open or new fractures to be created
• Proppant, usually sand or ceramics, helps keep the fractures open to allow oil and gas to flow to the well
Many Steps in Hydraulic Fracturing
Graphic: Trican Well Service
Many Steps in Hydraulic Fracturing
Graphic: ERCB
Horizontal Drilling and Multistage Fracturing
Graphic: ERCB
Hydraulic Fracturing Animation
Video: Imperial Oil
Typical Fracture Fluid Composition
Graphic: BC Oil & Gas Commission
Fracture Fluid Disclosure – fracfocus.ca
Alberta Energy Regulator (AER)
Public Engagement Spring/Summer 2013• Drayton Valley, AB• Lethbridge, AB• Grande Prairie, AB• Dawson Creek, BC• Red Deer, AB• Medicine Hat, AB
Service Sector Hydraulic Fracturing Code of Conduct
Health, Safety & the Environment
Technology & Innovation
Stakeholder Communication
Respect for Communities
Working Energy Commitmentwww.workingenergy.ca