WLAN WIRELESS LOCAL AREA NETWORKING LAB WNL06

5GHz 802.11 a/n Wireless Networking Lab WNL06 Hardware Features:* Turbo, 802.11a and 802.11n IN ONE* Operates in 5 GHz wireless bands* Extended distances, higher speeds , higher output power* FCC and CE approval* Router OS L4/Firewall routing* MIPS32 4kc 175MHz embedded* 16MB SDRAM* 64MB onboard NAND storage* One 10/100 ethernet port Auto MDI/X* Power over Ethernet

Software Features:* Best wireless performance * Powerful QoS control * P2P traffic filtering * High availability with VRRP * Bonding of Interfaces * Smaller and Less resource-hungry * Stateful firewall, tunnels * STP bridging with filtering * High speed 802.11a/n wireless with WEP/WPA * WDS and Virtual AP * HotSpot for Plug-and-Play access * RIP, OSPF, BGP routing * remote WinBox GUI and Web admin * telnet/mac-telnet/ssh/console admin * real-time configuration and monitoring* Autonetwork discovery and layout* Device, Link monitoring and notifications* Individual link monitoring and graphs

Why choose Amitec? * Cost effective solution * Industry Standard Equipment* High-speed wireless data links (Up to 200Mbps) * Connection distance up to 10 km without repeater sites. * IP - NAT, Routing, DHCP * Security - Firewall, Secure Tunnels * Control - Queues, Proxy, Accounting, HotSpot * Fast and simple installation for base station and clients * Ability to setup any of the wireless links alternatively

Wireless links

High-speed wireless systems are used to provide internet access to end-users using point-to-point or point-to-multipoint architecture. Wireless data links take place where there is no infrastructure for internet access or in places where bandwidth offered by current channels is too low. With our wireless equipment you can get high bandwidth on a very long distances at very reasonable price. Our equipment provides various features including firewall, NAT, VPN, Bandwidth Management, QoS and many more.

Point-to-point links

PtP links are an excellent way to make connections between two sites and achieve high data transfer speeds. This is an ideal way to connect two offices. Also these type of wireless links are very useful if you need to create backbone link from some distant radio access point to your main Internet source.

Point-to-multipoint setup

PtM connections are the most usual way wireless ISPs connect their customers. They put access point somewhere high in the tower above the city or on some high building and then point their client antennas to this access point. Backbone link + AP

This is a point to multi-point link with additional wireless cards and antenna for a backbone connection. Such links are useful when creating a WISP infrastructure, for example you have main Internet source with 5 GHz base station and lots of 2.4 GHz clients in various sides of the city. Such kits can be put in localized parts of the city and contain 5GHz omnidirectional antenna and 5 GHz directional antenna to main base station.Wireless Distribution System

WDS Wireless Distribution System is the best way to interconnect many APs and allow users to move around without getting disconnected from network. Using this system you can cover large areas and allow users to move for large distances while still being on-line. This system allows packets to pass from one wireless AP (Access Point) to another, just as if the APs were ports on a wired Ethernet switch. APs must use the same standard (802.11a, 802.11b or 802.11g) and work on the same frequencies in order to connect to each other.

Mfd by: Amitec Electronics Ltd.Regd. Off: 504, Nilgiri, 9 Barakhamba Road, New Delhi-110001, India, Works: 4/32, Site-4, Industrial Estate Sahibabad, NCR-201010, India, mail@amitec.co, www.amitec.co+91-11-41505510, +91-120-4371276

Description:The wireless transceiver has up to 250mW output power. It works on 4.920-6.100GHz frequency range and supports Turbo mode for faster transfers. It is optimized to work with proprietary wireless protocol to reach extra long distances at a great speed to overcome speed and distance limitations of IEEE 802.11 standards and to extend point-to-point and point-to-multi point wireless link performance. The new protocol designed to provide real full-duplex communications over wireless with a pair of wireless systems one for transmitting data and one for receiving.

Technical Specifications:

Client 5GHz router X5 nosAccess Point 5GHz router X 1nosStandards IEEE802.11a, IEEE802.11b, IEEE802.11g Media Access CSMA/CA with ACK architecture 32-bit MACSecurity Hardware-based 64/128 bit WEP, TKIP and AES-CCM encryption, WPA, WPA2, 802.1xWi-Fi WECA CompliantCertifications FCC, ECSupported OS Router OS, Windows XP, GNU/LinuxTools / Utilities Winbox configuration tool, Network monitor, Trafr sniffer reader for linux, Bandwidth test tool for Windows, Neighbour viewer for Windows

Product Access point OmniQty 1pcThroughput 200Mbit aggregateCPU Atheros Ar7241 400MHz Network Proc.Boot loader RouterBOOTData storage 64MB onboard NAND memory chipRAM 32MB DDR Onboard memoryAntenna Two 7.5dBi (+/-1dBi) omni with V/H Pol. (Ch0 horizontal, Ch1 vertical polarization)TX power 26dBm/400mWArchitecture MIPS-BELAN ports 5 Nos 10/100 Fast Ethernet port with Auto-MDI/X, L2MTU frame size to 2030Integ. Wireless YesWireless 802.11a/n 5GHz 2X2 MIMO built inUSB Yes 2.0Sense Current Monitor, Reset switch, Beeper, Temperature monitor, PoE Passive 8-30V, 16kV ESD protectionLEDs 5 programmable LEDs (Ethernet activity by default), one power LEDDimensions 400x150x75mmOS Router OS v5 and aboveTemperature -30C to +70COS License Level4Ethernet throughput

Fwall Ctrack Mode Mbps Fps Mbps Fps Mbps Fpsoff off Bridging 47.1 92000 358.4 87500 452.9 37300on off Routing 37.6 73600 294.9 72000 452.9 37300on off Bridging 35.4 69300 230.2 56200 446.9 36800on on Routing 28.4 55500 222.4 54300 445.6 36700on on Bridging 18.9 37000 149.5 36500 425.0 35000

Wireless Specs

Modulations OFDM: BPSK, QPSK, 16 QAM, 64QAM DSSS: DBPSK, DQPSK, CCKRX sensitivity 802.11a: –96 dBm@ 6Mbps to -80 dBm@ 54 Mbps 802.11n: –96 dBm @ MCS0 to –77 dBm @ MCS7TX power 802.11a: 26dBm @ 6Mbps to 22dBm @ 54 Mbps 802.11n: 25dBm @ MCS0 to 19dBm @ MCS7

Technical Specifications:

Product Integrated outdoor CPE/PtPQty 5pcs Features 5GHz, High power wireless, 802.11n, DualCPU Atheros AR7241 400MHz CPUMemory 32MB DDR SDRAM onboard memoryData storage 64MB onboard NAND storage chipEthernet 1 10/100 ethernet port, L2MTU frame to 4076Wireless Onboard dual chain 5GHz 802.11a/n Atheros AR9280 wireless module; 16kV ESD protection on each portUSB Yes 2.0 Sense Reset switch, Beeper, Voltage monitor, Temperature monitor, LEDs Power, Ethernet, 5 wireless signal Power Power over Ethernet: 8-30V DC 24V DC 0.8A power adapter and passive PoE Dimensions 150x150x75mmTemperature -30C .. +80COS Router OS v5, Level3 licenseCertifications FCC, CE, ROHS

Ethernet throughput

F.wallCtrack Mode Mbps Fps Mbps Fps Mbps Fpsoff off Bridging 49 97K 99 24300 99.58 8200on off Routing 34 66K 99 24300 99.58 8200on off Bridging 30 60K 99 24300 99.58 8200on on Routing 25 50K 99 24300 99.58 8200on on Bridging 18 35K 99 24300 99.58 8200

AntennaType Dual polarization 5GHz Directional antennaFrequency 5.17 - 5.825 Ghz Gain 16 ± 2 dBiVSWR, max 1.7:13 dB Beam-Width, H-Plane, typ. 25 °3 dB Beam-Width, E-Plane, typ. 25 °Polarization Dual Linear (V-pol, H-pol)Isolation - 35 dB Port to Port

Protocol Data rate TX Power802.11a 6 Mbit/s 26dBm 54 Mbit/s 22dBm802.11n 1 stream MCS0 20MHZ 25dBm MCS0 40MHZ 25dBm MCS7 20MHZ 19dBm MCS7 40MHZ 18dBm802.11n 2 stream MCS8 20MHZ 25dBm MCS8 40MHZ 25dBm MCS15 20MHZ 19dBm MCS15 40MHZ 18dBmProtocol Data rate RX Sensitivity802.11a 6 Mbit/s -96dBm 54 Mbit/s -80dBm 802.11n1 stream MCS0 20MHZ -96dBm MCS0 40MHZ -92dBm MCS7 20MHZ -77dBm MCS7 40MHZ -74dBm802.11n 2 stream MCS8 20MHZ -96dBm MCS8 40MHZ -92dBm MCS15 20MHZ -77dBm MCS15 40MHZ -74dBm

WLAN WIRELESS LOCAL AREA NETWORKING LAB WNL06

Mfd by: Amitec Electronics Ltd.Regd. Off: 504, Nilgiri, 9 Barakhamba Road, New Delhi-110001, India, Works: 4/32, Site-4, Industrial Estate Sahibabad, NCR-201010, India, mail@amitec.co, www.amitec.co+91-11-41505510, +91-120-4371276

Areas of experimentation and scope of study* Study of device drivers* Setting up router* Installing Software* Setting up PtP, PtMP, BB/AP & WDS Wireless links* File transfer protocol FTP server* MAC Telnet Server and Client* Serial Console and Terminal * SSH (Secure Shell) Server and Client* Telnet Server and Client* Terminal Console * Winbox* IP Addresses and ARP * OSPF* RIP* Routes, Equal Cost Multipath Routing, Policy Routing* BGP (Border Gateway Protocol)* Bridge* Ethernet interfaces* FarSync X.21 Interface * FrameRelay (PVC, Private Virtual Circuit) Interface * GPRS PCMCIA * ISDN (Integrated Services Digital Network) Interface* M3P* MOXA C101 Synchronous Interface * PPP and Asynchronous Interfaces* RadioLAN 5.8GHz Wireless Interface * Wireless Client and Wireless Access Point Manual * Xpeed SDSL Interface* EoIP Tunnel Interface * IP Security* IPIP Tunnel Interfaces * L2TP Interface * PPPoE * PPTP* VLAN Interface * Traffic Flow * SNMP Service * Log Management * Bandwidth Control* Packet Marking (Mangle) * Network Address Translation * Services, Protocols, and Ports * DHCP Client and Server * DNS Client and Cache * HotSpot Gateway * IP Pools * SOCKS Proxy Server * UPnP* Web Proxy * Certificate Management * DDNS Update Tool * GPS Synchronization * LCD Management * MNDP* NTP (Network Time Protocol)* RouterBoard-specific functions * System Resource Management* Packet Sniffer* Ping* Scripting Host and Complementary Tools * IP Telephony * System Watchdog Plus lot more.

E-Manual: Installation Video for ease of Learning

Dimension : 75 X 55 x 45 cms.; Weight : 20 KgWarranty: 3 yrs.

WLAN WIRELESS LOCAL AREA NETWORKING LAB WNL06

Mfd by: Amitec Electronics Ltd.Regd. Off: 504, Nilgiri, 9 Barakhamba Road, New Delhi-110001, India, Works: 4/32, Site-4, Industrial Estate Sahibabad, NCR-201010, India, mail@amitec.co, www.amitec.co+91-11-41505510, +91-120-4371276