Woodpecker complete

December 2013 Issue 9

with Recommended Retail Prices

The Complete Flooring GuideThe Complete Flooring Guide

AGD_OFC_13.indd 1 19/11/2013 12:37

WELCOME TO THE WORLD OF WOODPECKERWELCOME TO THE WORLD OF WOODPECKER

‘YOUR SATISFACTION GUARANTEED WITH A 25 YEAR WARRANTY’

Each Woodpecker floor carries this outstanding reassurance of our confidence that you will not find a better value product anywhere on the market. Your satisfaction depends on our care and attention to detail, such as the careful selection of the trees before they are felled and the way in which the timber is sawn, stacked and dried.

In most cases the sawn timber is air dried for over twelve months prior to a 2 stage kilning and dehumidification process to achieve maximum stability. It is then carefully selected for grain pattern, colour variation and knots, to provide the many varied appearances that are available within the Woodpecker range. It is then machined using the latest technologies – in many cases to engineering tolerances that up to a few years ago would have been thought impossible – so we can bring virtual perfection to your floor.

OUR COMMITMENT TO SUSTAINABILITY

We care about the environment and go to great lengths to bring to you products that have been manufactured from materials harvested with this in mind.

Stringent attention to all products right from the source to your door gives you the assurance that with a Woodpecker floor you are not impacting negatively on the environment.

Kenton Floors is a third generation family owned business who have been involved in the timber industry for over a quarter of a century. Our motto has always been:

‘THE BEST IS ONLY JUST GOOD ENOUGH’

At Kenton Floors ‘A�ordable quality’ is no idle claim. Our traditional high standards of selection and machining of every plank of flooring – instituted in the original small factory where the first floors were made – are still applied today now that our manufacturing facilities extend to thirteen state of the art factories around the globe. Every board goes through a rigid quality and grading process to ensure that the highest possible standards are met to guarantee your perfect satisfaction.

‘TRADITIONAL HAND FINISHING TO ACHIEVE A TIMELESS ELEGANCE’

The boards are then put through finishing processes such as lacquering, oiling or antiquing – many of which are carried out by hand using centuries old traditions – for that timeless elegance that only a natural wood floor can bring to your home.

Finally it is stored in our extensive warehousing facility where we hold large stocks ready for immediate dispatch to fulfil your requirements. All so that you can enjoy the natural elegance of timeless tradition without delay once you have made your selection.

We trust you will experience as much pleasure from your floor as we have had in bringing it to you.

The Woodpecker Team

PEFC/16-33-444

PEFC Certified

This product is

from sustainably

managed forests and

controlled sources

www.pefc.org

AGD_IFC_13.indd 1 20/11/2013 12:54

HO

W TO

CHO

OSE

ENG

INEERED

CORK

SOLID

BAM

BOO

DESIG

NER

LAM

INATE

DISCLAIMER

Although every care has been taken in the reproduction of this catalogue, each product has its own individual character. Variations will inevitably occur in the colour and structure, and the physical limitations of the printing process mean that we cannot guarantee your floor will look identical to the illustration.

SPECIFICATION DISCLAIMER

Kenton Floors reserves the right to change dimensions and grading specification without notice. Customers should confirm that the floor of their choice is still available with the specification shown.

PRICE DISCLAIMER

Prices can be changed without notice and should be checked prior to orders being placed. No responsibility or liability is accepted by Kenton Floors for any loss arising from such a change.

E&OE

While every e�ort is made to ensure that accurate pricing and descriptions are given, we reserve the right to decline orders if they are based on inaccurate information in this publication.

© Copyright 2013. No part of this catalogue may be copied or reproduced in any way, without the express written permission of Kenton Floors. Nor may this catalogue be used to sell or promote any products other than Woodpecker®.

INDEX

HOW TO CHOOSE THE RIGHT FLOOR 2GRADE & HARDNESS 3SURFACE FINISH 4ACCESSORIES 6INSTALLATION GUIDELINES 8PREPARATION GUIDELINES 8STICKING DOWN 10FLOATING 12SECRET NAILING 14THE TRICKY BITS 16UNDERFLOOR HEATING 18FLOOR CARE 20ROUTINE MAINTENANCE 20LONG-TERM MAINTENANCE 22SOLID WOOD 24YORK 25DUNSTER 30FLINK 32DENBIGH 38REAL WOOD ENGINEERED 40RAGLAN 41HARLECH 51HARLECH MAGNUM 65

BERKELEY 69GOODRICH 77WINDSOR 81CHEPSTOW 89DESIGNER COLLECTION 102ARUNDEL 103BAMBOO 108WARWICK 109STYLE 112CORK 118ESTILO 119LAMINATE 126OLSEN 127ACCESSORIES 152PROFILES 152SKIRTING & PIPE COVERS 159UNDERLAY & BARRIERS 160ADHESIVE & SEALANTS 162FLOOR CARE 164VUSTA 166PACK CALCULATOR 168TERMS & CONDITIONS 169

1

AGD_RRP_13_Intro_section.indd 1 21/11/2013 10:15

LAMINATE

Laminate simulates the appearance of a real wood fl oor without some of the practical drawbacks. Its colour and characteristics are determined by a decorative foil that is coated with a transparent melamine layer for durability. The core is made of High Density Fibreboard (HDF) for optimum strength and backed with a stabilizing cellulose paper.

TYPECHOOSE THE RIGHT FLOOR

SOLID WOOD

The traditional and timeless appeal of a solid wood fl oor will enhance the appearance of any interior and endure for generations. Each board is precision machined from a single piece of timber and typically fi nished with a robust tongue and groove joint on all sides.

ENGINEERED

Each board is constructed from multiple layers of wood pressed together. The top solid wood layer is available in a wide variety of species, fi nishes and thicknesses to accommodate all tastes and requirements. It is supported by a central core and backing board to give the fl oor increased stability.

ESTILO CORK

Innovative in design yet ecologically sustainable. A distinctive fl oor designed for optimum comfort, warmth and resilience. Prefi nished with a high-build UV lacquer for durability and available as either a stick-down tile or a glueless Clic system.

BAMBOO

While technically a variety of grass, the characteristics of a bamboo fl oor are comparable to that of a hardwood fl oor. Bamboo is 100% sustainable with a life cycle of around 5 years. Available in two styles; traditional and strand-woven, with the latter being twice as durable as the traditional method.

HO

W TO

CHO

OSE

2 HOW TO CHOOSE All prices include VAT


GRADE CHOOSE THE RIGHT GRADE

HARDNESS CHOOSE THE RIGHT HARDNESS

BAMBOO (STRAND WOVEN)

JATOBA

MERBAU

CANADIAN MAPLE

IROKO

BEECH

OAK

CHERRY

BAMBOO (ENGINEERED)

ASH

WALNUT

PINE

SOFTER HARDER

* Knots are divided into 2 main categories. A dead knot occurs when the core has been removed or has fallen out. It is subsequently filled. A live knot still has the core and generally does not contain filler. This grade includes both categories. When knots are filled it is not always possible

to closely match the colour of the wood. If large knots with filler are not wanted it is the responsibility of the customer to inform the installer to cut these out at the time of installation.

SELECT

This grade o�ers a natural look with limited knots. Considerable grain and colour variation provide a characterful look. Up to 10% sapwood permitted in some species but only small knots allowed.

RUSTIC

A rustic grade allows for considerable grain and colour variation. Up to 10% sapwood, large knots* (some filled); dark streaks and filled cracks are all acceptable.

EXTRA RUSTIC

Very little is graded out in this category. Large knots*, splits, cracks and any amount of sapwood are all to be expected when choosing this distinctive design.

HO

W TO

CHO

OSE

3HOW TO CHOOSEAll prices include VAT


FINISHING CHOOSE THE RIGHT SURFACE FINISH

UV OIL / UV HARDWAX OIL

An oiled finish penetrates the surface of the wood to bring out the natural beauty of the grain. Each board receives 5–7 coats of oil and is UV cured at every stage of the process. Choosing this finish allows for isolated areas of damage, such as scratches, to be easily re-touched without the need for major work.

UV MATT LACQUERED

The dull satin sheen of the matt lacquered finish has been designed to replicate the appearance of an oiled floor, without the same periodic maintenance requirements. Instead its smooth hard surface enjoys the same upkeep as a lacquered floor.

UV LACQUERED

A lacquered floor is typically smooth to touch and more glossy in appearance. Each board receives 5–7 coats of lacquer and is UV cured at every level of the process. The finished result is a hardwearing and durable surface that can be easily maintained.

UNFINISHED

An unfinished floor has no surface finish which allows you to create a truly bespoke result in terms of both colour and durability. All products are supplied with pre-filled knots and the boards are pre-sanded for your convenience.

SAWN

Keeping you right in touch with nature, the kerf of the saw marks are proudly exposed on each board producing that delightfully rustic feel that conjures up the inspiring smell of fresh sawdust and the pleasure of witnessing freshly sawn timber.

BRUSHED

The top of the board is lightly brushed to remove the softer surface fibres and expose the wood grain. The result is a subtly textured finish that delicately highlights the natural grain structure within the timber adding definition to each plank.

HO

W TO

CHO

OSE



BEVELLED EDGE

A bevelled edge adds definition to each plank creating a rustic feel that’s more traditional in design. The chamfered edges will vary in size between our di�erent flooring collections, with anything from a discreet micro-bevel right up to a deep v-groove.

SQUARE EDGE

The edges of each plank meet squarely when joined together, creating a smooth and seamless transition between the boards. This results in a clean and consistent overall finish that lends itself well to contemporary and formal interiors.

HANDSCRAPED

Full of rustic charm, this distinctive finish is characterised by the unique textures that result from the hand scraping process. Each plank is painstakingly scraped by hand prior to finishing which creates an aged look. The irregular ridges and grooves add depth and warmth yet remain smooth to the touch.

AGED & DISTRESSED

Each plank is hand distressed to produce a textured surface reminiscent of a naturally aged, rustic floor. The boards are then subjected to a series of caustic processes, such as smoking, before the application of oil, filler and stains to enrich their timeworn appeal.

HO

W TO

CHO

OSE



ACCESSORIES SELECT THE RIGHT TOOLS

HO

W TO

CHO

OSE

No castle is complete without a moat, drawbridge and gate; likewise, no floor is complete without supporting accessories. Customers often lose valuable time and inconvenience themselves by neglecting these items when placing their initial order. At Woodpecker we steer you through the entire process.

At the back of this catalogue you will find a detailed guide to a full range of over 1000 supporting products and accessories. Whether you’re interested in subfloor preparation or floor finishes, adhesives and underlays, or complementing trims - we provide everything you need to complete the job.

UNDERLAYS & BARRIERS

Our leading underlay brands have continuously impressed our customers and are widely regarded as an industry standard. Manufactured from the finest raw materials, they ensure that the very best support is provided for Woodpecker floors. Each covering is tailored to distinct installation variables including: underfloor heating, damp sub-floors, irregular surfaces, sound-sensitive installations, and budgetary limitations.

• Floormate™, Aquastop™, XL underlay and our range of damp proof membranes work to prevent water vapour from corrupting the floor planks

• Acoustamat™ reliably dampens noise pollution as part of a liquid batten installation

• Undermate™ allows the maximum transference of heat from underfloor heating

• For everyday value there is Basic20.

High performance specifications mean that these underlays meet and exceed stringent industry standards. After three generations as a flooring manufacturer we know the support a beautiful floor needs and accordingly these underlays have been designed to meet our high standards. You can find them on page 160.

SUBFLOOR PREPARATION

Comprehensive subfloor preparation is, quite literally, the foundation of any floor installation. Woodpecker’s custom-manufactured products can help you overcome many of the obstacles faced when fitting a floor and ensuring its longevity.

• 11P Surface Primer will seal any dusty or porous substrates to improve adhesion before applying Level-X™ or the MS Parquet Adhesive

• The WP60 Liquid Damp-proof Membrane seals residual moisture below the surface of the screed which in turn allows you to stick down your floor

• Level-X™ is our intelligent fibre-reinforced self-levelling compound designed to smooth surface irregularities ahead of installation.

ADHESIVES

All our adhesives are made to Woodpecker custom specifications and combine e�ortlessly with all our tongue and groove flooring ranges.

Woodpecker MS Parquet and WP50 Sausage Adhesive are specifically designed to be solvent free and remain fully flexible post-curing. This innovative characteristic allows the flooring to expand and contract between seasons without separating it from the subfloor.

The flooring grade PVA is of a much higher concentration than normally available. This formula of adhesive is a field-proven customer favourite.

For more information please refer to page 162.



HO

W TO

CHO

OSE

TRIMS

Flooring profiles can be a confusing minefield of complicated specifications. Factoring in size, colour and installation takes time and e�ort. It can hinder purchasing decisions. It is our intention to alleviate some of these uncertainties.

We o�er over 650 di�erent integrated trims with every single floor in our catalogue, far more than you will find elsewhere! To eliminate any confusion, each wood floor in the catalogue has a trim code listed within its specification. These codes relate to our Contour™ profiles and o�er the most appropriate height and colour trim for the job. Bamboo and laminate floors follow a similar format with their own corresponding range of profiles.

The secret to a successful floor lies in the finishing touches! Flooring profiles will conceal the unsightly edges of stairs, bridge expansion gaps in doorways and provide a smooth transition between di�erent floor coverings. Rosettes can be ordered to hide the base of radiator pipes and skirting is also available for convenience.

CONTOUR™ PROFILES

Premium solid wood trims that sit neatly in a black channel, which can be glued or screwed down. Our Contour trims are coded to fit each wood floor, allowing you to find the most appropriate height and colour trim for your floor choice. For the range and functions of di�erent trims please refer to page 152-4.

PROFILO™ PROFILES

Profilo solid Oak trims are a simple and cost-e�ective alternative to our Contour range. Available in one colour only – classic Oak – they unify many of our natural Oak floors. They are easy to install just requiring a quick stick down and are available in two di�erent length and height specifications. Please find the specifications listed on page 155.



INSTALLATION PREPARATION GUIDELINES

PRE-DELIVERY CONDITIONS

Before any flooring is delivered to site, all wet trades such as concreting, plastering and decorating should be complete and the building must be thoroughly dried out. Windows and doors must be fitted and watertight.

N.B: As a rough guide, the drying time for a sand and cement based screed is 1 day per mm for the first 50mm and 2.5 days per mm thereafter. Therefore, a 50mm screed will take approximately 2 months to dry out while a 100mm screed could take about 6 months. Plaster may take 6 weeks or more to dry completely.

SUBFLOOR PREPARATION

Ideally the subfloor should be prepared for installation in accordance with the industry standards outlined in BS-8201-2011. It must be in good structural condition and free from damp rot, fungal or insect infestation and contaminating residues. Surface irregularities should not exceed 3mm over a 2m area and the floor must be in a clean and vacuumed condition. Hot pipes should be well insulated to prevent localised hot spots under the floor that could lead to excessive shrinkage.

HEATING SYSTEMS

Before any flooring arrives on site, the room temperature and atmospheric Relative Humidity (RH) must be stable. All heating and air conditioning systems must be commissioned and operating for a minimum of 2 weeks before fitting can commence.

Where underfloor heating is being used, we would always recommend that a real wood engineered floor is installed in preference to a solid wood floor due to the increased stability that a multi-layered construction provides. Contractors that install solid wood flooring over underfloor heating, do so at their own risk!

INSPECTION

Woodpecker flooring is subject to strict quality control procedures, however, our products are manufactured from natural materials so it is essential that you check every plank carefully before installation. We cannot consider any claims regarding product defects after installation.

ACCLIMATISATION

Before installation, it is imperative that all flooring is acclimatised in the room it is to be fitted. The sealed unopened boxes should be laid flat, ideally in the centre of the room, or with at least 50cm distance from the walls. Flooring must not be stored outdoors, in an outbuilding or a room displaying ventilation, damp or condensation problems. The site conditions need to match those which will prevail when the floor is in use.

– Solid wood flooring requires 5–7 days acclimatisation

– Engineered and bamboo flooring require 3–4 days

– Laminate and Estilo flooring only require 24 hours

LAYING DIRECTION

Wood flooring looks its best when the planks are installed in the same direction as the light and down the length of the room. However, if your new floor is to be laid upon existing parquet, the boards should be arranged at right-angles to the existing floor.

Disclaimer: Installation guidance is advisory and based on established good practice and BS-8201-2011. It is the responsibility of the installer to ensure that correct procedures are followed before, during and after installation. Kenton Floors do not accept any responsibility for any issues relating to installation.

HO

W TO

CHO

OSE

8 FITTING All prices include VAT


MOISTURE TESTING

While the surface of the subfloor may appear dry, it is possible that excess moisture may still be present within the substrate. As wood and moisture are natural enemies, it is imperative to test the subfloor moisture content before fitting. Using a professional moisture meter such as the Protimeter MMS, the readings must not exceed the following:

– 70% Relative Humidity (RH) for cement based concrete

– 11% Wood Moisture Equivalent (WME) for wooden subfloors or joists.

ATMOSPHERIC CONDITIONS

It is important that the following conditions are fulfilled before, during and after the installation:

– Room temperature of at least 18°C (64°F)

– Floor surface temp. of at least 15°C (59°F)

– Atmospheric RH of between 40% and 60%

N.B: Wood flooring is not suitable for installation in wet rooms or areas where there is a regular flow of water.

HO

W TO

CHO

OSE

9FITTINGAll prices include VAT


INSTALLATION STICKING DOWN YOUR FLOOR

A traditional tongue and groove wooden floor can be fixed directly to a concrete subfloor using the Woodpecker MS Parquet Adhesive. This purpose-made adhesive will hold the timber after a short open time but remains permanently flexible to allow for the expansion and contraction of the timber between seasons.

The adhesive should be applied using a 3–4.8mm notched trowel (depending on the condition of the subfloor) and spread evenly onto the subfloor. It is essential that there is a full bond and that each board is fully adhered to ensure maximum stability.

We always recommend that solid wood flooring is installed by an experienced floor fitter. Wood is a natural product and susceptible to dimensional changes – each situation needs to be professionally assessed before installation commences.

N.B: Never glue the joints when fully sticking your floor down. It places too much pressure on the boards and could lead to cracking.

Level-X™ Primer ..................................................P.162Level-X™ Compound ..........................................P.162WP60 Liquid DPM .............................................P.162MS Parquet Adhesive .........................................P.162

Preparation Checklist

Are all wet trades complete and thoroughly dried out? As a rough guide, the drying time for a sand and cement based screed is 1 day per mm for the first 50mm and 2.5 days per mm thereafter.

Is the subfloor clean, dry and free from any contaminating residues? If it is necessary to level the subfloor before fitting, apply Level-X Primer followed by Woodpecker Level-X (Fibre Reinforced) Self-Levelling Compound. NEVER use latex self-levelling compounds. They do not have the tensile strength to resist the movement of the timber.

Are the subfloor moisture readings within tolerance? A cement based screed must have an RH (Relative Humidity) reading of 70% or less. If there is any doubt as to the moisture levels in the subfloor always apply the Woodpecker WP60 Liquid Damp Proof Membrane which will seal the moisture below the surface of the floor and prevent the floor from expanding and distorting. The subfloor must be free of dust and any contamination before application. Wooden subfloors must have moisture readings of between 7% and 11% WME (Wood Moisture Equivalent) and the new flooring should be left to acclimatize until it has reached a similar reading so as to prevent undue expansion or contraction. If the initial moisture readings are not within tolerance then an alternative method for fitting should be used.

Is the atmospheric RH reading between 40% and 60%?

If underfloor heating is present, has it been properly tested and turned o� 48 hours before fitting?

Has the flooring been acclimatised for the correct period of time?

HO

W TO

CHO

OSE



HO

W TO

CHO

OSE



INSTALLATION FLOATING YOUR FLOOR

Floating a floor essentially means that the new boards are loose laid over a suitable underlay instead of being screwed, nailed or stuck to the subfloor.

A floating floor can be installed over various subfloors including concrete, anhydrite, existing wood floor, chipboard, ceramic tiles, PVC and linoleum, providing they meet the preparatory guidelines. Soft subfloor coverings such as carpet must be removed.

Underlay should be laid edge-to-edge, in the opposite direction to that of the flooring, and linked using an adhesive tape. If your underlay is dual-purpose and also provides a Damp Proof Membrane (DPM), always use the Woodpecker Vapour Tape to prevent moisture rising between the seams. Do not overlap the underlay unless it has been specifically designed to do so.

Starting in a corner of the room lay the first row of flooring with the tongue (T&G) or top lip (Loc/Clic) of the board facing the wall. Don’t forget the necessary expansion gaps! Ensure that all boards are tightly joined or glued together, using a tapping block or pulling iron with care if necessary. The o�-cut from the final board in each row can be used to begin the next row, providing it measures 200mm or more. To maximise the appearance of your floor it is important to stagger the ends of the boards (header joints) by at least 300mm.


Are all wet trades complete and thoroughly dried out? As a rough guide, the drying time for a sand and cement based screed is 1 day per mm for the first 50mm and 2.5 days per mm thereafter.

Is the subfloor level to within 3mm over a 2m radius? Minor undulations can be disguised using the Woodpecker XL Underlay which will help to absorb slight irregularities. However, if it is necessary to level the subfloor before fitting, apply Level-X Primer followed by Woodpecker Level-X Self-Levelling Compound.

Are the subfloor moisture readings within tolerance? A cement based screed must have an RH (Relative Humidity) reading of 70% or less while wooden subfloors must read between 7% and 11% WME (Wood Moisture Equivalent). If there is any doubt as to the moisture levels in the subfloor always use an underlay with integral DPM (Damp Proof Membrane) and install barrier side down to form a protective layer.




HO

W TO

CHO

OSE

Level-X™ Primer ..................................................P.162Level-X™ Compound ..........................................P.162Underlay & Barriers ............................................P.160Adhesive & Sealants ...........................................P.162



LOC SYSTEM

Although not always viable, fitting is easiest when you ‘loc’ down the boards in complete rows rather than individually. When connecting the header joints, insert the board into the lip at an angle of 30° then simultaneously move the board closer and lower into position. The flooring should ‘loc’ into place. Never use force; instead remove the board and check for dirt or excess lacquer then try again.

CLIC SYSTEM

When installing, align the long edge of the board first and simply ‘clic’ into position. Using a tapping block, gently knock the header joint up towards the previous board until they snap together. Remember, these instructions are advisory and you may find that, for you, installation is still easier if the header joints are connected prior to the long edges and the whole run inserted together.

TONGUE AND GROOVE

When gluing a tongue and groove board, run a generous bead of adhesive along the lower groove of both the long-side and header joint. This will provide a su±cient bond between the boards and eliminate squeaking. To fix into place, slide towards the long edge with the header joint connected and tighten using a tapping block or pulling iron as necessary.

HO

W TO

CHO

OSE



INSTALLATION NAILING DOWN YOUR FLOOR

A traditional tongue and groove wooden floor can be secret nailed over an existing timber subfloor or (subject to thickness) fixed directly above joists to provide a structural floor.

Current building regulations stipulate that a structural floor must exceed 18mm in thickness. Where possible it is recommended that a structural timber based sheet material is installed over the joists ahead of the flooring being fitted to avoid any surface irregularities.

Whichever method you use, the subfloor must be of an appropriate width and thickness to retain a 50mm cleat when fired into it at 45°. Joists must be kiln dried to avoid cupping or expansion and must be spaced in accordance with current building regulations (this is predetermined over joists, but we recommend approximately 300mm intervals otherwise).

When secret nailing always use the Woodpecker Moistop Barrier Paper over the subfloor and overlap the joins by a minimum of 200mm. The bitumen backing self-seals around the punctures formed by nails to maintain a watertight barrier. It may be necessary to secure the joins with a moisture resistant tape.

Flooring should be fitted at 45° or 90° to the subfloor and nailed over every joist – through the sheet material if applicable. It is possible to have header joints which are not over a joist providing the boards either side are fully spanning the joists. Cleats should be no more than 400mm apart.

N.B: Never use adhesive to glue the joints in combination with this method.


Are all wet trades complete and thoroughly dried out?

Is the subfloor structurally safe and free from damp rot, fungal or insect infestation?

Is the subfloor clean, free of chips or shavings, dry and level to within 3mm over a 2m area?

Will the subfloor retain a 50mm cleat when fired into it at 45°?

If necessary, have all hot pipes been insulated to prevent hot spots?


Does the subfloor measure between 7% and 11% WME (Wood Moisture Equivalent)? Wooden subfloors must have moisture readings of between 7% and 11% WME (Wood Moisture Equivalent) and the new flooring should be left to acclimatize until it has reached a similar reading so as to prevent undue expansion or contraction.



HO

W TO

CHO

OSE

Moistop™ Barrier Paper .....................................P.161



HO

W TO

CHO

OSE



INSTALLATION THE TRICKY BITS

THE FIRST ROW

After determining the best layout of the flooring and the starting wall, measure the width of the room and divide it by the width of the flooring panels to determine the number of rows and the width of the last row. If the last row is determined to be less than 60mm wide, it should be adjusted by cutting the first row lengthwise.

– Check all panels for possible damages/defects.

– Starting from the left hand corner of the room lay the first row of flooring with the tongue (T&G) or top lip (Loc/Clic) of the board facing the wall.

– Place spacers between the edge of the flooring panels and the wall to provide an appropriate expansion gap.

– Mark then cut the last panel in the first row to the required length. Use the remainder of the board to start the second row of flooring

– Always make sure the o�-cut is at least 200mm in length. If not, cut another piece greater than 200mm in length.

– Start all subsequent rows with the o� cut piece from the previous row.

N.B: Ensure all the short ends are staggered at least 300mm. It is vital to maintain a minimum of 300mm between the ends of boards in the adjacent rows (staggered).

PIPES

Measure the position of the pipes and mark it on the panel, consider also the expansion. Take measurements from the spacers into account. Drill a hole 16mm (5/8”) bigger than the pipe diameter expansion provision. Saw at a 45 degree angle to the holes. Apply glue to the sawn out piece and fit in with the pull bar. Again, do not forget the spacers.

DOOR JAMB

If you have a wooden door jamb, we recommend undercutting the door jamb according to the thickness of the flooring plus the possible underlay. Install the flooring underneath the doorjamb but leave the necessary expansion gaps!

HO

W TO

CHO

OSE

Flooring Profiles ....................................................P.152Skirting & Pipe Covers ........................................P.159



EXPANSION GAPS

Since wood flooring is a natural material, it is subject to shrinkage and expansion due to changes in climate conditions. Therefore, expansion gaps must be left when a floor meets obstructions such as walls, doorframes, structural supports, stairs, fireplaces or pipes. Spacers should be placed at regular intervals when fitting and removed before skirting boards or trims are installed to conceal the gaps.

For wood flooring it is necessary to leave at least 2mm for every 1m span across the board with a minimum of 10–15mm regardless. For particularly large areas exceeding 8 metres in width (or 5 metres in width for a solid wood floor) it is recommended that additional expansion provision should be allowed by the inclusion of washer or penny joints at appropriate intervals across the floor. For Laminate and Estilo flooring, a minimum of 8mm expansion is required.

N.B: Skirting boards should always be fixed to the wall and must not in any way obstruct the movement of the floor.

HO

W TO

CHO

OSE



FLOOR HEATING UNDERFLOOR HEATING

CHOOSING A FLOOR

In general we would always recommend that where underfloor heating is being used, then a Real Wood Engineered floor should be installed in preference to a Solid Wood floor due to the increased stability that a multi-layered construction provides. In particular, the Raglan Range is particularly good for use with underfloor heating as the depth of the board allows for e�ective thermal transfer.

Not all timbers react well with underfloor heating so it is important to choose one of the floors that is recommended for use with underfloor heating. Each floor in this catalogue carries a recommendation in the listing next to the product as to its suitability.

CHECK YOUR SUBFLOOR

You must NEVER install underfloor heating over a concrete subfloor that has a moisture content of more than 75% Relative Humidity (RH). Ideally we would recommend it to be below 70% RH to give a margin for error.

In the case of timber subfloors, it is important that the moisture content does not exceed 11% Wood Moisture Equivalent (WME). Make sure your installer has checked these readings before proceeding.

If the measurements exceed the above guidelines, then one of the Woodpecker damp proof preparation products must be used prior to installation of the heating system.

PICK YOUR SYSTEM

There are two main types of system available with many variations from di�erent manufacturers, but essentially they will either be water heated or electrically heated systems.

In general, water heated systems are normally found in new build or renovation projects, while electrically heated systems are generally found in situations where installation is required to be relatively quick and easy.

Whichever system you choose, the maximum water or electrical element temperature should not be greater than 50°C and the temperature below the floor must never exceed 27°C.

TEST YOUR HEATING

Prior to fitting your floor, the underfloor heating should, in the case of a water heated system, be fully pressurised, tested for leaks and left to run usually for a fortnight, but certainly until all the moisture in the screed or timber subfloor has been driven o�.

Plaster should be dry and all the wet trades finished in the rooms to which the flooring is to be fitted. The atmospheric Relative Humidity within the room should read between 40% and 60%.

FITTING YOUR FLOOR

Your underfloor system should be turned o� for at least 48 hours prior to fitting the floor. Only electrical heating or central heating should be used during installation.

Engineered tongue and groove floors (subject to suitability of species) should always be fully adhered to the subfloor using the Woodpecker MS Parquet (Flexible) Adhesive.

An Engineered floor with a glueless locking joint can, in most cases, be floated over underfloor heating subject to suitability of species. Remember to pick an underlay that is suitable for use with underfloor heating.

If only part of the subfloor has underfloor heating, the new flooring must not be laid continuously but separated by dilation joints because flooring installed over underfloor heating is likely to expand and contract more than flooring that is not.

HO

W TO

CHO

OSE

18 FLOOR HEATING All prices include VAT


AFTERCARE

After fitting, the floor should be left for 2–3 days to fully acclimatise to its new surroundings and if relevant for any adhesive to fully cure before the heating is switched on.

When ready, the heating should be raised gently by 1°C per day from the prevailing ambient temperature. It must NOT be turned on full straight away.

Raising and lowering the temperature of your heating too quickly can result in dimensional changes to the timber which will cause the floor to shrink and crack.

As a general rule, this method of gradually increasing and decreasing temperatures should be followed in the day-to-day running of your system. Ideally, underfloor heating should be left running from the thermostat all the time and only raised or lowered by 1°C per day to accommodate the di�erent seasons.

MORE INFO

These guidelines are not exhaustive and are provided to give a general understanding of how the systems work. They do not replace the need to follow the recommended fitting procedures of each individual manufacturer.

CONCRETE SCREED

WOODPECKER UNDERMATE

WOODPECKER DAMP PROOF MEMBRANE

1°C per day

HO

W TO

CHO

OSE

19FLOOR HEATINGAll prices include VAT


FLOOR CARE ROUTINE MAINTENANCE

ROUTINE CARE

We appreciate that hardwood flooring is a major investment for most people and knowing how to clean and maintain your floor is paramount in retaining its natural beauty and ensuring longevity.

LIGHT CLEANING

Wooden floors can either be swept regularly using a soft bristled broom or vacuumed frequently to remove any dirt and girt. When vacuuming your floor, it is advisable to use a soft brush attachment to minimise scratching.

PETS

Wooden floors hold many advantages for pet owners but inevitably animals can damage your floor. Keep claws trim to prevent scratches and mop any ‘accidents’ immediately to avoid staining. Opting for a light coloured floor will minimise the appearance of scratches, while an oiled finish will allow you to easily carry out spot repairs if necessary.

SPILLAGES

Since water and wood are natural enemies, any spillages should be removed promptly! While small drops of water may not harm your floor, excessive amounts of water left sitting on the boards are likely to cause lasting damage.

SHOES

As a rule of thumb, stilettos should be left at the front door and heavy shoes avoided! High heels and stilettos in particular, exert a phenomenal pressure that even the toughest of timber species struggle to withstand.

SUNLIGHT

Exposure to direct sunlight will cause your floor to mellow in colour over time. Red woods like Merbau, Jatoba, Cherry etc., are particularly susceptible to colour change. Be sure to frequently move rugs and mats placed in these areas to ensure the floor colour matures evenly.

PROTECTION

Prevention rather than cure is the key to a beautiful floor! Consider using rugs or carpet runners in high tra±c areas such as hallways and never drag furniture or other objects across a wood floor. Woodpecker o�ers a variety of felt protectors and castor cups that will allow furniture to be moved with ease and without marking your floor.

FLOOR MATS

Install good quality floor mats at each entrance to trap dirt and prevent damage. Grit underfoot will act like sandpaper against your floor. Woodpecker Coir Matting is an ideal entrance barrier for wet and dirty feet.

HO

W TO

CHO

OSE

CLEANING PRICE LIST See Page

Woodpecker Cleaning Kit77-WKO-001 Oiled Floors £28.90 P.16577-WKL-001 Lacquered / Laminate £28.90 P.165

Woodpecker Cleaner Refill77-WOC-001 Oiled Floors £11.90 P.16577-WLC-001 Lacquered / Laminate £11.90 P.16577-WRC-001 Washable Mop Head £11.90 P.165

Woodpecker One Coat Soap81-OCS-002 Oiled Floors (2 Litre) £41.90 P.164

Heavy Duty (Self Adhesive) Felt Pads 05-FFP-951 Round (19mm) £4.80 P.16505-FFP-952 Round (25mm) £4.80 P.16505-FFP-953 Round (38mm) £4.80 P.16505-FFP-947 Multi-pack (various sizes) £11.50 P.16505-FFP-950 2 pads (113x153mm) £7.50 P.165

20 All prices include VATFLOOR CARE All prices include VAT


MOPPING

Always use a well wrung mop when wiping your hardwood floor. Excess liquid has the potential to seep down the joins in a floor and cause permanent damage.

Specially formulated for Woodpecker floors are our comprehensive Cleaning Kits, containing an antistatic mop, cleaning fluid and trigger head spray bottle for easy application. The cleaning kits are o�ered for both lacquered and oiled finishes, with product refills available as necessary.

In addition to the above kits, Woodpecker One Coat Soap is a concentrated cleaning solution exclusively for oiled floors. Once diluted, it is applied in a similar fashion to the above. Repeated use of Woodpecker products on oiled floors will help develop an invisible film, o�ering extra protection and increased resistance to dirt.

HO

W TO

CHO

OSE

Floor Care ...............................................................P.164

21FLOOR CAREAll prices include VAT


FLOOR CARE LONG–TERM MAINTENANCE

LONG-TERM CARE

Despite using some of the most advanced finishing products and techniques on the market, a hardwood floor will not withstand the brunt of daily life forever. Eventually, even the most well-tended of surfaces will require a little extra maintenance.

It is important to maintain an existing floor finish in good time. If you allow the protective coat to wear away, it becomes susceptible to dirt and water which can penetrate the surface of the wood making the floor di±cult to clean and quickly subdued. Routine maintenance is particularly important for floors with distinctive finishes, as sanding will take out all traces of an existing stain or texture.

Due to individual circumstance, it is impossible to recommend how often you should renew your floor finish but as a preventative measure, you may wish to recoat the floor every 2–3 years. To perform a basic evaluation of your floor finish, select a high tra±c area and pour a few drops of water onto the floor. A well finished floor will force beads of water to form on the surface suggesting that no maintenance is required. If the water slowly soaks into the timber leaving behind a light saturation mark, the finish is only partially e�ective and a new coat of lacquer or oil should be applied. Alternatively, if the water is immediately absorbed leaving behind a dark stain, it indicates that the finish has completely worn and the floor may need to be sanded and recoated.

Methods of repair will di�er depending on whether your chosen floor was pre-treated with an oil or polyurethane lacquer. If you are unsure, as a general rule of thumb a lacquered floor is typically smooth and shiny while an oiled floor has a matt finish and subtle texture. However, before any surface treatment is carried out, we always recommend that an adhesion test is performed in an inconspicuous area to determined compatibility.

Unfortunately, a laminate floor cannot be repaired in the same way that a hardwood floor can, however, small chips and scratches can be concealed using the Colourfill Repair Kit. The kit is supplied together with a solvent to clean the a�ected areas before filling and to remove excess filler afterwards.

OILED FLOORS

Unlike a lacquered floor, an oiled surface allows for isolated areas of damage, such as scratches and stains, to be easily re-touched without having to re-oil the entire floor. Although easier to repair, they usually require earlier periodic maintenance.

ONE COAT SOAP

The One Coat Soap is a concentrated cleaning solution specially designed for oiled floors. When diluted with 150mls of water, it can be used in the same fashion as the Woodpecker Maintenance Kits. However, on occasion it can also be used as neat solution to perform a deep clean. If this fails to revive the floors natural lustre then you will need to consider re-oiling your floor.

ONE COAT CLEANER

Before re-oiling all or part of your floor, it is essential that the wood is free from dust and contamination to ensure adhesion. Applying a small amount of the One Coat Cleaner to a dry cloth is su±cient enough to intensively clean the a�ected area. It also allows for any dust to be collected electro-statically. Drying times will vary from 15–60 minutes depending on saturation. If the floor remains soiled, you will have to consider sanding the surface to remove the engrained dirt.

ONE COAT OIL

Using a cotton cloth, brush or squeegee, the oil is applied sparely and evenly to the floor and worked into the wood along the grain. The oil only needs 60 seconds to react with the floor and the excess must be rubbed o� within 15–20 minutes of application, until practically dry. With such a quick response time required, it is important not to expand treated areas beyond your resources. One Coat Oil is also suitable for commercial properties without the need for multiple coats. Its ability to re-disperse on the surface of the wood also eliminates tide marks and any signs of overlapping. Approximately 24–36 hours after application, the floor is suitable for foot tra±c.

HO

W TO

CHO

OSE

22 FLOOR CARE All prices include VAT


HO

W TO

CHO

OSE

LACQUERED FLOORS

Small indentations and isolated scratches can be concealed and recoated using the Woodpecker Touch-Up Lacquer. Before application, ensure that the area in question is dry and free from dirt, dust or grease. Using the brush applicator supplied within the lid, paint the lacquer onto the a�ected area and leave to cure.

To disguise deeper scratches or gouges, you many need to use a professional wood floor filler. Available in a wide variety of colours from most hardware or flooring retailers, these pastes are applied to the damaged area, left to cure, sanded flush and later sealed using the Touch-Up Lacquer to maintain a protective shell.

When it comes to restoring your entire floor, the Ultimo Lacquer is available in two grades to cater for both domestic and commercial environments. A factory lacquered floor will not need to be sanded back prior to application,

however, previously re-lacquered surfaces must be lightly sanded to ensure su±cient adhesion.

Unlike an oiled floor, the lacquer doesn’t penetrate the surface of the wood so the entire floor must be re-lacquered to prevent the formation of ridges. Best results are achieved using a roller. A single coat is su±cient enough to protect against moisture although several coats may be applied if the floor is subject to high levels of foot tra±c. When coating unfinished timber, three coats of lacquer are required. Between each coat of lacquer, the floor must be sanded, vacuumed and wiped with a damp cloth before re-coating.

The lacquer will take about 1–2 hours to dry between applications. After 24 hours the floor is suitable for light foot tra±c, although the surface will continue to cure for 7 days before rugs can be replaced.

Floor Care ...............................................................P.164

23All prices include VAT FLOOR CARE


SOLID WOODTIMELESS ELEGANCE AND CHARM

For centuries timber has been used as the fl ooring material of choice. It evokes an atmosphere of timeless elegance and charm, making it an inviting addition to any environment. Its distinctive character radiates warmth which further substantiates its enduring beauty.

At Woodpecker we only select the best quality timber, harvested from sustainably managed forests throughout Europe and the Americas. Each board is engineered from a single piece of timber that is carefully chosen, graded, and then precision-machined with a tongue and groove joint on all sides to ensure your fl oor is held securely.

Wood is permeable, meaning it takes on and gives o� moisture which in turn will cause it to expand or contract. We strongly recommend that you use an experienced fl oor fi tter who has the necessary experience and equipment to test the atmospheric and subfl oor moisture levels in your property prior to installation. If the prevailing conditions are accounted for, you will end up with a fl oor that is entirely to your satisfaction.

SOLID

fl oor that is entirely to your satisfaction.

SOLID WOOD24 All prices include VAT

AGD_RRP_13_solid_section.indd 24 02/12/2013 09:53

As an Oak or Walnut the York range takes its inspiration from the city fortifi cations of the same name. Every Englishman’s home is his castle and this range will see you through war and peace, providing comfort whilst laying a solid foundation for future living.

• Available in European Oak or American Black Walnut• Finished with 5 coats of high-wear UV lacquer or oil• Machined with a traditional tongue and groove joint• Detailed installation guidance available on pages 14-23

YORKTRADITIONAL, RESILIENT AND AFFORDABLE

YORK

5 COATS OF DURABLE UV LACQUER / OIL

TONGUE AND GROOVE JOINT

MANUFACTURED FROM SOLID OAK

STRESS GROOVES

TRIMS AVAILABLE See Pages 152-5 BEVELLED EDGES

Page 26 Page 29 Page 28

SOLID

25SOLID WOODAll prices include VAT


Sourced from extensive Oak forests across Europe...

York Oak Rustic Plank

YORK

SOLID

TYPE OF FLOOR Solid Wood

THICKNESS 18mm

LENGTH X WIDTH 300–1500mm x 130mmaverage length 700mm

PACK SIZE 2.29m2

PLANKS PER PACK Variable

TYPE OF FINISH UV Lacquered / UV Oiled

GRADE Rustic

TYPE OF JOINT Tongue and Groove

BEVELS ON EDGES All 4 edges

METHOD OF FIXING Stick down or secret nail

UNDERFLOOR HEATING Not advised

HARDNESS Hard

TRIM CODE High U O M I B Q L E H D X S N J W Z

York Oak Lacquered36-YOR-001£48.95/m2 £40.79/m2 EX VAT

York Oak Oiled36-YRO-001£49.95/m2 £41.63/m2 EX VAT

26 SOLID WOOD All prices include VAT


Beautiful mellow colours...

York Oak Select Plank

YORK

SOLID


THICKNESS 18mm


PACK SIZE 2.29m2


TYPE OF FINISH Brushed & UV Matt Lacquered

GRADE Select





HARDNESS Hard


York Oak Select Brushed & Lacquered36-YBM-004£57.95/m2 £48.29 /m2 EX VAT



York Antique Oak Handscraped Plank

Hand scraped to add character and charm...

YORK

SOLID


THICKNESS 18mm


PACK SIZE 2.29m2


TYPE OF FINISH UV Lacquered

GRADE Rustic





HARDNESS Hard


York Antique Oak Handscraped36-YOA-003

£57.95/m2 £48.29/m2 EX VAT



York Walnut Plank

Swirling colours of dark chocolate and honey...

YORK

SOLID


THICKNESS 18mm


PACK SIZE 2.29m2


TYPE OF FINISH UV Matt Lacquered

GRADE Rustic





HARDNESS Medium

TRIM CODE Medium U O M I B Q L E H D X S N J W Z

York Walnut Lacquered36-YWR-001

£79.95/m2 £66.63/m2 EX VAT



UNFINISHED SURFACE



STRESS GROOVES

UNFINISHED SURFACE



STRESS GROOVES

UNFINISHED OAK TRIMS AVAILABLE See Pages 152-4 PRE-FILLED UNFINISHED SURFACE

Page 31

DU

NSTER

SOLID

A Dunster fl oor emulates the great castle that was home to the same family for over 600 years. Inspiring loyalty and ensuring quality is the reason we guarantee each of our fl oors for 25 years and Dunster carries that through thanks to its heritage and refi nement.

• Manufactured from premium quality European oak • Supplied unfi nished for greater fl exibility• Available in three widths• Filled and sanded for your convenience

DUNSTERRICH, ACCOMPLISHED AND CHARISMATIC



Dunster Oak Rustic Plank

French Oak, the most beautiful timber in both character and colour...

Supplied Unfinished

After finish coat applied

DU

NSTER

SOLID


THICKNESS 18mm

LENGTH X WIDTH 500–2000mm x 140/160/180mm

PACK SIZE 1.68 / 1.92 / 2.16m2


TYPE OF FINISH Unfinished. Filled and Sanded

GRADE Rustic


BEVELS ON EDGES None



HARDNESS Hard

TRIM CODE High U O M I B Q L E H D X S N J W Z U O M I B Q L E H D X S N J W Z

Dunster Oak Unfinished 18 x 140 x 500-2000mm

18-OCU-140

£57.95/m2 £48.29/m2 EX VAT

18 x 160 x 500-2000mm

18-OCU-160

£62.95/m2 £52.46/m2 EX VAT

18 x 180 x 500-2000mm

18-OCU-180

£67.95/m2 £56.63/m2 EX VAT



HIGH WEAR RESISTANT UV LACQUER

SOLID OAK ENGINEERED CORE

GLUELESS LOC JOINT

TRIMS AVAILABLE See Pages 152-5


* Detailed instructions are provided in each pack as to the installation procedures and precautions which must be taken.

FLINK

SOLID

Flink is a clever product; in fact it’s the only one of its kind on the market. Engineered from 3 layers of solid oak, it o� ers a level of stability unrivalled by a conventional solid oak fl oor. Its pioneering design helps to eliminate some of the di¢ culties posed by a damp subfl oor*.

• Completely solid all the way through but engineered for stability• Patented ‘drop and lock’ joint for quick and easy fi tting• Brushed then lacquered for a beautifully textured high-wear fi nish• A completely unique product – exclusive to Woodpecker

FLINKUNIQUE, VERSATILE AND INNOVATIVE



Flink Natural Oak Plank

Individual character leading to a quiet grove…

FLINK

SOLID

TYPE OF FLOOR Engineered Solid Oak

THICKNESS 14mm

LENGTH X WIDTH 300–1200mm x 125mm

PACK SIZE 1.5m2



GRADE Rustic

TYPE OF JOINT Glueless Loc


METHOD OF FIXING Floated


HARDNESS Hard


Flink Natural Oak76-ORL-200

£63.95/m2 £53.29/m2 EX VAT



Flink Whitened Oak Plank

Beautiful textured surface processed with 5 surface finishes...

FLINK

SOLID


THICKNESS 14mm


PACK SIZE 1.5m2



GRADE Rustic





HARDNESS Hard


Flink Whitened Oak76-ONL-200

£65.95/m2 £54.96/m2 EX VAT



Reaching standards of precision not previously seen...

Flink Dark OakPlank

FLINK

SOLID


THICKNESS 14mm


PACK SIZE 1.5m2



GRADE Rustic





HARDNESS Hard


Flink Dark Oak76-OCL-200

£65.95/m2 £54.96/m2 EX VAT



FLINK

SOLID

Deluxe, matured tones…All prices include VATSOLID WOOD36


Stable, practical and easy to fit...

Flink Oak Cognac Plank

FLINK

SOLID


THICKNESS 14mm


PACK SIZE 1.5m2



GRADE Rustic





HARDNESS Hard


Flink Oak Cognac 76-OWL-200

£65.95/m2 £54.96/m2 EX VAT







UNFINISHED SURFACE

UNFINISHED SURFACE

Page 39

20mm

DEN

BIGH

SOLID

The fortress of Denbigh is a dominating sight; a natural stronghold with a unique triple-towered gatehouse. Our Denbigh parquet fl oor evokes the same grandeur and picturesque nature of the castle, manifested in the timeless herringbone pattern as one of the oldest forms of wood fl ooring.

• Universal tongue and groove joint (no left or right!)• Two length specifi cations to suit your choice of pattern • Popular designs include herringbone, basket weave and ship decking but the possibilities are endless • Supplied unfi nished, ready for staining and sealing

DENBIGHCLASSICAL, ELEGANT AND TIMELESS



Denbigh Blocks Unfinished Oak

Traditional parquet style...

DEN

BIGH

SOLID


THICKNESS 20mm

LENGTH X WIDTH 230/280mm x 70mm

PACK SIZE 1.06 / 0.98 m2

PLANKS PER PACK 65 / 50

TYPE OF FINISH Unfinished. Sanded

GRADE Rustic



METHOD OF FIXING Stick down


HARDNESS Hard


Denbigh Blocks Unfinished Oak 20 x 70 x 230mm04-ORU-230

£47.95/m2 £39.96/m2 EX VAT

20 x 70 x 280mm04-ORU-280

£49.95/m2 £41.63/m2 EX VAT



ENG

INEERED ENGINEERED WOOD

STABILITY WITH DESIGN

The increasing popularity of wooden fl oors in modern homes has led to signifi cant challenges. Contemporary housing is almost always centrally heated, often leading to relatively low atmospheric moisture. Advancements in subfl oor materials and the growing popularity of underfl oor heating have all made it necessary for increasingly sophisticated fl oors.

A real-wood engineered fl oor is the most versatile choice as it responds well to underfl oor heating, has all the aesthetic benefi ts of a solid wood fl oor, but eliminates many of the practical drawbacks posed by solid timber. Manufactured using cutting edge technology, all wastage is kept to a minimum in line with our commitment to sustainability.

Engineered fl oors o� er greater variety of design due to their layered construction. Typically formed in three tiers, the chosen species shapes the top wear layer; a central core (softwood, high density fi breboard or plywood) adds stability and a balancing veneer completes the construction. The top wear layer can vary from 2.5mm to 6mm depending on the product.

40 All prices include VATREAL WOOD ENGINEERED

AGD_RRP_13_Engineered_Section.indd 40 02/12/2013 09:55

RAG

LAN

5 COATS OF UV LACQUER/OIL

HDF CORE

2.5MM WEAR LAYER

GLUELESS LOC JOINT

GLUELESS LOC SYSTEM

Page 42 Page 46Page 44 Page 45 Page 49Page 47 Page 48 Page 50

10.5mm

PERFECT FOR USE WITH UNDERFLOOR HEATING

ENG

INEERED

Beautiful French-infl uenced design did not stop Raglan from being the last castle to surrender whilst under siege during the English Civil War. The wooden planks of this range emulate the castle - technologically advanced and durable, yet beautiful to look at.

• Thickness specifi cation works well with underfl oor heating • Bevelled on all four edges to add defi nition to each plank• High Density Fibreboard (HDF) core for added stability • Patented glueless ‘Loc’ system for easy installation

RAGLANBEAUTIFUL, PRACTICAL AND DURABLE

41All prices include VAT REAL WOOD ENGINEERED


Raglan Oak Rustic Plank

RAG

LAN

ENG

INEERED

TYPE OF FLOOR Real Wood Engineered

THICKNESS 10.5mm (wear layer 2.5mm)

LENGTH X WIDTH 1860mm x 148mm

PACK SIZE 2.2m2

PLANKS PER PACK 8

TYPE OF FINISH UV Lacquered / UV Oiled / Brushed & UV Matt Lacquered

GRADE Rustic




UNDERFLOOR HEATING Suitable

TOG RATING 1.09

HARDNESS Hard

TRIM CODE Low U O M I B Q L E H D X S N J W Z

Raglan Oak Lacquered 34-ORL-001

£43.95/m2 £36.63/m2 EX VAT

Raglan Oak Oiled 34-ORO-001

£45.95/m2 £38.29/m2 EX VAT

Raglan Oak Brushed & Lacquered34-OBL-001

£45.95/m2 £38.29/m2 EX VAT



RAG

LAN

ENG

INEERED

Nimble cocoa swirls, right at your feet…43All prices include VAT REAL WOOD ENGINEERED


Raglan Oak Cognac Plank

RAG

LAN

ENG

INEERED




PACK SIZE 2.2m2

PLANKS PER PACK 8


GRADE Rustic





TOG RATING 1.09

HARDNESS Hard


Raglan Oak Cognac Brushed & Lacquered34-ORC-001

£51.95/m2 £43.29/m2 EX VAT

Smooth, molten shades of Autumn…



Raglan Oak White Oiled Plank

RAG

LAN

ENG

INEERED




PACK SIZE 2.2m2

PLANKS PER PACK 8

TYPE OF FINISH UV Oiled

GRADE Rustic





TOG RATING 1.09

HARDNESS Hard


Raglan Oak White Oiled 34-OWO-001

£51.95/m2 £43.29/m2 EX VAT

Dappled light sandy strokes, evoking a holiday ambience…



Raglan Oak Antique Plank

RAG

LAN

ENG

INEERED




PACK SIZE 2.2m2

PLANKS PER PACK 8


GRADE Rustic





TOG RATING 1.09

HARDNESS Hard


Raglan Oak Antique Oiled 34-OAO-001

£51.95/m2 £43.29/m2 EX VAT

A complex and achieved timber, aged to a sumptuous finish…



RAG

LAN

ENG

INEERED

Raglan Oak White Smoked Plank




PACK SIZE 2.2m2

PLANKS PER PACK 8


GRADE Rustic





TOG RATING 1.09

HARDNESS Hard


Raglan White Smoked Brushed & Lacquered34-OWS-001

£51.95/m2 £43.29/m2 EX VAT

White chocolate in effect, brushed for subtle texture…



Raglan Oak Co�ee Plank

RAG

LAN

ENG

INEERED




PACK SIZE 2.2m2

PLANKS PER PACK 8


GRADE Rustic





TOG RATING 1.09

HARDNESS Hard

TRIM CODE Low U O M I B Q L E H D X I N J W Z

Raglan Oak Co�ee Brushed & Lacquered34-OCL-001

£51.95/m2 £43.29/m2 EX VAT

Elegant yet hard wearing, stylish in essence…



RAG

LAN

ENG

INEERED

Raglan Maple Select Plank




PACK SIZE 1.05m2

PLANKS PER PACK 7


GRADE Select




UNDERFLOOR HEATING Not Advised

TOG RATING 1.12

HARDNESS Hard


Raglan Maple Select Lacquered34-MAL-002

£61.95/m2 £51.63/m2 EX VAT

Fresh and bright in nature…



Raglan Walnut Plank

RAG

LAN

ENG

INEERED




PACK SIZE 1.05m2

PLANKS PER PACK 7


GRADE Rustic





TOG RATING 1.1

HARDNESS Medium


Raglan Walnut Lacquered 34-WAL-002

£61.95/m2 £51.63/m2 EX VAT

Exotic and rich boards…



HA

RLECH

ENG

INEERED

4MM WEAR LAYER


ENGINEERED SOFTWOOD CORE


Page 52 Page 61Page 54 Page 60Page 56 Page 57

TRIMS AVAILABLE See Pages 152-5 FLOOR CARE See Page 165

Page 59 Page 62 Page 64 Page 58

15mmN.B: Symbols exclude Harlech Eco-Oak Lacquered 3-Strip

Where once sea lapped the castle walls and bold defenders were immortalised in song, Harlech is a well-known stronghold of symbolic and historical importance. Our range humbly exemplifi es its culture as our most practical, valuable and popular wood fl oor.

• Respectable 4mm solid hardwood top layer • Finishes include lacquered, oiled, or brushed & lacquered• 13 natural or stained fl oors to complement most decors• Compatible with underfl oor heating when stuck down

HARLECHELEGANT, PRACTICAL AND VERSATILE



Harlech Eco-Oak 3-Strip

HA

RLECH

ENG

INEERED




PACK SIZE 1.587m2

PLANKS PER PACK 8


GRADE Rustic





TOG RATING 1.09

HARDNESS Hard


Harlech Eco-Oak Lacquered 3-Strip35-HOE-300

£32.95/m2 £27.46/m2 EX VAT

A sustainable choice, healthy for all…



HA

RLECH

ENG

INEERED

Harlech Oak White Oiled Plank

5 coats of the chosen finish give maximum wear...


THICKNESS 15mm (wear layer 4mm)

LENGTH X WIDTH 1860mm x 148mm can be one cut length per pack

PACK SIZE 1.65m2

PLANKS PER PACK 6


GRADE Rustic



METHOD OF FIXING Floated, nailed or stuck down

UNDERFLOOR HEATING Suitable if fully stuck down

TOG RATING 1.13

HARDNESS Hard


Harlech Oak White Oiled 35-HWO-148

£59.95/m2 £49.96/m2 EX VAT



Harlech Oak Rustic Plank

HA

RLECH

ENG

INEERED




PACK SIZE 1.65m2

PLANKS PER PACK 6

TYPE OF FINISH UV Oiled / Brushed & UV Matt Lacquered

GRADE Rustic





TOG RATING 1.13

HARDNESS Hard


Harlech Oak Oiled 35-HOC-148

£49.95/m2 £41.63/m2 EX VAT

Harlech Oak Brushed & Lacquered35-HOB-001

£51.95/m2 £43.29/m2 EX VAT



HA

RLECH

ENG

INEERED

Focused in nature, engineered to last…55All prices include VAT REAL WOOD ENGINEERED


HA

RLECH

ENG

INEERED

Harlech White Smoked Plank

Sophisticated, elegant with the allure of the unexpected...




PACK SIZE 1.65m2

PLANKS PER PACK 6


GRADE Rustic





TOG RATING 1.13

HARDNESS Hard


Harlech Oak White Smoked Brushed & Lacquered35-HWS-001

£61.95/m2 £51.63/m2 EX VAT



HA

RLECH

ENG

INEERED

Harlech Oak Cognac Plank

Harlech captures the full tradition of wood flooring...




PACK SIZE 1.65m2

PLANKS PER PACK 6


GRADE Rustic





TOG RATING 1.13

HARDNESS Hard


Harlech Oak Cognac Brushed & Lacquered35-HOC-001

£59.95/m2 £49.96/m2 EX VAT



HA

RLECH

ENG

INEERED

Harlech Antique Oiled Plank

With its long lengths and bevelled edges...




PACK SIZE 1.65m2

PLANKS PER PACK 6


GRADE Rustic





TOG RATING 1.13

HARDNESS Hard


Harlech Oak Antique Oiled 35-HAN-148

£61.95/m2 £51.63/m2 EX VAT

Timeless style with a character of its own…



HA

RLECH

ENG

INEERED

Harlech Walnut Plank

Combining choice with beauty and practicality...




PACK SIZE 1.65m2

PLANKS PER PACK 6


GRADE Rustic





TOG RATING 1.19

HARDNESS Medium


Harlech Walnut Lacquered35-HWL-001

£79.95/m2 £66.63/m2 EX VAT



HA

RLECH

ENG

INEERED

Harlech Oak Wide Plank




PACK SIZE 2.1m2

PLANKS PER PACK 6


GRADE Rustic





TOG RATING 1.13

HARDNESS Hard


Bringing nature right into your room...

Harlech Oak Oiled (Wide)35-HRO-001

£51.95/m2 £43.29/m2 EX VAT



HA

RLECH

ENG

INEERED

Harlech Select Oak Plank

Traditional tongue and groove on 4 edges for maximum stability...




PACK SIZE 2.1m2

PLANKS PER PACK 6


GRADE Select





TOG RATING 1.13

HARDNESS Hard


Harlech Select Oak Oiled 35-HOO-005

£61.95/m2 £51.63/m2 EX VAT

Harlech Select Oak Lacquered35-HOL-001

£61.95/m2 £51.63/m2 EX VAT



HA

RLECH

ENG

INEERED

Harlech Limed Oak Plank




PACK SIZE 2.1m2

PLANKS PER PACK 6


GRADE Rustic





TOG RATING 1.13

HARDNESS Hard


Harlech Limed Oak Brushed & Lacquered35-HLO-001

£58.95/m2 £49.13/m2 EX VAT



HA

RLECH

ENG

INEERED

Tumbling hues of sun and sand…63All prices include VAT REAL WOOD ENGINEERED


HA

RLECH

ENG

INEERED

Harlech Smoked Oak Plank



LENGTH X WIDTH 1860mm x 189mmcan be one cut length per pack

PACK SIZE 2.1m2

PLANKS PER PACK 6


GRADE Rustic





TOG RATING 1.13

HARDNESS Hard


Harlech Smoked Oak Oiled 35-HSO-001

£55.95/m2 £46.63/m2 EX VAT

Eternally experienced, this timber has witnessed history…

64 REAL WOOD ENGINEERED All prices include VAT


HA

RLECH

MA

GN

UM

ENG

INEERED

6MM WEAR LAYER


ENGINEERED PLYWOOD CORE


TRADITIONAL BEVELLED EDGES

Page 66 Page 68

21mm

As grandfather to the Harlech range, this product is known for its formidable nature while still maintaining its practical roots. As a fl oor it represents the original Harlech of legend, with higher walls ready to withstand the longest siege in British history.

• Superior 21mm overall thickness (structurally suitable) • 6mm top layer of solid oak (equal to a solid oak board)• Available unfi nished, lacquered or brushed and oiled• Improved width specifi cations of up to 240mm

HARLECH MAGNUMSUPERIOR, ENDURING AND ECONOMICAL


65REAL WOOD ENGINEEREDAll prices include VAT


Harlech Magnum Oak Plank

HA

RLECH

MA

GN

UM

ENG

INEERED



LENGTH X WIDTH 1860mm x 189mm one cut length per pack

PACK SIZE 2.11m2

PLANKS PER PACK 6

TYPE OF FINISH UV Matt Lacquered / Brushed & UV Oiled / Unfinished

GRADE Rustic





TOG RATING 1.2

HARDNESS Hard


Harlech Magnum Oak Lacquered 35-HML-001

£67.95/m2 £56.63/m2 EX VAT

Harlech Magnum Oak Brushed & Oiled 35-HBO-001

£69.95/m2 £58.29/m2 EX VAT

Harlech Magnum Oak Unfinished 35-HMU-001

£61.95/m2 £51.63/m2 EX VAT



HA

RLECH

MA

GN

UM

ENG

INEERED

Flawless style merging with timeless elegance…



HA

RLECH

MA

GN

UM

ENG

INEERED

Harlech Magnum Oak Plank (Wide)




PACK SIZE 2.11m2

PLANKS PER PACK 4

TYPE OF FINISH Brushed & UV Oiled

GRADE Rustic





TOG RATING 1.2

HARDNESS Hard


Harlech Magnum Oak Brushed & Oiled (Wide)35-HBO-002

£79.95/m2 £66.63/m2 EX VAT

Wide, harmonious boards, presented in relaxed tones…



BERKELEYEN

GIN

EERED

15mm

4MM WEAR LAYER



ENGINEEERED PLYWOOD CORE

Page 70 Page 72 Page 73 Page 74 Page 76

The bastion commanding the Berkeley area has a violent history, full of legends and mysteries, yet it has lived on in the same family for 24 generations. We don’t expect you to wait as long for a floor of the same character, so each Berkeley board is aged and distressed to imitate this great heritage.

• Sympathetically aged and antiqued for a characterful finish • Lovingly hand-scraped to emulate the footfall of thousands of feet • Double smoked to create its inviting and warm bourbon tones* • Each board encounters 7 stages in achieving its period accents • Compatible with underfloor heating when fully stuck-down

BERKELEYINVITING, DISTINCTIVE AND VINTAGE

* excludes Berkeley Distressed Natural Oak

AGED AND DISTRESSED FINISH TRIMS AVAILABLE See Pages 152-5



BERKELEYEN

GIN

EERED

Berkeley Distressed Natural Oak




PACK SIZE 2.11m2

PLANKS PER PACK 6


GRADE Extra Rustic





TOG RATING 1.13

HARDNESS Hard


Berkeley Distressed Natural Oak38-BON-004

£66.95/m2 £55.79/m2 EX VAT

Carefully crafted to match generations of use…Due to the techniques used for distressing the amount of dark filler used varies considerably



BERKELEYEN

GIN

EERED




PACK SIZE 2.11m2

PLANKS PER PACK 6


GRADE Extra Rustic





TOG RATING 1.13

HARDNESS Hard


Berkeley Distressed White Oak

Berkeley Distressed White Oak38-BWO-005

£66.95/m2 £55.79/m2 EX VAT

A legacy of nature … Due to the techniques used for distressing the amount of dark filler used varies considerably



BERKELEYEN

GIN

EERED

Berkeley Distressed Washed Oak




PACK SIZE 2.11m2

PLANKS PER PACK 6


GRADE Extra Rustic





TOG RATING 1.13

HARDNESS Hard


Berkeley Distressed Washed Oak38-BOW-002

£66.95/m2 £55.79/m2 EX VAT

Ambient, cosy and sheltered from the elements…Due to the techniques used for distressing the amount of dark filler used varies considerably



BERKELEYEN

GIN

EERED




PACK SIZE 2.11m2

PLANKS PER PACK 6


GRADE Extra Rustic





TOG RATING 1.13

HARDNESS Hard

TRIM CODE Medium U O M I B Q L E H D D S N J W Z

Berkeley Distressed Smoked Oak

Berkeley Distressed Smoked Oak38-BOS-003

£66.95/m2 £55.79/m2 EX VATWeathered boards that have stood

the test of time… Due to the techniques used for distressing the amount of dark filler used varies considerably



BERKELEYEN

GIN

EERED

Berkeley Distressed Montana Oak




PACK SIZE 2.11m2

PLANKS PER PACK 6


GRADE Extra Rustic





TOG RATING 1.13

HARDNESS Hard


Berkeley Distressed Montana Oak38-BOM-001

£66.95/m2 £55.79/m2 EX VAT

Due to the techniques used for distressing the amount of dark filler used varies considerably



BERKELEYEN

GIN

EERED

The natural state of style…75REAL WOOD ENGINEEREDAll prices include VAT


BERKELEYEN

GIN

EERED

Berkeley Distressed Burnt Oak




PACK SIZE 2.11m2

PLANKS PER PACK 6


GRADE Extra Rustic





TOG RATING 1.13

HARDNESS Hard

TRIM CODE Medium U O M I B D L E H D X S N J W Z

Berkeley Distressed Burnt Oak38-BOA-006

£66.95/m2 £55.79/m2 EX VAT

Caressing textures, in a heritage board…Due to the techniques used for distressing the amount of dark filler used varies considerably



4MM WEAR LAYER

ENGINEERED PLYWOOD CORE

5 COATS OF UV LACQUER

TONGUE & GROOVE JOINT

Page 78 Page 80

GO

OD

RICH

ENG

INEERED

15mm

Parquetry’s origins begin with the medieval practice of raising seated noblemen over basic stone floors using decorative wooden planking. Goodrich parquet floor patterns continue this tradition and transport you to a di�erent era.

• A traditional floor with sophisticated design possibilities • Pre-finished blocks for convenient and quick installation • Brushed surface to replicate natural properties of wood • Compatible with underfloor heating when stuck-down

GOODRICHSTATELY, ENDURING AND ADAPTABLE

BRUSHED AND LACQUERED FINISH TONGUE & GROOVE JOINT



GO

OD

RICH

ENG

INEERED

Goodrich Herringbone Natural Oak




PACK SIZE 1.3m2

PLANKS PER PACK 36


GRADE Rustic





TOG RATING 1.13

HARDNESS Hard


Goodrich Herringbone Natural Oak32-GNA-001

£69.95/m2 £58.29/m2 EX VAT

Traditional artistry, discovered in great halls and manors…



GO

OD

RICH

ENG

INEERED

Goodrich Herringbone Co�ee Oak




PACK SIZE 1.3m2

PLANKS PER PACK 36


GRADE Rustic





TOG RATING 1.13

HARDNESS Hard


Goodrich Herringbone Co�ee Oak32-GCO-001

£69.95/m2 £58.29/m2 EX VAT

Reflecting the rich aroma of freshly ground beans…



GO

OD

RICH

ENG

INEERED

Goodrich Herringbone Whitened Oak




PACK SIZE 1.3m2

PLANKS PER PACK 36


GRADE Rustic





TOG RATING 1.13

HARDNESS Hard


Goodrich Herringbone Whitened Oak32-GWH-001

£69.95/m2 £58.29/m2 EX VAT

Hale and hearty planks, set to the sounds of the sea…



WIN

DSO

REN

GIN

EERED

4MM WEAR LAYER


GLUELESS LOC JOINT

ENGINEERED SOFTWOOD CORE

FLOAT OVER AN UNDERLAY

Page 82 Page 84

GLUELESS LOC SYSTEM

Page 88Page 86 Page 87Page 85

Windsor is the oldest and largest occupied castle in the world, home to royals and meeting place of the most senior order of British chivalry. Windsor fl ooring exemplifi es the heraldry and continuing functional pedigree of this truly national treasure.

• Glueless ‘Loc’ system for a seamless installation• Resiliently fi nished with 6 coats of UV lacquer or oil • Superior appearance with notable lengths of 2200mm• Suitable for both domestic and commercial environments

WINDSORCONFIDENT, FUNCTIONAL AND RESPLENDANT



Windsor Oak Rustic 3-Strip

Renowned for its superior appearance and high specification...

WIN

DSO

REN

GIN

EERED




PACK SIZE 3.587m2

PLANKS PER PACK 9

TYPE OF FINISH Lacquered

GRADE Rustic





TOG RATING 1.13

HARDNESS Hard


Windsor Oak Lacquered 3-Strip46-WOU-003

£39.98/m2 £33.32/m2 EX VAT



WIN

DSO

REN

GIN

EERED

Windsor Oak Rustic Plank

A premium quality floor...




PACK SIZE 3.203m2

PLANKS PER PACK 8


GRADE Rustic





TOG RATING 1.13

HARDNESS Hard


Windsor Oak Lacquered 46-WOL-001

£69.95/m2 £58.29/m2 EX VAT

Windsor Oak Oiled 46-WOO-001

£69.95/m2 £58.29/m2 EX VAT



Modern, cool and clean...

Windsor Oak Bevelled Plank

WIN

DSO

REN

GIN

EERED




PACK SIZE 3.203m2

PLANKS PER PACK 8


GRADE Rustic


BEVELS ON EDGES 2 long edges



TOG RATING 1.13

HARDNESS Hard


Windsor Oak Oiled (Bevelled)46-WOB-001

£75.95/m2 £63.29/m2 EX VAT



WIN

DSO

REN

GIN

EERED

Windsor DarkOiled Plank

A warm blend of the traditional and the contemporary...




PACK SIZE 3.203m2

PLANKS PER PACK 8


GRADE Rustic





TOG RATING 1.13

HARDNESS Hard


Windsor Oak Dark Oiled 46-WDO-001

£75.95/m2 £63.29/m2 EX VAT



Windsor WhiteOiled Plank

Whitened for sophistication and a contemporary feel...

WIN

DSO

REN

GIN

EERED




PACK SIZE 3.203m2

PLANKS PER PACK 8


GRADE Rustic





TOG RATING 1.13

HARDNESS Hard

TRIM CODE Medium U O M I B Q I E H D X S N J W Z

Windsor Oak White Oiled 46-WWO-001

£75.95/m2 £63.29/m2 EX VAT



WIN

DSO

REN

GIN

EERED

Windsor Merbau 3-Strip

Warm, hard-wearing and practical for any situation...




PACK SIZE 3.203m2

PLANKS PER PACK 8


GRADE Rustic





TOG RATING 1.13

HARDNESS Very Hard


Windsor Merbau Lacquered 3-Strip46-WME-003

£59.95/m2 £49.96/m2 EX VAT



Windsor Maple 3-Strip

WIN

DSO

REN

GIN

EERED



LENGTH X WIDTH 2200mm x 182mmone cut length per pack

PACK SIZE 3.203m2

PLANKS PER PACK 8


GRADE Rustic




UNDERFLOOR HEATING Not Advised

TOG RATING 1.15

HARDNESS Hard


Windsor Maple Lacquered 3-Strip46-WMC-003

£59.95/m2 £49.96/m2 EX VAT

Continental history fused with contemporary vision…



CH

EPSTOW

ENG

INEERED

6MM WEAR LAYER

5 COATS OF HARDWAX OIL

PLYWOOD CORE


BEVELLED EDGES

21mm

Page 90 Page 94 Page 92 Page 95 Page 96 Page 97 Page 98 Page 99 Page 100 Page 101

Chepstow, the oldest surviving medieval fortifi cation in Britain has wooden doors on site that are over 800 years old. Our range of planks are aged to mirror that antiquity, yet they are just as durable and will be for generations to come.

• Superior 21mm board with a generous 6mm wear layer• Available in 3 distinct fi nishes: Planed, Distressed and Sawn• Aged to mimic the historical provenance of timber fl oors• Supremely individual and distinguished in appearance

CHEPSTOWRUGGED, ORIGINAL AND BEAUTIFUL




Chepstow Planed Natural Oak

CH

EPSTOW

ENG

INEERED




PACK SIZE 2.11m2

PLANKS PER PACK 6

TYPE OF FINISH UV Hardwax Oil

GRADE Rustic





TOG RATING 1.2

HARDNESS Hard


Chepstow Planed Natural Oak65-PON-001

£81.95/m2 £68.29/m2 EX VAT

Sumptuous quality in a premium floor…



CH

EPSTOW

ENG

INEERED

Chepstow Planed Whitened Oak

A light white stain with this rustic floor makes it characterful and yet contemporary...




PACK SIZE 2.11m2

PLANKS PER PACK 6


GRADE Rustic





TOG RATING 1.2

HARDNESS Hard


Chepstow Planed Whitened Oak65-POW-001

£81.95/m2 £68.29/m2 EX VAT






PACK SIZE 2.11m2

PLANKS PER PACK 6


GRADE Rustic





TOG RATING 1.2

HARDNESS Hard


Chepstow Planed Antique Oak

The dark stain highlights the beauty of the grain pattern...

CH

EPSTOW

ENG

INEERED

Chepstow Planed Antique Oak65-POA-001

£81.95/m2 £68.29/m2 EX VAT



CH

EPSTOW

ENG

INEERED



CH

EPSTOW

ENG

INEERED

Chepstow Planed Grey Oak




PACK SIZE 2.11m2

PLANKS PER PACK 6


GRADE Rustic





TOG RATING 1.2

HARDNESS Hard


Chepstow Planed Grey Oak65-POG-001

£81.95/m2 £68.29/m2 EX VAT

Hints of ageless flair…



CH

EPSTOW

ENG

INEERED

Chepstow Sawn Natural Oak

Due to the techniques used for distressing there can be some roughness on the surface of the floor




PACK SIZE 2.11m2

PLANKS PER PACK 6


GRADE Rustic





TOG RATING 1.2

HARDNESS Hard


Chepstow Sawn Natural Oak65-SON-001

£99.95/m2 £83.29/m2 EX VAT

Heritage fresh from the saw…



Chepstow Sawn Grey Oak


CH

EPSTOW

ENG

INEERED




PACK SIZE 2.11m2

PLANKS PER PACK 6


GRADE Rustic





TOG RATING 1.2

HARDNESS Hard


Chepstow Sawn Grey Oak65-SOG-001

£99.95/m2 £83.29/m2 EX VAT

A pioneering timber, cut in classic style



Chepstow Sawn Bronzed Oak


CH

EPSTOW

ENG

INEERED




PACK SIZE 2.11m2

PLANKS PER PACK 6


GRADE Rustic





TOG RATING 1.2

HARDNESS Hard


Chepstow Sawn Bronzed Oak65-SOB-001

£99.95/m2 £83.29/m2 EX VAT

In tune with the earth and tracked in nature…



CH

EPSTOW

ENG

INEERED


Chepstow Distressed Charcoal Oak


These floors are smoked to age the timber.Stains and waxes are then lovingly applied by hand...




PACK SIZE 1.444m2

PLANKS PER PACK 4


GRADE Rustic





TOG RATING 1.2

HARDNESS Hard


Chepstow Distressed Charcoal Oak65-AOC-001

£99.95/m2 £83.29/m2 EX VAT


Double smoked to give a light grey stone washed effect, combined with the ageing...

CH

EPSTOW

ENG

INEERED




PACK SIZE 1.444m2

PLANKS PER PACK 4


GRADE Rustic





TOG RATING 1.2

HARDNESS Hard


Chepstow Distressed White Smoked Oak


Chepstow Distressed White Smoked Oak65-AWS-001

£99.95/m2 £83.29/m2 EX VAT

All prices include VAT 99REAL WOOD ENGINEERED

These floors are smoked to age the timber.Stains and waxes are then lovingly applied by hand...


CH

EPSTOW

ENG

INEERED

Chepstow Distressed Natural Oak


Chepstow Distressed Natural Oak65-AON-001

£99.95/m2 £83.29/m2 EX VAT




PACK SIZE 1.444m2

PLANKS PER PACK 4


GRADE Rustic





TOG RATING 1.2

HARDNESS Hard


Worked edges reflecting the wear of many feet, big and small…



Exuding a lovely blend of honeyed tones...

Chepstow Distressed Sienna Oak





PACK SIZE 1.444m2

PLANKS PER PACK 4


GRADE Rustic





TOG RATING 1.2

HARDNESS Hard


Chepstow Distressed Sienna Oak65-AOS-001

£99.95/m2 £83.29/m2 EX VAT

CH

EPSTOW

ENG

INEERED



DESIGNER COLLECTIONBRINGING EXTRAORDINARY BEAUTY TO YOUR HOME D

ESIGN

ER

Every Woodpecker fl oor is truly unique; no two trees are ever the same. Timber is such a versatile material that it can be treated in many di� erent ways to produce some truly remarkable fi nishes. As well as looking good, all our fl ooring is subject to the most stringent of practical criteria.

The exclusive fl oors overleaf go that little bit further by using creative methods to give you, the discerning buyer, a fl oor that is truly unique and special. Just like an expensive diamond or luxury car, the ‘Designer Collection’ brings you a variety of fl ooring to make your dream home a reality.

With this in mind we’ve scoured the world to discover exquisite

fl oors that have been created from both traditional and exotic tree species. As these fl oors are so unusual we don’t always hold them in stock, however, if you are looking for a fl oor that’s sure to impress they are more than worth the wait. To secure your order a deposit will be required and you should allow 4–8 weeks for delivery.

102 All prices include VATDESIGNER COLLECTION

AGD_RRP_13_Designer_Bamboo_Cork.indd 102 02/12/2013 10:00

ARU

ND

ELD

ESIGN

ER

4MM WEAR LAYER

GLUELESS LOC JOINT

SOFTWOOD CORE

FLOAT OVER AN UNDERLAYGLUELESS LOC SYSTEM


Arundel is a range of exclusive premium grade fl oor o� ering artistry, precision, and character. Using the highest quality material in both native and exotic species, this is a fl oor for the discerning and adventurous where quality and aesthetic values are of all importance.

• Carefully considered and sourced tree species • Subject to the most stringent quality control criteria • Superior appearance with notable lengths of 2200mm • Glueless locking system for a seamless installation

ARUNDELEXCLUSIVE, ELEGANT AND EXOTIC

103All prices include VAT DESIGNER COLLECTION


Arundel Walnut Plank

ARU

ND

ELD

ESIGN

ER




PACK SIZE 3.203m2

PLANKS PER PACK 8


GRADE Rustic





TOG RATING 1.19

HARDNESS Medium


Arundel Walnut Lacquered68-AWL-001

£171.95/m2 £143.29/m2 EX VAT

Arundel Walnut Oiled68-AWO-001

£171.95/m2 £143.29/m2 EX VAT

Luxurious strokes blending together in this sophisticated timber…

All prices include VATDESIGNER COLLECTION104


ARU

ND

ELD

ESIGN

ER

Arundel Jatoba Plank




PACK SIZE 3.203m2

PLANKS PER PACK 8


GRADE Rustic





TOG RATING 1.13

HARDNESS Very Hard


Arundel Jatoba Lacquered68-AJA-001

£129.95/m2 £108.29/m2 EX VAT

Honey flushed textures inspiring warmth and prosperity…

105DESIGNER COLLECTIONAll prices include VAT


Arundel Antique Oak

Arundel Washed Oak

Arundel Collection

ARU

ND

ELD

ESIGN

ER




PACK SIZE 3.203m2

PLANKS PER PACK 8


GRADE Rustic





TOG RATING 1.13

HARDNESS Hard

TRIM CODE Antique Oak - Medium U O M I B Q L E H D X S N J W Z

TRIM CODE Washed Oak - Medium U O M I B Q L E H D X S N J W Z

Arundel Antique Oak Brushed & Lacquered68-OAW-001

£89.95/m2 £74.96/m2 EX VAT

Arundel Washed Oak Brushed & Lacquered68-AOW-001

£89.95/m2 £74.96/m2 EX VAT

106 All prices include VATDESIGNER COLLECTION


ARU

ND

ELD

ESIGN

ER

Arundel Black Ash Plank




PACK SIZE 3.203m2

PLANKS PER PACK 8


GRADE Rustic





TOG RATING 1.13

HARDNESS Very Hard


107DESIGNER COLLECTIONAll prices include VAT

Arundel Black Ash Lacquered68-ABA-001

£121.95/m2 £101.63/m2 EX VAT


BAMBOOPRACTICAL, ECOLOGICAL AND BEAUTIFUL

BAM

BOO

Bamboo is an amazing material. In the Far East this unconventional grass is used for everything from bridges and sca� olding to luxurious bed linen. As a fl oor covering, bamboo is available in two varieties, laminated solid strips (Warwick™) or strand-woven bamboo fi bres (Style™).

Harvested from the Moso bamboo plant, this rapidly regenerating grass has a natural lifecycle of 5 years, making it one of the most sustainable materials known to man. When used in a strand-woven structure, each fl ooring plank has a tensile strength comparable to steel. It is by far the hardest wearing fl oor in our range and as a result, it is perfect for areas with high footfall.

With a variety of colours, styles and structures available, our bamboo fl ooring is designed to complement any interior, residential or commercial. Each plank is pre-fi nished with fi ve coats of UV scratch-resistant lacquer and is available as either a tongue and groove board or glueless ‘clic’ system.

108 BAMBOO All prices include VAT


WA

RWIC

KBA

MBO

O



LAMINATED BAMBOO STRIPS, VERTICAL OR HORIZONTAL

15mm

ROBUST TONGUE & GROOVE JOINT

Page 110

Lancelot ‘Capability’ Brown, or ‘England’s Greatest Gardener’, landscaped the picturesque castle gardens of Warwick. He left behind a legacy that our Warwick Bamboo fl oors strive for in their eco-friendly and carbon neutral manufacture.

• Constructed from laminated solid bamboo strips• Available in a choice of vertical or horizontal fusions• Choose between natural or carbonised co� ee tones• Designed to be stuck-down or secret nailed

WARWICKHARDWEARING, SOPHISTICATED AND CONSERVING

TRIMS AVAILABLE See Page 157

109BAMBOOAll prices include VAT


WA

RWIC

KBA

MBO

O

Warwick Bamboo Co�ee Plank

TYPE OF FLOOR Engineered Bamboo

THICKNESS 15mm


PACK SIZE 2.166m2

PLANKS PER PACK 24






TOG RATING 1.1

HARDNESS Hard

TRIM CODE Co�ee

Warwick Bamboo Co�ee (Vertical)26-CVM-004

£44.95/m2 £37.46/m2 EX VAT

Environmental origins in a robust board…

110 All prices include VATBAMBOO


WA

RWIC

KBA

MBO

O

Warwick Bamboo Natural Plank

TYPE OF FLOOR Engineered Bamboo

THICKNESS 15mm


PACK SIZE 2.166m2

PLANKS PER PACK 24






TOG RATING 1.1

HARDNESS Hard

TRIM CODE Natural

Warwick Bamboo Natural (Horizontal)26-NHM-004

£44.95/m2 £37.46/m2 EX VAT

A revitalising and sunny glow…

111All prices include VAT BAMBOO


STYLEBA

MBO

O


GLUELESS CLIC SYSTEM

STRAND WOVEN BAMBOO

12mm

GLUELESS CLIC SYSTEM


Style is more than just a look. It’s a capable, strong, and sustainable fl oor; manufactured using strand woven Moso bamboo. Fibrous strands from the bamboo cane are woven together and compressed under extreme conditions to form each stylish plank.

• Moso bamboo has a natural lifecycle of 5 years• Much higher Janka (hardness) rating than timber• Patented glueless ‘Loc’ system for easy installation• Style is a dense, strong and durable fl oor covering

STYLESUSTAINABLE, STYLISH AND STRONG

TRIMS AVAILABLE See Page 158



STYLEBA

MBO

O

Style Bamboo Natural Plank

TYPE OF FLOOR Strand Woven Bamboo

THICKNESS 12mm


PACK SIZE 1.532m2

PLANKS PER PACK 6


TYPE OF JOINT Glueless Clic




TOG RATING 1.1

HARDNESS Very Hard

TRIM CODE Natural

Style Bamboo Natural 20-SWN-001

£55.95/m2 £46.63/m2 EX VAT

Calm and cool, like a pagoda set on a mountain trail…



Style Bamboo Co�ee Plank

The strongest, most environmentally friendly floor you’ll ever find!

STYLEBA

MBO

O


THICKNESS 12mm


PACK SIZE 1.532m2

PLANKS PER PACK 6






TOG RATING 1.1

HARDNESS Very Hard

TRIM CODE Co�ee

Style Bamboo Co�ee 20-SWC-001

£55.95/m2 £46.63/m2 EX VAT



The strongest, most environmentally friendly floor you’ll ever find!

STYLEBA

MBO

O



STYLEBA

MBO

O

Style Bamboo Saddle Plank

A rich floor, sourced from regenerating bamboo grass…


THICKNESS 12mm


PACK SIZE 1.532m2

PLANKS PER PACK 6






TOG RATING 1.1

HARDNESS Very Hard

TRIM CODE Saddle

Style Bamboo Saddle 20-SSA-001

£59.95/m2 £49.96/m2 EX VAT



STYLEBA

MBO

O

Style Bamboo Whitened Plank


THICKNESS 12mm


PACK SIZE 1.532m2

PLANKS PER PACK 6






TOG RATING 1.1

HARDNESS Very Hard

TRIM CODE Whitened

Style Bamboo Whitened 20-SWH-001

£59.95/m2 £49.96/m2 EX VAT

Explore the peaceful Zen of this refined floor…



CORKADDING WARMTH AND LUXURY TO YOUR HOME

CORK

Estilo Cork is a breakthrough in innovative design and ecological sustainability. Not only is it an exceptionally beautiful fl oor covering but it has a remarkable list of benefi ts: warm and forgiving underfoot, naturally sound absorbent, easy to maintain and surprisingly resilient to impact thanks to its unique cellular structure.

Estilo materials are harvested every 9 years from the bark of the Quercus Suber Oak tree, a species native to the south Mediterranean. The tree is unharmed in the process and continues to naturally regenerate for up to 200 years. It thrives without herbicides, fertilisers or irrigation and is a valuable contributor to the prevention of soil erosion on the arid slopes and plains of southern Europe.

Estilo Flooring is suitable over both hot water and radiant underfl oor heating systems and is available in 5 colours as both a stick-down or fl oating fl oor. Its fi re retardant and anti-microbial qualities make it a healthy and practical fl oor for both home and o« ce.

*Cork will mellow and can change colour over time if exposed directly to UV light

118 All prices include VATCORK


CORK

HIGH WEAR RESISTANT UV LACQUER

CORK WEAR SURFACE

HDF CORE

INTEGRAL UNDERLAY

GLUELESS CLIC JOINT

11mm 5mm


IDEAL FOR USE WITH UNDERFLOOR HEATINGTRIMS AVAILABLE See Page 157

Estilo isn’t all about style: it’s a feeling, it’s about delivering quality and comfort underfoot without sacrificing sustainability. Estilo Cork is shaved from the Mediterranean Oak tree and is a great ecological alternative to wood flooring.

• Sourced from the extensive Cork forests of Portugal • Available as a glueless 'Clic' or stick-down floor • Thickness specification works well with underfloor heating • Warm underfoot and naturally sound absorbent

ESTILOWARM, COMFORTABLE AND RESILIENT

Estilo Estilo Fineline

ESTILO

119All prices include VAT CORK


ESTILOCO

RK

Estilo Madrid Cork Tile

TYPE OF FLOOR Engineered Cork

THICKNESS 11mm / 5mm

LENGTH X WIDTH 612mm x 440mm / 600mm x 450mm

PACK SIZE 1.62m2 / 8.1m2

TILES PER PACK 6 / 30


TYPE OF JOINT Glueless Clic / None


METHOD OF FIXING Floated or stuck down


TOG RATING 1.1 / 0.88


Estilo Madrid 24-EMA-004

£63.95/m2 £53.29/m2 EX VAT

Estilo Fineline Madrid 24-EMA-100

£49.95/m2 £41.63/m2 EX VAT

Painstakingly hand applied, layer by layer…



ESTILOCO

RK

Estilo Verona Cork Tile

No two tiles are the same – each floor becomes unique...













Estilo Verona 24-EVE-004

£55.95/m2 £46.63/m2 EX VAT

Estilo Fineline Verona24-EVE-100

£49.95/m2 £41.63/m2 EX VAT



ESTILOCO

RK

Estilo Helsinki Cork Tile

Looks like marble but with all the warmth and comfort of cork...

Estilo Helsinki 24-EHE-004

£63.95/m2 £53.29/m2 EX VAT

Estilo Fineline Helsinki24-EHE-100

£49.95/m2 £41.63/m2 EX VAT















ESTILOCO

RK



ESTILOCO

RK

Estilo Monte Carlo Cork Tile

Estilo Monte Carlo 24-EMC-004

£55.95/m2 £46.63/m2 EX VAT

Estilo Fineline Monte Carlo24-EMC-100

£49.95/m2 £41.63/m2 EX VAT













Tough, rural heritage in this smart floor…



Estilo Lisbon Cork Tile













Estilo Lisbon 24-ELI-004

£55.95/m2 £46.63/m2 EX VAT

Estilo Fineline Lisbon24-ELI-100

£49.95/m2 £41.63/m2 EX VAT

A creative patchwork crafted sustainably…

ESTILOCO

RK



LAMINATEDESIGNED FOR LIVING

OLSEN

LAM

INATE

126

Laminate fl ooring is the perfect solution for anyone wanting a real wood fl oor without the premium price tag. Olsen® is an a� ordable yet authentic alternative and is available in a wide variety of colours. From clean and contemporary white-washed boards to rustic and rural inspired designs: there’s something to suit every preference and any room.

Olsen fl oors use quality materials and advanced manufacturing methods to ensure the integrity of the product throughout its lifespan. The supporting core is constructed from premium High Density Fibreboard (HDF) for notable stability and resilience. Installation is fast, e� cient, robust and accessible thanks to a patented ‘Clic’ joint that allows for a glueless installation.

Olsen is AC3-rated for heavy domestic or light commercial use. Its protective scratch-resistant coating allows for routine maintenance to be performed with ease. Together with a 25-year warranty, we are confi dent you will enjoy an Olsen fl oor for many years to come.

All prices include VAT126 OLSEN

AGD_RRP_13_Olsen_126-151.indd 126 02/12/2013 10:02

OLSEN

Page 128 Page 130 Page 131 Page 132 Page 134 Page 136 Page 137 Page 138 Page 140 Page 141 Page 142 Page 143 Page 144 Page 146 Page 147 Page 148 Page 150

8mm

LAM

INATE

HIGH WEAR MELAMINE COATING

PRINTED WOOD FOIL

BALANCING MATERIAL

GLUELESS CLIC JOINT

HDF CORE

Olsen is pure practicality. Its designs and textures are true to life and are incredibly realistic – both in look and in price. Our laminate floors o�er exceptional value, with enough variety to suit any room, décor or purpose.

• Subtle textured finishes capture the essence of natural timber • Colour matched joints add authentic yet subtle definition • Patented glueless ‘Clic’ system for quick and easy fitting • Suitable for domestic and light commercial use (AC3 rated)

OLSENPRACTICAL, INSPIRING AND AFFORDABLE

TRIMS AVAILABLE See Page 156 FLOOR CARE See Page 165

127All prices include VAT OLSEN


Olsen White Strip28-OS1-240

£21.95/m2 £18.29/m2 EX VAT

TYPE OF FLOOR Laminate

THICKNESS 8mm


PACK SIZE 1.98m2

PLANKS PER PACK 8

TYPE OF FINISH Embossed Grain





TOG RATING 0.7

HARDNESS Hard

TRIM CODE 273

Olsen White Strip

OLSEN All prices include VAT

OLSEN

LAM

INATE

128


129OLSENAll prices include VAT

OLSEN

LAM

INATEA nimbus of light, glacial patterns…



THICKNESS 8mm


PACK SIZE 1.98m2

PLANKS PER PACK 8






TOG RATING 0.7

HARDNESS Hard

TRIM CODE 276

Olsen Coastal Oak

130 OLSEN All prices include VAT

OLSEN

LAM

INATE

Olsen Coastal Oak28-OS1-241

£21.95/m2 £18.29/m2 EX VAT

Envision the smell of salt in the air…



THICKNESS 8mm


PACK SIZE 1.98m2

PLANKS PER PACK 8



BEVELS ON EDGES 2 long edges



TOG RATING 0.7

HARDNESS Hard

TRIM CODE 999


Olsen Washed Oak

Olsen Washed Oak28-OS1-242

£21.95/m2 £18.29/m2 EX VAT

OLSEN

LAM

INATE

High, swirling stripes simulating an aged timber…



THICKNESS 8mm


PACK SIZE 1.98m2

PLANKS PER PACK 8






TOG RATING 0.7

HARDNESS Hard

TRIM CODE 277


Olsen Natural Strip28-OS1-243

£21.95/m2 £18.29/m2 EX VAT

Olsen Natural Strip

OLSEN

LAM

INATE



OLSEN

LAM

INATE

Variety and excitement, refreshed in this floor…



THICKNESS 8mm


PACK SIZE 1.98m2

PLANKS PER PACK 8






TOG RATING 0.7

HARDNESS Hard

TRIM CODE 259


Olsen Natural Oak28-OS1-244

£21.95/m2 £18.29/m2 EX VAT

Olsen Natural Oak

OLSEN

LAM

INATE



OLSEN

LAM

INATEBeauty at just the right price…



THICKNESS 8mm


PACK SIZE 1.98m2

PLANKS PER PACK 8






TOG RATING 0.7

HARDNESS Hard

TRIM CODE 110


Olsen Summer Oak

Olsen Summer Oak28-OS1-245

£21.95/m2 £18.29/m2 EX VAT

OLSEN

LAM

INATE

Sunshine, picnics and the lazy droning of bees…



THICKNESS 8mm


PACK SIZE 1.98m2

PLANKS PER PACK 8






TOG RATING 0.7

HARDNESS Hard

TRIM CODE 259


Olsen Cotswold Oak

Olsen Cotswold Oak28-OS1-246

£21.95/m2 £18.29/m2 EX VAT

OLSEN

LAM

INATE

Transports to picturesque landscapes, ideal for a quick escape…



THICKNESS 8mm


PACK SIZE 1.98m2

PLANKS PER PACK 8






TOG RATING 0.7

HARDNESS Hard

TRIM CODE 277


Olsen Prairie Oak28-OS1-247

£21.95/m2 £18.29/m2 EX VAT

Olsen Prairie Oak

OLSEN

LAM

INATE



OLSEN

LAM

INATE

The frontier experience, influenced by the Old West…



THICKNESS 8mm


PACK SIZE 1.98m2

PLANKS PER PACK 8






TOG RATING 0.7

HARDNESS Hard

TRIM CODE 392


Olsen Natural Sawn

Olsen Natural Sawn28-OS1-248

£21.95/m2 £18.29/m2 EX VAT

OLSEN

LAM

INATE

A stunning choice, engraved to match freshly cut wood…



THICKNESS 8mm


PACK SIZE 1.98m2

PLANKS PER PACK 8






TOG RATING 0.7

HARDNESS Hard

TRIM CODE 277


Olsen Vintage Oak

Olsen Vintage Oak28-OS1-249

£21.95/m2 £18.29/m2 EX VAT

OLSEN

LAM

INATE

An antique, mature legacy…



THICKNESS 8mm


PACK SIZE 1.98m2

PLANKS PER PACK 8






TOG RATING 0.7

HARDNESS Hard

TRIM CODE 277


Olsen Farmhouse Oak

Olsen Farmhouse Oak28-OS1-250

£21.95/m2 £18.29/m2 EX VAT

OLSEN

LAM

INATE

A hardworking, loyal household partner…



THICKNESS 8mm


PACK SIZE 1.98m2

PLANKS PER PACK 8






TOG RATING 0.7

HARDNESS Hard

TRIM CODE 401


Olsen Oak Cognac

Olsen Oak Cognac28-OS1-251

£21.95/m2 £18.29/m2 EX VAT

OLSEN

LAM

INATE

Deep in character and naturally mature…



THICKNESS 8mm


PACK SIZE 1.98m2

PLANKS PER PACK 8






TOG RATING 0.7

HARDNESS Hard

TRIM CODE 360


Olsen Dark Sawn28-OS1-253

£21.95/m2 £18.29/m2 EX VAT

Olsen Dark Sawn

OLSEN

LAM

INATE



OLSEN

LAM

INATE

New technology matched against classic style…



THICKNESS 8mm


PACK SIZE 1.98m2

PLANKS PER PACK 8






TOG RATING 0.7

HARDNESS Hard

TRIM CODE 401


Olsen Double Smoked

Olsen Double Smoked28-OS1-252

£21.95/m2 £18.29/m2 EX VAT

OLSEN

LAM

INATE

Vintage inspiration with complementing earthy tones…



THICKNESS 8mm


PACK SIZE 1.98m2

PLANKS PER PACK 8






TOG RATING 0.7

HARDNESS Hard

TRIM CODE 397


Olsen Burnt Oak

Olsen Burnt Oak28-OS1-255

£21.95/m2 £18.29/m2 EX VAT

OLSEN

LAM

INATE

Elemental and smoky grain …



THICKNESS 8mm


PACK SIZE 1.98m2

PLANKS PER PACK 8






TOG RATING 0.7

HARDNESS Hard

TRIM CODE 240


Olsen Black Walnut28-OS1-254

£21.95/m2 £18.29/m2 EX VAT

Olsen Black Walnut

OLSEN

LAM

INATE



OLSEN

LAM

INATE

Sophisticated, opulent atmospherics underlined with a touch of style…



THICKNESS 8mm


PACK SIZE 1.98m2

PLANKS PER PACK 8






TOG RATING 0.7

HARDNESS Hard

TRIM CODE 397


Olsen Midnight Silver28-OS1-256

£21.95/m2 £18.29/m2 EX VAT

Olsen Midnight Silver

OLSEN

LAM

INATE



OLSEN

LAM

INATE

Luxury and elegance in contrasting hues…


Low Twin Profile (For floors 10-13mm in depth)

Code Length RRP(inc. VAT)

11-T?L-990 0.99m £20.00

11-T?L-300 3.00m £59.00

11-T?L-990 0.99m £22.00

11-T?L-300 3.00m £63.00

11-T?L-990 0.99m £27.00

11-T?L-300 3.00m £80.00

Medium Twin Profile (For floors 15-18mm in depth)


11-T?M-990 0.99m £20.00

11-T?M-300 3.00m £59.00

11-T?M-990 0.99m £22.00

11-T?M-300 3.00m £63.00

11-T?M-990 0.99m £27.00

11-T?M-300 3.00m £80.00

High Twin Profile (For floors 18-22mm in depth)


11-T?H-990 0.99m £21.00

11-T?H-300 3.00m £61.00

11-T?H-990 0.99m £23.00

11-T?H-300 3.00m £67.00

11-T?H-990 0.99m N/A

11-T?H-300 3.00m N/A

Low Ramp Profile (For floors 10-13mm in depth)


11-R?L-990 0.99m £22.00

11-R?L-300 3.00m £63.00

11-R?L-990 0.99m £24.00

11-R?L-300 3.00m £72.00

11-R?L-990 0.99m £36.00

11-R?L-300 3.00m £106.00

Medium Ramp Profile (For floors 15-18mm in depth)


11-R?M-990 0.99m £22.00

11-R?M-300 3.00m £63.00

11-R?M-990 0.99m £24.00

11-R?M-300 3.00m £72.00

11-R?M-990 0.99m £36.00

11-R?M-300 3.00m £106.00

High Ramp Profile (For floors 18-22mm in depth)


11-R?H-990 0.99m £26.00

11-R?H-300 3.00m £77.00

11-R?H-990 0.99m £30.00

11-R?H-300 3.00m £88.00

11-R?H-990 0.99m N/A

11-R?H-300 3.00m N/A

CONTOUR™ SOLID WOOD PROFILES

Sometimes referred to as a T-Bar or Expansion, the Twin Profile is used to cover the expansion gap between two floors of equal height, providing a neat finish at doorways or serving as a room divider.

Otherwise known as an Adapter or Reducer, the Ramp Profile provides a smooth transition between two floors of varying height. It typically bridges larger transitions such as wood to vinyl floor coverings

TWIN PROFILE RAMP PROFILE

50

15

13

10.5

10

20 5

16

50

17

13.5

1020

10

16

50

17

18

20 10

10

17

60

15

10

6

10

30

14

62

1730

10

15

21

13

10

66

15

35

27

17

1618

10

B I M O U D E H N Q S X J W Z

Low � � � � � – � – � � � – � � –

Medium – � � � � � – � � � � � – � �

High – � – � � – � – – � – � – – �

NOTE: Surcharge on non-stock trims(Shown �)

152 ACCESSORIES All prices include VAT

AGD_RRP_13_Accessories_Onwards.indd 152 02/12/2013 10:06

The Semi-Ramp Profile is used to create a smooth transition between two floors of varying height, typically concealing minor transitions, such as wood to carpet.

Commonly referred to as an Edge, Square Edge or End Stop, the End Profile can be used as an attractive finish for an inset mat well. In some cases, it can also be used when a wooden floor meets patio doors.

SEMI RAMP PROFILE END PROFILE

High End Profile (For floors 18-22mm in depth)


11-E?H-990 0.99m £18.00

11-E?H-300 3.00m £53.00

11-E?H-990 0.99m £21.00

11-E?H-300 3.00m £62.00

11-E?H-990 0.99m N/A

11-E?H-300 3.00m N/A

Medium End Profile (For floors 15-18mm in depth)


11-E?M-990 0.99m £17.00

11-E?M-300 3.00m £50.00

11-E?M-990 0.99m £20.00

11-E?M-300 3.00m £59.00

11-E?M-990 0.99m £25.00

11-E?M-300 3.00m £74.00

Low End Profile (For floors 10-13mm in depth)


11-E?L-990 0.99m £17.00

11-E?L-300 3.00m £50.00

11-E?L-990 0.99m £20.00

11-E?L-300 3.00m £59.00

11-E?L-990 0.99m £25.00

11-E?L-300 3.00m £74.00

15

40

8 10

15

16

6

10

6

17

40

19

176

10

13

10

8

17

40

17

6

18

10

108

19

Low Semi-Ramp Profile (For floors 10-13mm in depth)


11-S?L-990 0.99m £22.00

11-S?L-300 3.00m £63.00

11-S?L-990 0.99m £24.00

11-S?L-300 3.00m £72.00

11-S?L-990 0.99m £36.00

11-S?L-300 3.00m £106.00

Medium Semi-Ramp Profile (For floors 15-18mm in depth)


11-S?M-990 0.99m £22.00

11-S?M-300 3.00m £63.00

11-S?M-990 0.99m £24.00

11-S?M-300 3.00m £72.00

11-S?M-990 0.99m £36.00

11-S?M-300 3.00m £106.00

High Semi-Ramp Profile (For floors 18-22mm in depth)


11-S?H-990 0.99m £26.00

11-S?H-300 3.00m £77.00

11-S?H-990 0.99m £30.00

11-S?H-300 3.00m £88.00

11-S?H-990 0.99m N/A

11-S?H-300 3.00m N/A

10

6

53

15

17

1513

10

8

9

8

55

167

171010

21

13

10

10

10

59

16

1713

27

1815

10

12

1512

SOLID WOOD PROFILES


Low � � � � � – � – � � � – � � –

Medium – � � � � � – � � � � � – � �

High – � – � � – � – – � – � – – �


153ACCESSORIESAll prices include VAT


Similar in style to the End Profile, minus the return edge, the Perimeter profile can also be used when a wooden floor meets patio doors. With the option to scribe its rear edge (if necessary), it is the ideal trim to finish a fireplace hearth.

The Stair Nosing Profile is used on steps and stairs to protect the edges of the flooring from the excessive wear caused by foot tra�c.

PERIMETER PROFILE STAIR NOSING PROFILE

High Perimeter Profile (For floors 18-22mm in depth)


11-P?H-990 0.99m £18.00

11-P?H-300 3.00m £53.00

11-P?H-990 0.99m £21.00

11-P?H-300 3.00m £62.00

11-P?H-990 0.99m N/A

11-P?H-300 3.00m N/A

Medium Perimeter Profile (For floors 15-18mm in depth)


11-P?M-990 0.99m £17.00

11-P?M-300 3.00m £50.00

11-P?M-990 0.99m £20.00

11-P?M-300 3.00m £59.00

11-P?M-990 0.99m £25.00

11-P?M-300 3.00m £74.00

Low Perimeter Profile (For floors 10-13mm in depth)


11-P?L-990 0.99m £17.00

11-P?L-300 3.00m £50.00

11-P?L-990 0.99m £20.00

11-P?L-300 3.00m £59.00

11-P?L-990 0.99m £25.00

11-P?L-300 3.00m £74.00

16

30

15

10

5

10

4

13

17

16

30

10

4

13

10

16

30

17

1610

4

18

10

16

SOLID WOOD PROFILES

Stair Nosing Profile


11-FW?-100 1.00m £32.00

11-FW?-300 3.00m £95.00

11-FW?-100 1.00m £36.00

11-FW?-300 3.00m £109.00

11-FW?-100 1.00m £46.00

11-FW?-300 3.00m £137.00

14

44

60

35

30

10

15

13

It’s not always possible to remove and refit skirting boards when fitting a wood floor. The Scotia & Quadrant Profiles are used around the edge of a room to hide the necessary expansion gaps.

SCOTIA & QUADRANT PROFILE

Scotia Profile


11-HS?-300 3.00m £18.00

11-HS?-300 3.00m £19.90

11-HS?-300 3.00m £31.0019

19

Quadrant Profile


11-HQ?-300 3.00m £19.90

11-HQ?-300 3.00m £21.50

11-HQ?-300 3.00m £33.9019

19


Low � � � � � – � – � � � – � � –

Medium – � � � � � – � � � � � – � �

High – � – � � – � – – � – � – – �




Made from solid oak and carefully pre-finished with several coats of tough lacquer, these traditional profiles will give your floor the finishing touch. Designed to be stuck to the subfloor, they create a neat and durable transition or edge to the floor.

You can select these trims from two different height and length specifications, in 15mm or 20mm heights, and 1m or 2.4m lengths. Profilo trims are great on a budget; especially when bridging multiple rooms and materials.

Medium & High Twin Profile (For floors 15 or 20mm in depth)


69-TOM-100 1.00m £18.00

69-TOM-240 2.40m £36.00

69-TOH-100 1.00m £22.00

69-TOH-240 2.40m £44.00

57

6

24 16.516.5

21

15

6

24 16.516.5

25

19

57

Medium & High Ramp Profile (For floors 15 or 20mm in depth)


69-ROM-100 1.00m £18.00

69-ROM-240 2.40m £36.00

69-ROH-100 1.00m £22.00

69-ROH-240 2.40m £44.00

57

20 101013

1924

57

2015

20 101013

Medium & High Semi Ramp Profile (For floors 15 or 20mm in depth)


69-SOM-100 1.00m £18.00

69-SOM-240 2.40m £36.00

69-SOH-100 1.00m £22.00

69-SOH-240 2.40m £44.0017

15

21

9

14.38.2

7.8

39.57.8

8.2 14.3

19

25

9

26

48.5

Medium & High End Profile (For floors 15 or 20mm in depth)


69-EOM-100 1.00m £18.00

69-EOM-240 2.40m £36.00

69-EOH-100 1.00m £22.00

69-EOH-240 2.40m £44.00

6

15

21

24 16

40.5

6

40.5

24 16

19

25

PROFILO™ SOLID OAK PROFILES



LAMINATE WOOD EFFECT PROFILES

Laminate trims are o�ered in a variety of colours to complement all floors within the Olsen range.

8

45

4.7

44

3.312

36

4.28

54

3.3

18

18

18

15

80

Trim Code OLSEN

273 Olsen White Strip

276 Olsen Coastal Oak

999 Olsen Washed Oak

277 Olsen Natural Strip

259 Olsen Natural Oak

110 Olsen Summer Oak

Trim Code OLSEN

259 Olsen Cotswold Oak

277 Olsen Prairie Oak

392 Olsen Natural Sawn

277 Olsen Vintage Oak

277 Olsen Farmhouse Oak

401 Olsen Oak Cognac

Trim Code OLSEN

360 Olsen Dark Sawn

401 Olsen Double Smoked

240 Olsen Black Walnut

397 Olsen Burnt Oak

397 Olsen Midnight Silver

Code Length(m)

RRP(inc. VAT)

40-EXP-??? 2.40 £27.95

Code Length(m)

RRP(inc. VAT)

40-EDG-??? 2.40 £27.95

Code Length(m)

RRP(inc. VAT)

40-SCO-??? 2.40 £5.95

Code Length(m)

RRP(inc. VAT)

40-RAM-??? 2.40 £27.95

Code Length(m)

RRP(inc. VAT)

40-STA-??? 2.40 £33.90

Code Length(m)

RRP(inc. VAT)

40-SKT-??? 2.40 £16.95

TWIN PROFILE

END PROFILE

SCOTIA PROFILE

RAMP PROFILE

STAIR NOSING PROFILE

SKIRTING



BAMBOO WARWICK® PROFILES

METAL GOLD / SILVER PROFILES

15

50

1020

10

15

50

19

19

Code Colour Length (m)

RRP(inc. VAT)

26-TSC-011 Co�ee 2.00 £27.00

26-TSN -010 Natural 2.00 £27.00


RRP(inc. VAT)

26-RDC-011 Co�ee 2.00 £27.00

26-RDN-010 Natural 2.00 £27.00


RRP(inc. VAT)

26-QRC-011 Co�ee 2.00 £13.00

26-QRN-010 Natural 2.00 £13.00

10

37

8


RRP(inc. VAT)

11-BTG-990 Gold 0.99 £12.00

11-BTS-990 Silver 0.99 £12.00

11-BTG-300 Gold 3.00 £35.00

11-BTS-300 Silver 3.00 £35.00

10

41


RRP(inc. VAT)

11-BRG-990 Gold 0.99 £12.00

11-BRS-990 Silver 0.99 £12.00

11-BRG-300 Gold 3.00 £35.00

11-BRS-300 Silver 3.00 £35.00

11

28


RRP(inc. VAT)

11-BEG-990 Gold 0.99 £12.00

11-BES-990 Silver 0.99 £12.00

11-BEG-300 Gold 3.00 £35.00

11-BES-300 Silver 3.00 £35.00

Code Height (mm)

Length (m)

RRP(inc. VAT)

09-ZBG-008 8 2.70 £18.00

09-ZBG-014 14 2.70 £18.00

TWIN PROFILETWIN PROFILE

RAMP PROFILE

END PROFILE

Z-BAR PROFILE

RAMP PROFILE

QUADRANT PROFILE



BAMBOO STYLE® PROFILES

16

45

1017.5

10


RRP(inc. VAT)

20-EXC-001 Co�ee 1.80 £25.00

20-EXN-001 Natural 1.80 £25.00

20-EXS-001 Saddle 1.80 £25.00

20-EXW-001 White 1.80 £25.00

TWIN PROFILE

45

12


RRP(inc. VAT)

20-RAC-001 Co�ee 1.80 £25.00

20-RAN-001 Natural 1.80 £25.00

20-RAS-001 Saddle 1.80 £25.00

20-RAW-001 White 1.80 £25.00

RAMP PROFILE

55

22


RRP(inc. VAT)

20-EGC-001 Co�ee 1.80 £25.00

20-EGN-001 Natural 1.80 £25.00

20-EGS-001 Saddle 1.80 £25.00

20-EGW-001 White 1.80 £25.00

END PROFILE

92

12


RRP(inc. VAT)

20-STC-001 Co�ee 1.80 £33.80

20-STN-001 Natural 1.80 £33.80

20-STS-001 Saddle 1.80 £33.80

20-STW-001 White 1.80 £33.80

STAIR NOSING PROFILE

19

13


RRP(inc. VAT)

20-QUC-001 Co�ee 1.80 £13.20

20-QUN-001 Natural 1.80 £13.20

20-QUS-001 Saddle 1.80 £13.20

20-QUW-001 White 1.80 £13.20

QUADRANT PROFILE



Code RRP(inc. VAT)

69-SKU-145 - Unfinished £54.00

69-SKO-145 - Lacquered £64.00

Code RRP(inc. VAT)

11-VOS-095 - Skirting £36.95

11-SKC-050 - Skirting Clips (Pack of 50) £21.00

Code RRP(inc. VAT)

40-SKT-??? - Trim code required for exact match £16.95

40-SKT-000 - White Skirting £16.95

Code Colour Per Pack

RRP(inc. VAT)

55-SPU-150 Unfinished 2 £9.95

55-SPO-150 Oak 2 £9.95

55-SPB-150 Beech 2 £9.95

55-SPC-150 Cherry 2 £9.95


RRP(inc. VAT)

06-PPO-150 Oak 4 £5.00

06-PPB-150 Beech 4 £5.00

06-PPC-150 Cherry 4 £5.00

06-PPM-150 Maple 4 £5.00


RRP(inc. VAT)

55-SPM-150 Maple 2 £9.95

55-SPR-150 Merbau 2 £9.95

55-SPW-150 Walnut 2 £9.95

55-SPA-150 Ash 2 £9.95


RRP(inc. VAT)

06-PPR-150 Merbau 4 £5.00

06-PPW-150 White 4 £5.00

ACCESSORIES SKIRTING & PIPE COVERSSKIRTING BOARDS

Skirting serves as a smooth transition from floor to wall with the intention of concealing expansions gaps and unsightly wiring.

SOLID OAK

Our dual purpose solid oak skirting allows you to choose between a Torus and Ogee profile. Made from rustic grade timber and available as either a lacquered or unfinished board. Finished size: 20 x 145 x 2400mm.

OAK VENEER

Our real oak veneered skirting o�ers a modern pencil round profile with a moulded rear rebate to conceal unsightly wires. Optional skirting clips are available for a glueless installation. Finished size: 16 x 95 x 2500mm.

LAMINATE

Our laminate skirting replicates a wide variety of species and colours to compliment the laminate floor of your choice. Simply order the quantity required and we will do the rest! Finished size: 15 x 80 x 2400mm.

PIPE COVERS

Pipe covers are used to conceal the necessary expansion gaps and unsightly imperfections around the base of your radiator pipes.

SOLID

Hardwood pipe covers are supplied in two halves with a unique jigsaw design that allows them to click together creating a seamless joint. Sold (pre-packed) as pairs, with a set inside diameter of 15mm. Available in 7 prefinished (lacquered) species as well as unfinished oak.

PLASTIC

Single piece, matt plastic pipe covers with laser incision for easy installation. Simply slide the ring around the pipe and allow to snap into position. Sold in packs of four and available in 6 di�erent colours with a set inside diameter of 15mm.



UNDERMATE

Similar in specification to the Floormate, this low tog version has been specifically designed for use with underfloor heating. When installing over underfloor heating please ensure a Damp Proof Membrane is installed first to prevent moisture migration. Tog Rating 0.55.

FLOORMATE

High performance rubber underlay incorporating a foil vapour barrier to prevent moisture migration. Designed to withstand heavy foot tra�c. The preferred option for all floating installations as it o�ers the best combination of comfort and support together with sound and thermal insulating properties.

SOLITEC

A specialist underlay with a strong self-adhesive backing that enables both a solid wood and engineered floor to be floated. No adhesive or nail gun required! Always use in conjunction with a Damp Proof Membrane (DPM) to protect against moisture migration.

ACOUSTAMAT

A slatted acoustic underlay to be used in combination with the WP50 Adhesive Sausages and Bulk Gun as part of a liquid batten system. The pre-cut areas provide a template for the adhesive and once installed it forms a reliable acoustic barrier. Ideal for use on uneven subfloors.

Code Depth(mm)

PerRoll

RRP(inc. VAT)

49-GBO-015 3 15m2 £24.95

Code Depth(mm)

PerRoll

RRP(inc. VAT)

49-FME-010 3.6 10m2 £46.95

49-FME-015 3.6 15m2 £68.95

Code Depth(mm)

PerRoll

RRP(inc. VAT)

49-GBP-015 3 15m2 £33.95

Code Depth(mm)

PerRoll

RRP(inc. VAT)

49-UME-010 3.6 10m2 £46.95

Code Depth(mm)

PerRoll

RRP(inc. VAT)

49-SSK-001 3 16.5m2 £84.95

Code Depth(mm)

PerRoll

RRP(inc. VAT)

49-STS-003 3 10m2 £84.95

UNDERLAY & BARRIERS CUSHION & PROTECT YOUR FLOOR

AQUASTOP

Designed especially for ground floor installations where excess moisture could be present. Similar in specification to the Basic 20, with the addition of a laminated Damp Proof Membrane (DPM) and 80mm overlap to ensure ultimate protection against moisture migration. A popular and economic solution when floating a floor. Tog Rating 0.84.

BASIC 20

Dense yet lightweight economy foam underlay o�ering a good degree of comfort and support with reasonable sound and thermal insulating properties. Minimal ability to correct subfloor irregularities. Ideal solution when cost is important and in areas where moisture issues are of no concern e.g. first floor bedrooms. Tog Rating 0.84.

DPM

DPM



Code Depth(mm)

PerPack

RRP(inc. VAT)

37-DPM-100 (4m x 25m)

1000 gauge

100m2 £74.95

DAMP PROOF MEMBRANE (DPM)

A durable membrane designed to be used in combination with a cushioning underlay to prevent the passage of moisture when floating a floor. Manufactured from high quality polyethylene (1000 gauge), it has been designed to provide superior strength and high puncture resistance.

DPM

MOISTOP BARRIER PAPER

Purpose made moisture resistant barrier paper for use when secret nailing a wooden floor over a timber based subfloor. The bitumen backing self-seals around the punctures formed by nails to maintain a watertight barrier and help to prevent cupping or moisture migration.

XL UNDERLAY

Disguises minor irregularities (up to 3mm) within the subfloor. Made from lightweight extruded polystyrene, the boards o�er exceptional sound and thermal insulation as well as moisture protection when taped together. Dimensions: 500 x 1200mm, 10 per pack. Tog Rating 1.1.

overlap edges by 250mm

Code Width(mm)

PerRoll

RRP(inc. VAT)

53-MBP-001 1000 25m2 £77.00

Code Depth(mm)

PerPack

RRP(inc. VAT)

49-WXL-001 6 6m2 £19.95

Code Size RRP(inc. VAT)

10-VPT-097 75mm x 25m £6.95

VAPOUR TAPE

This self-adhesive foil tape provides a vapour resistant seal when used to join Woodpecker underlay or membranes. As well as forming part of a moisture barrier, it can also be used to simply strengthen underlay joins. Single-sided tape with good instant adhesion.

BLUE DAMP PROOF BARRIER

An impermeable membrane designed to isolate a floor from damp substrates. Its dimpled surface allows for air flow beneath the barrier making it ideal for basements or recently screeded floors as it allows the substrate to dry out without delaying the installation. This doesn’t negate the need to check atmospheric humidity. Tog Rating 1.5.

• Cushioning and impact sound deadening• Unlike epoxy or resin liquid membranes, it won’t break down with any

subfloor movement• Allows for a maximum of 3mm variation in substrate height over 3m.• Supplied with an overlap on one edge to prevent moisture migration.• Sealing putty is designed to seal the edges of the room and around pipes.

DPMDPM

DPM

Code Size & Coverage

RRP(inc. VAT)

47-DPB-000 (DPM) 2.05m x 20m = 41m2 £381.95

47-WST-000 (Sealing Putty) 30mm x 20m £89.95



Code Size(kg)

Covers (approx)

RRP(inc. VAT)

31-SMS-099 16 16m2 £159.95

Code Size(kg)

CoversApprox

RRP(inc. VAT)

31-WPA-505 0.5 5m2 £7.60

Code Size(Litre)

CoversApprox

RRP(inc. VAT)

23-LDP-001 5 25m2 £153.95

Code Size(cc)

Covers RRP(inc. VAT)

23-LBS-001 600 2m2 £11.30

23-MAG-001 N/A N/A £48.95

Code Size(Litre)

Covers RRP(inc. VAT)

31-WSP-001 5 N/A £39.95

Code Size Product RRP(inc. VAT)

12-LXC-001 20kg Level-X £34.00

12-LXP-001 1L Primer £15.00

ADHESIVE & SEALANTS ADHESIVE & SUBFLOOR PREPARATION

MS PARQUET

A purpose-made adhesive developed specifically for use with Woodpecker floors. Designed to hold the boards after a short open time (30mins) but remains permanently flexible once cured to allow for the expansion and contraction of the timber between seasons.

WP50 SAUSAGES

A purpose-made adhesive designed for use with the slatted Acoustamat underlay as part of a liquid batten system. Remains permanently flexible once cured to allow for the expansion and contraction of the timber between seasons. Apply using a gun applicator.

FLOORING GRADE PVA

A premium flooring grade PVA adhesive for hardwood flooring. Typically used when floating a floor to bond tongue and groove (T&G) boards together. Easy to apply, solvent free and fully cured within four hours of application.

WP60 LIQUID DPM

A reliable liquid membrane designed to prevent residual moisture within a screed from penetrating a new timber floor. Apply using a roller for a seamless barrier. Fully cured within 30 minutes. Single coat application when used in combination with the Woodpecker MS Parquet Adhesive.

11P SURFACE PRIMER

High performance surface primer used to seal dusty or porous substrates in preparation for the Woodpecker MS Parquet adhesive, Woodpecker WP50 sausages, or the Woodpecker WP60 Liquid DPM. Improves adhesion on di�cult substrates.

LEVEL-X & PRIMER

A fibre-reinforced self-levelling compound designed to prepare and smooth surface irregularities. Application may vary from 2–50mm in a single pour. Substrates should be primed in advance to assist adhesion and prevent contamination.

DPM



LEVEL-X SELF-LEVELLING COMPOUND & PRIMER

A fi bre-reinforced self-levelling compound designed to prepare and smooth surface irregularities. Application may vary from 2-50mm in a single pour. Substrates should be primed in advance to assist adhesion and prevent contamination.

Preparation: The condition of the existing fl oor determines the fi nal strength of the compound. The surface should be fi rm, cohesive and free from loose particles, dust, dirt and grease.

Priming: Should not be done until the surface is prepared and dry enough that the primer adheres. Porous and impermeable surfaces should be treated with primer in di� erent proportions according to the instructions. The minimum ambient temperature is 6°C, the optimum is 10-18°C.

Mixing: Preferably done with an electric mixer or a mixing pump, until achieving an even smooth texture. Remains workable for approximately 30 minutes in optimum temperature.

Application to concrete, plaster, ceramic tiles, painted surfaces:Thickness 2-50mm.

Application to wooden fl oors: Thickness 5-50mm.

Application to heated fl oors: The compound must cover the heating cables by a minimum thickness of 5-10mm.

Building up a fall: A mix with reduced water content must be applied along the wall. The compound will fl ow towards the fl oor drain, which must be edged with a retaining strip to prevent blockage.

Finishing: The drying time will depend on the moisture content of the underlay. Normally, ceramic tiles can be laid after 6-12 hours. At least 12-18 hours should be allowed after a mix has been applied before damp proofi ng.

LEVEL-X FORMULA

Approx thickness of screed (mm) x 1.7Approx thickness of screed (mm) x 1.7 x m2 of fl oor = No.of bags 20 (kg)



FLOOR CARE LONG-TERM MAINTENANCE

Code Size(Litre)

Covers m2/L

RRP(inc. VAT)

81-OCS-002 2 N/A £41.90

Code Description Size(Litre)

Covers m2/L

RRP(inc. VAT)

08-OLW-084 Osmo Liquid Wax Cleaner 1 60 £30.95

08-OHO-083 Osmo Hardwax Oil 2.5 25-30 £99.95

08-OWC-085 Osmo Wash & Care 1 100 £20.95

Code Size(Litre)

Covers m2/L

RRP(inc. VAT)

81-OCC-001 1 N/A £27.90

Code Size(Litre)

Covers m2/L

RRP(inc. VAT)

81-OCO-001 1 (Pure) 40-50 £83.90

81-OCN-001 1 (Natural) 40-50 £103.90

Code Size(L)

Wear RRP(inc. VAT)

52-WUL-004 4 Normal £63.00

52-WUP-004 4 Heavy £85.00

ONE COAT SOAP

A concentrate cleaning solution for oiled floors. Dilute in 150mls of water for everyday use. Do not use for 3 weeks after restoring your floor with an application of One Coat Oil.

ONE COAT CLEANER

Used to clean and strip the surface of an oiled floor before applying the One Coat Oil. Drying time will vary from 15-60 mins depending on saturation.

ONE COAT OIL

This durable oil provides a new surface finish in simply one coat! The Pure finish will enhance the grain and enrich the natural colours of the timber while the Natural finish will leave the timber looking similar to its unfinished state.

ULTIMO FLOOR LACQUER

Silk Matt finish. Ideal for finishing wooden floors. Available in 2 grades depending on tra�c levels. Can be applied after intermediate sanding on most wax-free and fat-free surfaces. Covers 8-10m2/Litre..

OSMO FLOOR CARE

Osmo are a leading brand in wood floor protection. Wash and Care is a special cleaning concentrate for everyday use. The Liquid Wax Cleaner can be used for initial cleaning, maintaining and refreshing your floor. Osmo Hardwax Oil is a clear, satin-matt oil.



FLOOR CARE ROUTINE MAINTENANCE

Code Colour RRP(inc. VAT)

06-UCF-005 Oak £13.95

06-UCF-176 Dark Oak £13.95

06-UCF-043 Light Walnut £13.95

Code Size(ml)

Finish RRP(inc. VAT)

02-TUL-080 30 Silk Matt £12.00

02-TUL-081 30 Matt £12.00

Code Colour RRP(inc. VAT)

06-UCS-204 Light Oak £6.00

06-UCS-205 Off White / Light Maple £6.00

06-UCS-206 Light Oak / Beech £6.00

06-UCS-222 Medium Oak £6.00

06-UCS-231 Antique Oak £6.00

06-UCS-235 Cherry / Natural £6.00

Code Description Size(cl)

RRP(inc. VAT)

77-WKL-001 Kit For Lacquered Wood/ Laminate 80 £28.90

77-WKO-001 Kit For Oiled Wood 80 £28.90

77-WRC-001 Replacement Mop Head - Machine Washable – £11.90

77-WLC-001 Cleaner Refill For Lacquered Wood/ Laminate 80 £11.90

77-WOC-001 Cleaner Refill For Oiled Wood 80 £11.90

MAINTENANCE KIT

Specially formulated for the Woodpecker floors this comprehensive cleaning kit consists of an antistatic mop with detachable handle, mop head, cleaner fluid and trigger bottle.

Code Description Size Per Pack

RRP(inc. VAT)

05-FFP-951 Heavy Duty Felt Pads (Round) 19mm 20 £4.80



05-FFP-947 Heavy Duty Felt Pads (Various Sizes) Multipack - £11.50

05-FFP-950 Heavy Duty Felt Pads (Rectangular) 113x153mm 2 £7.50

05-FCC-363 Castor Cups - Light Wood Grain 44mm 2 £8.50

05-FCC-364 Castor Cups - Light Wood Grain 60mm 2 £9.50

05-FCC-361 Castor Cups - Dark Wood Grain 44mm 2 £8.50

05-FCC-362 Castor Cups - Dark Wood Grain 60mm 2 £9.50

FLOOR PROTECTORS

Prevention rather than cure is the key to a beautiful floor! Our variety of felt protectors and castor cups allow furniture to be moved with ease and without marking your floor.

Code Width(mm)

PerRoll

RRP(inc. VAT)

42-COI-010 1000 N/A £31.00

COLOURFILL REPAIR PASTE

50g tube with 20ml solvent bottle for Laminate floors.

TOUCH UP LACQUER

Used to conceal small indentations and scratches. Using the brush applicator supplied within the lid, paint the lacquer onto the a�ected area and leave to cure.

COIR MATTING

Coir matting should be an important consideration when laying a new floor. It should be used at each entrance as a barrier for wet and dirty feet to trap grit and prevent lasting damage. Grit underfoot will have the same e�ect as sandpaper against your new floor.

COLOURSEALANT MASTIC

310ml gunnable cartridge for Laminate floors.



VUSTAWHY NOT LOOK AT VUSTA DESIGN FLOORING?

Vusta Design Flooring replicates the beauty and texture of natural materials, using the same styles and designs such as planks and tiles with and without bevels, with light or heavily embossed surfaces and even with synchronised embossing, where the individual pores of the wood or stone are synchronised with the print of the grain to give an authentic look which is hard to di�erentiate from the real thing. It o�ers the ultimate mix of versatile design and a�ordable quality.

166 All prices include VATVUSTA

Ideal in living areas Perfect for wet rooms Suitable for commercial use


Visit our NEW website

www.vusta.co.uk

All prices include VAT 167VUSTA

For a small fee you can also upload your own room set photos

HOW THE ROOM DESIGNER WORKS:

• Visit www.vusta.co.uk to get started• Launch the Room Designer by

clicking on the icon• Select a room design• Choose your fl ooring• Change the wall colour• Select the laying angle• Include design strips?• Save, print or share your designs

Add design strips...

Change the wall colour...

Choose the fl oor...

ROOM DESIGNERVISUALISE YOUR LIVING SPACE ONLINE

Visit our NEW website

www.vusta.co.uk


PACK CALCULATORLET US DO THE HARD WORK FOR YOU...

RANGEPer Pack m2

1 2 3 4 5 6 7 8 9 10

SOLID

York 2.29 4.58 6.87 9.16 11.45 13.74 16.03 18.32 20.61 22.9

Dunster 140mm 1.68 3.36 5.04 6.72 8.4 10.8 11.76 13.44 15.12 16.8

Dunster 160mm 1.92 3.84 5.76 7.68 9.6 11.52 13.44 15.36 17.28 19.2

Dunster 180mm 2.16 4.32 6.48 8.64 10.8 12.96 15.12 17.28 19.44 21.6

Flink 1.5 3 4.5 6 7.5 9 10.5 12 13.5 15

Denbigh 230mm 1.06 2.12 3.18 4.24 5.3 6.36 7.42 8.48 9.54 10.6

Denbigh 280mm 0.98 1.96 2.94 3.92 4.9 5.88 6.86 7.84 8.82 9.8

ENGINEERED

Raglan Oak 2.2 4.4 6.6 8.8 11 13.2 15.4 17.6 19.8 22

Raglan Walnut & Maple 1.05 2.1 3.15 4.2 5.25 6.3 7.35 8.4 9.45 10.5

Harlech 3-Strip 1.587 3.174 4.761 6.348 7.935 9.522 11.109 12.696 14.283 15.87

Harlech 148mm 1.65 3.3 4.95 6.6 8.25 9.9 11.55 13.2 14.85 16.5

Harlech 189mm 2.1 4.2 6.3 8.4 10.5 12.6 14.7 16.8 18.9 21

Harlech Magnum 2.11 4.22 6.33 8.44 10.55 12.66 14.77 16.88 18.99 21.1

Harlech Magnum 240mm 2.11 4.22 6.33 8.44 10.55 12.66 14.77 16.88 18.99 21.1

Berkeley 2.11 4.22 6.33 8.44 10.55 12.66 14.77 16.88 18.99 21.1

Goodrich 1.3 2.6 3.9 5.2 6.5 7.8 9.1 10.4 11.7 13

Windsor 3-Strip 3.587 7.174 10.761 14.348 17.935 21.522 25.109 28.696 32.283 35.87

Windsor 3.203 6.406 9.609 12.812 16.015 19.218 22.241 25.624 28.827 32.03

Chepstow Planed 2.11 4.22 6.33 8.44 10.55 12.66 14.77 16.88 18.99 21.1

Chepstow Sawn 2.11 4.22 6.33 8.44 10.55 12.66 14.77 16.88 18.99 21.1

Chepstow Distressed 1.444 2.888 4.332 5.776 7.22 8.664 10.108 11.552 12.996 14.44

DESIGNER

Arundel 3.203 6.406 9.609 12.812 16.015 19.218 22.421 25.624 28.827 32.03

BAMBOO

Warwick 2.166 4.332 6.498 8.664 10.83 12.996 15.162 17.328 19.494 21.66

Style 1.532 3.064 4.596 6.128 7.66 9.192 10.724 12.256 13.788 15.32

CORK

Estilo 1.62 3.24 4.86 6.48 8.1 9.72 11.34 12.96 14.58 16.2

Estilo Fineline 8.1 16.2 24.3 32.4 40.5 48.6 56.7 64.8 72.9 81

LAMINATE

Olsen 1.98 3.96 5.94 7.92 9.9 11.88 13.86 15.84 17.82 19.8

168 All prices include VATPACK CALCULATOR


Terms & ConditionsIn the unlikely event that goods are delivered wrong or damaged, it is the responsibility of the customer to ensure su�cient time is allowed for a replacement to be sent.1. DEFINITIONS

In these terms and conditions, the following words shall have the following meanings:“Buyer” shall mean any person, firm or company, to whom the Company supplies Goods or Services or with whom the Company enters into negotiations for the supply of Goods or Services.“Company” shall mean Woodpecker Trading Company trading as Kenton Floors.“Goods” shall mean products, articles or things which are supplied by or which are the subject of negotiations for supply by the Company to the Buyer.“Services” shall mean services are supplied by or which are the subject of negotiations/or supply by the Company to the Buyer.2. MAKING THE CONTRACT

2.1 The Company’s salesmen are not authorised representatives and are not authorised to accept confirm or vary any order nor to make any representation or promise on the Company’s behalf2.2 Any estimate/quotation which comprises an invitation to treat is open for a period of 30 days only from the date thereof, provided that the Company has not previously withdrawn it. Any order issued by the Buyer is subject to acceptance by the Company and a contract will only be formed when the Company has accepted the Buyer’s o�er to buy in writing. Any o�er made by the Buyer must be confirmed in writing by the Buyer.2.3 All orders are placed under these terms and conditions alone.2.4 These terms and conditions exclude any other terms and conditions inconsistent therewith which a Buyer might seek to impose even though such other terms and conditions may be submitted in a later document and/or purport to exclude or supersede any terms or conditions with them or may be contained in any o�er acceptance or counter-o�er made by the Buyer.2.5 All floors supplied by the Company must be fitted in accordance with BS8201 (1987).2.6 No variation of these terms and conditions is permitted unless expressly accepted by a Director of the firm in writing.3. CANCELLATION

3.1 No cancellation by the Buyer is permitted except where expressly agreed by a Director of the Company in writing.3.2 The Buyer will in the event of agreed cancellation by the Buyer indemnify the Company fully against all expenses incurred up to the time of such cancellation together with by way of liquidated damages a sum of 33 1/3% of the contract price which shall be paid by the Buyer to the Company forthwith,4. PRICE

4.1 All prices quoted are those ruling at the date of dispatch or supply.4.2 Unless otherwise stated all prices quoted are net, exclusive of VAT, and in the case of Goods ex works.4.3 The Company reserves the right at any time prior to delivery of the Goods or supply of Services to adjust the price to take account of any increase in the cost of raw materials, labour or services or any currency fluctuations a�ecting the cost of imported materials or services.5. TERMS OF PAYMENT

5.1 All sums become due and payable under these terms and conditions not later than 20th of the month following date of invoice.5.2 Time for payment shall be of the essence.5.3 The Company reserves the right to charge interest at 2.5 per centum per month on all overdue accounts, such interest being deemed to accrue on a day to day basis from the due date for payment under clause 5.1.5.4 If the Buyer (being a Company) has a petition for its winding-up or passes a resolution for voluntary winding-up otherwise than for the purpose of a bona fide amalgamation or reconstruction or compounds with its creditors or has a receiver appointed or all or any part of its assets or (being an individual) becomes bankrupt or insolvent or enters into any arrangement with its creditors or commits a material or serious breach of this Agreement (and in the case of such a breach being remediable fails to remedy it within 7 days of receiving notice to do so) he will be deemed to have repudiated the Contract.5.5 The Company reserves the right at any time at its discretion to demand security for payment before continuing with or delivering any Order, supplying any Goods or Services.5.6 The Buyer accepts that in the event of non payment within the payment period the Company will resort to legal action to recover the debt in this instance a 20% surcharge will be added to the outstanding amount to cover administration and agents fees.5.7 Where the Buyer is a company the directors agree to guarantee payment personally, both jointly and severally, of any outstanding amounts due in the event of their company being unable to meet its financial commitments or becoming insolvent. 6. DELIVERY

6.1 Delivery will be deemed to have been e�ected when the Goods are ready for collection at the premises of the Company or as the case may be the premises of the suppliers to the Company in circumstances where the Goods are delivered direct from such suppliers.6.2 Time of delivery is not of the essence.6.3 The Company shall not be liable for any loss whatsoever or howsoever arising caused by its non-delivery or by the failure to make Goods ready for collection on the due date.

6.4 The Company reserves the right to make delivery by installments and to tender a separate invoice in respect of each installment.6.5 When delivery is to be by installments or the Company exercises its right to deliver by installments under clause 6.4 hereof or if there be delay in the delivery of any one or more installments for whatever reason this will not entitle the Buyer to treat the contract as repudiated and/or to damages.6.6 Deviations in quantity between the Goods delivered and Goods ordered representing not more than 10 per cent by value shall not give the Buyer any right to reject the Goods or to claim damages and the Buyer shall be obliged to accept and pay at the contract rate for the quantity of the Goods delivered.7. SUPPLY OF SERVICES

7.1 Time for the supply of Services is not of the essence.7.2 The Company shall not be liable for any loss whatsoever or howsoever arising caused by its failure to supply Services or any part thereof on the due date.7.3 The Company reserves the right to supply Services by installments and to tender a separate invoice in respect of each installment.7.4 When the supply of Services is to be by installments or the firm exercises its right to supply Services by installments under clause 7.3 hereof or if there be a delay in the supply of any one or more installments of Services for whatever reason this will not entitle the Buyer to treat the contract as repudiated or to damages.7.5 Deviation in the quantity between Services supplied and the Services ordered representing not more than 10 per cent by value shall not give the Buyer any right to reject the Services or to claim damages and the Buyer shall be obliged to accept and pay at the contract rate for the quantity of the Services supplied.8. RISK AND THE PASSING OF PROPERTY IN GOODS

8.1 Risk in the Goods shall pass to the Buyer when the Goods are delivered.8.2 Notwithstanding risk in the Goods passing in accordance with clause 8.1 hereof title in the Goods shall not pass to the Buyer until whichever shall be the first to occur of the following:-8.2.1 payment being received by the Company for the Goods and Services and no other amounts then being outstanding from the Buyer to the Company in respect of other Goods or Services supplied by the Company8.2.2 the Buyer selling the Goods in accordance with the provisions of these terms and conditions in which case title to the Goods shall be deemed to have passed to the Buyer immediately prior to delivery of the Goods to the Buyer’s customers; and8.2.3 the Company waiving its rights under this clause 8.2 in respect of specified Goods or Services whereupon title to the said Goods shall forthwith vest in the Buyer.8.3 The Buyer is licensed by the Company to use or to agree to sell the Goods delivered to the Buyer subject to the express condition that the entire proceeds of any sale are held in trust for the Company and are not mixed with other moneys or paid into an overdrawn bank account and shall at all times be identifiable as the Company’s moneys. 8.4 Until title to the Goods passes:8.4.1 The Buyer will hold the Goods as fiduciary agent and bailee for the Company;8.4.2 the Goods shall, subject to clause 8.3, be kept separate and distinct from all other property of the Buyer and of third parties and in good and substantial repair and condition and be stored in such a way as to be clearly identifiable as belonging to the Company;8.4.3 the Company may at any time revoke the power of sale and use contained in clause 8.3 by notice to the Buyer if the Buyer is in default beyond the 20th of the month following invoice in the payment of any sum whatsoever due to the Company (whether in respect of the Goods or any other Goods or Services supplied at any time by it to the Buyer) or if the Company has bona fide doubts as to the solvency of the Buyer;8.4.4 The Buyer’s power of sale and use contained in clause 8.3 shall automatically cease if the Buyer has a petition presented for its winding-up or passes a resolution for voluntary winding-up otherwise than for the purpose of a bona fide amalgamation or reconstruction or compounds with its creditors or has a receiver appointed of all or any part of its assets or becomes bankrupts or insolvent or enters into any arrangements with creditors or takes or su�ers any similar action in consequence of debts or carries out or undergoes any analogues act or proceeding under foreign law;8.4.5 upon determination of the Buyer’s power of sale and use pursuant to clause 8.4.3 or clause 8.4.4. the Buyer shall place any of the Goods in its possession or under its control and unsold at the disposal of the Company and the Company shall be entitled to enter upon any premises of the Buyer for the purpose of removing such Goods.8.5 The Company shall at any time be entitled to appropriate any payments made by the Buyer in respect of any Goods or Services in settlement of such invoices or accounts in respect of such Goods or Services as the Company may in its absolute discretion think fit notwithstanding any purported appropriation to the contrary by the Buyer.9. LIEN AND STOPPAGE

9.1 Until such time as the title in the Goods has passed to the Buyer the Company has the right to withhold delivery if the Buyer (being a Company) has a petition presented for its winding-up or passes a resolution for voluntary winding-up otherwise than for the purpose of a bona fide amalgamation or reconstruction or compounds with its creditors or has a receiver appointed of all or any part of its assets or (being an individual) becomes bankrupt or insolvent or enters into any arrangements with creditors or takes or su�ers any similar action in consequence of debts or carries out or undergoes any analogous act or proceedings under foreign law.

9.2 When the title in the Goods has passed to the Buyer and the time for payment has fallen due but payment has not been made or if the Buyer (being a Company) has a petition presented for its winding-up or passes a resolution for voluntary winding-up otherwise than for the purposes of a bona fide amalgamation or reconstruction or compounds with its creditors or has a receiver appointed of all or any part of its assets or (being an individual) becomes bankrupt or insolvent or enters into any arrangements with creditors or takes or su�ers any similar action in consequence of debts or carries out or undergoes any analogous act or proceedings under foreign law the Company has 9.2.1 a lien on the Goods so long as the Company is in possession of them9.2.2 a right of stoppage in transit9.2.3 a right of resale9.3 For the avoidance of doubt it is hereby declared that nothing in this clause shall a�ect the rights given to the Company by ss.38-48 of the Sale of Goods Act 1979.10. INSPECTION/SHORTAGES

10.1 The Buyer is under a duty to inspect the Goods forthwith on delivery and satisfy himself as to the due performance of Services forthwith after supply.10.2 The Company shall be under no liability for any defects or shortages that would be apparent on careful inspection if the terms of this clause are not complied with, and, in any event will be under no liability if a written complaint is not delivered to the Company within 7 days of delivery or supply detailing the alleged detect or shortage.10.3 In all cases where defects or shortages in respect of Goods are complained of the Company shall be under no liability in respect thereof unless an opportunity to inspect the Goods is given to the Company before any use is made thereof or any alteration or modification is made thereto by the Buyer.10.4 Subject to clauses 10.2 and 10.3 the Company shall make good any defect or shortage in the Goods and where appropriate replace any Goods damaged in transit as soon as it is reasonably able to do so, but otherwise shall be under no liability whatsoever or howsoever arising from such defect, shortage or damage.10.5 Subject to clause 10.4 the Company shall remedy any defect in the supply of Services as soon as it is reasonably able to do so but otherwise shall be under no liability whatsoever or howsoever arising from such defect11. WARRANTY

11.1 The Buyer shall satisfy himself of the suitability of the Goods or Services for any particular use or purpose and shall be totally responsible 11.2 If the Goods are in such a state or the Services so defectively supplied as would but for this condition entitle the Buyer to repudiate the contract and/or claim damages from the Company the Company reserves the right to repair or replace the Good or perform the Service (or relevant part thereof) again.12. LIABILITY

12.1 Introduction12.1.1 Nothing in clause 12 shall be deemed to exclude or restrict the Company’s liability for death or personal injury resulting from negligence.12.1.2 Each of the sub-clauses in clause 12 is to be treated as separate and independent12.1.3 The Company is willing to undertake liability additional to that provided by this clause in exchange for a higher price12.2 Exclusion12.2.1 Clause 12.2 only covers defects caused by faulty design, manufacture, materials or workmanship. It does not cover defects caused by abnormal use, misuse or neglect.12.2.2 The Company agrees that if any defect covered by clause 12.2 is discovered during the warranty period commencing with the date of delivery or supply, the Company will remedy any defect at its own expense or, in the case of Goods if it chooses to do so, replace them.12.2.3 The Buyer cannot claim the benefit of this clause unless- he informs the Company of the relevant defect in writing within 7 working days of discovering it.12.2.3a The company will not accept any liability for defects in goods once they have been fitted. It is the buyers responsibility to check the goods prior to installation.12.2.4 The risk of accidental loss whilst the Goods are being returned will be borne by the Buyer12.2.5 In consideration for receiving the benefit of this clause, the Buyer agrees that, apart from those terms set out in clause 10 and 11, all other terms, whether conditions, warranties or innominate terms, express or implied, statutory or otherwise, are excluded from the contract between the Company and the Buyer to the extent permitted by law (except where the Buyer deals as consumer within section 12 of the Unfair Contract Terms Act 1977 when the terms implied by sections 13, 14 and 15 of the Sale of Goods Act 1979 shall be implied into the contract).12.3 Exclusion of Consequential Loss.The Company shall not be liable for any consequential or indirect loss su�ered by the Buyer whether this loss arises from breach of a duty in contract or tort or in any other way (including loss arising from the Company’s negligence). Non-exhaustive illustrations of consequential or indirect loss would be – loss of profits-loss of contracts-damage to property of the Buyer or anyone else, and-personal injury to the Buyer or anyone else (except so far as such injury is attributable to the Company’s negligence)

12.4 LimitationThe Company’s total liability for any one claim or for the total of all claims arising from any one act or default of the Company (whether arising from the Company’s negligence or otherwise) shall not exceed £1000 Or the contract price whichever is the greater.13. FORCE MAJEURE

13.1 The Company shall not be liable for any failure to deliver the Goods or perform the Services arising from circumstances outside the Company’s control.13.2 Non-exhaustive illustrations of such circumstances would be act of God, war, riot, explosion, abnormal weather conditions, fire, flood, strikes, lockouts, Government action or regulations (UK or otherwise), delay by suppliers, accidents and shortage of materials, labour or manufacturing facilities.13.3 Should the Company be prevented from delivering the Goods or performing the Services in the above circumstances, it shall give the Buyer written notice of this fact as soon as reasonably practicable after discovering it.13.4 If the circumstances preventing delivery of the Goods or performing the Services are still continuing three months after the Buyer receives the Company’s notice, then either party may give written notice to the other cancelling the contract.13.5 If the contract is cancelled in this way, the Company will refund any payment which the Buyer has already made on account of the price (subject to deduction of any amount the Company is entitled to claim from the Buyer) but the Company will not be liable to compensate the Buyer for any further loss or damage caused by the failure to deliver the Goods or perform the Services.14. SALES PROMOTION DOCUMENTATION

Whilst the Company takes every precaution in the preparation of its catalogue, technical circulars, price lists and its other literature, these documents are for the Buyer’s general guidance only and the particulars contained therein shall not constitute representations by the Company and the Company shall not be bound thereby.15. NOTICES

Any notice to be given hereunder shall be in writing and shall be deemed to have been duly given if sent or delivered to the party concerned at its address specified overleaf or such other address as that party may from time to time notify in writing and shall be deemed to have been served, if sent by post, 48 hours after posting.16. CANCELLATION

The Company is prepared to accept the cancellation of a contract provided that it is in writing and is received by the Company: (a) in the case of special orders before the manufacture of the goods has commenced:(b) in the case of goods ordered from stock before the goods have been despatched.(c) but subject to liability for any losses incurred by the Company in disposing of the goods.17. MATCHING

For technical reasons it is not always possible to obtain an exact colour match between di�erent production batches which have the same colour description. The Company therefore recommends that all products should be of the same batch. The Company will be under no liability whatsoever in respect of any mismatching of tiles and sheet with the same colour description where the tiles and sheet are of di�erent batches.18. ADVICE AND WARNINGS

(a) Without prejudice to any of the Company’s rights under these terms or common law or statute the Company shall not be liable for any loss or damage su�ered by the Buyer or any third party as a result of failure to follow any of the Company’s recommendations with regard to the goods.19. STILETTO HEELS

Where Stiletto heeled shoes are in use, floors are liable to su�er damage from intense point loading pressure. We therefore cannot be held responsible for any loss in appearance where such heels are in use.20. SUITABILITY OF GOODS

If requested in writing to do so, we will use our utmost endeavours to give sound and honest advice as to the suitability of goods sold by us for a particular use or purpose, but we do not represent or warrant (and nobody has authority to represent or warrant) the fitness of any goods for any particular purpose or use, whether such use or purpose is known to us or not or any advice requested regarding installation. 21. ASSIGNMENT

The Buyer shall not assign or purport to assign or transfer the contract or the benefits thereof to any other person without prior written consent of the other.22. PROPER LAW AND JURISDICTION

The Contract shall be governed by and construed in accordance with English law and all disputes arising in connection with the contract shall be submitted to the jurisdiction of the English Courts. 23. HEADINGS

The headings of these conditions are for convenience only and shall have no e�ect on the interpretation thereof.

Revision Date: February 2013Kenton Floors, Caerphilly CF83 8DRTel: 02920 888223

Kenton Floors reserves the right to update and amend these terms and conditions without notice.

All prices include VAT 169TERMS & CONDITIONS

AGD_IBC_13.indd 1 19/11/2013 12:47

Your Woodpecker Stockist

Kenton Floors Woodpecker House

29 Pant Glas Industrial Estate Bedwas, Caerphilly CF83 8DR

T: 02920 888223 F: 02920 881694 E: [email protected]

www.woodpeckerflooring.co.uk

Scan the QR code on your mobile device to get straight to our website

AGD_OBC_13.indd 1 21/11/2013 16:00

Woodpecker complete

Documents

Transcript of Woodpecker complete