www.richelieu.com

Wood Veneer doors

Wood Veneer doors

All models are available in each of our wide selection of veneers. By default, the wood grain appears vertically on doors and drawer fronts. Please specify if you want the wood grain to be set horizontally. For some models, you must indicate the grain orientation. Otherwise, it will automatically be vertical (top to bottom). Please refer to our technical drawing (page 5). Our products have excellent stability, with a warping tolerance of 1/16”. This tolerance applies only to door sizes not exceeding 24” wide and 48” high.

We consider our sanding preparation ready for finishing. However, we still recommend a light hand sanding of all parts in order to meet your level of perfection.

30004 edges

31804 edges

31954 edges

31504 edges

31902 edges

2000 2 verticaledges

31254 edges

3125-2r4 edges

Models

2

3/4”

RADIUS 1/16”

Solid wood edge2.0 mm

3/4”

RADIUS 1/16”

Solid wood Edge 2.0 mm

11/16”

SQUARE

Wood edge 0.5 mm

7/8”

3/16”

11° ANGLE

Solid wood edge 2.0 mm

11/16”

7/8”

3/16”

RADIUS 3.5”

Solid wood edge 2.0 mm

11/16”

3/4” 5/8”

RADIUS 5/8”

Solid wood edge 2.0 mm

3/4”

RADIUS 1/8”

Solid wood edge 2.0 mm

3/4” Solid wood edge 2.0 mm

Square

neW

Door with vertical edge banding

Wood Veneer doors

Frame door Our frame door is available in all models, regardless of the veneer species.

special Panels Our specialty panels, manufactured in the size of your choice, have one or more square edges (not machined), edgebanded or not. They are suitable as doors on a corner module (Lazy Susan), as end panels, fillers, etc. When ordering, please indicate which edges should be square and whether they should be edgebanded or not. Veneer sheets, edge banding, and different types of panels are also available. Please see our price list.

oven Panels Our oven panels have one or more openings. You must specify all measurements prior to fabrication.

Square edge (without machining) edgebanded or not, on 1, 2 or 3 sides

3/8”

Profile depends on the model

Standard

Glass thickness 3 or 4 mm

Back

Front

Solid wood edge

2-1/2”

1/2”

B1

B1

B2

B2

B3

A1 A2

H

H

A1 A2

C

L

CoMPleMentary ProduCts

3

On special order, edge banding can also be applied to the inner contour of a panel for an oven and / or microwave. It is subject to a surcharge.

Please note that nature creates, but cannot reproduce. To avoid variations of shades and colors between your doors and panels, we recommend that you order all your components at the same time. They will then be matched to each other.

Microwave ovenfront panel

standard oven and microwave

oven front panel

light shields Light shields are available in lengths of 96”x 3”. They are shaped on one edge only and are available in all our door models.

Wood Veneer doors

available veneers

4

anigre Figured

rosewood Fc

caramel Bamboo Qc

Zebrawood Qc

Natural Bamboo Qc

teak Qc

sapele ribbon Qc

real Wood veneers - exotiC sPeCies

Key cuts

FC: Flat Cut

QC: Quarter Cut

RC: Rotary Cut

RF: Rift Cut

Mahogany Qc

Walnut Qc

cherry Qc

teak Qc

White Oak rF

Wenge Qc

Macassar ebony Qc

Zebrawood Qc

Maple Qc Birdseye Maple Fc

engineered Wood veneers

Wood Veneer doors

cherry Qc

Maple Qc

Birch rc

cherry Fc

Maple rc Maple Fc

White Oak Qc

ash Fc

red Oak Qc

Walnut Qc

red Oak Fc

Walnut Fc

real Wood veneers - CoMMon sPeCies

tyPes oF sequenCing The manufacturing of our doors can be done in two ways, either sequenced or not. Our doors and drawer fronts have a standard vertical grain. If you need products with horizontal grain, please indicate so when ordering.

non-sequenced method The production of doors is done randomly. That is, they will be fabricated at random and each one will display its own characteristics (graining, shades, etc.). This method is the standard method of production in the industry.

sequenced method The production of doors takes into account the exact position of each door relative to the next; each door becomes a visual extension of adjacent doors. This method results in a harmonious look for the entire work (send your drawing of the requested sequence). A surcharge for this method applies. Note that this method does not apply to our HD Evolution collection.

5

Each type of wood has its own characteristics. Some react poorly to dyes, others show significant color changes with age or have a wide range of grain or color, all of which require a good knowledge of the species in order to extract its maximum effect. We recommend that you make your own tests on your chosen materials.

Wood Veneer doors

general inForMation

REGULAR ORDERS

• The maximum lead time for production (ex works) of a regular order is 10 working days. The calculation of working days begins on the next business day after receipt of the order at the factory. If, for reasons that are beyond our control, the period of production should exceed 10 working days, we will notify the customer immediately.

SPECIAL ORDERS: ADDITION (1 to 5 units)

• Orders of 5 supplemental units or less can be added to the initial order, 5 working days before delivery. • All other supplemental orders will be processed within normal production lead time. For faster delivery, a surcharge will be applied based on the number of units and required lead time.

SPECIAL ORDERS: REmAkE

• Remake orders will be processed normally.

NOTE: For rush orders, please note that production depends on the availability of materials (veneer sheets and edgebanding) so that we may meet the production deadlines.

liMited Warranty

Richelieu guarantees its doors for a period of 5 years from the date of shipment against manufacturing defects when they are used under normal conditions.

Our limited warranty will apply only if our products have been used or stored in a temperature-controlled environment. Under such conditions, our products will provide maximum performance and complete satisfaction. Our warranty will not apply if our products are used in an environment where the humidity is above 50%.

Our guarantee is limited to the replacement of original materials provided by us, and does not cover the costs of labour and finishing.

• Natural wood discoloration caused by any factor does not in itself constitute a defect. • Fading over time caused by UV rays on a varnish does not in itself constitute a defect. • The characteristics of wood, such as mineral node, knot, sugar traces, modular radius and other characteristics do not intrinsically constitute defects. The veneers used meet the grade for an entire face veneer 49 inches by 97 inches, which complies with North-American gradations of wood veneers. • We are not responsible for the quality of finish of our products resulting from your finishing products. We recommend that you make a preliminary

finishing test on a component before applying the product on all of our components. • Warping problems must be detected and reported within 15 days of receipt of the order. Moreover, the defective door(s) cannot have been altered

in any way whatsoever (drilling for the hinges, installation of handles, finishing, etc.). • Defective doors must be returned to your Richelieu distributor. • We do not guarantee any doors wider than 24 inches or higher than 48 inches against warping. The normal tolerance for these sizes is 1/16” or 0.02 mm.

DOORS DAMAGED IN TRANSIT

• When receiving your shipment, always check that they have not been damaged in transit before signing the delivery note. If the boxes are damaged, please write “damaged boxes” on the waybill. You must keep the defective boxes and doors to allow us to place our claim with the carrier. Notify us immediately of the problem so that the faulty doors may be repaired and returned to you as quickly as possible. • It is your responsibility to check your merchandise upon receipt, because if the doors were damaged in transit and you sign the waybill indicating

“received in good condition”, it will be impossible to prove that the damage occurred during transit, thus preventing us from making any claim with the carrier.

MISSING BOXES

• When receiving boxes, verify that the number of boxes delivered matches the number on the delivery note. If boxes are missing, please write “missing boxes” before signing it, indicating the number of missing boxes. Notify us immediately of the problem so that a search can be done to locate the missing package(s).

6

Visit us online at www.richelieu.com and try our fast and easy step-by-step module within our cabinet doors section, that lets you create your own custom doors according to your specifications!

Only a few clicks are required to view and order your own designs. We have infinite possibilities!

CUSTOM-BUILT DOORS WEB MODULE www.richelieu.com

CANADA UNITED STATES

QUÉBECDrummondvilleLavalLongueuilMontréalQuébec

SASKATCHEWANReginaSaskatoon

NEWFOUNDLANDSt. John’s

NOVA SCOTIAHalifax

ONTARIOBarrieKitchener Mississauga Ottawa SudburyThunder BayToronto

CONNECTICUTHartford

FLORIDA Dania Beach Hialeah Pompano Beach Riviera Beach

GEORGIA Atlanta

ILLINOIS Chicago

INDIANA Indianapolis

KENTUCKYLouisville

OHIOCincinnatiCleveland Columbus

SOUTH CAROLINAGreenville

TENNESSEENashville

WASHINGTONSeattle

Tel.: 1 866 979-5999Fax: 1 866 421-8477

Tel.: 1 877 556-5150Fax: 1 877 556-5151

WV

DO

OR

EN

2n

d e

dit

ion

11-

2012

P

rin

ted

in C

anad

a $1

ALBERTACalgaryEdmonton

BRITISH COLUMBIAKelownaVancouverVictoria

MANITOBAWinnipeg

NEW BRUNSWICKMoncton

MASSACHUSETTS Boston

MICHIGAN Detroit

NEW JERSEY Avenel Lincoln Park

NEW YORK New York Syracuse

NORTH CAROLINA Charlotte Greensboro Raleigh