WIZ-QS - Sumix Interferometers and Probes.pdf · WIZ-QS Whitelight Single Fiber Interferometer for...
2
WIZ-QS Whitelight Single Fiber Interferometer for inspection of single fiber connectors, ferrules, bare fibers (both PC and APC) in production environment Suitable for volume production Save time with easy ferrule/connector insertion and fixture handling. Fast measurements Measure single fiber connectors and ferrules as quickly as 1.8 seconds with USB 3.0 SuperSpeed connection. Factory precision-aligned fixtures Be free of the necessity to calibrate your fixtures before each use or when changing between fixtures. Autofocus Minimize operator’s actions to just one click. Wide range of applications Inspect single fiber connectors, ferrules, bare fibers, Arinc, MS termini, both PC and APC. One-click operation Save time testing large quantities of connectors in Express Mode. Customizable administrator and user levels Tune inspection process as per your requirements. Compliance with industry standards Verify radius of curvature, apex offset, fiber height and other parameters per IEC, Telcordia or your own Pass/Fail criteria. Interactive 2D and 3D surface profiles Rotate, zoom, scale images to explore surface details as small as 2.7 µm. Convenient test results management Retrieve reports for any connector, filter or examine statistics any time. Device Features and Benefits Software Features and Benefits MaxInspect™ software
Transcript of WIZ-QS - Sumix Interferometers and Probes.pdf · WIZ-QS Whitelight Single Fiber Interferometer for...
WIZ-QSWhitelight Single Fiber Interferometer for inspection of single fiber connectors, ferrules, bare fibers (both PC and APC) in production environment
Suitable for volume productionSave time with easy ferrule/connector insertion and fixture handling.
Fast measurements Measure single fiber connectors and ferrules as quickly as 1.8 seconds with USB 3.0 SuperSpeed connection.
Factory precision-aligned fixturesBe free of the necessity to calibrate your fixtures before each use or when changing between fixtures.
AutofocusMinimize operator’s actions to just one click.
Wide range of applicationsInspect single fiber connectors, ferrules, bare fibers, Arinc, MS termini, both PC and APC.
One-click operationSave time testing large quantities of connectors in Express Mode.
Customizable administrator and user levelsTune inspection process as per your requirements.
Compliance with industry standards Verify radius of curvature, apex offset, fiber height and other parameters per IEC, Telcordia or your own Pass/Fail criteria.
Interactive 2D and 3D surface profilesRotate, zoom, scale images to explore surface details as small as 2.7 µm.
Convenient test results managementRetrieve reports for any connector, filter or examine statistics any time.
Device Features and Benefits Software Features and Benefits
MaxInspect™ software
3532 Seagate Way, Suite 100, Oceanside, CA 92056, USA http://www.sumix.com
E-mail: [email protected] Tel.: (877)233 3385; Fax: (508)300 5526Date modified: 03.21.2017
SpecificationField of view D = 0.75 mm
Lateral resolution 2.7 µm
Best suitable for connectors/ferrules ST, FC, SC, MU, LC, E2000, Arinc, MS termini - PC and APC
Measurement mode phase shift and white light
Scanning and calculation speed 1.8 sec*
Maximum image size 1600 × 1200 px
Power supply external, USB 3.0 cable, 12 V DC power adapter
Weight 3.9 kg (8.6 lbs)
Dimensions (H × W × L)
150 x 120 x 90 mm (5.9 × 4.72 × 3.5 in)
Focus autofocus
Focus range ±1 mm
Sample report for an SC/PC connector: the connector passes by all geometry parameters
* 80 MHz, standard single fiber connector
Smart and ergonomic fixtures with integrated memory chips store service information
