Christy L. ColemanWork Samples4243 Monroe StApt 1/8L.A., C.A. 90029646.528.5260Christy.Coleman@gmail.com

Christy L. Coleman

Southern California Institute of Architecture, L.A., California; 09/2009Education

Skidmore College, Saratoga Springs, NY; 05/1999Major: American Studies (GPA 3.4). Department honors earned with completion of 70-page thesis. Minors: Studio Art, Anthropology

M. ARCH 1

• Drew Construction Documents for residential projects in Hollywood and for an artist’s studio space in Culver City, C.A.• Built physical model for residential project in Santa Monica. Model was used in meetings with the Landmarks Commission and Santa Monica City Council.• Assisted with schematic designs and drew plans and elevations for an “off-the-grid” house.

• Co-founded a furniture design collective which aims to design fl exible furniture for urban lifestyles.• Liased with fabricators to produce large and small scale furniture objects.• Designed marketing materials including website (www.everyspacedesign.com), press kits, design show exhibition booths at BrooklynDesigns 2005 and 2006.• Everyspace showed at BrooklynDesigns 2005 & 2006 and at Caboom 2007.

ExperienceOffi ce • Assisted with a design competition for Guiyang Huaxi, China which was initiated by MAD Architects. Responsibilities includ-

ed: researching building typology, generating drawings, producing laser cut and 3-D print models, as well as fi nal presentation boards. • Assisted with current proposal for civic center in Malpensa, Italy. Responsibilities included: 3-D modeling and elevating pre-existing physical models to presentation quality. • Oversaw solo exhibition of Elena Manferdini: Works in Progress at the Italian Institute of Culture. Responsibilities included: managing all aspects of the show such as exhibition design/layout, budgets, exhibit installation, and the design and layout of the exhibition catalogue. • Produced technical drawings for the fabrication of a necklace commissioned by Bulgari. • Assisted with and co-created designs for a tabletop line for Alessi. Responsible for engineering the design for maximum effi ciency in terms of material and production costs. Assisted with several rounds of design development. Produced 3-D prints as well as laser cut study models. Generated technical drawings which were sent to Italy for production. • Created the pattern for a stool carried by Arktura. The stool is currently in the permanent collection at LACMA. Worked through several rounds of design development to modify design and increase material and cost effi ciencies. Produced several study models and technical drawings.

Atelier Manferdini, Venice, California; Intern; 05/2008 - 01/2009

Taalman Koch Architects, Los Angeles, California; Intern; Summer 2007

Everyspace, Brooklyn, New York; Co-Founder; 04/2004 - Current

Fabrication: CNC Mill, Laser cutting, 3-D printing

ONRamp 2009 (SCI-ARC publication of selected student works), Apartmenttherapy.com featured Everyspace (April 2007), ReadyMade featured Everyspace (January 2007), Fine Furnishings International featured Connect Seating (July/Aug 2006), Interior Design Magazine featured Pivot Table (April 2006), JANE Magazine featured Pivot Table (September 2005), BKLYN Magazine featured Pivot Table (Fall 2005), Design*Sponge featured several Everyspace products (May, 2005)

Skills

Press

Awards Gratuated from SCI-Arc with a Service Merit Distinction, ScholarshipSelected to represent SCI-Arc at the “House as Manifesto” workshop in Austria SCI-Arc Thesis Scholarship 2009SCI-Arc Scholarship 2008

Software: Maya, AutoCAD, Rhino, Adobe Illustrator, Adobe Photoshop, Adobe InDesign, Adobe After Effects, Flash, Mental Ray, Maxwell, Magics, and Surfcam

4243 Monroe Street; APT 1/8; L.A., CA 90029 Christy.Coleman@gmail.com 646.528.5260

Relevant Courses: Six Semesters of Design Studios, Materials, Properties and Structural Process, Structures I, Structures II, Design Development, Advanced Building Systems, Sustainability, Urban Geography, Planning and Real Estate, Tempering the Environment, Strategies of Representation I, Strategies of Representation II, Strategies of Representation III, Strategies of Representation IV, Architectural Culture I, Architectural Culture II, Introduction to Tectonics, Building Component Design & Fabrication, Casting and Mold-making

Manager, Product Marketing: Reporting to the Director of Marketing; 09/2004- 04/2006• Acted as liaison between clients, sales and internal departments such as Finance, Editorial and Product Development to create high-yielding, effective advertising programs ($150,000+).• Developed ad products, such as themed packages and the sponsorship of editorial promotions, which leveraged new inventory opportunities thereby generating incremental revenue, 2005 forecast was 15%.• Created sales proposals (valued at $5M) and attained internal approvals for large strategic partnerships with clients.• Responsible for About’s trade marketing efforts including events, general presentation, sell sheets and all trade marketing events.Director, Client Services: Reporting to VP of Sales Operations; 05/2002 - 09/2004• Effectively developed the operational workfl ow for Client Services and various departments in the company - proven by the reduction of our in-house spill rate from 13% to less than 3%.• Created sales marketing materials for About and Sprinks: writing and designing About.com’s general presentation, sales pitches and internal/external sales materials.• Creative problem solving to secure revenue, ensure client satisfaction and increase customer retention.• Managed a team of fi ve: three Client Service Account Managers and two Account Coordinators.

The New York Times Company, About, Inc., NYC, New York; 05/2000 - 02/2006

Assembled physical model of the site and the installation for structural analysis by Burro Happold. Assisted with the fabrication and assembly of a several hundred part aluminum installation.

Assisted with the installation by grounding and securing 30-foot structural tripods using a jackhammer; earth anchors and steel cables; lifting canopy with “cherry-picker” and attaching it to structural members and connecting and fastening over 200 customized Mylar pieces.

Installations Architecture programs from around the world were invited to represent their school with an installation. Responsibilities in-cluded: all material research, management of the fabrication team and all aspects of fabrication.

Assisted with the assembly of components according to precise location in the canopy. Responsible for quality checking and detecting errors ahead of scheduled implementation.

Beyond Media – Elena Manferdini & Alexis Rochas, Florence, Italy; 06/2009

Merletti – Elena Manferdini, SCI-Arc Gallery, Los Angeles, California; 03/2008

Droopscape – Ball and Nogues, Coachella, California; 05/2007

Dragonfl y – Emergent, SCI-Arc Gallery, Los Angeles, California; 04/2007

Experience

• Managed day-to-day museum activities including greeting visitors, answering phones, keeping the patron fi les updated.• Assisted with the management of the museum’s permanent collection. • Assisted with the design and installation of a museum exhibit.

Rennselear County Historical Society, Troy, NY; Intern; 01/1999 - 07/1999

Children’s Museum at Saratoga, Saratoga Springs, NY; Intern; 01/1997 - 05/1997

Smithsonian Institute, Washington D.C.; Intern; 05/1997- 08/1997• Conducting historical research for two research fellows at the National Museum of American History (NMAH) which required many hours of independent research at the Library of Congress. • Conducting orientation for incoming interns.• Organizing and coordinating activities for incoming interns. Was required to be familiar with each internal department, give tours of the “behind the scenes” at the museum, arrange an interdepartmental lecture series, and design all communication of events to the incoming interns.

• Planned, developed and implemented educational programs for children, as well as, conducted museum orientation for the public.• Managing day-to-day museum activities.

Experience Offi ce Con’t

Unravelled: Between Field and Figure

Above: Snapshots of Riemann grid deformation

Above: Planametric view of fi sh deformation based on grid

Above: Elevation view of fi sh deformation based on grid

Architecture has a controversial relationship with fi guration and these fl uc-tuations can be traced throughout history. From the fl oral patterns of early Islamic mosques to the ornamentation and embellishment of Greek Col-umns, the fi gure has been ingrained into architectural design. Opposing opinions about the role of fi guration in architecture were made mainstream with Modernist ideals and it was Aldof Loos’s text “Crime and Ornament” that solidifi ed and codifi ed these opinions. Through the Modernist Movement, Loos’s legacy yielded concrete struc-tures devoid of ornamentation and fi guration which meant offi ce buildings and residential apartments were often times indistinguishable from one another. It is precisely this discrepancy between form and symbol that prompted the Postmodern Movement to begin encoding notations into the building’s skin, giving users and viewers an understanding of the building’s function at fi rst sight. This movement was commonly referred to as “anti-intellectual” by scholars and “the duck” or “decorated shed” were ultimately dismissed as one liners. Today, there are new attitudes emerging about

fi guration and its potential to determine an entirely new territory for archi-tecture. This thesis aimed to investigate the role of aggregation in invigorating fi gu-ration and moving it away from its common criticism of being only a surface treatment or an iconic object. By using aggregation, fi eld and fi gure will blend such that the viewer will understand that the object – in this case the fi sh – is at once a distinctly independent object and an integral part of the whole unit. Simultaneously shifting the scale of the fi sh from that of a brick to that of a room will also make the fi gure disappear and reappear. This thesis argues that this logic will be the next movement in fi guration. With the ability of the unit to oscillate from an indistinguishable object, a fi eld condition, to a distinguished fi gure or part of the whole – will come infi nite possibilities for fi guration to reemerge with more complexity.

Skills: 3-D Maya modeling, Maya Animations, Maxwell and Mental Ray Renders, Rhino, Adobe Photoshop, Adobe Illustrator, 3-D print models, CNC milled models, Vacuum form models

Above: Bird’s-Eye view of pavillion. Above: View of exhibition display.

Above: Interior view of front entrance.

Above: View of front entrance.

Above: Physical model showing a detailed portion of the nnn render. It is a double-sided CNC mill approximately 3’x2’ in size.

Berkley Museum of Art: OverviewWhile Toyo Ito won the bid to design a new home for the Berkley Museum of Art, this studio focused on designing a new museum that created in-novative solutions for lighting, museum display, circulation and structural systems. The below diagrams are early studies of lighting and circulation.

Working in teams of two, we were challenged to accommodate the com-plex program of an art museum, while simultaneously integrating the build-ing into the site context. This project was selected by SCI-Arc faculty to advance to design development. While in design development, we not

only articulated detail conditions of the building, but we also analyzed the building in terms of its environmental sustainability. Additionally, we were challenged to rationalize a portion of the design. The diagrams at the bot-tom right show the variance between actual non planar panels and panels once they were rationalized and made planar.

Skills: 3-D Maya Modeling, Maxwell Rendering, Rhino, Adobe Photo-shop, Adobe Illustrator, 3-D print models, CNC milling, laser cutting, and vacuum forming

Above: Bird’s-Eye view.

Above: Site Plan

Bancroft Way

Durant Ave

College A

ve

Bow

ditch Ave

Above: View of entrance from the street. Diagram showing rationalized panalization of portion of building.

Berkley Museum of Art: Drawings

Above: Ground Floor Plan

Above: East Elevation

Lobby

Offi ces

AuditoriumExhibition Space

S1

S2

S1

S2

Above: Section 1

Above: Section 2

A B C D GFE

A B C D GFE

A B C D GFE

A B C D GFE

Berkley Museum of Art: Construction Details

Building Skin

Primary StructureSteel Frame Secondary Structure Monocoque Plugins Steel Frame and Monocoque Plugins

Exploded Axon of Structural System

Glazing

Framework for Panels

Panalization of Monocoque Shell

Monocoque Shell

Exploded Axon of Monocoque Shell

Exterior Skin

Roof System: Insulation, Metal Decking, Roof Brackets, Ceiling

Composite Sandwich

Bracket System to Sup-port Roof

Floorplates

Exploded Axon of Portion of Building

Interior Fiberglass Panels

Secondary Structural Members

Foam

Exterior Fiberglass Panel

Neoprene Sealant

Sealant

Plan cut through composite shell

Section

Exterior Aluminum Cladding

Waterproofi ng Membrane

Rigid Insulation

Metal Decking

Structural Steel

Fiberglass Strip Bolted to Structure

Fiberglass Panels

Vapor Retardant

Interior Aluminum Cladding

Sealant

Foam

Music Conservatory: OverviewThis studio focused on designing a Music Conservatory for Education City, Qatar. Working in groups and utilizing parametric software, we were chal-lenged to design a building that had inherent complexity and created space with interstitiality and pochet.

We used digital projects to create a system of branches that divided space both planometrically and sectionally - as seen in the below diagrams. We

then used these branches to generate multiple building systems such as: circulation, light wells, interior rooms, and creases along the exterior which allow indirect light into spaces.

SKILLS: Maya, Digital Projects, Rhino, Mental Ray & Maxwell Rendering, Adobe Photoshop, Adobe Illustrator, 3-D printing and laser cut models

10.6

9

6.07

6.07

10.6

9

6.07

6.07

9.32

13.9

4

10.6

910

.69

10.6

9

6.07

10.6

9

6.07

3.26

7.43

6.07

1.81

6.07

10.6

910

.69

2.81

6.07

10.6

9

Floor 1 Floor 2 Floor 3 Floor 4 Floor 5

Above: Diagrams illustrate inter-relationships of all builiding componets which were generenated by branching.

Above: Planometric diagrams of branching per fl oor and the resultant spaces created.

Exterior skin and fl oorplates Exterior skin and circulation

Exterior skin and creases Exterior skin, lightwells and creasesExterior skin and lightwells

Exterior skin, fl oorplates and circulation

Section 1 Section 2 Section 3

Above: Sectional diagrams of branching illustrating network of vertical circulation and division of spaces.

Above: Interior circulation with light wells.

Above: View of entrance from street.

Visual Studies: Overview

This visual studies class began in 2-D by deforming a periodic tessellation geometry - as seen in upper image on the right page. We then began working in groups of two to blend the two tessellations together - as seen in the lower image on the right page. We eventually expanded the pattern to include another group of two, thus yielding a “Metamorphosis” pattern. We then designed a unit that incorporated all four designs and created a 3-D print as seen in the rendering below.

Finally, using the line work from the initial two drawings, we created a fl ash website that displayed our work generated in the class. This website is seen below - and as users hover over certain tiles, images of the works reveal themselves.

SKILLS: Maya, Rhino, Maxwell Rendering, Mental Ray, Magics, Adobe Photoshop, Adobe Illustrator, Flash, and 3-D print models

Above: Rendering of four distinct modules combined and eventually 3-D printed.

Above: Screenshots of fl ash web-site created to show all the work we produced in the course.

Above: Single deformed tesselation.

Above: Combination of two distinct tesellations.

C

M

Y

CM

MY

CY

CMY

K

coverart8_CS2outlines.ai 8/15/2008 2:53:43 PMcoverart8_CS2outlines.ai 8/15/2008 2:53:43 PM

Internship with Elena Manferdini: Overview

Above: Ricami fi nished product.Above: Drawings of Ricami pattern of perforation and panels for production.

Above: Graphic design for cover of exhibition catalogue.

In this internship, I was exposed to numerous industrial design projects such as the Ricami Stool that was designed for Arktura and is shown be-low. The drawing on the left shows the pattern designed for the perfora-tions and how the pattern unfolds to form the stool. To the right of these drawings is the fi nished product which was recently added to the per-menant collection of Los Angeles County Museum of Art (LACMA) and is currently on display there.

In addition to industrial design, this internship provided an opportunity for graphic design. I was responsible for the design and layout of the exhibi-tion catalouge for her solo exhibition Elena Manferdini: Works in Progress.

The drawing at the bottom of this page was used as the cover of the catalogue.

Additionally, I assisted with an architectural competition for a residential tower in Guiyang, China as seen on the opposite page. The shown section was submitted for the competition. Finally, a series of models were pro-duced. Digital fabrication techniques to produce these models included laser cutting and 3-D printing.

SKILLS: Maya, Rhino, AutoCAD, Maxwell Rendering, Mental Ray, Adobe Photoshop, Adobe Illustrator, Adobe InDesign, Magics, 3-D print and laser cut models

Above: Study model of Guiyang Tower.

Above: Section of Guiyang Tower.

Above: Study model of Guiyang Tower- 3-D print. Above: Study model of Guiyang Tower - laser cut.

Internship with Elena Manferdini: IIC Exhibit & Catalogue

Above: Graphic design for exhibition catalogue. Right: Photos of installation

Everyspace Design Collective: Brooklyn Designs ExhibitEstablished in 2004, everyspace is a collective of diverse designers brought together by a similar interest in creating furniture for urban spaces.

After living in New York and other urban areas, we have learned that space is expensive and hard to come by. Everyspace furniture addresses the needs of the urban consumer through fl exibility, function, practical materi-als, comfort and a passion for detail.

From a pivoting side table to elegant stacking chairs to modular storage system that adapts to its environment, each of these pieces was designed

with every space in mind.

Everyspace designers in Brooklyn NY to address urban design issues and to incorporate our philosophy in furniture design, industrial design, exhibit design, graphic design and fi lm making. We are always looking for new design challenges.

SKILLS: AutoCAD, Illustrator, exhibit construction & installation, material rental, materials research, marketing & sales, and graphic design

Above: Photo of installation.

Above: Connect Seating

Above: Pivot Table