Wolk - Token Generation Event via MyEtherWallet This document explains how to participate in Wolk Token Generation Event via MyEtherWallet. Step 1: Open Chrome browser in Incognito mode.

We recommend Chrome or Chromium-based browsers for all contributions. Step 2: Go to https://www.myetherwallet.com/. The page should look like this:

Step 3: Go to the “Send Ether & Tokens” tab.

*NOTE: For the sake of the tutorial we are using the Node: Ropsten, which is the test network.

When actually participating in the Token Generation Event, USE: ETH (MyEtherWallet). During the TGE please select 25 Gwei from the dropdown.

Unlock your wallet by uploading the Keystore file, filling in your password, and pressing “Unlock”.

You should see this page below with a blank “To Address”, “Amount to Send”, and “Gas Limit” field.

Step 4: Input the domain name wolkinc.eth into the “To Address” field. The contract address that appears below the field should exactly match the one obtained from the website here - http://wolk.com/app/wolktoken.

Step 5: Fill in “Amount to Send” with the amount of ETH you wish to participate for WOLK tokens *Note We are demonstrating with 1 Ropsten ETH here.

Step 6: The “Gas Limit” field will be automatically filled in, however we recommend using 150000 for the gas limit.

We also recommend changing the “Gas Price” in the top right hand corner to 25 Gwei. (The higher the gas price, the faster your transaction will be processed and the more expensive it will be. Use no more than 49 Gwei for gas price.) Step 7: Click “Generate Transaction”.

Then “Send Transaction”

The following message will pop up. Click “Yes, I am sure! Make transaction” to proceed.

Step 8: A green box will pop up at the bottom of your browser. Click on “Verify Transaction” to verify your transaction and see if it was processed successfully on Etherscan.

You can also click on “Check TX Status” to verify it on MyEtherWallet

Transaction may take a couple minutes to process and will temporarily show as “pending”. Once processed, you will see WOLK tokens being transferred backto your account. Congratulation! You have successfully participated in Wolk Token Generation Event!

(Optional) Step 9: To view your Token Balance, click “Add Custom Token” on the left.

In the Address field use the domain name wolkinc.eth. The contract address that appears should match exactly the one listed on our website.

For the Token Symbol field use WOLK.

In the Decimal field type in 18 and hit Save.

After you saved the page should display the following:

Congratulations on becoming a WLK holder!