Working Drawing Check List
-
Upload
christof-van-wyk -
Category
Documents
-
view
227 -
download
0
Transcript of Working Drawing Check List
-
8/13/2019 Working Drawing Check List
1/12
1
EKURHULENI METROPOLITAN MUNICIPALITYBUILDING DEVELOPMENT SECTION
WORKING DRAWING CHECK LIST
LIST DRAWINGS TO BE PROVIDED
Site plan
Floor plans
Foundation plan
Ceiling plan
Roof plan
Sewer and storm water layout plan
Sewer elevations
Electrical layout plan
Water layout plan
Elevations
SectionsConstruction details
Window and door details
Bathroom, Sluice room and Toilet layouts
Kitchen layouts
Shelving and cupboard details
Joinery details
Window schedule
Shop front schedule
Door schedule
Finishing scheduleSanitary schedule
Exterior specifications
GENERAL INFORMATION TO APPEAR ON ALL DRAWINGS
Title block
Consultants data (name, address and tel. nos)
Clients data
Project name
Project address and stand number
Project number
Drawing numberScales
Date
Drawn block
Approved block
Revisions column with date column
General instructions to contractor
North point (pointing upward)
Orientation block plan
Drawing title with scale adjacent
Module linesNo loose furniture, shading or colouring to appear on working drawings
Minimum height of text to be 2mm
-
8/13/2019 Working Drawing Check List
2/12
2
SITE PLAN (Scale 1 in 500 or 1 in 200)
Drawing list
Boundary dimensions
Detailed stand description
Position and description of all adjoining sites
Adjoining streets and roads (Names and widths)
Adjoining sidewalks and kerbs (position and width)
Existing elements on sidewalks (Trees, electrical mini subs, poles, manholes, storm waterinlets etc.)
Servitudes (description and width)
Building line & distance to boundary
Footprint of all new buildings with names and floor levels
Bench mark (position, level and full description)
Setting out points and distances of new buildings to nearest site boundary lines andexisting buildings
New paved areas, walkways, aprons, etc. (Materials, dimensions, etc.)Existing buildings and paved areas (names and levels)
Refuse removal areas + levels
Parking layout with dimensions, radii, kerbs, finishes, parking bay numbers
Position, dimensions and description of entrance
Gates (width and description)
Boundary fences and walls (new and existing, description and height)
Free standing walls and fences on site (New and existing, height and description)
Fences and walls to be removed or demolished
Trenches to be filled
Roads and paving to be removedTemporary roads and fencing
All existing elements on site (Trees, electrical mini subs, poles, manholes, storm waterinlets etc.)
Contours (existing)
New ground levels (excavated and filled)
Level changes (embankments, stairs, ramps, berms, retaining walls, etc.show levelsand describe materials.)
All existing services on site (Sewer lines, electrical cables, manholes, storm water drains,water lines, telephone lines, poles, etc.)
Sewer layout with manholes, GL, IL and D, ies, ces, gullys, pipe sizes, falls etc.
Municipal sewer (Position, direction of fall, sewer connection)Storm water layout (manholes, inlets, catch pits, pipe sizes, materials, falls, levels,outlets, connections etc.)
Site water layout (Water connection, pipe sizes, position and description of fire hydrantsand garden taps)
New trees (description, and drip line circumference of tree in mature state)
Existing trees (Position, and drip line circumference )
Trees to be removed (Position and trunk diameter)
-
8/13/2019 Working Drawing Check List
3/12
-
8/13/2019 Working Drawing Check List
4/12
4
CEILING PLAN (Scale 1 in 100 and 1 in 50)
Wall thicknesses
Chimneys and service ducts
Lintels
Truss and rafter lines
Width and direction of gypsum and fibre cement ceilings
Grid lines for suspended ceilings
Ceiling hatchesdescription and size
Position of geyser
Ceiling specification
Ceiling details
Section lines
ROOF PLAN (Scale 1 in 100 1 in 50)
Position of walls
Position of gables and parapets
Position of chimneys and service ductsDimensions of overhangs
Directions of falls
Gutters
Rain water down pipes
Trusses, beams and purlins with centreline distances
Position of geyser
Position of flashings ridges and valleys
Description of roof structure
Description of isolation
Specification of roof coveringSpecification of water proofing
Section lines
Reference symbols to details
SEWER AND STORM WATER LAYOUT PLAN (Scales 1 in 100 1 in 50)
Description, position and direction of fall of Municipal sewer line
Description, position and depth of municipal sewer connection
Position of all sanitary appliances
Sewer Layout
Sewer line levels (ground level, invert level and depth)
All wastewater pipesSewer Pipe dimensions and description
Sewer falls
Ramp pipes
Position, size and levels of manholes
Ventilation pipes
Anti siphon pipes
Gullies
Grease traps
Cleaning eyes
Inspection eyesFrench drains
Septic tanks
Storm water layout
-
8/13/2019 Working Drawing Check List
5/12
5
Storm water pipe dimensions and description
Storm water connection (position and depth)
Storm water levels
Catch pits (position, size and levels)
SEWER ELEVATIONS (Scales 1 in 100 1 in 50)
Description, position and direction of fall of Municipal sewer line
Description, position and depth of municipal sewer connection
Position of all sanitary appliances
Sewer Layout
Sewer line levels (ground level, invert level and depth)
All wastewater pipes
Sewer Pipe dimensions and description
Sewer falls
Ramp pipes
Position, size and levels of manholes
Ventilation pipes
Anti siphon pipesGullies
Grease traps
Cleaning eyes
Inspection eyes
French drains
Septic tanks
ELECTRICAL LAYOUT PLAN (Scale 1 in 100 1 in 50)
Symbols key diagram
Light points (for ordinary and waterproof fittings)Light points (fluorescent)
Light switches (single, two way and pull)
Power skirtings (position and description)
Power points (low and high with heights above finished floor level)
Stove connection
Geyser connection
Floor, wall and ceiling mounted heaters
Distribution and sub-distribution boards
Electrical connection point position of meter
Position of supply cable
Position of sleevesTelephone points and connection
Television points and position of arial
Door alarms and bells
Communication system
Site lighting
Time switches
Incinerator connections
Extraction fan connections
Shaving connections
Schedule of fittings
-
8/13/2019 Working Drawing Check List
6/12
6
WATER LAYOUT PLAN (Scale 1 in 10 1 in 50)
Water meter and connection point (position and size)
Reticulation over site (pipe sizes)
Garden and other outside taps
Fire hydrants (position and size)
Swimming pool or fountain supply
Reticulation in building (pipe sizes)
Supply to reservoirs, tanks and pressure tanks
Supply to geyser
Reticulation of hot water from geyser
Fire hose reels (position and size)
Closing valves
Taps
Pressure reducing valves
One way valves
Pressure valves
ELEVATIONS (Scales 1 in 100 - 1 in 50)
Module lines
Natural ground level
Excavated ground level
Back filled ground level
Floor levels at level changes, stairs, ramps, inside and outside (top of concrete TOC)
Show height of floor above ground level
Lintel levels
Top of slab levels
Soffit of slab levelsTop of beam levels
Soffit of beam levels
Landing levels
Wall plate level
Foundation walls
Windows (indicate opening sections and show cills)
Lintels
Doors
Other openings and height references
Air bricks, grills and louvres
Thresholds, stairs and rampsPodiums, platforms berms, retaining walls, screen walls etc, (show and describe )
Verandas and pergolas
Roof finishes and flashings (describe)
Parapets and copings (describe)
Fascias and barge boards (show and describe)
Rainwater gutters and down pipes (show and describe)
Expansion joints
Wall finishes
-
8/13/2019 Working Drawing Check List
7/12
7
SECTIONS (Scale 1 in 100 1 in 50 1 in 20))
Natural ground level
Excavated ground level
Back filled ground level
Floors with levels, inside and outside (top of concrete TOC)
Stairs and ramps
Show height of floor above ground levelShow height from FFL to underside of ceiling
Lintel levels
Top of slab levels
Soffit of slab levels
Top of beam levels
Soffit of beam levels
Landing levels
Wall plate level
Foundations (min 255 x 600mm)
Foundation walls (min 220 mm)Consolidated fill
Hardcore fill
Damp proof membrane (describe)
Concrete bed
Screed
Brick walls
Slabs and beams
Damp proof courses at floor and window cill level
Room names and numbers
Wall finishes
Tile lines and dado heights
Window and door openings
Thresholds
Sanitary ware in elevation (name)
Window cills (describe)
Door and window lintels (describe)
Wall plate (Size and description)
Beam filling
Ceiling (describe material, thickness, fixing and finish)
Ceiling brandering (describe material, spacing, size and fixing)
Roof insulationRoof truss (material, spacing, fixing and sizes of rafters, tie beams, struts and posts)
Purlins and battens (describe material, spacing, size and fixing
Flashings and counter flashings (describe)
Parapets and side walls (show vertical height above roof finish)
Copings (show and describe)
Flat roof water proofing (screed, waterproofing material, fixing and finishing)
Roof insulation (material, size and fixing)
Roof finish (material, size and fixing)
Rain water gutters and downpipes (material and sizes)
Sections through concrete beams, slabs, stairs and landingsReferrals to details and detailed sections
Hatching to SABS
-
8/13/2019 Working Drawing Check List
8/12
8
CONSTRUCTION DETAILS (Scale 1 in 10 1 in 5)
Foundation and wall details showing fill, hardcore, dpm, bed, screed skirting and plaster
Cill details showing brickwork, outer cill, inner cill, dpc and plaster
Lintel details showing brickwork and plaster
Beam and slab details showing brickwork, screed, floor finish and plaster
Eaves details showing brandering, ceiling, cornice, wall plate, beam filling, rafters, purlins,battens, tilting batten, underlay, roof tiles/sheeting, fascia, gutter
Verge details showing rafters, purlins/battens, underlay, roof tiles/sheeting, barge board
Ridge details showing rafters, purlins/battens, underlay, roof tiles/sheeting, ridge tile,ridge flashing, serrated closers, sealing strips
Valley details showing rafters, purlins/battens, underlay, roof tiles/sheeting, valley gutter
Hip details showing rafters, purlins/battens, underlay, roof tiles/sheeting, hip tile
Top and side parapet details showing brickwork, rafters, purlins/battens, underlay, rooftiles/sheeting, flashing, counter flashing, serrated closers, sealers, concealed gutter
Box gutter details showing brickwork, timberwork and sheet metal work, dimensions
Stair details showing brickwork, concrete, plaster, screed, floor finish, balustrade with
handrail, bottom rail and stiles, dimensions of risers, treads and handrail
BATHROOM/SLUICE ROOM/TOILET LAYOUTS (Scale 1 in 20)
Detailed plans
Wall thicknesses
Plaster
Floor tile layout
Sanitary equipment in plan and to scale
Windows in plan with cills
Doors in plan with door swings and frames
Sewer and waste water pipes in plan and to scale
Position of mirrors in plan
Toilet roll holders, trowel rails, towel roll holders, electric hand driers, sanitary padutensils, soap holders, soap dispensers, disposal bins in plan
Horizontal dimensions
Section lines and arrows
Detailed sectional elevations
Wall thicknesses, plaster and ceiling lines
Windows in elevation
Doors in elevation
Wall tiles in elevationSanitary equipment in elevation and to scale
Sewer and waste pipes in elevation and to scale
Mirrors in elevation showing position and size
Toilet roll holders, towel roll holders, electric hand driers, sanitary pad utensils, soapdispensers, disposal bins in elevation
Vertical dimensions
-
8/13/2019 Working Drawing Check List
9/12
9
KITCHEN LAYOUTS (Scale 1 in 20)
Detailed plans
Wall thicknesses
Plaster
Floor tile layout
Kitchen cupboards, stove, sink and fridge in plan and to scale
Kitchen cupboard codes
Windows in plan with cills
Doors in plan with door swings and frames
Sewer and waste water pipes in plan and to scale
Horizontal dimensions
Section lines and arrows
Detailed sectional elevations
Wall thicknesses, plaster and ceiling lines
Windows in elevation
Doors in elevation
Wall tiles in elevationKitchen cupboards, stove, sink and fridge in elevation and to scale
Sewer and waste pipes in elevation and to scale
Kitchen cupboard codes
Kitchen cupboard specifications
Vertical dimensions
SHELVING LAYOUT (Scale 1 in 20)
Detailed plans of storage areas
Wall thicknesses
PlasterShelving in plan and to scale
Windows in plan with cills
Doors in plan with door swings and frames
Horizontal dimensions
Section lines and arrows
Detailed sectional elevations of storage areas
Wall thicknesses, plaster and ceiling lines
Windows in elevation
Doors in elevation
Shelving in elevation and to scale
Shelving in section and to scaleVertical dimensions
Brackets, fixing details, etc
Shelving specification (material and finishes)
JOINERY DETAILS ( Scale 1 in 10 1 in 5 - 1 in 2)
Plans of joinery items
Elevations of joinery items
Large scale detail sections
Horizontal and vertical dimensions
Description of material, fixing methodsDescription of any ironmongery like handles, rails, drawer slides etc
Description of finishes
-
8/13/2019 Working Drawing Check List
10/12
10
WINDOW SCHEDULE (Scale 1 in 50 1 in 20)
Reference number
Number of windows
Drawing - Indicating unfinished floor level, fixed and opening sections and swing
DimensionsIndicating window size and lintel height above TOC
Description - Indicating material, profile type and profile size of frame and burglar bars,gauze and fixed louvres
Ironmongery - Indicating handles, stays, hinges etc.
GlazingIndicating type and thickness of glass, fixing method and type of opacity
FinishesIndicating factory finish, undercoat, final coats and colour of paint
SHOP FRONT SCHEDULE (Scale 1 in 50 1 in 20)
Reference number
Number of shop front units
Elevation - Indicating FFL, fixed and opening sections and indicating swing
Sections and plans if needed
DimensionsIndicating all sizes and heightsDescriptionDescribing material, profile type and profile size of frames, doors andopening sections, position of opaque panels etc
Ironmongery - Indicating handles, stays, hinges, door closers etc
GlazingIndicating type and thickness of glass, fixing method and type of opacity
FinishesIndicating factory finish, undercoat, final coats and colour of finish
DOOR SCHEDULE (Scale 1 in 50 1 in 20)
Reference number
Number of doors indicating LH or RH door swings
ElevationShowing door frame, door, glazing, louvers, fanlights kick plates, TOC andFFL
Section and plan if needed
DimensionsIndicating size of frame, size of door, height above TOC, size of insets, kickplates, louvers, glazed panels, fanlights, size of bottom gap in toilet doors etc.
Description of frameDescribing material, type and size of profile, number of rebates,sidelights, fanlights, striking plate
Description of doorDescribing material, construction method, sizes of stiles, rails,braces, lock blocks, door thickness, weather bar, door leaves, veneer, cover strips,rebates, kick plates
GlazingIndicating type and thickness of glass in sidelights, fanlights, and glazed insetsin doors, method of fixing
IronmongeryDescribing locks and lock sets, door handles, hinges, door closers, slidingbolts, door stops, name plates, indicator bolts, signage, sliding rails, panic bolts, masterkeys, clothes hooks
Finish on frameIndicating factory finish, undercoat, top coats
Finish on doors - Indicating factory finish, undercoat, top coats
-
8/13/2019 Working Drawing Check List
11/12
11
FINISHING SCHEDULE
Column indicating all rooms and interior spaces
Differentiate between floors and separate buildings
FloorsDescribe type of fill, hardcore, damp proof membrane, ant poisoning, concretebed, screed, floor finish, floor tiles, carpet, colour, skirtings
WallsDescribe one or two coat plaster, undercoat, paint coats, wall tiles, specialfinishes, colours, curtain rails
Window cillsDescribe materials and method of laying of inside and outside cills
CeilingsDescribe material, method of fixing, cover strips, cornices, insulation, finish,colours
SANITARY SCHEDULE
Column indicating all rooms and interior spaces
Differentiate between floors and separate buildings
Sinks - Name, catalogue no, size, material, fixing method, taps, traps, plugs, pipe sizes,stop cocks
Wash troughs - Name, catalogue no, size, material, fixing method, taps, traps, plugs, pipesizes, stop cocks
Wash hand basins - Name, catalogue no, size, material, fixing method, taps, traps, plugs,pipe sizes, stop cocks
Showers - Name, catalogue no, size, material, fixing method, taps, traps, plugs, pipesizes shower roses
Baths - Name, catalogue no, size, material, fixing method, taps, traps, plugs, pipe sizes ,stop cocks
Water closets - Name, catalogue no, size, material, fixing method, flush valves flushpipes, cisterns, direction of S bend, pipe sizes, stop cocks
Urinals - Name, catalogue no, size, material, fixing method, flush valves flush pipes,
cisterns, traps, pipe sizes, stop cocksBidets and squat pans - Name, catalogue no, size, material, fixing method, flush valvesflush pipes, cisterns, traps, pipe sizes, stop cocks
Laboratory sinks - Name, catalogue no, size, material, fixing method, taps, traps, plugs,pipe sizes, stop cocks
Sanitary pad bins and incinerators
Toilet roll holders
Soap dispensers
Towel roll holders
Mounted bins
Electrical hand driersMirrors
Soap holders
Clothes hooks
-
8/13/2019 Working Drawing Check List
12/12