1

Features > 10/100/1000 Mbps Gigabit Ethernet Ports

> Dedicated SFP slots for longer connectivity via fiber uplinks and for uplink redundancy and failover

> IEEE 802.3af/at Power-over-Ethernet support providing flexibility and simplicity for device deployment

> Network Troubleshooting, Monitoring, & Email Alerts

> Configure, manage & monitor up to 50 Neutron EWS APs locally via Controller Mode

> Centrally manage wired & wireless networks via ezMasterTM

> Security: Access Control List/Port Security; 802.1X & RADIUS Authentication

> IGMP and MLD snooping provides advanced multicast filtering

> 802.3ad Link Aggregation (LACP) supports traffic load balancing

> Voice VLAN for fast, reliable deployment of VoIP services

> Advanced QoS with IPv4/IPv6 ingress traffic filtering (ACLs) & prioritization

> Energy Efficient Ethernet (802.3az) improves energy savings with compliant devices

> Dual firmware images improves reliability & network uptime

> Standard-based technology, ensuring interoperability with any standard-based devices in the existing network

Simplified Management & Optimal Network Performance for Small-to-Mid-Size Organizations The EnGenius Neutron PoE Gigabit Managed Smart Switches with WLAN Controller featuring 8-, 24- or 48- PoE Gigabit ports and support full Layer 2 manageability.

The Switches offer simplified network configuration, monitoring, and management options plus ezMaster™ Centralized Network Management Software, a robust, easy-to-use Web-based tool.

Enterprise-class features optimize network efficiency ensuring peak performance while reducing expenses for cost-conscious SMB organizations.

Whether installed in small or mid-size organizations such as medical offices, warehouses, or large homes, the Smart Switch’s design and easy-to-use interface enables effortless and efficient deployment and operation. Organizations with limited IT support and budgets can create a reliable, efficiently managed network in no time.

High Performance Gigabit & Management Flexibility Each of the Switch’s Gigabit Ethernet ports provide seamless, high-speed access for networked devices while reducing bottlenecks that can interrupt communications. The Switch offers deployment flexibility efficiently supporting both wired and wireless networks.

Easy Network Management, Visibility & Troubleshooting Achieve network management, visibility, and troubleshooting locally through the Switch’s on-board Web interface tools or remotely with ezMaster software. Its Network Topology view automatically maps the deployment, displaying device relationships across the infrastructure, and is useful for troubleshooting issues without manual tracking.

Power and Connect Access Points, IP Cameras, VoIP Phone Systems and More Offers greater flexibility to users by delivering standards-based IEEE 802.3at/at to increase network flexibility. Add devices to the existing network infrastructure without additional wire planning or reorganizing of the original network design.

2

Wireless Device Management Quickly discover, configure, and monitor Neutron EWS Access Points and manage up to 50 devices within the local subnet through the Switch’s built-in wireless network controller features.

Centrally Manage the Wired & Wireless Network Remotely manage Neutron EWS Access Points, Switches, and IP Cameras through ezMaster Network Management Software. Centrally manage hundreds of EWS devices across the network regardless of its size or location with no licensing or subscription fees.

VLAN/Voice & Quality of Service Segment the network by departments or traffic types for

increased performance and security with 802.1Q VLAN.

Prioritize compliant VoIP and video traffic using 802.1p Class

of Service (CoS) ensuring high bandwidth, time-sensitive

data is forwarded immediately for clear, smooth voice and

video delivery.

Energy Saving With the Energy Efficient Ethernet (EEE) standard, the

network will automatically decrease its power usage when

traffic is low with no setup required. The switches can also

detect the length of connected cables to automatically

reduce power usage on shorter cable connections.

EnGenius PoE Managed Smart Switch with Wireless Controller

Products Product Description

EWS2910P 8-Port PoE Gigabit Managed Smart Switch w/ WLAN Controller and 2 SFP Slots; 61.6W

EWS5912FP 8-Port PoE+ Gigabit Managed Smart Switch w/ WLAN Controller, 2 GbE Uplink and 2 SFP Slots; 130W

EWS7928P 24-Port PoE+ Gigabit Managed Smart Switch w/ WLAN Controller and 4 SFP Slots; 185W

EWS1200-28TFP 24-Port PoE+ Gigabit Managed Smart Switch w/ WLAN Controller and 4 SFP Slots; 410W

EWS7952FP 48-Port PoE+ Gigabit Managed Smart Switch w/ WLAN Controller and 4 SFP Slots; 740W

EWS7952P 48-Port PoE+ Gigabit Managed Smart Switch w/ WLAN Controller and 4 SFP Slots; 410W

3

EnGenius PoE Managed Smart Switch with Wireless Controller

Models EWS7952FP EWS7952P EWS1200-28TFP EWS7928P

10/100/1000 Mbps Ports 48 48 24 24

100/1000 Mbps SFP Slots 4 4 4 4

RJ45 Console Port 1 1 1 1

PoE Standard IEEE 802.3af/at IEEE802.3af/at IEEE 802.3af/at IEEE 802.3af/at

Total PoE Budget 740W 410W 410W 185W

PoE Capable Port Ports 1-48 Ports 1-48 Ports 1-24 Ports 1-24

Switching Capacity 104 Gbps 104 Gbps 56 Gbps 56 Gbps

Forwarding Mode Store-and-Forward Store-and-Forward Store-and-Forward Store-and-Forward

SDRAM 256 MB 256 MB 256 MB 256 MB

Flash Memory 32 MB 32 MB 32 MB 32 MB

Packet Buffer Memory 1.5 MB 1.5 MB 512 KB 512 KB

MAC Address Table Size 8K 8K 8K 8K

Max Managed APs 50 50 50 50

Models EWS2910P EWS5912FP

10/100/1000 Mbps Ports 8 10

100/1000 Mbps SFP Slots 2 2

RJ45 Console Port 0 1

PoE Standard IEEE 802.3af IEEE 802.3af/at

Total PoE Budget 61.6W 130W

PoE Capable Port Ports 1-8 Ports 1-8

Switching Capacity 20 Gbps 24 Gbps

Forwarding Mode Store-and-Forward Store-and-Forward

SDRAM 256 MB 256 MB

Flash Memory 32 MB 32 MB

Packet Buffer Memory 512 KB 512 KB

MAC Address Table Size 8K 8K

Max Managed APs 50 50

4

Technical Specifications

Performance

Switching Capacity:

- EWS2910P: 20 Gbps

- EWS5912FP: 24 Gbps

- EWS7928P/EWS1200-28TFP: 56 Gbps

- EWS7952FP/EWS7952P: 104 Gbps

Forwarding Mode: Store-and-Forward

SDRAM: 256 MB

Flash Memory: 32 MB

Packet Buffer Memory:

- EWS2910P/EWS5912FP/EWS7928P/EWS1200-28TFP: 512 KB

- EWS7952FP: 1.5 MB

Address Database Size: 8,000 MAC Addresses

Network Ports

EWS2910P

8x 10/100/1000 Mbps Ports

2x 100/1000 Mbps SFP Ports

EWS5912FP

10x 10/100/1000 Mbps Ports

2x 100/1000 Mbps SFP Ports

1x RJ45 Console Port

EWS7928P / EWS1200-28TFP

24x 10/100/1000 Mbps Ports

4x 100/1000 Mbps SFP Ports

1x RJ45 Console Port

EWS7952FP/EWS7952P

48x 10/100/1000 Mbps Ports

4x 100/1000 Mbps SFP Ports

1x RJ45 Console Port

PoE Capability

PoE Standard:

- EWS2910P: IEEE 802.3af

- EWS5912FP / EWS7928P / EWS1200-28TFP / EWS7952FP/EWS7952P: IEEE 802.3af/at

PoE Capable Ports:

- EWS2910P: Ports 1~8 / Up to 15W

- EWS5912FP: Ports 1~8 / Up to 30W

- EWS7928P/EWS1200-28TFP: Ports 1~24 / Up to 30W

- EWS7952FP/EWS7952P: Ports 1~48 / Up to 30W

Total PoE Power Budget:

- EWS2910P: 61.6W

- EWS5912FP: 130W

- EWS7928P: 185W

- EWS1200-28TFP: 410W

- EWS7952FP: 740W

- EWS7952P: 410W

LED Indicators

1 x Power LED

1 x Fault LED

1 x PoE Max LED

1 x LAN Mode LED

1 x PoE Mode LED

Copper Ports: LAN/PoE Mode, Link/Act

SFP Ports: Link/Act, Speed

Software Features

L2 Features

802.3ad Link Aggregation

- Maximum of 8 groups/8 ports per group

Port Mirroring

- One-to-One

- Many-to-One

Spanning Tree Protocol

- 802.1D Spanning Tree Protocol (STP)

- 802.1w Rapid Spanning Tree Protocol (RSTP)

- 802.1s Multiple Spanning Tree Protocol (MSTP)

Static MAC Address

- 256 entries

802.1ab Link Layer Discovery Protocol

IGMP Snooping

- IGMP v1/v2/v3 Snooping

- Supports 256 IGMP Groups

- IGMP per VLAN

- IGMP Snooping Querier

- IGMP Snooping Fast Leave

MLD Snooping

- MLD Snooping v1/v2

- Supports 256 MLD groups

- MLD per VLAN

Jumbo Frame

5

DoS Attack Prevention

BPDU Attack Prevention

Monitoring

Port Statistics

System Log

RMON

Management

Web Graphical User Interface (GUI)

Command Line Interface (CLI)

BootP/DHCP Client/DHCPv6 Client

SSH Server

Telnet Server

TFTP Client

HTTPS

SNMP

- Supports v1/v2c/v3

SNMP Trap

SNTP

Configuration Restore/Backup

Dual Images

Diagnostic

Cable Diagnostic

Ping Test

Trace Route

WLAN Controller Features

Manage up to 50 Neutron Access Points

Access Point Auto Discovery and Provisioning

Access Point Auto IP Assignment

Access Point Group Management

Remote Access Point Rebooting

Access Point Device Name Editing

Access Point Radio Settings

Band Steering

Traffic Shaping

Fast Handover

Fast Roaming

Access Point Client Limiting

Client Fingerprinting

Wireless Security (WEP, WPA/WPA2 Enterprise, WPA/WPA2 PSK)

AP VLAN Management

Technical Specifications

- up to 9216 bytes

802.3x Flow Control

802.3az Energy Efficient Ethernet

VLAN

802.1Q VLAN Tag supported

VLAN Group

- Max 4094 Static VLAN Groups

Voice VLAN

QoS

802.1p Quality of Service

- 8 queues per port

Queue Handling

- Strict

- Weighted Round Robin (WRR)

QoS based on

- 802.1p Priority

- DSCP

Bandwidth Control

- Port-based (Ingress/Egress, 64 Mbps~1000Mbps)

Broadcast/Unknown Multicast/ Unknown Unicast Storm Control

Access Control List (ACL)

Layer 2/3

- Supports Max. 50 Entries (ACL)

- Supports Max. 256 Entries (ACE)

ACL based on

- MAC Address

- VLAN ID

- 802.1p Priority

- Ethertype

- IP Address

- Protocol Type

- DSCP

Security

802.1X

- Guest VLAN

- Port-based Access Control

Supports RADIUS Authentication

Port Security

- up to 256 MAC Addresses per Port

Port Isolation

6

Technical Specifications

VLANs for Access Point- Multiple SSIDs

Secured Guest Network

Captive Portal

Access Point Status Monitoring

Rogue AP Detection

Wireless Client Monitoring

Background Scanning

Email Alert

Wireless Traffic & Usage Statistics

Real-time Throughput Monitoring

Visual Topology View

Floor Plan View

Map View

Wireless Coverage Display

Local MAC Address Database

Remote MAC Address Database (RADIUS)

Unified Configuration Import / Export

Bulk Firmware Upgrade Capability

One-Click Update

Intelligent Diagnostics

Kick/Ban Clients

Environmental Specifications

Temperature Range

Operating Temperature

- EWS2910P: 0 to 40°C

- EWS5912FP / EWS7928P / EWS1200-28TFP / EWS7952FP/EWS7952P: 0 to 50°C

Storage Temperature

-20°C to 70°C

Humidity

5% ~ 95%

Physical Specifications

EWS2910P

Weight: 0.62kg

Dimensions (W x D x H): 240 x 105 x 27 mm

EWS5912FP

Weight: 1.9kg

Dimensions (W x D x H): 330 x 230 x 44 mm

EWS7928P

Weight: 3.6kg

Dimensions (W x D x H): 440 x 260 x 44 mm

EWS1200-28TFP

Weight: 3.8kg

Dimensions (W x D x H): 440 x 260 x 44 mm

EWS7952FP

Weight: 6.4kg

Dimensions (W x D x H): 440 x 410 x 44 mm

EWS7952P

Weight: 5.94kg

Dimensions (W x D x H): 440 x 260 44 mm

Package Content

EWS2910P

- EnGenius Switch

- Power Adapter

- Wall-mount Kit

- Quick Installation Guide

EWS5912FP / EWS7928P / EWS1200-28TFP / EWS7952FP/EWS7952P

- EnGenius Switch

- Power Cord

- Rack-mount Kit

- Quick Installation Guide

Features and specifications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. For United States of America: Copyright © 2017 EnGenius Technologies, Inc. All rights reserved. Compliant with FCC - This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense. Prior to installing any surveillance equipment, it is your responsibility to ensure the installation is in compliance with local, state and federal video and audio surveillance and privacy laws.

Version 1.1— 18/10/2017

HQ , Taiwan www.engeniusnetworks.com Costa Mesa, California, USA | (+1) 714 432 8668www.engeniustech.com Dubai, UAE | (+971) 4 357 5599www.engenius-me.com

Singapore | (+65) 6227 1088www.engeniustech.com.sg Eindhoven, Netherlands | (+31) 40 8200 888www.engeniusnetworks.eu

1

Datasheet

The edge 802.11ac built-in high performance Access Point with MU-MIMO technology for high-density use on multiple applications.

EnGenius Wireless Management Access Point solution is

designed for deploying on the versatile indoor application. To

meet today’s requirement on varied net-working environment,

EnGenius would like to provide the solution as flexible, robust

and effective as the organization they desire.

The state-of-the-art 802.11ac and MU-MIMO technology brings

revolutionary connecting speed and bandwidth for diversity of

multimedia applications. EWS330AP equips with two powerful RF interfaces that support up to 867 Mbps in 5GHz frequency band

and 400 Mbps in 2.4GHz frequency band (with 4ss/VHT40

clients).

Features

> Built-in Turbo Engine solution with a Quad-core powerful chipset solution to process multiple tasks for driving and enhancing per-formance effectively.

> Dual radio 2x2 802.11 ac wave2/ac/a/b/g/n Access Point with multi-user MIMO (MU-MIMO)

> Support up to 867 Mbps in 5GHz frequency band and 400 Mbps in 2.4GHz frequency band (with 2ss/VHT40 clients).

> High powered amplifiers to improve the wire-less coverage and uses a special radio fre-quency pattern to increase its receiver sensi-tivity for improved performance.

> Support 802.11ac Wave 2.0 technology to enhance overall bandwidth and speed to wireless client devices.

> 360° omni-directional antennas to achieve comprehensive coverage for networking cli-ent devices under a pervasive environment.

> Compliance with 802.3af or 48V PoE Input for flexible installation over 100 meters (328 feet)

> Choose an operating mode to meet your management and deployment requirement.

> Airport Terminals

> Warehouse Operations

> College classrooms

> Corporate workspace

> Rail Station

> Shopping Malls

> Resort Properties

> Stadiums & Arena

> Medical Centers

> Luxury Homes & Estates

Wireless Management solution is ideal for deployment in these venues:

2

Provide Consistent Performance

Designed by EnGenius could provide the powerful RF interfaces to assure the reliability of signal strength and sensitivity in a

pervasive environment. The optimist interfaces will provide the evenly coverage to assist users to reduce dead spots in their

WLAN and boost received signal quality to deliver the best 1.26Gbps air performance to wireless client devices.

Carry multimedia content over MU-MIMO Transmit Beam-forming technology

Be a prior AC1300 solution, EWS330AP is not only built in powerful RF interfaces, but it also features advanced Multi-Users

Multiple input Multiple output (MU-MIMO) and Transmit beamforming (TxBF) technologies.

The significant improvement on 802.11ac wave 2.0 is MU-MIMO technology, which enhances a dramatic break-through in

the performance and flexible transmission to wireless client devices. MU-MIMO allows multiple spatial streams to be

allocated to different clients simultaneously, increasing totally throughput, reduce latency, capacity of the WLAN system and

increase spectral efficiency.

Beamforming is a standard in 802.11ac wave 2.0 which allows Access Points to focus energy of multiple antennas to

transmit to a particular client device in that direction of that client. The innovative technology significantly enhances the

higher signal-to-noise ratio and greater throughput of that client .

With MU-MIMO and Beamforming technology, EWS330AP advanced Indoor Access Points could bring more traffic to wireless client devices simultaneous over the longer distance and save time for serving other wireless client devices.

Exquisite RF Management to Achieve Optimal Wireless Performance

To assist client devices to get the optimal performance under a pervasive environment, Band Steering automatically steers

dual-band capable client devices to the appropriate channel, while prefer 5GHz or band balancing works to maintain a

balanced number of clients per Access Point. Configuring multiple Access Points to serve your own devices (BYOD) in

enterprise class wireless LAN environment can enable Fast Roaming to reduce roaming delay time and to secure seamless

connection on VOIP service when mobile devices move between Access Points.

MU-MIMO

Fast Roaming

3

Simplified Management and Configuration over ezMaster or EWS Management Switch

EWS-series managed Access Point is designed to work with EWS-series Wireless Management Switch and ezMaster

management platform for scalable and flexible wireless management application.

Whether you want to manage a few or 1000+ Access Points and switches on network in different locations with different

segment —or 10 to 10,000 concurrent users, the EnGenius ezMaster platform makes these management and configuration

simplified and intuitively over centralizing bulk configuration, provision and monitoring which is the lower operating and

maintenance cost from a local or remote server—or in the cloud.

With the small scope or maximum 50pcs managed requirement, EWS management switch can perform auto discovery to

search EWS managed Access Points. WLAN administrator can easily use individual or cluster settings to fast deploy numbers

of AP with desired settings, saving repetitive configuration tasks.

Via SmartSync Redundancy, if the connection to your ezMaster platform is lost, EWS management switch will automatically

store syslog and statistics from the APs. Then, when the connection is re-established, all information will be re-synchronized

and sent to ezMaster Management platform. Administrators will not miss any statistics and reports.

Securable Portals for different purpose

EnGenius provides Captive Portal to differentiate the authority of users on using Internet access. Considering the value

added function, administrators offer a securable service to serve client devices including to encrypt over database of an

authentication server, customized-branded splash of webpage, simplified logon service, and promoting content and using

polices. Administrators can also use Virtual LAN (VLAN) with Guest Network to isolate each client for avoiding an

unnecessary touch, leaking sensitive data, and enhancing Internet security and reliability.

Restrain Wireless Traffic under a Pervasive Environment

To effective manage the usage of each client devices at a LAN topology, Traffic Shaping controls the bottle of bandwidth to

offer the limited bandwidth for an individual SSID or each client per Access Point. This constraint offers the constant

bandwidth to perform specific applications like VOIP and video streaming fluently and smoothly without air congestion on

each client devices.

Comprehensive Network Protection

With EWS Access Points, your network is protected from attacks at multiple level through advanced wireless encryption

standards such as Wi-Fi Protected Access (WPA and WPA2) which uses a temporal key integrity protocol (TKIP) and

authentication database, IEEE 802.1X with Radius server. EnGenius also offers the advanced encryption standard (AES) to

encrypt traffic between Access Points and client devices. EnGenius wireless management system offers advanced

mechanism to detect and to prohibit threats over Rogue AP detection. Once threats or event are detected, built-in E-mail

Alerts systems will automatically deliver an e-mail notification for administrators to trigger immediate actions on these

networks threats.

4

Technical Specifications

Wireless Radio Specification

Access Point Type: Indoor, dual radios concurrent, 5GHz 802.11 ac 2x2 MIMO is back-wards compatible with 802.11 a/n mode, 2.4GHz 802.11 n 2x2 MIMO is backwards compatible with 802.11 b/g.

SU-MIMO: Two(1) spatial stream SU-MIMO for up to 1,267 Mbps wireless data rate to a single wireless client device under the both 2.4gHz and 5GHz radio.

MU-MIMO Two(2) spatial stream Multiple (MU)-MIMO for up to 867 Mbps wireless data rate to transmit to one(1) two streams MU-MIMO capable wireless client devices simultaneously.

Frequency Radio 2.4GHz: 2400MHz ~ 2835MHz, 5GHz: 5150MHz~5250MHz, 5250MHz~5350MHz, 5470~5725MHz, 5725MHz~5850MHz Support radios and channels will be varied on the configured regulatory domain.

Supported Radio Technology 802.11b: Direct-sequence spread-spectrum (DSSS) 802.11ac/a/g/n: Orthogonal frequency-division multiplexing (OFDM) 802.11n/ac: 2x2 MIMO with 2 streams 802.11ac supports very high throughput (VHT) — VHT 20/40/80 MHz 802.11n supports high throughput (HT) — HT 20/40 MHz 802.11n supports very high throughput under the 2.4GHz radio –VHT40 MHz (256-QAM) 802.11n/ac packet aggregation: A-MPDU, A-SPDU

Supported Modulation Type 802.11b: BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

Transmit Power (Maximum Value) 2.4GHz: 15dBm 5GHz: 15dBm Maximum power is limited by regulatory domain

Tx Beamforming (TxBF) Increasing signal reliability and transmitting distance.

Supported data rates (Mbps) 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 36, 48, 54 802.11n: 6.5 to 300 (MCS0 to MCS15) 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS=1 to 2)

Power

Maximum Power Consumption 11.9W

Power Source Direct DC Input: 12V/1A Power Over Ethernet: 802.3af Input

Antenna

Integrated Antenna) 2.4GHz: 5 .0 dBi 5GHz: 5.0 dBi

Interfaces

Networking Interface One (1) 10/100/1000 BASE-T RJ-45 Ethernet Ports

DC Powering Interface One (1) DC Jack interface

LED Indicators Display system and wireless transmission status

Reset Button Convert Access Point to the Factory default or the Users Default

Mounting

Ceiling Mounting Assemble a mounting bracket for drop ceiling

Wall Mounting Mount Access Point on a flat wall

Mechanical & Environment

Dimensions ( Φ x H) 132.4 mmx 37.4mm

Weight (Without accessories) 179g

Operating: Temperature: 0°C~40°C (32°F~104°F) Humidity: 0%～90% typical

Storage: Temperature: -40°C~80°C (-40°F~176°F) Humidity: 0%～90% typical

Compliance Regulatory

FCC Subpart15 B Subpart C 15.247 Subpart E 15.407

CE EN 300 328 EN 301 893 EN 50385 EN 55032 EN 55024 EN 60601

RED 2014/53/EU

Low Voltage Directive 2014/30/EU

CB IEC 60950-1

5

Technical Specifications

Operating Mode

Managed Mode Cluster setting and centralized management over ezMaster or EWS man-agement switch

Stand Alone Mode Independent services wireless client devices.

Exquisite RF Management

Background Scanning Regular scanning signal level of an environment to provide parameters for performing Auto Transmit power and auto channel.

Auto Transmit Power Automatically adjust power level when EWS access points work at an environment.

Auto Channel Automatically assign a clearly channel to perform RF transmission under a pervasive environment.

Fast Roaming (802.11k) Collect the parameters of neighborhood Access Points to find the optimal AP.

Band Steering Steer client devices to a proper frequency band for getting more band-width and speed under an Access Point.

RSSI Threshold Kick the client which the signal (RSSI) is above the set value from the AP for reducing the interference and optimize the connecting quality.

Optimize Performance

Quality of Service Compliance with IEEE 802.11e standard Prioritizes voice over data for both tagged and untagged traffic Transmit video, voice and data at the same SSID

Power Save Mode Support U-APSD

Pre-Authentication Compliance with 802.11i &11x

PMK Caching Compliance with 802.11i If wireless client devices has authenticated to an access point, it does not perform a full authentication exchange when client devices roaming be-tween access points.

Fast Roaming (802.11r) Use a Fast Transition key to handover between Access Points

Multicast to Unicast Conversion Using the IGMP protocol, an access Point delivers high definition content to a large number of clients simultaneously.

Easy to Management

Multiple SSIDs BSSID support Support 8 SSIDs on both 2.4GHz and 5GHz bands

Captive Portal Differentiate the authority of users on using Internet access

Guest Network Isolate each client for avoiding an unnecessary touch, leaking sensitive data, and enhancing Internet security and reliability.

VLAN Tag Independent VLAN setting can be enable or disable. Any packet that enters the Device without a VLAN tag will have a VLAN tag inserted with a PVID (Ethernet Port VID)

VLAN Per SSID Integrate VLAN ID with a SSID interface to forward packets over the de-fined path.

Management VLAN Feature is enabled with specified VLAN ID, the device will only allow man-agement access with the same specified VLAN ID from remotely location by using protocols such as telnet, SSH, snmp, syslog etc.

Traffic Shaping Controls the bottle of bandwidth to offer the limited bandwidth for an individual SSID or each client per Access Point.

MAC Address Filtering Filter up to 64 sets MAC addresses per SSID

E-Mail Alert Provides a network monitoring tool for administrators to stay informed the configuration change.

Finger Printing The value added solution collect information of client devices including name of devices, IP address, MAC address, Operating system version, transmitting and receiving data, and signal level.

Save Configuration as Users Default Save the customized configuration as default value for different customer demands.

Wi-Fi Scheduler Perform a regular reboot on access point at assigned schedule Perform it to enable or disable 2.4GHz or 5GHz interface from a period time.

SNMP &MIB v1/v2c/v3 support MIB I/II, Private MIB CLI supported

RADIUS AccountingHelp operators to offload 3G to Wi-Fi seamlessly

Wireless Clients listProvide the list to display real status of wireless client devices on this Ac-cess Point.

Comprehensive Protection

Wireless Encryption Standard

Hide SSID in beacons Rogue AP Detection Enable the function to detect the fake access points in the environment.

L2 Isolation Block the communication between the associated clients to communi-cate with other clients from all hosts on the same subnet.

Client Isolation Block/Isolate the communication between the associated clients under the same WLAN.

HTTPS A secure communication protocol can be enabled to allow secure man-agement web access over a computer network.

SSH Tunnel A secure communication protocol can be enabled to allow secure remote shell access or command execution.

6

RF Performance Specification

( (1415151314111511151213141211121113111211

7

Antennas Patterns

2.4GHz H-Plane 2.4GHz E-Plane

5GHz H-Plane 5GHz E-Plane

-35

-30

-25

-20

-15

-10

-5

0

5

015

30

45

60

75

90

105

120

135

150

165180195

210

225

240

255

270

285

300

315

330

345

-35

-30

-25

-20

-15

-10

-5

0

5

2400 MHz

2450 MHz

2500 MHz

Ga

in (

dB

i)

XZ Plane

-35

-30

-25

-20

-15

-10

-5

0

5

015

30

45

60

75

90

105

120

135

150

165180195

210

225

240

255

270

285

300

315

330

345

-35

-30

-25

-20

-15

-10

-5

0

5

2400 MHz

2450 MHz

2500 MHz

XY plane

Gain

(dB

i)

-35

-30

-25

-20

-15

-10

-5

0

5

015

30

45

60

75

90

105

120

135

150

165180195

210

225

240

255

270

285

300

315

330

345

-35

-30

-25

-20

-15

-10

-5

0

5

5150 MHz

5500 MHz

5850 MHz

Ga

in (

dB

i)

XZ Plane

-35

-30

-25

-20

-15

-10

-5

0

5

015

30

45

60

75

90

105

120

135

150

165180195

210

225

240

255

270

285

300

315

330

345

-35

-30

-25

-20

-15

-10

-5

0

5

5150 MHz

5500 MHz

5850 MHz

XY plane

Gain

(dB

i)

8

Physical Interfaces

Models

Standards 802.11ac wave2/a/b/g/n

Frequency 2.4GHz+5GHz

Data Rates 400Mbps + 867 Mbps

Antennas 2.4GHz: 5.0dBi; 5GHz: 5.0dBi

Physical Interface 1 x Gigabit LAN; 1x DC Jack

Radio Chains/Streams 2x2: 2

Features and specifications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense. Prior to installing any surveillance equipment, it is your responsibility to ensure the installation is in compliance with local, state and federal video and audio surveillance and privacy laws.

Version 1.1— 19/07/17

HQ , Taiwan

www.engeniusnetworks.com

Costa Mesa, California, USA | (+1) 714 432 8668

www.engeniustech.com

Dubai, UAE | (+971) 4 357 5599

Singapore | (+65) 6227 1088

www.engeniustech.com.sg

Miami, USA | (+1) 305 887 7378

pg.engeniustech.com es.engeniustech.com

Eindhoven, Netherlands | (+31) 40 8200 888

LED INDICATORS

DC-Jack Reset Button LAN