WORK PLAN ECE 2017-18 ARYANS GROUP OF COLLEGES · WORK PLAN ECE 2017-18 ARYANS GROUP OF...

WORK PLAN ECE 2017-18

ARYANS GROUP OF COLLEGES,RAJPURA NEAR CHANDIGARH 1

ARYANS GROUP

OF

COLLEGES

WORK PLAN

ECE

(3rd

YEAR)

2017-2018

“We teach, model, and encourage a love of learning,

Collaboration , and compassion for others”



S.NO CONTENT

1 Parameters and Modalities of Assessment

Rules & Regulations

Code of conduct

2 Hostel Rules

Library Rules

Dress code

3 Environmental Awareness

4 List of Holidays

5 Marking Scheme for MST’s & Final Examination

6 Course syllabus Structure



PARAMETERS AND MODALITIES OF ASSESSMENT

This syllabus is subject to any modification if required by the university.

In case a holiday is declared on a day scheduled for a test, it will be rescheduled.

Mid - Semester Examination will be based on syllabus covered till that period of time.

The Question Papers will be based on University(MRS-PTU) Pattern.

Student has to submit his/her assignments as per the prescribed

dates given by the Subject Teacher.

40 Marks (internal) are assigned on the basis of student’s performance in MST’s , assignments, attendance, Class Tests, class

behavior & class presentation.

Marks Distribution is as follows:-

MST’s 12 Marks

Class Assignment 18 Marks

Class Presentation 8 Marks

Attendance 4 Marks Class Test 4 Marks

Class Behavior 4 Marks

Students must clear their dues from

Accounts/Library/Department/Canteen before taking their Admit

Cards.

No Request for any Re-test, Re-consideration of awards shall be entertained.



RULES AND REGULATIONS

Code of Conduct

All the students must ensure that the campus of the Institute

and its facilities are maintained in a neat and clean way.

All the students must strictly abide by the instructions issued

from time to time and conveyed through notice board of the

institute.

Students must be seated in the classroom prior to five minutes

before the schedule time, no student will be allowed to leave

the class, once the teacher is in the classroom.

The academic regulations of the university require a student to

attend 75% of attendance to be eligible to take the examination.

However, it is desirable that all students must attend all the

lecture. Students having attendance 75% and above will be

suitably awarded.

All students must check the notice board and the class bulletin

boards regularly to keep themselves updated about their

academic schedules.

Students are not allowed to loiter unnecessarily in the

institute/computer lab/library/hostel/canteen during class hours,

strict action will be taken if anybody is found guilty.

All students must maintain strict behavioral decency and

discipline .Any such act, which is unbecoming of a student,

may lead to cancellation of his/her seat.

Students should maintain discipline in computer

labs/library/Chemistry lab/class room and take proper care of

equipments/machines in labs. Mishandling/Damage of any

equipment may lead to fine.



All students must follow the college dress code as per

instructions. No cut jeans or fashionable/Casual Dress is not

allowed

Students must carry their Identity/Smart Cards to the institute

everyday and to be produce on demand.

Cigarettes smoking/alcohol/narcotic drugs or consumption of

any alcoholic beverages are strictly prohibited in and around

the ACE premises.

Use of Mobile phones are strictly prohibited

Suspension / Expulsion orders can be implemented with

regards to any student at any point of time on the

following grounds:

Willful violation of any rules & regulations of institute

Misuse of Computer facilities/Cyber crime: Any students

found downloading or browsing any obscene material

shall be liable to strict punishment.

Non-attendance of classes / tutorials as per institute

norms.

Non-payment of institute dues.

Abusive behavior towards peers/juniors/faculty or staff in

the college, sending objectionable emails to faculty and

staff.

No student is allowed to move out of the campus before

4pm.



HOSTEL RULES

A Hostler will have to stay in the room allotted to him or her at the

time of admission.

Inmates of each room are jointly held responsible for the furniture and other things. Any damage to the hostel property is recoverable from them.

Guests/outsiders are strictly prohibited from entering hostel premises without prior permission from the warden.

Once a student has paid and has been allotted hostel room, under no circumstances the money will be refunded.

Students may be expelled from the hostel for violation of rules and regulations, such as theft, ragging and abnormal behavior, use of drugs, alcohol, and indiscipline. A student expelled on disciplinary grounds shall forfeit his/her fees and deposit.

Management reserves the right to reject any applicant’s admission

to the hostel.



LIBRARY RULES

Library membership is compulsory for all the students.

Library membership will be valid for one academic year. Students will

have to get their membership renewed at the beginning of each new

academic year.

One single bar-coded ticket shall be issued to each student for borrowing

books from the library. Student can borrow a maximum of two text books

on that ticket.

Reader library card/Smart card are non-transferable.the student

himself/herself will be responsible for any misuse of his/her card.

Exchanging cards among students is strictly prohibited.

Text Book shall be issued to the students for a maximum period of 7 days.

Request for re-issuing the books will be entertained after one day.

Students would be provided digital & online library facility.

Books marked “NOT TO BE ISSUED”, journals /references, magazines,

newspapers, project reports, audio/video cassettes shall not be issued to

the students. However, they can make use of them in library premises.

Borrowers shall be responsible for the safe return of the books to the

library. While borrowing a book, student must ensure that book is in good

price of the book, if any damage or loss of the book is noticed at the time

of returning the book in the library.

Bags, folders, personal books, magazines, big purses etc. are not allowed

inside the library and are to be kept at property counter.

No book shall be taken away from the reading tables without

permission from the librarian.

Newspapers must not be removed from the newspaper stand.



Scribbling/ underlining on the books is strictly prohibited .Two books at a time will be issued for a maximum period of one week.

When a Student is free from a class he should utilize Library or

Computer lab facilities rather than sitting idle.



DRESS CODE

For Summer For Winter

White Shirt

Grey Blazer/Sweater

Grey Trouser

White Shirt

College Tie & Belt

College Tie & Belt

Formal Black Shoes with Laces

Formal Black Shoes with Laces



ENVIRONMENTAL AWARENESS

1. 8th

March Wednesday International women day

2. 22nd

March Wednesday World Water Day

3. 22nd

April Saturday Earth Day

4. 5th

June Monday World Environmental Day

5. 1-7th

July Saturday-Friday Vanmahotsava Week

6. 11th July Tuesday World Population Day

7. 16th September Saturday International Ozone Day

8. 11th October Wednesday International Girl Child Day

9.

13

th October

Friday

International Day for Natural

Disaster Reduction

10.

24th October

Tuesday

International Day of

Climate Action

11.

7th

November

Tuesday

Infant Protection Day; World Cancer

Awareness Day

12.

1

st December

Friday

World AIDS Day

13.

2

nd December

Saturday

Pollution Prevention Day

14. 10th December

Sunday

Human Rights day



LIST OF HOLIDAYS

S. No. Name of the Holiday(s) Date Day of the week

1 Guru Gobind Singh Jayanti 5th

January Friday

2 Republic Day 26th January Friday

3 Holi 02nd

March Friday

4 Vaisakhi 14th April Saturday



MARKING SCHEME FOR MST & FINAL EXAMINATION

Examination Specifications

MST Pattern :

Max. Marks: 40 Time Allowed: 2 Hours Section A: All Questions will be compulsory

10 Marks

Section B: Attempt only three out of four 30 Marks

Final Examination:

Max. Marks: 60 Time Allowed: 3 Hours

Section A: All Questions will be compulsory 20 Marks

Section B: Attempt only five out of three 20 Marks

Section C: Attempt any two out of three 20 Marks



COURSE STRUCTURE AND TEACHING SCHEME

ECE 6th

Semester



OPERATING SYSTEMS

PART-A 1)Introduction to Operating system, Role of Operating System as resource manager, function

of kernel and shell, operating system structures, views of an operating system. 2) Process management: CPU scheduling, Scheduling Algorithms, PCB, Process

synchronization, Deadlocks, Prevention, Detection and Recovery. 3) Memory Management: Overlays, Memory management policies, Fragmentation and its

types, Partitioned memory managements, Paging, Segmentation, Need of Virtual memories,

Page replacement Algorithms, Concept of Thrashing.

PART-B Device Management: I/O system and secondary storage structure, Device management

policies, Role of I/O traffic controller, scheduler

File Management: File System Architecture, Layered Architecture, Physical and Logical File

Systems, Protection and Security.

Brief study to multiprocessor and distributed operating systems. Case Studies: LINUX / UNIX Operating System and Windows based operating systems.

Suggested Readings/ Books:

1. A Silberschatz and Peter B. Galvin, ―Operating System Concepts" Addison‖ Wesley Publishing Company 2. Dhamdhere, ―Systems Programming & Operating Systems‖ Tata McGraw Hill 3. Gary Nutt, ―Operating Systems Concepts‖, Pearson Education Ltd. 3rd Edition 4. Operating System by Madnick Donovan 5. Operating System by Stallings

MICROWAVE AND RADAR ENGINEERING

Microwave Tubes: Limitations of conventional tubes, construction, operation and properties

of Klystron Amplifier, reflex Klystron, Magnetron, Travelling Wave Tube (TWT), Backward

Wave Oscillator (BWO), Crossed field amplifiers.

Microwave Solid State Devices: Limitation of conventional solid state devices at

Microwaves, Transistors (Bipolar, FET), Diodes (Tunnel, Varactor, PIN), Transferred

Electron Devices (Gunn diode), Avalanche transit time effect (IMPATT, TRAPATT, SBD),

Microwave Amplification by Stimulated Emission of Radiation (MASER).



Microwave Components: Analysis of Microwave components using s-parameters, Junctions

(E, H, Hybrid), Directional coupler, Bends and Corners, Microwave posts, S.S. tuners,

Attenuators, Phase shifter, Ferrite devices (Isolator, Circulator, Gyrator), Cavity resonator,

Matched termination. Microwave Measurements: Power measurements using calorimeters

and bolometers, Measurement of Standing Wave Ratio (SWR), Frequency and wavelength,

Microwave bridges. Introduction to Radar Systems: Basic Principle: Block diagram and

operation of Radar, Radar range Equation, Pulse Repetition Frequency (PRF) and Range

Ambiguities, Applications of Radar. Doppler Radars: Doppler determination of velocity,

Continuous Wave (CW) radar and its limitations, Frequency Modulated Continuous Wave

(FMCW) radar, Basic principle and operation of Moving Target Indicator (MTI) radar, Delay

line cancellers, Blind speeds and staggered PRFs. Scanning and Tracking Techniques:

Various scanning techniques (Horizontal, vertical, spiral, palmer, raster, nodding), Angle

tracking systems (Lobe switching, conical scan, monopulse), Range tracking systems,

Doppler (velocity) tracking systems.

Text books:

1. Microwave devices and circuits: Samuel Liao; PHI 2. Microwave devices and Radar Engg: M. Kulkarni; Umesh Publications 3. Introduction to radar systems: Merill I. Skolnik

4. Foundation of Microwave Engg. : R.E. Collin; McGraw Hill

5. Microwave Engg: K.C Gupta

WIRELESS COMMUNICATION SYSTEM

Introduction: A basic cellular system, performance criteria, operation of cellular systems,

planning a cellular system, analog & digital cellular systems. Examples of Wireless

Communication Systems: Paging Systems, Cordless Telephone Systems, Cellular Telephone

Systems. Blue tooth and Zig Bee.

Elements of Cellular Radio Systems Design: General description of the problem, concept of

frequency reuse channels, co-channel interference reduction factor, desired C/I from a normal

case in an omni directional antenna system, cell splitting, consideration of the components of

cellular systems.

Digital Communication through fading multipath channels: Fading channel and their

characteristics- Channel modeling, Digital signaling over a frequency non selective slowly

fading channel. Concept of diversity branches and signal paths. Combining methods: Selective

diversity combining, Switched combining, maximal ratio combining, Equal gain combining.

Multiple Access Techniques for Wireless Communications: Introduction, Frequency

Division Multiple Access (FDMA), Time Division Multiple Access (TDMA), Spread



Spectrum Multiple Access, Space Division Multiple Access, Packet Radio Protocols; Pure

ALOHA, Slotted ALLOHA.

Wireless Systems & Standards: AMPS and ETACS, United states digital cellular (IS- 54 &

IS 136), Global system for Mobile (GSM): Services, Features, System Architecture, and

Channel Types, Frame Structure for GSM, Speech Processing in GSM, GPRS/EDGE

specifications and features. 3G systems: UMTS & CDMA 2000 standards and specifications.

CDMA Digital standard (IS 95): Frequency and Channel specifications, Forward CDMA

Channel, Reverse CDMA Channel, Wireless Cable Television.

Future trends: 4G mobile techniques, LTE-Advance systems

Recommended Text Books:

1. T.S.Rappaport, Wireless Communications: Principles and Practice, 2nd Edition,

Pearson Education Asia, 2010. 2. William C Y Lee, Mobile Cellular Telecommunications, 2nd Edition, MGH, 2004. 3. Raj Pandya, ―Mobile and Personal Communication systems and services‖, Prentice

Hall of India, 2001. 4. Wireless and Digital Communications; Dr. Kamilo Feher (PHI)

BTEC-603 ENGINEERING ECONOMICS & INDUSTRIAL MANAGEMENT

Cost analysis: Break-even analysis, two and three alternatives, graphical solution.

Breakeven charts, effects of changes in fixed and variable costs. Minimum cost analysis,

economics order quality. Effect of risk and uncertainty on lot size.

Replacement Studies: Reasons for replacement, factors to be considered in replacement

Studies, discounted cash flow analysis, economic life of a project, challenger and

defender.

Economic Analysis Of Investment Alternatives : Basic economy study patterns and their

comparison, decision making in selection of alternative by present worth methods, rate of

return method, payout period method and uniform annual cost method, economic analysis of

new projects, effect of taxation on economic studies.

Cost Estimation : Difference between cost estimation and cost accounting, qualifications

of an estimator. Estimating procedure, Estimate of material cost and labour cost. Estimation of

cost in various manufacturing operations.

Depreciation : Types of depreciation and their Methods.

Concepts of Industrial Management: Concept, Development, application and scope of

Industrial Management , Functions of Management, Evolution of Management Thought :

Taylor’s Scientific Management, Fayol’s,Principles of Management, Douglas Mc-Gregor’s

Theory X and Theory Y, Mayo’s Hawthorne, Experiments, Hertzberg’s Two Factor Theory of

Motivation, Maslow’s Hierarchy of Human Needs’



Productivity : Definition, measurement, productivity index, types of production system,

Industrial Ownership.

Designing Organizational Structures: Concept, Importance and characteristics of

organization, Types of organization - Project, matrix and informal organization. Span of

control, Delegation of authority.

Materials Management-Objectives, Inventory - functions, types, associated costs, Inventory

Control Systems-Continuous review system-periodical review system. Stores Management

and Stores Records. Purchase management, duties of purchase of manager,

associated forms.

TEXT BOOKS

1. O.P Khanna, Industrial Engineering. 2. T.N. Bhagooiwal Economics of Labour and Industrial Relations (Sahitya BhawanAgra) 3. Engineering Economy : Thuesen Prentice Hall

VLSI DESIGN

Introduction: Introduction to Computer-aided design tools for digital systems. Hardware

description languages, Introduction to VHDL, Data objects, Classes and data types, Operators,

Overloading, and Logical operators. Types of delays, Entity and Architecture declaration

Introduction to behavioral, dataflow and structural models

VHDL Statements: Assignment statements, Sequential Statements and Process, Conditional

Statements, Case Statements, Array and Loops, Resolution Functions, Packages & Libraries,

Concurrent Statements.

Applications of VHDL: Combinational Circuit Design such as such as Multiplexers,

Encoders, Decoders, Code Converters, Comparators, and Implementation of Boolean

functions etc., Sequential Circuit Design such as Shift registers, Counters etc.

Review of MOS Devices: MOS Structure, Enhancement & Depletion Transistor, Threshold

Voltage, MOS device design equations MOS Transistor Models. NMOS, PMOS, CMOS.

Basic Electrical Properties and Circuit Concepts: The NMOS Inverter and Transfer

Characteristics pull up and pull down ratios of NMOS, alternative forms of pull up the CMOS

Inverter and transfer characteristics. CMOS Inverter Delays. Driving large Capacitive loads,

Propagation delays and effect of wiring capacitance.

Circuit Characterization and Performance Estimation: Estimation of R, C, L, Switching

Characteristics-delay models. Power dissipation. Scaling of MOS circuits. Effect of device

scaling on circuit performance.



Recommended Text Books:

1. ―A VHDL Primmer‖: Bhasker; Prentice Hall 1995. 2. Weste and Eshrighian, ―Principle of CMOS VLSI Design‖ Pearson Education, 2001. 3. Pucknell D A and Eshraghian K, ―Basic VLSI Design‖, Prentice Hall India,

New Delhi (2003). 4. Fundamentals of Digital Logic with VHDL Design: Brown and Vranesic; TMH(2000) 5. S. M. Kang, Y. Lebiebici, ―CMOS digital integrated circuits analysis & design‖

TMH, 3rd Edition.

LAB VLSI

List of Experiments:

Combinational Design Exercises

1. Design of basic Gates: AND, OR, NOT.

2. Design of universal gates

3. Design of 2:1 Mux using other basic gates

4. Design of 2 to 4 Decoder

5. Design of Half-Adder, Full Adder, Half Substractor, Full Substractor

6. Design of 3:8 Decoder

7. Design of 8:3 Priority Encoder

8. Design of 4 Bit Binary to Grey code Converter

9. Design of 4 Bit Binary to BCD Converter using sequential statement

10. Design an 8 Bit parity generator ( with for loop and Generic statements)

11. Design of 2,s Complementary for 8-bit Binary number using Generate statements

Sequential Design Exercises

12. Design of all type of Flip-Flops using ( if-then-else) Sequential Constructs

13. Design of 8-Bit Shift Register with shift Right, Rhisft Left, Load and Synchronous reset.

14. Design of Synchronous 8-Bit universal shift register ( parallel-in, parallel-out) with 3-

output ( IC 74299)

15. Design of 4 Bit Binary to BCD Converter using sequential statement

16. Design counters (MOD 3, MOD 5, MOD 8, MOD 16) 17. Design a decimal up/down counter that counts up from 00 to 99 or down from 99 to 00.

18. Design 3-line to 8-line decoder with address latch



LAB MICROWAVE ENGINEERING

List of Experiments:

1. Study of microwave components and instruments.

2. Measurement of crystal characteristics and proof of the square law characteristics of

the diode.

3. Measurement of klystron characteristics.

4. Measurement of VSWR and standing wave ratio.

5. Measurement of Dielectric constants.

6. Measurement of Directivity and coupling coefficient of a directional coupler.

7. Measurement of Q of a cavity.

8. Calibration of the attenuation constant of an attenuator.

9. Determination of the radiation characteristics and gain of an antenna.

10. Determination of the phase-shift of a phase shifter.

11. Determination of the standing wave pattern on a transmission line and finding the

length and position of the short circuited stub

WORK PLAN ECE 2017-18 ARYANS GROUP OF COLLEGES · WORK PLAN ECE 2017-18 ARYANS GROUP OF...

Documents

Transcript of WORK PLAN ECE 2017-18 ARYANS GROUP OF COLLEGES · WORK PLAN ECE 2017-18 ARYANS GROUP OF...