"GL&Dsrl unipersonale"

Via Ceresone, 9 35035 Mestrino(PD) ITALY C.F. GBBLCU61A01F161 C/P.IVA 04724030285

TEL/FAX 0499003475 e-mail:gledsrl@gmail.com

WOOD-CHIPPERS

Models: HERCULES,GALAXI, OMEGA M4

PRODUCTS CATALOGUE

Sede legale: Via Ceresone, 9 35035 Mestrino( PD) Italy

Tel/Fax 049 9003475 E-mail gledsrl@gmail.com Cod. fisc. e Partita IVA 04724030285

MODELS WOOD-CHIPPERS HÉRCULES:

- HÉRCULES 125UNIVERSAL

- HÉRCULES C150SE

- HÉRCULES CT150SE

- HÉRCULES M160SE

- HÉRCULES MT160SE

WOODCHIPPER HÉRCULES C125 UNIVERSAL

1 FEED ROLLER

CHIPPING TOOLS DISCS

Multifunctional Disc PATENT VR2013A000103

Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.

Multifunctional Disc

Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.

Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width

Woodchipper - Ø max to chip 120 cm - Plugged through P.t.o shaft

- Hèrcules C125 universal is designed to work with dry and green woods for satisfy also the extreme demands of operators.

- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.

- La Hèrcules C125 universal has a force-feeding of product and it is guarantee by a toothed roll with controlled hydraulic controllo idraulico and with instant reverse.

- this version works on 3-point hitch universal of 1° and 2 ° Cat.

- the control of the effort is manual The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.

- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.

- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.

TECHNICAL DETAILS

mm

Ø 590 X 28

mm ( A X B )

220x150

Power needed (CV)

da 25 a 70

Quantity knives

2

di produz. Dell’azienda

KG

460

Production (m³/h)

Min 10 Max 16

Ø(mm) MAX

to chip

125

Dimensions

(mm)

A - B - C 126 - 135 -165

WOODCHIPPER HÉRCULES C150SE

1 FEED ROLLER

CHIPPING TOOLS DISCS

Multifunctional Disc PATENT VR2013A000103

Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.

Multifunctional Disc

Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.

Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width

Woodchipper - Ø max to chip 150 cm - Plugged through P.t.o shaft

- Hèrcules C150SE is designed to work with dry and green woods for satisfy also the extreme demands of operators.

- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.

- La Hèrcules C150SE has a force-feeding of product and it is guarantee by a toothed roll with controlled hydraulic controllo idraulico and with instant reverse.

- this version works on 3-point hitch universal of 1° and 2 ° Cat.

- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.

- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.

- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.

TECHNICAL DETAILS

mm

Ø 590 X 28

mm ( A X B )

220x150

Power needed (CV)

da 25 a 70

Quantity knives

2

di produz. Dell’azienda

KG

500

Production (m³/h)

Min 10 Max 16

Ø(mm) MAX

to chip

150

Dimensions

(mm)

A - B - C 126 - 135 -165

WOODCHIPPER HÉRCULES M160SE

1 FEED ROLLER

CHIPPING TOOLS DISCS

Multifunctional Disc PATENT VR2013A000103

Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.

Multifunctional Disc

Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.

Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width

Woodchipper - Ø max to chip 160 cm - Plugged through P.t.o shaft

- Hèrcules M160SE is designed to work with dry and green woods for satisfy also the extreme demands of operators.

- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.

- Hèrcules M160SE has a force-feeding of product and it is guarantee by a toothed roll with controlled hydraulic controllo idraulico and with instant reverse.

- this version works on 3-point hitch universal of 1° and 2 ° Cat. it has a side frame for to have the side loading, and it is complete with connection for towing trailer agriculture.

- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.

- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.

- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.

TECHNICAL DETAILS

mm

Ø 610 X 30

mm ( A X B )

220x160

Power needed (CV)

da 35 a 110

Quantity knives

2

di produz. Dell’azienda

KG

527

Production (m³/h)

Min 12 Max 25

Ø(mm) MAX

to chip

160

Dimensions

(mm)

A - B - C 126 - 139 -170

WOODCHIPPER HÉRCULES MT160SE

1 FEED ROLLER

CHIPPING TOOLS DISCS

Multifunctional Disc PATENT VR2013A000103

Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.

Multifunctional Disc

Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.

Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width

Woodchipper - Ø max to chip 160 cm - Plugged through P.t.o shaft

- Hèrcules MT160SE is designed to work with dry and green woods for satisfy also the extreme demands of operators.

- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.

- La Hèrcules MT160SE has a force-feeding of product and it is guarantee by a toothed roll with controlled hydraulic controllo idraulico and with instant reverse.

- this version is of the type towed with trolley “Certificate for road traffic” and it is towed by agricultural tractor. it has a side frame for to have the side loading, and it is complete with connection for towing trailer agriculture.

- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power. The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.

- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.

- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.

TECHNICAL DETAILS

mm

Ø 590 X 28

mm ( A X B )

220x160

Power needed (CV)

da 35 a 110

Quantity knives

2

di produz. Dell’azienda

KG

560

Production (m³/h)

Min 12 Max 25

Ø(mm) MAX

to chip

160

Dimensions

(mm)

A - B - C 148 - 258 -170

MODELS WOOD-CHIPPERS GALAXI:

- GALAXI C155DT

- GALAXI CT155DT

- GALAXI CTP155DT

- GALAXI M165DT

- GALAXI MT165DT

- GALAXI M225DT

- GALAXI MT225DT

- GALAXI MOTOR CDM150DT (MOTOR)

- GALAXI MOTOR CDB150DT (MOTOR)

WOODCHIPPER GALAXI C155DT

2 FEED ROLLER

CHIPPING TOOLS DISCS

Multifunctional Disc PATENT VR2013A000103

Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.

Multifunctional Disc

Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.

Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width

Woodchipper - Ø max to chip 155 cm - Plugged through P.t.o shaft

- Galaxi C155DT is designed to work with dry and green woods for satisfy also the extreme demands of operators.

- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.

- Galaxi C155DT has a force-feeding of product guarantee by 2 rolls with hydraulic action.

- this version works on 3-point hitch universal of 1° and 2 ° Cat.

- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.

- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.

- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.

TECHNICAL DETAILS

mm

Ø 610 X 30

mm ( A X B )

220x160

Power needed (CV)

da 25 a 85

Quantity knives

2

di produz. Dell’azienda

KG

545

Production (m³/h)

Min 8 Max 21

Ø(mm) MAX

to chip

155

Dimensions

(mm)

A - B - C 126 - 140 -165

WOODCHIPPER GALAXI C155DT

2 FEED ROLLER

CHIPPING TOOLS DISCS

Multifunctional Disc PATENT VR2013A000103

Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.

Multifunctional Disc

Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.

Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width

Woodchipper - Ø max to chip 155 cm - Plugged through P.t.o shaft

- Galaxi C155DT is designed to work with dry and green woods for satisfy also the extreme demands of operators.

- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.

- Galaxi C155DT has a force-feeding of product guarantee by 2 rolls with hydraulic action.

- this version is of the type towed with trolley “Certificate for road traffic” and it is towed by agricultural tractor.

- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.

- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.

- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.

TECHNICAL DETAILS

mm

Ø 610 X 30

mm ( A X B )

220x160

Power needed (CV)

da 25 a 85

Quantity knives

2

di produz. Dell’azienda

KG

545

Production (m³/h)

Min 8 Max 21

Ø(mm) MAX

to chip

155

Dimensions

(mm)

A - B - C 148 - 255 -171

WOODCHIPPER GALAXI CTP155DT

2 FEED ROLLER

CHIPPING TOOLS DISCS

Multifunctional Disc PATENT VR2013A000103

Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.

Multifunctional Disc

Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.

Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width

Woodchipper - Ø max to chip 155 cm - Plugged through P.t.o shaft

- Galaxi C155DT is designed to work with dry and green woods for satisfy also the extreme demands of operators.

- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.

- Galaxi C155DT has a force-feeding of product guarantee by 2 rolls with hydraulic action.

- this version of the type half-brought on the universal three-point of 1 ° and 2 ° Cat. With pneumatic wheels of support, for to facilitate small agricultural tractors.

- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.

- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.

- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.

TECHNICAL DETAILS

mm

Ø 610 X 30

mm ( A X B )

220x160

Power needed (CV)

da 25 a 85

Quantity knives

2

di produz. Dell’azienda

KG

545

Production (m³/h)

Min 8 Max 21

Ø(mm) MAX

to chip

125

Dimensions

(mm)

A - B - C 148 - 255 -171

WOODCHIPPER GALAXI M165DT

2 FEED ROLLER

CHIPPING TOOLS DISCS

Multifunctional Disc PATENT VR2013A000103

Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.

Multifunctional Disc

Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.

Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width

Woodchipper - Ø max to chip 165 cm - Plugged through P.t.o shaft

- Galaxi M165DT is designed to work with dry and green woods for satisfy also the extreme demands of operators.

- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.

- Galaxi M165DT has a force-feeding of product guarantee by 2 rolls with hydraulic action.

- this version works on 3-point hitch universal of 1° and 2 ° Cat. it has a side frame for to have the side loading, and it is complete with connection for towing trailer agriculture.

- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.

- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.

- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.

TECHNICAL DETAILS

mm

Ø 610 X 30

mm

230x170

Power needed (CV)

da 35 a 110

Quantity knives

2

di produz. Dell’azienda

KG

535

Production (m³/h)

Min 12 Max 25

Ø(mm) MAX

to chip

165

Dimensions

(mm)

A - B - C 126 - 149 -165

WOODCHIPPER GALAXI MT165DT

2 FEED ROLLER

CHIPPING TOOLS DISCS

Multifunctional Disc PATENT VR2013A000103

Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.

Multifunctional Disc

Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.

Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width

Woodchipper - Ø max to chip 165 cm - Plugged through P.t.o shaft

- Galaxi MT165DT is designed to work with dry and green woods for satisfy also the extreme demands of operators.

- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.

- Galaxi MT165DT has a force-feeding of product guarantee by 2 rolls with hydraulic action.

- this version is of the type towed with trolley “Certificate for road traffic” and it is towed by agricultural tractor. it has a side frame for to have the side loading, and it is complete with connection for towing trailer agriculture.

- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.

- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.

- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.

TECHNICAL DETAILS

mm

Ø 610 X 30

mm ( A X B )

230x170

Power needed (CV)

da 35 a 110

Quantity knives

2

di produz. Dell’azienda

KG

580

Production (m³/h)

Min 12 Max 25

Ø(mm) MAX

to chip

160

Dimensions

(mm)

A - B - C 146– 260-165

WOODCHIPPER GALAXI M225DT

2 FEED ROLLER

CHIPPING TOOLS DISCS

Multifunctional Disc PATENT VR2013A000103

Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.

Multifunctional Disc

Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.

Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width

Woodchipper - Ø max to chip 225 cm - Plugged through P.t.o shaft

- Galaxi M225DT is designed to work with dry and green woods for satisfy also the extreme demands of operators.

- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.

- Galaxi M225DT has a force-feeding of product guarantee by 2 rolls with hydraulic action.

- this version works on 3-point hitch universal of 1° and 2 ° Cat. it has a side frame for to have the side loading, and it is complete with connection for towing trailer agriculture.

- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.

- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.

- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.

TECHNICAL DETAILS

mm

Ø 820 X 40

mm ( A X B )

290x250

Power needed (CV)

da 75 a 110

Quantity knives

2

di produz. Dell’azienda

KG

890

Production (m³/h)

Min 12 Max 38

Ø(mm) MAX

to chip

225

Dimensions

(mm)

A - B - C 245 – 149 -288

WOODCHIPPER GALAXI CDM150DT

2 FEED ROLLERS

CHIPPING TOOLS DISCS

Multifunctional Disc PATENT VR2013A000103

Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.

Multifunctional Disc

Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.

Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width

Woodchipper - Ø max to chip 155 cm - Plugged through P.t.o shaft

- Galaxi CDM150DT is designed to work with dry and green woods for satisfy also the extreme demands of operators. The machine has a DIESEL engine LOMBARDINI fox 4 cylinder.

- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.

- Galaxi CDM150DT has a force-feeding of product guarantee by 2 rolls with hydraulic action.

- this version is of the type towed with trolley “Certificate for road traffic” and it is towed by agricultural tractor.

- The hydraulic system is with temperature controlled.

- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.

- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.

- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.

TECHNICAL DETAILS

mm

Ø 590 X 28

mm

220x150

Power 38 CV 4 Cyl FOX

Liquid Cooler

Quantity knives

2

di produz. Dell’azienda

KG

460

Production (m³/h)

Min 10 Max 16

Ø(mm) MAX

to chip

125

Dimensions

(mm)

A - B - C 126 - 135 -165

WOODCHIPPER GALAXI CDB150DT

2 FEED ROLLERS

CHIPPING TOOLS DISCS

Multifunctional Disc PATENT VR2013A000103

Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.

Multifunctional Disc

Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.

Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width

Woodchipper - Ø max to chip 155 cm - Plugged through P.t.o shaft

- Galaxi CDB150DT is designed to work with dry and green woods for satisfy also the extreme demands of operators. The machine has a PETROL engine KOOLER.

- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.

- Galaxi CDB150DT has a force-feeding of product guarantee by 2 rolls with hydraulic action.

- this version is of the type towed with trolley “Certificate for road traffic” and it is towed by agricultural tractor.

- The hydraulic system is with temperature controlled.

- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.

- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.

- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.

TECHNICAL DETAILS

mm

Ø 590 X 28

mm ( A X B )

220x150

POWER 38 CV

Kooler 2 Cylinder Air Cooler

(made in USA)

Quantity knives

2

di produz. Dell’azienda

KG

460

Production (m³/h)

Min 10 Max 16

Ø(mm) MAX

to chip

125

Dimensions

(mm)

A - B - C 126 - 135 -165

WOODCHIPPER GALAXI MT225DT

2 FEED ROLLERS

CHIPPING TOOLS DISCS

Multifunctional Disc PATENT VR2013A000103

Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.

Multifunctional Disc

Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.

Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width

Woodchipper - Ø max to chip 225 cm - Plugged through P.t.o shaft

- Galaxi MT225DT is designed to work with dry and green woods for satisfy also the extreme demands of operators.

- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.

- Galaxi MT225DT has a force-feeding of product guarantee by 2 rolls with hydraulic action.

- this version is of the type towed with trolley “Certificate for road traffic” and it is towed by agricultural tractor. it has a side frame for to have the side loading, and it is complete with connection for towing trailer agriculture.

- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.

- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.

- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.

TECHNICAL DETAILS

mm

Ø 820 X 40

mm ( A X B )

290x250

Power needed (CV)

da 75 a 160

Quantity knives

2

di produz. Dell’azienda

KG

950

Production (m³/h)

Min 12 Max 25

Ø(mm) MAX

to chip

225

Dimensions

(mm)

A - B - C 360 - 149 -288

CHIPPER MULTIFUNCTION OMEGA M4: - OMEGA M4

CHIPPER MULTIFUNCTION FUSION: - FUSION C155 DS / M175 DS MACHINES FOR MAKING PELLETS

- P200 PTO/MOTOR - P400 PTO/MOTOR

-------------------------------------------------------------------------------------------------------------------

MODELS HYDRAULIC CHIPPERS

- GALAXI HY100 - GALAXI HY120

-------------------------------------------------------------------------------------------------------------------

MODELS TITANO CHIPPERS

- MOTOR - PTO

CALIBRATE CHIPPER OMEGA M4 IS DESIGNED FOR THE PRODUCTION OF CHIPS SUITABLE FOR:

Mode Green

1° DISPOSAL PRUNINGS green and wet

Mode Chips 2° PRODUCE STANDARD CHIP

from 5/6 to 15/25 mm for boilers with cochlea over Ø 80 mm

Mode Calibrated

3° CHIPS FOR BURNINGS CALIBRATED of 6x6, 8x8, 10x10

from: boilers with feeders from 40/60 mm, pomace boilers, pellet

boilers and thermal chimneys.

Modalità Transformation

4° PRODUCE MICRO CHIPS suitable for machines for the production

of PELLET.

Woodchipper grader - Ø max to chip 150 mm - Actuated P.t.o. Agricola

From experience of chippers Hércules and Galaxy born the Super Calibrate Chipper OMEGA M4

- The chipper OMEGA M4 is designed for to work green and dry products, with extreme precision in the transformation of wood products in chip for boilers and micro-chips for produce pellets.

- The need to provide boilers with small power supplies, a calibrated chipped and perfect in the form, makes of OMEGA M4 the chipper that satisfies every user.

- The project is the result that realizes the dream of thousands of users.

- The chipper /sizer OMEGA M4 is made from a fantastic project, and has its secret is in the group of chipping / calibration; is equipped with a revolutionary system of ejection, which guarantees perfect operation in all conditions with every type of product, even to what you're thinking !!!

TECHNICAL DETAILS

TYPE

Multi-Air “Brevettato”

mm

( A X B )

230x170

Power MIN request (CV)

From 45 CV

Quantity Knives

2

KG

580

Production (m³/h)

Min 8 Max 21

Ø(mm) MAX

chipping

155

Tools Calibration

N° 36

THE MULTIFUNCTIONAL WOODCHIPPER FUSION IS REALIZED WITH INNOVATIVE SYSTEM OF FEED-CHAIN

- Woodchipper FUSION is designed for chipping green and dry products and thanks to the Feeding special with chain allow to satisfy also the EXTREME DEMANDS OF THE MAINTENANCE.

- Woodchipper FUSION have a “NEW SYSTEM OF KNIVES” with 4 blades with a strong ventilation studing for disposal also of green prodcuts. The particular “control lever” allow to have an easy and quickly control on the feed.

MODELS TECHNICAL FEATURES

C155DS

Ø670 / 32mm

mm ( A X B )

230x170

Power MIN request (CV)

da 25

Quantity Knives

4

KG

535

Production (m³/h)

14 - 24

Ø(mm) MAX

Chipping

155

M175DS

Ø670 / 32mm

mm ( A X B )

230x170

Power MIN request (CV)

da 45

Quantity Knives

4

KG

580

Production

(m³/h)

14 - 30

Ø(mm) MAX

Chipping

170

CIPPATRICE GALAXI HY 100-120

2 FEED ROLLER

SISTEMA IDRAULICO INNOVATIVO

Disco Multifunzione

Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.

Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width

Woodchipper - Ø max to chip 120 cm - Plugged through P.t.o shaft

- Galaxi HY100/120 is designed to work with dry and green woods for satisfy also the extreme demands of operators.

- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.

- Galaxi HY100/120 has a force-feeding of product guarantee by 2 rolls with hydraulic action.

- this version works on 3-point hitch universal of 1° and 2 ° Cat.

- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.

- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.

- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.

TECHNICAL DETAILS

WIEDEMAN

HY 100

mm

POWER REQUIRED l/min IDR

Quantity knives

KG

Production (m³/h)

Ø(mm) MAX Cipp.

Dimensions (mm)

Ø 600 X 30

40/50

160 BAR

2/6

395

Min 6 Max 12

100

A - B - C 126 - 120 -165

HY 120

Ø 600 X 30

70/70 160 BAR

2/6

398

Min 8

Max 16

120

A - B - C 126 - 120 -165

MACHINE PELLET P200 PTO / MOTOR

DRAWING WITH 2 WHEELS OF COMPRESSION

- VERS. PTO 540 15/30 CV Prod.120/190 - VERS. WITH ENGINE LOMBARDINI DIESEL 2 CYLINDERS 18 CV Prod.120/190 - feed hopper - Cart with wheel for movement - 2 Toothed wheels for Compression - Special calibrator device ø280 for hard materials

MACHINE PELLET P400 PTO / MOTOR

DRAWING WITH 4 WHEELS OF COMPRESSION

- VERS. PTO 540 25/50 CV Prod.280/390 - VERS. WITH ENGINE LOMBARDINI DIESEL 4 CYLINDERS 36 CV Prod.280/390 - feed hopper - Cart with wheel for movement - 2 Toothed wheels for Compression - Special calibrator device ø280 for hard materials.

WOOD-CHIPPER TITANO

- VERSION PTO 15/20 CV - VERSION Petrol HONDA 11,7 CV Maximum diameter max 80 mm

N° knives 2 adjustable + 2 counterknives

discharge pipe adjustable

wheels for movement

Safety protection “CE”

Extra blade for Sifting Grid selector NEW Control feed manual