WJ_A-1600-I_Q110213_W
-
Upload
ashish-kapoor -
Category
Documents
-
view
35 -
download
4
Transcript of WJ_A-1600-I_Q110213_W
J.S.CORRUGATING MACHINERY CO., LTD
Page: 1/14
Address: No.22, Jiangxing Road, Jianghan Economic Develop. Zone, Wuhan, PR. China.
Telephone: +86 27 83529959 Telefax: +86 27 83552189
E-mail: [email protected] Http://www.jspackmach.com
QUOTATION PRODUCT WJ A-1600-I SINGLE WALL CORRUGATING PRODUCTION LINE
CLIENT
ATTN SHAIL AGGARWAL
NO. JSQJITCQ110213 W DATE: Feb 13TH
, 2011
1. COMMODITY NAME, QUANTITY, UNIT PRICE, AMOUNT
IN US DOLLAR
NAME QTY UNIT
PRICE AMOUNT
1. WZJ-A MILL ROLL STAND (INCL. RAIL, CARRIAGE&
TURN PLATE, PNEUMATIC BRAKE )
3 9300
27900
2. DMWL-A SINGLE FACER 1 32300 32300
3. YRA600 PRE-HEATER 2 5000 10000
5. GQ-I OVERHEAD BRIDGE CONVEYER 1 22900 22900
6. YRA600 DUPLEX PRE-HEATER 1 10000 10000
7. RMJ GLUE MACHINE(SIMPLEX) 1 6400 6400
8. ZH-A DOUBLE FACER (9 HOT PLATES) 1 68000 68000
9. SBFY-A SLITTER SCORER (WITH TRIM SHREDDER) 1 23100 23100
10. DHQ CUT OFF(COMPUTER CONTROL) 1 41400 41400
11. JDJ-I STACKER (SIMPLEX) 1 9900 9900
12. ZJD GLUE SYSTEM 1 8900 8900
13. COMPRESSED AIR SYSTEM (SCREW COMPRESSOR) 1 7600 7600
14. PACKAGING CHARGES & INLAND FREIGHT
(40’CONTAINER×4)
4 1500 6000
15. SEA FREIGHT AND INSURANCE 4 4000 16000
16. ERECTION, COMMISSIONING, TRAINING &TEST RUN 3500
17. AIR TICKETS FOR INSTALLATION ENGINEERS 2000
TOTAL: CIF NEW DELHI 295900
2. TOTAL PRICE: CIF NEW DELHI USD295900
3. SHIPPING TIME: 60 DAYS AFTER RECEIPT OF DOWN PAYMENT
4. TERMS OF PAYMENT
--30% OF TOTAL CONTRACT VALUE BY T/T AS DOWN PAYMENT
--70% OF TOTAL CONTRACT VALUE BY T/T BEFORE SHIPMENT
J.S.CORRUGATING MACHINERY CO., LTD
Page: 2/14
Address: No.22, Jiangxing Road, Jianghan Economic Develop. Zone, Wuhan, PR. China.
Telephone: +86 27 83529959 Telefax: +86 27 83552189
E-mail: [email protected] Http://www.jspackmach.com
5. EXPIRY DATE:
THIS QUOTATION WIL BE VALID ONLY FOR ONE MONTH SINCE THE ISSUE DATE
6. TECHNICAL SPECIFICATION SEE ANNEX A
7. SERVICE & OBLIGATION SEE ANNEX B
8....BUYER’S SUPPLY SEE ANNEX C
J.S.CORRUGATING MACHINERY CO., LTD
Page: 3/14
Address: No.22, Jiangxing Road, Jianghan Economic Develop. Zone, Wuhan, PR. China.
Telephone: +86 27 83529959 Telefax: +86 27 83552189
E-mail: [email protected] Http://www.jspackmach.com
1) Name WJ100-1600-A-I Single Wall Board Line
2) Max. Board size 1600mm×3600mm
3) Min. Board size 150mm×550mm
4) Designed Speed 100m/min
5) Economic working Speed 80m/min (Single Wall)
7) Monthly Output 1000 tons (24 working days/ month,16hours/day)
8) Operators required
Single Facer:1; Mill Roll Stand: 1; Forklift:1 ;
Glue Supplying: 1; Double Facer & Glue Machine: 1;
Slitter Scorer & Cut Off: 1; Stacker: 2; Chief: 1.
Total : 9 person/shift
90 g/csm - 180 g/csm (Medium) 9) Paper Grades
110 g/csm - 400 g/csm (Liner)
10) Adhesives required Cornstarch, potato or cassava starch
11) Starch consumption 3-ply board : 10-15g/㎡ 5-ply board : 25-30g/㎡
12) Steam Pressure required 1~1.2 MPa
13) Steam Consumption required Approx. 2500kg/h
14) Installed power capacity Approx :150KW
15) Power required 380V, 50Hz
16) Dimensions Approx. L=60 , W=10m, H=4.5m ( subject to drawing)
J.S.CORRUGATING MACHINERY CO., LTD
Page: 4/14
Address: No.22, Jiangxing Road, Jianghan Economic Develop. Zone, Wuhan, PR. China.
Telephone: +86 27 83529959 Telefax: +86 27 83552189
E-mail: [email protected] Http://www.jspackmach.com
ANNEX A: TECHINICAL SPECIFICATION
SZC800A Rail and Carriage
� Available width: 1400~1800mm
� Paper reel is easily pushed towards mill roll stand
manually.
� The rail is 6000mm long. Main frame is made of 16#
channel steel.
Options
� ZP350 turn-plate, equipped at the rail end close to mill roll stand, permits turnaround of the
paper roll.
WZJ-A Mill Roll Stand (Mechanically)
Main Structure and Features
� Motorized lifting and lowering with
overload protection device
� Motorized clamping/unclamping and
centering with overload protection device
� Manual web tension adjustment
� Conical chuck
� HT200 Iron cast clamping arms
� Solid operation cabinet
Options
� Air compressor should be provided by the Buyer in case it is sold individually
Main Technical Data
� Available width: 1400, 1600, 1800, 2000, 2200mm
� Max. paper roll diameter: Φ1500mm
� Min. paper roll diameter: Φ300mm
� Max. loading capacity at each side: 1800kg
� Total power: 3.7kW
DMWL-A Single Facer (Fingerless)
Main Structure and Features
� Excellent appearance and compact structure
� Vacuum suction Fingerless design provides perfect
flute formation and is free of high-low flutes
� Corrugating roll (with diameters of Φ263/Φ266),
48CrMo alloy steel, and induction hardened with
hardness up to HRC55~60, which provides remarkable
wear resistance and long life
J.S.CORRUGATING MACHINERY CO., LTD
Page: 5/14
Address: No.22, Jiangxing Road, Jianghan Economic Develop. Zone, Wuhan, PR. China.
Telephone: +86 27 83529959 Telefax: +86 27 83552189
E-mail: [email protected] Http://www.jspackmach.com
� Main bearings, lubricated with high-temperature grease, selected to provide outstanding
sealing performance and reliable lubricating.
� Applicator roll loading and unloading are pneumatically controlled with quick response and
excellent impact absorption
� Gap adjustment between applicator roll and doctor roll is accomplished by worm and worm
wheel mechanism
� Self-circulating glue system, applicator roll is immersed within glue pan
� Pressure roll (Φ262.5), applicator roll(Φ210) as well as doctor roll(Φ118), top quality forged
steel, also hard chrome-plated and ground.
� The standard flute height (A=4.7, B=2.65, C=3.7, E=1.6) and flute profile UV unless
marked. Special fluting requirements can be customized.
Options
� Air compressor should be provided by the Buyer in case model is sold individually
Main Technical Data
� Designed speed:45 m/min (electrical heating)
80m/min (steam heating)
� Available width: 1400, 1600, 1800mm
� Available paper width
Maximum 1400 1600 1800
Minimum 750 850 950
� Total power:
26 kW for other heating and 72 kW for electricity-heating (for width 1400, 1600mm),
� 33kW for other heating and 80kW for electricity-heating (for width 1800mm)
YR(T)A 600 Pre-conditioner /Pre-conditioner
Main Structure and Features
� Rotary preheating roll driven by paper with
manual brake enhances heat conduction.
� Motorized wrap angle adjustment, meeting
different paper and working speed.
� Spraying device for pre-conditioner to adjust
moisture content of the fluting paper (No spraying
device in case the line is configured with DWC, DWG and DWH single facer)
Main Technical Data
� Available width: 1400, 1600, 1800, 2000, 2200, 2500mm
� Pre-heater roll diameter: Φ600, Φ900, Φ1000mm
� Wrap angle adjusting range: 600~220
0
� Power: 0.55kW (for wrap roll adjustment), 1.65kW (for preheating roll rotating at setup
speed)
3.55kW (for preheating roll rotating synchronizing with the line speed)
J.S.CORRUGATING MACHINERY CO., LTD
Page: 6/14
Address: No.22, Jiangxing Road, Jianghan Economic Develop. Zone, Wuhan, PR. China.
Telephone: +86 27 83529959 Telefax: +86 27 83552189
E-mail: [email protected] Http://www.jspackmach.com
Overhead Bridge Conveyor
Main structure and Features
� Frame made of channel iron, angle iron and iron plate, the main frame made of І-shaped
steel.
� Handrail and full covered reinforced footplates for safety protection.
� Inclined belt conveyor with cotton belt for single-faced web lifting.
� For DMWL-A single facer, synchronization is realized with chain by single facer, individual
available speed motor for DW-B, while variable frequency motor for other models of single
facer.
� Motorized web running controller
Suction tension control device
� Vacuum suction to tension the web. Vacuum blower force is adjustable.
� Vacuum suction box with width-related suction range.
� Motorized web edge alignment.
� Two sets of operator control panels with one at bridge and the other at glue machine.
RMJ Glue Machine
Main Structure and Features
� Pneumatic pressing with quick acting and non-waste
� Self-circulating glue supplying system with adjustable glue
quantity
� Preheating device quickens glue gelling
� Synchronization with line is kept with external drive source
� High precision engraved and hard-chrome plated applicator roll
(30LPI)
� Hard chrome-plated pressure roll, doctor roll, preheating roll as
well as guide roll
Options
� Air compressor should be provided by the Buyer in case MODEL is sold individually
Main Technical Data
� Available width: 1400, 1600, 1800, 2000, 2200mm
� Max. working speed: 100m/min
ZH-A Double Facer
Main Structure and Features
� Surface ground steel hot plates,
490mm wide, are of inner
whirlpool structure, favorable
for steam distribution
J.S.CORRUGATING MACHINERY CO., LTD
Page: 7/14
Address: No.22, Jiangxing Road, Jianghan Economic Develop. Zone, Wuhan, PR. China.
Telephone: +86 27 83529959 Telefax: +86 27 83552189
E-mail: [email protected] Http://www.jspackmach.com
� Dense weight rolls of heating unit are lifted and lowered as a whole with motorized height
adjustment.
� Dense weight rolls of cooling unit ensure perfect forming quality.
� If configured with mechanical cut-off, the drive unit must be driven with external power
source, while with computerized cut-off, the drive unit is driven with self-power.
� Pneumatic tension for upper belt
� Large engraved drive roll stand (Φ625mm), covered with herringbone wearable rubber
� Hard chrome-plated weight rolls as well as guide rolls
� Hot plates: 9, 13, 17, or 21
Options
� Air compressor should be provided by the Buyer in case model is sold individually
Main Technical Data
� Designed speed: 100m/min
� Available width: 1400, 1600, 1800, 2000mm
� Total power
Width
Hot plates
1400mm 1600mm 1800mm 2000mm
9,13 40 kW 40 kw 48 kw 48 kw
17 48kW 48 kw 48kw 48 kw
21 48kW 58 kw 58 kw 58 kw
SBFY –A Slitter Scorer
Main Structure and Features
� Precision ball lead screws for tools setup
� Manual tool setup
� Adjustable slitting depth and easy blade
disengagement.
� Scoring head introduces whole mechanism design
with little radial and end face run-out
� Self drive source, synchronizing with the line automatically.
� Motorized adjustment for scoring depth to meet different caliper needs
� Motorized lateral adjustment for the whole machine to meet web deviation.
� New thin blade enables clean cutting edge at high speed.
� Automatic blade-regrinding and blade-lubricating devices keep tool-edge sharp during
operation and saves maintenance time.
� Pneumatic lifting and lowering of working station for quick order changeover.
� Male-to-female scoring profile
� 4 outs
Options
� Air compressor should be provided by the Buyer in case model is sold individually
J.S.CORRUGATING MACHINERY CO., LTD
Page: 8/14
Address: No.22, Jiangxing Road, Jianghan Economic Develop. Zone, Wuhan, PR. China.
Telephone: +86 27 83529959 Telefax: +86 27 83552189
E-mail: [email protected] Http://www.jspackmach.com
Main Technical Data
� Available width: 1400, 1600, 1800, 2000, 2200, 2500mm
� Designed speed: 150m/min
� Min. slit-to-slit distance: 125mm
� Min. score-to-score distance: 80mm
� Tool set up precision: +1
� Total power: 8.3kw (without blower) 23.3kw (with blower)
DHQ Cut-off
Main Structure and Features
� One working station for DHQ and two working
stations for SHQ
� Two knife rolls rotate to cut the board with
shearing difference, featuring lower cutting
force and lower noise
� Precision adjustable anti-backlash gears ensure
accurate mesh between knives
� Motorized adjustment for cutting acceleration
and sheet length
� External drive source from main drive unit, synchronizing with the line mechanically
� Knife bars: Φ245, fine-machined & treated with dynamic equilibrium
� Cut knives: Quenched steel, T8A
Main Technical Data
� Designed speed: 80m/min
� Available width: 1400, 1600, 1800, 2000mm
� Cutting length: 500~3000mm
� Cutting precision: ± 2.5mm
� Total power: 1.1 kW (DHQ), 2.2 kW (SHQ)
JDJ Stacker (Simplex/Duplex)
Main Structure and Features
� Simplex for JDJ-I while Duplex for
JDJ-II
� Longitudinal conveying, pneumatic
batching, automatic stacking and
transverse transferring
� Available width:1400~2500mm
� Max. stacking length: 3600mm
� Max. stacking height: 200mm
� Max. matching line speed: 150m/min
J.S.CORRUGATING MACHINERY CO., LTD
Page: 9/14
Address: No.22, Jiangxing Road, Jianghan Economic Develop. Zone, Wuhan, PR. China.
Telephone: +86 27 83529959 Telefax: +86 27 83552189
E-mail: [email protected] Http://www.jspackmach.com
Compressed Air System
� Supply compressed air to the complete line,
keeping stable working pressure.
� Centralized air supplying with air compressing
station.
� Compressed air filtered at the inlet is clean and
stable.
� Individual control of each unit independently of
each other.
� Adjustable pressure with pressure meter for each unit.
� Accessorial copper pipes and PU pipes are wearable.
� Re-filtered and lubricated with oil mist prior to entering each machine.
� Integrated pneumatic and electric control system with one operation panel, featuring easy
and convenient remote operation.
� Two 0.6m3/min air compressors (power: 3.7kW/set) for lower speed single wall production
line.
� Two 0.9m3/min air compressors (power: 5.5kW/set), and 1.5m3 air storage tank for double
wall production line and singe wall line with width more than 2200mm.
� Three 0.9m3/min air compressors (power: 5.5kW), and 2.5m3 air storage tank for triple wall
production line.
ZJD Glue System
� Supply starch adhesive for single facer(s) and glue
machine.
� Horizontal mixer confects the main glue and carrier
glue and then mixes them enough with large volume.
The storage capacity of main glue is 1.42m3, Mixer
motor power is 5.5kW; the storage capacity of carrier
glue tank is 0.57 m3, mixer motor power is 2.2kW.
� Storage tank and supply tank is equipped with mixing device, preventing glue from
depositing. Storage capacity of storage tank is 1000L. Mixer motor power is 1.5 kW.
� Self-circulating glue supplying system with 280L glue return tank on the ground. Automatic
glue level control. The returned glue is pumped to the storage tank with self-priming pump
(power: 1.5 kW) and then flows to relevant equipment, avoiding glue gelling and solidifying
in the glue pan.
� Individual glue preparing system is flexible for glue room layout.
J.S.CORRUGATING MACHINERY CO., LTD
Page: 10/14
Address: No.22, Jiangxing Road, Jianghan Economic Develop. Zone, Wuhan, PR. China.
Telephone: +86 27 83529959 Telefax: +86 27 83552189
E-mail: [email protected] Http://www.jspackmach.com
ANNEX B: SERVICE & OBLIGATION
1. Training
1.1 Training at Seller’s plant
Seller agrees to train the Buyer’s 2 operators at its fabrication plants, assembly plants and
carton plant for 15 days. This training will start at the beginning of the assembly of the contracted
goods and end before shipment. All the expenses of local transportation, accommodation and
training will be borne by the Seller.
1.2 Training at Buyer’s plant
The Buyer’s operators will be trained during the period of installation, commissioning and test
running at the Buyer’s plant.
2. Installation, Commissioning, Test Running and Final Acceptance
2.1 Seller’s personnel
Seller’s 2 qualified technicians will work on the Buyer’s plant for 60 days for installation,
commissioning, test running and final acceptance. The expenses of international & local
transportation, board & lodging will be borne by the Buyer. The expense of international air ticket,
international insurance will be borne by the Buyer and should be transferred to the Seller’s
account before technicians’ departure from China to the destination.
.
2.2 Prerequisites on site
� Machines and parts have been moved out of wooden crates, sitting on site, convenient for
transportation.
� As tools and accessory machinery the Buyer will provide:
Motorised cranes for unloading,
Fork lift trolleys,
General workshop tools – wrenches, screw-drivers, drills, etc,
Tools for plumbing works together with some most popular plumbing joints,
Water and oil tanks, barrels, etc.
� The Buyer will prepare the following - till the date of delivery:
Steam capacity and pressure as stipulated hereinbefore.
Distribution cabinets and cable from the distribution cabinet to the drive cabinet with
specification shown on the cable layout.
J.S.CORRUGATING MACHINERY CO., LTD
Page: 11/14
Address: No.22, Jiangxing Road, Jianghan Economic Develop. Zone, Wuhan, PR. China.
Telephone: +86 27 83529959 Telefax: +86 27 83552189
E-mail: [email protected] Http://www.jspackmach.com
� The Buyer will prepare the following – straight after the date of delivery:
Steam piping – piping and insulation from the boiler to outlets of the machine,
Glue piping – piping from the glue preparing system to all places that need glue,
Water piping – all plumbing work,
Compressed air piping – piping from the compressed air station to all devices that need
compressed air.
� All buildings will be prepared by the Buyer in accordance with the recommended plant layout,
construction to be designed by a qualified architecture designing institute.
� Machinery foundations will be done by the Buyer in accordance with foundation drawing
prepared by the Producer and delivered by the Seller.
2.3 Obligations of the Buyer
The Buyer will make available in time on his own account:
--assistance to the Seller’s personnel for their entry visas
--transportation from the airport to the hotel and vice versa
--boarding and lodging in local comfortable hotel
--any safety rules to be adhered to and other necessary advices
--assistant labor as and when required, also masons or other workmen
--equipment and material required for machine installation and start-up, such as cranes, lifting
--heating, lighting and working power including all items listed in Buyer’s Supply
2.4Installation Program
----The Buyer shall made written information to the Seller about the suitable time to start the
erection of the machines while the Seller is obliged to send a formal installation program to the
Buyer to make preparations to the assembly of the machine.
---- All installation process should be strictly carried out as per installation program, weekly work
progress will be signed by representatives of two Parties. The signatures will prove the respective
responsibilities to the clauses stipulated in the program.
---- The expected installation period is 60 days as per installation program, in the event that
service installation work should be delayed for reasons from the Buyer due to no heating, lighting
and working power, etc. And the buyer is obliged to sign on the installation program for any delay.
All costs arising from such delays will be borne by the Buyer. Additional technician’s installation
salary will be increased up to 75 USD per person per day beyond the expected date laid down in
the contract. While extra 30 days will be allowed, after extension days, all technicians shall be
required to come back to China. The Seller agrees to send other technician while all expenses on
the Buyer’s account including international air ticket, installation charge and so on.
2.5 Obligations and Services of the Seller
The Seller will provide sufficient materials needed for test running as listed below:
--provide sufficient qualified engineers (machine demonstrators/mechanical engineers, electrical
J.S.CORRUGATING MACHINERY CO., LTD
Page: 12/14
Address: No.22, Jiangxing Road, Jianghan Economic Develop. Zone, Wuhan, PR. China.
Telephone: +86 27 83529959 Telefax: +86 27 83552189
E-mail: [email protected] Http://www.jspackmach.com
engineers) for purposes of supervising, set-up, installation, commissioning, training and
production start-up on site
--provide installation reports and test sheets after completion of start-up and acceptance tests of
any machines. Any unusual events or emergencies affecting security of personnel or
quality/accuracy of the machines or the job to be done will be reported immediately.
--guarantee for proper installation of machines and all parts.
--the normal working time for the Seller’s personnel consists of eight hours per day and 48 hours
per week. If necessary and acceptable for both sides, the daily working time may be extended.
--Upon request of the Buyer, one qualified engineer may work at the Buyer’s factory for three
months (more than three months would need to be discussed) after acceptance for further
technical operating support, such as operating and maintenance training, etc. Individual service
contract should be signed between seller and buyer.
3. Quality Guarantee
3.1. Quality Guarantee period: one year after final acceptance
3.2. Within the period of quality guarantee, the Seller is obliged to supply technical assistance to
the Buyer to ensure normal production.
3.3. Within the period of quality guarantee, in case of any defects or malfunctions, which have
been proven to be caused by Seller’s poor materials, designing errors, and poor fabrication and
assembly technology, upon receipt of the Buyer’s information in writing, the Seller will send
its technicians immediately.
3.4. Within the period of quality guarantee, in case of any defects or malfunctions, which have
been proven to be caused by the Buyer using improper material, mis-operating and
maintenance, upon receipt of the Buyer’s information in writing, the Seller will send its
technicians immediately. The international air tickets (if necessary), local transportation and
accommodation will be borne by the buyer.
3.5. After the period of quality guarantee, the Seller ensures plentiful spare parts supply and
prompt after-sale-service.
3.6. Seller’s representative offices will be responsible for after-sale-service as well as spare parts
supply.
J.S.CORRUGATING MACHINERY CO., LTD
Page: 13/14
Address: No.22, Jiangxing Road, Jianghan Economic Develop. Zone, Wuhan, PR. China.
Telephone: +86 27 83529959 Telefax: +86 27 83552189
E-mail: [email protected] Http://www.jspackmach.com
ANNEX C: BUYER’S SUPPLY
For corrugated board line
A. Civil Engineering
--All buildings in accordance with the recommended plant layout, construction to be designed
by a qualified architecture designing institute.
--All machine foundations in accordance with foundation drawing issued by the Seller.
Civil work for machine foundation does not require very high precision. Pit, ditches and
grooves for bolts and/or other machine feet need only engineering positioning (tolerance is
allowed) and easy carpentry for templates. Ordinary building team is capable of execution.
B. Power Supply and Water Supply
--Plant main power supply
--Switch board and distribution cabinet in accordance with the cable layout issued by the
Seller.
--Cable, wire, wire jacket, non-contact breaker, fuse, etc
General electric materials for power supply need to be specified by a designing institute or
skilled electricians.
The detailed power capacity and specification of distribution cabinet differs according to
different machinery configurations. These data will be given in specific cable layout issued by
the Seller.
380V three-phase five-line (3P+N+PE) power system with 50Hz frequency is available in
these machines. Special voltage and frequency should be informed prior to manufacturing.
Make sure the voltage fluctuation of the power network should not be beyond the range of
+5%.
-- Water Supply
For corrugated board line equipment: 10 tons/day
For boiler: 4 tons/hour
C. Material Required for Test Run
--Kraft liner, Test liner and fluting medium
Paper specification for guaranteed working speed:
Paper Grade: not less than B
Moisture content: 10%±1
Kraft liner: 200~250g/m2
J.S.CORRUGATING MACHINERY CO., LTD
Page: 14/14
Address: No.22, Jiangxing Road, Jianghan Economic Develop. Zone, Wuhan, PR. China.
Telephone: +86 27 83529959 Telefax: +86 27 83552189
E-mail: [email protected] Http://www.jspackmach.com
Test Liner: 180~300g/m2
Fluting medium: ≥107g/m2
Terminology about paper:
Kraft liner (K): it is originally made from 100% pure wood pulp. It is used when the
facing paper has to be particularly resistant or when the packaging needs to provide a
strong tear resistance. This liner is usually applied to A, C and B flutes.
Test liner (T): it is made entirely or partly from recycled paper. It is an efficient and
inexpensive grade made from waste paper. It consists of two layers: a thicker substrate
and a more attractive outer ply. Again this liner is mainly applied to A, C and B flutes.
Test 2 (T2) is partly recycled liner paper. Test 3 (T) is fully recycled liner.
Chip (C): waste based liners.
Fully bleached white (BW): fully bleached kraft liner.
Mottled kraft (MK): mottled white kraft.
Oyster (OY): mottled test liner.
Decorative liner (WT): this white-top liner offers a suitable surface for achieving an
attractive print quality, especially for multi-color image designs. Decorative liner
materials are increasingly used on B, E and F flutes.
Fluting medium: it is generally produced using waste based fluting medium (WBF),
semi-chemical fluting (SC) medium is used for enhanced properties.
-- Starch
Cornstarch, potato or cassava starch,tapioca
Normal starch without musty mass
Granularity: 99.6 (any starch lower may cause sediment and waste)
-- Borax, Caustic Soda
Industrial grade Borax and Caustic Soda
D. Hardware & Tools for Erection
--Wrench, screw driver, grip, driller and impact drillers, tools for plumbing, electrical
apparatus.
--Plumbing, joints, tap and faucet, etc.
--Forklift, crane, etc
--Water and oil tanks, barrels, etc.
Including all other necessary general tools and materials for electrical, mechanical and
plumbing work
Special tools to be delivered by the Seller
~ The End ~